AREA LIGHTING. American. LumenStar Pages 2-3 Pages 6-7. OrbiStar Pages American Round Pages AREA. AutoLux

Transcription

1 LIGHTING American LumenStar Pages 2-3 Pages 6-7 American Round Pages OrbiStar Pages AutoLux ParkingStar Pages Pages Caribbean Pages Polera Pages 4-5 Center Court Standard Page Toronto Pages Concourse Pages SmartFloods Pages Hillsboro Pages 8-9 1

2 2 American LIGHTING Dimensional Drawings A B C Listed for wet locations Fixture A B C Stripe AME-1 14" 14" 10" 2 " AME-2 19" 19" 12" 2" AME-3 23" 23" 13" 2" AME-4 23" 23" 15" 2" Max.Watts 175w Flat Glass Only 400w Flat Glass (Convex Optional) 1000w Convex Glass Only 1000w Flat Glass Only The American Series blends contemporary architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhoodfriendly outdoor lighting. The clean, compact housing style features a decorative reveal available in complementary or contrasting colors. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. American is offered in four enclosure sizes and fi ve distribution patterns, including a special forward throw -A refl ector for auto dealership front line lighting. High effi ciency photometric performance allows the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. American is a proven performer for auto dealerships, shopping centers, parking lots and general area lighting. A wide selection of light sources from 100 through 1000 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply. Model No. Optics Wattage Source Voltage Mounting Finish / Stripe AME Model Optics Wattage Source Voltage Mounting Finish/ Stripe AME-1 AME-2 AME-3 AME-4 Type II (T2) Type III (T3) (T4) -A Automotive (T4A) (Not Available AME-1 & 2) Type V (T5) 100 (100) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w MH, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v Bolt-On Arm 6 (BOA6) Supplied as standard for AME-1 & 2, specified. Bolt-On Arm 10 (BOA10) Supplied as standard for AME-3 & 4, specified. Supplied for all AME sizes with D90, T90 & Quad mounting. Spider Mount (SM) *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Color Stripe Blue Metallic (94) Red Opaque (188) Silver Metallic (58) Gold Metallic (41) White Opaque (50) Black Metallic (60) Charcoal Metallic (20) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens *Option Available on AME-2 Only (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice. VISIONAIRE LIGHTING Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

3 American Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed from one piece,.080 gauge, corrosion resistant aluminum, with tooled external reveal. The computerized CNC machinery enables all American housings to be constructed quickly, efficiently, and adheing to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Hinged door assembly is CNC precision, sheared and formed from one piece,.080 gauge, corrosion resistant aluminum with captive stainless steel fasteners. The standard lens is a clear tempered flat glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection. Optical System Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat fi nish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Bolt-On-Arm Detail Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, fusing, and quartz restrike. Please consult factory for custom options. Listings American is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Cast Wall Plate Spider Arm Detail EPA Data Fixture with Bracket AME-1 AME-2 AME-3 AME-4 Spider Mount

4 Polera LIGHTING Dimensional Drawings C A B Listed for wet locations Fixture POL-1 POL-2 A B C Max. Watt 26" 17" 10" 40 0w 30" " 13 " 1000 w The Polera luminaire features a unique contemporary design inspired by the sleek styling of a European sports car. High performance optics produce superior illumination with excellent uniformity in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood friendly outdoor lighting. The low profi le, aerodynamic-shaped housing is complimented with a uniquely styled mounting arm. A durable polyester powder coat fi nish in a selection of architectural colors enhance any application. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. Polera is available in two sizes and fi ve distribution patterns, including a special forward throw -A refl ector for auto dealership front line lighting. High efficiency photometric performance permits the use of fewer fixtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. Polera is an exceptional choice for auto dealerships, shopping centers, parking lots, streetlighting and general area lighting. A wide selection of light sources from 100 through 1000 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply. Model No. Opticst Wattage Source Voltage Mounting Finish POL Model Optics Wattage Source Voltage Mounting Finish POL-1 POL-2 Type II (T2) Type III (T3) (T4) -A Automotive (T4A) (Not Available POL-1) Type V (T5) 100 (100) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) MH, MH, MH, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice. 4 VISIONAIRE LIGHTING Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

