Section 2 - Applications - General

Transcription

1 Section 2 - Applications - General Section 2A - FD30 Strebord 35+, 38+, 44 Superpan with MDF Wood Frames Section 2B - FD30 Strebord 35+, 38+, 44, Superpan Strebord with Steel Frames Section 2C - FD30 Strebord 35+ with Softwood Stiles Rails with MDF Wood Frames Section 2D - FD30 Strebord 38+ with Softwood Stiles Rails with MDF Wood Frames Section 2E - FD30 Acrovyn Clad Doors with MDF Wood Frames Section 2F - FD60 Strebord Hardwood Frames Section 2G - FD60 Strebord MDF Frames Section 2H - FD60 Strebord Steel Frames Section 2J - FD60 Acrovyn Clad Doors Section 2K - FD60 Streframe wood frames.

2 FA LCON PANEL PRODUCTS LTD

3 Fire Door Applications 2.1 Safety provisions in the event of fire are generally described by reference to National Regulations. In addition, requirements may be influenced by: Local Bye Laws. Client specifications. NOTE: Client specifications may take into account the particular purpose of the building e.g. HTM58 for Hospitals or Building Bulletin 100 for Schools in the United Kingdom. The applicable Regulation for Engl Wales is: Building Regulations (Engl Wales) Approved Document B Edition incorporating amendments. NOTE: Similar regulations apply in Scotl, Northern Irel the Republic of Irel. Approved Document B is in two parts: Approved Document B1' applies to Dwellings. Approved Document B2' applies to Public Buildings. For dwellings, the doorset designs are generally determined by the door / doorset manufacturer are normally available in stard sizes (See BS4787 Pt.1) from Builders Merchant sources. The doors / doorsets are generally manufactured for stock with no particular final location in mind. For public buildings, the design of the doorsets may be determined by an Architect or Designer with each doorset designed to suit a particular opening in a particular building. This may result in a wide variety of dimensional feature requirements often with performance attributes in addition to the fire performance. A stard (prescribed) product can be tested to the required performance stard supplied on the basis of the base test evidence. For non stard or bespoke products it would be an impossible task to test every possible variant in size, configuration, glazing requirements hardware variations. The method adopted in the United Kingdom is for bespoke doorset suppliers to test constructions to provide for applications envelopes. NOTE: Similar methods apply in the United States of America, Commonwealth ex Commonwealth countries many other Middle Eastern Far Eastern states. An applications envelope is determined by way of expert opinion based upon test evidence. The base test evidence sources include testing carried out by the door core manufacturer other doorset component suppliers / manufacturers. e.g. intumescent seal, glass, hardware suppliers / manufacturers. etc. The owners of the base test data make their test evidence available to a 3rd. party certification body (expert organisation). The independent 3rd. party certification bodies create what is generally described as a Global Assessment which sets out the parameters for fire door applications related to a particular construction. As with any expert opinion, opinions may differ according to the experiences of the particular 3rd. party certification provider. This manual sets out the parameters for the application of Strebord based fire performance doorsets under the Q Mark scheme that is administered by BM TRADA. maintain the Q Mark certification the doorset manufacturer using Strebord must also be a member of the Q Mark certification scheme. For various reasons, users of Strebord may wish to be members of alternative 3rd. party certification schemes. A list of leading providers of 3rd party certification is provided by reference to Section 15 - Appendix of this manual together with brief details of facilities offered contact details. Falcon Panel Products Ltd. provide support for all of the listed 3rd. party certification providers by making base test evidence available for the purpose of assessment. NOTE: The term assessment related to the assessment provided by 3rd. party certification bodies should not be confused with the term assessment used in Approved Document B for the purpose of regulation. The assessment required by reference to regulations is determined by the authorities responsible for the particular building, generally recognised as being the Designer, in consultation with Local Building Control, (where applicable) the Local Fire Services. The authorities may accept the expert opinions provided by 3rd. party certification bodies as guidance but they are under no obligation to accept such expert advice. Fire Door Applications Fire Door Applications:

