Interference Suppression Film Capacitors MKP Radial Potted Type

Transcription

1 MKP 339 X2 Interference Suppression Film Capacitors FEATURES 168x12(halfpage) l w l w 7.5 to 27.5 mm lead pitch. Supplied loose in box, taped on ammopack or reel P h imensions in mm (1) F -F <0.3mm F = /- 0.1 mm lt Ø dt F' (1) F h h' H Ø dt Lead (Pb)-free product RoHS-compliant product RATE VOLTAGE AC 275 V; 50 to 60 Hz PERMISSIBLE C VOLTAGE e3 RoHS COMPLIANT FOCUS PROUCT C 630 V APPLICATIONS X2 class For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V(AC). For application limitations please refer page 9. REFERENCE STANARS IEC nd edition and EN IEC 60065, pass. flamm. class B 250 V: CSA-C22.2 No 1; UL V: CSA-C22.2 No 8; CQC 275 V: ENEC 305 V: UL1283 MARKING C-value; tolerance; rated voltage; sub-class; manufacturer s type designation; code for dielectric material, only for pitch 15 mm; manufacturer location; manufacturer s emblem; year and week IELECTRIC Polypropylene film ELECTROES Metallized film CONSTRUCTION Mono construction ENCAPSULATION Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 CLIMATIC TESTING CLASS ACC. TO EN /110/56/B CAPACITANCE RANGE (E12 SERIES) E12 series to 4.7 µf Preferred values acc. to E6 CAPACITANCE TOLERANCE ± 20 %; ± 10 % LEAS Tinned wire (Lead (Pb)-free) RATE TEMPERATURE 110 C MAXIMUM APPLICATION TEMPERATURE 110 C for C > 470 nf 125 C for C 470 nf ETAIL SPECIFICATION For more detailed data and test requirements contact: rfi@vishay.com For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

2 Interference Suppression Film Capacitors MKP 339 X2 COMPOSITION OF CATALOG NUMBER TYPE AN PITCHES 7.5 mm 7.5 mm (bent back) mm X mm 22.5 mm 27.5 mm CAPACITANCE (numerically) MULTIPLIER (nf) Example: 104 = 10 x 10 = 100 nf BFC2 339 XX XX X 2222 (*) 339 XX XX X (*) old ordering code TYPE PACKAGING STANAR IMENSIONS C-TOL COE NUMBER 339 X2 loose in box taped 1) loose in box lead length /- 0.5 mm or 3.5 ± 0.3 mm BFC lead length 5.0 ± 1.0 mm BFC lead length 25.0 ± 2.0 mm BFC reel: H = 18.5 mm; P o = 12.7 mm and 15.0 mm ± 20 % BFC ammopack: H = 18.5 mm; P o = 12.7 mm BFC reel: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC lead length /- 0.5 mm or 3.5 ± 0.3 mm BFC lead length 5.0 ± 1.0 mm BFC lead length 25.0 ± 2.0 mm BFC reel: H = 18.5 mm; P o = 12.7 mm and 15.0 mm ± 10 % BFC ammopack: H = 18.5 mm; P o = 12.7 mm BFC taped 1) reel: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC PACKAGING ALTERNATIVE LARGER PITCH SIZES C-TOL COE NUMBER lead length /- 0.5 mm or 3.5 ± 0.3 mm BFC loose in box lead length 5.0 ± 1.0 mm BFC ± 20 % lead length 25.0 ± 2.0 mm BFC taped reel or ammopack: H = 18.5 mm; P 0 = 12.7 mm BFC lead length /- 0.5 mm or 3.5 ± 0.3 mm BFC loose in box lead length 5.0 ± 1.0 mm BFC ± 10 % lead length 25.0 ± 2.0 mm BFC taped reel or ammopack: H = 18.5 mm; P 0 = 12.7 mm BFC Note 1. For detailed tape specification refer to Packaging Information; ocument Number: For technical questions, contact: rfi@vishay.com Revision: 07-Aug

