Teste a dividere Toroidali Toroidal indexers Toroidalschaltkurvengetriebe
|
|
- Pamela Moore
- 5 years ago
- Views:
Transcription
1 ITALPLANTsrl Teste a dividere Toroidali Toroidal indexers Toroidalschaltkurvengetriebe Enorme foro interno Enormous inner hole Grosser Innenraum Anello toroidale di duralluminio Alluminium toroidal dial plate Toroidal Ring aus Hartalluminium Costruzione sottile Slim construction Flache Kontruktion Bassa inerzia interna Low internal inertia Niedriges Trägheitsmoment Innen Ottima accuratezza Optimum accuracy Sorgfältige Ausführung 4 dimensioni: sizes: Grössen: Richiedete i disegni di installazione al nostro ufficio tecnico Installation drawings on request Installationspläne anfordern
2 ITALPLANT TOROIDAL INDEXERS SERIES TI TI CATALOGUE SEPTEMBER
3 SPARE PARTS ITALPLANT TOROIDAL INDEXERS SERIES TI To meet every need to get spare parts, please contact our commercial office. In case of order, please always specify: 1. registration number (on the label) 2. serial number (6-7 digits) 3. model (on the label) 4. number and date of the order ORDERING PROCEDURE The following ordering procedure is intended only as a general guideline for the minimum information required when ordering a conveyor, as soon as the design phase becomes to an end. Options and adjustments can be ordered up to the beginning of manufacturing by us. Dial plate diameter ( if existing upon our indexer dial plate) Payload weight Pitch radius of payloads Working forces Friction or external resistance torques Index time Dwell time Cyc/min 2
4 ITALPLANT TOROIDAL INDEXERS SERIES TI TI STANDARD MODELS 3
5 ITALPLANT TOROIDAL INDEXERS SERIES TI Fori M8x12 per attrezzature su diametro a richiesta del cliente Holes M8x12 for fixtures on diameter by customer's choice N 6 fori ø10.5 per fissaggio su ø785 N 6 holes ø10.5 for fixing on ø785 N 2 fori spine ø10h7 su ø785 (N.4-5) N 2 holes for dowel ø10h7 on ø785 (N.4-5) N 3 fori M12 per il sollevamento (N.1-2-3) N 3 holes M12 for lifting (N.1-2-3) 1 Non eseguire fori in questa area Do not execute holes in this area Sez. A-A Albero di ingresso Input shaft TI 800 PROIEZIONE 3 Projection 3 PROIEZIONE 1 PROIEZIONE 2 Projection 1 Projection 2 4
6 ITALPLANT TOROIDAL INDEXERS SERIES TI Fori M10x15 per attrezzature su diametro a richiesta del cliente Holes M10x15 for fixtures on diameter by customer's choice N 6 fori ø12.5 per fissaggio su ø1130 N 6 holes ø12.5 for fixing su ø Non eseguire fori in questa zona Do not execute holes in this area N 2 fori spine ø12h7 su ø1130 (N.4-5) N 2 holes for dowel ø12h7 on ø1130 (N.4-5) N 3 fori M12 per il sollevamento (N.1-2-3) N 3 holes M12 for lifting (N.1-2-3) Sez. A-A Albero di ingresso Input shaft TI 1200 PROIEZIONE 3 Projection 3 PROIEZIONE 1 PROIEZIONE 2 Projection 1 Projection 2 5
7 ITALPLANT TOROIDAL INDEXERS SERIES TI Fori M10X20 per attrezzature su diametro a richiesta del cliente Holes M10X20 for fixtures on diameter by customer's choice N 8 fori ø12.5 per fissaggio su 1585 N 8 holes ø12.5 for fixing on 1585 N 2 fori Spine ø12h7 on ø1585 (N.4-5) N 2 holes for dowel ø10h7 on ø1585 (N.4-5) N 3 fori M16 per il sollevamento su ø1585 (N.1-2-3) N 3 holes M16 for lifting on ø1585 (N.1-2-3) Sez. A-A Albero di ingresso Input shaft Non eseguire fori in questa area Do not execute holes in this area TI 1600 PROIEZIONE 3 Projection 3 PROIEZIONE 1 PROIEZIONE 2 Projection 1 Projection 2 6
8 ITALPLANT TOROIDAL INDEXERS SERIES TI Fori M10x20 per attrezzature su diametro a richiesta del cliente Holes M10x20 for fixtures on diameter by customer's choice N 8 fori ø12.5 per fissaggio su ø1985 N 8 holes ø12.5 for fixing su ø Non eseguire fori in questa area Do not execute holes in this area N 2 fori spine ø12h7 su ø1985 (N.4-5) N 2 holes for dowel ø12h7 on ø1985 (N.4-5) N 3 fori M16 per il sollevamento (N.1-2-3) N 3 holes M16 for lifting (N.1-2-3) Sez. A-A Albero di ingresso Input shaft TI 2400 PROIEZIONE 3 Projection 3 PROIEZIONE 1 PROIEZIONE 2 Projection 1 Projection 2 7
