Preliminary Specification
|
|
- Frederick Webster
- 5 years ago
- Views:
Transcription
1 Preliminary Specification CONTENTS 1.1 SCOPE OPTICAL SPECIFICATION BEAM DELIVERY FIBER SPECIFICATION ALIGNMENT LASER POWER DISTRIBUTION WATER COOLING REQUIREMENTS CONTROL PHYSICAL ENVIRONMENT COMPLIANCE 5 Page 1 of 5
2 1.1 Scope 2kW OEM Modules comprising an optical engine, based on SPI Lasers GTWave active fiber technology, pump diodes with drivers, and control and monitoring electronics to provide logic and analogue interfaces for laser integrators, all mounted on a water cooled base plate Applicable Product Code Families SP-2000-M-W-xxx 1.2 Optical Specification Laser Power 2000W At the output connector Efficiency 33% Typical SOL, DC to optical Wavelength 1075nm ±2nm Polarisation Laser Bandwidth Random <10nm Thermal Focus Shift 0.5 Z R / kw (Rayleigh length per kw) At the output connector Pulse Duration 10µs - CW Rise Time <5µs 10% to 90% Fall Time <6µs 90% to 10% Pulse Frequency 50kHz Maximum frequency for zero interpulse power Output Power Range 10%-105% Normal operation. Relative to specified output power Low Power Mode 30W - 300W Needs separate control mode activated Warm Up Time <10mins To reach specified power stability from cold Short Term Power Stability (1Hz 1MHz) Long Term Power Stability (1 Sec 10 Hours) Laser Life Expectancy <2.0% RMS ±2.0% peak After warm up time, under constant coolant conditions. At specified output power After warm up time, under constant coolant conditions. At specified output power SPI s fiber lasers are designed using active and passive components including active and passive fibers. The optical characteristics of the passive components do not age appreciably over time or with use, nor do the characteristics of the active fibers. The life expectancy of the fiber laser is therefore set by its other active components, and primarily by the pump diodes. The design lifetime for the pump diodes (an ensemble of fiber coupled laser diodes) is typically 100,000 hours MTBF. This MTBF is not until catastrophic failure, but to the time at which the current required to maintain output power exceeds a design limit. The quoted MTBF is for the ensemble of all individual laser diodes. For individual laser diodes, the MTBF is considerably longer, of the order of 1,000,000 hours, but it is the ensemble MTBF that is important when considering the product lifetime. Page 2 of 5
3 1.3 Beam Delivery Fiber Specification Output Fiber 20µm 50µm Beam Quality, BPP, (mm.mrad) Beam Divergence 86% power enclosed Beam Divergence 99.5% power enclosed Output Fiber Length Option 100µm enhanced 100µm PIPA-Q Output Connector M ± As defined ISO mrad 170mrad 130mrad 180mrad Full angle at specified power <140mrad <280mrad <240mrad <280mrad Full angle at specified power 5m 5m, 10m, 15m 5m, 10m, 15m, 20m Conduit may have occasional blemishes of purely cosmetic nature 1.4 Alignment Laser Power 1mW (max) Class 2 Fitted as std Wavelength Red ( nm) Supply Voltage 24V +/-10% 1.5 Power Distribution Voltage Power Connection Type Frequency 48V nominal (51V max. at specified output power) Bus Bars Output Load Regulation Max. 0.5% DC 10% to 90% load variation Output Line Regulation Max. 0.5% ±10% input variation Output Ripple & Noise Hold Up Time Transient Response Stability Max. 0.5%, 20Mhz measurement bandwidth. At full load, nominal input voltage. Power supply to be able to energise 4,000µF of load capacitance under direct on-line load power application (cold start). Min. 5ms. At full load, nominal input voltage. Max. 0.5% Example: The input current can change from 0A to 135A in less than 5µs. If the PSU cannot respond fast enough additional measures will be required to ensure that the output power is maintained over the first few milliseconds Max. 0.5% Over time and temperature Max Current 180A At EOL for specified Power Consumption) 8.0kW output at design lifetime Auxiliary Power Supply 2A, 24V DC ±5% Page 3 of 5
