OBIS CellX. The Universal Light Engine FEATURES
|
|
- Warren Watts
- 6 years ago
- Views:
Transcription
1 OBIS CellX The Universal Light Engine OBIS CellX is a multi-wavelength platform for use as the laser excitation Light Engine in applications requiring or laser wavelengths from a single module. CellX delivers up to four wavelengths from a single, compact module that includes user-adjustable steering and telescopes used to optimize the beams to your target requirements. For example, CellX can be aligned to give flexible patterns of focused stripes in a flow cytometer. Using the same optical Cores that are at the heart of Coherent s OBIS suite of lasers, CellX delivers best-in-class optical performance and reliability. By consolidating control, thermal management and packaging, CellX reduces complexity encountered when integrating multiple separate lasers. The savings that come from deleting redundant elements is reinvested into features to benefit your application. FEATURES Up to wavelengths OBIS Performance Common power, control and I/O interfaces User-adjustable beam steering and telescopes APPLICATIONS Flow Cytometry Microscopy Medical Imaging Optogenetics CellX has a single electrical interface for ease of installation. Each laser wavelength can be individually controlled via RS- or USB computer interface, or via analog and digital control lines. With its low cost, alignment flexibility and ease-of-integration, CellX is the universal laser Light Engine for your application.
2 OPTICAL SPECIFICATIONS Wavelength (nm) Output Power (mw) Part Number n/a n/a Spatial Mode TEM 00 M (Beam Quality). Beam Asymmetry Beam Diameter at /e (mm) Beam Divergence (mrad, full angle) 0. Pointing Stability Over Temperature (µrad/ C) <0 :. Beam Colinearity (µrad) <00 RMS Noise 5 (%) (0 Hz to 0 MHz) <0.5 Peak-to-Peak Noise 5 (%) (0 Hz to 0 khz) < Long-term Power Stability (%) (8 hours, ± C) < Warm-up Time 6 (minutes) (from cold start) <5 Polarization Extinction Ratio >50: >75: >50: >50: Polarization Azimuth Vertical ±5 CONTROL SPECIFICATIONS Interface for Computer Control Laser Drive Modes (Four Operating Modes, individually selected for each wavelength thru USB or RS-) Digital Modulation USB (mini-b) and RS- (from DB7, 500 Baud) ) CW with Power Control via USB/RS- ) Analog Modulation ) Digital Modulation ) Mixed Analog and Digital Modulation (simultaneous Analog and Digital) Connection on DB7 Interface Pin Pin Pin Pin 7 Voltage and Impedance 0-.V 7, kohm input impedance each, Normally Low (off) Maximum Bandwidth (khz) 50 Rise Time (0% to 90%) (µsec) <5 Fall Time (90% to 0%) (µsec) <5 Modulation Depth (extinction ratio) Power Range Analog Modulation Infinite Modulate from 0% to Set Power (USB or RS-) in Digital Mode Connection on DB7 Interface Pin Pin Pin 6 Pin 6 Voltage and Impedance 0 to 5V, kohm input impedance each, Normally Low (off) Maximum Bandwidth, db (khz) 50 Rise Time (0% to 90%) (µsec) <5 Fall Time (90% to 0%) (µsec) <5 Modulation Depth (extinction ratio) >50: >50: >50: >50: Power Range Modulate from 0% to 0% with 0 to 5V in Analog Mode Laser-to-laser center wavelength tolerance: 05 nm ±5 nm. 88 nm and 56 nm with ± nm, 60 nm with 6 to 6 nm range. Short pass filter suppression of out-of-band emission for 60 nm. Output power is measured at the output window of CellX. Power is variable in CW Mode from 5% (05 nm and 60 nm) to 0% of rated power. Output power is variable in CW Mode from 0 mw (88 nm and 56 nm) to 0% of rated power. Specifications are valid for 00% power. For 88 nm and 56 nm any residual laser emission at 808 nm fundamental is <0. mw. Beam Quality (M ) measured per laser channel using ModeMaster with 90/0 clip levels. Standard alignment. User adjustable 5 RMS Noise and Peak-to-Peak Noise Specifications are per laser channel, during CW operation. 6 Typical power-on delay of minute from cold start. 7 Digital input is 5V tolerant.
