APPLICATION FOR OSHPD SPECIAL SEISMIC CERTIFICATION PREAPPROVAL (OSP)

Transcription

1 OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT FACILITIES DEVELOPMENT DIVISION APPLICATION FOR OSHPD SPECIAL SEISMIC CERTIFICATION PREAPPROVAL (OSP) OFFICE USE ONLY APPLICATION #: OSP OSHPD Special Seismic Certification Preapproval (OSP) Type: New Renewal Manufacturer Information Manufacturer: Crucial Power Products Manufacturer s Technical Representative: Sherri Shahsavari Mailing Address: 000 S Broadway, Los Angeles, CA 9006 Telephone: x sherris@onlinepower.com Product Information Product Name: Wave Rider / Wave Rider Product Type: Emergency Lighting Inverter Product Model Number: See Attachment (List all unique product identification numbers and/or part numbers) General Description: Single phase or three phase emergency lighting inverter with battery backup inside of a carbon steel electrical cabinet enclosure. Seismic enhancements made to the test units required to address the anomalies observed during the tests shall be incorporated into the production units. Mounting Description: Base mounted rigid. Applicant Information Applicant Company Name: TRU Compliance, LLC Contact Person: Derrick Watkins, Ph.D., S.E. Mailing Address: 960 SW Disk Drive, Suite 0, Bend, OR 9770 Telephone: dwatkins@trucompliance.com I hereby agree to reimburse the Office of Statewide Health Planning and Development review fees in accordance with the California Administrative Code, 06. Signature of Applicant: Date: //07 Title: Executive Vice President Company Name: TRU Compliance, LLC Access to Safe, Quality Healthcare Environments that Meet California s Diverse and Dynamic Needs STATE OF CALIFORNIA HEALTH AND HUMAN SERVICES AGENCY 0//07 OSP Page of 7

2 OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT FACILITIES DEVELOPMENT DIVISION OSH-FD-759 (REV /6/5) Page of California Licensed Structural Engineer Responsible for the Engineering and Test Report(s) Company Name: TRU Compliance, LLC Name: Derrick Watkins, Ph.D., S.E. California License Number: S557 Mailing Address: 960 SW Disk Dr., Suite 0, Bend, OR 9770 Telephone: Supports and Attachments Preapproval Supports and attachments are preapproved under OPM- (Separate application for OSHPD Preapproval of Manufacturer s Certification (OPM) of Supports and attachments is required) Supports and attachments are not preapproved Certification Method Testing in accordance with: Other (Please Specify): ICC-ES AC56 Testing Laboratory Company Name: Contact Name: Pacific Earthquake Engineering Research Center (PEER) Nathaniel Knight Mailing Address: 0 South 6th Street, Bldg. 0, Richmond, CA 980 Telephone: (50) peer_center@berkeley.edu Access to Safe, Quality Healthcare Environments that Meet California s Diverse and Dynamic Needs STATE OF CALIFORNIA HEALTH AND HUMAN SERVICES AGENCY 0//07 OSP Page of 7

3 OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT FACILITIES DEVELOPMENT DIVISION OSH-FD-759 (REV /6/5) Page of Seismic Parameters Design in accordance with ASCE 7-0 Chapter : Yes No Design Basis of Equipment or Components (Fp/Wp) =. for SDS z/h =.0;.5 for SDS z/h = 0.0 SDS (Design spectral response acceleration at short period, g) =.0 for z/h =.0;.0 for z/h = 0.0 ap (In-structure equipment or component amplification factor) =.0 Rp (Equipment or component response modification factor) =.5 Ω0 (System overstrength factor) =.0 Ip (Importance factor) =.5 z/h (Height factor ratio) =.0 for SDS =.0g; 0.0 for SDS =.0g Equipment or Component Natural Frequencies (Hz) = See Attachment Overall dimensions and weight (or range thereof) = See Attachment Equipment or grade designed in accordance with ASCE 7-0 Chapter 5: Yes No Design Basis of Equipment or Components (V/W) = SDS (Design spectral response acceleration at short period, g) = SD (Design spectral response acceleration at second period, g) = R (Response modification coefficient ) = Ω0 (System overstrength factor) = Cd (Deflection amplification factor) = Ip (Importance factor) =.5 Height to Center of Gravity above base = Equipment or Component Natural Frequencies (Hz) = Overall dimensions and weight (or range thereof) = Tank(s) designed in accordance with ASME BPVC, 05: Yes No List of Attachments Supporting Special Seismic Certification Test Report(s) Drawings Calculations Manufacturer s Catalog Other(s) (Please Specify): Attachment OSHPD Approval (For Office Use Only) Approval Expires on December, 0 Signature: Date: //7 Print Name: M. R. Karim Title: SHFR Special Seismic Certification Valid Up to : SDS (g) = See Above z/h = See Above Condition of Approval (if applicable): Access to Safe, Quality Healthcare Environments that Meet California s Diverse and Dynamic Needs 0//07 OSP Page of 7