4 1.6 Water Cooling Requirements Cooling Capacity 6000W Heat Load to be removed at EOL for specified output Coolant Temperature C Non condensing Coolant Max Pressure Coolant Min Differential Pressure Coolant Connection Diameter 6.0 Bar 2.5 Bar 10mm Coolant Flow Rate 20l/min Total, through both pipes Coolant Materials Compatibility External Water Specification Appearance Minimum Copper & Plastic Clear & without sediment Maximum Particle size - 100μm Hardness (mg CaCO 3 per litre) Electrical conductivity at 25 C - 300mg/l 22μScm μScm -1 ph DI Water NOT to be used Drinkable tap water is likely to meet these requirements, and water meeting the requirements of VDI3803. additives for prevention of corrosion, scaling and microbial growth are available commercially, for example from NALCO and Optishield, and may be used if the manufacturer s instructions are followed 1.7 Control Customer Interface Serial RS-232, CANBus Parallel Digital (5V, 24V) and Analog (0-10V) signals CAN bus uses proprietary protocol Supply 24V PLC Compatible GUI 1.9 Physical PrismView GUI standard. FiberView GUI if FVCU option is purchased FVCU FiberView Control Unit Parameter Width Depth Height Weight Value 19 Rack mount (445mm) 702mm 2U (88mm) 38kg Page 4 of 5
5 1.10 Environment Parameter Value IP Rating Range of ambient temperature Range of ambient humidity Max operating altitude Storage IP52 (excluding Power Input / Control Interface which is IP50) 5-45 C 5-85% RH 35 C Max Dew Point 2500m 0 70 C 0-95% RH Storage Drain coolant below 2 C 1.11 Compliance Legal For legal compliance the PRISM component shall comply with the following European Union (EU) directives: EU Directive Harmonised Standard Notes 2011/65/EU 2012/19/EU EN 50581:2012 RoHS Directive Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances WEEE Directive For legal compliance PRISM component shall comply with the following United States (US) Regulations: US Regulation Note Title 21, Chapter I, Subchapter J, Rule (a)(3) FDA - Product listing regulation Page 5 of 5
200W 500W, Air Cooled QUBE Fiber Lasers
Technical Specification 200W 500W, Air Cooled QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 4 1.5 POWER DISTRIBUTION 4 1.6
More informationQ-SWITCHED LASERS. Engineered Reliability. Rugged Design. No Water. Applications. Features
Q-SWITCHED LASERS nanio nanio air* air* Industrial DPSS Industrial DPSS Lasers Lasers Engineered Reliability. Rugged Design. No Water. The NANIO AIR lasers are a family of Q-switched DPSS lasers engineered
More informationContinuous-Wave (CW) Single-Frequency IR Laser. NPRO 125/126 Series
Continuous-Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series www.lumentum.com Data Sheet The Lumentum NPRO 125/126 diode-pumped lasers produce continuous-wave (CW), singlefrequency output at either
More informationCOMPACT Diode Laser System (Water-Cooled)
COMPACT Diode Laser System (Water-Cooled) Easy-to-integrate CW system consists of a compact 19 (11HU including water-air-chiller), rack-mountable chassis and metal-armored fiber. Can be combined with DILAS
More informationOBIS CellX. The Universal Light Engine FEATURES
OBIS CellX The Universal Light Engine OBIS CellX is a multi-wavelength platform for use as the laser excitation Light Engine in applications requiring or laser wavelengths from a single module. CellX delivers
More informationOBIS CORE LS. Next Generation Miniaturized OEM Laser Module FEATURES
OBIS CORE LS Next Generation Miniaturized OEM Laser Module The Coherent OBIS CORE LS suite of products provide miniaturized building blocks for OEM instruments designers. Consisting out of the Optically
More informationiflex-iris Laser Systems Product features include:
PSM1035 issue 3 iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for
More informationFireFly Green. It is a self-contained laser that offers the user increased stability over a wide operating temperature and with a faster warm up time.