3 MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS MECHANICAL SPECIFICATIONS OBIS CellX Dimensions (mm) (L x D x H) 55 x 80 x 5. Beam Position from Reference (mm) <0.5 Beam Angle (mrad) <5 Laser Safety Classification ESD Protection Baseplate Operating Temperature ( C) 0 to 5 Heat Dissipation of Laser Head (Watts) Typical 0, Maximum 60 Ambient Temperature ( C) 0 to 5 Non-Operating Condition ( C) -0 to +60 Shock Tolerance (6 ms) Weight (kg). ELECTRICAL SPECIFICATIONS Power Input Connector Supply Voltage (V DC) EN66- (8 kv Air Discharge, kv Contact Discharge) 0g Use Molex for Power Cable Connector, Pins,, for Power, Pins,5,6 for Ground ± (00 Watt minimum) Power Consumption (W) Typical 0, Maximum 60 See mechanical drawing. OEM Product - does not comply with CDRH CFR 00.0 and 00. without appropriate integration. Typically 85% of heat load through the base plate. See Users Manual for more detail. Non-Condensing. See User Manual for more detail. OBIS CellX 0.0 mm (0.9 in.).0 mm (0.6 in.) 8.7 mm (7.7 in.) 80.0 mm (7.09 in.) 60.0 mm (6.0 in.) X Ø.8 mm (0.9 in.) Thru All Mounting Holes for M or #8 Socket Head Cap Screws 7.0 mm (5.79 in.) Top View 55.0 mm (6.0 in.) X screws to remove lid to access beam adjustments X -0 UNC.8 mm (0.9 in.) Tapped Holes for Optional Objective or Accessory Mounting Ø 5.6 mm (.0 in.) Front View Status Indicator USB Laser Control I/O DB7 Power Recepticle Interlock Indicator.8 mm (.77 in.) 5. mm (.06 in.) 5. mm (.00 in.).8 mm (.5 in.) Laser Aperture Ø 0. mm (0.0 in.) Rear View
4 OBIS CellX Objective Lens Accessories Datasheet 5 OPTICAL PERFORMANCE OBIS CellX Objective Lens Accessories SPECIFICATIONS OL0-VIS OL5-VIS Part Number Wavelength Range (nm) 00 to 700 Beam Profile at Focus (Vertical, Horizontal) Gaussian, Gaussian Focus Spot Size Vertical (µm) (/e ) 0 ± 5 ± Focus Side-lobes Vertical (% of peak) <0 Focus Spot Size Horizontal (µm) (/e ) Adjustable from 60 ±5 to 80 ±0 Adjustable from 90 ±0 to 0 ±0 Working Distance (mm) Dimensions (mm) x x 56 x x 7.7 Vertical Adjustment, (µm) ±50 Horizontal Adjustment, (µm) ±50 Focus Adjustment 5 Independent focus adjustment of all wavelengths Measured at location of best vertical focus. System aligned to lower limit on delivery. Horizontal beam size can be adjusted up to the upper limit. Pre-alignment to a wider horizontal waist is available. Measured from mechanical surface (output end) of the objective assembly - see drawing. Measured from nominal beam axis. Adjustment using tilt/yaw adjustment internal to CellX, while meeting all optical specifications. Assumes the objective assembly mounted within less than 00 mm (optical path length) from the output face of CellX. Adjustment using telescope adjustment internal to CellX, while meeting all optical specifications. NOMINAL OPTICAL PERFORMANCE Nominal optical performance through focus OL0-VIS Nominal optical performance through focus OL5-VIS Beam Diameter (µm) Working Distance (mm) 05 X 88 X 56 X 67 X 05 Y 88 Y 56 Y 67 Y Beam Diameter (µm) Working Distance (mm) 05 X 88 X 56 X 67 X 05 Y 88 Y 56 Y 67 Y Flow cytometry example: four laser focus with separated positions - user adjustable
5 PART NUMBER LASER 8680 CellX Laser x50 mw 05, 88, 67 nm 868 CellX Laser x50 mw 05, 88, 56, 67 nm 868 CellX Laser x00 mw 05, 88, 67 nm 868 CellX Laser x00 mw 05, 88, 56, 67 nm PART NUMBER ACCESSORY 5 CellX System x00 mw 05, 88, 56, 67 nm Developers Kit 0 Accessory Kit for CellX (Alignment Tools, Interlock Plug, USB Cable, Coherent Connection, User Manual) 985 Accessory, Objective Lens, OL0-VIS 0 µm Focus, CellX 986 Accessory, Objective Lens, OL0-VIS 5 µm Focus, CellX 96 Accessory, Mount, Front Aperture Objective Holder, CellX 96 Accessory, Translation Stage with Mount for Objective Lens, CellX 85 Heatsink, Fan-Cooled with Stage Platform Extension, CellX 5 Heatsink, OEM, CellX 999 Accessory, Control Board, Adjustable Power, CellX 9865 Accessory, Control Board, Key-Switch, RS-, Digital/Analog SMB, CellX 60 Accessory, Interlock Plug, DB7, CellX 597 Accessory, Control Board, Analog Modulation Inputs, RS- Coherent, Inc., 500 Patrick Henry Drive Santa Clara, CA 9505 p. (800) (08) f. (08) tech.sales@coherent.com Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent s scientific and industrial lasers are certified to comply with the Federal Regulations ( CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August, 976. Coherent offers a limited warranty for all OBIS CELLX lasers. For full details of this warranty coverage, please refer to the Service section at or contact your local Sales or Service Representative. Printed in the U.S.A. MC-xxx-7-0M07 Copyright 07 Coherent, Inc.