4 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input/Output voltage: 0-80VAC. Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 Model Line Wave Rider Cabinet Type A Model SV-WR.0A000N SV-WR.0A5800T SV-WR.0B00N SV-WR.0B5800T SV-WR.0D000N SV-WR.0D5800T SV-WR.0R500N SV-WR.0R5800T SV-WR.0H00T SV-WR.0H500T SV-WR.0H5800T SV-WR.0R00T SV-WR5.0A000N SV-WR5.0A5800T SV-WR5.0B00N SV-WR5.0B5800T SV-WR5.0D000N SV-WR5.0D5800T SV-WR5.0R500N SV-WR5.0R5800T SV-WR5.0H00T SV-WR5.0H500T SV-WR5.0H5800T SV-WR5.0R00T Dimensions (in) Depth Width Height S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 Weight (lb) Notes I P =.5 UUT ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap ,8 extrap. 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

5 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input/Output voltage: 0-80VAC. Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 Model Line Wave Rider Cabinet Type A Model SV-WR6.0A000N SV-WR6.0A5800T SV-WR6.0B00N SV-WR6.0B5800T SV-WR6.0D000N SV-WR6.0D5800T SV-WR6.0R500N SV-WR6.0R5800T SV-WR6.0H00T SV-WR6.0H500T SV-WR6.0H5800T SV-WR6.0R00T SV-WR7.5A000T SV-WR7.5A5800T SV-WR7.5B00N SV-WR7.5B5800T SV-WR7.5D000N SV-WR7.5D5800T SV-WR7.5R500N SV-WR7.5R5800T SV-WR7.5H00T SV-WR7.5H500T SV-WR7.5H5800T SV-WR7.5R00T Dimensions (in) Depth Width Height S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 Weight (lb) Notes I P =.5 UUT ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap ,0 extrap. 8.TRU.000 info@trucompliance.com 0//07 OSP Page 5 of 7

6 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input/Output voltage: 0-80VAC. Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 I P =.5 Model Line Model Dimensions (in) Depth Width Height Weight (lb) Notes UUT Wave Rider Cabinet Type A Wave Rider Cabinet Type B SV-WR8.0A000T SV-WR8.0A5800T SV-WR8.0B00N SV-WR8.0B5800T SV-WR8.0D000N SV-WR8.0D5800T SV-WR8.0R500N SV-WR8.0R5800T SV-WR8.0H00T SV-WR8.0H500T SV-WR8.0H5800T SV-WR8.0R00T SV-WR00A000T SV-WR00A5800T SV-WR00B00N SV-WR00B5800T SV-WR00D000N SV-WR00D5800T SV-WR00R500N SV-WR00R5800T SV-WR00H00T SV-WR00H500T SV-WR00H5800T SV-WR00R00T ,795 UUT: 0V in, 0V out , , , , , , , , , , , , , , , , , , , , , , ,8 8.TRU.000 info@trucompliance.com 0//07 OSP Page 6 of 7

7 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input/Output voltage: 0-80VAC. Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 Model Line Wave Rider Cabinet Type B Model SV-WR0A00T SV-WR0A5800T SV-WR0B00N SV-WR0B5800T SV-WR0D000N SV-WR0D5800T SV-WR0R500N SV-WR0R800T SV-WR0H00T SV-WR0H500T SV-WR0H5800T SV-WR0R00T SV-PW05A000T SV-WR05A5800T SV-WR05B00N SV-WR05B5800T SV-WR05D000N SV-WR05D5800T SV-WR05R500N SV-WR05R5800T SV-WR05H00T SV-WR05H500T SV-WR05H5800T SV-WR05R00T Dimensions (in) Depth Width Height S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 Weight (lb) Notes I P =.5 UUT , , , , , , , , , , , , , , , , , , , , , , , ,85 8.TRU.000 info@trucompliance.com 0//07 OSP Page 7 of 7

