Architectural Lighting in a whole new light

Transcription

1

2 rchitectural Lighting in a whole new light ringing architectural styling, LE technology, and photometric performance together in a whole new light! Visionaire s new stylish LE fixtures of today, now provide exceptional lighting performance; previously unheard of in decorative architectural fixtures. Introducing Two new contempory LE rchitectural Lighting products The new post top PEX Series is available with either 6 or 8 LEs; with a variety of architecturally styled mounting brackets, providing exceptional photometric performance; for up to to years of exceptional life. The new redesigned Premier II is now available with up to LEs; clean architectural lines, and seamless mounting options; in an economical architectural package suitable for a multitude of architectural projects. rchitectural LE advantages Never before have architectural fixtures been able to perform to the photometric levels that are now available due to the optical designs utilizing the new LE light sources. High lumen output LEs combined with specially designed optics; provide unprecedented light levels for all types of architectural projects.

3 pex Project Name: LE atalog Number: imensional rawings PX- 6 The new pex LE Series offers clean, functional styling that blends with a broad range of architecture. The cast aluminum housing with integrated pole top fitter anchors aluminum mounting rods to support the cast aluminum shade that houses the LE light engine. The LE s performance and the driver s life are maximized by enclosing them in the two separate compartments. It combines LE performance and advanced LE thermal management technology and provides outdoor area lighting that is both energy efficient and aesthetically pleasing. Model PX- Optics II (T) Source urrent # of LEs m () 6 (6L) III (T) 8 Kelvin K *Warm white (K) K *Neutral white (K) () K (8L) *ool white (K) IV RHITETRL Voltage -77 *niversal voltage (NV) 8 () 7 (8) 9 6 The LE light assemblies come with 6 or 8 LE s. Five optical distribution patterns are available. hoose between, or Kelvin temperature of the LE s. durable polyester powder coat finish is guaranteed for five years; and is available in standard or custom colors. The pex LE series is an exceptional choice for college campus s, architectural buildings, and many other architectural projects that want to use sustainable LE lighting. Post Top Slips Over O.. x Tall Tenon (onsult Factory For Other Sizes) (PT) rm Mount * Works only with arm mount V, V, V (M) Finish White (WH) Smooth White (SWH) lack (K) Smooth lack (SK) ronze (T) (Z) Forest reen (F) V Silver Metallic (T) (SL) raphite (P) V-W (TW) Weathered rown (W) EP ata PX- For double assemblies, see the decorative mounting arm section. Max. Watts Lbs Lbs 6W Soft old (S) ustom olor utton Photocell (P) (P) (P8) (P77) -v imming river No ontrols (IM) imming/ontrols onsult Factory Motion Sensor/ontrol Watt Stopper FSP- 8 L HT Must specify imming river. (WS) This option will require() FSIR remote for programing Motion Sensor 8 L HT Must specify imming river. an use with Wireless ontrol (MS) Wireless ontrol *onsult Factory *Wireless control 6L only () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 7

4 pex Housing and oor ssembly Precision-formed, corrosion-resistant, die cast aluminum housing and two-piece door assembly with tool-less access. LE Electrical ssembly The pex LE series is supplied with a choice of or m high-performance LE drivers that accept v thru 8v, Hz to 6 Hz, input. Power factor of 9%. Rated for - operations. rm/river ompartment urable two-piece die cast aluminum driver compartment opens for easy access to removable driver for ease of maintenance and allowing for cooler driver operation. Preassembled to fixture housing and sealed with one-piece silicone gasket. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Thermal Management The pex series provides excellent thermal management by mounting the LE s to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LE life. The L7 test determines the point in an LEs life when it reaches 7 percent of its initial output. The pex series LE s have been determined to last,+ hours in environments when driven at m. utton type photocell -v imming river imming ontrols Motion Sensor/ontrol - Watt Stopper FSP- Optical System The highest lumen output LEs are utilized in the pex series. IES distribution s II, III, IV, V and V-W are available. The optical system qualifies as IES full cutoff; to restrict light trespass, glare and light pollution. RI values are 7. Motion Sensor Wireless ontrol Listings The pex is L listed, suitable for wet locations. Quali-uard Finish The finish is a Quali-uard textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of - mil thickness. Finish is oven-baked at º F to promote maximum adherence and finish hardness. ll finishes are available in standard and custom colors. Finish is guaranteed for five () years. Powder oated Tough. LM79 and LM8. IP66 RoHS compliant. IP66 Rated rms V V S S S # OF LES 6 8 RIVE RRENT (m) TOTL LMENS (lm) WTTE (W) TYPE OPTIS TYPE OPTIS TYPE OPTIS TYPE OPTIS TYPE W OPTIS 7,97 6,6 7,87 8,9 8,6 79,8 9,6,8,9,78,,97,,9 6,, 8,9,,67,8 6 Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.98 * For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: () RHITETRL V

5 ross ow Project Name: LE atalog Number: imensional rawings. The ross ow LE Series continues the unique contemporary design inspired by the sleek styling of the ow family. Separating the river(s) from the individual die-cast aluminum linear LE engines: optimize the life of the LEs and the river(s); and maximizes the lumen output of the fixture. The LE light assemblies come in multiples of LEs; and are offered in up to 6 LE s. Model Model -OW- 9 FT. (9) FT. () RHITETRL FT. () Optics I (T) II (T) III (T) IV (T) Max. Watts -ow- Single.. 9 -ow- ouble.. Six optical distribution patterns are available. hoose between, or Kelvin temperature of the LE s. durable polyester powdercoat finish is guaranteed for five years; and is available in standard or custom colors. The ross ow LE series is an exceptional choice for pedestrian scale lighting applications. Source urrent Kelvin Voltage K -77 nchor ase # of LEs m *Warm white *niversal -OW- voltage (K) () () (NV) (NHOR OLT KIT SPPLIE) (L) *Single 6 (6L) *ouble () 7 (7) () K K *ool white (K) (Z) lack (K) *Neutral white (K) Finish ronze -OW- omes standard with a x base cover. Smooth lack (SK) White (WH) Smooth White (SWH) raphite V (P) (T) rey V-W Silver Metallic (TW) utton Photocell (P) (P) (P8) (P77) Wireless ontrol onsult Factory (W) imming ontrol onsult Factory -v imming river No ontrols (IM) ual ircuit *oubles Only () (Y) (SL) ustom olor () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 7

6 ross ow LE Housing The LE light engines are constructed of heavy-duty, die-cast aluminum, with external heat radiating fins. The extruded pole contains the driver(s), allowing for cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for weather tight operation. Electrical ssembly The ross OW Series is supplied with a choice of,, 7 to m highperformance LE drivers that accept v, Hz to 6 Hz, input. Thermal Management The ross ow Series provides excellent overall thermal management by maximizing the fixture s heat sink capabilities. This enables the ross ow Series to withstand higher ambient temperatures and drive currents without degrading LE life. The ross OW Series has a very low thermal resistance rating. The L7 test determines the point in an LEs life when it reaches 7 percent of its initial output. The ross ow Series LEs have been determined to last a minimum of, hours in environments when driven at m. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit Optical System The highest lumen output LEs are utilized in the ross ow Series. IES distribution s I, II, III, IV, V and V-W are available. LE light assemblies come with LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution. RI values are 7. Quali-uard Finish The finish is a Quali-uard textured, chemically pretreated through a multiplestage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of - mil thickness. Finish is oven-baked at º F to promote maximum adherence and finish hardness. ll finishes are available in standard and custom colors. Finish is guaranteed for five () years kv surge protector supplied as standard. utton Photocell Wireless ontrol imming ontrol -v imming river ual ircuit Listings ross ow Series is cl listed, suitable for wet locations. LM79 and LM8 RoHS compliant IP66 Rated L Listed Powder oated Tough The ross ow Luminaire is easily attached to the pole by tamper-proof countersunk screws. It also comes standard with a x base cover. IP66 SE ETIL ase Template: luminum Shaft " Square for / nchor olts Represents Typical ross Section: Footing shown is recommended, however job specifications may require larger footings or rebar. Scale: : WITH LEVELIN NTS Represents Typical ross Section: Footing shown is recommended, however job specifications may require larger footings or rebar.. MIN. MX WITHOT LEVELIN NTS ross ow K Lumen ata # Of Sides # Of LEs 6 m W Wattage Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: () RHITETRL.7 MIN. MX

7 V-ollard Project Name: LE atalog Number: imensional rawings The new V-ollard LE Series continues the unique contemporary design inspired by the sleek styling of the V ollection. Separating the river(s) from the individual cast aluminum LE engines: optimize the life of the LEs and the river(s); and maximizes the lumen output of the fixture. The LE light assemblies come in multiples of 6, or 8 LEs; and are offered in up to LE s. Model Height VL- 9 FT. (9) FT. () FT. () Optics I (T) II (T) III RHITETRL (T) IV (T) V (T) V-W (TW) Max. LEs Lbs VL- Single VL- ouble. Six optical distribution patterns are available. hoose between, or Kelvin temperature of the LE s. durable polyester powdercoat finish is guaranteed for five years; and is available in standard or custom colors. The V-ollard LE series is an exceptional choice for low level or pedestrian scale lighting applications. Source onfig. urrent Kelvin Voltage K Single # of LEs m -77 nchor ase *Warm white *niversal (S) 6 voltage (K) (6L) *Not vailable in double configuration (L) 8 (8L) *Not vailable in double configuration () ouble () () 7 (7) * () (NV) K *Neutral white (K) K *ool white (K) 8 () Not available in 6L 7 (8) (NHOR OLT KIT SPPLIE) () Finish ronze (Z) lack (K) Smooth lack (SK) utton Photocell (P) (P) (P8) (P77) -v imming river No ontrols (IM) White (WH) Smooth White (SWH) raphite (P) 6 (6L) rey (Y) (L) Silver Metallic (SL) *m not available for 8L single or L double ustom olor () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 76