FireFly Green FireFly Green The FireFly Green range sets a new standard for industrial grade, green laser diode modules. A radically new design provides TE stabilised performance without TE cost and power
More informationCUBE. Diode Laser System FEATURES
CUBE Diode Laser System The Coherent CUBE laser is a compact all-in-one laser system. CUBE lasers offer wavelengths from 75 nm to 70 nm with output power as high as 00 mw. Based on laser diode technologies
More informationGenesis CX STM-Series
Coherent s unique Optically Pumped Semiconductor Laser (OPSL) technology powers the Genesis CX-STM Series, providing up to 250 mw of UV laser light or up to 10W of visible laser light from either OEM or
More informationContinuous Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series
COMMERCIAL LASERS Continuous Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series Key Features 1319 or 1064 nm outputs available Fiber-coupled output Proven nonplanar ring oscillator (NPRO) design Superior
More informationSapphire FP. Fiber Pigtailed Lasers from Deep Blue to Orange FEATURES
Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange Sapphire FP is a series of true fiber-pigtailed lasers based on Coherent s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL
More informationAtlantic. series. Industrial High Power Picosecond DPSS Lasers
Atlantic series Industrial High Power Picosecond DPSS Lasers Laser description Laser micromachining is rapidly becoming the material processing technology of choice for numerous small scale, real world
More informationThink of LASER as a tool
Mini DPSS Lasers Mini DPSS Lasers Think of LASER as a tool Mini DPSS Mini DPSS Lasers Lasers Versatility. Flexibility. Reliability. The mosquitoo and mosquitoo X series of mini DPSS lasers are designed
More informationLaser Systems. !!!! iflex-iris
iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for integration into
More informationiflex-iris Fiber coupled laser systems Product features include:
PSM1041 issue 2 iflex-iris Fiber coupled laser systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally
More informationignis TECHNICAL DATA SHEET high specification red laser CW 660nm laser Extremely low noise Power 500mW
CW 660nm laser Extremely low noise Power 500mW TECHNICAL DATA SHEET The high specification 660nm laser Overview The at 660nm and 500mW is among the most powerful and compact red lasers available today
More informationHighLight FL Series. High Power Fiber Lasers with Fiber-Fiber-Coupler FEATURES & BENEFITS
FL Series High Power Fiber Lasers with Fiber-Fiber-Coupler The TM FL lasers are high brightness, high power fiber lasers offering 500 up to 6,000 Watts with Fiber-Fiber- Coupler (FFC) for materials processing.
More informationgem TECHNICAL DATA SHEET CW 532nm laser Extremely low noise Power from 50mW - 750mW 532nm high spec OEM laser
gem CW 532nm laser Extremely low noise Power from 50mW - 750mW TECHNICAL DATA SHEET gem The high specification CW 532nm laser Overview The gem is the jewel in the Laser Quantum collection. Its small and
More informationIntegrated Diode Laser System DioPower
Integrated Diode Laser System DioPower PC with LETSoft program DioPower Integrated Components Applications Laser Diode from 15 to 120W Material processing Laser Diode driver up to 6V / 100A Laser soldering
More informationSKS B2 120 GD 69/11 - MA PB
SKS B2 12 GD 69/11 - MA PB Absolute maximum ratings 1) Symbol Conditions Values Unit I OUT MAX Maximum permanent output current 1 2 A RMS I IN MAX Maximum permanent input current 1 8 A DC V OUT MAX Maximum
More informationNavigator I J40-X15SC OEM Laser System 1064nm, 532nm, 355nm, and 266nm
Navigator I J40-X15SC OEM Laser System 1064nm, 532nm, 355nm, and 266nm The Navigator I X15SC laser system is an advanced diode pumped solid state laser system. Its Q-switched output characteristics have