9 Teste a dividere Toroidali Toroidal indexers Toroidalschaltkurvengetriebe A B C D Tipi/Types/Grössen A (mm) B (mm) C (mm) D (mm) TI TI TI TI ITALPLANTsrl Via Gonin, 45/A, 45/B Torino (Italy) - Tel Fax info@italplant.com
10 ITALPLANTsrl Teste a dividere Toroidali Globoidali Toroidal indexers with globoidal cam Toroidalschaltkurvengetriebe mit globoid kurve Enorme foro interno Enormous inner hole Grosser Innenraum Anello toroidale di duralluminio Alluminium toroidal dial plate Toroidal Ring aus Hartalluminium Costruzione sottile Slim construction Flache Kontruktion Bassa inerzia interna Low internal inertia Niedriges Trägheitsmoment Innen Ottima accuratezza Optimum accuracy Sorgfältige Ausführung 3 dimensioni: sizes: Grössen: Richiedete i disegni di installazione al nostro ufficio tecnico Installation drawings on request Installationspläne anfordern
11 ITALPLANT TOROIDAL INDEXERS SERIES TIG TIG CATALOGUE SEPTEMBER
12 SPARE PARTS ITALPLANT TOROIDAL INDEXERS SERIES TIG To meet every need to get spare parts, please contact our commercial office. In case of order, please always specify: 1. registration number (on the label) 2. serial number (6-7 digits) 3. model (on the label) 4. number and date of the order ORDERING PROCEDURE The following ordering procedure is intended only as a general guideline for the minimum information required when ordering a conveyor, as soon as the design phase becomes to an end. Options and adjustments can be ordered up to the beginning of manufacturing by us. Dial plate diameter ( if existing upon our indexer dial plate) Payload weight Pitch radius of payloads Working forces Friction or external resistance torques Index time Dwell time Cyc/min 2
13 ITALPLANT TOROIDAL INDEXERS SERIES TIG TIG STANDARD MODELS 3
14 ITALPLANT TOROIDAL INDEXERS SERIES TIG N 7 fori per viti M12 per fissaggio e sollevamento N 7 holes for screws M12 for fixing and lifting N 2 fori spina ø12h7 (opzionali) N 2 holes for dowel ø12h7 (optional) Sez. A-A Albero di ingresso Input shaft Non eseguire fori in questa area Do not execute holes in this area Fori per attrezzature M10x15 su diametro a richiesta del cliente Holes for fixtures M10x15 on diameter by customer's choice TIG 1200 Projection 3 PROIEZIONE 1 Projection 1 PROIEZIONE 2 Projection 2 4 PROIEZIONE 3
15 ITALPLANT TOROIDAL INDEXERS SERIES TIG N 8 fori per viti M16 per fissaggio e sollevamento N 8 holes for screws M16 for fixing and lifting N 2 fori spina ø12h7 (opzionali) N 2 holes for dowel ø12h7 (optional) Non eseguire fori in questa area Do not execute holes in this area Fori per attrezzature M10x15 su diametro a richiesta del cliente Holes for fixtures M10x15 on diameter by customer's choice Sez. A-A Albero di ingresso Input shaft TIG 1600 PROIEZIONE 3 Projection 3 PROIEZIONE 1 Projection 1 PROIEZIONE 2 Projection 2 5
16 ITALPLANT TOROIDAL INDEXERS SERIES TIG N 7 fori per viti M16 per fissaggio e sollevamento N 7 holes for screws M16 for fixing and lifting N 2 fori spina ø12h7 (opzionali) N 2 holes for dowel ø12h7 (optional) Non eseguire fori in questa area Do not execute holes in this area Fori per attrezzature M10x15 su diametro a richiesta del cliente Holes for fixtures M10x15 on diameter by customer's choice Sez. A-A Albero di ingresso Input shaft TIG 2400 PROIEZIONE 3 Projection 3 PROIEZIONE 1 PROIEZIONE 2 Projection 1 Projection 2 6
17 Teste a dividere Toroidali Globoidali Toroidal indexers with globoidal cam Toroidalschaltkurvengetriebe mit globoid kurve Tipi/Types/Grössen A (mm) B (mm) C (mm) D (mm) TIG TIG TIG ITALPLANTsrl Via Gonin, 45/A, 45/B Torino (Italy) - Tel Fax info@italplant.com
CATENARIE CATENARIE. Scilm can provide customized profiles.