8 V-ollard LE Housing ast aluminum heatsink with integral cooling fins for thermal management. The extruded pole contains the driver(s), allowing for cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for weather tight operation. Electrical ssembly The V-ollard LE series is supplied with a choice of,, 7 or m high-performance LE drivers that accept v thru 8v, Hz to 6 Hz, input. Power factor of 9%. Rated for - operations. kv surge protector supplied as standard. Thermal Management The V-ollard Series provides excellent overall thermal management by maximizing the fixture s heatsink capabilities. This enables the V-ollard Series to withstand higher ambient temperatures and drive currents without degrading LE life. The V-ollard Series has a very low thermal resistance rating. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. utton Photocell -v imming river Listings V-ollard Series is L listed, suitable for wet locations. Powder oated Tough. The L7 test determines the point in an LEs life when it reaches 7 percent of its initial output. The V-ollard Series LEs have been determined to last a minimum of, hours in environments when driven at m. Optical System The highest lumen output LEs are utilized in the V-ollard Series. IES distribution s I, II, III, IV, V and V-W are available. LE light assemblies come in multiples of 6 LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution. RI values are 7. Quali-uard Finish The finish is a Quali-uard textured, chemically pretreated through a multiplestage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of - millimeter thickness. Finish is oven-baked at º F to promote maximum adherence and finish hardness. ll finishes are available in standard and custom colors. Finish is guaranteed for five () years The V-ollard Luminaire is easily attached to the pole by tamper-proof countersunk screws. K Lumen ata * hart updated Side Side 8 Side m TYPE TYPE TYPE TYPE TYPE TYPE W Watts RHITETRL # of LEs K Lumen ata 6 Side Side 8 Side Visit for up-to-the-minute chart information. *Multiply K Values by.9 for K Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

9 PRE--L Project Name: LE atalog Number: imensional rawings ontemporary design meets the new generation of LE green technology in this stunning lumenaire, the PRE--L. The Premier II series provides up to fifty percent energy savings over traditional HI light sources; and offers excellent beam control and LE life beyond, hours for milliamp systems. The PRE--L is offered in six optical distributions. Max. LEs Lbs PRE--L (PT) The PRE--L fixture is built with a cast aluminum housing, extruded aluminum arms and a spun aluminum, removable top. The popular PRE--L is the perfect compliment to any university campus, business park, or walkway project where contemporary, architectural design is desired. The PRE--L s fully-sealed housing features an exceptionally well-designed thermal management system that provides superior heat dissipation. Model Optics Source PRE--L I # of LEs (T) RHITETRL II (T) II III -R -R III III (T) IV IV -R (T) V - (T) (L) 8 (8L) IV 6 (6L) 8 V - (8L) Milliamps m Kelvin Voltage K -77 *Warm white *Neutral white () () 7 V (7) (K) K (K) K *ool white (K) *niversal voltage (NV) 8 () 7 (8) Post Top ronze utton Photocell (PT) lack (P) (P8) (P) (P77) Smooth lack -v imming river *Slips over Ø tenon x tall Finish (Z) (K) (SK) White (WH) Smooth White (SWH) W raphite (P) (L) +LS W rey (Y) V-W +LS (TW) Silver Metallic (SL) EP ata PRE--L Post Top. Weathered rown (W) No ontrols (IM) Motion Sensor/ontrol Watt Stopper FSP- 8 L HT Must specify imming river. (WS) This option will require() FSIR remote for programing Motion Sensor 8 L HT (MS) Wireless ontrol (W) onsult Factory ustom olor () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 78

10 Premier II Large Housing The PRE--L s housing is constructed from durable, corrosion resistant, cast aluminum. The spun aluminum top cap is.8 gauge, and easily removable for service. Silicone gasketing is provided for complete weather and insect protection. LE Electrical ssembly The PRE--L is supplied with a high-performance driver available in, and 7 m. The driver is integrally-located in the housing, and is operational from V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for -o to operation. kv surge protector supplied as standard. Thermal Management The PRE--L provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the Premier II to withstand higher ambient temperatures and higher drive currents without degrading LE life. Optical System The hightest lumen output LEs are utilized. High performance acrylic optics feature industry leading I, II, III, IV, V and V-W optical distributions. crylic optics are impact-resistant and rated to 9 percent translucence. L7 life of our LEs is rated over, hours (for m), The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. RI values are 7. Quali-uard Finish components are chemically pretreated through a multiple stage washer, and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. Post Top Mount The PRE--L s contractor-friendly mounting hardware slips over or O.. x tall tenon utilizing stainless steel hardware. Round Internal Tenon daptors (RIT) are recommended for a smooth-looking connection. Standard for poles, custom size required for or poles. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. utton type photocell -v imming river WattStopper FSP- Motion Sensor Wireless ontrol Please consult factory for detailed custom options. Listings PRE--L is cl listed L Listed I ertification IP6 Rated LM79 and LM8 Powder oated ToughTM IP6 RTE esignlights onsortium (L) qualified Product. Some configurations of this product family may not be esignlights onsortium (L) listed, please refer to the L qualified products list to confirm listed configurations. K must be selected for I certification. m LPW LPW LPW LPW LPW W LPW Watts RHITETRL PRE--L K Lumen ata *Lumen chart updated..7 # LEs PRE--L K Lumen ata Visit for up-to-the-minute chart information. For K lumen ata Multiply K by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

11 PRE--M Project Name: LE atalog Number: imensional rawings ontemporary design meets the new generation of LE green technology in this stunning lumenaire, the PRE--M. The PRE--M series provides up to fifty percent energy savings over traditional HI light sources; and offers excellent beam control and LE life beyond, hours for milliamp systems. The PRE--M is offered in six optical distributions. Max. LEs Lbs PRE--M The PRE--M fixture is built with a cast aluminum housing, extruded aluminum arms and a spun aluminum, removable top. The popular PRE--M is the perfect compliment to any university campus, business park, or walkway project where contemporary, architectural design is desired. The PRE--M s fully-sealed housing features an exceptionally welldesigned thermal management system that provides superior heat dissipation. Model Optics Source PRE--M I # of LEs (T) II (T) II III -R -R III III (T) IV IV -R (T) V - (T) 6 (6L) (L) IV 8 (8L) V - Milliamps m () () 7 V (7) Kelvin Voltage K -77 *Warm white (K) K *Neutral white (K) K *ool white (K) Post Top ronze utton Photocell (PT) lack (P) (P8) (P) (P77) () Smooth lack -v imming river 7 White *niversal voltage (NV) 8 (8) *Slips over Ø tenon x tall Finish (Z) (K) (SK) (WH) Smooth White (SWH) W raphite (P) +LS W rey No ontrols (IM) Motion Sensor *Works with FSP- (WS-8) 8 Height (WS-) 9- Height (WS-) - Height This option will require() FSIR remote for programing (Y) V-W +LS (TW) Silver Metallic (SL) Weathered rown EP ata PRE--M.88 Wireless ontrol (W) onsult Factory (W) ustom olor () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 8

12 Premier II Medium Housing The PRE--M s housing is constructed from durable, corrosion resistant, cast aluminum. The spun aluminum top cap is.8 gauge, and easily removable for service. Silicone gasketing is provided for complete weather and insect protection. Thermal Management The PRE--M provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the PRE--M to withstand higher ambient temperatures and higher drive currents without degrading LE life. Optical System The hightest lumen output LEs are utilized. High performance acrylic optics feature industry leading I, II, III, IV, V and V-W optical distributions. crylic optics are impact-resistant and rated to 9 percent translucence. L7 life of our LEs is rated over, hours (for m), The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. RI values are 7. Quali-uard Finish components are chemically pretreated through a multiple stage washer, and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. LE Electrical ssembly The PRE--M is supplied with a high-performance driver available in, and 7 m. The driver is integrally-located in the housing, and is operational from V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for -o to operation. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. utton type photocell -v imming river WattStopper FSP- Motion Sensor Wireless ontrol Please consult factory for detailed custom options. Listings PRE--M is cl listed L Listed I ertification IP6 Rated LM79 and LM8 Powder oated ToughTM Post Top Mount The PRE--M s contractor-friendly mounting hardware slips over or O.. x tall tenon utilizing stainless steel hardware. Round Internal Tenon daptors (RIT) are recommended for a smooth-looking connection. Standard for poles, custom size required for or poles. IP6 RTE esignlights onsortium (L) qualified Product. Some configurations of this product family may not be esignlights onsortium (L) listed, please refer to the L qualified products list to confirm listed configurations. K must be selected for I certification. PRE--M K Lumen ata *Lumen chart updated..7 # LEs m LPW LPW LPW LPW LPW W LPW Watts PRE--M K Lumen ata PRE--M K Lumen ata Visit for up-to-the-minute chart information. Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

