Interference Suppression Film Capacitor - Class Y2 Radial MKP 300 V AC - Line to Ground Application

Transcription

1 Interference Suppression Fim Capacitor - Cass Y2 Radia MKP 300 V AC - Line to Ground Appication FEATURES 7.5 mm to 27.5 mm ead pitch AEC-Q200 quaified Robust design Materia categorization: for definitions of compiance pease see APPLICATIONS Standard ine bypass (between ine and ground) Y2 appications Line bypass appication for continuous operation See aso appication note: QUICK REFERENCE DATA Capacitance range (E12 series) μf to 0.47 μf (preferred vaues acc. to E6) Capacitance toerance ± 20 %, ± 10 %, ± 5 % Rated AC votage 300 V AC ; 50 Hz to 60 Hz Permissibe DC votage V DC Cimatic testing cass acc. to IEC /105/56/C for product voumes 1 mm 3 55/105/56/B for voumes 1 mm 3 Maximum appication temperature 105 C IEC and EN Reference standards IEC requires pass. famm. cass B for voumes > 1 mm 3 UL ; ENEC; CSA E Dieectric Poypropyene fim Eectrodes Metaized fim Series construction Construction Tripe construction Encapsuation Pastic case, epoxy resin seaed, fame retardant cass UL 94 V-0 Leads Tinned wire Marking C-vaue; toerance; rated votage; sub-cass; manufacturer s type designation; code for dieectric materia; manufacturer ocation, year and week; manufacturer s ogo or name; safety approvas Note For more detaied data and test requirements, contact rfi@vishay.com DIMENSIONS w h t P Ø d t Revision: 01-Ju-14 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 COMPOSITION OF CATALOG NUMBER Y2 TYPE AND PITCHES 7.5 mm 10.0 mm 15.0 mm 22.5 mm 27.5 mm CAPACITANCE (numericay) MULTIPLIER (nf) BFC X XX X 2222 (*) 338 6X XX X (*) od ordering code Exampe: 104 = 10 x 10 = 100 nf (except specia numbers) TYPE PACKAGING STANDARD DIMENSIONS C-TOL. PREFERRED TYPES Y2 Loose in box Taped ammo Taped ree Loose in box Taped ammo Taped ree Lead ength 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead ength 3.5 mm ± 0.3 mm (pitch > 10 mm) Lead ength 5 mm ± 1 mm Lead ength 25 mm ± 2 mm Pitch 7.5 mm ony; H = 18.5 mm; P 0 = 12.7 mm Pitch 7.5 mm to 15 mm; H = 18.5 mm Lead ength 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead ength 3.5 mm ± 0.3 mm (pitch > 10 mm) Lead ength 5 mm ± 1 mm Lead ength 25 mm ± 2 mm Pitch 7.5 mm ony; H = 18.5 mm; P 0 = 12.7 mm Pitch 7.5 mm to 15 mm; H = 18.5 mm TYPE PACKAGING ALTERNATIVE PITCH SIZES AND TOLERANCES C-TOL. PREFERRED TYPES Packaging ike 20 % and aternative pitch sizes 5 % See tabes for detais Y2 Aternative pitch size 10 %/20 % 20 % 10 % BFC BFC BFC BFC BFC BFC BFC BFC BFC BFC Note (1) For detaied tape specification refer to Packaging Information SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC votage (U RAC ) 300 V Permissibe DC votage (U RDC ) V Tangent of oss ange at 1 khz at 10 khz C 470 nf 10 x x 10-4 Rated votage puse sope (du/dt) R at 420 V DC 100 V/μs R between eads, for C 0.33 μf at 100 V; 1 min > M RC between eads, for C > 0.33 μf at 100 V; 1 min > 5000 s R between eads and case; 100 V; 1 min > M Withstanding (DC) votage (cut off current 10 ma) (1) ; rise time V/s 3400 V; 1 min Withstanding (AC) votage between eads and case 2100 V; 1 min Maximum appication temperature 105 C Note (1) See Votage Proof Test for Metaized Fim Capacitors : Revision: 01-Ju-14 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 7.5 mm CATALOG NUMBER BFC X XXX AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS w x h x SHORT LEADS LONG LEADS (V) (μf) (g) (mm) (3) t = 3.5 mm + 1 mm/ t = 5.0 mm t = ± 1.0 mm H = 18.5 mm; 25.0 mm P mm ± 2.0 mm 0 = 12.7 mm 300 Notes = Standard Packing Quantity (1) H = In-tape height; P 0 = Sprocket hoe distance; for detaied specifications refer to packaging information: (2) Ree diameter = 365 mm is avaiabe on request (3) Weight for short ead product ony REEL Ø = 500 mm (1)(2) H = 18.5 mm; P 0 = 12.7 mm PITCH = 7.5 mm ± 0.4 mm; d t = 0.50 mm ± 0.05 mm; C-to. = ± 20 % (U RDC = V) x 9.0 x x 10.5 x x 11.5 x PITCH = 7.5 mm ± 0.4 mm; d t = 0.50 mm ± 0.05 mm; C-to. = ± 10 % (U RDC = V) x 9.0 x x 10.5 x x 11.5 x PITCH = 7.5 mm ± 0.4 mm; d t = 0.50 mm ± 0.05 mm; C-to. = ± 5 % (U RDC = V) x 9.0 x x 10.5 x x 11.5 x Revision: 01-Ju-14 