CUBE. Diode Laser System FEATURES & BENEFITS
Diode Laser System The Coherent laser is a compact all-in-one laser system. lasers offer wavelengths from 375 nm to 730 nm with output power as high as 100 mw. Based on laser diode technologies the laser
More informationCUBE. Diode Laser System FEATURES
CUBE Diode Laser System The Coherent CUBE laser is a compact all-in-one laser system. CUBE lasers offer wavelengths from 75 nm to 70 nm with output power as high as 00 mw. Based on laser diode technologies
More informationOBIS CORE LS. Next Generation Miniaturized OEM Laser Module FEATURES
OBIS CORE LS Next Generation Miniaturized OEM Laser Module The Coherent OBIS CORE LS suite of products provide miniaturized building blocks for OEM instruments designers. Consisting out of the Optically
More informationGenesis CX STM-Series
Coherent s unique Optically Pumped Semiconductor Laser (OPSL) technology powers the Genesis CX-STM Series, providing up to 250 mw of UV laser light or up to 10W of visible laser light from either OEM or
More informationLasers for Life Sciences
Lasers for Life Sciences 2015 Laser Overview Superior Reliability & Performance Lasers for Life Sciences Overview of Laser Applications Flow Cytometry MPE Imaging Medical Diagnostics Applications: Flow
More informationSapphire LP. CW Visible Lasers from Deep Blue to Orange. Superior Reliability & Performance. Sapphire LP Features:
Sapphire LP Features: Sapphire LP is a series of compact CW visible lasers based on Coherent s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL technology not only provides established
More informationSapphire FP. Fiber Pigtailed Lasers from Deep Blue to Orange FEATURES
Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange Sapphire FP is a series of true fiber-pigtailed lasers based on Coherent s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL
More informationCoherent PowerLine. High-Power Structured Light Pattern Generating Laser FEATURES
Coherent PowerLine High-Power Structured Light Pattern Generating Laser Coherent s PowerLine structured light laser is a line generator developed for demanding industrial machine vision and scientific
More informationCoherent StingRay. Structured Light Pattern Generating Laser. Superior Reliability & Performance. Coherent StingRay Features: 450 nm to 830 nm
Coherent StingRay Features: In today s world of expanding 3D vision systems, the camera and laser are equal partners in the accuracy, stability and repeatability of the measurements made and used by these
More informationConduction-Cooled Bar Packages (CCPs), nm
Conduction-Cooled Bar Packages (CCPs), 780-830 nm High Power Single-Bar Packages for Pumping and Direct-Diode Applications Based on Coherent s legendary Aluminum-free Active Area (AAA ) epitaxy, Coherent
More informationiflex-iris Laser Systems Product features include:
PSM1035 issue 3 iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for
More informationContinuous-Wave (CW) Single-Frequency IR Laser. NPRO 125/126 Series
Continuous-Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series www.lumentum.com Data Sheet The Lumentum NPRO 125/126 diode-pumped lasers produce continuous-wave (CW), singlefrequency output at either
More informationVitara. Automated, Hands-Free Ultrashort Pulse Ti:Sapphire Oscillator Family. Superior Reliability & Performance
Vitara Automated for hands-free, reliable operation Computer controlled bandwidth Computer tunable center wavelength PowerTrack active optimization 3 fs pulsewidth capability Low noise Integrated
More informationPowerMax-Pro Sensors. 100 mw to 150W FEATURES
PowerMax-Pro Sensors PowerMax-Pro (Patent #9,012,848) represents a dramatic technological advancement in laser power sensing that combines the broad wavelength sensitivity, dynamic range and laser damage
More informationMira OPO-X. Fully Automated IR/Visible OPO for femtosecond and picosecond Ti:Sapphire Lasers. Superior Reliability & Performance. Mira OPO-X Features:
Fully Automated IR/Visible OPO for femtosecond and picosecond Ti:Sapphire Lasers Mira OPO-X is a synchronously pumped, widely tunable, optical parametric oscillator (OPO) accessory that dramatically extends
More informationVitara. Automated, Hands-Free Ultrashort Pulse Ti:Sapphire Oscillator Family. Superior Reliability & Performance. Vitara Features:
Automated, Hands-Free Ultrashort Pulse Ti:Sapphire Oscillator Family Vitara is the new industry standard for hands-free, integrated, ultra-broadband, flexible ultrafast lasers. Representing the culmination
More informationContinuous Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series
COMMERCIAL LASERS Continuous Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series Key Features 1319 or 1064 nm outputs available Fiber-coupled output Proven nonplanar ring oscillator (NPRO) design Superior
More informationF6 Series Diode Lasers 6-Pin Fiber-Coupled Single-Stripe CW Devices
Coherent Diode Lasers Single-Stripe F6 Series Diode Lasers 6-Pin Fiber-Coupled Single-Stripe CW Devices Coherent s high-power, fiber-coupled, single-stripe diode lasers offer the simplest and easiest means
More informationLaser Systems. !!!! iflex-iris
iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for integration into
More informationiflex-iris Fiber coupled laser systems Product features include:
PSM1041 issue 2 iflex-iris Fiber coupled laser systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally
More informationFireFly Green. It is a self-contained laser that offers the user increased stability over a wide operating temperature and with a faster warm up time.