IL PROFILO CATENARIA È STUDIATO PER ESSERE APPLICATO SU TUTTI I MOBILI BASE SIA NELLA PARTE ANTERIORE CHE POSTERIORE. È DI RIDOTTE DIMENSIONI E DI FACILE APPLICAZIONE, OFFRE UNA OTTIMALE RESA ESTETICA
More informationtenonatrici - mortasatrici tenoners - mortisers wood sectorial machines
tenonatrici - mortasatrici tenoners - mortisers wood sectorial machines LA GAMMA - THE RANGE Tenonatrice stondante automatica a due banchi di lavoro Automatic twin-table round-end tenoner Larghezza x spessore
More informationSGP-S - Compact Parallel Gripper
11: Double acting Patented backlash adjusting system. High performance in a compact size. The rugged construction lends itself to heavy-duty applications for a trouble-free long life without maintenance.
More informationSERVO INDEXING AT MECHANICAL INDEXER PRICES
SERVO INDEXING AT MECHANICAL INDEXER PRICES 1 Servo indexing at mechanical indexer prices The EZ INDEXER servo indexers are high precision indexing machines designed to be low cost without sacrificing
More informationMEASURE SMALL HOLES BORE GAGES FROM DIAMETER "
MEASURE SMALL HOLES BORE GAGES FROM DIAMETER 0.015" Maximum Accuracy Linear ±0.000040" (0.001 ) Repeatability ±0.000040" (0.001 ) Dial Indicator Electronic Indicator Fast, Dependable Gaging Available in:
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More informationPPC Series Precision Power Chucks
Precision Workholding Technology PPC Series Precision Power Chucks www.microcentric.com The World s Most Accurate Power Chuck Improve productivity and lower costs by enhancing workpiece quality...... through
More informationP /8 Ring Diameter 90. Trim Ring Mounting Holes P /8. 393/16 Ring Diameter. Stud Minimum
PARTS LIST VARIABLE Top Over Head Support Bracket 1 872070 P4000-SMR Over Head Joiner Bracket 1 VARIABLE Bottom Over Head Bracket 1 79741 P4000-SMR 4 Angled Leg 4 100-00230-14 1/4-20 x 31/2 RD. HD. MS.