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 10 mm CATALOG NUMBER BFC X XXX AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS w x h x SHORT LEADS LONG LEADS (V) (μf) (g) (mm) (3) t = 3.5 mm + 1 mm/ t = 5.0 mm t = ± 1.0 mm H = 18.5 mm; 25.0 mm P mm ± 2.0 mm 0 = 12.7 mm 300 Notes = Standard Packing Quantity (1) H = In-tape height; P 0 = Sprocket hoe distance; for detaied specifications refer to packaging information: (2) Ree diameter = 365 mm is avaiabe on request (3) Weight for short ead product ony REEL Ø = 500 mm (1)(2) H = 18.5 mm; P 0 = 12.7 mm PITCH = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-to. = ± 20 % (U RDC = V) x 10.0 x x 11.0 x x 12.0 x PITCH = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-to. = ± 10 % (U RDC = V) x 10.0 x x 11.0 x x 12.0 x PITCH = 10.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-to. = ± 5 % (U RDC = V) x 10.0 x x 11.0 x x 12.0 x Revision: 01-Ju-14 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 15 mm CATALOG NUMBER BFC X XXX AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS w x h x SHORT LEADS LONG LEADS (V) (μf) (g) (mm) (3) t = 3.5 mm t = 5.0 mm t = ± 0.3 mm ± 1.0 mm H = 18.5 mm; 25.0 mm P ± 2.0 mm 0 = 12.7 mm 300 Notes = Standard Packing Quantity (1) H = In-tape height; P 0 = Sprocket hoe distance; for detaied specifications refer to packaging information: (2) Ree diameter = 365 mm is avaiabe on request (3) Weight for short ead product ony REEL Ø = 500 mm (1)(2) H = 18.5 mm; P 0 = 12.7 mm PITCH = 15.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-to. = ± 20 % (U RDC = V) x 11.0 x x 12.0 x PITCH = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 20 % (U RDC = V) x 13.5 x x 15.0 x x 16.5 x PITCH = 15.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-to. = ± 10 % (U RDC = V) x 11.0 x x 12.0 x PITCH = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 10 % (U RDC = V) x 13.5 x x 15.0 x x 16.5 x PITCH = 15.0 mm ± 0.4 mm; d t = 0.60 mm ± 0.06 mm; C-to. = ± 5 % (U RDC = V) x 11.0 x x 12.0 x PITCH = 15.0 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 5 % (U RDC = V) x 13.5 x x 15.0 x x 16.5 x Revision: 01-Ju-14 5 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 22.5 mm CATALOG NUMBER BFC X XXX AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS w x h x SHORT LEADS LONG LEADS (V) (μf) (g) (mm) (3) t = 3.5 mm t = 5.0 mm t = ± 0.3 mm ± 1.0 mm H = 18.5 mm; 25.0 mm P ± 2.0 mm 0 = 12.7 mm 300 Notes = Standard Packing Quantity (1) H = In-tape height; P 0 = Sprocket hoe distance; for detaied specifications refer to packaging information: (2) Ree diameter = 365 mm is avaiabe on request (3) Weight for short ead product ony PITCH = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 20 % (U RDC = V) REEL Ø = 500 mm (1)(2) H = 18.5 mm; P 0 = 12.7 mm x 16.5 x x 18.0 x x 19.5 x x 22.0 x PITCH = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 10 % (U RDC = V) x 16.5 x x 18.0 x x 19.5 x x 22.0 x PITCH = 22.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 5 % (U RDC = V) x 16.5 x x 18.0 x x 19.5 x x 22.0 x Revision: 01-Ju-14 6 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 27.5 mm CATALOG NUMBER BFC X XXX AND PACKAGING LOOSE IN BOX DIMENSIONS AMMOPACK U RAC CAP. MASS w x h x SHORT LEADS LONG LEADS (V) (μf) (g) (mm) (3) t = 3.5 mm t = 5.0 mm t = ± 0.3 mm ± 1.0 mm H = 18.5 mm; 25.0 mm P ± 2.0 mm 0 = 12.7 mm 300 Notes = Standard Packing Quantity (1) H = In-tape height; P 0 = Sprocket hoe distance; for detaied specifications refer to packaging information: (2) Ree diameter = 365 mm is avaiabe on request (3) Weight for short ead product ony PITCH = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 20 % (U RDC = V) REEL Ø = 500 mm (1)(2) H = 18.5 mm; P 0 = 12.7 mm x 23.0 x x 25.0 x x 28.0 x x 31.0 x PITCH = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 10 % (U RDC = V) x 23.0 x x 25.0 x x 28.0 x x 31.0 x PITCH = 27.5 mm ± 0.4 mm; d t = 0.80 mm ± 0.08 mm; C-to. = ± 5 % (U RDC = V) x 23.0 x x 25.0 x x 28.0 x x 31.0 x APPROVALS SAFETY APPROVALS Y2 VOLTAGE VALUE FILE NUMBERS LINK EN (ENEC) (= IEC ed-3) 300 V AC 1 nf to 470 nf FI UL V AC 1 nf to 470 nf E CSA-E V AC 1 nf to 470 nf E CB-test certificate 300 V AC 1 nf to 470 