Generic Requirements for Fiber Optic Attenuators. Contents
|
|
- Leonard Long
- 5 years ago
- Views:
Transcription
1 Generic Requirements for Fiber Optic Attenuators Preface... Preface 1 1. Introduction Document Description Requirements Terminology Requirement Labeling Conventions Numbering of Requirement and Related Objects Requirement, Conditional Requirement, and Objective Object Identification Changes from GR-910-CORE, Issue Organization General Information General Product Description Attenuator Technology Attenuator Applications Environmental Conditions General and Design Criteria Documentation General Documentation Workcenter Information Package Marking, Packaging and Shipping Physical Design Criteria Optical Fiber Optical Connectors Cleanability Intermateability Materials Toxicity Corrosion Resistance Dissimilar Metals Fungus Resistance Flammability Safety Mounting Outside Plant Location Index Matching Change of Attenuation v
2 GR 910 CORE 4. Performance Criteria Environmental and Mechanical Criteria Controlled Operating Environment Uncontrolled Operating Environment Non-Operating Environment Humidity/Condensation Cycling Test Water Immersion Vibration Flex Test Twist Test Side Pull Load Cable Retention Durability Impact Test Optical Criteria Optical Bandpass Change in Attenuation Attenuation Tolerance Attenuation Increments and Range Reflectance Polarization-Dependent Loss (PDL) Polarization-Mode Dispersion (PMD) Damage Criteria Performance Verification/Test Procedures Environmental and Mechanical Testing Controlled Operating Environment Uncontrolled Operating Environment Non-Operating Environment Humidity/Condensation Cycling Test Water Immersion Vibration Test Flex Test Twist Test Side Pull Cable Retention Durability Impact Test Optical Testing Optical Bandpass Change in Attenuation Attenuation Tolerance Attenuation Increments and Range Reflectance Polarization-Dependent Loss (PDL) vi
3 5.2.7 Polarization-Mode Dispersion (PMD) Passive Optical Component Code (POCC) Structure and Format Component Type Character Fiber Type and Operating Wavelength Region Character Cable Type Character Attenuation Value Characters Application Character Configuration Characters Example Reliability and Quality Assurance Program Reliability Assurance Requirements Philosophy Overview of Reliability Assurance Qualification Criteria Characterization Reliability Tests Failure Rate Prediction Optical Adhesives Quality Assurance and Lot Controls Visual Inspection Optical Testing Stress Screening Optical Adhesives Optical Connectors Optical Fiber Quality and Reliability Criteria Reliability Assurance Quality Technology Program References... References 1 Ref.1 Bellcore Documents... References 1 Ref.2 External References... References 2 References... References 7 Glossary...Glossary 1 Acronyms...Glossary 4 vii
4 GR 910 CORE viii
5 List of Figures List of Figures Figures Figure 2-1. The a) Fixed and b) Variable Attenuator Components Figure 2-2. Attenuator Types a) Connector Receptacle, b) Optical Pad, c) Patchcord. 2 3 Figure 2-3. Optical Transmission Using a Variable Attenuator Figure 2-4. Central Wavelength Variation of Uncontrolled Optical Source Figure 5-1. Transmission Measurement Facility Figure 5-2. Controlled Operating Environment Temperature Profile Figure 5-3. Uncontrolled Environment Temperature Profile Figure 5-4. Humidity/Condensation Temperature Profile Figure db Attenuator Optical Bandpass Spectra Figure 5-6. Attenuation Loss Measurement Figure 5-7. Configuration for Measuring Polarization Dependent Loss Figure 5-8. Mechanical Test Facility for Flex, Twist, Side Pull and Cable Retention Tests Figure 7-1. Elements of a Comprehensive Reliability Assurance Program ix
6 GR 910 CORE List of Figures x
7 List of Tables List of Tables Tables Table 4-1. Summary of Attenuator Performance Criteria and Test Sequence Table 4-2. Tensile Loads for Mechanical Tests Table 4-3. Optical Bandpass Criteria Table 5-1. Number of Turns for Twist Test Table 5-2. Side Pull Tensile Loading Table 6-1. Passive Optical Component Manufacturer Code POCC Table 6-2. POCC Character Description Table 6-3. POCC Character S Table 6-4. POCC Character S Table 6-5. POCC Character S Table 6-6. POCC Character S Table 6-7. POCC Interpretation Table 7-1. Test Matrix for Demonstrating Acceleration Factors [Relative Humidity as a Function of Temperature and Absolute Humidity]. 7 6 xi
IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC,
F IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC, LC/UPC) 1. GENERAL This specification covers the requirements of the standard attenuator for single mode optical fiber to be supplied to TOT Public Company Limited
More informationSabritec Qualification Test Report Summary
Sabritec Qualification Summary Qualification of Multimode Fiber Optic Termini, and Type 1, Category 2 Connectors per ARINC Specification 801 QTR #705 03-27-08 Revision Page Paragraph Description of Revision
More informationContents. 1 Introduction. 2 System-Level Electrostatic Discharge (ESD) and Electrical Fast Transient. 3 Electromagnetic Interference
Issue 3, October 2002 Electromagnetic Compatibility and Electrical Safety Contents Telcordia GR-1089 - Documentation Information Generic Requirements Notice Of Disclaimer................. iii Contents.......................................