More informationSKS B2 120 GDD 69/11 - A11 MA PB
Absolute maximum ratings 1) Symbol Conditions Values Unit I IN/OUT MAX Maximum permanent input/output current 1 2 A RMS V IN/OUT MAX Maximum output voltage 76 V AC V BUS MAX Maximum DC Bus voltage 1 2
More informationCUBE. Diode Laser System FEATURES & BENEFITS
Diode Laser System The Coherent laser is a compact all-in-one laser system. lasers offer wavelengths from 375 nm to 730 nm with output power as high as 100 mw. Based on laser diode technologies the laser
More informationSKS C 120 GDD 69/11 A3A MA B1C
SKS C 12 GDD 69/11 A3A MA B1C Absolute maximum ratings 1) Symbol Conditions Values Unit I IN MAX Maximum permanent input current (4Q only) 1 2 A RMS I OUT MAX Maximum permanent output current 2 4 A RMS
More information6000 W, 2450 MHz Microwave Generator GMP 60K SM 56T400 FST 3 IR
6000 W, 2450 MHz Microwave Generator GMP 60K SM 56T400 FST 3 IR Power supply It is based upon the latest switch mode power supply technology, offering size reduction (smallest 6 kw available on the market,
More informationSingle Frequency Laser/Single Longitudinal Mode Laser
Single Frequency Laser/Single Longitudinal Mode Laser MSL series lasers with the characteristics of ultra compact, long lifetime, low cost and easy operating, which are used in DNA sequencing, flow cytometry,
More informationSKS C 240 GDD 69/11 A6A MA B1C
Absolute maximum ratings Symbol Conditions Values Unit I IN MAX Maximum permanent input current 2 4 A RMS I OUT MAX Maximum permanent output current 2 4 A RMS V IN MAX Maximum input voltage 76 V AC VOUT
More informationFIBER EVO. Miniaturized laser module complete with controller and USB power supply all within an incredibly small package
Miniaturized laser module complete with controller and USB power supply all within an incredibly small package KEY FEATURES: Incredibly small yet fully featured Output powers up to 75 mw Powered by USB:
More informationUser-selectable output bus voltages for optimized voltage/current matching to load requirements.
Three Axis Gradient Amplifier 3-Axis 700A Precision Gradient Amplifier System 1500 VDC (OEM adjustable down to 800V) 100% Digital D-SERIES Technology Hi-Speed, Single Fiber-Optic Digital Command Universal
More informationLRS-0532-PF SERIES INFORMATION SHEET
216-5 ADRIAN AVE. TORONTO, ON, CANADA M6N5G4 T. 1.416.729.7976 F. 1.480.247.4864 SALES@LASERGLOW.COM LRS-0532-PF SERIES INFORMATION SHEET The LRS-0532 Series of Diode-Pumped Solid-State (DPSS) Lasers are
More informationPRODUCT SPECIFICATIONS Optical Laser Engine 2000W. PRODUCT SPECIFICATIONS Optical Laser Engine OLE_D 2000W Rev nm fiber laser engine
Page 1 of 10 PRODUCT SPECIFICATIONS OLE_D Rev. 01 1080nm fiber laser engine Product code selector - Available options O L E D 2 _ Power and pump input ports options. See section 1.0 Termination options.
More informationBLM 40W & 60W. Preliminary Data Sheet. at 79xnm & 8xxnm, 27% & 30% Fill Factor High Power Laser Diode Bar on Long passive Cu Mini-cooler.
BLM 40W & 60W at 79xnm & 8xxnm, 27% & 30% Fill Factor High Power Laser Diode Bar on Long passive Cu Mini-cooler Features: The II-VI Laser Enterprise BLM 40W and 60W laser diode Bar on Long passive Mini-cooler
More informationLasers for Life Sciences
Lasers for Life Sciences 2015 Laser Overview Superior Reliability & Performance Lasers for Life Sciences Overview of Laser Applications Flow Cytometry MPE Imaging Medical Diagnostics Applications: Flow
More informationLASER BEAM COLLIMATOR FOR FIBER AND DIRECT DIODE LASERS
0 FOR FIBER AND DIRECT DIODE LASERS 1 GENERAL INFORMATION 2017 OPI Photonics S.R.L. All rights reserved. OPI Photonics S.R.L. reserves the right to make changes to this document at any time without prior
More informationPRODUCT SPECIFICATIONS Optical Laser Engine 500W and 1000W. PRODUCT SPECIFICATIONS Optical Laser Engine OLE_D 500W and 1000W Rev.