4 Fire Door Applications 2.2 Fire Door Applications Fire Door Applications contd. The particular project authorities may require: a/ 3rd, party certification originating from a particular 3rd. party certification provider. b/ A project assessment related to the particular design requirements for a particular building. c/ Further testing of particular designs or design detail. d/ Additional 3rd. party certification to cover particular requirements that are outside of the scope of the Global Assessment. NOTE 2: More limited application dimensions apply to some intumescent seal types. This does not imply that the particular seal type is in anyway inferior but rather, this reflects the extent of testing carried out with the particular seal types at the time of publication of this manual. A continuing fire test programme is likely to result in variations to these published application dimensions users should contact Falcon Panel Products Ltd. for further advice for applications not covered by this manual. NOTE 3: This Section should not be read in isolation, refer to other sections for detail information. There is generally an additional cost where there is a dem for certification in addition to that provided by the Global Assessment. The cost will be influenced by the work required the extent of the which any resultant data is limited to the particular project or can be applied generally for future applications. WARNING: Various formulae are used in the manufacture of intumescent seals which may provide for different performance characteristics under fire conditions. The mixing of intumescent seal types for use in the same doorset is not approved. Falcon Panel Products Ltd. will support users of Strebord by providing base test data owned by them for reference by 3rd. party certification bodies. Further, Falcon Panel Products Ltd. may provide support for users of Strebord cores who wish to carry out further testing by way technical support the provision of core materials for testing purposes. Door Gaps / Alignment: The following describes the maximum / minimum approved operating gaps door leaf positioning for fire door applications. This advice is related specifically to the achievement of design fire performances should not be referred to as an authority to vary the requirements of BS 4787 Pt.1 for general applications or BS9999 in respect of smoke sealed doorsets. Project specifications will generally define the regulations to be applied to the particular building with a further definition of design requirements. It is generally the responsibility of the doorset manufacturer to provide for the necessary documentation to the reasonable satisfaction of the project authorities. It is strongly recommended that considerations of this nature are dealt with in advance of manufacture of the doorsets. This section provides for general guidance for the application of Strebord core doors for BS476 Pt.22 related FD30 FD60 performances. It is important to note that size envelopes may vary according to the size type of intumescent seal used. Reference should be made to other sections in this manual to determine recommended intumescent seal locations requirements for additional intumescent gaskets for use with hardware. NOTE 1: The dimensional envelopes for the fire door application of Strebord core doors will vary according to the size type of intumescent seal selected for the particular project. assist users, this Section identifies application dimensions related to intumescent seal type size. Location Head Stile edge gaps. Threshold Alignment Dimension Approved minimum = 2mm Approved maximum = 4mm Approved maximum = 10mm above finished floor level. Door leaves must not project beyond the face of the adjacent door / panel or the frame by more than1mm For further details please contact: Falcon Panel Products Ltd., Clock House, Station Approach, Shepperton, Middlesex TW17 8AN Tel: +44 (0) Fax: +44 (0)

5 Fire Door Applications 2.3 The majority of fire testing carried out by Falcon Panel Products Ltd. relates to BS476 Pt.22 to the satisfaction of Building Regulations - (Engl Wales) - Approved Document B. Current European Stards require testing to BS EN for the purpose of CE marking doorsets for fire performance applications. The scope for determining applications envelopes by way of expert opinion as currently practised in the United Kingdom ( in other world markets) has yet to be finalised at the time of preparation of this manual it is unclear how CE marking might be applied to bespoke products where designs ( possibly some doorset components) are determined by others (generally an Architect or Designer) who is not employed by (or under the control of) the manufacturer - where the doorsets are not offered to the world at large - where doorsets are purpose made, (usually in contract related batches) to suit a particular opening in a particular building according to a contract related time programme. withsting this, it can be anticipated that CE marking may be required in due course for stard (prescribed) products that are offered for sale to the world at large - are manufactured without a particular user location in mind - where the designs are determined wholly by the doorset manufacturer. Whereas the (ISO related) time / temperature curve is identical for both the BS476 Pt.22 EN BS test, there are differences between the tests as follows: Pressure normal - The pressure normal in the furnace (point at which the pressure is equal on both faces of the door) is mm above floor level for the 476 Pt.22 test with this lowered to 500mm above floor level for the test. Thermocouples - Twisted wire thermocouples are used for the 476 Pt.22 test with plate thermocouples used for the test. Twisted wire thermocouples react more quickly to changes in temperature thus, the front end charge required to heat the thermocouples is more aggressive for the test. European Stards for the extended application of base test data have now be agreed but have yet to be applied to the increasing library of BS EN base test data now accumulated by Falcon Panel Products Ltd. Strebord provides for a competitive reliable door core product that is suitable for a wide range of doorset performance applications, including fire performances. Falcon Panel Products Ltd. have now carried out a number of tests to the BS EN test stard will continue with this programme in pursuance of a commitment to support manufacturers who wish to carry out further testing of their designs (where the designs are based upon the use of the Strebord core) for CE marking purposes. Fire Door Applications CE Marking:

6 FA LCON PANEL PRODUCTS LTD

7 Door Assemblies Storey Assemblies with Transom Palusol P100 LATCHED DOORSETS 2F x x Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Palusol 100 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Hardood Frames / FD60 Fire Door Applications Pairs =1005mm

8 2F.2 Door Assemblies Storey Assemblies with Transom Palusol P100 UNLATCHED DOORSETS Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 980mm x 2x Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Palusol 100 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

9 Storey Assemblies with Flush Overpanels Palusol P100 LATCHED DOORSETS 2F x 2x with flush overpanel with flush overpanel Action Single Door with flush overpanel (LSASD+OP) Action Double Door with flush overpanel (LSADD+OP) Glazed Area mm mm 640kg/m3 Hardwood Door / Overpanel: Square: 40x4mm PVC encapsulated Palusol 100 fitted centrally in the bottom of 2x15x4mm PVC encapsulated the overpanel or top of the door leaf. Palusol 100 Rebated: 1No. 25x4mm centrally fitted in the bottom of the rebate at the leaf head See Section 4-1No. 15x4 centrally fitted in the rebate in the overpanel. Jambs Overpanel: 2No. 15x4mm spaced 10mm apart exposed centrally fitted to leaf / overpanel or frame. Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 955mm

10 2F.4 Storey Assemblies with Flush Overpanels Palusol P100 UNLATCHED DOORSETS Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 930mm with flush overpanel with flush overpanel 2x 2x Action Single Door with flush overpanel(ulsasd+op) Single Door with flush overpanel (DASD+OP) Action Double Door with flush overpanel (ULSADD+OP) Double Door with flush overpanel (DADD+OP) Glazed Area mm mm 640kg/m3 Hardwood Door / Overpanel: Square: 40x4mm PVC encapsulated Palusol 100 fitted centrally in the bottom of 2x15x4mm PVC encapsulated the overpanel or top of the door leaf. Palusol 100 Rebated: 1No. 25x4mm centrally fitted in the bottom of the rebate at the leaf head See Section 4-1No. 15x4 centrally fitted in the rebate in the overpanel. Jambs Overpanel: 2No. 15x4mm spaced 10mm apart exposed centrally fitted to leaf / overpanel or frame. Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

11 Door Assemblies Storey Assemblies with Transom Pyroplex LATCHED DOORSETS 2F.5 NOTE: Extended width with reduced height approved for single leaf doorsets x x1042 Action Single Door (LSASD) OR Action Double Door (LSADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Pyroplex Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.. Strebord / Hardood Frames / FD60 Fire Door Applications Pairs =1042mm

12 2F.6 Door Assemblies Storey Assemblies with Transom Pyroplex UNLATCHED DOORSETS NOTE: Extended width with reduced height approved for single leaf doorsets Strebord / Hardood Frames / FD60 Fire Door Applications Pairs =1017mm x x1017 Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) OR OR Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Pyroplex Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

13 Door Assemblies Storey Assemblies with Transom Therm-A-Seal LATCHED DOORSETS 2F x 2x Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Therm-A-Seal Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 972mm

14 2F.8 Door Assemblies Storey Assemblies with Transom Therm-A-Seal UNLATCHED DOORSETS Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 947mm x 2x Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Therm-A-Seal Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

15 Door Assemblies Storey Assemblies with Transom Lorient 617 LATCHED DOORSETS 2F x 2x Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Lorient 617 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 926mm

16 2F.10 Door Assemblies Storey Assemblies with Transom Lorient 617 UNLATCHED DOORSETS Strebord / Hardood Frames / FD60 Fire Door Applications Pairs = 926mm x 2x Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Lorient 617 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

17 Door Assemblies MDF Frames Pyroplex LATCHED DOORSETS 2G.1 MDF Frames x x Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area Approved NOTE: Storey height doorsets with transoms are not approved with MDF frames. Min.700kg/m3 MDF Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Pyroplex Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.. Strebord / MDF Frames / FD60 Fire Door Applications Pairs =1050mm

18 2G.2 MDF Frames MDF Frames Door Assemblies Pyroplex UNLATCHED DOORSETS Strebord / MDF Frames / FD60 Fire Door Applications Pairs =1025mm 2x x Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area NOTE: Storey height doorsets with transoms are not approved with MDF frames Approved Min.700kg/m3 MDF Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Pyroplex Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