More informationPreface... Acknowledgments... Glossary Introduction Management Systems and the Management of Chemical Process Safety...
Preface... Acknowledgments... Glossary... xi xiii xv 1. Introduction... 1 1.1 Process Safety Management Activities of the Center for Chemical Process Safety (CCPS)... 1 1.2 Definition of "Process Safety
More informationLSSS-OF FOR. Zero Water Peak Single-Mode Optical Fiber. (Reference: ITU-T G.652.D) Prepared by Eun Kyung Min Engineer Passive Solution Team
PAGE : 1 OF 6 LSSS-OF0007-00 FOR Zero Water Peak Single-Mode Optical Fiber (Reference: ITU-T G.652.D) Prepared by Eun Kyung Min Engineer Passive Solution Team Checked by Yu-Hyoung Lee Manager Passive Solution
More informationDETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC PLUG, CIRCULAR HERMAPHRODITIC, IN-LINE MOUNT, 2 AND 4 POSITIONS, EXPANDED BEAM
METRIC C 9 February 2015 SUPERSEDING C 23 September 2014 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC PLUG, CIRCULAR HERMAPHRODITIC, IN-LINE MOUNT, 2 AND 4 POSITIONS, EPANDED BEAM This specification
More informationUsing the Integrating Sphere in the Multiple Application Platform (MAP)
Application Note Using the Integrating Sphere in the Multiple Application Platform (MAP) Introduction This application note details the specifications, properties and potential applications of the integrating
More informationETK Kablo SPECIFICATION. FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -LWP)
JFT-02857A 1/7 DATE Feb. 22, 2013 NO. JFT-02857A Supersedes JFT-02857 Messrs. ETK Kablo SPECIFICATION FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -LWP) Prepared by H. KIKUCHI Manager Optical Fiber and Cable
More informationJULY 15 Rev A
Product Specifcation 108-2467-1 07 JULY 15 Rev A VITA 66.4 Half-Size Fiber Optic Connectors 1. SCOPE 1.1. Content This specification covers the performance, tests and quality requirements for the TE Connectivity
More informationSPECIFICATION. Optical Fiber Cable
SPECIFICATION Optical Fiber Cable (GYDXTW 24~432) Prepared by Zhang xin Approved by Yao qiang 1 General 11 This specification covers the requirements for the supply of single-mode optical fiber cables
More informationSPECIFICATION. FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -SR15E)
Fujikura DATE Aug. 18, 2008 NO. JFS-00052A Supersedes JFS-00052 Messrs. SPECIFICATION FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -SR15E) Prepared by H. KIKUCHI Manager Optical Fiber and Cable Dept. Global
More informationFeatures. Applications. Package Dimensions
with driver board Features Original patented MEMS structure (US 7535620) Low Insertion Loss Flat WDL Low PDL Low Cross Talk Excellent operating vibration and shock performance Compact package High speed
More informationKeysight Technologies IL and PDL spectra with the N7786B Polarization Synthesizer and the N7700A Photonic Application Suite.