5 Polera Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed,.080 gauge, corrosion resistant aluminum. The computerized CNC machinery enables all Polera housings to be constructed quickly, efficiently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Door assembly is CNC precision, sheared and formed from.080 corrosion resistant aluminum. The lens is a tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and fi nish hardness. All fi nishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA) with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, convex lens, and fusing. Please consult factory for custom options. Listings Polera is UL listed, suitable for damp and wet locations. All fi xtures factory tested prior to shipment. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate EPA Data Fixture with Bracket POL-1 POL

6 LumenStar LIGHTING Dimensional Drawings A B C Listed for wet locations The LumenStar blends architectural appeal with high performance vertical lamp optical technologies. Providing broad, uniform levels of light, LumenStar s high effi ciency minimizes the number of fixtures and poles needed to illuminate an area. Available in three enclosure sizes with fi ve distribution patterns, including a special forward throw -A reflector for auto dealership front line lighting. A wide selection of light sources from 150 through 1000 watts Fixture A B C Max. Watts LSR " 219 3" w 10" 400w 400w Flat Glass (Convex Optional) LSR " 223 3" 13 13" 1000w 1000w Convex Glass Only LSR " 223 3" 15 15" 1000w 1000w Flat Glass Only are offered, including Pulse Start lamps for exceptional effi ciency, lumen maintenance and color stability. Design applications include shopping centers, parking lots, auto malls, and virtually any general outdoor area lighting. LumenStar is a versatile performer with a fl exible selection of mounting options and durable QualiGuard architectural fi nishes. Computerized state of the art machinery and quality materials insure manufacturing to the highest industry standards. Model No. Optics Wattage Source Voltage Mounting Finish LSR Model Optics Wattage Source Voltage Mounting Finish LSR-2 LSR-3 LSR-4 Type II (T2) Type III (T3) (T4) -A *Automotive (T4A) (Not Available LSR-2) Type V (T5) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w MH, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v Bolt-On Arm 6 (BOA6) Supplied as standard for LSR-2, specified. Bolt-On Arm 10 (BOA10) Supplied as standard for LSR-3 & 4, specified. Supplied for all LSR sizes with D90, T90 & Quad mounting. Spider Mount (SM) *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens *Option Available on LSR-2 Only (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice. 6 VISIONAIRE LIGHTING Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

7 LumenStar Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed,.080 gauge, corrosion resistant aluminum. The computerized CNC machinery enables all LumenStar housings to be constructed quickly, efficiently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Door assembly is CNC precision sheared and formed from.063 corrosion resistant aluminum. The standard lens is a fl at tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, horizontal or vertical lamp optics, light shield, convex lens and fusing. Please consult factory for custom options. Listings LumenStar is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Spider Arm Detail EPA Data Fixture with Bracket LSR-2 LSR-3 LSR-4 Spider Mount

8 Hillsboro LIGHTING Dimensional Drawings Listed for wet locations * Flat lens models are certifi ed IDA Dark Sky Friendly The Hillsboro offers high performance vertical lamp optical technologies with upscale architectural styling. The crisp lines of the housing are highlighted with a distinctive deepset reveal. Advanced optics provide wide, uniform levels of illumination, while minimizing the number of fixtures and poles required to illuminate an area. Available in three enclosure sizes with five distribution patterns, including a special forward throw -A reflector for auto dealership front line lighting. A wide selection of light sources from 150 through 1000 watts Fixture A B C HLS-2 HLS-3 HLS-4 Max.Watts 400w 219 3" 19 23" 12 0" w Flat 400w Glass 23 23" 23 23" 13 3" w1000w 23 3" 23 23" 15 5" w 1000w (Convex Optional) Convex Glass Only Flat Glass Only are offered, including Pulse Start lamps for exceptional effi ciency, lumen maintenance and color stability. Hillsboro is an excellent choice for shopping centers, parking lots, auto malls, and general outdoor area lighting. Versatile mounting options are available, and a selection of durable Quali-Guard architectural fi nishes enhance the application design. Computerized state of the art machinery and quality materials insure manufacturing to the highest industry standards. Model No. Optics Wattage Source Voltage Mounting Finish HLS Model Optics Wattage Source Voltage Mounting Finish HLS-2 HLS-3 HLS-4 Type II (T2) Type III (T3) (T4) -A *Automotive (T4A) (Not Available HLS-2) Type V (T5) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w MH, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v Bolt-On Arm 6 (BOA6) Supplied as standard for HLS-2, specified. Bolt-On Arm 10 (BOA10) Supplied as standard for HLS-3 & 4, specified. Supplied for all HLS sizes with D90, T90 & Quad mounting. Spider Mount (SM) *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens *Option Available on HLS-2 Only (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options 8 For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice. VISIONAIRE LIGHTING Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