FireFly Green FireFly Green The FireFly Green range sets a new standard for industrial grade, green laser diode modules. A radically new design provides TE stabilised performance without TE cost and power
More informationHighLight FL Series. High Power Fiber Lasers with Fiber-Fiber-Coupler FEATURES & BENEFITS
FL Series High Power Fiber Lasers with Fiber-Fiber-Coupler The TM FL lasers are high brightness, high power fiber lasers offering 500 up to 6,000 Watts with Fiber-Fiber- Coupler (FFC) for materials processing.
More informationFIBER EVO. Miniaturized laser module complete with controller and USB power supply all within an incredibly small package
Miniaturized laser module complete with controller and USB power supply all within an incredibly small package KEY FEATURES: Incredibly small yet fully featured Output powers up to 75 mw Powered by USB:
More informationQ-SWITCHED LASERS. Engineered Reliability. Rugged Design. No Water. Applications. Features
Q-SWITCHED LASERS nanio nanio air* air* Industrial DPSS Industrial DPSS Lasers Lasers Engineered Reliability. Rugged Design. No Water. The NANIO AIR lasers are a family of Q-switched DPSS lasers engineered
More informationCoherent Laser Measurement and Control Beam Diagnostics
Coherent Laser Measurement and Control M 2 Propagation Analyzer Measurement and display of CW laser divergence, M 2 (or k) and astigmatism sizes 0.2 mm to 25 mm Wavelengths from 220 nm to 15 µm Determination
More informationTunable Laser. PZT Cavity Tuning
Coherent Specialty CO 2 Laser Tunable Laser GEM Select 100 Specialty CO 2 Waveguide Laser The GEM Select 100 Advantage The GEM Select 100 Specialty laser brings fieldproven technology for both laboratory
More informationHighLight FL Compact. High Power Multi Mode Fiber Laser FEATURES & BENEFITS
FL Compact High Power Multi Mode Fiber Laser The TM FL Multi Mode lasers are compact high power fiber lasers offering 500 up to 6,000 Watts, with up to 2.5kW output power generated from just one fiber
More informationdirectly on each side of the crystal to form a rugged, monolithic oscillator that is end pumped by a CW diode laser.
Product Bulletin MicroChip NanoPulse, NanoGreen, and NanoEyeSafe CDRH Solid-State Lasers The JDS Uniphase MicroChip NanoLaser produces high peak power, high repetition rates, and short pulses from compact,
More informationThink of LASER as a tool
Mini DPSS Lasers Mini DPSS Lasers Think of LASER as a tool Mini DPSS Mini DPSS Lasers Lasers Versatility. Flexibility. Reliability. The mosquitoo and mosquitoo X series of mini DPSS lasers are designed
More informationThis series of lasers are available with a choice of Nd:YAG, Nd:YLF, and Nd:YVO 4. System Reliability
Photonics Industries DS Series of UV (351/355 nm) diode pumped solid-state Q-switched lasers offer a compact, hands-free system with the long-term reliability that the manufacturing industry demands. Utilizing
More informationPreliminary Specification
Preliminary Specification CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 3 1.5 POWER DISTRIBUTION 3 1.6 WATER COOLING REQUIREMENTS 4 1.7 CONTROL
More informationNavigator I J40-X15SC OEM Laser System 1064nm, 532nm, 355nm, and 266nm
Navigator I J40-X15SC OEM Laser System 1064nm, 532nm, 355nm, and 266nm The Navigator I X15SC laser system is an advanced diode pumped solid state laser system. Its Q-switched output characteristics have
More informationPower. Warranty. 30 <1.5 <3% Near TEM ~4.0 one year. 50 <1.5 <5% Near TEM ~4.0 one year
DL CW Blue Violet Laser, 405nm 405 nm Operating longitudinal mode Several Applications: DNA Sequencing Spectrum analysis Optical Instrument Flow Cytometry Interference Measurements Laser lighting show
More informationVarilite Datasheet. Thread Mountable Laser Diode Module
Varilite Datasheet Thread Mountable Laser Diode Module Varilite The Varilite range combines all the features of Global Lasers Premier range with the addition of a threaded barrel to simplify mounting and
More informationgem TECHNICAL DATA SHEET CW 532nm laser Extremely low noise Power from 50mW - 750mW 532nm high spec OEM laser