Keysight Technologies IL and PDL spectra with the N7786B Polarization Synthesizer and the N7700A Photonic Application Suite Application Note Introduction The spectral measurement of optical insertion loss
More informationTable of Contents. 1 Introduction. 2 System-Level Electrostatic Discharge (ESD) and Electrical Fast Transient (EFT) 3 Electromagnetic Interference
Electromagnetic Compatibility and Electrical Safety GR-1089-CORE Table of Contents Table of Contents 1 Introduction 1.1 Purpose and Scope.................................. 1 1 1.2 Items Not Covered in
More informationFUSED COUPLER C OR L BAND
Fused Fiber Coupler DATASHEET The fused coupler, C or L band enables the accurate splitting and monitoring of optical signals in single-mode fiber. Gooch & Housego proprietary manufacturing technology
More informationOFS AllWave non-dispersion shifted single-mode optical fiber
The New Standard for Single-Mode Fiber! Product Description OFS AllWave non-dispersion shifted single-mode optical fiber (NDSF) is the industry s first Full-Spectrum fiber designed for optical transmission
More informationQualification Test Report Summary for the Smiths Connectors Solderless EMI Filtered Connector. STR #569 Revision N/C 2/09/09
for the Smiths Connectors Solderless EMI Filtered Connector Revision N/C 2/09/09 Revision Page Paragraph Description of Revision Approval Letter Number / Appendix Date N/C - - Original Release 2/6/2009
More informationOPEN BASE STATION ARCHITECTURE INITIATIVE
OPEN BASE STATION ARCHITECTURE INITIATIVE Appendix F Specification for Slim-I/O Panel Mount Cable to Board I/O Connector Version 1.0 Issue 1-0 1 () 9 10 11 1 1 1 1 1 1 1 19 0 1 9 0 1 9 0 1 FOREWORD OBSAI
More informationDATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 8 Channels nm Dual Fiber CWDM Mux Demux FMU Plug-in Module, LC/UPC
Data Center & Cloud Computing DATASHEET 8 Channels 1470-1610nm Dual Fiber CWDM Mux Demux FMU Plug-in Module, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 01 Overview The CWDM
More informationF i n i s a r. Product Specification C.wire 120 Gb/s Parallel Active Optical Cable FCBGD10CD1Cxx
Product Specification C.wire 120 Gb/s Parallel Active Optical Cable FCBGD10CD1Cxx PRODUCT FEATURES 12-channel full-duplex active optical cable Electrical interface only Multirate capability: 1.06Gb/s to
More informationDATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 4 Channels nm Dual Fiber CWDM Mux Demux FMU Plug-in Module, LC/UPC
Data Center & Cloud Computing DATASHEET 4 Channels 1270-1330nm Dual Fiber CWDM Mux Demux FMU Plug-in Module, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 01 Overview The CWDM
More informationScreen-Tech the screen company
ST-GS Specification FSM-ED-001 Front Surface Mirror for Projection Systems 1.0 Description: This specification defines the quality and performance criteria for a thin film front surface mirror coated product
More information/ On the web: / Telephone: IS-FIBER (800)
Fixed Attenuators Bulkhead Attenuators 68 Series Bulkhead / Feedthru Attenuators provide an economical solution for applications that do not require low back reflection yet will maintain repeatable performance.