9 Hillsboro Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed,.080 gauge, corrosion resistant aluminum. The computerized (CNC) machinery enables all Hillsboro housings to be constructed quickly, efficiently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Door assembly is (CNC) precision sheared and formed from.080 corrosion resistant aluminum. The standard lens is a flat, tempered, clear safety glass, secured by galvanized steel lens retainers and sealed with form fi tting silicone gasketing. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, horizontal or vertical lamp optics, light shield, convex lens and fusing. Please consult factory for custom options. Listings Hillsboro is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Spider Arm Detail HLS-3 & HLS-4 HLS-1 & HLS-2 EPA Data Fixture with Bracket HLS-2 HLS-3 HLS-4 Spider Mount

10 AutoLux LIGHTING Dimensional Drawings Listed for wet locations Fixture A B C ALX ALX Max. Watt 400w 1000w The AutoLux is a low profi le architectural luminaire providing high performance and excellent value for a wide range of outdoor lighting applications. AutoLux features a horizontal lamp, fl at lens design and high effi ciency optics with IES Full Cut-Off classifi cation and Dark Sky friendly certifi cation to eliminate light trespass and light pollution. Design applications include shopping centers, parking lots, auto dealerships, tennis and other outdoor sports lighting installations. Six high effi ciency refl ector systems are available, including a special Tennis/Sport refl ector for optimum forward throw distribution and superior visibility on playing surfaces. AutoLux is available in two housing sizes for 150 through 1000 watt HID lamps, including Pulse Start for exceptional effi ciency, lumen maintenance and color stability. AutoLux offers a versatile selection of mounting options and durable QualiGuard architectural fi nishes to match the application. Computerized state of the art machinery and quality materials insure manufacturing to the highest quality standards. Model No. Opticst Wattage Source Voltage Mounting Finish ALX 10 Model Optics Wattage Source Voltage Mounting Finish ALX-1 ALX-2 Type II (T2) Type III (T3) (T4) Sport (T4S) Autpmotive (T4A) Type V (T5) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) H MH MH, H MH, H 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) Knuckle Mount (KM) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

11 AutoLux Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed,.080 gauge, corrosion resistant aluminum. The computerized CNC machinery enables all AutoLux housings to be constructed quickly, efficiently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Door assembly is CNC precision sheared and formed from.080 corrosion resistant aluminum. The lens is a tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in six distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit. to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA) with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, and fusing. Please consult factory for custom options. Listings AutoLux is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Adjustable Knuckle HLS-1 & HLS-2 EPA Data Fixture with Bracket ALX-1 ALX

12 ParkingStar LIGHTING Dimensional Drawings Listed for wet locations The ParkingStar luminaire combines sleek architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhoodfriendly outdoor lighting. The compact, low profi le die-cast housing features soft rounded contours for a contemporary upscale appearance. Durable polyester powder coat fi nish is available in a wide array of architectural colors to enhance the design application. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. Fixture T-1 A 17 B C Max. Watt w *Flat Glass (Convex Optional) ParkingStar is offered in fi ve IES distribution patterns. High effi ciency photometric performance and exceptional uniformity allow the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. The ParkingStar is a versatile and economical luminaire for shopping centers, parking lots, street lighting, auto dealerships and general area lighting. A wide selection of light sources from 70 through 400 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply. Model No. Opticst Wattage Source Voltage Mounting Finish T 12 Model Optics Wattage Source Voltage Mounting Finish T-1 Type I* (T1) Type II* (T2) Type III* (T3) (T4) Type V (T5) *Hydroformed Reflector and V Segmented. 70 (70) 100 (100) 150 (150) 200 (250) 250 (250) 320 (320) MH H MH, H, MH, H 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) Knuckle Mount (KM) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole specify RPP option. *See Mounting Section for Wallmount options Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens *Vertical Lamp (VLCG) RPP-1 Round Pole Bolt-On Arm (RPP) Type III Segmented Reflector (SR3) For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

