DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS. STRATO LED Driver CONSTANT CURRENT, 0-10V DIMMABLE STRATO 35W LED DRIVERS

Transcription

1 CONSTANT CURRENT, 010V DIMMABLE DESCRIPTION STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED lighting applications. KEY FEATURES Wide Input Range: 120/220240/277V AC Constant Current Output High Efficiency up to 90% Compact Design Trimmable Output Current Settings Dimmable with 010V / 110V Dimmers OverTemperature Protection for LEDs (NTC) Convection Cooled Wide Operating Temperature Range Long Life RoHS Compliant APPLICATIONS AND BENEFITS STRATO is designed for directly powering LEDs in commercial & industrial lighting applications. The product s extremely small form factor and high efficiency makes it suitable for integration into most light fixtures and standard electrical junction boxes. A host of integrated control features: Simplify Light Fixture Design Ease Safety Approval Cycles Lower Fixture Complexity and Cost ~ STRATO LED Driver AC Input +Dim Dim + LED 010/110V Dimmer (110VDC) Source Or Variable Resistor LED Module STRATO s versatile control features: A Temperature sensor (NTC thermistor) protects the LED from overtemperature. A 2 wire Dimming input provides both output trimming, and 10100% Iout Dimming function. Ts Temp Sensor NTC LED Page 1 DS1_STRATO35 Series_Rev14, June 2017

2 CONSTANT CURRENT, 010V DIMMABLE MODEL CODING AND OUTPUT RATINGS Model number Iout Pout Vout Vout Vout Max max (min) (max) (No Load) ma W V DC V DC V DC RSLD0358B RSLD03512A RSLD03516A RSLD0357B RSLD03510A RSLD03512B RSLD03512J RSLD RSLD03512F RSLD03512C RSLD0357C RSLD0359A RSLD RSLD RSLD RSLD RSLD RSLD RSLD RSLD0357A* RSLD03512E RSLD03512G RSLD03513A RSLD0358A RSLD03512H RSLD RSLD RSLD03511A RSLD0359B RSLD0356A RSLD0354A* RSLD RSLD RSLD03503* RSLD RSLD Table 1: Absolute Maximum Driver Ratings * Certain models have lower output set points for compatibility with specific LED modules and arrays. As a result, these units will exhibit lower efficiency and lower power factor than specified herein. Refer to Strato Application Note #3, Output Voltage Range for proper device selection. Page 2 DS1_STRATO35 Series_Rev14, June 2017

3 CONSTANT CURRENT, 010V DIMMABLE INPUT AND OUTPUT SPECIFICATION AC Input Voltage 120/220240/277V AC Device starts and operates at 90V AC at all load conditions /220240/ V AC Input Frequency 47 50/60 63 Hz Input Current 120V AC Rated Load 230V AC Rated Load 277V Ac Rated Load A 120V AC 0.9 Power Factor 1 230V AC with output voltage between 93% and 100% V AC and rated output current 0.9 THD 2 120V AC 20 % 120V AC Half Value time: 100µs Inrush Current 230V AC Half Value time: 80µs 25.5 Apk 277V AC Half value time: 80µs 28.0 Efficiency 120V AC Rated Load 230V AC Rated Load 277V Ac Rated Load Harmonic Current Complies with EN , Class C load >25W with output voltage between 93% and 100% Note 1: Power Factor for models rated 277VAC is >0.9 with max output voltage and rated current only. Power factor for models RSLD0358B and RSLD0357B shall be VAC and 277VAC when measured with max LED load Note 2 Total Harmonic Distortion 120VAC with output voltage between 93% and 100% and rated output current is achieved in the following models only: RSLD03516A, RSLD03513A, RSLD03512A, RSLD03512B, RSLD03512C, RSLD03512E, RSLD03512F, RSLD03512G, RSLD03512H, RSLD03512J, RSLD03511A, RSLD03510A, RSLD0359B, RSLD0358A, RSLD0358B, RSLD0357B, RSLD0357C % OUTPUT SPECIFICATIONS Output Power Rating check Model Coding and Output Ratings table W Output Voltage check Model Coding and Output Ratings table V Output Current check Model Coding and Output Ratings table ma Ripple Current All models measured (Iout_Pkpk/RMS) 45 % Output Regulation 3 ±3 %Iout Startup time With no dimmer connected 500 ms Note 3 For the following models Output regulation is ±5%: RSLD03516A, RSLD03513A, RSLD03512A, RSLD03512B, RSLD03512C, RSLD03512E, RSLD035 12F, RSLD03512G, RSLD03512H, RSLD03512J, RSLD03511A, RSLD03510A, RSLD0359B, RSLD0358A, RSLD0358B, RSLD0357B, RSLD0357C PROTECTION FEATURES Output Over Voltage %V MAX Output ShortCircuit Hiccup, auto Recovery OverTemperature Tc Hiccup, auto Recovery if the PSU exceeds the rated Tc temperature 90 C No Load Check No Load Voltage in Table V Isolation PrimarytoSecondary Reinforced/double Insulation meets IEC/EN Class II Page 3 DS1_STRATO35 Series_Rev14, June 2017