Page 1 of 10 PRODUCT SPECIFICATIONS OLE_D Rev. 01 1080nm fiber laser engine Product code selector - Available options O L E D Power and pump input ports options. See section 1.0 Termination options. See
More informationSapphire LP. CW Visible Lasers from Deep Blue to Orange. Superior Reliability & Performance. Sapphire LP Features:
Sapphire LP Features: Sapphire LP is a series of compact CW visible lasers based on Coherent s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL technology not only provides established
More informationTruHeat HF Series 1000 / 3000 / When it comes to process heat, don t compromise.
TruHeat HF Series 1000 / 3000 / 5000 When it comes to process heat, don t compromise. TRUMPF Hüttinger perfection, even to the smallest of work-pieces. Automatic power compensation and you re still in
More informationAtlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Power Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W
More informationDatasheet (Preliminary) Modular Inverter System VARIS Datasheet VARIS
Datasheet (Preliminary) Modular Inverter System VARIS -06-12 Individual circuit arrangement or forced air cooled 60µF capacitance per module Optical or electrical signal transmission Current and temperature
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationThis series of lasers are available with a choice of Nd:YAG, Nd:YLF, and Nd:YVO 4. System Reliability
Photonics Industries DS Series of UV (351/355 nm) diode pumped solid-state Q-switched lasers offer a compact, hands-free system with the long-term reliability that the manufacturing industry demands. Utilizing
More informationA Global Laser Brand. FireFly Mini
A Global Laser Brand FireFly Mini FireFly Mini Green The new FireFly Mini green range sets a new standard for small industrial grade, green laser diode modules. A radical new design provides TE stabilised
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationMG MW S-Band Magnetron
MG8076 7.5 MW S-Band Magnetron This data should be read in conjunction with the Magnetron Preamble. ABRIDGED DATA Peak power output...7.5 MW Centre frequency...2998 MHz Magnet...integral magnet or separate
More information1995 Metric CSJ SPECIAL SPECIFICATION ITEM Multimode Video Fiber Optic Transmission Equipment
1995 Metric CSJ 3483-01-010 SPECIAL SPECIFICATION ITEM 6329 Multimode Video Fiber Optic Transmission Equipment 1.0 Description. This Item shall govern for the furnishing and installation of Video Fiber
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More informationLXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationNLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
More informationGreen Laser Diode in TO56 Package Version 0.2 PLT5 520B. ATTENTION Observe Precautions For Handling Electrostatic Sensitive Device
2007-05-23 Green Laser Diode in TO56 Package Version 0.2 Features Optical output power (continuous wave): 80 mw (T case = 25 C) Typical emission wavelength: 520 nm Efficient radiation source for cw and
More informationREDUNDANT DC 200W POWER SUPPLY. Technical Specifications TD-DC-200W-12V
REDUNDANT DC 200W Technical Specifications Model Number : Efficiency : >92% Minimum Maximum DC Input Voltage -36V -72V Maximum Output Power 200W Output Minimum Maximum Load Load 12V 0A 16.7A 5V - - 3.3V
More informationHigh Power and Energy Femtosecond Lasers
High Power and Energy Femtosecond Lasers PHAROS is a single-unit integrated femtosecond laser system combining millijoule pulse energies and high average powers. PHAROS features a mechanical and optical
More informationGreen Laser Diode in TO38 ICut Package Version 1.1 PL 520. ATTENTION Observe Precautions For Handling Electrostatic Sensitive Device
Green Laser Diode in TO38 ICut Package Version 1.1 PL 520 Features Optical output power (continuous wave): 30 / 50 mw (T case = 25 C) Typical emission wavelength: 515 / 520 nm Efficient radiation source