13 ParkingStar Specifications Housing Rugged, one piece die-cast, soft corner aluminum housing with 0.12 inch nominal wall thickness All external hardware is rust resistant stainless steel. Lens and Door Assembly Die-cast external door frame is fully gasketed. A one piece extruded silicone gasket seals the door frame against the housing. The lens is a fl at, tempered, clear safety glass. Optical System Refl ector is precision hydroformed or CNC cut and bent, multifaceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, convex glass lens and fusing. Please consult factory for custom options. Listings ParkingStar is UL listed, suitable for damp and wet locations. Dark Sky Friendly certified by the International Dark Sky Association. (Flat Lens models with or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Adjustable Knuckle Adjustable Knuckle EPA Data EPA Data Fixture with Bracket T

14 Toronto LIGHTING Dimensional Drawings A B C Listed for wet locations The Toronto features sleek architectural styling with high performance horizontal lamp/fl at glass lens optical systems. The durable, low profile housing has soft rounded corners for a contemporary upscale appearance. Available in two enclosure sizes with six distribution patterns, including a special forward throw -A refl ector for auto dealership front line lighting. A wide selection of light sources from 70 through 1000 watts are offered, including Pulse Start lamps for exceptional effi ciency, lumen maintenance and color stability. Fixture A B C Max. Watt TRO w TRO / w Toronto is an ideal choice for shopping centers, parking lots, street lighting, auto malls, and general outdoor area lighting. Pole and wall mounting options are available, and a selection of durable QualiGuard architectural fi nishes complement the application design. Computerized state of the art machinery and quality materials insure manufacturing to the highest industry standards. Model No. Opticst Wattage Source Voltage Mounting Finish TRO 14 Model Optics Wattage Source Voltage Mounting Finish TRO-1 TRO-2 Type II (T2) Type III (T3) (T4) Sport (T4S) Autpmotive (T4A) Type V (T5) 70 (70) 100 (100) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) * 1000 watt MH vertical lamp available only in convex. MH, * MH, *, H, MH, *, H *Veritical lamp, Convex Lens Only 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens (VLCG) Size 2 only RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

15 Toronto Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed,.080 gauge, corrosion resistant aluminum. The computerized CNC machinery enables all Toronto housings to be constructed quickly, effi ciently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Door assembly is extruded aluminum. The standard lens is a fl at tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in six distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA) with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, convex lens, horizontal or vertical lamp optics, and fusing. Please consult factory for custom options. Listings Toronto is UL listed, suitable for damp and wet locations. Bolt-On-Arm Detail Cast Wall Plate RPP Cast Aluminum Radiused Pole Plate Adaptor for Round Poles EPA Data Fixture with Bracket TRO TRO