More informationMACHINING CENTER EC43 5 Axes with Pallet Loader
Meccaniche Arrigo Pecchioli Via di Scandicci 221-50143 Firenze (Italy) - Tel. (+39) 055 70 07 1 - Fax (+39) 055 700 623 e-mail: pear@pear.it - www.pear.it Other files available for additional information
More information2-jaw parallel self-centering pneumatic gripper (series GM)
GM -jaw parallel self-centering pneumatic gripper (series GM) Double acting. The rugged construction lends itself to heavy duty applications for a trouble free long life without maintenance. Wide choice
More informationPrice $ $ $ Filtered compressed air, lubricated or non-lubricated
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS-P) Double-acting radial motion. The gripping force is constant through the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More informationMateriale / Material. Davanti / Front side Dietro / Back side
Valvole e innesti DI CarICa NGV2 Valvola di caricainnesto Filling valvereceptacle Inox / Stainless Steel 40 C +120 C Ø 10 mm Ø35 75 71 NGV2 12. F T F ATTACCHI PER TUBO / CONNECTION FOR PIPE 12: Per tubo
More information2-jaw self centering rocking pneumatic gripper (series GW)
2-jaw self centering rocking pneumatic gripper (series ) Double acting. Long life and reliability, maintenance free. Various options for fastening. Optional proximity magnetic sensors. Spring closed (-NC)
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationMAX PROP WHISPER patented propeller
MAX PROP WHISPER patented propeller installation instructions INTRODUCTION Thank you for choosing a feathering propeller MAX PROP WHISPER. This instruction manual will be used to answer all your questions
More information2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS)
PS 2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS) Double-acting radial motion. The gripping force is constant throughout the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationEMCal ALICE modules stacking / assembly
EMCal ALICE modules stacking / assembly User s Manual / Tutorial Manoel Dialinas updated 15.02.2009 The EMCal module Put assembly fixture dust clean, and all surfaces degreased. 1. Check guide rods system
More informationMeasuring Automaton for Joint Housing Plunging Joint
Measuring Automaton for Joint Housing Plunging Joint measuring automaton for 100% check and classification measurement of diameters, lengths, location tolerances (concentricities), pitches Ø classifying
More informationcustom made quality PIASTRINI Plates / Plaques PIASTRINI Plates / Plaques
custom made quality art 001/Z Piastrino piano a 6 fori con ceche bombate, mm 47x70 zincato. - 47x70 mm galvanized, flat plate with 6 holes having concave countersinks. - Plaque plate à 6 trous à fraisures
More informationSPIETH Locknuts. Series MSW. Works Standard SN 04.03
SPIETH Locknuts Series MSW Works Standard SN 0.03 SPIETH Locknuts Series MSW SPIETH locknuts offer a range of technical benefits, qualified by their special system and production. Under high levels of
More informationDesign Guide. Original version of the design guide
Page 1 of 12 Original version of the design guide For Series Components Spieth locknuts (precision locknuts) MSR 58x1.5 MSR 60x1.5 MSR 60x2 MSR 62x1.5 MSR 65x1.5 MSR 65x2 MSR 68x1.5 MSR 70x1.5 MSR 70x2
More informationOperating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
More informationInstallation and Operational Instructions for ROBA -DS couplings Type 95. _ (disk pack HF) Sizes
95. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting
More informationEuroMag Series PCB Mount Terminal Blocks. EM3123 Series Euro-Mag Terminal Blocks 3.50 Centers; Modular. Part Numbering System
EuroMag PCB Mount Terminal Blocks EM.0 Centers; Modular Rating: A, 00V Center Spacing: 0. (.0mm) Wire Range: #1- AWG Housing Material: Black Polyamide Type /, V0 Screw Size: M.0 Chromate Steel Operating
More information3. X-axis assembly. 3. X-axis assembly. Written By: Jakub Dolezal manual.prusa3d.com/ Page 1 of 13