3 MKP 339 X2 Interference Suppression Film Capacitors SPECIFIC REFERENCE ATA MKP 339 X2 275 VAC ESCRIPTION VALUE Tangent of loss angle: at 1 khz at 10 khz C < 470 nf 10 x x nf C 1µF 20 x x 10-4 C>1µF 30 x Rated voltage pulse slope (du/dt) R at 385 V (C) 100 V/µs R between leads, for C 0.33 µf at 100 V; 1 min > MΩ RC between leads, for C > 0.33 µf at 100 V; 1 min > 5000 s R between leads and case; 100 V; 1 min > MΩ Withstanding (C) voltage (cut off current 10 ma); rise time 100 V/s: C 1 µf 2200 V; 1 min C>1 µf 1800 V; 1 min Withstanding (AC) voltage between leads and case 2050 V; 1 min Max. application temperature 110 C for C > 470 nf 125 C for C 470 nf PREFERRE TYPES: U Rac = 275 V; C-tol = ± 20 % C (µf) PITCH IMENSIONS 1) w x h (h ) x l MASS (g) I t = /- 0.5 mm CATALOG NUMBER BFC AN PACKAGING LOOSE IN BOX TAPE short leads 2) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm SPQ SPQ x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 10.5 x x 10.0 x x 11.5 x x 11.0 x x 12.0 x ) 6.0 x 12.0 (14.0) x x 11.0 x x 12.0 x ) 6.0 x 12.0 (14.0) x x 13.5 x ) 7.0 x 13.5 (15.5) x x 15.0 x ) 8.5 x 15.0 (17.0) x x 16.5 x ) 10.0 x 16.5 (18.5) x For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

4 Interference Suppression Film Capacitors MKP 339 X2 C (µf) PITCH IMENSIONS 1) w x h (h ) x l MASS (g) I t = /- 0.5 mm CATALOG NUMBER BFC AN PACKAGING LOOSE IN BOX TAPE short leads 2) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm Notes 1. h = height for straight leads and h = height for bent back leads 2. I t = /- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ± 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. 3. Bent back to pitch = 7.5 mm. SPQ SPQ x 18.0 x x 19.5 x x 23.0 x x 25.0 x x 28.0 x x 31.0 x ALTERNATIVE LARGER PITCH SIZE: U Rac = 275 V; C-tol = ± 20 % C (µf) PITCH IMENSIONS w x h x l MASS (g) I t = /- 0.3 mm CATALOG NUMBER BFC AN PACKAGING LOOSE IN BOX TAPE short leads 1) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm Note 1. I t = /- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ± 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. SPQ SPQ x 11.0 x x 15.5 x x 16.5 x x 19.0 x x 21.0 x ocument Number: For technical questions, contact: rfi@vishay.com Revision: 07-Aug

5 MKP 339 X2 Interference Suppression Film Capacitors PREFERRE TYPES: U Rac = 275 V; C-tol = ± 10 % C 4) (µf) PITCH IMENSIONS 1) w x h (h ) x l MASS (g) I t = /- 0.5 mm CATALOG NUMBER BFC AN PACKAGING LOOSE IN BOX TAPE short leads 2) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm Notes 1. h = height for straight leads and h = height for bent back leads. 2. I t = /- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ±0 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. 3. Bent back to pitch = 7.5 mm. 4. Available in E12 series on request. SPQ SPQ x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 9.0 x x 10.0 x x 10.5 x x 10.0 x x 11.5 x x 10.0 x x 11.0 x ) 5.0 x 11.0 (13.0) x x 12.0 x ) 6.0 x 12.0 (14.0) x x 11.0 x x 12.0 x ) 6.0 x 12.0 (14.0) x x 13.5 x ) 7.0 x 13.5 (15.5) x x 15.0 x ) 8.5 x 15.0 (17.0) x x 16.5 x ) 10.0 x 16.5 (18.5) x x 19.5 x x 22.0 x x 23.0 x x 25.0 x x 31.0 x For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

6 Interference Suppression Film Capacitors MKP 339 X2 ALTERNATIVE LARGER IMENSIONS: U Rac = 275 V; C-tol = ± 10 % C 2) (µf) PITCH IMENSIONS w x h x l MASS (g) I t = /- 0.5 mm CATALOG NUMBER BFC AN PACKAGING LOOSE IN BOX TAPE short leads 1) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm SPQ SPQ x 11.0 x x 15.5 x x 16.5 x x 19.0 x x 21.0 x Notes 1. I t = /- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ± 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. 2. Available in E12 series on request. TAPING INFORMATION AN LEA IAMETER PITCH (tolerance: ± 0.4 mm) TYPE IMENSIONS 1) LEA IAMETER 7.5 mm ammopack H = 18.5 mm, P o = 12.7 mm 0.50 ± 0.05 mm 10.0 mm bent back to 7.5 mm ammopack H = 16 mm, P o = 15.0 mm 0.60 ± 0.06 mm 15.0 mm bent back to 7.5 mm (w 6 mm) reel H = 16 mm, P o = 15.0 mm 0.60 ± 0.06 mm 15.0 mm bent back to 7.5 mm (w > 6 mm) reel H = 16 mm, P o = 15.0 mm 0.80 ± 0.08 mm 10.0 mm ammopack H = 18.5 mm, P o = 12.7 mm 0.60 ± 0.06 mm 15.0 mm (w 6 mm) reel H = 18.5 mm, P o = 12.7 mm 0.60 ± 0.06 mm 15.0 mm (w > 6 mm) reel H = 18.5 mm, P o = 12.7 mm 0.80 ± 0.08 mm 22.5 mm reel H = 18.5 mm, P o = 12.7 mm 0.80 ± 0.08 mm 27.5 mm not available 0.80 ± 0.08 mm Note 1. Standard reel diameter = 500 mm, reel diameter = 356 mm is available on request. a) Other taping possibilities are available on request. APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES FILE NUMBERS APPROVAL MARK U.S.A. and Canada (for AC 250 V) UL1414 and CSA-C22.2 No.1 1 nf to 1 µf E R U.S.A. (for AC 305 V) Canada (for AC 275 V) UL nf to 4.7 µf E CSA-C22.2 No.8 1 nf to 4.7 µf China CQC 1nFto4.7 µf CQC (Roeselare) CQC (Shanghai) CQC (Famalicao) CB TEST CERTIFICATE (for AC 275 V) 1 nf to 4.7 µf: 55/110/56/B FI 3580 Europe EN IEC nd edition 1 nf to 4.7 µf FI AI CQC 16 ocument Number: For technical questions, contact: rfi@vishay.com Revision: 07-Aug

