18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p"

Transcription

1 Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC Converter REDIN1 Description These DINrail mounted power supplies have a robust case, 4mm screw terminal connectors and use high reliability components to give a long, troublefree life. The REDIN1 can be end mounted to save rail space or side mounted for use in lowprofile cabinets. The units can deliver up to 15% startup power and allow n1 parallel operation to increase the continuous output current or for supply redundancy. Relay contacts simplify DC OK monitoring. The REDIN1 series is designed for demanding commercial and industrial applications with UL58, UL695, IEC695 CB report and CE (LVD EMC RoHS) certifications. They come with a full 5year warranty. 1 Watt DINRail Power Supply Selection Guide Part nom. Input Output Output Rated Efficiency Number Voltage Range Voltage Adjustability Current typ. 3VAC full load [VAC] [VDC] [VDC] [A] [%] REDIN REDIN REDIN BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 85VAC Absolute Maximum Input Voltage Input Current Return Voltage Immunity Inrush Current No Load Power Consumption max. 3s, full load 3VAC, full load 1Vout 4Vout 48Vout, cold start 3VAC, cold start 3VAC 18V 35V 65V 4A 6A 1.5W W 3VAC 375VDC 1.5A.65A Input Frequency Range 47Hz 63Hz Output Voltage Trimming 16.67% Power Factor Startup time Holdup time Ripple and Noise (1) 3VAC, full load 3VAC, full load, full load 3VAC, full load 7 C 5 C 7 C 5 C 1Vout 4Vout ms ms ms 4ms 3W 3W 5ms 5ms 1mVpp mvpp 1mVpp 4mVpp 5 C 7 C 48Vout 4mVpp E4736 UL6951 certified UL58 certified IEC/EN6951 certified Notes: Note1: Measured at MHz bandwidth by using a 1 twisted pairwire terminated with a.1µf & 1µF parallel capacitor REV.: 3/18 PDR1

2 REDIN1 REDIN11 Efficiency [%] Efficiency vs. Load 3VAC Power Dissipation [W] Power Dissipation vs Load 3VAC Input Current vs Load Power Factor vs Load over Vin Input Current [A] VAC Power Factor [%] VAC.. REDIN14 Efficiency [%] Load Current [A] Efficiency vs. Load 3VAC Power Dissipation [W] Power Dissipation vs Load 3VAC REV.: 3/18 PDR

3 REDIN14 Input Current vs Load 1.4 REDIN1 Power Factor vs Load over Vin Input Current [A] VAC Power Factor [%] VAC Load Current [A] REDIN148 Efficiency [%] Efficiency vs. Load 3VAC Power Dissipation [W] Power Dissipation vs Load 3VAC Input Current vs Load Power Factor vs Load over Vin Input Current [A] VAC Power Factor [%] VAC Load Current [A] REV.: 3/18 PDR3

4 REDIN1 REGULATION Parameter Condition Value Output Accuracy ±.5% typ. / ±1% max. Line Regulation ±.1% typ. / ±.5% max. Load Regulation % to 1% load.5% typ. / 1.% max. Transient Response 1Hz & 1kHz, 5% duty ±1% typ. / ± 5% max. PROTECTION Parameter Condition Value Input Fuse () internal T5A, slow blow type Short Circuit Protection (SCP) Over Voltage Protection (OVP) Over Voltage Category (OVC) Over Load Protection (OLP) Over Temperature Protection (OTP) Power OK LED Isolation Voltage Isolation Resistance Leakage Current Overload Capability 1Vout 4Vout 48Vout ON (green) OFF (red) Relay Contact Rating I/P to O/P I/P to PE O/P to PE I/P to O/P I/P to PE, 4VAC 5Hz Notes: Note: Refer to local wiring regulations if input overcurrent protection is also required hiccup mode (current limit) 1518VDC, hiccup mode 933VDC, hiccup mode 5865VDC, hiccup mode OVC II Constant power (current limit) 1±5 C, detect on Heatsink of power transistor; shut down O/P, auto recovery after temperature goes down Vout up to 9% of rated Vout Vout down to 8% of rated Vout Max. 3V/1A or 6V/.3 or 3VAC/.3A Resitive Load 3.kVAC / 1minute.5kVAC / 1minute.5kVAC / 1minute 1MW min..1ma typ. /.5mA max. 1.mA max. Pout [%] y 1 Time (x) [s] Pout (y) [%] Maximum loading of automatic circuit breakers Circuit Breaker Typ Circuit Breaker Current ( devices) (3 devices) B 6A 6A 13A C 1A 1A 16A Note: Values could change depending on local mains x 6 Time [s] ENVIRONMENTAL Parameter Condition Value Operating Temperature Range natural convection.1m/s full load 5 C to 55 C refer to derating graph 5 C to 7 C Temperature Coefficient.3%/K Operating Altitude (4) 3m Operating Humidity noncondensing % 9% RH REV.: 3/18 PDR4

