LaserBeam ProfilingSolutions. IRLaserBeam Profiler

Transcription

1 LaserBeam ProfilingSolutions IRLaserBeam Profiler

2 TABLE OF CONTENTS PRODUCT DESCRIPTION LASERDEC CL200 TECHNICAL DATA DIMENSIONS LASERDEC CL500 TECHNICAL DATA DIMENSIONS LASERDEC CR200 TECHNICAL DATA DIMENSIONS ACCESSORIES ATTENUATION UNIT 0 ATTENUATION UNIT 90 BEAM REDUCER IR MICROSCOPE OBJECTIVE BEAM PROFILING SOFTWARE RAYCI

3 LaserDec CL/CR - Product Description - The high performance LaserDec system is based on industry s unique imaging technique. It is designed for monitoring high-power IR-lasers in best performance. Thanks to its high resolution and its incomparable real-time capabilities, this highly efficient beam profiler is optimized for laser beam analysis of continuous wave (cw) and pulsed laser systems. The LaserDec system ensures beam profiling: By high frame rates and high resolution Without optical components in the beam path Without scanning techniques, fluorescent materials or toxic fumes through acrylic mode burns. Spectral response: µm Effective pixel size: ~45µm - ~124µm Resolution: 320 x 240pixel / 640 x 480pixel Technologie: Image Converter Data output: 14Bit Interface: FireWire 1394b / GigE LaserDec CL The LaserDec CL is optimized to provide excellent sensitivity from 8µm-12µm spectral range. This model provides unique beam analysis capabilities for CO 2-Laser wavelengths. LaserDec CR The LaserDec CR is optimized to provide excellent sensitivity from 1.5µm-8µm spectral range. The wide application spectrum ranges from high-power telecom lasers to medical lasers. The plug & play design and the ultra-fast FireWire 1394b / GigE interface facilitate easy and flexible integration and operation. The portable LaserDec is designed to be used in a variety of applications in industry, science, R&D, including: Laser beam analysis of high-power IR lasers Quick control of laser modes and adjustment errors Test equipment for scientific research Near-Field and Far-Field analyses of lasers.

4 LaserDec CL200 - Technical Data - CL200 CL200 HP CL200 HP - HS Standard High Performance High Sensitivity IMAGE CONVERTER Spectral sensitivity: 8µm - 12µm 8µm - 12µm 8µm - 12µm Clear aperture: =20mm =20mm =20mm Beam diameter (1/e 2 ): 1mm - 10mm 1mm - 10mm 1mm - 10mm Intensity range: 10W/cm W/cm 2 20W/cm W/cm 2 1W/cm 2-100W/cm 2 Input power (max): 200W 200W 50W With attenuation unit 0 : up to 2kW up to 2kW up to 1kW With attenuation unit 90 : up to 2.5kW up to 2.5kW up to 1.5kW Effective pixel size*: ~90µm ~45µm ~ 45µm CAMERA FEATURES Sensor: CCD CCD CCD Resolution*: 320 x 240pixel 640 x 480pixel 640 x 480pixel Bit depth (output): 14 Bit 14 Bit 14 Bit Frame rate: up to 20Hz up to 20Hz up to 20Hz Interface: FireWire 1394b / GigE FireWire 1394b / GigE FireWire 1394b / GigE Mode: cw or pulsed cw or pulsed cw or pulsed SPECIFICATIONS Mechanical dimensions (W x H x L): 298mm x 141mm x 76mm 298mm x 141mm x 76mm 298mm x 141mm x 76mm Weight: 2.6kg 2.6kg 2.7kg Electrical requirements: AC120V/240V; 48-63Hz; 285W AC120V/240V; 48-63Hz; 285W AC120V/240V; 48-63Hz; 285W Storage temperature**: 0 C +60 C 0 C +60 C 0 C +60 C Operating temperature**: +5 C +35 C +5 C +35 C +5 C +35 C Humidity: 20%...80% 20%...80% 20%...80% Regulations: CE, RoHS CE, RoHS CE, RoHS * Different parameters on request ** Without condensation Design and specification of the described product(s) are subject to change without notice.