7 MKP 339 X2 Interference Suppression Film Capacitors MOUNTING NORMAL USE The capacitors are designed for mounting on printed -circuit boards.the capacitors packed in bandoliers are designed for mounting in pinted-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to Packaging information. eccentricity b max = b mm SPECIFIC METHO OF MOUNTING TO WITHSTAN VIBRATION AN SHOCK l max = l mm CBA116 In order to withstand vibration and shock tests,it must be insured that the stand-off pips are in good contact with the printed circuit board: For pitches 15 mm capacitors shall be mechanically fixed by the leads For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTE CIRCUIT BOAR The maximum length and width of film capacitors is shown in the figure: Eccentricity as in figure. The maximum eccentricity is smaller than or equal to the product concerned Product heigth with seating plane as given by IEC as reference: h max mm or h max h mm. STORAGE TEMPERATURE Storage temperature: T stg = - 25 to + 40 C with RH maximum 80 % without condesation RATINGS AN CHARACTERISTICS REFERENCE CONITIONS Unless otherwise specified, all elctrical values apply to an ambient temperature of 23 ± 1 C, an atmospheric pressure of 86 to 106 kpa and a relative humidity of 50 ± 2 %. For reference testing, a conditioning period shall be applied over 96 ± 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

8 Interference Suppression Film Capacitors MKP 339 X2 CHARACTERISTICS ΔC/C 2(%) 4 0 typical Impedance 10 3 Impedance (%) nf 4.7 nf 10 nf 47 nf 100 nf - 2 max nf 470 nf 1000 nf min Tamb ( C) f (Hz) 10 8 Tanget of loss angle 10 3 Resonant frequency 10 2 issipation factor (x 10-4) C > 1 µf 220 nf < C 1 µf 47 nf < C 220 nf 10 nf < C 47 nf C 10 nf f (MHz) X f (Hz) C (nf) Max RMS voltage and current as a function of frequency 10 3 AC voltage (V) AC current (ma) nf 1000 nf 470 nf 100 nf 47 nf 10 nf 4.7 nf Tamb 105 C f (Hz) Tamb 105 C f (Hz) nF ocument Number: For technical questions, contact: rfi@vishay.com Revision: 07-Aug

9 MKP 339 X2 Interference Suppression Film Capacitors INSULATION RESISTANCE 10 6 RC (s) Tamb ( C) APPLICATION NOTES For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. These capacitors are not intended for series impedance application. For these situations in case safety approvals are requested, please refer to our special capacitors of 1772 series with internal series connection. The maximum ambient temperature must not exceed 110 C for C > 470 nf 125 C for C 470 nf Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (C) and divided by the applied voltage. INSPECTION REQUIREMENTS GENERAL NOTES 1. Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, IEC_publication EN (IEC ) and Section One of this specification. 2. In this table: = destructive N = non-distructive Group C inspection requirements SUB-CLAUSE NUMBER AN TEST OR N CONITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 imensions (detail) As specified in Chapters General data of this specification Initial measurements Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90 No visible damage For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