gem CW 532nm laser Extremely low noise Power from 50mW - 750mW TECHNICAL DATA SHEET gem The high specification CW 532nm laser Overview The gem is the jewel in the Laser Quantum collection. Its small and
More informationOperating longitudinal mode Several Polarization ratio > 100:1. Power. Warranty. 30 <1.5 <5% Near TEM ~4.0 one year
DL CW Blue Violet Laser, 405nm 405 nm Operating longitudinal mode Several Applications: DNA Sequencing Spectrum analysis Optical Instrument Flow Cytometry Interference Measurements Laser lighting show
More information200W 500W, Air Cooled QUBE Fiber Lasers
Technical Specification 200W 500W, Air Cooled QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 4 1.5 POWER DISTRIBUTION 4 1.6
More informationSIFIR-50. Stabilized Integrated FIR (THz) Laser System. The SIFIR-50 Advantage FEATURES. Permanently Sealed-Off 50W Pump Laser
Coherent Specialty CO 2 Laser THz Laser SIFIR-50 Stabilized Integrated FIR (THz) Laser System The SIFIR-50 Advantage The SIFIR-50 Laser System brings reliable, easy operation, stable output, and outstanding
More informationAcculase Green PWM. Direct Drive Green Laser Diode Module
Acculase Green PWM Direct Drive Green Laser Diode Module Acculase Direct Drive Green Available in 520nm wavelength and with powers output powers up to 35mW the Acculase Direct Drive Green PWM represents
More informationA Global Laser Brand. FireFly Mini
A Global Laser Brand FireFly Mini FireFly Mini Green The new FireFly Mini green range sets a new standard for small industrial grade, green laser diode modules. A radical new design provides TE stabilised
More informationZM18 Series DATASHEET SENSORPARTNERS.COM. Sensor Partners BVBA Z.1 Researchpark 310 B-1731, Zellik Belgium
ZM18 Series DATASHEET Sensor Partners BV James Wattlaan 15 5151 DP Drunen The Netherlands +31 (0)416-37 82 39 info@sensorpartners.com sensorpartners.com Sensor Partners BVBA Z.1 Researchpark 310 B-1731,
More informationBLUE SKY RESEARCH BLUE
BLUE SKY RESEARCH Blue Sky Research is a company dedicated to providing the best possible balance of performance, value and quality. We have fielded over 1 million lasers since our inception in 1989, and
More informationTURNKEY, ULTRA STABLE, OEM LASER DIODE SOURCE OZ-1000 & OZ-2000 SERIES
29 Westbrook Rd, Ottawa, ON, Canada, K0A L0 Toll Free: -800-36-4 Tel:(63) 83-098 Fax:(63) 836-089 E-mail: sales@ozoptics.com TURNKEY, ULTRA STABLE, OEM LASER DIODE SOURCE OZ-00 & OZ-2000 SERIES Features:
More informationignis TECHNICAL DATA SHEET high specification red laser CW 660nm laser Extremely low noise Power 500mW
CW 660nm laser Extremely low noise Power 500mW TECHNICAL DATA SHEET The high specification 660nm laser Overview The at 660nm and 500mW is among the most powerful and compact red lasers available today
More informationPremier & Acculase Range Modular Modulatable Lasers
Premier & Acculase Range Modular Modulatable Lasers Features Flexible design accommodating wide range of lens and diode options High bore sight accuracy on Acculase model Visible and Infra red versions
More informationAtlantic. series. Industrial High Power Picosecond DPSS Lasers
Atlantic series Industrial High Power Picosecond DPSS Lasers Laser description Laser micromachining is rapidly becoming the material processing technology of choice for numerous small scale, real world
More informationCOMPACT Diode Laser System (Water-Cooled)
COMPACT Diode Laser System (Water-Cooled) Easy-to-integrate CW system consists of a compact 19 (11HU including water-air-chiller), rack-mountable chassis and metal-armored fiber. Can be combined with DILAS
More informationPremier & Acculase Modulatable Laser Diode Modules
Premier & Acculase Modulatable Laser Diode Modules Premier & Acculase Range. The Premier & Acculase laser diode modules represent the highest level of optical and electrical performance at an economical
More informationL4 Series Operator Manual
L4 Series Operator Manual Access Laser Company 917 134 th St SW, Suite A1 Everett, WA 98204 425.582.8674 www.accesslaser.com L4 Series Operator Manual_Rev_J TABLE OF CONTENTS Section Page Company Statement...