13 alifornia ria Size LE Project Name: atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. F imensional rawings E L--L SIZE L--L L--L 7½ L-." Max. LEs Lbs 8 NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. INTERPRET EOMETRI TOLERNIN PER: MTERIL eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. The alifornia ria LE offers excellent control and an exceptionally long life. Our high-efficiency light engines house our latest LEs for a RI of 7, and increased energy savings. vailable in,,, or Kelvin. The alifornia ria s fully-sealed housing features an exceptionally well-designed thermal management system that provides superior heat dissipation. The alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. Tool-less entry makes this luminaire s maintenance a breeze. II (T) (8L) 6 III RHITETRL (T) (6L) 8 (8L) IV (T) (L) () () *Neutral white 8 (K) () K 7 *ool white (K) (8) Finish ronze (Z) (T) Finials with special threaded mounting plate. lack Requires special tenon adaptor if poles are not Visionaire Lighting poles. (K) (FIN) (FIN) (FIN) (FIN) White utton Photocell (PT) (WH) Forest reen (F) rey No. No. No. No. (P) (P8) (P) (P77) utoff Louver System (LS) (Y) imming/ontrols Silver Metallic - V imming river (SL) V The alifornia ria is a perfect compliment to any shopping center, park, walkway or boardwalk environment. (NV) K 6 This post top luminaire is a IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. Model Optics # of LEs Milliamps Source Kelvin Voltage I m LE K -77 Post Top L--L (T) *Slips over Ø (L) (LE) *Warm white *niversal voltage tenon ½ tall (K) 8 Verdigris *onsult factory *No controls (IM) (V) V-W Weathered rown (TW) (W) ustom olor LE - Light Emitting iode () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 8 SE ON NEXT SSY 7 8 PPLITION NME RWN PEREZ HEKE EN PPR. MF PPR. Q.. OMMENTS: FINISH O NOT SLE RWIN

14 Housing ie cast aluminum fixture housing is diameter with integral tool-less push latch sealing mechanism. Housing features a choice of five heavyduty, spun aluminum tops. Thermal Management The alifornia ria provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the alifornia ria to withstand higher ambient temperatures and higher drive currents without degrading LE life. oor Frame ie cast aluminum door frame incorporates one-piece silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for access to the LEs; and is supported with a hinge and latch mechanism. Silicone gasket for complete weather and insect protection. Optical System The highest lumen output LEs are utilized. The L7 test determines the point in an LE s life when it reaches 7 percent of its initial output LEs have been determined to last a minimum of, hours in o environments when driven at m. RI values are 7. IES distributions s I, II, III, IV, V and V-W are standard. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. Quali-uard Finish components are chemically pretreated through a multiple stage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. alifornia ria Size LE Post Top Mount The alifornia ria s contractor-friendly mounting hardware is concealed inside the post-top fitter; which slips over O.. x / tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Electrical ssembly The alifornia ria LE series is supplied with a high-performance LE driver, that accepts V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Finials utton type photocell utoff louver system - V dimming driver Please consult factory for detailed custom options. Listings alifornia ria is ETL listed, suitable for wet locations. LM79 and LM8. Powder oated ToughTM. RoHS compliant. IP-6 IP6 RTE Housing Shades EP ata EP ata Only L--L L--L FIN L--L FIN L--L FIN L--L NO FINIL RHITETRL L--L NO FINIL. LE ata hart for K* Lumen data subject to change without notice # LEs Output m -W System Watts Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9. For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

15 alifornia ria Size LE Project Name: atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. imensional rawings F E.7 SIZE L- L--L L--L L--L." Max. LEs Lbs 7⅛ 6 8 NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. INTERPRET EOMETRI TOLERNIN PER: eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. The alifornia ria LE offers excellent control and an exceptionally long life. Our high-efficiency light engines house our latest LEs for a RI of 7, and increased energy savings. vailable in,,, or Kelvin. The alifornia ria s fully-sealed housing features an exceptionally well-designed thermal management system that provides superior heat dissipation. The alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. Tool-less entry makes this luminaire s maintenance a breeze. II (T) (8L) 6 III RHITETRL (T) (6L) 8 (8L) IV (T) (L) () () *Neutral white 8 (K) () K 7 *ool white (K) (8) Finish ronze (Z) with special threaded mounting plate. lack Requires special tenon adaptor if poles are not Visionaire Lighting poles. White (PT) (K) (WH) Forest reen (F) rey (Y) Silver Metallic (SL) V (T) The alifornia ria is a perfect compliment to any shopping center, park, walkway or boardwalk environment. (NV) K 6 This post top luminaire is a IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. Model Optics # of LEs Milliamps Source Kelvin Voltage m LE K -77 Post Top L--L I (T) *Slips over Ø (LE) *Warm white *niversal (L) voltage tenon ½ tall (K) 8 Verdigris Finials No. No. No. No. (FIN) (FIN) (FIN) (FIN) utton Photocell (P) (P8) (P) (P77) utoff Louver System (LS) imming/ontrols *onsult factory - V imming river *No controls (IM) (V) V-W Weathered rown (TW) LE - Light Emitting iode (W) ustom olor () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 8 MTERIL SE ON NEXT SSY 7 8 PPLITION NME RWN PEREZ HEKE EN PPR. MF PPR. Q.. OMMENTS: FINISH O NOT SLE RWIN

16 Housing ie cast aluminum fixture housing is diameter with integral tool-less push latch sealing mechanism. Housing features a choice of five heavyduty, spun aluminum tops. Thermal Management The alifornia ria provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the alifornia ria to withstand higher ambient temperatures and higher drive currents without degrading LE life. oor Frame ie cast aluminum door frame incorporates one-piece silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for access to the LEs; and is supported with a hinge and latch mechanism. Silicone gasket for complete weather and insect protection. Optical System The highest lumen output LEs are utilized. The L7 test determines the point in an LE s life when it reaches 7 percent of its initial output LEs have been determined to last a minimum of, hours in o environments when driven at m. RI values are 7. IES distributions s I, II, III, IV, V and V-W are standard. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. Quali-uard Finish components are chemically pretreated through a multiple stage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. alifornia ria Size LE Post Top Mount The alifornia ria s contractor-friendly mounting hardware is concealed inside the post-top fitter; which slips over O.. x / tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Electrical ssembly The alifornia ria LE series is supplied with a high-performance LE driver, that accepts V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Finials utton type photocell utoff louver system - V dimming driver Please consult factory for detailed custom options. Listings alifornia ria is ETL listed, suitable for wet locations. LM79 and LM8. Powder oated ToughTM. RoHS compliant. IP-6 IP6 RTE Housing Shades EP ata EP ata Only L--L FIN L--L FIN L--L FIN L--L L--L NO FINIL. RHITETRL L--L NO FINIL LE ata hart for K* Lumen data subject to change without notice # LEs Output m -W System Watts Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9. For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

17 alifornia ria Size LE Project Name: atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. imensional rawings F E 9. SIZE L--L L--L L--L L-." ¾.7 6. LEs. Max. Lbs NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. The alifornia ria LE offers excellent control and an exceptionally long life. Our high-efficiency light engines house our latest LEs for a RI of 7, and increased energy savings. vailable in,,, or Kelvin. The alifornia ria s fully-sealed housing features an exceptionally well-designed thermal management system that provides superior heat dissipation. The alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. Tool-less entry makes this luminaire s maintenance a breeze. II (T) (8L) 6 III RHITETRL (T) (6L) 8 (8L) IV (T) (L) () () *Neutral white 8 (K) () K 7 *ool white (K) (8) Finish ronze (Z) with special threaded mounting plate. lack Requires special tenon adaptor if poles are not Visionaire Lighting poles. White (PT) (K) (WH) Forest reen (F) rey (Y) Silver Metallic (SL) V (T) The alifornia ria is a perfect compliment to any shopping center, park, walkway or boardwalk environment. (NV) K 6 This post top luminaire is a IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. Model Optics # of LEs Milliamps Source Kelvin Voltage m LE K -77 Post Top L--L I (T) *Slips over Ø (LE) *Warm white *niversal (L) voltage tenon ½ tall (K) Verdigris Finials No. No. No. No. (FIN) (FIN) (FIN) (FIN) utton Photocell (P) (P8) (P) (P77) utoff Louver System (LS) imming/ontrols *onsult factory - V imming river *No controls (IM) (V) V-W Weathered rown (TW) (W) ustom olor LE - Light Emitting iode () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 86 INTERPRET EOMETRI TOLERNIN PER: MTERIL SE ON NEXT SSY PPLITION RWN HEKE EN PPR. MF PPR. Q.. OMMENTS: FINISH O NOT SLE RWIN

