Fractional CO2 Laser. Scanxel - Round ROUND SCANNER. Medsun co., ltd.

Transcription

1 Fractional CO2 Laser Scanxel - Round ROUND SCANNER Medsun co., ltd.

2 Specification Laser type Sealed-off CO₂ Ultra Fine Pulse Frequency 5~250 Hz (UFP-CW, Adj. step) Power to Tissue 1-30W Ultra Fine Pulse Duration 50~1800 μs (Adjustable step) Beam Mode TEM00 Control Microprocessor Control Wave Length 10.6μm User Modes User Memory Key(restore mode) User1(1~8 keys),user2(9~16 keys) Aiming Beam Operating Modes 1 mw Red LD (Adjustable beam density) CW(Cont.Wave) UFP(Ultra Fine Pulse) Exposure Modes CW(Continuous Wave) -Continuous -Single : 0.01~1 Sec (Adjustable) -Repeat : 0.01~1 Sec (Adjustable) UFP(Ultra Fine Pulse ) - Continuous - Single : 0.01~1 Sec (Adjustable) - Repeat : 0.01~1 Sec(Adjustable) LCD Display Electronic Cooling System Articulated Arm Dimensions Weight 128 X 64Dot Graphic Display 220/240 VAC/50/60 Hz /600VA Water cooling with sealed closed circuit 7 joints 348(W) X 398(D) X 1050(H) 31 kg (with Arm)

3 ROUND SCANNER SCANNER COMPOSITION ZOOM FOCUS 0,2,4,6,8 Adjustment

4 ROUND SCANNER SCANNER TIP Stamp7 Holes Tip Scanner Tip

5 ROUND SCANNER SCANNER

6 ROUND SCANNER ZOOM 8mm 6mm UNFOCUS 4mm 2mm 0mm FOCUS LASER BEAM DEFOCUS

7 Ultra CO2 Laser Medsun co., ltd.

8 Specification Laser type Power to Tissue Beam Mode Wave Length Aiming Beam Operating Modes Exposure Modes Sealed-off CO₂ 1-30W TEM μm 1mW Red LD(Adjustable beam density) CW(Cont. Wave),UFP(Ultra Fine Pulse) Continuous : Continuous Single : 0.01~1 Sec(on time Adjustable) Repeat : 0.01~1 Sec(on/off time Adjustable) * CW - Continuous, CW - Single, CW - Repeat UFP - Continuous, UFP - Single, UFP - Repeat

9 CO2 Laser (Lasun25-Dentalas) Scanxel System Specification Ultra Fine Pulse Frequency Ultra Fine Pulse Duration Control User Modes LCD Display Electronic Requirements Cooling System Articulated Arm Dimensions Weight Optionals 5~250 Hz (FP-CW, Adj. step) 50~800 μs (Adjustable step) Microprocessor Control User Memory Key(restore mode) User1(1~8Keys), User2(9~16Keys) 128 X 64Dot Graphic Display 220/240 VAC / 50/60 Hz / 600VA Water cooling with sealed closed circuit 7 joints W348 X D398 X H kg (with ARM) Red Guide Beam

10 CO2 Laser (Lasun25-Dentalas) Operation modes CW-CONTINUOUS P-av S CW-SINGLE CW-REPEAT S EXP Ontime S Exp Offtime FOOT S/W OFF

11 CO2 Laser (Lasun25-Dentalas) Operation modes CW (CONTINUOUS WAVE) - CW-CONT : In This Continuous Mode, The laser beam is emitted for as long as the foot-switch is pressed. In this case, adjustable in 1W - 30W. - CW-SINGLE : This means that the machine is set to emit the laser beam in single mode. Although the foot-switch is pressed. The machine only works for preset duration in Exposure On time. - CW-REPEAT : This Mode makes the machine deliver the laser beam in the REPEAT Mode. In the repeat mode, the laser beam is delivered intermittently as a series of bursts for a preset duration, determined by the Exp_on time and Exp_off Time values, for as long as the foot-switch is pressed.

12 CO2 Laser (Lasun25-Dentalas) Operation modes ULTRA FINE PULSE-CONTINUOUS : POWER(Watt) P-peak P-av On-time μs Adjustable Off-time=T On-time FOOT S/W OFF TIME(Sec) Cycle time T = 1 / f f = min 5Hz, max frequency 250Hz

13 CO2 Laser (Lasun25-Dentalas) Operation modes FP (FINE PULS WAVE) - FP-CONT : By making one pulse with peak-power, on time ( μs ) Pulse width can be adjusted, and off time is controlled by frequency value. The machine makes the one FINE PULSE and deliver the laser beam according to the preset Frequency value. Frequency value can be adjusted in the ranges of 5-250Hz. But Watt can't be. Generating Power is controlled by adjusting on time duration. This mode is designed to enable the machine to generate more densely and minutely split laser of a pulse width. Thermal damage to surrounding tissue is reduced with Shorter laser activation durations, Where by the adjacent healthy Tissue has more time to cool between pulses. This pulse is called Fine Pulse and is very useful to reduce the pain and scar.

14 CO2 Laser (Lasun25-Dentalas) Operation modes ULTRA FINE PULSE-SINGLE : UFP-SINGLE : In this mode the machine emits the pulse which is made according to preset Exp_ontime value. At this time it's not able to control generating Power and ontime( μs ) value and Exp_ontime for intensity. POWER(Watt) P-peak P-av Sec Exposure on-time FOOT S/W OFF

15 CO2 Laser (Lasun25-Dentalas) Operation modes FP (FINE PULS WAVE) - FP-REPEAT : In FP-Repeat, the machine performs FP-Single pulse operation which is determined by the Exposure time value fixed as EXP_ON/OFF. The laser beam is delivered intermittently as a series of bursts for as long as the Foot-switch is pressed. POWER(Watt) P-peak P-av Sec Sec FOOT S/W OFF Exposure on-time Exposure off-time (frequency adjust not available of exposure on-time)

16 THANK YOU Medsun co., ltd.