3. X-axis assembly Written By: Jakub Dolezal 2018 manual.prusa3d.com/ Page 1 of 13 Step 1 Tools necessary for this chapter Needle-nose pliers for zip tie trimming. 2.5mm Allen key for M3 screws 2mm Allen
More informationFORM HOLDING CLAMPS 8. 1 FORM HOLDING CLAMPS JAWS MOUNTING-ON-LATHE ADAPTERS. FORM HOLDING CLAMPS Wedge Style/Round
pag..4 JAWS pag..6 MOUNTING-ON-LATHE ADAPTERS pag..7 Wedge Style/Round pag.. Wedge Style/Square pag..10 pag..12 JAWS for external Form Holding pag..14 JAWS for internal Form Holding pag..16 TAPERED SCREWS
More informationTC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME
TC FIXED-STATION ROTARY INDEXING TABLES TC ROTARY INDEXING TABLE TC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME EXTENDED WARRANTY Using our rotary table control system minimises brake wear. This
More informationMKS. MKS Series MKS 40 MKS 45 MKS 50 MKS 55 MKS 60 MKS 65. Repair Manual
MKS Series MKS 40 MKS 45 MKS 50 MKS 55 MKS 60 MKS 65 Repair Manual INDEX. INTRODUCTION 3 2. REPAIR INSTRUCTIONS 3 2. Crank Mechanism Repair...3 2.. Crank Mechanism Disassembly...4 2..2 Crank Mechanism
More informationStandard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
More informationAE SERIES ACTUATORS 2016 EDITION. The Best Way To Automate Your Process. Modulating Capable. Extended Duty Cycle Models Fast Acting Models
The Best Way To Automate Your Process St a n d a r d Vo l t age s 110/240/380/480V 24/24VDC Modulating Capable Extended Duty Cycle Models Fast Acting Models AE SERIES ACTUATORS 2016 EDITION Max-Air Technology,
More informationEngineering Data Gas Spring Clamps
Engineering Data Gas Spring Clamps The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13
More information+ A Phoenix Mecano Company. RK DuoLine 160. Degree of protection IP 40. the new industry benchmark
RK ROSE A Phoenix Mecano Company RK DuoLine 160 Degree of protection IP 40 the new industry benchmark Greater reliability in automation......thanks to RK DuoLine 160, the new generation of spindles and
More informationElectromechanical rotary indexing tables TC-T. Technology that inspires
Electromechanical rotary indexing tables TC-T Technology that inspires Technology that inspires V Speed gradient a Acceleration gradient The modified curved path of the cam allows for a very smooth and
More informationIM126.1 ISTRUZIONI DI MONTAGGIO ASSEMBLY DIAGRAM LETTO BOOKBED: BED BOOKBED
ISTRUZIONI DI MONTAGGIO LETTO BOOKBED: ASSEMBLY DIAGRAM BED BOOKBED livellatore / adjustable feet perno / pivot Iniziare il montaggio inserendo i livellatori nei fianchi. Avvitare i perni nelle bussole
More information2300 Series DustPruf End Drive Conveyors
00 Series DustPruf End Drive Conveyors Installation, Maintenance and Parts Manual Featuring: DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866 TEL: 6-67-7600
More informationVersion: 1.0 Revised: 6/8/2011. CBU Assembly Instructions Manual
CBU Assembly Instructions Manual Contents 1 General... 3 2 Package... 4 2.1 Packing order... 4 2.2 Unpacking... 5 3 Assembly of the body... 6 3.1 General... 6 3.2 Mounting base drilling chart... 8 3.3
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 115 inch Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More informationDichiarazione di conformità Declaration of conformity. Procedura di valutazione della conformità Conformity Assessment Procedure Followed
P.A. S.p.A. EQUIPAGGIAMENTI TECNICI DEL LAVAGGIO VIA MILANO, 13 CASELLA POSTALE 115 42048 RUBIERA (REGGIO EMILIA) ITALY Tel. +39 0522 623611 Fax. +39 0522 629600 R.E.A. RE 156319 R.I. RE11535 Mecc. RE
More informationPERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
More informationRELM20 high accuracy linear scale
L-9517-9219-06-B RELM20 ZeroMet scale is manufactured from near zero thermal expansion material, ensuring the high level of accuracy is maintained across the full temperature range. It can be mounted direct
More informationEraser Conveyor Belt Cleaning System IWARNING Always obey all applicable safety rules. Be sure all power to the conveyor has been disconnected and con