4 CONSTANT CURRENT, 010V DIMMABLE CONTROLS Output Controls: Two dedicated inputs provide control and safety features. Dim: A dimming input can be used to adjust the output setting via a standard commercial wall dimmer, an external control voltage source (1 to 10V DC), or a variable resistor when using the recommended number of LEDs. The input permits 100% to 80% trimming and 100% to 10% dimming. This permits active control of the driver and may be used for trimming and dimming purposes. See Strato Application Note 1 for details on functionality and compatibility with standard industry practices. Ts: The Temperature input may be connected to a 100k NTC thermistor. The thermistor should be located on the LED assembly to monitor its temperature. If the temperature exceeds a predetermined set point, the output current of the module is automatically reduced to regulate the temperature of the LED at a safe level. See Strato Application Note 1 for details. Page 4 DS1_STRATO35 Series_Rev14, June 2017

5 CONSTANT CURRENT, 010V DIMMABLE MECHANICAL DETAILS Packaging Options: I/O Connections: Ingress Protection: Mounting Details: Partially Encapsulated with ABS plastic body enclosure Flying leads, 18AWG on power leads, 20AWG on control leads, 152mm long, 105 C Rated, Stranded, Stripped by approximately 9.5mm and tinned. Double insulation input wires. IP20, UL damp rated Universal Mounting Clips, and 6 mounting locations per package allow installer to choose the most suitable position for the mounting feet. Universal Mount A Patent Pending Design Package: OUTLINE DRAWINGS RSLD035 Dimensions: 70 x 40 x 27mm 2.76 x 1.57 x 1.06in Volume: 75.6cm 3, 4.59in 3 Mass: 142g, 5 oz. Page 5 DS1_STRATO35 Series_Rev14, June 2017

6 CONSTANT CURRENT, 010V DIMMABLE Environmental Specifications Top Case Temperature Range Top case temperature without derating C Ambient Temperature Range As long as Tc temperature is within the limits C Storage Temperature C Operating Relative Humidity Noncondensing 5 95 % Surface Temperature Exposed surfaces temperature under all operating conditions 90 C Cooling Convection cooled Shock EN Operating: Half sine, 30 g, 18 ms, 3 axes, 6x each (3 positive and 3 negative). NonOperating: Half sine, 50 g, 11 ms, 3 axes, 6x each (3 positive and 3 negative). Vibration EN Operating: 5 500Hz, 1gRMS (0.02 g 2 /Hz), 3 axes, 30 min. NonOperating: 5 500Hz, 2.46gRMS ( g 2 /Hz), 3 axes, 30 min. Vibration EN Operating Sine, Hz, 1g, 3 axes, 1 oct/min., 60 min. MTBF Typical Load, 70 C Tc, MIL.HDBK217E 250k Hours Useful Life Nominal VAC, 70 C Tc Nominal Load 50k Hours ELECTROMAGNETIC COMPATIBILITY (EMC) EMISSIONS Phenomenon Conditions / Notes Standard Performance Class Conducted Emission Test at 120Vac Test at 230V AC Test at 277V AC EN55022; FCC Part 15 EN55015 EN55022; FCC Part 15 Class B Class A Radiated Emission Test at 120Vac Test at 230V AC Test at 277V AC FCC CFR47part15 EN55015 FCC CFR47 part 15 Class B Class A Harmonic Current Emissions EN Class C Voltage Changes, Fluctuation and Flicker EN ELECTROMAGNETIC COMPATIBILITY (EMC) IMMUNITY Phenomenon Conditions / Notes Standard Note Equipment for general lighting purposes EMC Immunity Req. EN ESD (Electrostatic Discharge) EN Radiated RadioFrequency electromagnetic field EN Electric Fast Transient / Burst Level ±1.0kV LL EN Surge Level ±1.0kV LL EN Conducted disturbances induced by RadioFrequency fields EN Voltage Dips, short interruptions and Voltage Variations EN Nonrepetitive damped oscillatory transient, Ring wave 2.5kV ANSI C Category A Page 6 DS1_STRATO35 Series_Rev14, June 2017

7 CONSTANT CURRENT, 010V DIMMABLE SAFETY AGENCY APPROVALS Certification Body Safety Standards UL Recognized ANSI / UL8750, 1 st Ed., CSA C22.2 No.25013, 7 th Ed. Models with output voltages <60 V DC include UL and CSA approval (curus) as Class 2 output. LED Driver suitable for dry and damp location IEC/EN Electronic control gear for LED modules Performance Requirements. IEC/EN, , IEC/EN Electronic control gear for LED Modules Safety. To obtain the CE Declaration of Conformity please contact info@efore.com IECEE CB Certified, IEC/EN, , IEC/EN electronic control gear for LED Modules. All models are isolated control gears, SELV equivalent, with internal reinforced insulation as per IEC/EN Drivers to be incorporated in the luminaire. Reinforced/double Insulation meets IEC/EN Class II Specifications appearing in EFORE s catalogues and brochures as well as any oral statements are not binding. All descriptions, drawings and other particulars (including dimensions, materials and performance data) given by EFORE are as accurate as possible but, being given for general information, and are not binding on EFORE. EFORE makes thus no representation or warranty as to the accuracy of such material. We assume no liability other than as agreed in the terms of the individual contracts and we reserve the right to make technical modifications in the course of our product development. Our product information solely describes our goods and services and is in no way to be construed or interpreted as a quality or condition guarantee. The aforesaid shall not relieve the customer of its obligation to verify the suitability of our Products for the use or application intended by the purchaser. Customers are responsible for their products and applications. EFORE assumes no liability from the use of its products outside of specifications. No license is granted to any intellectual property rights by this document. Page 7 DS1_STRATO35 Series_Rev14, June 2017