18 Housing ie cast aluminum fixture housing is diameter with integral tool-less push latch sealing mechanism. Housing features a choice of five heavyduty, spun aluminum tops. Thermal Management The alifornia ria provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the alifornia ria to withstand higher ambient temperatures and higher drive currents without degrading LE life. oor Frame ie cast aluminum door frame incorporates one-piece silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for access to the LEs; and is supported with a hinge and latch mechanism. Silicone gasket for complete weather and insect protection. Optical System The highest lumen output LEs are utilized. The L7 test determines the point in an LE s life when it reaches 7 percent of its initial output LEs have been determined to last a minimum of, hours in o environments when driven at m. RI values are 7. IES distributions s I, II, III, IV, V and V-W are standard. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. Quali-uard Finish components are chemically pretreated through a multiple stage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. alifornia ria Size LE Post Top Mount The alifornia ria s contractor-friendly mounting hardware is concealed inside the post-top fitter; which slips over O.. x / tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Electrical ssembly The alifornia ria LE series is supplied with a high-performance LE driver, that accepts V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Finials utton type photocell utoff louver system - V dimming driver Please consult factory for detailed custom options. Listings alifornia ria is ETL listed, suitable for wet locations. LM79 and LM8. Powder oated ToughTM. RoHS compliant. IP-6 IP6 RTE Housing Shades EP ata EP ata Only L--L FIN L--L FIN L--L FIN L--L L--L NO FINIL. RHITETRL L--L NO FINIL LE ata hart for K* Lumen data subject to change without notice # LEs Output m -W System Watts Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9. For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

19 alifornia ria Size LE Project Name: atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. F imensional rawings E. SIZE L--L eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. The alifornia ria LE offers excellent control and an exceptionally long life. Our high-efficiency light engines house our latest LEs for a RI of 7, and increased energy savings. vailable in,,, or Kelvin. The alifornia ria s fully-sealed housing features an exceptionally well-designed thermal management system that provides superior heat dissipation. L--L II (T) (8L) 6 III RHITETRL (T) (6L) 8 (8L) IV (T) (L) 7 () 7 (8) with special threaded mounting plate. Requires special tenon adaptor if poles are not Visionaire Lighting poles. (PT) Finish ronze (Z) lack (K) White (WH) Forest reen (F) rey (Y) Silver Metallic (SL) V (T) Lbs 8 9 NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. 6 The alifornia ria is a perfect compliment to any shopping center, park, walkway or boardwalk environment. 8 (K) Max. LEs This post top luminaire is a IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. K *ool white 8.87 Verdigris Finials No. No. No. No. (FIN) (FIN) (FIN) (FIN) utton Photocell (P) (P8) (P) (P77) utoff Louver System (LS) imming/ontrols *onsult factory - V imming river *No controls (IM) (V) V-W Weathered rown (TW) (W) ustom olor LE - Light Emitting iode () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 88 INTERPRET EOMETRI TOLERNIN PER: MTERIL SE ON PPLITION K NEXT SSY (NV) (K) 8⅞ 8 () *Neutral white." The alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. Tool-less entry makes this luminaire s maintenance a breeze. (K) () L- Model Optics # of LEs Milliamps Source Kelvin Voltage m LE K -77 Post Top L--L I (T) *Slips over Ø (LE) *Warm white *niversal (L) voltage tenon ½ tall 8 L--L RWN HEKE EN PPR. MF PPR. Q.. OMMENTS: FINISH O NOT SLE RWIN NME TE PEREZ 9

20 Housing ie cast aluminum fixture housing is diameter with integral tool-less push latch sealing mechanism. Housing features a choice of five heavyduty, spun aluminum tops. Thermal Management The alifornia ria provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the alifornia ria to withstand higher ambient temperatures and higher drive currents without degrading LE life. oor Frame ie cast aluminum door frame incorporates one-piece silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for access to the LEs; and is supported with a hinge and latch mechanism. Silicone gasket for complete weather and insect protection. Optical System The highest lumen output LEs are utilized. The L7 test determines the point in an LE s life when it reaches 7 percent of its initial output LEs have been determined to last a minimum of, hours in o environments when driven at m. RI values are 7. IES distributions s I, II, III, IV, V and V-W are standard. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. Quali-uard Finish components are chemically pretreated through a multiple stage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. alifornia ria Size LE Post Top Mount The alifornia ria s contractor-friendly mounting hardware is concealed inside the post-top fitter; which slips over O.. x / tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Electrical ssembly The alifornia ria LE series is supplied with a high-performance LE driver, that accepts V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Finials utton type photocell utoff louver system - V dimming driver Please consult factory for detailed custom options. Listings alifornia ria is ETL listed, suitable for wet locations. LM79 and LM8. Powder oated ToughTM. RoHS compliant. IP-6 IP6 RTE Housing Shades EP ata EP ata Only L--L L--L FIN L--L FIN L--L FIN L--L NO FINIL RHITETRL L--L NO FINIL. LE ata hart for K* Lumen data subject to change without notice # LEs Output m -W System Watts Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9. For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

21 alifornia ria Size LE Project Name: atalog Number: imensional rawings L--L L--L eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. The alifornia ria LE offers excellent control and an exceptionally long life. Our high-efficiency light engines house our latest LEs for a RI of 7, and increased energy savings. vailable in,,, or Kelvin. The alifornia ria s fully-sealed housing features an exceptionally well-designed thermal management system that provides superior heat dissipation. Max. LEs Lbs L--L 9¾ The alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. Tool-less entry makes this luminaire s maintenance a breeze. This post top luminaire is a IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. The alifornia ria is a perfect compliment to any shopping center, park, walkway or boardwalk environment. Model Optics # of LEs Milliamps Source Kelvin Voltage m LE K -77 Post Top L--L I (T) *Slips over Ø (LE) *Warm white *niversal (L) voltage tenon ½ tall (K) II (T) 8 (8L) 6 III RHITETRL (T) (6L) 8 (8L) IV (T) (L) () () (NV) K *Neutral white 8 (K) () K 7 *ool white (K) (8) Finish ronze (Z) lack Requires special tenon adaptor if poles are not Visionaire Lighting poles. (K) (FIN) (FIN) (FIN) (FIN) White utton Photocell (PT) (WH) Forest reen (F) rey (Y) (SL) (T) Finials with special threaded mounting plate. Silver Metallic V Verdigris No. No. No. No. (P) (P8) (P) (P77) utoff Louver System (LS) imming/ontrols *onsult factory - V imming river *No controls (IM) (V) V-W Weathered rown (TW) LE - Light Emitting iode (W) ustom olor () For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 9

22 Housing ie cast aluminum fixture housing is diameter with integral tool-less push latch sealing mechanism. Housing features a choice of five heavyduty, spun aluminum tops. Thermal Management The alifornia ria provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the alifornia ria to withstand higher ambient temperatures and higher drive currents without degrading LE life. oor Frame ie cast aluminum door frame incorporates one-piece silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for access to the LEs; and is supported with a hinge and latch mechanism. Silicone gasket for complete weather and insect protection. Optical System The highest lumen output LEs are utilized. The L7 test determines the point in an LE s life when it reaches 7 percent of its initial output LEs have been determined to last a minimum of, hours in o environments when driven at m. RI values are 7. IES distributions s I, II, III, IV, V and V-W are standard. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. Quali-uard Finish components are chemically pretreated through a multiple stage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for five () years. alifornia ria Size LE Post Top Mount The alifornia ria s contractor-friendly mounting hardware is concealed inside the post-top fitter; which slips over O.. x / tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Electrical ssembly The alifornia ria LE series is supplied with a high-performance LE driver, that accepts V through 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. kv surge protector supplied as standard. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. Finials utton type photocell utoff louver system - V dimming driver Please consult factory for detailed custom options. Listings alifornia ria is ETL listed, suitable for wet locations. LM79 and LM8. Powder oated ToughTM. RoHS compliant. IP-6 IP6 RTE Housing Shades EP ata EP ata Only L--L FIN L--L FIN L--L FIN L--L L--L NO FINIL.9 RHITETRL L--L NO FINIL LE ata hart for K* Lumen data subject to change without notice # LEs Output m -W System Watts Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9. For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

23 Project Name: alifornia ria Size HI atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. F imensional rawings E L- L- 7½ SIZE L- L-." Max. Watts. W Lbs NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. Offered with the high-efficiency Pulse Start Metal Halide or High Pressure Sodium HI light sources; this is an efficient and tasteful solution for any lighting application. The alifornia ria HI series features the most advanced lighting reflector system available today. The vertical-burn Vision Reflector System is a revolutionary patented reflector that allows for the use of fewer fixtures and poles with wider spacing, providing substantial equipment, installation and energy cost savings. Model L- Optics II (T) Wattage HI 7 III () PS (T) RHITETRL IV (T) V (T) (7) () () () Source PS *Reduced Envelope W () (P) () 8 () (S) This post top luminaire is a flat lens, IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. The alifornia ria is a perfect compliment to any roadway, shopping center, park, walkway or boardwalk environment. Post Top *Slips over Ø tenon ½ tall with special threaded mounting plate. Requires special tenon adaptor if poles are not Visionaire Lighting poles. Finish ronze (Z) lack Finials No. No. No. No. (K) (FIN) (FIN) (FIN) (FIN) White utton Photocell 77 Forest reen (P) (P8) (P) (P77) 8 Silver Metallic Single in-line fuse () () () () Voltage alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. M-Tap *Multi-Tap ballast wired at 77 V unless specified (6) 7 (8) (PT) (WH) (F) Fusing (SL) (SF) (SF77) Weathered rown (F8) (F) (F8) (W) Soft old ouble in-line fuse Internal Light Shield (ILS) (S) ustom olor () PS - Pulse Start Metal Halide HPS - High Pressure Sodium For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 9 INTERPRET EOMETRI TOLERNIN PER: MTERIL SE ON NEXT SSY PPLITION FINISH O NOT SLE RWIN R H EN MF Q. O