5 REDIN1 ENVIRONMENTAL Parameter Condition Value IP Rating IP Pollution Degree (PD) PD Shock 15Hz G, 6min. Vibration 1G /11ms, along x,y and z axis MTBF according to MILHDBK17F, full load, 5 C 3 x 1³ hours Thermal Derating Pout cont. Pout 3VAC cont Ambient Temperature [ C] Short time (3s) Operating Altitude A Ta<6 C B Ta>55 C Operating Altitude [m] B A Notes: Note3: UL Report certified temperature range: 5 C to 5 C. According to RECOM internal qualification the device is rated up to 7 C with derating Note4: UL Report certified operating altitude: 5m. According to RECOM internal qualificaion the device is rated up to 3m. For altitude higher than m, derating 3W for evey 1m, or 5 C/1m SAFETY AND CERTIFICATIONS Certificate Type Report / File Number Standard Information Technology Equipment, General Requirements for Safety Industrial Control Equipment Information Technology Equipment General Requirments for Safety E4736 E4771 SA15816S 1 SA15816S UL6951, nd Edition, 14 CSA C. No , nd Edition, 14 UL58, 17th Edition, 13 CSA C. No , 3rd Edition, 11 IEC6951, nd Edition 5, AM1:9 AM:13 EN6951:6, A11:9 A1:1 A1:11 A:13 EAC RUAT TP TC 4/11 RoHs RoHs 11/65/EU EMC Compliance Report / Condition Standard / Criterion Information technology equipment Radio disturbance characteristics Limits and methods of measurement Information technology equipment Immunity characteristics Limits and methods of measurement Limitations on the amount of electromagnetic intererence allowed from digital and electronic devices Methods of Measurement of RadioNoise Emissions from LowVoltage Electrical and Electronic Equipment in the Range of 9 khz to 4 GHz EN55, Class B, 1 EN554, Class B, 1 47 CFR FCC Part 15, Subpart B: 14 ANSI C63.4: 14 REV.: 3/18 PDR5

6 REDIN1 EMC Compliance Report / Condition Standard / Criterion ESD Electrostatic discharge immunity test Air ±8kV, Contact ±4kV EN614, Criteria B, 9 Radiated, radiofrequency, electromagnetic field immunity test 3V/m EN6143, Criteria A, 6 Fast Transient and Burst Immunity AC Power Port: LNPE ±1kV EN6144, Criteria B, 1 Surge Immunity AC Power Port LN ±1kV, LPE NPE ±kv EN6145, Criteria B, 14 Immunity to conducted disturbances, induced by radiofrequency fields AC Power Port 3V EN6146, Criteria A, 14 Power Magnetic Field Immunity 5Hz, 1A/m EN6148, Criteria A, 1 Voltage Dips and Interruptions Voltage Dips >95% Voltage Dips 3% Voltage Interruptions >95% EN61411, Criteria B, 4 EN61411, Criteria C, 4 EN61411, Criteria C, 4 Limits of Harmonic Current Emissions EN613, Criteria A, 14 Voltage Fluctuations & Flicker EN6133, Clause 5: 13 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case cover aluminium nickel plated steel Dimension (LxWxH) without mounting clip x 33. x 14.4mm Weight 59g typ. Dimension Drawing (mm) DC OK V V N L PE REV.: 3/18 PDR6