INSTALLATION GUIDE LIB-CP-REA-03-01 Rev. 10 Eraser Conveyor Belt Cleaning System ARGONICS Eraser Conveyor Belt Cleaning System IWARNING Always obey all applicable safety rules. Be sure all power to the
More informationAFB (AIR FAN BEARING) INSTALLATION GUIDE
654 AFB (AIR FAN BEARING) INSTALLATION GUIDE AFB PARTS Bearing Housing - Secured together with two 3/8 x 1.25 in. Cap Screws Black Wiper Seals - Secured together with O-ring cord (Subsequently depicted
More informationStepper Motors WE CREATE MOTION
WE CREATE MOTIO PRECIstep Technology EW Page FDM 6 Two Phase with Disc Magnet, AM 8 Two Phase,6 AM Two Phase,6 ADM S Two Phase with Disc Magnet, 6 7 AM Two Phase 6 8 AM Two Phase AM -R Two Phase WE CREATE
More informationRPE Parallel Gripper- Electric Gripper Series
1.14 RPE Parallel Gripper- Electric Gripper Series Failsafe Operation: Spring closed feature allows for full grip force during power off conditions. Electrically Actuated: Requires simple 24VDC pulsed
More informationOverview Universal Shaft Transmitter
Overview Universal Shaft Transmitter Partenaire en France M MANNE A Sensortelemetrie FGP Sensors & Instrumentation - ZI - 24 rue des Dames - 78340 LES CLAYES SOUS BOIS Tél. : 01 30 79 65 40 - Fax. : 01
More informationHANDWHEEL ASSEMBLY UPGRADE
HANDWHEEL ASSEMBLY UPGRADE PURPOSE The purpose of the notice is to document the procedures involved in removing old handwheel assembly parts and replacing them with new parts. The new parts allow the handwheel
More informationv1.0 ASSEMBLY GUIDE Josie Sideboard Small
v1.0 ASSEMBLY GUIDE Josie Sideboard Small Components Upon unpacking your sideboard from it s delivery box, you should have the separate pieces shown below. Follow the steps on the next pages to assemble
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE ULTIMATE COUPLIN FROM 0.05 10 Nm BACKLASH FREE MINIATURE BELLOWS COUPLINS Areas of application: Ideal for precise transmission
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: O-Ring Groove Cutter Adjustable Tool Block Upgrade Page 1 of 5 Prototype Kit Contents: 1x Adjustable Tool Block 1x Adjustable Tool Holder 1x Graduated Adjusting Screw 1x 1/8 Registration
More informationTRT 135 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TRT 135 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES MODELLO MODEL 105 Rev. 01 26/08/2014
More informationTRT 110 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TRT 110 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES MODELLO MODEL 096-097 Rev. 01 26/08/2014
More informationInstallation Instructions
Installation Instructions For 4 foot / 1.2m Diameter Ultra-high Performance Antenna Model ADxxG-4-T2 Before Installation, please read the instructions carefully. This instruction guide covers the installation
More informationPWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical
More informationMEC II
MEC II 3500-4500 - 6000-7500 9000-11000 - 13500 Technical catalogue Catalogo tecnico Technischer Katalog rev.0-15//25 Predisposition for overpressure Predisposizione per valvola di sovrapressione Vorbereitung
More informationOTTO ARC TABLE OF CONTENTS INTRODUCTION PIPE SYSTEMS CONTACT US! ARC-PS (Pipe System) ARC-3R (Pressing Roller Pipe Welding System)
OTTO ARC INTRODUCTION Otto Arc Systems, Inc., formerly Otto Tool, has been in business for over 27 yrs. We have provided Beveling and Facing Equipment since the day we opened our doors and have been expanding
More informationBRUSHLESS DC geared motors
0 Watts with Ø 6 mm planetary gearbox Concentric output shaft Ideal for high reduction ratios Ideal for high torque applications High efficiency Reversible Output speed Available torque stage stages stages
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationIRM 2500 Rotation plate for oval rings (operating manual)
IRM 2500 Rotation plate for oval rings (operating manual) Laban-Produkttechnik Table of contents Table of contents 1 Introduction / information for the user... 3 1.1 Purpose of this operating manual...