24 alifornia ria Housing ie cast aluminum fixture housing is diameter with integral toolless push latch sealing mechanism. housing encloses the lamp and Vision reflector components exclusively. oor Frame & Lens ie cast aluminum door frame incorporates a one-piece, silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for direct access to the lamp; and is supported with a hinge and latch mechanism. Lens is clear, tempered flat glass, fully gasketed with a one-piece, extruded silicone gasket for complete weather and insect protection. Vision Optical System Patented Vision series high performance, multifaceted, segmented, 9% reflectance, anodized aluminum reflectors. Vertical lamp reflectors available in four () distribution patterns (II, III, IV and V). Quali-uard Finish components are chemically pretreated through a multiplestage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for two () years. Size HI allast ssembly Modular ballast assembly is mounted to the cast aluminum fitter; and is removable without the use of tools. Quick disconnect(s) supplied for incoming power and to the lamp, for ease of installation and maintenance. HI ballasts are HPF regulating autotransformers rated at - ºF. vailable in Pulse Start Metal Halide and High Pressure Sodium. Finials utton type photocell Fusing Internal light shield Please consult factory for custom options. Listings alifornia ria is ETL listed, suitable for wet locations. E IS compliant.. Powder oated ToughTM VisionTM Reflector System (.S. Patent No. 7,,98). Post Top Tenon Fitter Post Top Mount: The cast aluminum post top mount fitter houses the ballast assembly. The contractor-friendly mounting hardware is concealed inside the post top fitter; which slips over O.. x tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Housing Shades / Finial s L- / FIN L- / FIN L- / FIN L- / NO FINIL RHITETRL L- / NO FINIL Isolux urves LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS.. Scale: Square = ft Initial Light Loss Factor =. Height = ft rrangement = Single LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS..... VISIONIRE LIHTIN LIFORNI RI RI-T-PS "I. X "H. OTOOR LIHTIN FIXTRE TYPE V SEMENTE SPELR N HMMERTON REFLETOR FLT TEMPERE LSS LENS MP//ME Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Horizontal Footcandles Scale: Inch = 6 Ft. Light Loss Factor =. Total Lumens Per Luminaire = 8 Height = 6. Ft Maximum alculated Value =. Fc rrangement: Single rm Length =. Ft Page Scale: Square = 6 ft Initial Light Loss Factor =. Height = 6 ft rrangement = Single EP ata Only L-. Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

25 Project Name: alifornia ria Size HI atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. imensional rawings F E.7 SIZE L- L- L-." Max. Watts Lbs L- 7⅛ 6 W NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. Offered with the high-efficiency Pulse Start Metal Halide or High Pressure Sodium HI light sources; this is an efficient and tasteful solution for any lighting application. The alifornia ria HI series features the most advanced lighting reflector system available today. The vertical-burn Vision Reflector System is a revolutionary patented reflector that allows for the use of fewer fixtures and poles with wider spacing, providing substantial equipment, installation and energy cost savings. Model L- Optics II (T) Wattage HI 7 III () PS (T) RHITETRL IV (T) V (T) (7) () () () Source PS *Reduced Envelope W () (P) () 8 () (S) This post top luminaire is a flat lens, IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. The alifornia ria is a perfect compliment to any roadway, shopping center, park, walkway or boardwalk environment. Post Top *Slips over Ø tenon ½ tall with special threaded mounting plate. Requires special tenon adaptor if poles are not Visionaire Lighting poles. Finish ronze (Z) lack Finials No. No. No. No. (K) (FIN) (FIN) (FIN) (FIN) White utton Photocell 77 Forest reen (P) (P8) (P) (P77) 8 Silver Metallic Single in-line fuse () () () () Voltage alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. M-Tap *Multi-Tap ballast wired at 77 V unless specified (6) 7 (8) (PT) (WH) (F) Fusing (SL) (SF) (SF77) Weathered rown (F8) (F) (F8) (W) Soft old ouble in-line fuse Internal Light Shield (ILS) (S) ustom olor () PS - Pulse Start Metal Halide HPS - High Pressure Sodium For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 9 INTERPRET EOMETRI TOLERNIN PER: MTERIL SE ON NEXT SSY PPLITION FINISH O NOT SLE RWIN RWN HEKE EN PPR. MF PPR. Q.. OMMENTS:

26 alifornia ria Housing ie cast aluminum fixture housing is diameter with integral toolless push latch sealing mechanism. housing encloses the lamp and Vision reflector components exclusively. oor Frame & Lens ie cast aluminum door frame incorporates a one-piece, silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for direct access to the lamp; and is supported with a hinge and latch mechanism. Lens is clear, tempered flat glass, fully gasketed with a one-piece, extruded silicone gasket for complete weather and insect protection. Vision Optical System Patented Vision series high performance, multifaceted, segmented, 9% reflectance, anodized aluminum reflectors. Vertical lamp reflectors available in four () distribution patterns (II, III, IV and V). Quali-uard Finish components are chemically pretreated through a multiplestage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for two () years. Size HI allast ssembly Modular ballast assembly is mounted to the cast aluminum fitter; and is removable without the use of tools. Quick disconnect(s) supplied for incoming power and to the lamp, for ease of installation and maintenance. HI ballasts are HPF regulating autotransformers rated at - ºF. vailable in Pulse Start Metal Halide and High Pressure Sodium. Finials utton type photocell Fusing Internal light shield Please consult factory for custom options. Listings alifornia ria is ETL listed, suitable for wet locations. E IS compliant.. Powder oated ToughTM VisionTM Reflector System (.S. Patent No. 7,,98). Post Top Tenon Fitter Post Top Mount: The cast aluminum post top mount fitter houses the ballast assembly. The contractor-friendly mounting hardware is concealed inside the post top fitter; which slips over O.. x tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Housing Shades / Finial s L- / FIN L- / FIN L- / FIN L- / NO FINIL RHITETRL L- / NO FINIL Isolux urves LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS.. Scale: Square = ft Initial Light Loss Factor =. Height = ft rrangement = Single LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS..... VISIONIRE LIHTIN LIFORNI RI RI-T-PS "I. X "H. OTOOR LIHTIN FIXTRE TYPE V SEMENTE SPELR N HMMERTON REFLETOR FLT TEMPERE LSS LENS MP//ME Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Horizontal Footcandles Scale: Inch = 6 Ft. Light Loss Factor =. Total Lumens Per Luminaire = 8 Height = 6. Ft Maximum alculated Value =. Fc rrangement: Single rm Length =. Ft Page Scale: Square = 6 ft Initial Light Loss Factor =. Height = 6 ft rrangement = Single EP ata Only L-. Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

27 Project Name: alifornia ria Size HI atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. imensional rawings F E 9. SIZE L- eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. Offered with the high-efficiency Pulse Start Metal Halide or High Pressure Sodium HI light sources; this is an efficient and tasteful solution for any lighting application. The alifornia ria HI series features the most advanced lighting reflector system available today. The vertical-burn Vision Reflector System is a revolutionary patented reflector that allows for the use of fewer fixtures and poles with wider spacing, providing substantial equipment, installation and energy cost savings. Model L- Optics II (T) Wattage HI 7 III () PS (T) RHITETRL IV (T) V (T) (7) () () () Source PS *Reduced Envelope W () (P) () 8 () (S) L- L-." ¾.7 6.Watts. Max. 6 Lbs W 9 NLESS OTHERWISE SPE alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from This post top luminaire is a flat lens, IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. The alifornia ria is a perfect compliment to any roadway, shopping center, park, walkway or boardwalk environment. Post Top *Slips over Ø tenon ½ tall with special threaded mounting plate. Requires special tenon adaptor if poles are not Visionaire Lighting poles. Finish ronze (Z) lack Finials No. No. No. No. (FIN) (FIN) (FIN) (FIN) White utton Photocell 77 Forest reen (P) (P8) (P) (P77) 8 Silver Metallic Single in-line fuse () () M-Tap *Multi-Tap ballast wired at 77 V unless specified (6) 7 (8) (PT) (WH) (F) Fusing (SL) (SF) (SF77) Weathered rown (F8) (F) (F8) (W) Soft old ouble in-line fuse Internal Light Shield (ILS) (S) ustom olor () PS - Pulse Start Metal Halide HPS - High Pressure Sodium For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. (K) () () Voltage L- INTERPRET EOMETRI TOLERNIN PER: MTERIL SE ON NEXT SSY PPLITION FINISH O NOT SLE RWIN