More informationHigh Power Supercontinuum Fiber Laser Series. Visible Power [W]
Visible Power [W] Crystal Fibre aerolase Koheras SuperK SuperK EXTREME High Power Supercontinuum Fiber Laser Series 400-2400nm white light single mode spectrum Highest visible power Unsurpassed reliability
More informationSNV/U High Performances UV Microchip Series
SNV/U High Performances UV Microchip Series Key features 355nm and 266nm Repetition rate up to 20kHz Ultrashort pulses down to 550ps Multi-kW peak power Excellent beam quality Efficient, air-cooled Sealed
More informationSingle Frequency DPSS Lasers
Single Frequency DPSS Lasers Any wavelength from NIR to UV using a single engineering platform based on our proprietary patented BRaMMS DPSS Laser technology. We develop and produce Single Frequency DPSS
More informationOptical Information. The LDM145 laser diode modules are available with the following lens types.
LDM145 Datasheet LDM145 The LDM145 is a 16mm diameter CW laser diode module available in wavelengths of 520, 635, 650, 670, 780 & 850nm with power of up to 5mW as standard. It reuires an operating voltage
More informationL25 Series Operator Manual
L25 Series Operator Manual L25 899-07001-000 L25P 899-07005-000 L25D 899-07002-000 Access Laser Company 917 134 th St SW Ste A1 Everett, WA 98204 425.582.8674 www.accesslaser.com REVISION J TABLE OF CONTENTS
More informationFeatures. Applications. Optional Features
Features Compact, Rugged Design TEM Beam with M 2 < 1.2 Pulse Rates from Single Shot to 15 khz IR, Green, UV, and Deep UV Wavelengths Available RS232 Computer Control Patented Harmonic Generation Technology
More informationLRS-0532-PF SERIES INFORMATION SHEET
216-5 ADRIAN AVE. TORONTO, ON, CANADA M6N5G4 T. 1.416.729.7976 F. 1.480.247.4864 SALES@LASERGLOW.COM LRS-0532-PF SERIES INFORMATION SHEET The LRS-0532 Series of Diode-Pumped Solid-State (DPSS) Lasers are
More informationMachine Vision Lyte-MV 2
Machine Vision Lyte-MV 2 The Lyte-MV 2 Range The Lyte-MV 2 provides a reliable industrial light source for a wide range of machine vision applications including triangulation, 3D inspection and alignment.
More informationME7220A. Radar Test System (RTS) Target Simulation & Signal Analysis for Automotive Radar Exceptional Performance at an Affordable Price.
ME7220A Test System (RTS) 76 to 77 GHz Target Simulation & Signal Analysis for Automotive Exceptional Performance at an Affordable Price The Challenge The installation of collision warning and Adaptive
More informationMT110-B50A1.5-IR-Hk + MDPS1C-xx
MT110-B50A1.5-IR-Hk + MDPS1C-xx IR TUNABLE AO MODULATOR SYSTEM Description This complete system has been specially designed for tuneable Ti:Sa. It consists of having a modulator in association with a MPDS
More informationRIO ORION Series 1550nm Low Phase Noise Narrow Linewidth Laser Module
RIO ORION Series 1550 Low Phase Noise Narrow Linewidth Laser Module Key features Single longitudinal mode Center wavelength: 1530-1565, -T DWDM 100 GHz C-band or custom Low phase noise Very narrow linewidth,
More informationDiode Collimator Assembly Datasheet
Diode Collimator Assembly Datasheet Diode Collimator Assembly Global Laser s DCA (Diode Collimator Assembly) provides a low cost high quality OEM solution to manufactures looking for a compact assembly
More informationIntegrated Diode Laser System DioPower
Integrated Diode Laser System DioPower PC with LETSoft program DioPower Integrated Components Applications Laser Diode from 15 to 120W Material processing Laser Diode driver up to 6V / 100A Laser soldering
More informationAtlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Power Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W
More informationSingle Frequency Laser/Single Longitudinal Mode Laser
Single Frequency Laser/Single Longitudinal Mode Laser MSL series lasers with the characteristics of ultra compact, long lifetime, low cost and easy operating, which are used in DNA sequencing, flow cytometry,
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer ITL 4000-S I PN = 4000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. I > 0 P Features Closed
More informationHCS 50W, 60W & 80W. Data Sheet. Housed Collimated High Power Laser Diode Bar
HCS 50W, 60W & 80W Housed Collimated High Power Laser Diode Bar Features: The II-VI Laser Enterprise HCS series of hard soldered collimated laser diode bars offer superior optical beam parameters with
More informationAgilent 81662A DFB Laser Agilent 81663A DFB Laser Agilent Fabry-Perot Lasers
Agilent 81662A DFB Laser Agilent 81663A DFB Laser Agilent Fabry-Perot Lasers Technical Specifications May 2003 The Agilent 81662A low power and 81663A high power DFB Laser Source modules are best suited
More informationUser-selectable output bus voltages for optimized voltage/current matching to load requirements.