nf FI The ENEC-approva together with the CB-certificate repace a nationa marks of the foowing countries (they have aready signed the ENEC-agreement): Austria; Begium; Czech. Repubic; Denmark; Finand; France; Germany; Greece; Hungary; Ireand; Itay; Luxembourg; Netherands; Norway; Portuga; Sovenian; Spain; Switzerand and United Kingdom. Revision: 01-Ju-14 7 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 MOUNTING Norma Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoiers are designed for mounting in printed circuit boards by means of automatic insertion machines. For detaied tape specifications refer to packaging information: Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches 15 mm capacitors sha be mechanicay fixed by the eads For arger pitches the capacitors sha be mounted in the same way and the body camped Space Requirements on Printed-Circuit Board The maximum space for ength (I max. ), width (w max. ), and height (h max. ) of fim capacitors to take in account on the printed-circuit board is shown in the drawings: For products with pitch 15 mm, w = = 0.3 mm; h = 0.1 mm For products with 15 mm < pitch, 27.5 mm, w = = 0.5 mm; h = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaer than or equa to the ead diameter of the product concerned. Eccentricity w max. = W + Δ I max. = I + Δ CBA116 h max. = h + Δ Seating pane SOLDERING CONDITIONS For genera sodering conditions and wave sodering profie, we refer to the appication note: Sodering Guideines for Fim Capacitors : Storage Temperature T stg = - 25 C to + 35 C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Uness otherwise specified, a eectrica vaues appy to an ambient temperature of 23 C ± 1 C, an atmospheric pressure of 86 kpa to 106 kpa and a reative humidity of 50 % ± 2 %. For reference testing, a conditioning period sha be appied over 96 h ± 4 h by heating the products in a circuating air oven at the rated temperature and a reative humidity not exceeding 20 %. Revision: 01-Ju-14 8 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 CHARACTERISTICS ΔC/C (%) typica max Dissipation factor (x 10-4 ) C > 220 nf 47 nf < C 220 nf 10 nf < C 47 nf C 10 nf min T amb ( C) Capacitance as a function of ambient temperature (typica curve) f (Hz) Tangent of oss ange as a function of frequency (typica curve) Impedance (Ω) nf 100 nf 470 nf 1 nf 4.7 nf 10 nf f (MHz) Y f (Hz) 10 8 Impedance as a function of frequency (typica curve) C (nf) Resonant frequency as a function of capacitance (typica curve) 10 3 AC votage (V) 10 3 AC current (ma) nf 100 nf 47 nf nf 4.7 nf 1 nf T amb 105 C T amb 105 C f (Hz) f (Hz) 10 5 Max. RMS votage as a function of frequency Max. RMS current as a function of frequency Revision: 01-Ju-14 9 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

10 10 6 RC (s) 10 5 APPLICATION NOTES Tamb ( C) Insuation resistance as a function of ambient temperature For Y2 eectromagnetic interference suppression in standard ine bypass appications (between ine and ground) (50 Hz/ 60 Hz) with a maximum mains votage of 300 V AC. For series impedance appications we refer to the appication note: For capacitors connected in parae, normay the proof votage and possiby the rated votage must be reduced. For information depending of the capacitance vaue and the number of parae connections contact rfi@vishay.com These capacitors are not intended for continuous puse appications. For these situations, capacitors of the AC and puse program must be used. The maximum ambient temperature must not exceed 105 C. Rated votage puse sope: if the puse votage is ower than the rated votage, the vaues of the specific reference data can be mutipied by 420 V DC and divided by the appied votage. INSPECTION REQUIREMENTS Genera Notes Sub-cause numbers of tests and performance requirements refer to the Sectiona Specification, Pubication IEC and Specific Reference Data. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detai) As specified in chapters Genera Data of this specification Initia measurements Capacitance Tangent of oss ange: at 10 khz 4.3 Robustness of terminations Tensie: Load 10 N; 10 s Bending: Load 5 N; 4 x 90 No visibe damage 4.4 Resistance to sodering heat No pre-drying Method: 1A Soder bath: 280 C ± 5 C Duration: 10 s Revision: 01-Ju Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