28 alifornia ria Housing ie cast aluminum fixture housing is diameter with integral toolless push latch sealing mechanism. housing encloses the lamp and Vision reflector components exclusively. oor Frame & Lens ie cast aluminum door frame incorporates a one-piece, silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for direct access to the lamp; and is supported with a hinge and latch mechanism. Lens is clear, tempered flat glass, fully gasketed with a one-piece, extruded silicone gasket for complete weather and insect protection. Vision Optical System Patented Vision series high performance, multifaceted, segmented, 9% reflectance, anodized aluminum reflectors. Vertical lamp reflectors available in four () distribution patterns (II, III, IV and V). Quali-uard Finish components are chemically pretreated through a multiplestage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for two () years. Size HI allast ssembly Modular ballast assembly is mounted to the cast aluminum fitter; and is removable without the use of tools. Quick disconnect(s) supplied for incoming power and to the lamp, for ease of installation and maintenance. HI ballasts are HPF regulating autotransformers rated at - ºF. vailable in Pulse Start Metal Halide and High Pressure Sodium. Finials utton type photocell Fusing Internal light shield Please consult factory for custom options. Listings alifornia ria is ETL listed, suitable for wet locations. E IS compliant.. Powder oated ToughTM VisionTM Reflector System (.S. Patent No. 7,,98). Post Top Tenon Fitter Post Top Mount: The cast aluminum post top mount fitter houses the ballast assembly. The contractor-friendly mounting hardware is concealed inside the post top fitter; which slips over O.. x tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Housing Shades / Finial s L- / FIN L- / FIN L- / FIN L- / NO FINIL RHITETRL L- / NO FINIL Isolux urves LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS.. Scale: Square = ft Initial Light Loss Factor =. Height = ft rrangement = Single LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS..... VISIONIRE LIHTIN LIFORNI RI RI-T-PS "I. X "H. OTOOR LIHTIN FIXTRE TYPE V SEMENTE SPELR N HMMERTON REFLETOR FLT TEMPERE LSS LENS MP//ME Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Horizontal Footcandles Scale: Inch = 6 Ft. Light Loss Factor =. Total Lumens Per Luminaire = 8 Height = 6. Ft Maximum alculated Value =. Fc rrangement: Single rm Length =. Ft Page Scale: Square = 6 ft Initial Light Loss Factor =. Height = 6 ft rrangement = Single EP ata Only L-. Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

29 Project Name: alifornia ria Size HI atalog Number: PROPRIETRY N ONFIENTIL THE INFORMTION ONTINE IN THIS RWIN IS THE SOLE PROPERTY OF VISIONIRE LIHTIN. NY REPROTION IN PRT OR S WHOLE WITHOT THE WRITTEN PERMISSION OF VISIONIRE LIHTIN IS PROHIITE. F imensional rawings E. L- SIZE L- L- L-." 8⅞ 6.. Max. Watts Lbs W 9 NLESS OTHERWISE SPEIFIE: IMENSIONS RE IN INHES TOLERNES: FRTIONL ± NLR: MH ± EN± TWO PLE EIML ±. THREE PLE EIML ±. eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. Offered with the high-efficiency Pulse Start Metal Halide or High Pressure Sodium HI light sources; this is an efficient and tasteful solution for any lighting application. The alifornia ria HI series features the most advanced lighting reflector system available today. The vertical-burn Vision Reflector System is a revolutionary patented reflector that allows for the use of fewer fixtures and poles with wider spacing, providing substantial equipment, installation and energy cost savings. Model L- Optics II (T) Wattage HI 7 III () PS (T) RHITETRL IV (T) V (T) (7) () () () Source PS *Reduced Envelope W () (P) () 8 () (S) 6 PPLITION This post top luminaire is a flat lens, IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. The alifornia ria is a perfect compliment to any roadway, shopping center, park, walkway or boardwalk environment. Post Top *Slips over Ø tenon ½ tall with special threaded mounting plate. Requires special tenon adaptor if poles are not Visionaire Lighting poles. Finish ronze (Z) lack Finials No. No. No. No. (FIN) (FIN) (FIN) (FIN) White utton Photocell 77 Forest reen (P) (P8) (P) (P77) 8 Silver Metallic Single in-line fuse () () M-Tap *Multi-Tap ballast wired at 77 V unless specified (6) 7 (8) (PT) (WH) (F) Fusing (SL) (SF) (SF77) Weathered rown (F8) (F) (F8) (W) Soft old ouble in-line fuse Internal Light Shield (ILS) (S) ustom olor () PS - Pulse Start Metal Halide HPS - High Pressure Sodium For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 98 MTERIL SE ON NEXT SSY 7 8 (K) () () Voltage alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. INTERPRET EOMETRI TOLERNIN PER: NME RWN PEREZ HEKE EN PPR. MF PPR. Q.. OMMENTS: FINISH O NOT SLE RWIN

30 alifornia ria Housing ie cast aluminum fixture housing is diameter with integral toolless push latch sealing mechanism. housing encloses the lamp and Vision reflector components exclusively. oor Frame & Lens ie cast aluminum door frame incorporates a one-piece, silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for direct access to the lamp; and is supported with a hinge and latch mechanism. Lens is clear, tempered flat glass, fully gasketed with a one-piece, extruded silicone gasket for complete weather and insect protection. Vision Optical System Patented Vision series high performance, multifaceted, segmented, 9% reflectance, anodized aluminum reflectors. Vertical lamp reflectors available in four () distribution patterns (II, III, IV and V). Quali-uard Finish components are chemically pretreated through a multiplestage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for two () years. Size HI allast ssembly Modular ballast assembly is mounted to the cast aluminum fitter; and is removable without the use of tools. Quick disconnect(s) supplied for incoming power and to the lamp, for ease of installation and maintenance. HI ballasts are HPF regulating autotransformers rated at - ºF. vailable in Pulse Start Metal Halide and High Pressure Sodium. Finials utton type photocell Fusing Internal light shield Please consult factory for custom options. Listings alifornia ria is ETL listed, suitable for wet locations. E IS compliant.. Powder oated ToughTM VisionTM Reflector System (.S. Patent No. 7,,98). Post Top Tenon Fitter Post Top Mount: The cast aluminum post top mount fitter houses the ballast assembly. The contractor-friendly mounting hardware is concealed inside the post top fitter; which slips over O.. x tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Housing Shades / Finial s L- / FIN L- / FIN L- / FIN L- / NO FINIL RHITETRL L- / NO FINIL Isolux urves LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS.. Scale: Square = ft Initial Light Loss Factor =. Height = ft rrangement = Single LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS..... VISIONIRE LIHTIN LIFORNI RI RI-T-PS "I. X "H. OTOOR LIHTIN FIXTRE TYPE V SEMENTE SPELR N HMMERTON REFLETOR FLT TEMPERE LSS LENS MP//ME Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Horizontal Footcandles Scale: Inch = 6 Ft. Light Loss Factor =. Total Lumens Per Luminaire = 8 Height = 6. Ft Maximum alculated Value =. Fc rrangement: Single rm Length =. Ft Page Scale: Square = 6 ft Initial Light Loss Factor =. Height = 6 ft rrangement = Single EP ata Only L-. Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

31 Project Name: alifornia ria Size HI atalog Number: imensional rawings L- L- eauty meets performance in this feature-rich and highly versatile alifornia ria luminaire series. Offered with the high-efficiency Pulse Start Metal Halide or High Pressure Sodium HI light sources; this is an efficient and tasteful solution for any lighting application. The alifornia ria HI series features the most advanced lighting reflector system available today. The vertical-burn Vision Reflector System is a revolutionary patented reflector that allows for the use of fewer fixtures and poles with wider spacing, providing substantial equipment, installation and energy cost savings. Model L- Optics II (T) Wattage HI 7 III () PS (T) RHITETRL IV (T) V (T) (7) () () () Source PS *Reduced Envelope W () (P) () 8 () (S) Max. Watts Lbs L- 9¾ 6 W 8 alifornia ria is a strong, die cast aluminum fixture, manufactured in five architecturally pleasing housing styles, with mix and match finials and a variety of finishes to choose from. This post top luminaire is a flat lens, IES full cutoff fixture to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting that is especially desirable in any pedestrian locale. The alifornia ria is a perfect compliment to any roadway, shopping center, park, walkway or boardwalk environment. Post Top *Slips over Ø tenon ½ tall with special threaded mounting plate. Requires special tenon adaptor if poles are not Visionaire Lighting poles. Finish ronze (Z) lack Finials No. No. No. No. (K) (FIN) (FIN) (FIN) (FIN) White utton Photocell 77 Forest reen (P) (P8) (P) (P77) 8 Silver Metallic Single in-line fuse () () () () Voltage M-Tap *Multi-Tap ballast wired at 77 V unless specified (6) 7 (8) (PT) (WH) (F) Fusing (SL) (SF) (SF77) Weathered rown (F8) (F) (F8) (W) Soft old ouble in-line fuse Internal Light Shield (ILS) (S) ustom olor () PS - Pulse Start Metal Halide HPS - High Pressure Sodium For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.