7 REDIN Type Terminals and Wiring Screw Connector Solid Wire.56mm Stranded Wire.54mm American Wire Gauge (AWG) Wire Stripping Length Screwdriver (slotted / cross) AWG116 8mm 3.5mm Recommended tightening torque.5nm.8nm Tolerance: X.X ±.5mm X.XX ±.5mm INSTALLATION and APPLICATION Mounting Instruction Mounting 1 Releasing Click 1 REV.: 3/18 PDR7

8 REDIN1 INSTALLATION and APPLICATION Mounting Multiple Power Supplies PARALLEL OPERATION 15mm 15mm leave 15mm gap between supplies 15mm Minimum Abstand L1 L L3 N PE V V DC OK V V DC OK V V DC OK L N PE Load DC OK Single Operation: 1) Make sure that the front panel switch is set to single Use. ) The output voltage can be increased by trim pot to compensate any cable losses. Parallel Operation: 1) Make sure that the front panel switch is set to single Use on each power supply. ) Adjust each power supply to the exact same output voltage with same load and cooling conditions. 3) Set the front panel switches to. Use the same wire length for each power supply (star connection) and energize all units at the same time to avoid triggering overload protection. Derate the maximum output power to 9% of nominal ratings. For operation with more than three power supplies in parallel or series operation, please contact RECOM technical support for advice. REV.: 3/18 PDR8

9 REDIN1 BLOCK DIAGRAMM L N T5A Input Filter Power Stage Output Filter V V PE OTP Shut Down Protection Relay LED DC OK OCP Limit OVP Shut Down Output Voltage Regulation Single / Parallel PACKAGKING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) cardboard box 14. x 5. x 14.mm Packaging Quantity cardboard box 1pcs. Storage Temperature Range 4 C to 85 C Storage Humidity 5% 95% RH The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safetycritical applications without RECOM s explicit written consent. A safetycritical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safetycritical applications. REV.: 3/18 PDR9

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up

More information

4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p

4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up

More information

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection

More information

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel

More information

Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load

Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal

More information

Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter

Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide

More information

Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter

Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal

More information

IEC/EN/UL60950 & CE certified, EN55032 Class B

IEC/EN/UL60950 & CE certified, EN55032 Class B Features Regulated Converter Universal input VAC 3W PCB mount package

More information

Features. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter

Features. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection

More information

Features. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter

Features. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage

More information

Features. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter

Features. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +

More information

Features. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter

Features. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical

More information

Features. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter

Features. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal

More information

Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter

Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise

More information

Note1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)

Note1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1) Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (

More information

Features. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter

Features. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International

More information

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation

More information

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation

More information

Features. Regulated Converter RAC Watt Single Output. AC/DC Converter

Features. Regulated Converter RAC Watt Single Output. AC/DC Converter Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II

More information

Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.

Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter. Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (

More information

Features. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter

Features. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous

More information

Features. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.

Features. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter. Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (

More information

Features. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.

Features. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter. Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (

More information

Features. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter

Features. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout

More information

Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)

Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second) Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1

More information

High power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options

High power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC

More information

Load (2) Single or Dual

Load (2) Single or Dual Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:

More information

Load (2) Single or Dual

Load (2) Single or Dual Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:

More information

Packaging. nom. Output Voltage

Packaging. nom. Output Voltage Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1

More information

Features. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter

Features. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal

More information

Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter

Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368

More information

Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter

Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1

More information

Features. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter

Features. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter Features Regulated Converter Description Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard

More information

Pinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming

Pinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection

More information

Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual

Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to

More information

Output Current 1.2VDC 1.5VDC 1.5VDC 1.2VDC 1.5VDC 1.5VDC 0.65VDC. Vout=3.6VDC 180µA. Vout=1.8VDC, use E-cap 330µF Vout=3.3VDC and 3.6VDC.