More informationDATASHEET. Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET 18 Channels Dual Fiber CWDM Mux Demux + Monitor Port 1270-1610nm, 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 CWDM Mux
More informationProduct Specification 10Gb/s Laserwire Serial Data Link Active Cable FCBP110LD1Lxx
Product Specification 10Gb/s Laserwire Serial Data Link Active Cable FCBP110LD1Lxx PRODUCT FEATURES Single 1.0 10.3125 Gb/s bi-directional link. RoHS-6 compliant (lead-free) Available in lengths of 3,
More informationF i n i s a r. Product Specification Quadwire 40 Gb/s Parallel Active Optical Cable FCBG410QB1Cxx
Product Specification Quadwire 40 Gb/s Parallel Active Optical Cable FCBG410QB1Cxx PRODUCT FEATURES Four-channel full-duplex active optical cable Electrical interface only Multirate capability: 1.06Gb/s
More informationVARIABLE FIBER OPTIC ATTENUATORS BLOCKING PIGTAIL STYLE
VARIABLE FIBER OPTIC ATTENUATORS BLOCKING PIGTAIL STYLE Features: Rugged and compact size Wide wavelength range (from 350 to 2050nm) Singlemode, polarization maintaining and multimode fiber versions Low
More informationProduct Specification Quadwire FDR Parallel Active Optical Cable FCBN414QB1Cxx
Product Specification Quadwire FDR Parallel Active Optical Cable FCBN414QB1Cxx PRODUCT FEATURES Four-channel full-duplex active optical cable Eletrical interface only Multirate capability: 1.06Gb/s to
More informationPOLARIZATION EXTINCTION RATIO MEASUREMENT TEST SETFOR V-GROOVE ASSEMBLIES AND PM PATCHCORDS
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-5415 Tel:(613) 831-0981 Fax:(613) 836-5089 E-mail: sales@ozoptics.com POLARIZATION EXTINCTION RATIO MEASUREMENT TEST SETFOR V-GROOVE ASSEMBLIES
More informationProduct Specification
PRODUCT FEATURES Product Specification 25G SFPwire, SFP+ Active Optical Cable FCBG125SD1Cxx Hot-pluggable SFP+ cable ends Supports 25.7813 Gb/s bit rate SFI limiting interface Input equalization and output
More informationPOLARIZATION EXTINCTION RATIO METER
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-5415 Tel:(613) 831-0981 Fax:(613) 836-5089 E-mail: sales@ozoptics.com POLARIZATION EXTINCTION RATIO METER Features: Measures up to 40dB
More informationBENCHTOP POLARIZATION EXTINCTION RATIO METER
BENCHTOP POLARIZATION EXTINCTION RATIO METER PRELIMINARY SPECIFICATIONS Features: Measures up to 50 db polarization extinction ratios (for specific wavelength range) Very wide wavelength range: 450 to
More informationProduct Specification Quadwire 40 Gb/s Parallel Active Optical Cable FCCx410QD3Cyy
Product Specification Quadwire 40 Gb/s Parallel Active Optical Cable FCCx410QD3Cyy PRODUCT FEATURES Four-channel full-duplex active optical cable Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
More informationDWDM Dual Fiber series
Mn W W E E An Mn An DWDM Dual Fiber Series DWDM Dual Fiber series passive optical components Features Optimized for dual fiber applications Simplified component interconnection system using standard dual
More informationOptical Fiber Jelly. PBT loose tube. PE shealth. Aramid Yarn SINGLE MODE OPTICAL FIBER ITU-T REC. G.652D
SINGLE MODE OPTICAL FIBER ITU-T REC. G.652D Product Model: GYFXTY 2~12C Our Ref: No.TS-FT201107-03-64-V1.0 GENERAL 1.1 These optical cables have excellent protection, optical transmission and mechanical
More informationProduct Specification
PRODUCT FEATURES Product Specification 25G SFPwire SFP28 Active Optical Cable FCCG125SD1Cxx Hot-pluggable SFP28 cable ends Supports 25.7813 Gb/s bit rate Connectivity Diagnostics SFI limiting interface
More informationGS Product Specification. 1 of 19 N. QSFP+ Cable to Board Connector System 1.0 SCOPE 2.0 PRODUCT DESCRIPTION
1 of 19 N 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 2.1 Product Name and Series Number(s) 2.2 Dimensions, Materials, Plating and Markings 2.3 Additional General Specifications 3.0 REFERENCE DOCUMENTS 3.1 FCI Documents
