Demonstration Thermography report

Transcription

1 Company Testo Ltd Newman Lane Alton, GU34 2QJ Tester: Andy McGrath Testo Phone: Device Testo 8803, 8752 & 8813 Serial No.: Lens: , & degree, Wide Angle Lens Customer Testo Ltd Testo Thermal Imaging Cameras Demo Report Measuring Site: Demonstration Thermography Report Various Applications for Testo Thermal Imaging cameras in HVAC. Measuring Various Task Demonstration Thermography Report to highlight the capabilities of the Testo Thermal Imaging cameras for various applications associated to HVAC. Page 1/15

2 IV_00518.BMT 14/01/ :57:02 Measure point Spot Temp 1 to indicate Spot Temp 2 to indicate Spot Temp 3 to indicate Spot Temp 4 to indicate Thermal Survey, specifically in a Utility Room for Trace and Access application.thermal and Digital images of Floor area taken as part of an investigation for possible leaks. Thermal image highlights temperature variation across the, this is therefore an indication of the location of the heating pipework under the. Page 2/15

3 IV_00662.BMT 09/04/ :27: Thermal Survey at a Domestic Property.Thermal and Digital images of Floor area taken as part of an investigation for possible leaks. Thermal image highlights, this is therefore an indication of the location of the heating pipework under the.spot temperature markers highlight temperature difference across where heating pipework is located. Page 3/15

4 IV_00663.BMT 09/04/ :28: Thermal Survey at a Domestic Property.Thermal and Digital images of Floor area taken as part of an investigation for possible leaks. Thermal image highlights, this is therefore an indication of the location of the heating pipework under the.spot temperature markers highlight temperature difference across where heating pipework is located. Page 4/15

5 IV_00383.BMT 08/12/ :26:37 Measure point 4 Measure point Spot Temp 1 on Tiled Floor adjacent to radiator Spot Temp 2 on Tiled Floor adjacent to end of Skirting board Spot Temp 3 on Tiled Floor next to glazed section Spot Temp 4 on Tiled area away from where the hot water pipes are located Spot Temp 5 on Tiled area away from where the hot water pipes are located Demonstration Thermal survey conducted with Testo 880 series Thermal Imaging camera. Conducted in Glazed walkway between Lounge and Kitchen extension. The homeowner is complaining of possible water leak under the tiled. At the time that this Thermal and Digital image were taken, the heat pattern effect from the hot water pipes under the were able to be seen in the the Thermal image, travelling the length of the walkway but no anomaly is apparent at this stage. Spot Temperatures have been added to the image to indicate the temperatures along the path of the pipes. A temperature profile line graph has been added to the thermal image, to highlight the temperature variation across the tiled. Page 5/15

6 IV_00386.BMT 08/12/ :32:32 Measure point 4 Hot spot Spot Temp 1 to indicate Spot Temp 2 to indicate Spot Temp 3 to indicate Spot Temp 4 to indicate HS1 Hottest point on Thermal Image Thermal survey conducted with Testo 880 series Thermal Imaging camera for Trace and Access application. In Glazed walkway between Lounge and Kitchen extension. The homeowner is complaining of possible water leak under the tiled. The Thermal image shows the heat pattern effect from the heating pipes under the, travelling the length of the walkway and now a hot spot can be seen clearly. This is an indication of an anomaly, a possible leak from the central Heating system. The temperature in this area has increased and is indicating an anomaly that requires investigation. Page 6/15

7 IV_00585.BMT 10/03/ :15:17 Measure point 4 Measure point Spot Temp 1 for temperature Spot Temp 2 for temperature Spot Temp 3 for temperature Spot Temp 4 for temperature Spot Temp 5 for temperature Thermal and Digital images of a domestic radiator. Taken with Testo 880 series Thermal imaging camera to demonstrate the capabilities of the camera and the Testo IR software. Spot temperature markers have been added to show the radiator. A temperature profile line graph has also been added to visually show the temperature profile across the raditor vertically. Page 7/15