16 American Round LIGHTING Dimensional Drawings AMR-N AMR-D Listed for wet locations Fixture A B Stripe AMR-N1 AMR-N2 AMR-D1 AMR-D2 22" 13- ¼ " 2" 26" 15- ¼ " 2" 22" 13- ¼ " 2" 26" 15- ¼ " 2" Max.Watt s 400w *Flat Glass (Convex Optional) 1000w *Flat Glass (Convex Optional) 400w *Flat Glass (Convex Optional) 1000w *Flat Glass (Convex Optional) The American Round Series combines contemporary architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhoodfriendly outdoor lighting. The cylindrical housing features soft rounded contours in dome or fl at top styles. A decorative circular reveal accents the shape with complementary or contrasting colors. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. American Round is offered in two enclosure sizes and fi ve distribution patterns, including a special forward throw -A reflector for auto dealership front line lighting. High effi ciency photometric performance and exceptional uniformity allow the use of fewer fixtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. The American Round is a proven performer for parking lots, auto dealerships, shopping centers, and general area lighting. A wide selection of light sources from 100 through 1000 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply. 16 Model No. Opticst Wattage Source Voltage Mounting Finish / Stripe AMR Model Optics Wattage Source Voltage Mounting Finish/Stripe AMR-N1 AMR-D1 AMR-N2 AMR-D2 Type II (T2) Type III (T3) (T4) -A *Automotive (T4A) (Not Available AMR-N1 & D1) Type V (T5) 100 (100) 150 (150) 175 (175) 200 (200) 250 (250) 320 (320) 400 (400) 400 (400) 750 (750) 1000 (1000) *Reduced Envelope Lamp on 1000w MH, ( M), (P), (S) ( M), (P), (S) 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) Spider Mount (SM) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. B ronze ( BZ) B lack ( BK) W hite ( WH) G reen ( GN) Grey (GY) Silver Metallic (SL) Custom (CC) Color Stripe B lue Metallic (94 ) R ed Opaque (188 ) S ilver Metallic (58 ) G old Metallic (41 ) W hite Opaque (50 ) B lack Metallic (60 ) Charcoal M etalli c(20 ) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

17 American Round Specifications Housing All housings are one piece, spun aluminum, designed and engineered for a weathertight seal. American Round housings display a decorative external reveal to give the luminaires a distinct appearance. All external hardware is stainless steel. Lens and Door Assembly Door assembly is precision spun one piece.080 gauge corrosion resistant aluminum with captive stainless steel fasteners. The standard lens is a clear tempered fl at glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, and fusing. Please consult factory for custom options. Listings American Round is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Spider Arm Detail EPA Data Fixture with Bracket AMR-N1 AMR-N2 AMR-D1 AMR-D2 Spider Mount

18 Concourse LIGHTING Dimensional Drawings Listed for wet locations * Flat lens models are certifi ed IDA Dark Sky Friendly The Concourse Series blends contemporary architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhoodfriendly outdoor lighting. The cylindrical housing features a smoothly contoured dome top and three decorative circular reveals to accent the shape. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. The Concourse is offered in two enclosure sizes and fi ve distribution patterns, including a special forward throw -A refl ector Fixture A B Max. Watt CON w CON /8 1000w for auto dealership front line lighting. High effi ciency photometric performance permits the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. Concourse is an excellent choice for shopping centers, auto dealerships, parking lots, and general area lighting. A wide selection of light sources from 150 through 1000watts are offered, including Pulse Start lamps for better effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply. Model No. Opticst Wattage Source Voltage Mounting Finish CON 18 Model Optics Wattage Source Voltage Mounting Finish CON-1 CON-2 Type II (T2) Type III (T3) (T4) -A * Automotive (T4A) (Available CON-2 with VLCG only) Type V (T5) 100 (100) 150 (150) 250 (250) 320 (320) 750 (750) 1000 (1000) MH,, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) Spider Mount (SM) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens *Option Available on CON-2 Only (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

19 Concourse Specifications Housing All housings are one piece, spun aluminum, designed and engineered for a weathertight seal. Concourse housings display decorative external reveals to give the luminaires a distinct appearance. All external hardware is stainless steel. Lens and Door Assembly Door assembly is precision spun one piece.080 gauge corrosion resistant aluminum with captive stainless steel fasteners. The standard lens is a clear tempered fl at glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection. Optical System Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat fi nish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard.a Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, and fusing. Please consult factory for custom options. Listings Concourse is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Spider Arm Detail EPA Data Fixture with Bracket CON-1 CON Spider Mount

20 Caribbean LIGHTING Dimensional Drawings Listed for wet locations Fixture CAR-HT1 CAR-HT2 Caribbean Hard-Top A B Max. Watt w w The Caribbean Series combines bold architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting. The cylindrical housing features a distinctive dome shape with a complementary circular decorative reveal. Durable polyester powder coat fi nish is available in a wide array of architectural colors to enhance the design application. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. Caribbean is offered in two enclosure sizes and four IES distribution patterns. High effi ciency photometric performance and exceptional uniformity allow the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. The Caribbean is a superb choice for shopping centers, parking lots, auto dealerships and general area lighting. A wide selection of light sources from 100 through 400 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply. Model No. Opticst Wattage Source Voltage Mounting Finish CAR Model Optics Wattage Source Voltage Mounting Finish Hard-Top CAR-HT1 CAR-HT2 Type II (T2) Type III (T3) (T4) Type V (T5) 100 (100) 150 (150) 250 (250) 320 (320) MH, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400w MH only, factory wired at 480v Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) Spider Mount (SM) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) Convex Glass Lens *Option Available on CAR- HT2 Only (VLCG) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice. VISIONAIRE LIGHTING Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