Output Current 1.2VDC 1.5VDC 1.5VDC 1.2VDC 1.5VDC 1.5VDC 0.65VDC. Vout=3.6VDC 180µA. Vout=1.8VDC, use E-cap 330µF Vout=3.3VDC and 3.6VDC. Features Switching Regulator Description The is a DC/DC boost converter designed to run from single cell batteries. The input voltage range of.65v-3.3v means that alkaline, NiCd, NiMH, zinc-carbon or lithium

More information

Features. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter

Features. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter Features Switching Regulator Description Efficiency up tpo 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short

More information

Features. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter

Features. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter Features Switching Regulator Description Efficiency up to 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short

More information

3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications

3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications Features Unregulated Converters Description 3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V- package material Efficiency up to 84% Suitable for IGBT applications The RK and

More information

Note1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load

Note1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The

More information

Features. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide

Features. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1

More information

Features. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.

Features. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual. Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up

More information

Features. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter

Features. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by

More information

DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.

DSA150 Series. xxx Series. 150 Watts.   AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125. 15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty

More information

Output Voltage* (nom.)(adjustable)

Output Voltage* (nom.)(adjustable) Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic

More information

HEC-150RTN-48QSCA. A. Features. B. Description. C. Models. D. Electronic Specifications - Input Specifications

HEC-150RTN-48QSCA. A. Features. B. Description. C. Models. D. Electronic Specifications - Input Specifications HEC130/150RTN48QSCA A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case with

More information

Note1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.

Note1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage. Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series

More information

Note1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.

Note1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage. Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series

More information

Features. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter

Features. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,

More information

Note1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single

Note1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout

More information

HEC-40LTN-XXPSCA Rev A

HEC-40LTN-XXPSCA Rev A HEC40LTNXXPSCA Rev A A. Features High Efficiency (Up to 89%). Active Power Factor Correction (Typical 0.95). Isolation Class II AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP67

More information

TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3

TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3 , Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3

More information

Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter

Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections Description The is a switching regulator with a wide input voltage range, high effi ciency

More information

HEC-100RTA-48QSCA Rev A1.0

HEC-100RTA-48QSCA Rev A1.0 HEC100RTA48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case

More information

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis

More information

Power Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes

Power Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes Features Trailing Edge AC Dimmable Constant Current Output High Efficiency (Up to 86%) Active Power Factor Correction (Up to 0.95) All-Around Protection: OVP, SCP and OLP Description The series operates

More information

CP-E range Benefits and advantages

CP-E range Benefits and advantages Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A

More information

CB Scheme UL508 UL ATEX II3G

CB Scheme UL508 UL ATEX II3G Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up

More information

HEC-45LTN-45PFAS Rev A

HEC-45LTN-45PFAS Rev A A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class

More information

Typical Efficiency (2) Max. Output Power. 24 Vdc 90 ~ 305 Vac 0~1080mA 26 W 84% EUV-026S024PS(3)

Typical Efficiency (2) Max. Output Power. 24 Vdc 90 ~ 305 Vac 0~1080mA 26 W 84% EUV-026S024PS(3) EUV026SxxxPS Features High Efficiency (Up to 86%) Active Power Factor Correction (Typical 0.95) Constant Output Voltage Waterproof (IP66) and Damp Location AllAround Protection: OVP, SCP, OCP Class 2 and

More information

Features. Switching Regulator. 2,3,4 Amp SIP12 Vertical & Horizontal Single Output. R-7xxxP_D. R-7 x. DC/DC Converter

Features. Switching Regulator. 2,3,4 Amp SIP12 Vertical & Horizontal Single Output. R-7xxxP_D. R-7 x. DC/DC Converter Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4Amp adjustable positive step down Integrated switching regulator Over load protection

More information

DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details

DSR120 Series. xxx Series. 120 Watts.   AC-DC Power Supplies. Models & Ratings. Mechanical Details 120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable

More information

Watts HCP Series

Watts HCP Series ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification

More information

Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.

Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max. WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue

More information

HEC-70LCN-350TDAF Rev B

HEC-70LCN-350TDAF Rev B A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Up to 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP Fully isolated metal case with IP20 and dry location. Class 2

More information

Power Factor (1) Efficiency (1)

Power Factor (1) Efficiency (1) LUC012SxxxDSP(SSP) Rev. B Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current High Efficiency Active Power Factor Correction AllRound Protection: OLP, SCP and Open Lamp Protection

More information

Features. Switching Regulator. 1-2 Amp SIP12 Vertical & Horizontal Single Output. R-6xxxP_D. R-6 x. DC/DC Converter

Features. Switching Regulator. 1-2 Amp SIP12 Vertical & Horizontal Single Output. R-6xxxP_D. R-6 x. DC/DC Converter Features Switching Regulator Description Non-isolated Adjustable output voltage 1-2AMP adjustable positive step down integrated switching regulator Internal short circuit protection ON/OFF control (ground

More information

VOF XX - XXX - X

VOF XX - XXX - X date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction

More information

HEC-30/35LTA-33TDAA Rev A

HEC-30/35LTA-33TDAA Rev A A. Features High Efficiency (Up to 86%). Active Power Factor Correction (Typical 0.95). Isolation Class II All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated metal case with IP20 and dry location. 1-10V,

More information

HEC-35LTA-XXTSAA Rev A

HEC-35LTA-XXTSAA Rev A A. Features High Efficiency (Up to 87%). Active Power Factor Correction (Typical 0.95). Isolation Class II. All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP20 and dry location.

More information

Max. Output Power. Typical Efficiency (2) 12 Vdc 90 ~ 305 Vac 0~22.9 A 275 W 91.5% EUV-300S012ST

Max. Output Power. Typical Efficiency (2) 12 Vdc 90 ~ 305 Vac 0~22.9 A 275 W 91.5% EUV-300S012ST EUV300SxxxST Features High Efficiency (Up to 93.0%) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OVP, OCP, SCP, OTP Waterproof (IP67) and UL Dry / Damp

More information

3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)

3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W

More information

C B. Models. Models 2MOPP

C B. Models. Models 2MOPP AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to

More information

Primary switch mode power supplies Product group picture

Primary switch mode power supplies Product group picture Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power

More information

STRATO 70W LED P DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS MODEL CODING AND OUTPUT RATINGS TRC ELECTRONICS, INC

STRATO 70W LED P DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS MODEL CODING AND OUTPUT RATINGS TRC ELECTRONICS, INC STRATO 70W LED P S DESCRIPTION STRATO switch mode driver technology is designed to generate one constant voltage output from a wide range AC input. The size and performance of these products make them

More information

Doc. EA Model Number:

Doc. EA Model Number: VPS-030AAC Series / VPS-030AAC 030AAC Highlights & Features VPS-030AAC05, 12, 15, 24 Meet DOE Level VI & ErP 2017 Low touch current. Suitable for type BF applications Detachable AC plug with multiple country

More information

Max. Output Power. Typical Efficiency (2) 12 Vdc 90 ~ 305 Vac 0~12.5 A 150 W 92% EUV-150S012ST

Max. Output Power. Typical Efficiency (2) 12 Vdc 90 ~ 305 Vac 0~12.5 A 150 W 92% EUV-150S012ST EUV150SxxxST Features High Efficiency (Up to ) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OVP, OCP, SCP, OTP Waterproof (IP67) and UL Dry / Damp /

More information

Features. Switching Regulator. 2,3,4,5 Amp SIP12 Vertical & Horizontal Single Output. R-5xxxPA_DA. R-5 xa. DC/DC Converter

Features. Switching Regulator. 2,3,4,5 Amp SIP12 Vertical & Horizontal Single Output. R-5xxxPA_DA. R-5 xa. DC/DC Converter Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4 & 5AMP adjustable positive step down integrated switching regulator Over load protection

More information

CP-T range Product group picture

CP-T range Product group picture Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details

More information

75W Constant Current (700mA) LED Driver

75W Constant Current (700mA) LED Driver 75W Constant Current (700mA) LED Driver IZC070-075A-9267C-SA Product Overview The IZC070-075A-9267C-SA operates from a 90-305 Vac input range. This unit will provide up to 700mA of output current and a

More information

Output Voltage nom. (adjustable)

Output Voltage nom. (adjustable) Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width Alternative side-mounting for flat panels Active Power Factor High efficiency up to 94% Back power immunity 150% peak current

More information

50W Constant Current (700mA) Dimming LED Driver

50W Constant Current (700mA) Dimming LED Driver 50W Constant Current (700mA) Dimming LED Driver IZC070-050A-9267C-SA Product Overview The IZC070-050A-9267C-SA operate from a 90-305 Vac input range. This unit will provide up to a 700mA of output current

More information

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC) MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature

More information

TMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.

TMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max. TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins

More information

Output Voltage nom. (adjustable)

Output Voltage nom. (adjustable) Industrial Power Supplies TIB Series, 80 480 W Slim profile, for DI-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.5%

More information

Output Current Range. Max. Output Power. 12 Vdc 90 ~ 305 Vac 10.8~13.2V 0~2900mA 35 W 82% EUV-035S012ST(3)

Output Current Range. Max. Output Power. 12 Vdc 90 ~ 305 Vac 10.8~13.2V 0~2900mA 35 W 82% EUV-035S012ST(3) EUV035SxxxST Features High (Up to 86%) Active Power Factor Correction (Typical 0.92) Constant Waterproof (IP67) and Damp & Wet Location AllRound Protection: OVP, SCP, OCP Description The EUV035SxxxST Series

More information

Max. Output Power. Efficiency (1) 110Vac 220Vac

Max. Output Power. Efficiency (1) 110Vac 220Vac LED Driver EUV150SxxxST 20100531 H Features Ultra High (Up to ) High Power Factor (0.99 Typical) 150 W Continuous Power Lightning Protection AllRound Protection: OVP, OCP, SCP, OTP Waterproof (IP67) Comply

More information

CP-T range Benefits and advantages

CP-T range Benefits and advantages Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers

More information

Max. Output Power. Typical Efficiency (1) 12 Vdc 90 ~ 305 Vac 0~8.33 A 100 W 91% EUV-100S012ST

Max. Output Power. Typical Efficiency (1) 12 Vdc 90 ~ 305 Vac 0~8.33 A 100 W 91% EUV-100S012ST EUV100SxxxST Features Ultra High Efficiency (Up to ) High Power Factor (0.99 Typical) Constant Voltage Lightning Protection AllRound Protection: OVP, OCP, SCP, OTP Waterproof (IP67) Description The EUV100SxxxST

More information

VGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION

VGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current 120/277 Vac 12, 24, Vdc 5, 3.92 A Efficiency up to 90% typical Max. Case Temperature 100 C (measured at the hot spot)

More information

Type CP-S, CP-C & CP-A Switch mode

Type CP-S, CP-C & CP-A Switch mode Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting

More information

Max. Output Power. Efficiency (2) 350 ma 249 ~ 528 Vac 107~214Vdc 75 W 87.0% ESC-075S035DT(ST)

Max. Output Power. Efficiency (2) 350 ma 249 ~ 528 Vac 107~214Vdc 75 W 87.0% ESC-075S035DT(ST) ESC075SxxxDT(ST) Features High Efficiency (Up to 87%) Active Power Factor Correction (0.95 Typical) Constant Current Output 010V Dimming Control Input Surge Protection: 4kV lineline, 6kV lineearth AllAround

More information

CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby

CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby ; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in

More information

Electrical Specifications

Electrical Specifications 450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals

More information

Power Factor (1) Efficiency (1) Parameter Min. Typ. Max. Notes A Measured at full load and 100 Vac input

Power Factor (1) Efficiency (1) Parameter Min. Typ. Max. Notes A Measured at full load and 100 Vac input LUC018SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllRound Protection: OVP, SCP and Open Lamp Protection

More information

TB65 65W Single Output Test and Measurement/Industrial Series

TB65 65W Single Output Test and Measurement/Industrial Series Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db

More information

MB120S 120W Single Output Medical Series

MB120S 120W Single Output Medical Series Features 2 x 4 x 1.25 Package, Ideal for 1U Applications 10-year Life design with Premium E-Caps 100 Watts convection cooled Class B Conducted and Radiated EMI performance BF Isolation Type Rated Designed

More information