Three Axis Gradient Amplifier 3-Axis 700A Precision Gradient Amplifier System 1500 VDC (OEM adjustable down to 800V) 100% Digital D-SERIES Technology Hi-Speed, Single Fiber-Optic Digital Command Universal
More informationNmark AGV-HPO. High Accuracy, Open Frame, Thermally Stable Galvo Scanner. Highest accuracy scanner available attains singledigit,
Nmark AGV-HPO Galvanometer Nmark AGV-HPO High Accuracy, Open Frame, Thermally Stable Galvo Scanner Highest accuracy scanner available attains singledigit, micron-level accuracy over the field of view Optical
More informationHigh-Power 8xx nm Fiber-Coupled Diode Laser 2495-L3 Series
COMMERCIAL LASERS High-Power 8xx nm Fiber-Coupled Diode Laser 2495-L3 Series Key Features 4.0 W output power industrial 808 nm 4.5 W output power medical/dental 812 nm 105 µm aperture 0.2 NA Highly reliable
More informationDPSS 266nm Deep UV Laser Module
DPSS 266nm Deep UV Laser Module Specifications: SDL-266-XXXT (nm) 266nm Ave Output Power 1-5mW 10~200mW Peak power (W) ~10 ~450 Average power (mw) Average power (mw) = Single pulse energy (μj) * Rep. rate
More informationPHOTOELECTRIC SENSORS. Online data sheet
Online data sheet A B C D E F Illustration may differ Ordering information Type Part no. WTB4SL-3P6V 0585 Other models and accessories www.sick.com/w4sl-3v H I J K L M N O P R S T Detailed technical data
More informationHigh Power and Energy Femtosecond Lasers
High Power and Energy Femtosecond Lasers PHAROS is a single-unit integrated femtosecond laser system combining millijoule pulse energies and high average powers. PHAROS features a mechanical and optical
More informationHigh-Power Femtosecond Lasers
High-Power Femtosecond Lasers PHAROS is a single-unit integrated femtosecond laser system combining millijoule pulse energies and high average power. PHAROS features a mechanical and optical design optimized
More informationAgilent 81980/ 81940A, Agilent 81989/ 81949A, Agilent 81944A Compact Tunable Laser Sources
Agilent 81980/ 81940A, Agilent 81989/ 81949A, Agilent 81944A Compact Tunable Laser Sources December 2004 Agilent s Series 819xxA high-power compact tunable lasers enable optical device characterization
More informationTunable Lasers. Figure 1, Photo of the Tunable Laser OEM Module, Model: TL-MC040TA101
Tunable Lasers The TL-MC040TA101 tunable laser is a high performance continuous wave (CW) tunable laser source for various test and measurement applications the C-band wavelength range covering from 1528nm
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationNL300 series. Compact Flash-Lamp Pumped Q-switched Nd:YAG Lasers FEATURES APPLICATIONS NANOSECOND LASERS
NL200 NL210 NL230 NL300 NL740 electro-optically Q-switched nanosecond Nd:YAG lasers produce high energy pulses with 3 6 ns duration. Pulse repetition rate can be selected in range of 5 20 Hz. NL30 HT models
More informationM12 Class 1 Laser Emitter
IEC Class 1 Laser for use with Banner modulated receivers CAUTION... Never stare directly into the emitter lens. Laser light can damage your eyes. Avoid placing any mirror-like object in the beam. Never
More informationFlash-lamp Pumped Q-switched
NL120 NL200 NL220 NL230 NL300 NL303D NL310 NL300 series electro-optically Q-switched nanosecond Nd:YAG lasers produce high energy pulses with 3 6 ns duration. Pulse repetition rate can be selected in range
More informationProSeries Scan Head 2-Axis, Enclosed
Product Highlights Our ProSeries 2-Axis enclosed scan heads are designed for a broad range of applications that require fast processing speeds or high-position accuracy. The plug-and-play scan heads are
More information895nm Single-Mode VCSEL
895nm Single-Mode VCSEL Part number code: 895S--X2 PRODUCT DESCRIPTION A true (both spectrally single mode and Gaussian beam shape) single transverse mode 895nm Infrared VCSEL, with single linear polarized
More informationGeneral. Environmental. EMC & Safety
65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package
More informationA-CUBE-Series High Sensitivity APD Detector Modules
Series Description Laser Components new A-CUBE range of APD modules has been designed for customers interested in experimenting with APDs. Featuring a low-noise silicon (or InGaAs) APD with matched preamplifier
More informationAOM Driver 3307 Series
AOM Driver 3307 Series 1 to 4 Watt RF Drivers for Acousto-Optic Modulators The 3307 Series RF driver provides up to 4 Watts output power. Various types cover a frequency range of 80 to 350 MHz. The maximum
More informationICAM. Electronics & Software. Industrial Charge Amplifier for Applications in Manufacturing. Type 5073A...