19 NORDFORM STEEL FRAMES Nordform Steel Frames Door Assemblies Pyroplex Interdens LATCHED DOORSETS 2H x931 2x Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area Approved Mild Steel Stainless Steel Head: 1No. 38x4mm Pyroplex flat seal located on top of 38x2mm Interdens fitted centrally in the door leaf head. Jambs: 2No. 15x4mm Pyroplex Rigid Box seals, separated by 8mm located with the closing face seal positioned 8mm from the face of the door. Meeting edges: See Section 4 - Square: 2No. 15x4mm Pyroplex Rigid Box seals, separated by 8mm located with the closing face seal positioned 8mm from the face of the door in one leaf only. Interdens PVC encapsulated Pyroplex Strebord / Steel Frames / FD60 Fire Door Applications Pairs = 956mm

20 2H.2 NORDFORM STEEL FRAMES Nordform Steel Frames Door Assemblies UNLATCHED DOORSETS Pyroplex Interdens Strebord / Steel Frames / FD60 Fire Door Applications Pairs = 931mm x Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area Approved Approved Approved Approved Approved Mild Steel - Frames Head: 1No. 38x4mm Pyroplex flat seal located on top of 38x2mm Interdens fitted centrally in the door leaf head. Jambs: 2No. 15x4mm Pyroplex Rigid Box seals, separated by 8mm located with the closing face seal positioned 8mm from the face of the door. Meeting edges: See Section 4 - Square: 2No. 15x4mm Pyroplex Rigid Box seals, separated by 8mm located with the closing face seal positioned 8mm from the face of the door in one leaf only.. Interdens PVC encapsulated Pyroplex

21 UNSPECIFIED STEEL FRAMES Door Assemblies Unspecified Steel Frames 25x4mm PVC Therm-A-Seal Therm-A-Flex LATCHED DOORSETS 2H x x Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area Approved Mild Steel Stainless Steel Head: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door PVC encapsulated Therm-A-Seal Therm-A-Flex thickness concealed behind lippings. Jambs: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door See Section 4 - thickness concealed behind lippings. Meeting edges: Square: Primary Leaf = 25x4mm Therm-A-Seal exposed fitted centrally in the leaf. 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door thickness concealed behind lippings. Secondary Leaf: 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door thickness concealed behind lippings. Threshold: 20x2mm Therm-A-Flex fitted centrally to the bottom edge of each leaf. Strebord / Steel Frames / FD60 Fire Door Applications Pairs = 988mm

22 2H.4 UNSPECIFIED STEEL FRAMES Unspecified Steel Frames Door Assemblies 25x4mm PVC Therm-A-Seal Therm-A-Flex UNLATCHED DOORSETS Strebord / Steel Frames / FD60 Fire Door Applications Pairs = 963mm x896 2x Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area Approved Approved Approved Approved Approved Mild Steel - Frames Head: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door thickness PVC encapsulated concealed behind lippings. Therm-A-Seal Therm-A-Flex Jambs: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door thickness See Section 4 - concealed behind lippings. Meeting edges: Square: Primary Leaf = 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door thickness concealed behind lippings. Secondary Leaf: 2No. 10x2mm Therm-A-Flex spaced 15mm apart located centrally in door thickness concealed behind lippings. Threshold: 20x2mm Therm-A-Flex fitted centrally to the bottom edge of each leaf.

23 UNSPECIFIED STEEL FRAMES Door Assemblies Unspecified Steel Frames 25x4mm PVC Therm-A-Seal Therm-A-Flex LATCHED DOORSETS 2H Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area Approved Approved Approved Mild Steel Stainless Steel Head: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. PVC encapsulated Therm-A-Seal Therm-A-Flex 25x2mm Therm-A-Flex fitted underneath Therm-A-Seal. Jambs: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 25x2mm Therm-A-Flex fitted underneath Therm-A-Seal. See Section 4 - Meeting edges: applicable. Threshold: 20x2mm Therm-A-Flex fitted centrally to the bottom edge of each leaf. Strebord / Steel Frames / FD60 Fire Door Applications

24 2H.6 UNSPECIFIED STEEL FRAMES Unspecified Steel Frames Door Assemblies 25x4mm PVC Therm-A-Seal Therm-A-Flex UNLATCHED DOORSETS Strebord / Steel Frames / FD60 Fire Door Applications NOTE: Strebord mm thickness core used with steel frame doorsets. Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area Approved Approved Approved Approved Approved Approved Approved Mild Steel - Frames Head: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. PVC encapsulated 25x2mm Therm-A-Flex fitted underneath Therm-A-Seal. Therm-A-Seal Therm-A-Flex Jambs: 25x4mm Therm-A-Seal exposed fitted centrally in the door leaf. 25x2mm Therm-A-Flex fitted underneath Therm-A-Seal. See Section 4 - Meeting edges: applicable. Threshold: 20x2mm Therm-A-Flex fitted centrally to the bottom edge of each leaf.