5 LaserDec CL200 - Dimensions -

6 LaserDec CL500 - Technical Data - CL500 CL500 HP CL500 HP - HS Standard High Performance High Sensitivity IMAGE CONVERTER Spectral sensitivity: 8µm - 12µm 8µm - 12µm 8µm - 12µm Clear aperture: =30mm =30mm =30mm Beam diameter (1/e 2 ): 1mm - 15mm 1mm - 15mm 1mm - 15mm Intensity range: 10W/cm W/cm 2 20W/cm W/cm 2 1W/cm 2-100W/cm 2 Input power (max): 450W 450W 100W With attenuation unit 0 : up to 2kW up to 2kW up to 1kW With attenuation unit 90 : up to 3kW up to 3kW up to 1.5kW Effective pixel size*: ~124µm ~62.5µm ~62.5µm CAMERA FEATURES Sensor: CCD CCD CCD Resolution*: 320 x 240pixel 640 x 480pixel 640 x 480pixel Bit depth (output): 14 Bit 14 Bit 14 Bit Frame rate: up to 20Hz up to 20Hz up to 20Hz Interface: FireWire 1394b / GigE FireWire 1394b / GigE FireWire 1394b / GigE Mode: cw or pulsed cw or pulsed cw or pulsed SPECIFICATIONS Mechanical dimensions (W x H x L): 340mm x 165mm x 92mm 340mm x 165mm x 92mm 340mm x 165mm x 92mm Weight: 3.3kg 3.4kg 3.5kg Electrical requirements: AC120V/240V; 48-63Hz; 570W AC120V/240V; 48-63Hz; 570W AC120V/240V; 48-63Hz; 320W Storage temperature**: 0 C +60 C 0 C +60 C 0 C +60 C Operating temperature**: +5 C +35 C +5 C +35 C +5 C +35 C Humidity: 20%...80% 20%...80% 20%...80% Regulations: CE, RoHS CE, RoHS CE, RoHS * Different parameters on request ** Without condensation Design and specification of the described product(s) are subject to change without notice.

7 LaserDec CL500 - Dimensions -

8 LaserDec CR200 - Technical Data - CR200 CR200 HP Standard High Performance IMAGE CONVERTER Spectral sensitivity: 1.5µm - 8µm 1.5µm - 8µm Clear aperture: =20mm =20mm Beam diameter (1/e 2 ): 1mm - 10mm 1mm - 10mm Intensity range: 10W/cm W/cm 2 15W/cm W/cm 2 Input power (max): 150W 150W Effective pixel size*: ~90µm ~45µm CAMERA FEATURES Sensor: CCD CCD Resolution*: 320 x 240pixel 640 x 480pixel Bit depth (output): 14 Bit 14 Bit Frame rate: up to 20Hz up to 20Hz Interface: FireWire 1394b / GigE FireWire 1394b / GigE Mode: cw or pulsed cw or pulsed SPECIFICATIONS Mechanical dimensions (W x H x L): 298mm x 141mm x 76mm 298mm x 141mm x 76mm Weight: 2.6kg 2.8kg Electrical requirements: AC120V/240V; 48-63Hz; 285W AC120V/240V; 48-63Hz; 285W Storage temperature**: 0 C +60 C 0 C +60 C Operating temperature**: +5 C +35 C +5 C +35 C Humidity: 20%...80% 20%...80% Regulations: CE, RoHS CE, RoHS * Different parameters on request ** Without condensation Design and specification of the described product(s) are subject to change without notice.

9 LaserDec CR200 - Dimensions -

10 Attenuation Unit 0 - Technical Data - The attenuation unit is based on a zinc selenide (ZnSe) beam slitter and can be mounted in four positions on the LaserDec aperture. It is designed for a 10 angle of incidence and can be used up to intensities of 4kW/cm². The absorbed heat is dissipated by cooling water whereby thermal lens effects are eliminated. The water-cooling allows the utilization of lasers up to powers of 2kW. To avoid interference patterns the beam splitter is designed as wedge angle. AU-05-0 AU-10-0 AU-15-0 AU-20-0 Spectral range * : 10.6µm 10.6µm 10.6µm 10.6µm Transmission rates * : T=5% T=10% T=15% T=20% Angle of incidence: Aperture: =25mm =25mm =25mm =25mm Beam diameter (1/e 2 ) LaserDec CL200: max. 10mm max. 10mm max. 10mm max. 10mm Beam diameter (1/e 2 ) LaserDec CL500: max. 15mm max. 15mm max. 15mm max. 15mm Wedge angle: 6-10min 6-10min 6-10min 6-10min Surface: S1=plan - 95%R S2=plan - AR S1=plan - 90%R S2=plan - AR S1=plan - 85%R S2=plan - AR S1=plan - 80%R S2=plan - AR Intensity (Imax): 4kW/cm 2 4kW/cm 2 4kW/cm 2 4kW/cm 2 Power (Pmax) LaserDec CL200: 2kW 2kW 1.5kW 1kW Power (Pmax) LaserDec CL500: 2kW 2kW 2kW 2kW Water-cooling: 2l/min / 2bar 2l/min / 2bar 2l/min / 2bar 2l/min / 2bar Hose diameter: OD=8mm OD=8mm OD=8mm OD=8mm * Different parameters on request Design and specification of the described product(s) are subject to change without notice.