8 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input/Output voltage: 0-80VAC. Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 Model Line Wave Rider Cabinet Type B Model SV-PW07A000T SV-WR07A5800T SV-WR07B00N SV-WR07B5800T SV-WR07D000N SV-WR07D5800T SV-WR07R500N SV-WR07R5800T SV-WR07H00T SV-WR07H500T SV-WR07H5800T SV-WR07R00T Dimensions (in) Depth Width Height S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 Weight (lb) Notes I P =.5 UUT , , , , , , , , , , , ,5 UUT: 77V in, 80V out 8.TRU.000 info@trucompliance.com 0//07 OSP Page 8 of 7

9 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input: 08Y/0V ~ 80Y/77 Output: 08Y/0V ~ 80Y/77 Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 Model Line Model SV-WR00B05LHT-VA SV-WR00B09LHT-VA SV-WR00H09LHT-VA SV-WR00H05LHT-VA SV-WR05B05LHT-VA SV-WR05B09LHT-VA SV-WR05H09LHT-VA SV-WR05H05LHT-VA SV-WR00B05LHT-VA SV-WR00B09LHT-VA SV-WR00H09LHT-VA SV-WR00H05LHT-VA Wave Rider SV-WR05B05LHT-VA SV-WR05B09LHT-VA SV-WR05H09LHT-VA SV-WR05H05LHT-VA SV-WR00B05LHT-VA SV-WR00B09LHT-VA SV-WR00H09LHT-VA SV-WR00H05LHT-VA SV-WR00B05LHT-VA SV-WR00B09LHT-VA SV-WR00H09LHT-VA SV-WR00H05LHT-VA Dimensions (in) Depth Width Height S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 Weight (lb) Notes I P = ,08 08Y/0V in, 08Y/0V out UUT , , , , , , , , , , , , , , , , , , , , , , ,066 8.TRU.000 info@trucompliance.com 0//07 OSP Page 9 of 7

10 CERTIFIED COMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider Certified Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. TABLE Certified Options Summary: Input: 08Y/0V ~ 80Y/77 Output: 08Y/0V ~ 80Y/77 Mounting Configuration: Base mounted - rigid Note: Installed mounting configuration must be of similar configuration and equivalent strength and stiffness to those tested. Building Code: CBC 06 S DS =.0 z/h=.0 S DS =.0 z/h = 0.0 I P =.5 Model Line Model Dimensions (in) Depth Width Height Weight (lb) Notes UUT Wave Rider Battery Cabinet SV-WR050B05LHT-VA ,6 SV-WR050B09LHT-VA ,6 SV-WR050H09LHT-VA ,6 SV-WR050H05LHT-VA ,6 SV-WR050B05LHT-KW ,565 SV-WR050B09LHT-KW ,565 SV-WR050H09LHT-KW ,565 80Y/77V in, 80Y/77V out SV-WR050H05LHT-KW ,565 9 Inch ,75 UUT enclosure w/batteries 5 Inch ,0 5 8.TRU.000 info@trucompliance.com 0//07 OSP Page 0 of 7

11 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Table Description: Batteries Model Line: Wave Rider & Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 TABLE Component Type Manufacturer Model Description Notes UUT Battery Exide Technologies Vision Group Power-Sonic Co. SV85F SV00F SV70NGF MV80FT UNA-70 UNA-0 PHR-50 MK (Unigy) HR7500ET V, 750 WPC, lead acid CSB Battery/Hitachi Chemical Company SV550NGF MV05FT MV55FT HRL0WFR HRL50WFR V, 85-70WPC, lead acid V, 06-90WPC, lead acid V, 7-5WPC, lead acid V, 550-5WPC, lead acid V, 00Ah, lead acid V, 50Ah, lead acid V, 75Ah, lead acid V, 95 Ah, lead acid V, 06 Ah, lead acid V, 95 Ah, lead acid V, 0V, lead acid V, 50W, lead acid TRU.000 info@trucompliance.com 0//07 OSP Page of 7