More informationDESIGNING AND DEPLOYING SPECIAL MULTI FUNCTION FIBER OPTIC CABLES
DESIGNING AND DEPLOYING SPECIAL MULTI FUNCTION FIBER OPTIC CABLES Heiner Ottersberg 1 NSW The Company Over 100 Years Experience in Cable Technology 1899 NSW (Norddeutsche Seekabelwerke) is founded by the
More informationMar11 Rev A
1. INTRODUCTION 1.1. Purpose 1.2. Scope Engineering Report PARALIGHT* Active Cable Assembly, 4 Lane PN 2123287 502-1304 14Mar11 Rev A Tests were performed on, QSFP 10 Gbs, 4 lane Active Cable assembly
More informationFOTP-XX. Fiber Optic Splice Loss Measurement Methods. Contents
FOTP-XX Fiber Optic Splice Loss Measurement Methods Contents Foreword ii 1 Introduction 1 1.1 Intent.....1 1.2 Applicability.....2 2 Normative references 2 3 Apparatus 2 3.1 Light source.....2 3.2 Source
More informationArtisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking for more information? Visit us on the web at http://www.artisan-scientific.com for more information: Price Quotations Drivers Technical Specifications. Manuals and Documentation Artisan Scientific
More informationTotal care for networks. Introduction to Dispersion
Introduction to Dispersion Introduction to PMD Version1.0- June 01, 2000 Copyright GN Nettest 2000 Introduction To Dispersion Contents Definition of Dispersion Chromatic Dispersion Polarization Mode Dispersion
More informationProduct Specification. 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL APPLICATIONS
Product Specification 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint 8.5 through 11.3 Gb/s bit rates 40km link length -40/85 C case temperature
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-87819/4A 23 February 2015 SUPERSEDING MIL-PRF-87819/4A 30 September 2009 PERFORMANCE SPECIFICATION SHEET HEADSET-MICROPHONE, HEARING PROTECTIVE TYPE MODERATE AMBIENT NOISE LEVELS, UP
More informationQualification Test Report SlimSeal SSL Connector
Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to
More informationXSD Single Fiber series DWDM passive optical components
XSD Single Fiber DWDM Series XSD Single Fiber series DWDM passive optical components Features Optimized for single fiber applications Simplified component interconnection system using standard dual patch
More informationProduct Specification. 10Gb/s 200km Telecom CML TM 13pin-GPO Butterfly Transmitter DM /1/2
Product Specification 10Gb/s 200km Telecom CML TM 13pin-GPO Butterfly Transmitter DM200-01-0/1/2 PRODUCT FEATURES High Performance CML TM Supports multi-bit-rate application, from 9.95Gb/s to 11.1Gb/s
More informationDATASHEET. Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET 8 Channels 1470-1610nm Dual Fiber CWDM Mux Demux W/Expansion Port, FMU Plug-in Module, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017
More informationAgilent 81980/ 81940A, Agilent 81989/ 81949A, Agilent 81944A Compact Tunable Laser Sources
Agilent 81980/ 81940A, Agilent 81989/ 81949A, Agilent 81944A Compact Tunable Laser Sources December 2004 Agilent s Series 819xxA high-power compact tunable lasers enable optical device characterization
More informationDATASHEET. Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET 18 Channels Dual Fiber CWDM Mux Demux + Monitor Port 1270-1610nm, 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 01 Overview
More informationWavelength Selective Switch (WSS) 1x9
AGILE OPTICAL SWITCHES Wavelength Selective Switch (WSS) 1x9 Applications Wavelength routing/grooming - Ring inter-connect/optical hubbing and add/drop capability 2D to 8D nodes Dynamic bandwidth management
More informationCORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR FlexNAP DISTRIBUTION SYSTEMS: DISTRIBUTION TRUNK, TAP, AND TETHER. July 2018.