10 Interference Suppression Film Capacitors MKP 339 X2 SUB-CLAUSE NUMBER AN TEST OR CONITIONS N 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 C uration: 10 s 4.19 Component solvent Isopropylalcohol at room temperature resistance Method: 2 Immersion time: 5 ± 0.5 min Recovery time: Min 1 hour, max 2 hours Final measurements Visual examination SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 Initial measurements 4.20 Solvent resistance of the marking: see Section General notes ; item 5. Tangent of loss angle Insulation resistance Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 ± 0.5 min θa = - 55 C PERFORMANCE REQUIREMENTS No visible damage Legible marking ΔC/C 5 % of the value measured initially. Increase of tan δ: for: C 1 µf or for: C > 1 µf Compared to values measured initially As specified in Section Insulation Resistance of this specification No visible damage Legible marking 4.6 Rapid change of temperature θb = C 5 cycles uration t = 30 min Inspection Visual examination No visible damage 4.7 Vibration (see note 3.1) Mounting: see Section Mounting of this specification Procedure B4 Frequency range: 10 to 55 Hz. Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 hours Final inspection Visual examination No visible damage 4.9 Shock (see note 3) Mounting: see Section Mounting for more information Pulse shape: half sine Acceleration: 490 m/s² uration of pulse: 11 ms ocument Number: For technical questions, contact: rfi@vishay.com Revision: 07-Aug

11 MKP 339 X2 Interference Suppression Film Capacitors SUB-CLAUSE NUMBER AN TEST OR CONITIONS N Final measurements Visual examination Tangent of loss angle PERFORMANCE REQUIREMENTS No visible damage ΔC/C 5 % of the value measured initially. Increase of tan δ: for: C 1 µf or for: C > 1 µf Compared to values measured initially Insulation resistance SUB-GROUP C1 COMBINE SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AN C1B 4.11 Climatic sequence Initial measurements Measured in and Tangent of loss angle: Measured initially in C1A and C1B Temperature: 110 C ry heat uration: 16 hours amp heat cyclic Test b First cycle Temperature: - 55 C As specified in Section Insulation Resistance of this specification Cold uration: 2 hours amp heat cyclic Test b remaining cycles Visual examination No visible damage Final measurements Tangent of loss angle Voltage proof 1200 V (C); 1 min between term. Insulation resistance SUB GROUP C amp heat steady state 56 days; 40 C; 90 to 95 % RH no load Legible marking ΔC/C 5 % of the value measured in Increase of tan δ: for: C 1 µf or for: C > 1 µf Compared to values measured in No permanent breakdown or flash-over 50 % of values specified in Section Insulation resistance of this specification Initial measurements Tangent of loss angle: For C 1 µf at 10 khz or For C > 1 µf at 1 khz For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

12 Interference Suppression Film Capacitors MKP 339 X2 SUB-CLAUSE NUMBER AN TEST OR N CONITIONS Final measurements Visual examination Tangent of loss angle Voltage proof 1200 V (C); 1 min between term. Insulation resistance PERFORMANCE REQUIREMENTS No visible damage Legible marking ΔC/C 5 % of the value measured in Increase of tan δ: for: C 1 µf or for: C > 1 µf Compared to values measured in No permanent breakdown or flash-over 50 % of values specified in Section Insulation resistance of this specification SUB-GROUP C Initial measurements Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kv for C 1 µf X2: 2.5 kv/ C for C > 1 µf Max.24 pulses 4.14 Endurance uration: 1000 hours 1.25 x U Rac at 110 C Once in every hour the voltage is increased to 1000 V (RMS) for 0.1 s via resistor of 47 Ω ± 5 % Final measurements Visual examination Tangent of loss angle No selfhealing breakdowns or flashover No visible damage Legible marking ΔC/C 10 % compared to values measured in Increase of tan δ: for: C 1 µf or for: C > 1 µf Compared to values measured in No permanent breakdown or flash-over Voltage proof 1200 V (C); 1 min between terminations V (C); 1 min between terminations and case. 50 % of values specified in Section Insulation resistance of this specification Insulation resistance ocument Number: For technical questions, contact: rfi@vishay.com Revision: 07-Aug

13 MKP 339 X2 Interference Suppression Film Capacitors SUB-CLAUSE NUMBER AN TEST OR N CONITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C Charge and discharge cycles (50 c/s) charge to UR half sinewave uration: 5 ms ischarge resistance: 385 Vdc R = C ( du dt) R min = 2.2 Ω Initial measurements Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz Final measurements Tangent of loss angle ΔC/C 10 % compared to values measured in Increase of tan δ: for: C 1 µf or for: C > 1 µf Compared to values measured in % of values specified in Section Insulation resistance of this specification Insulation resistance SUB-GROUP C Radio frequency characteristic SUB-GROUP C Passive flammability Class B Resonance frequency Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm³: V 250: 10 s 250 < V 500: 20 s 500 < V 1750: 30 s V > 1750: 60 s One flame application As specified in Section Resonant frequency of this specification. ± 10 % After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C Active flammability 20 x 2.5 kv discharges on the test capacitor connected to U Rac The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. For technical questions, contact: rfi@vishay.com ocument Number: Revision: 07-Aug-07

14 Notice Legal isclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. ocument Number: Revision: 08-Apr-05 1