32 alifornia ria Housing ie cast aluminum fixture housing is diameter with integral toolless push latch sealing mechanism. housing encloses the lamp and Vision reflector components exclusively. oor Frame & Lens ie cast aluminum door frame incorporates a one-piece, silicone channel gasket to seal the housing completely. The tool less push latch allows the housing to hinge upwards for direct access to the lamp; and is supported with a hinge and latch mechanism. Lens is clear, tempered flat glass, fully gasketed with a one-piece, extruded silicone gasket for complete weather and insect protection. Vision Optical System Patented Vision series high performance, multifaceted, segmented, 9% reflectance, anodized aluminum reflectors. Vertical lamp reflectors available in four () distribution patterns (II, III, IV and V). Quali-uard Finish components are chemically pretreated through a multiplestage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for two () years. Size HI allast ssembly Modular ballast assembly is mounted to the cast aluminum fitter; and is removable without the use of tools. Quick disconnect(s) supplied for incoming power and to the lamp, for ease of installation and maintenance. HI ballasts are HPF regulating autotransformers rated at - ºF. vailable in Pulse Start Metal Halide and High Pressure Sodium. Finials utton type photocell Fusing Internal light shield Please consult factory for custom options. Listings alifornia ria is ETL listed, suitable for wet locations. E IS compliant.. Powder oated ToughTM VisionTM Reflector System (.S. Patent No. 7,,98). Post Top Tenon Fitter Post Top Mount: The cast aluminum post top mount fitter houses the ballast assembly. The contractor-friendly mounting hardware is concealed inside the post top fitter; which slips over O.. x tall tenon with a special threaded mounting plate and is secured by a high-strength bolt. No exposed hardware. Housing Shades / Finial s L- / FIN L- / FIN L- / FIN L- / NO FINIL RHITETRL L- / NO FINIL Isolux urves LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS.. Scale: Square = ft Initial Light Loss Factor =. Height = ft rrangement = Single LIFORNI RI- TYPE V PLSE STRT OPTIS WTTS..... VISIONIRE LIHTIN LIFORNI RI RI-T-PS "I. X "H. OTOOR LIHTIN FIXTRE TYPE V SEMENTE SPELR N HMMERTON REFLETOR FLT TEMPERE LSS LENS MP//ME Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Horizontal Footcandles Scale: Inch = 6 Ft. Light Loss Factor =. Total Lumens Per Luminaire = 8 Height = 6. Ft Maximum alculated Value =. Fc rrangement: Single rm Length =. Ft Page Scale: Square = 6 ft Initial Light Loss Factor =. Height = 6 ft rrangement = Single EP ata Only L-.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

33 Oden Project Name: LE atalog Number: imensional rawings With six interchangeable caps and spun shade styles, the P () P () P () Oden - LE offers architects, designers and engineers endless possibilities for a custom fixture to fit their unique application. The Oden - LEs highquality, durable construction makes it an ideal fixture for any application. Model Optics ON--L I (T) II (T) Source # of LEs 6 (6L) (L) 8 RHITETRL (8L) ON--L III (T) 8 (8L) 6 (6L) IV (T) 8 (8L) (L) ON--L P () P () P 6 (6) Milliamps Kelvin K () () 7 (7) *Warm white (K) K *Neutral white (K) K *ool white (K) Max. LEs Lbs ON--L 7½ 8 ON--L ½ ON--L 7 HOSIN (H) HOSIN (H) HOSIN (H) HOSIN (H) HOSIN (H) HOSIN 6 (H6) Voltage -77 Yoke Mount *niversal voltage (NV) 8 () 7 (8) *Slips over Ø tenon tall with special threaded mounting plate. (YM) rm Mount *For size fixture (M) rm Mount Large *For size & fixtures (ML) Wall Mount (WM) () lack (K) () White () (WH) Sandstone (SN) Weathered rown (W) () (LS) (IM) (6) H (H) () utoff Louver System 6 Verdigris (V) (P) (P8) (P) (P77) - V imming river (H) (SL) utton Photocell () Silver Metallic ustom olor 8 ap/shade (Z) (F) (L) VW ronze Forest reen V (T) Finish H H (H) H *No controls Watt Stopper FSP- *Works with FSP- (WS-8) 8 Height (WS-) 9- Height (WS-) - Height This option will require() FSIR remote for programing (H) H (H) H6 (H6) (8L) (TW) *See decorative arm section for arm & wall mount options. *Input selection from this column in the form of: -H For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.

34 Oden LE Housing High-quality, one-piece spun aluminum shade and durable cast aluminum top cap; available in three housing sizes. ll external hardware is stainless steel. One-piece, cast-aluminum door assembly with tool less access. Electrical ssembly The Oden - LE is supplied with a high-performance LE driver, located in its cap, that accepts V thru 77 V, and 8 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. kv surge protector supplied as standard. Thermal Management The Oden - LE provides excellent overall thermal management by maximizing the efficiency of the heat sink in the fixture. This enables the Oden - LE to withstand higher ambient temperatures and higher drive currents without degrading LE life. Warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. utton type photocell utoff louver system - V dimming driver Watt Stopper FSP- Optical System The highest lumen output LEs are utilized. Estimated life of the LEs is,+ hours. vailable with 6 IES distribution patterns. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. RI values are 7 Listings Oden is cl listed, suitable for wet locations. IP6 Rated L Listed I ertification LM79 LM8 Powder oated ToughTM Quali-uard Finish components are chemically pretreated through a multiple-stage washer and finished with an electrostatically-applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. The Oden - LE mounts to a wide selection of decorative and custom Visionaire mounting arms for both pole and wall mount applications (Mounts to Visionaire arms only. See Visionaire rms section of catalog). IP6 RTE esignlights onsortium (L) qualified Product. Some configurations of this product family may not be esignlights onsortium (L) listed, please refer to the L qualified products list to confirm listed configurations. K must be selected for I certification. EP ata Only with V-S s with V- with V7-S s with V7- ON ON ON ON ON- 8 m LPW LPW LPW LPW LPW W LPW Watts ON Visit for up-to-the-minute chart information, including types not listed here.*multiply K values by. K /.9 K Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: () RHITETRL K Lumen ata Lumen hart pdated..7 # LEs

35 Oden Project Name: HI atalog Number: imensional rawings With six interchangeable caps and six spun shade styles, the Oden offers architects, designers and engineers endless possibilities for a custom fixture to fit their unique application. Oden s highquality, durable construction makes it an ideal fixture for any environment. Model ON- Optics II (T) RHITETRL ON- (T) (T) ½ W 7 W 7 HOSIN 6 (H6) (7) Source (P) (S) Voltage Yoke Mount () 8 () () PS PS PS () () *Reduced Envelope Lamp on 7 W PS (P) () 77 () HPS 8 () HPS (S) M-Tap *Multi-Tap ballast wired at 77 V unless specified (6) PS 7 (P) (8) (7) ON- HOSIN (H) () ON- HOSIN (H) Wattage 7 7 P () P () P 6 (6) () ON- Lbs W HOSIN (H) *Reduced Envelope Lamp on W V Max. Watts 7½ HOSIN (H) () IV HOSIN (H) (T) ON- P () P () P () () III LPS (L) *Size and only. Slips over Ø tenon tall with special threaded mounting plate. (YM) rm Mount (M) Finish ronze (Z) (P) (P8) (P) (P77) () () White () (K) (WH) Sandstone (ML) (W) Wall Mount Silver Metallic (SL) Fusing Single in-line fuse () (SF) (SF77) () (F8) (F) (F8) (6) Internal Light Shield 6 7 *Illuminated Rings only (7) H ouble in-line fuse (ILS) House Side Light Shield (LS) (H) Illuminated Rings (V) (H) lue Forest reen (H) Verdigris H H H (F) (H) ustom olor (H) () PS - Pulse Start Metal Halide HPS - High Pressure Sodium LPS - Low Pressure Sodium utton Photocell lack (SN) rm Mount Large *For size and Weathered fixtures rown (WM) ap/shade H H6 (H6) *(IR- ) (L) Red (R) reen (N) lear (L) *Input selection from *For ap 7 only, input option in the this column in the form of: IR-xx, where xx indicates form of: -H color (L, R, N or L). For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.