July 2018, Revision: Issue Page 1 of 16 CORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR FlexNAP DISTRIBUTION SYSTEMS: DISTRIBUTION TRUNK, TAP, AND TETHER July 2018 Revision: Issue Corning Optical
More informationWave Division Multiplexing. Passive Mux/Demux Modules & Cables. Datasheet. Features. Overview. Typical 2-Channel Passive Mux/Demux Application
Datasheet Passive Mux/Demux Modules & Cables FD Features Multiplexes up to 16 Full Duplex data channels Protocol and topology independent Transparent operation Secure physical separation between data channels
More informationSBM-120-UV. Surface Mount Series. Ultraviolet LED. SBM-120-UV Product Datasheet. Features: Table of Contents. Applications:
SBM-120-UV Surface Mount Series Ultraviolet LED Features: Table of Contents General Considerations...2 Binning Structure...3 Part Numbering...4 Ordering Information...4 Optical and Electrical Characteristics...5
More informationQUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s 2M805 Series Connector
QUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation 40-60 Delaware
More informationGlenair Test Report. ArmorLite Braid ( ) Testing GT Version C 4/11/18
Glenair Test Report GT-17-263 Version C 4/11/18 Glenair, Inc. 1211 Air Way Glendale, California 91201-2497 Telephone: 818-247-6000 Facsimile: 818-500-9912 E-mail: sales@glenair.com United States United
More informationPERFORMANCE SPECIFICATION SHEET
PERFORMANCE SPECIFICATION SHEET METRIC MIL-PRF-49291/11B w/amendment 2 19 July 2016 SUPERSEDING MIL-PRF-49291/11B w/amendment 1 19 November 2015 FIBER, OPTICAL, TYPE II, CLASS 5, SIZE II, COMPOSITION A,
More informationPassive Optical Components for Optical Fiber Transmission
Passive Optical Components for Optical Fiber Transmission Norio Kashima Artech House Boston London Contents Preface Part I Basic Technologies 1 Chapter 1 Introduction to Passive Optical Components 3 1.1
More informationDEPARTMENT OF THE NAVY NAVAL SURFACE WARFARE CENTER CARDEROCK DIVISION
DEPARTMENT OF THE NAVY NAVAL SURFACE WARFARE CENTER CARDEROCK DIVISION NAVAL SHIP SYSTEMS ENGINEERING STATION PHILADELPHIA, PA 19112-5083 9504 Ser 9542/11 30 May 1997 From: Commander, Carderock Division,
More informationHP 8509B Lightwave Polarization Analyzer. Product Overview. Optical polarization measurements of signal and components nm to 1600 nm
HP 8509B Lightwave Polarization Analyzer Product Overview polarization measurements of signal and components 1200 nm to 1600 nm 2 The HP 8509B Lightwave Polarization Analyzer The HP 8509B lightwave polarization
More informationPRO BEAM Series PRO BEAM expanded beam field deployable interconnect F739
PRO BEAM Series PRO BEAM expanded beam field deployable interconnect F739 12 PRO BEAM is a registered trade mark of TE Connectivity 12-2 CONTENTS Pages PRO BEAM Introduction... 12-4 Benefits of the expanded
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More informationPhotonic Signals. and Systems. An Introduction. NabeelA.Riza/Ph.D. Department of Electrical and Electronic Engineering University College Cork
Photonic Signals and Systems An Introduction NabeelA.Riza/Ph.D. Department of Electrical and Electronic Engineering University College Cork Cork, Ireland New York Chicago San Francisco Lisbon London Madrid
More informationOutdoor, CCTV or CCTV, Fig 8 Armored.
Outdoor, CCTV or CCTV, Fig 8 Armored. Outdoor stranded Fig 8 Armored, Fiber optic cable for aerial installation. It support application such as IEEE802.3, 10G Ethernet, Gigabit Ethernet, Fast Ethernet,
More informationNetwork Challenges for Coherent Systems. Mike Harrop Technical Sales Engineering, EXFO
Network Challenges for Coherent Systems Mike Harrop Technical Sales Engineering, EXFO Agenda 1. 100G Transmission Technology 2. Non Linear effects 3. RAMAN Amplification 1. Optimsing gain 2. Keeping It
More informationOP710. Multichannel Optical Power Meter Instruction Manual. (Also supports the OP710-ANX)
Multichannel Optical Power Meter Instruction Manual (Also supports the OP710-ANX) www.optotest.com 1.805.987.1700 Contacting OptoTest Corporation 1.805.987.1700 (7:30 a.m. to 5 p.m. PST) www.optotest.com
More informationMeasuring Photonic, Optoelectronic and Electro optic S parameters using an advanced photonic module
Measuring Photonic, Optoelectronic and Electro optic S parameters using an advanced photonic module APPLICATION NOTE This application note describes the procedure for electro-optic measurements of both
More informationAnnex 3. GSTP activity. Draft Generic Specification for Single Mode Simplex Optical Fibre Cable Assemblies. To Statement of work TEC-QTC/2009SoW04/SH
Reference TEC-QTC/2009SoW04/SH Issue 1, Revision 2, 14 August 2009 GSTP activity Annex 3 To Statement of work TEC-QTC/2009SoW04/SH Draft Generic Specification for Single Mode Simplex Optical Fibre Cable