8 IV_00596.BMT 10/03/ :21: Spot Temp 1 for temperature Spot Temp 2 for temperature Spot Temp 3 for temperature Thermal and Digital images of a domestic radiator. Taken with Testo 880 series Thermal imaging camera to demonstrate the capabilities of the camera and the Testo IR software. Spot temperature markers have been added to show the radiator. A temperature profile line graph has also been added to visually show the temperature profile across the raditor diagonally. The palette has been changed to Hot/Cold. Page 8/15

9 IV_00601.BMT 10/03/ :24:10 Measure point Histogram: Thermal and Digital images of a domestic radiator. Taken with Testo 880 series Thermal imaging camera to demonstrate the capabilities of the camera and the Testo IR software. Additional spot temperature markers have been added to show the radiator. A temperature profile line graph has also been added to visually show the temperature profile across the raditor diagonally. A Histogram has also been applied to the thermal image which defines the number of temperature points at specific temperatures within a defined area. Page 9/15

10 IV_00537.BMT 29/01/ :58:15 Measure point 4 Measure point 5 Measure point 6 Measure point 7 Measure point 8 Measure point 9 Hot spot Spot Temp 1 indicates Floor temperature above the coil Spot Temp 2 indicates Floor temperature above the coil Spot Temp 3, indicates the temperature at section where there is no heating coil Spot Temp 4 indicates Floor temperature above the coil Spot Temp 5 indicates Floor temperature above the coil Spot Temp 6, indicates the temperature at section where there is no heating coil Spot Temp 7 indicates Floor temperature above the coil Spot Temp 8 indicates Floor temperature above the coil Spot Temp 9, indicates the temperature at section where there is no heating coil Auto Hot spot indicator Page 10/15

11 Thermal and Digital Images of Office Floor, taken with the Testo 880 series Thermal Imaging camera. The Thermal image highlights the location of the under heating coils. A temperature Profile Line graph has been applied to the Thermal image to verify the temperatures across the under heating coils. Spot temperature markers have been added to indicate the temperatures of the system at the surface. The thermal image is shown in "Iron" palette. Page 11/15

12 IV_00538.BMT 29/01/ :58:30 Hot spot Thermal and Digital Images of Office Floor, taken with the Testo 880 series Thermal Imaging camera. The Thermal image highlights the under heating coils. The thermal image also has the auto Hot spot indicator applied to indicate automatically, the hottest point "HS1" in the designated area. A temperature Profile Line graph has been applied to the Thermal image to verify the temperatures across the under heating coils. Spot temperature markers have been added to indicate the temperatures of the system at the surface. The Thermal image is shown in "Iron" Palette. Page 12/15

13 IV_01244.BMT 04/09/ :37:00 Measure point Demonstration Thermal Survey, at a Domestic Property.Thermal and Digital images of Hot Water system, Dual Pump for shower. Thermal image highlights equipment and pipework, Spot temperature markers highlight temperature difference in respect of the pipework and pump and indicate which sections are operational. Page 13/15

14 IV_01224.BMT 04/09/ :45:34 Hot spot Demonstration Thermal Survey, at a Domestic Property.Thermal and Digital images of Hot Water Pump. Thermal image highlights equipment and pipework, Spot temperature markers highlight temperature difference in respect of the pipework and pump and indicate which sections are operational. Review: Demonstration Thermography Report to highlight the capabilities of the Testo Thermal Imaging cameras and the Testo IR software. This is an example report for Demonstration purposes only. The format is the "Standard" report template from the selection of Report Templates available in the software. There are various subjects for the Thermal images and this report is compiled to indicate the capability of the cameras and the software for a number of applications in the HVAC Industry. Some of the features of the camera and software have been applied to the Thermal images. Spot Temperature markers have been added to the thermal images to indicate temperatures. Auto Hot / Cold Spot Indicator has been applied, which automatically highlights the Hottest or Coldest point Page 14/15

15 Auto Hot / Cold Spot Indicator has been applied, which automatically highlights the Hottest or Coldest point in the defined area. Temperature Profile Line Graph shows the temperature variation in graph form across the subject. Palettes Various palettes (from the range available) have been used. The images are automatically Time and Date Stamped to verify the time and date when the images were taken. The report also details the Emissivity value relating to the image taken. 25/09/2009, Andy McGrath Testo Page 15/15