21 Caribbean Specifications Housing All housings are one piece, spun aluminum, designed and engineered for a weathertight seal. Caribbean housings display a decorative external reveal to give the luminaires a distinct appearance. All external hardware is stainless steel. Lens and Door Assembly Door assembly is precision spun one piece.080 gauge corrosion resistant aluminum with captive stainless steel fasteners. The standard lens is a clear tempered fl at glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection. Optical System Reflector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in four distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The fi nish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K and 600V. Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, and fusing. Please consult factory for custom options. Listings Caribbean is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Spider Arm Detail EPA Data Fixture with Bracket CAR-1 CAR Spider Mount

22 OrbiStar LIGHTING Dimensional Drawings Listed for wet locations The OrbiStar Series blends distinctive architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting. The unique rounded, orbital style housing features a deep set circular decorative reveal in an optional contrasting color. Durable polyester powder coat fi nish is available in a wide array of architectural colors to enhance the design application. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards Fixture A B Max. Watt OSR w OrbiStar is offered in four IES distribution patterns. High effi ciency photometric performance and exceptional uniformity allow the use of fewer fixtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings. The OrbiStar is an excellent choice for shopping centers, parking lots, auto dealerships and general area lighting. A wide selection of light sources from 70 through 400 watts are offered, including Pulse Start lamps for better effi ciency, lumen maintenance and color. Model No. Opticst Wattage Source Voltage Mounting Finish/Stripe OSR 22 Model Optics Wattage Source Voltage Mounting Finish/Stripe OSR-1 Type II (T2) Type III (T3) (T4) Type V (T5) 70 (70) 100 (100) 150 (150) 250 (250) 320 (320) MH, 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On Arm 6 (BOA6) Bolt-On Arm 10 (BOA10) Spider Mount (SM) *Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied for all other mounting configurations. *Round Pole Plate Adaptors (RPP) are to be ordered separately. Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Color Stripe Blue Metallic (94) Red Opaque (188) Silver Metallic (58) Gold Metallic (41) White Opaque (50) Black Metallic (60) Charcoal Metallic (20) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

23 OrbiStar Specifications Housing All housings are two piece, spun aluminum, designed and engineered for a weathertight seal. OrbiStar housings display a decorative external reveal to give the luminaires a distinct appearance. All external hardware is stainless steel. Lens and Door Assembly Door assembly is precision spun one piece.080 gauge corrosion resistant aluminum with captive stainless steel fasteners. The standard lens is a clear tempered flat glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection. Optical System Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in four distribution patterns. Tool-less refl ector entry. Field rotatable refl ector (except Type V). Quali-Guard Finish The finish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3-5 Round Poles. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K and 600V. Fixtures available with a variety of options, including photo cell, photo receptacle, light shield, and fusing. Please consult factory for custom options. Listings OrbiStar is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors) Bolt-On-Arm Detail Cast Wall Plate Spider Arm Detail EPA Fixture with Bracket CAR Spider Mount 23