11 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C Component sovent resistance Isopropyacoho at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h Fina measurements Visua examination No visibe damage Legibe marking Capacitance C/C 5 % of the vaue measured initiay Tangent of oss ange Increase of tan Compared to vaues measured initiay SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initia measurements Insuation resistance Capacitance Tangent of oss ange: at 10 khz As specified in section Insuation Resistance of this specification 4.20 Sovent resistance of the marking: Isopropyacoho at room temperature Method: 1 Rubbing materia: Cotton woo Immersion time: 5 min ± 0.5 min No visibe damage Legibe marking 4.6 Rapid change of temperature A = - 55 C B = C 5 cyces Duration t = 30 min Inspection Visua examination No visibe damage 4.7 Vibration Mounting: See section Mounting of this specification Procedure B4: Frequency range: 10 Hz to 55 Hz Ampitude: 0.75 mm or Acceeration 98 m/s2 (whichever is ess severe) Tota duration 6 h Fina inspection Visua examination No visibe damage 4.9 Shock Mounting: See Section Mounting for more information Puse shape: Haf sine Acceeration: 490 m/s2 Duration of puse: 11 ms Fina measurements Visua examination No visibe damage Capacitance C/C 5 % of the vaue measured initiay Tangent of oss ange Increase of tan Compared to vaues measured initiay Insuation resistance As specified in section Insuation Resistance of this specification Revision: 01-Ju Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

12 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Cimatic sequence Initia measurements Capacitance Measured in and Tangent of oss ange: Measured initiay in C1A and C1B Dry heat Temperature: 105 C Duration: 16 h Damp heat cycic Test Db First cyce Cod Temperature: - 55 C Duration: 2 h Damp heat cycic Test Db remaining cyces Fina measurements Visua examination No visibe damage Legibe marking Capacitance C/C 5 % of the vaue measured in Tangent of oss ange Increase of tan Compared to vaues measured in Votage proof 2250 V DC ; 1 min between terminations No permanent breakdown or fash-over Insuation resistance SUB-GROUP C Damp heat steady state 56 days, 40 C, 90 % to 95 % RH, no oad Capacitance 50 % of vaues specified in section Insuation Resistance of this specification Initia measurements Tangent of oss ange at 1 khz Fina measurements Visua examination No visibe damage Legibe marking Capacitance C/C 5 % of the vaue measured in Tangent of oss ange Increase of tan Compared to vaues measured in Votage proof 2250 V DC ; 1 min between terminations No permanent breakdown or fash-over Insuation resistance 50 % of vaues specified in section Insuation Resistance of this specification Revision: 01-Ju Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

13 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C Initia measurements Capacitance Tangent of oss ange: at 10 khz 4.13 Impuse votage 3 successive impuses, fu wave, peak votage: X1: 5 kv Max. 24 puses No sefheaing breakdowns or fash-over 4.14 Endurance Duration: h 1.7 x U RAC at 105 C Once in every hour the votage is increased to V RMS for 0.1 s via resistor of 47 ± 5 % Fina measurements Visua examination No visibe damage Legibe marking Capacitance C/C 10 % compared to vaues measured in Tangent of oss ange Increase of tan Compared to vaues measured in Votage proof 2250 V DC ; 1 min between terminations 2100 V AC ; 1 min between terminations and case No permanent breakdown or fash-over Insuation resistance SUB-GROUP C Charge and discharge cyces charged to 420 V DC Discharge resistance: 50 % of vaues specified in section Insuation Resistance of this specification Initia measurements Capacitance Tangent of oss ange: at 10 khz R 420 V DC = x C (du/dt) Fina measurements Capacitance C/C 10 % compared to vaues measured in Tangent of oss ange Increase of tan Compared to vaues measured in Insuation resistance 50 % of vaues specified in section Insuation Resistance of this specification Revision: 01-Ju Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