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationRG142-TNMNM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR. Regulatory Compliance/Certifications
RG142-TNMNM-3M Product Classification Product Series Product Type RG142 CNT Jumper with interface types and, 3 m RG142 Braided cable assembly General Specifications Body Style, Connector A Body Style,
More informationCONTENTS. Introduction Characteristics Product range Pages
OSIS tm Series OSIS CONTENTS OSIS TM Pages Introduction...10-4 Characteristics...10-5 Product range...10-6 OSIS TM plug kit...10-6 OSIS TM receptacle...10-7 OSIS TM pre-mounted optical cable assemblies...10-8
More informationProduct Specification 40GE SWDM4 QSFP+ Optical Transceiver Module FTL4S1QE1C
1 Product Specification 40GE SWDM4 QSFP+ Optical Transceiver Module FTL4S1QE1C 9BPRODUCT FEATURES Hot-pluggable QSFP+ form factor 240m operation over duplex OM3 MMF (350m over OM4, 440m over OM5) Supports
More informationProduct Specification 100GBASE-SR10 100m CXP Optical Transceiver Module FTLD10CE1C APPLICATIONS
Product Specification 100GBASE-SR10 100m CXP Optical Transceiver Module FTLD10CE1C PRODUCT FEATURES 12-channel full-duplex transceiver module Hot Pluggable CXP form factor Maximum link length of 100m on
More informationOutdoor, Fig 8 Armored, Multi Tube
Outdoor, Fig 8 Armored, Multi Tube Outdoor stranded Fig 8 Armored, Fiber optic cable for aerial installation. It support application such as IEEE802.3, 10G Ethernet, Gigabit Ethernet, Fast Ethernet, Ethernet,
More informationProduct Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR
Product Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR PRODUCT FEATURES Up to OC-12/STM-4 bi-directional data links Standard 2x5 pin SFF footprint (MSA compliant)
More informationC400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications
C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications
More informationGM8036 LASER ANALYZER SWEEP SPECTRUM OPTICAL. Technical Specifications v1.01 March, 2011
GM8036 LASER SWEEP OPTICAL SPECTRUM ANALYZER (1525 ~ 1610 nm) Technical Specifications v1.01 March, 2011 GM8036 LASER SWEEP OPTICAL SPECTRUM ANALYZER (1525 ~ 1610 nm) UC INSTRUMENTS GM8036 laser sweep
More informationFTLD12CL3C. Product Specification 150 Gb/s (12x 12.5Gb/s) CXP Optical Transceiver Module PRODUCT FEATURES
Product Specification 150 Gb/s (12x 12.5Gb/s) CXP Optical Transceiver Module FTLD12CL3C PRODUCT FEATURES 12-channel full-duplex transceiver module Hot Pluggable CXP form factor Maximum link length of 100m
More informationInstallation Guide. English. FS62 Embedded Strain Sensor
Installation Guide English FS62 Embedded Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More informationC400-NMTM-1M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C400-NMTM-1M Product Classification Brand Product Series Product Type CNT-400 CNT Jumper with interface types N Male and TNC Male, 1m CNT CNT-400 Braided cable assembly General Specifications Body Style,
More informationFixed Attenuators. Features and Benefits. Standards
Features and Benefits Standard Fixed Attenuation Values of db up to 30 db Precision Polishing for Reduced Back Reflection Available in a Variety of Connector Types Polarization Insensitive Standards RoHS
More informationM-FP ISOLATOR PIGTAILS
M-FP ISOLATOR PIGTAILS Ultra high isolation Minimum polarization dependent loss (PDL) Optical path epoxy free Low insertion loss Environmentally stable Optical amplification Optical transmission CATV High-bit
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationWL Photonics Inc. Leading Provider of Fiber Optic Wavelength Tuning and Conditioning Solutions
Bandpass Tunable Filter WLTF-BM- & WLTF-BE- Short & Long Bandpass Tunable Filters of WLTF-BM- & WLTF-BE- series are built based on free-space optical Fourier transformation combing with diffraction grating
More informationINSTALLATION MANUAL Multi-Function Digital Bus Reader Model IND-5000, P/N (XX) TACAN, Distance & Bearing June 1997
INSTALLATION MANUAL Multi-Function Digital Bus Reader Model IND-5000, P/N 50-5021-(XX) TACAN, Distance & Bearing June 1997 Skylight Avionics 38629 6th Str. East Palmdale, CA. 93550 (661) 265-0497 INDEX
More informationProduct Specification. RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL
Product Specification RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.83 to 10.5Gb/s bit rates Power dissipation
More informationElements of Optical Networking
Bruckner Elements of Optical Networking Basics and practice of optical data communication With 217 Figures, 13 Tables and 93 Exercises Translated by Patricia Joliet VIEWEG+ TEUBNER VII Content Preface
More informationPRODUCT SPECIFICATION. This specification defines the performance, test, quality and reliability requirements of the PwrBlade ULTRA product.