Electronics & Software ICAM Type 5073A... Industrial Charge Amplifier for Applications in Manufacturing The ICAM charge amplifier (Industrial Charge Amplifier Manufacturing) converts the piezoelectric
More informationAPC. Omicron-Laserage Laserprodukte GmbH V DC. Feature pictograms. Product catalog Light sources.
Feature pictograms Omicron-Laserage Laserprodukte GmbH Analogue modulation capability High stability CW operation UL certified Digital modulation capability 24VDC supply voltage APC Automatic Power Control
More informationAtlantic. Industrial High Power Picosecond Lasers. features
Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 6 W output power at
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
2 GHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationOEM s #1 Choice for X-Ray Sources and Generators. Focus on Performance, Reliability, Form Factor, and Versatility.
OEM s #1 Choice for X-Ray Sources and Generators Focus on Performance, Reliability, Form Factor, and Versatility www.vjtxray.com Applications Security, Industrial NDT, Food & Pharmaceutical, Quality &
More informationAL30 Operator Manual
AL30 Operator Manual Pictured AL30 Air Cool Access Laser Company 917 134 th St SW, Suite A1 Everett, WA 98204 425.582.8674 www.accesslaser.com AL30 Series Operator Manual_Rev_I.Docx Section TABLE OF CONTENTS
More informationHigh-Power 8.0 W 9xx nm Fiber-Coupled Diode Laser 6397-L3 Series
COMMERCIAL LASERS High-Power 8.0 W 9xx nm Fiber-Coupled Diode Laser 6397-L3 Series Key Features 8.0 W output power 105 µm aperture 0.2 NA Highly reliable Applications Fiber laser pumping Material processing
More informationOPERATING MANUAL. ACOUSTO OPTIC MODULATOR MODEL NUMBER: X-LTD X= 1, 2, or 3 mm DOCUMENT NUMBER: 51A00620D
OPERATING MANUAL ACOUSTO OPTIC MODULATOR MODEL NUMBER: 23080-1 23080-X-LTD X= 1, 2, or 3 mm DOCUMENT NUMBER: 51A00620D Document approved for release: W Seale Date: 6/20/06 US OFFICE:. 4005 Opportunity
More informationDATA SHEET. OD Precision. Displacement sensors for precise and comprehensive measurement tasks
DATA SHEET OD Precision Displacement sensors for precise and comprehensive measurement tasks OD Precision Displacement sensors for precise and comprehensive measurement tasks Displacement sensors from
More informationNON-AMPLIFIED HIGH SPEED PHOTODETECTOR USER S GUIDE
NON-AMPLIFIED HIGH SPEED PHOTODETECTOR USER S GUIDE Thank you for purchasing your Non-amplified High Speed Photodetector. This user s guide will help answer any questions you may have regarding the safe
More informationCobolt Skyra. Multi-line Laser 405 nm 515 nm 633 nm. 445 nm 532 nm 638 nm 473 nm 553 nm 647 nm 488 nm 561 nm 660 nm
Cobolt Skyra Multi-line Laser 405 nm 515 nm 633 nm 445 nm 532 nm 638 nm 473 nm 553 nm 647 nm 488 nm 561 nm 660 nm 2 48 CONTENTS Introduction 5 Safety 6 General 6 Fiber Coupled Option 7 Accessible emission
More informationNmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP(O) Galvanometer Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical
More informationCCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
More informationNmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical feedback technology significantly
More informationINPROX sensors. displacement MLS compact ccd-laser distance sensor
compact ccd- distance sensor MLS7-250 high vibration and shock resistant -CCD specifications measuring range 250mm resolution >50µm measuring frequency 1000Hz small dimensions (mm) (65x50x20) high shock
More information