12 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider & Table Description: Transformers TABLE Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 Component Type Manufacturer Model Description Notes UUT VA, Cu windings, 0-77V in, 0V out extrap VA, Cu windings, 08-77V in, 0V out extrap VA, Cu windings, 08-80V in, 0V out extrap VA, Cu windings, 0-77V in, 0V out 00-0VA, Cu windings, 08-80V in, 0V out kVA, Cu windings, 0-77V in, 0-77V out kVA, Cu windings, 08-77V in, 08-77V out kVA, Cu windings, 80V in, 0-77V out kVA, Cu windings, 0-77V in, 0-77V out kVA, Cu windings, 0-77V in, 0-77V out kVA, Cu windings, 0V in, 0V out Transformer OnLine Power Inc kVA, Cu windings, 58V in, 0V out kVA, Cu windings, 58V in, 77V out kVA, Cu windings, 08-77V in, 08-77V out kVA, Cu windings, 80V in, 0-77V out kVA, Cu windings, 08-77V in, 08-77V out kVA, Cu windings, 0-77V in, 0-77V out kVA, Cu windings, 0V in, 0V out kVA, Cu windings, 58V in, 0V out kVA, Cu windings, 58V in, 77V out kVA, Cu windings, 08-77V in, 08-77V out kVA, Cu windings, 80V in, 0-77V out kva, Cu windings, 0V in, 7-0V out 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

13 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider & Table Description: Transformers TABLE Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 Component Type Manufacturer Model Description Notes UUT kva, Cu windings, 0V in, 77-0V out kva, Cu windings, 77V in, 0-0V out kva, Cu windings, 77V in, 0-0V out kva, Cu windings, 77V in, 7-0V out kVA, Cu windings, V in, 0V out kVA, Cu windings, V in, 77V out kVA, Cu windings, V in, 0V out kVA, Cu windings, V in, 77V out kVA, Cu windings, 0V in, 7-00V out kVA, Cu windings, 0V in, 77-00V out kVA, Cu windings, 77V in, 0-00V out Transformer OnLine Power Inc kVA, Cu windings, 77V in, 0-00V out kVA, Cu windings, 77V in, 7-00V out kVA, Cu windings, 96V in, 0V out kVA, Cu windings, 96V in, 77V out kVA, Cu windings, 0V in, 77-5V out kVA, Cu windings, 0V in, 07-5V out kVA, Cu windings, 77V in, 0-5V out kVA, Cu windings, 77V in, 0-5V out kVA, Cu windings, 77V in, 07-5V out kVA, Cu windings, 0V in, 07-5V out kVA, Cu windings, 77V in, 0-5V out kVA, Cu windings, 77V in, 0-5V out 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

14 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider & Table Description: Transformers TABLE Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 Component Type Manufacturer Model Description Notes UUT Transformer OnLine Power Inc kVA, Cu windings, 77V in, 07-5V out kVA, Cu windings, 96V in, 0V out kVA, Cu windings, 96V in, 77V out 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

15 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider & Table Description: Circuit Breakers TABLE 5 Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 Component Type Manufacturer Model Description Notes UUT ED5L P, 5A ED50L P, 50A ED75L P, 75A Cutler Hammer (ED) ED00L P, 00A ED5L P, 5A ED50L P, 50A ED75L P, 75A QC00 P, 0A QC050 P, 50A QC00 P, 00A QC05H P, 5A Circuit Breaker QC00H P, 0A QC05H P, 5A QC00H P, 0A Cutler Hammer (QC) QC00H QC050H P, 0A P, 50A QC060H P, 60A QC070 P, 70A QC080 P, 80A QC090 P, 90A QC00H P, 00A QC05H QC050H P, 5A P, 50A 8.TRU.000 info@trucompliance.com 0//07 OSP Page 5 of 7