1 of 10 B 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the PwrBlade ULTRA product. 2.0 Scope This specification is applicable to the termination
More informationHigh-Speed Circuit Board Signal Integrity
High-Speed Circuit Board Signal Integrity For a listing of recent titles in the Artech House Microwave Library, turn to the back of this book. High-Speed Circuit Board Signal Integrity Stephen C. Thierauf
More informationOP735. Benchtop Optical Power Meter Instruction Manual
Benchtop Optical Power Meter Instruction Manual www.optotest.com 1.805.987.1700 Contacting OptoTest Corporation 1.805.987.1700 (7:30 a.m. to 5 p.m. PST) www.optotest.com engineering@optotest.com OptoTest
More informationLASER DIODE SOURCE FIBER OPTIC (SINGLE OR MULTI-WAVELENGTH)
LASER DIODE SOURCE FIBER OPTIC (SINGLE OR MULTI-WAVELENGTH) Features: Single or multi-wavelength sources available Continuous wave (CW) and waveform modulation Wide range of connector receptacles available
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationL4 and L4i 915/940 nm Fiber- Coupled Lasers
L4 and L4i 915/940 nm Fiber- Coupled Lasers wwwlumentumcom Data Sheet Lumentum L4-series diode lasers offer up to 10 W of power from a 105 μm fiber The L4 is a revolutionary platform based on a long history
More informationAgilent 81980A, 81960A, 81940A, 81989A, 81949A, and 81950A Compact Tunable Laser Sources
Agilent 81980A, 81960A, 81940A, 81989A, 81949A, and 81950A Compact Tunable Laser Sources Data Sheet Introduction The Agilent 819xxA Series of compact tunable lasers enables optical device characterization
More informationPreliminary Product Specification Quadwire 40 Gb/s Parallel Breakout Active Optical Cable FCBN510QE2Cxx APPLICATIONS
Preliminary Product Specification Quadwire 40 Gb/s Parallel Breakout Active Optical Cable FCBN510QE2Cxx PRODUCT FEATURES Four-channel full-duplex active optical cable with breakout from QSFP+ to four SFP+
More informationProduct Specification 10km Multirate QSFP+ Optical Transceiver Module FTL4C1QM1C
Product Specification 10km Multirate QSFP+ Optical Transceiver Module FTL4C1QM1C PRODUCT FEATURES Hot-pluggable QSFP+ form factor Supports 39.8 Gb/s to 44.6 Gb/s aggregate bit rates Power dissipation
More informationVariable Optical Delay Line
Variable Optical Delay Line w w w. k y l i a. c o m i n f o @ k y l i a. c o m VODL 1 Description The Variable Optical Delay Line (VODL) is a device that enables a very precise and stable control of an
More informationWOORIRO 5% TAP-PD MODULE
Wooriro IOPMS Series WOORIRO 5% TAP-PD MODULE SPECIFICATIONS[Integration] Contents General Description... 3 Absolute Maximum Ratings... 3 Electro-Optical Characteristics... 4 Mechanical Dimension & Pin
More informationPSW-002. Fiber Optic Polarization Switch. User Guide
PSW-002 Fiber Optic Polarization Switch User Guide Version: 1.0 Date: May 30, 2014 General Photonics, Incorporated is located in Chino California. For more information visit the company's website at: www.generalphotonics.com
More information