14 GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C Radio frequency characteristic Resonance frequency 0.9 times the vaue as specified in section Resonant Frequency of this specification SUB-GROUP C Passive fammabiity Cass B Bore of gas jet: Ø 0.5 mm Fue: Butane Test duration for actua voume V in mm 3 : V 250: 10 s 250 < V 500: 20 s 500 < V 1: 30 s V > 1: 60 s One fame appication After removing test fame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning partice must drop from the sampe. 12 mm ~ 8 mm 45.0 SUB-GROUP C Active fammabiity 20 cyces of 5 kv discharges on the test capacitor connected to U RAC. The cheese coth around the capacitors sha not burn with a fame. No eectrica measurements are required. Revision: 01-Ju Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

15 Lega Discaimer Notice Vishay Discaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnoogy, Inc., its affiiates, agents, and empoyees, and a persons acting on its or their behaf (coectivey, Vishay ), discaim any and a iabiity for any errors, inaccuracies or incompeteness contained in any datasheet or in any other discosure reating to any product. Vishay makes no warranty, representation or guarantee regarding the suitabiity of the products for any particuar purpose or the continuing production of any product. To the maximum extent permitted by appicabe aw, Vishay discaims (i) any and a iabiity arising out of the appication or use of any product, (ii) any and a iabiity, incuding without imitation specia, consequentia or incidenta damages, and (iii) any and a impied warranties, incuding warranties of fitness for particuar purpose, non-infringement and merchantabiity. Statements regarding the suitabiity of products for certain types of appications are based on Vishay s knowedge of typica requirements that are often paced on Vishay products in generic appications. Such statements are not binding statements about the suitabiity of products for a particuar appication. It is the customer s responsibiity to vaidate that a particuar product with the properties described in the product specification is suitabe for use in a particuar appication. Parameters provided in datasheets and/or specifications may vary in different appications and performance may vary over time. A operating parameters, incuding typica parameters, must be vaidated for each customer appication by the customer s technica experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, incuding but not imited to the warranty expressed therein. Except as expressy indicated in writing, Vishay products are not designed for use in medica, ife-saving, or ife-sustaining appications or for any other appication in which the faiure of the Vishay product coud resut in persona injury or death. Customers using or seing Vishay products not expressy indicated for use in such appications do so at their own risk. Pease contact authorized Vishay personne to obtain written terms and conditions regarding products designed for such appications. No icense, express or impied, by estoppe or otherwise, to any inteectua property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Materia Category Poicy Vishay Intertechnoogy, Inc. hereby certifies that a its products that are identified as RoHS-Compiant fufi the definitions and restrictions defined under Directive 2011/65/EU of The European Pariament and of the Counci of June 8, 2011 on the restriction of the use of certain hazardous substances in eectrica and eectronic equipment (EEE) - recast, uness otherwise specified as non-compiant. Pease note that some Vishay documentation may sti make reference to RoHS Directive 2002/95/EC. We confirm that a the products identified as being compiant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnoogy, Inc. hereby certifies that a its products that are identified as Haogen-Free foow Haogen-Free requirements as per JEDEC JS709A standards. Pease note that some Vishay documentation may sti make reference to the IEC definition. We confirm that a the products identified as being compiant to IEC conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 9