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Canopen
Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: CAN - Protocol: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable
More informationAE SERIES ACTUATORS. Electric Actuators. Standard Voltages 110/240/380/480V 24VAC/24VDC. Modulating Capable. 100% Duty Cycle Models Fast Acting Models
AE SERIES ACTUATORS Electric Actuators Standard Voltages 110/240/380/480V 24/24VDC Modulating Capable 100% Duty Cycle Models Fast Acting Models Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366
More informationOptical encoder MEC22 HR
Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square
More informationTRT 60 Swing DECESPUGLIATORE TRINCIATUTTO OSCILLANTE PER PENDENZE SWINGING BRUSH-CUTTER FORESTRY MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TRT 60 Swing DECESPUGLIATORE TRINCIATUTTO OSCILLANTE PER PENDENZE SWINGING BRUSH-CUTTER FORESTRY MOWER FOR SLOPING SURFACES MODELLO MODEL 014-024-034-044-054 T5016 2382B
More informationSistema di connessione LED Chip Array / LED Chip array connection system
Sistema di connessione LED Chip Array / LED Chip array connection system Cod. 034170 CONNETTORE LED BRIDGELUX ES ARRAY 25,8X22,8MM BIANCO Dimensioni chip array Chip array dimension Materiale corpo Body
More informationClinch Tooling Catalog
Clinch Tooling Catalog Combining rotation resistance with leak-proof characteristics > PUNCH TOOLING > DIE TOOLING > INSTALLATION HARDWARE & COMPONENTS > DIE MOUNTING INFORMATION Learn more about this
More informationPIZZA ROLLER DOUGH ROLLER MACHINE MODELS SF SF320 - SF400 - SF500
Spare Parts PIZZA ROLLER DOUGH ROLLER MACHINE MODELS SF 250 - SF320 - SF400 - SF500 1 1. SPARE PARTS 1 1.1 ORDERING SPARE PARTS WHEN ORDERING ANY SPARE PARTS ALWAYS SPECIFY THE FOLLOWING: - NAME OF THE
More informationOrbital welding systems and accessories for high-purity process piping
ORBIWELD TP Open orbital weld heads The ORBIWELD TP series offers outstanding features in terms of design and functionality: An extremely compact design has been achieved thanks to the drive motor that
More information2200 Series End Drive Conveyors
00 Series End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866 TEL: 6-67-7600 Hartland, WI 509-000
More informationTechnology that inspires PRODUCT RANGE. Mechanics Software Electronics. Excerpt of the WEISS Product Range
Technology that inspires PRODUCT RANGE Mechanics Software Electronics Excerpt of the WEISS Product Range CUSTOMER SPECIFIC SOLUTIONS The WEISS range at a glance 4 I would like to commission my installation
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
More informationCompass 20 Fluid Head
Cat No: 1036 Serial No: C31219 - Miller Camera Support Equipment ACN 000 923 464 30 Hotham Parade Artarmon, Sydney, NSW 2064 Australia Tel. +61 2 9439 6377 Fax +61 2 9438 2819 millertripods.com sales@miller.com.au
More informationAppendix for QTD1864 Installation of Analog Position Sensor ML312345
PHDinEurope GmbH 2015 Appendix for QTD1864 Read the instructions before beginning any work! PHDinEurope GmbH Zum Carl-Alexander-Park 6 52499 Baesweiler, GERMANY Telephone: +49 (0) 2401 619 77 0 Fax: +49
More informationTSR 110 TRINCIASARMENTI PROFESSIONALE PROFESSIONAL SWINGING FLAIL MOWER
CATALOGO RICAMBI PARTS CATALOGUE TSR 110 TRINCIASARMENTI PROFESSIONALE PROFESSIONAL SWINGING FLAIL MOWER MODELLO MODEL 111-112 Rev. 01 27/08/2014 60514 TSR 110 2343 13136 2302 2410/10 2410/10 2408/05
More informationLEA_IT_PND Direct and Inverted Pendulum. Instruments and Systems for Geotechnical and Structural Monitoring
LEA_IT_PND1001000 Direct and Inverted Pendulum LEA_IT_PND1001000 Direct and Inverted Pendulum Description _ Direct and inverted pendulums are generally used to measure rotations and translations of large
More informationAirflex Product Line PDC Installation, Operation and Maintenance of PDC Assemblies
Airflex Product Line PDC 16300 Installation, Operation and Maintenance of PDC Assemblies 204268 Table of contents Section Description Page 1.0 Introduction 4-5 1.1 Description 5 1.2 How it works 5 2.0
More informationModules. Sigma Tool Change System. Users Guide & Preventative Maintenance and Replacement Procedures
Sigma Tool Change System 3.1 5.1 Modules Users Guide & Preventative Maintenance and Replacement Procedures GUIDE : 95000_english Rev 11 648 Saratoga Road Glenville, NY 12302 USA Phone: 518 384 1000 Fax
More informationInstallation and Operational Instructions for ROBA -DS couplings. _ (disk pack HF) Sizes
. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting in
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 2928 mm Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More information9.07 KINEMATICS KIT USERS MANUAL
9.07 KINEMATICS KIT USERS MANUAL INCLUDED PARTS LIST Standard parts - 1. ground plane enclosure which includes stepper motor with control circuits, press fit motor shaft adaptor, and link attachment plate.