16 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider & Table Description: Circuit Breakers TABLE 5 Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 Component Type Manufacturer Model Description Notes UUT QC070H P, 70A Cutler Hammer (QC) QC080H QC090H P, 80A P, 90A QC00H P, 00A GHC05 P, 5A GHC05 P, 5A GHC05 P, 5A GHC00 P, 0A GHC050 P, 50A GHC060 P, 60A Circuit Breaker Cutler Hammer (GHC) GHC080 GHC00 P, 80A P, 00A GHC00 P, 0A GHC00 P, 0A GHC00 P, 0A GHC060 P, 60A GHC080 P, 80A GHC00 P, 00A EGE00FFG P, 0A Cutler Hammer (EGE) EGE00FFG EGE00FFG EGE050FFG EGE070FFG P, 0A P, 0A P, 50A P, 70A 8.TRU.000 info@trucompliance.com 0//07 OSP Page 6 of 7

17 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Model Line: Wave Rider & Table Description: Circuit Breakers TABLE 5 Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 Component Type Manufacturer Model Description Notes UUT Cutler Hammer (EGE) EGE080FFG EGE00FFG P, 80A P, 00A TSN060TW- P, 60A TSN090TW- P, 90A TSN00TW- P, 00A 5 TSN5TW- P, 5A TSN50TW- P, 50A TN00TW P, 00A S0-C0 P, 0A Circuit Breaker ABB S0-D0 S0-B0 TS05TW P, 0A P, 0A P, 5A TS05TW P, 5A TS00TW P, 0A TS00TW P, 0A TS050TW P, 50A TS060TW P, 60A TS070TW P, 70A TS080TW P, 80A TS090TW P, 90A 8.TRU.000 info@trucompliance.com 0//07 OSP Page 7 of 7

18 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Table Description: Miscellaneous Model Line: Wave Rider & Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 TABLE 6 Component Type Manufacturer Model Description Notes UUT Heat Sink Contactor Wakefield Extrusion #50M AAVID Newark Electronic 657-5ABP T5 Aluminum extrusion alloy 056 Augmented bonded fin C5DNF0A P, 0A Cutler Hammer C5FNF60A P, 60A C5FNF75A P, 75A XTCE5HA P, 5A GE CR5GJAA P, 0A CR5GKAA P, 50A ABB A P, 90A GIGAVAC GXKA 50A, 750VDC, extrap. extrap., 8.TRU.000 info@trucompliance.com 0//07 OSP Page 8 of 7

19 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Table Description: Miscellaneous Model Line: Wave Rider & Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 TABLE 6 Component Type Manufacturer Model Description Notes UUT PH, -5kW, 0kW & PH, 0kW-5kW ( Ω Resistor) PH, 7.5,.5, 5, 7kW & PH, 0 kva-5kva ( Ω Resistor) PCBD OnLine Power Inc PH, 0kVA (6.8 Ω, /w Resistor), 50A CT XX XX PH & PH, SCR Driver PDBD 65-9-XX PH, Control PCBD, 0kVA with LCD Identical to ' (software) XX 65--XX Base Board ( Phase Control Board) PH, 50kVA & 50 kw, 50A CT XX XX 65--XX XX PH, 0kVA Base Board (, Phase Power Board) Base Board (SCR Drive Board) PH, Control PCBD, 0-0kVA with LCD Identical to ' (software) PH, Control PCBD, 50kVA/50kW with LCD Base Board ( Phase Power Board) PH, DC to DC converter, 50kVA/50kW PH & PH, Alarm, Dirstribution PCBD PH Control PCBD (Event Logging) PH, Control PCBD (Event Logging) Identical to '-87-0 (software) PH, -0kW Identical to ' (software) PH,.5kW, 7kW Base Board (Standard Control Board) PH, Control PCBD, 0-5kVA with LCD Identical to ' (software),,, 8.TRU.000 info@trucompliance.com 0//07 OSP Page 9 of 7

20 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Table Description: Miscellaneous Model Line: Wave Rider & Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 TABLE 6 Component Type Manufacturer Model Description Notes UUT 65-6-XX PH, Netagent Interface (Network Mgmt) XX PH, Metering Interface PCBD XX PH & PH, Slow Transfer PCBD PCBD OnLine Power Inc XX PH, Output Overload Sensing PCBD XX PH & PH, Fast Transfer Processor PCBD 65-6-XX PH & PH, Alarm Relay PCBD 65-5-XX PH, Audio Alarm PCBD Current Sensor LEM LA00-P 00A, Switch Control Switches International Inc. N6-US N5US076-0 A00US076-0 P, 55A, 600V P, 5A, 600V P, 75A, 600V Int. Rectifier IRKD9/ 9A, Rectifier Diode Semikron Powerex SKKD 00/6 G6 CD699B CD699C 9A 9A, 800V,,, Multicom MCCM508-RH 5A, 800VDC, Diode Bridge Collmer Semiconductor KBPC5-0 5AMP, 00VDC, General Semiconductor GBPC5-0 5AMP, 00VDC, SCR LCD Display Semikron OPTREX SKKT 9/E SKKT /E C-587NFJ-SLW-AEN 95A A.5-5.5V, 98.5mm x 6mm x 5.6mm 8.TRU.000 info@trucompliance.com 0//07 OSP Page 0 of 7