36 Oden HI Housing High-quality, one-piece, spun aluminum shade, and durable, cast aluminum top cap, available in three housing sizes. ll external hardware is stainless steel. Oden mounts to a wide selection of decorative and custom mounting arms for both pole and wall mount applications (see ecorative rms section of catalog). Lens and oor ssembly One-piece, cast-aluminum, door assembly with tool less access. Lens is clear, tempered flat glass, secured by galvanized lens retainers; fully gasketed, with a form-fitting, one-piece premium extruded silicone gasket to provide complete weather and insect protection. Electrical ssembly ll ballasts are premium HPF autotransformers, available in High Pressure Sodium, Low Pressure Sodium and Pulse Start Metal Halide. allast provides consistent lamp starting down to - ºF. Socket is a glazed porcelain medium or mogul base with nickel plated contacts, rated at kv and 6 V. VisionTM Optical System High performance vertical lamp, multifaceted, full cutoff, segmented, 9% reflectance anodized aluminum reflectors. omputer numerical control (N) cut and bent for manufacturing precision and consistency. vailable in four IES distribution patterns. Field rotatable reflector (except V). Tool-less reflector entry. utton type photocell. Fusing. Internal light shield. House side light shield. Illuminated rings (7 cap only). Illuminated Rings Edge-lit colored rings available in lue (L), Red (R), reen (N) and lear (L). Option available on 7 cap only. Listings Powder oated ToughTM. Quali-uard Finish components are chemically pretreated through a multiplestage washer and finished with an electrostatically-applied, thermoset polyester powder coat textured paint with a to mils thickness. Finish is oven-baked at ºF for maximum adherence and finish hardness. vailable in standard and custom colors. Finish is guaranteed for two () years. Isolux urves... VISIONIRE LIHTIN, LL ON- T-MH-VLF-SE OEN SIZE TYPE REFLETOR-FLT LSS LENS LMINIRE SIZE " x " ONE VENTRE WTT MH LMP. Scale: Square = 6 ft Initial Light Loss Factor =. Height = 8 ft rm Length = ft rrangement: ouble (ack-to-back)... OEN- TYPE III PLSE STRT OPTIS WTTS.. VISIONIRE LIHTIN, LL ON- T-PS-VLF-SE OEN SIZE FLT LSS W PLSE STRT MOL SE VERTIL POSITION Horizontal Footcandles Scale: Inch = 6 Ft. Light Loss Factor =. Total Lumens Per Luminaire = 8 Height = 8. Ft Maximum alculated Value =. Fc 8 eg (back-back) rm Length = Ft Typical ecorative rms - (dditional rms in rm Section) Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Page EP:. V-S EP:. ¼ V-WM *Shown with /" thick flat aluminum wall plate 6 ¼ 7 EP:.8 V- Page EP:. EP:.6 Horizontal Footcandles Scale: Inch = Ft. Light Loss Factor =. Total Lumens Per Luminaire = Height =. Ft Maximum alculated Value = 7.76 Fc rrangement: Single rm Length = Ft Photometric Toolbox Professional Edition (c) copyright 99-7 by Lighting nalysts, Inc. alculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. ¾ ½ Scale: Square = ft Initial Light Loss Factor =. Height = ft rm Length = ft rrangement: Single... RHITETRL OEN- TYPE V PLSE STRT OPTIS 7 WTTS 7 6 EP:. V7-S V7- V7-WM EP ata Only with V-S s with V- with V7-S s with V7- ON ON ON Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

37 Pavilion II Project Name: LE atalog Number: imensional rawings The Pavilion II LE series is a versatile and contemporary fixture ideal for architectural applications where scale and style ap w/ luminum Rings () ap w/ luminum Rings & Lens () are essential. Two cap choices combined with three shapes of shades; allow for a number of design options. The decorative rings are ⅜ cast aluminum. urable polyester powder coat finish is available in an array of architectural colors. Max. LEs Lbs P-L ap w/ luminum Rings () ap w/out Rings () urved-out Shades urved-out Shades (H) (H) urved-out ap w/out Rings () ap w/ Illuminated Rings () ap w/ Lens () ap w/ Illuminated Rings () Straight Shades urved-in Shades Straight Shades Straight (H) urved-in Shadesurved-In (H) (H) Shade (H) Shade (H)(H) Shade (H) The Pavilion II series is an elegant choice for parks, retail settings, restaurants, marinas and sports arenas. Model P-L Optics I (T) II (T) RHITETRL III (T) Source Milliamps Kelvin Voltage Finish ap/shade ap m K -77 rm Mount ronze # of LEs *niversal *Warm white (M) (Z) voltage (K) (L) 8 (8L) 6 (6L) 8 (8L) IV (T) V (T) VW (TW) (L) () () (NV) K *Neutral white (K) K *ool white (K) 8 () 7 (8) Yoke Mount lack (K) ar (YM) Yoke Mount ars (YM) Wall Mount *Requires decorative arm (WM) White (WH) Forest reen (F) () (P) (P8) (P) (P77) utoff Louver System () Shade H (H) H rey (H) Silver Metallic (H) (Y) utton Photocell (LS) High-Low System (HL) - V imming river *No controls (IM) H (SL) ustom olor () *Input selection from this column in the form of -H For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 6

38 Housing The driver housing and reflector shade are constructed from two-piece, heavy-gauge, spun aluminum with a rolled edge for added strength. hoose straight, curved-out or curved-in shades. ll external hardware is stainless steel. ecorative rings are ⅜ cast aluminum. oor ssembly cast aluminum tool-less door allows easy access into housing and is fully gasketed with a form-fitting one-piece premium extruded silicone gasket to provide complete weather and insect protection. Optical System The highest lumen output LEs are utilized. Estimated life of the LEs is a minimum of, hours. IES distribution types I, II, III, IV, V and V-W are standard. vailable with up to LEs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution for neighborhood friendly lighting. RI values are 7. Quali-uard Finish luminum fixture components are chemically pretreated through a multiple-stage washer and finished with an electrostatically applied, thermoset polyester powder coat textured paint with a minimum of to mils thickness. Finish is oven-baked at a temperature of ºF to promote maximum adherence and finish hardness. ll finishes are available in standard and custom colors. Shade ap Pavilion II mounts to a wide selection of decorative and custom mounting arms for both pole and wall mount applications (see ecorative rms section of catalog). H H Pavilion II LE Electrical ssembly The Pavilion II is supplied with a high-performance LE driver, located in its cap, that accepts V through 77 V, Hz to 6 Hz input. Power factor is 9%. Rated for - of operation. High-low system offers motion control or factory preset switching options. onsult factory for specific details. kv surge protector supplied as standard.warranty Five () year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com. utton type photocell utoff louver system High-low system - V dimming driver Listings Pavilion II is cl listed, suitable for wet locations. LM79. LM8. Powder oated ToughTM. RoHS compliant. PVILION II - ap/shade ombinations PVILION II - ap/shade ombinations ap and Shade ombinations Shade ap H etail H EP ata Only with V-S s with V- with V-S s with V H H Typical ecorative rms - (dditional rms in rm Section) EP:.6 V-S EP:. V- EP:.9 V-WM 7 EP:.9 V-S EP:. V- RHITETRL EP:.8 V-WM K Lumen ata *Lumen chart updated Visit for up-to-the-minute chart information, including types not listed here. * For K multiply values by.9 - For K multiply values by.9 Rancho Way Rancho ominguez, 9 Tel: () -68 Fax: ()

39 Pavilion II Project Name: HI/F atalog Number: imensional rawings Segmented Optics lass apsule Lens PS *eeper shade P Max. Watts Lbs P W PS 6⅞ 6⅞ W Shown w/yoke mount The Pavilion II series is a versatile and contemporary fixture ideal for architectural applications where scale and style are essential. ap w/ luminum Rings () ap w/ luminum Rings & Lens () Five cap choices, including colored illuminated rings and window panes, six shapes of shades and three optic systems allow for endless design options, including a ark-sky vertical lamp, flat glass lens version (P), or choose the shallow shade with standard textured glass capsule lens (PS). urable polyester powder coat finish is available in an array of architectural colors. wide selection of light sources include ompact Fluorescent, High Pressure Sodium or Pulse Start Metal Halide. ap w/out Rings () ap w/ Lens () ap w/ Illuminated Rings () urved-out Shades (H) Straight Shades (H) urved-in Shades (H) H-S H-S H-S The Pavilion II series is an elegant choice for parks, retail settings, restaurants, marinas and sports arenas. Model P *Segmented optics Optics Flat lass Segmented Reflectors III (T) RHITETRL V (T) PS *lass capsule lens. rm mount only. Wattage HI 7 (7) () PS () *P only () Symmetrical ompact Light Fluorescent *-77 V istribution universal voltage (SYM) Source (P) (S) F (F) () () 8 () () 77 () 8 () M-Tap x (x) Yoke Mount ar (YM) Yoke Mount ars (YM) Wall Mount (WM) (Z) lack (K) White (WH) Forest reen (F) rey (Y) 7 ustom olor -77 PS - Pulse Start Metal Halide HPS - High Pressure Sodium F - ompact Fluorescent (M) Finish ronze Silver Metallic (8) *P only rm Mount *Multi-Tap ballast wired at 77 V unless specified (6) () P - Pavilion eep Shade PS - Pavilion Shallow Shade Voltage *niversal voltage (NV) (SL) () ap/shade ap () () () () *Illuminated rings () Shade *P only H (H) H (H) H (H) utton Photocell (P) (P8) (P) (P77) Fusing Single in-line fuse (SF) (SF77) ouble in-line fuse (F8) (F) (F8) lear lass apsule Lens *PS only () crylic Tear rop Lens *P only (T) Internal Light Shield *P only (ILS) Illuminated Rings Shade *(IR- ) H-S (HS) H-S (HS) H-S (HS) (L) *PS only *Input selection from this column in the form of -H lue Red (R) reen (N) lear (L) *For ap only, input option in the form of: IR-xx, where xx indicates color (L, R, N or L). For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LL. ny use of this information requires the written approval of Visionaire Lighting, LL. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice. 8