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationCatalogue Fixture Components
Catalogue 2009 Fixture Components Catalogue Fixture components -Terms of deliverance: EXW Incoterms, Olofström -Minimum order value: 200 -Period of validity: until next Catalogue is edited -All dimensions
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationMast R Lift II. User Manual Model # for INCRA METRIC Mast-R-Lift II
Mast R Lift II User Manual Model #02123 for INCRA METRIC Mast-R-Lift II 61 Forest Plain Road, Oro-Medonte, Ontario, L3V 0R4 Canada 866-272-7492 Toll Free 705-726-8233 Local Phone 705-327-0295 Fax Email:
More informationWiring ducts Easily allows for organization, pulling and separation of cables
Easily allows for organization, pulling and separation of cables 2 Catalogue Wiring ducts I ABB Index Halogen free wiring ducts with vertical slots 4 Thermoplastic wiring ducts with vertical slots Flexible
More informationDrilling machine for use on branch saddles fused. Instructions for assembly and use
Drilling machine for use on branch saddles fused Instructions for assembly and use DRILLING MACHINE FOR USE ON BRANCH SADDLES FUSED ON POLYETHYLENE PIPELINES FOR PRESSURE AND NON-PRESSURE USE Ø 90 1000
More informationCPT SS-MI TABLE OF CONTENTS. Pass Thru Brochure Pass Thru Drawing. Pgs. 2-3 Pg. 4
CPT3648-54-SS-MI TABLE OF CONTENTS 1) 2) 3) Pass Thru Brochure Pass Thru Drawing Installation & Parts List Latch Info Spring Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pg. 6 Pgs. 7-8 Pg.
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationVERTICAL MACHINING CENTER
MCH-630 MCV-7 VERTICAL MACHINING CENTER MCV-A MCV-60 MCV-BA MCV-10 MCV-1250 MCV-1450 MCV-1700 MCV- No. 3, Kung-Yeh Lane, Fengcheng Road, Nanshih Village, MCV-2600 Wufeng District, Taichung City, 41357,
More informationCollet Mandrels 15. Registered trade mark of RINGSPANN GmbH, Bad Homburg
Mandrels 1 RINGSPANN Registered trade mark of RINGSPANN GmbH, Bad Homburg Flange Mandrels Advantages High concentricity up to 0,01 Rapid changeover to other clamping diameters Pull-back action during clamping;
More informationHampshire Buffet Cabinet with Glass Doors
Thanks for shopping with Improvements! Hampshire Buffet Cabinet with Glass Doors Item #55919 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationReferencing 0,0 position
Page 1 of 11 TITLE: SABRE X-Axis Lead Screw Replacement Procedure Gerber FastFact #: 2013 Supplied by: Gerber Hardware Support Last Modified: March 1, 2011 Summary: The following procedure explains how
More informationENGINEERING STANDARDS SECTION: D TOG-L-LOC V-LOC OVAL-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works
Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining
More informationRotary actuators Rotary wing drives Series RAK. Brochure
rochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationTSR 110 Swing TRINCIASARMENTI PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FLAIL MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TSR 110 Swing TRINCIASARMENTI PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FLAIL MOWER FOR SLOPING SURFACES MODELLO MODEL 098-099 Rev. 01 26/08/2014 T8022
More informationMC 110 Swing TRINCIASARMENTI PROFESSIONALE A ROTORE VERTICALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING VERTICAL FLAIL MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE MC 110 Swing TRINCIASARMENTI PROFESSIONALE A ROTORE VERTICALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING VERTICAL FLAIL MOWER FOR SLOPING SURFACES MODELLO MODEL 108-109
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationMFG 316 Chapter 4 //Workholding Principles
Workholding Principles All devices that grip, hold, chuck, or retain a workpiece in order to perform a manufacturing operation. Force=hydraulic, pneumatic, electrical, mechanical Force multiplication by
More informationAssembly instructions for cable termination frame (2-5 bays)
Assembly instructions for cable termination frame 60131 (2-5 bays) 1.General The cable termination frames are concepted for erection in dry indoor rooms. They serve for the insulated accommodation of:
More informationAngular Grippers- Cam Driven Series
RA SERIES Angular Grippers- Cam Driven Series. General Purpose: This style gripper is widely used in the industry and is a rugged design that supplies very high grip force for its size. Cost Effective:
More information