21 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Table Description: Miscellaneous Model Line: Wave Rider & Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 TABLE 6 Component Type Manufacturer Model Description Notes UUT LCD Display Panasonic AIG05GQ0D VDC,.6W, 7mm x 8.mm A, 00uH, 0-77VAC A, 00uH, 0-77VAC A, 00uH, 0-77VAC Inductor OnLine Power Inc A, 00uH, 0-77VAC A, 500uH, 80-0VDC A, 50uH, 80-0VDC A, 50uH, 80-0VDC A, 500uH, -5Hz, 5A 606R0AT 60mFD, 0VAC, 60Hz Capacitor FJ Enterprise 06R660AT 0mFD, 600VAC, 60Hz 56R70AT 5mFD, 70VAC, 60Hz, MPDB65 600V, 75A MPDB69 600V, 5A MPDB V, 5A Mersen MPDB V, 0A Terminal Block MPDB V, 0A MPDB V, 50A MPDB67 600V, 0A Weidmuller WDU5 WPE5 690V, 09A Ground, - AWG IGBT Fuji MBI50TA-060 MBI00TE A, 600V 00A, 600V 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

22 CERTIFIED SUBCOMPONENT MATRIX Manufacturer: Crucial Power Products Table Description: Miscellaneous Model Line: Wave Rider & Building Code: CBC 06 S DS =.0 z/h =.0 S DS =.0 z/h = 0.0 I P =.5 TABLE 6 Component Type Manufacturer Model Description Notes UUT IGBT Power Supply Fan Fuji Semikron TDK-Lambda Mechatronics MBI00TE A, 600V SKM00GB 00A, 00V ZPT05N +5V, +V, -V UF5KCBTH 5VAC, 8W, 60Hz - ST08PYG 0/08VAC, -phase wye TVSS Mersen ST80PYG STP0PGM 77/80VAC, -phase wye 0V STP77PGM 77V STP0SPGM 08/0V RM & UPS Management Sys MEGATEC BT505 DP5 Netagent II, ports Netagent Mini 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

23 UNIT UNDER TEST (UUT) SUMMARY SHEET Manufacturer: Crucial Power Products Model Line: Wave Rider & Model Number: SV-PW8.0A000T Serial Number: N/A Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. Cabinet type A. UUT Options/Subcomponent Summary: Lead Acid batteries: V 95 Ah; V 0W Breakers: Cutler Hammer: (ED) 5 & 00A; (QC) 0, 50, & 00A; (GHC) 5 & 5A ABB: TS 60A Weight (lb) 795 Building Code CBC 06 Test Mounting Details: Dimension (in) UUT Highest Passed Seismic Run Information Test Criteria ICC-ES AC56 UUT Properties S DS z/h I P A FLX-H A RIG-H A FLX-V A RIG-V Lowest Natural Frequency (Hz) Depth Width Height Front-Back Side-Side Vertical The UUT was rigid base mounted to the table using (6) 5/8" Grade 8 bolts. Unit maintained structural integrity and remained functional per manufacturer requirement after shake table test. Contents were included in testing per operating conditions. 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