More informationFeatures. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationPEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
More informationNotes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
More informationNotes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
More informationConduction-Cooled Bar Packages (CCPs), nm
Conduction-Cooled Bar Packages (CCPs), 780-830 nm High Power Single-Bar Packages for Pumping and Direct-Diode Applications Based on Coherent s legendary Aluminum-free Active Area (AAA ) epitaxy, Coherent
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationFeatures. Applications. Optional Features
Features Compact, Rugged Design TEM Beam with M 2 < 1.2 Pulse Rates from Single Shot to 15 khz IR, Green, UV, and Deep UV Wavelengths Available RS232 Computer Control Patented Harmonic Generation Technology
More informationProduct Specification sheet
INPUT MINIMUM RATED MAXIMUM Input Voltage 90V AC 100 240V AC 264V AC Input Frequency 47 Hz 50 / 60 Hz 63 Hz Input Current * 350mA Inrush Current **
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationSHARKY 775 ULTRASONIC COMPACT METER. 4 Approved according EN 1434 and MID in class 2 with dynamic range of 1:250 (qi:qp) in class 2
APPLICATION ultrasonic compact energy meter can be used for measuring the energy consumption in heating / cooling application for billing purposes. The measurement principle is static and based on the
More informationAcculase Green PWM. Direct Drive Green Laser Diode Module
Acculase Green PWM Direct Drive Green Laser Diode Module Acculase Direct Drive Green Available in 520nm wavelength and with powers output powers up to 35mW the Acculase Direct Drive Green PWM represents
More informationSFD550-12BG Front-End Preliminary Data Sheet DC Input, 12V Output, 550 Watts
Applications Datacom Distributed power systems Server Features RoHS compliant for all six substances NEBS Level 3 compliant: GR-63, 78, 089 Wide DC input range (-40 to -75 VDC) U or 2U height configurations
More informationHighLight FL Compact. High Power Multi Mode Fiber Laser FEATURES & BENEFITS
FL Compact High Power Multi Mode Fiber Laser The TM FL Multi Mode lasers are compact high power fiber lasers offering 500 up to 6,000 Watts, with up to 2.5kW output power generated from just one fiber
More informationPackaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationDM Dual Head Green Series
DM Dual Head Green Series DM20/30/40-527-DH DM50/60-527-DH DM100-527-DH DM60-532-DH DM100-532-DH DM150-532-DH DM200-532-DH PI offers any of its DM Series lasers in a Dual Head (DH) option. This option,
More informationDiode Collimator Assembly Datasheet
Diode Collimator Assembly Datasheet Diode Collimator Assembly Global Laser s DCA (Diode Collimator Assembly) provides a low cost high quality OEM solution to manufactures looking for a compact assembly
More informationTentative. Rectifier Module VARIS R-400-H. Tentative VARIS -R
Tentative Rectifier Module VARIS R-400-H Half-controlled thyristor/diode- rectifier module Fully compatible to the Variable Inverter System VARIS or forced air cooling available 2740-8000µF capacitance
More informationAdd suffix /W/X3 for wired version with both analogue and PWM dimming controls (six wires) (a)
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature
More informationGreen Laser Diode in TO38 ICut Package Version 0.2
2007-05-23 Green Laser Diode in TO38 ICut Package Features Optical output power (continuous wave): 80 mw ( = 25 C) Typical emission wavelength: 520 nm Efficient radiation source for cw and pulsed operation
More informationDatasheet. Modular Inverter System VARIS Datasheet VARIS
Datasheet Modular Inverter System VARIS -10-17 Individual circuit arrangement Water or forced air cooled 2740µF capacitance per module Optical or electrical signal transmission Current and temperature
More informationdirectly on each side of the crystal to form a rugged, monolithic oscillator that is end pumped by a CW diode laser.