11 Attenuation Unit 90 - Technical Data - The attenuation unit is based on a zinc selenide (ZnSe) beam slitter and can be mounted in four positions on the LaserDec aperture. It is designed for a 45 angle of incidence and can be used up to intensities of 5kW/cm². The absorbed heat is dissipated by cooling water whereby thermal lens effects are eliminated. The water-cooling allows the utilization of lasers up to powers of 3kW. To avoid interference patterns the beam splitter is designed as wedge angle. AU-SP-90 AU AU Spectral range * : 10.6µm 10.6µm 10.6µm Polarization: Polarization-dependent Polarization-independent Polarization-independent Reflection rates: RS=28% / RP=7.8% R=33.3% R=50% Angle of incidence: Aperture: =26mm =26mm =26mm Beam diameter (1/e 2 ) LaserDec CL200: max. 10mm max. 10mm max. 10mm Beam diameter (1/e 2 ) LaserDec CL500: max. 15mm max. 15mm max. 15mm Wedge angle: min 6-10min Surface: S1=plan - uncoated S2=plan - AR S1=plan %R S2=plan - AR S1=plan - 50%R S2=plan - AR Intensity (Imax): 5kW/cm 2 3kW/cm 2 3kW/cm 2 Power (Pmax) LaserDec CL200: 700W (RS) / 2.5kW (RP) 600W 400W Power (Pmax) LaserDec CL500: 1.7kW (RS) / 3kW (RP) 1.5kW 1kW Water-cooling: 2l/min / 2bar 2l/min / 2bar 2l/min / 2bar Hose diameter: OD=8mm OD=8mm OD=8mm * Different parameters on request Design and specification of the described product(s) are subject to change without notice.

12 Beam Reducer - Technical Data - The beam reducers are based on zinc selenide (ZnSe) lens elements with adjustable lens spacing. The large input aperture allows beam profiling of lasers with diameters up to 40mm with CINOGY s LaserDec systems. A high transmission rate >97% and a low wavefront distortion <1/4 Wave ensure beam reducing without loss. The beam reducers can be used up to intensities of 20kW/cm² for pulse wave and 1kW/cm² for continuous wave. They have one positive input lens and one negative output lens (Galilean telescope). BR-25-2x BR-50-2x BR-50-5x BR-75-5x Spectral range * : 10.6µm 10.6µm 10.6µm 10.6µm Ratio: 2x 2x 5x 5x Large aperture: 25mm 50mm 50mm 75mm Beam diameter (1/e²): max. 13mm max. 26mm max. 26mm max. 40mm Intensity (Imax) CL200: 1kW/cm 2-400W/cm 2 400W/cm 2 Intensity (Imax) CL500: - 1kW/cm 2 400W/cm 2 400W/cm 2 Coating damage threshold: 100MW/cm 2 100MW/cm 2 100MW/cm 2 100MW/cm 2 Dimensions (O.D. x L): 38.1mm x 83mm 69.9mm x 147mm 69.9mm x 147mm 85.7mm x 230mm * Different parameters on request Design and specification of the described product(s) are subject to change without notice.

13 Microscope Objective - Technical Data - The IR objective is an add-on to the standard LaserDec CL Beam Profiler. It is based on zinc selenide (ZnSe) and can be mounted on the LaserDec aperture. This special designed objective is optimized for focus spot measurements in the range of 100µm - 500µm up to 100W (cw) laser power. The focal plane is imaged with 35x magnification to the effective area of the LaserDec CL Beam Profiler. OB-IR-01 Spectral range * : 10.6µm Magnification: 35x Numerical aperture: 0.23 Focus size: CL200 series Focus size: CL500 series Resolution: <10µm Power (Pmax): <100W (depending on focus spot size) * Different parameters on request Design and specification of the described product(s) are subject to change without notice.

14 LASER BEAM PROFILER SOFTWARE Beam Profiler Software RayCi - Product Description - CINOGY Technologies beam profilers are available with the specifically designed analysis software, RayCi, which supports XP / Vista / Windows 7 / 8 operating systems. It is available as 32 Bit / 64 Bit version and can control several beam profiler cameras on a single computer simultaneously. XP / Vista / Windows 7 / 8 Pentium IV / AMD Processor (Dual / Quad Core) 512MB graphic, Open GL V1.4 (NVIDIA) 2GB RAM 500MB free memory PCI / PCIe slot USB ports CD / DVD-ROM drive Internet access for update request Due to its clearly designed menu structure, RayCi shows self-explanatory functions, which help the user to access quickly standard settings. Incomparable visualization modes, extensive analytical capabilities as well as new developed correction algorithms ensure the highest accuracy in laser beam analysis. A wide range of beam width techniques e.g. 2 nd Moment, Knife Edge, Moving Slit, Plateau and Gauss-Fit can be applied to determine quick and reliable standard beam parameters. The unique measurement tool enables the continuous monitoring of beam parameters, beam position and power density distribution. Moreover a new beam quality M 2 tool enables accurate beam quality analysis. The extraordinary graphical and analytical tool of RayCi can be used for live data (LiveMode) and stored data (SaveMode) simultaneously, while each mode has its own individual functions. This makes RayCi the most advanced analysis software on the market. Helpful features like AOI Tracking, AOI Optimization, Zoom Functions, Look-Up Tables, etc. simplify the laser beam analysis. RayCi is equipped with flexible data and image output capabilities. This permits the user to store data and images in the format that is compatible with their needs. A clearly arranged and printable protocol view displays the measurement parameters as well as the most important laser beam analysis results. CINOGY S laser beam profiler can easily be integrated in different automation systems and processes. The supplied Software Development Kit (SDK) based on a XML-rpc interface. The user can write programs in a number of platforms, such as Python, Visual Basic, LabVIEW, etc. which will remote-control the beam profiler.