25 Acrovyn Faced Door Assemblies Storey Assemblies with Transom CS Group - Acrovyn Lorient 617 LATCHED DOORSETS 2J Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed fitted centrally in the door leaf or frame with a 5mm separation. 15x4mm PVC encapsulated Jambs Overpanel: 2No. 15x4mm exposed fitted centrally in the frame Lorient 617 reveal with a 5mm separation. + 1No. 10x4 fitted centrally in the door leaf overpanel thickness to stiles only. See Section 4 - Meeting edges: Square: 1No. 15x4mm fitted centrally in both door leaves. Rebated: approved. Acrovyn Faced / Strebord / Wood Frames / FD60 Fire Door Applications Pairs = 945mm

26 2J.2 CS Group - Acrovyn Acrovyn Faced Door Assemblies Storey Assemblies with Transom Lorient 617 UNLATCHED DOORSETS Pairs = 945mm Acrovyn Faced / Strebord / Wood Frames / FD60 Fire Door Applications x x945 Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm 640kg/m3 Hardwood Head: 2No. 15x4mm exposed fitted centrally in the door leaf or frame with a 5mm separation. 15x4mm PVC encapsulated Jambs Overpanel: 2No. 15x4mm exposed fitted centrally in the frame Lorient 617 reveal with a 5mm separation. + 1No. 10x4 fitted centrally in the door leaf overpanel thickness to stiles only. See Section 4 - Meeting edges: Square: 1No. 15x4mm fitted centrally in both door leaves. Rebated: approved.

27 Streframe Door Assemblies Storey Assemblies with Transom Streframe Palusol P100 LATCHED DOORSETS 2K.1 Pairs = 935mm Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Palusol 100 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Streframe Wood Frames / FD60 Fire Door Applications

28 2K.2 Streframe Door Assemblies Storey Assemblies with Transom Streframe Palusol P100 UNLATCHED DOORSETS Pairs = 935mm Strebord / Streframe Wood Frames / FD60 Fire Door Applications Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Palusol 100 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

29 Streframe Door Assemblies Storey Assemblies with Transom Streframe Lorient 617 LATCHED DOORSETS 2K.3 Pairs = 935mm Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Lorient 617 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Streframe Wood Frames / FD60 Fire Door Applications

30 2K.4 Streframe Door Assemblies Storey Assemblies with Transom Streframe Lorient 617 UNLATCHED DOORSETS Pairs = 935mm Strebord / Streframe Wood Frames / FD60 Fire Door Applications Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Lorient 617 Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

31 Streframe Door Assemblies Storey Assemblies with Transom Streframe Therm-A-Seal LATCHED DOORSETS 2K.5 Pairs = 935mm Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Therm-A-Seal Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf. Strebord / Streframe Wood Frames / FD60 Fire Door Applications

32 2K.6 Streframe Door Assemblies Storey Assemblies with Transom Streframe Therm-A-Seal UNLATCHED DOORSETS Pairs = 935mm Strebord / Streframe Wood Frames / FD60 Fire Door Applications Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Therm-A-Seal Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.

33 Streframe Door Assemblies Storey Assemblies with Transom Streframe Pyroplex LATCHED DOORSETS 2K.7 Pairs = 935mm Action Single Door (LSASD) Action Double Door (LSADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Pyroplex Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.. Strebord / Streframe Wood Frames / FD60 Fire Door Applications

34 2K.8 Streframe Door Assemblies Storey Assemblies with Transom Streframe Pyroplex UNLATCHED DOORSETS Pairs = 935mm Strebord / Streframe Wood Frames / FD60 Fire Door Applications Action Single Door (ULSASD) Single Door (DASD) Action Double Door (ULSADD) Double Door (DADD) Glazed Area mm mm Streframe Head: 2No. 15x4mm exposed, separated by 10mm fitted centrally in the leaf Pyroplex Jambs Overpanel: 2No. 15x4mm exposed, separated by 10mm centrally See Section 4 - Meeting edges: Square: 2No. 15x4mm spaced 10mm apart centrally fitted in one leaf.