Product Bulletin MicroChip NanoPulse, NanoGreen, and NanoEyeSafe CDRH Solid-State Lasers The JDS Uniphase MicroChip NanoLaser produces high peak power, high repetition rates, and short pulses from compact,
More informationExternal RF Driver. Electrical Driver for AOTF-crystal. Instruction Manual
External RF Driver Electrical Driver for AOTF-crystal Instruction Manual Table of Contents 1 General... 3 2 Compliance... 3 3 Labeling... 4 4 Interface... 5 4.1 Front Panel... 5 4.2 Back Panel... 6 4.2.1
More informationIndustrial PSU with universal input voltage range ( VAC line to line) and configurable output voltage. North America
World-Wide 3-phase Input Voltage Range (nom. 200 Vrms to 480 Vrms), PF > 0.94 High Power Density 16 W/in 3 94% Typical Efficiency Parallel Operation up to 16 Units (50.4 kw) Cold-Plate Cooling System -25
More informationEnergy Meters for DIN Rail Mounting Electric energy meter WS0101, WS0102,WS1102 WS0301, WS0302,WS1302
Energy Meters for DIN Rail Mounting Electric energy meter WS0101, WS0102,WS1102 WS0301, WS0302,WS1302 Direct connection up to 65 A (WSx10x) Connection with current transformer (WSx30x) Industrial or meters
More informationVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective Approved By A 11/11/13 Specification Release S. Sadot A1 14/01/14 Update ope
Electrical Specification for: Compact PCI - 6U - AC - 700W Telkoor Part Number: 900-7802-0000 SCALE RELEASE DATE 11/11/13 SHEET 1 OF 7 VISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
More informationS-band Magnetron. Tuner revolutions to cover frequency range 4.75 (note 3) Mounting position (note 4) Any Cooling (note 5) Water
S-band Magnetron GENERAL DESCRIPTION is a mechanical tuned pulsed type S-band magnetron intended primarily for linear accelerator. It is water cooled and has circle waveguide output type. It is designed
More informationSKS B2 140 GD 69/12 U - MA PB
SKS B2 14 GD 69/12 U - MA PB Absolute maximum ratings 1) Symbol Conditions Values Unit I OUT MAX Maximum permanent output current 1 4 A RMS I IN MAX Maximum permanent input current 1 8 A DC V OUT MAX Maximum
More informationAtlantic. Industrial High Power Picosecond Lasers. features
Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 6 W output power at
More informationUL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
More information1.25 Gbps Bi-Directional single fiber SFF transceiver
1.25 Gbps Bi-Directional single fiber SFF transceiver 1310nm TX FP / 1550nm Rx TIA Features Data rates up 1.25Gbps Industry standard 2x5 SFF MSA footprint Integrated WDM filter for dual TX/RX operation
More informationMachine Vision Lyte-MV 2
Machine Vision Lyte-MV 2 The Lyte-MV 2 Range The Lyte-MV 2 provides a reliable industrial light source for a wide range of machine vision applications including triangulation, 3D inspection and alignment.
More informationFLEXPOINT Machine Vision Lasers MVmicro Series
FLEXPOINT Machine Vision Lasers MVmicro Series The FLEXPOINT MVmicro series was developed for stand alone machine vision applications, primarily in use together with industrial cameras in 3D measuements.
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationHITEK POWER OLH10K SERIES
10KW HIGH VOLTAGE POWER SUPPLIES The HiTek Power OLH10K Series is a range of high reliability single output high voltage power supplies designed to meet the rigorous requirements of ion and electron beam
More informationPOWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
More informationSintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore Tel: Fax:
Sintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore 658079 Tel: +65 63167112 Fax: +65 63167113 High-power Nd:YAG Self-floating Laser Cutting Head We supply the laser
More informationAtlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W output
More informationVarilite Datasheet. Thread Mountable Laser Diode Module
Varilite Datasheet Thread Mountable Laser Diode Module Varilite The Varilite range combines all the features of Global Lasers Premier range with the addition of a threaded barrel to simplify mounting and
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationRAY COMPACT ENERGY METER MECHANICAL
APPLICATION Fully electronic compact heat meter or compact cooling and heat meter with impeller scanning for recording energy and volume data. Highly accurate recording of all billing data in a heating
More informationSeries AMLD-IZ Up to 2000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Up to 2mA LED Driver High Power LED Driver Constant Output Current Wide (7:1) Input Voltage Range High Efficiency (Up to 96%) Remote Control
More informationHigh-Power Femtosecond Lasers
High-Power Femtosecond Lasers PHAROS is a single-unit integrated femtosecond laser system combining millijoule pulse energies and high average power. PHAROS features a mechanical and optical design optimized
More informationAC/DC Power Supply Series APPLICATION NOTE
ZMS100 AC/DC Power Supply Series APPLICATION NOTE ZMS100 Application Notes Issue 3 Document Number 260160 Page 1 of 15 Contents Contents... 2 1. INPUT... 3 AC INPUT LINE REQUIREMENTS... 3 2. DC OUTPUT...
More information