24 UNIT UNDER TEST (UUT) SUMMARY SHEET Manufacturer: Crucial Power Products Model Line: Wave Rider & Model Number: SV-PW07R00T Serial Number: N/A Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. Cabinet type B UUT Options/Subcomponent Summary: Lead Acid batteries: V, 85-70WPC; V, 06 Ah Transformers: 00VA, Cu windings, 0-77V in, 0V out; 0kVA, Cu windings, 08-77V in, 08-77V out; 0kVA, Cu windings, 80V in, 0/77V out Breakers: Cutler Hammer: (GHC) 00A ABB: 5 & 00A Weight (lb) 5 Building Code CBC 06 Test Mounting Details: Dimension (in) UUT Highest Passed Seismic Run Information Test Criteria ICC-ES AC56 UUT Properties S DS z/h I P A FLX-H A RIG-H A FLX-V A RIG-V Lowest Natural Frequency (Hz) Depth Width Height Front-Back Side-Side Vertical The UUT was rigid base mounted to the table using () 5/8" Grade 8 bolts. Unit maintained structural integrity and remained functional per manufacturer requirement after shake table test. Contents were included in testing per operating conditions. 8.TRU.000 info@trucompliance.com 0//07 OSP Page of 7

25 UNIT UNDER TEST (UUT) SUMMARY SHEET Manufacturer: Crucial Power Products Model Line: Wave Rider & Model Number: SV-PW00B05LHT-VA Serial Number: N/A Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. UUT Options/Subcomponent Summary: Transformers: 0VA, Cu windings, 08-80V in, 0V out; 5kVA, Cu windings, 58V in, 0V out; kva, Cu windings, 0V in, 7-0V out Breakers: Cutler Hammer: (QC) 5 & 00A; (GHC) 0 & 00A ABB: 90A Weight (lb) 08 Building Code CBC 06 Test Mounting Details: Dimension (in) UUT Highest Passed Seismic Run Information Test Criteria ICC-ES AC56 UUT Properties S DS z/h I P A FLX-H A RIG-H A FLX-V A RIG-V Lowest Natural Frequency (Hz) Depth Width Height Front-Back Side-Side Vertical The UUT was rigid base mounted to the table using (6) 5/8" Grade 8 bolts. Unit maintained structural integrity and remained functional per manufacturer requirement after shake table test. Contents were included in testing per operating conditions. 8.TRU.000 info@trucompliance.com 0//07 OSP Page 5 of 7

26 UNIT UNDER TEST (UUT) SUMMARY SHEET Manufacturer: Crucial Power Products Model Line: Wave Rider & Model Number: SV-PW050H09LHT-KW Serial Number: N/A Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. UUT Options/Subcomponent Summary: Transformers: 70kVA, Cu windings, 77V in, 07-5V out; 70kVA, Cu windings, 96V in, 77V out; Breakers: Cutler Hammer: (ED) 75A; (GHC) 80A; (EGE) 0 & 00A ABB: 90 & 00A Weight (lb) 565 Building Code CBC 06 Test Mounting Details: Dimension (in) UUT Highest Passed Seismic Run Information Test Criteria ICC-ES AC56 UUT Properties S DS z/h I P A FLX-H A RIG-H A FLX-V A RIG-V Lowest Natural Frequency (Hz) Depth Width Height Front-Back Side-Side Vertical The UUT was rigid base mounted to the table using (6) 5/8" Grade 8 bolts. Unit maintained structural integrity and remained functional per manufacturer requirement after shake table test. Contents were included in testing per operating conditions. 8.TRU.000 info@trucompliance.com 0//07 OSP Page 6 of 7

27 UNIT UNDER TEST (UUT) SUMMARY SHEET Manufacturer: Crucial Power Products Model Line: Wave Rider & Model Number: 5 Inch Battery Cabinet Serial Number: N/A Product Construction Summary: Base & Top: GA. carbon steel, Back & Sides: GA. carbon steel, Doors: 6 GA. carbon steel. UUT 5 Options/Subcomponent Summary: Lead Acid batteries: V, 550-5WPC; V, 00Ah; V, 75Ah; V, 750 WPC; V, 50W Breakers: ABB: 00A Weight (lb) 0 Building Code CBC 06 Test Mounting Details: Dimension (in) UUT Highest Passed Seismic Run Information Test Criteria ICC-ES AC56 UUT Properties S DS z/h I P A FLX-H A RIG-H A FLX-V A RIG-V Lowest Natural Frequency (Hz) Depth Width Height Front-Back Side-Side Vertical The UUT was rigid base mounted to the table using () 5/8" Grade 8 bolts. Unit maintained structural integrity and remained functional per manufacturer requirement after shake table test. Contents were included in testing per operating conditions. 8.TRU.000 info@trucompliance.com 0//07 OSP Page 7 of 7