24 Center Court Standard LIGHTING Dimensional Drawings Listed for wet locations Fixture A B C CCS /4 21-1/4 9 3/4 CCS /2 9 Max. Watt 1000w 1000w The Center Court Standard features a unique high performance refl ector system designed for precisely controlled on-court tennis and outdoor sports lighting. Provides superior visibility on the playing surface and strict control of glare for both players and spectators. The IES optical system provides optimal asymmetric forward throw distribution and neighborhood-friendly, Dark Sky certifi ed lighting to eliminate light trespass. The multi-faceted 95% refl ective aluminum refl ector is computer numerical control (CNC) cut and bent for precise and consistent performance. Low profi le housing and door assembly are effi ciently CNC manufactured from.080 gauge corrosion resistant aluminum for consistent high quality construction. The clear, tempered flat glass lens is secured by galvanized lens retainers and weatherproof sealed with form-fi tting silicone gasketing. The finish is a Quali-Guard textured, electrostatically applied thermoset polyester powder coat paint, available in a wide range of architectural colors. The standard Center Court luminaire mounting arm is a slip-fi t design for easy installation over tenons or poles, and is available in single or multiple fi xture confi gurations. Optional architectural and tennis theme style arms, bolt-on arm, davit arm and knuckle mount are also offered. Model No. Opticst Wattage Source Voltage Mounting Finish CCS 24 Model Optics Wattage Source Voltage Mounting Finish CCS-1 CCS-2 Champion Series (T4) 1000 (1000) 1000 (1000) MH, (M), (P) MH, (M), (P) 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 1000w MH only, factory wired at 480v VISIONAIRE LIGHTING Bolt-On-Arm (BOA) *Round Pole Plate Adaptors (RPP) are to be ordered separately. Slip-Fit-Arm Mount (SFA) Davit Arm (DA) Knuckle Mount (KM) Tennis Court Mounting Arms in various styles and configurations are available - See Page 122 for details Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle with shooting cap (PER) Quartz Restrike (QR) Back Shield (BS) 4 Sided Shield (4SS) Bird-B-Gone (BBG) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) RPP-1 Round Pole Plate Adaptor (RPP) *See Mounting Section for Wallmount options For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

25 Center Court Specifications Housing All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed,.080 gauge, corrosion resistant aluminum. The computerized CNC machinery enables all Center Court Standard housings to be constructed quickly, effi ciently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel. Lens and Door Assembly Door assembly is CNC precision sheared and formed from.080 corrosion resistant aluminum. The lens is a tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing. Optical System Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly efficient, 95% reflective aluminum. reflector is designed for precisely controlled forward throw distribution for high performance tennis and outdoor sports lighting. Tool-less refl ector entry. Field rotatable refl ector. Quali-Guard Finish The finish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit. to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Mounting Slip-fi t mounting arm is constructed of 1½ x 3 rectangular steel tubing, 4 foot in length, with 3 degree upward tilt. Available to slip over 2-3/8, 3, 3½, 4 and 4½ dia. tenons or poles. Offered for single, double 180º, triple 90º, triple 120º and quad fi xture mounting confi gurations. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide and Pulse Start. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Quick disconnect wiring is standard. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 5K and 600V. Fixtures available with a variety of options, including photo cell, quartz restrike, back shield, and fusing. Please consult factory for custom options. Listings Center Court Standard is UL listed, suitable for damp and wet locations. Dark Sky Friendly certifi ed by the International Dark Sky Association. Slip-Fit Mounting Arms Bolt-On-Arm Detail Adjustable Knuckle 4FT 3º EPA: 1.5 TNS100-S1 12" 4FT 4FT TNS100-D2 EPA: 2.6 Tennis mounting arms slip-fit over tenons or poles, available in single, double 180º, triple 90º, triple 120º and quad. See page 122 for details. EPA Data EPA Data Fixture with Bracket CCS-1 CCS

26 SmartFlood LIGHTING Dimensional Drawings Listed for wet locations SFRB-1 & 2 SFL-1 SFR-1 SFL-K SFM-1 Fixture SFM-1 SFR-1 SFL-1 SFRB-1 SFRB-2 SFL-K A B C Max. Watts w w w w w w The SmartFlood family of luminaires are designed and constructed for superior durability, high performance, economical operation and aesthetic appearance. The rugged housings and choice of adjustable knuckle mast fi tter or trunnion bracket offer versatility for a wide range of lighting applications. Models are available for fl oodlighting, accent, security, building façade, landscape and general area lighting. SmartFlood s proven performance, excellent light control and wide selection of light sources from 70 through 1000 watts make it the smart choice for a variety of lighting tasks. Model No. Opticst Wattage Source Voltage Mounting Finish SFL 26 Model Optics Wattage Source Voltage Mounting Finish SFM-1 SFR-1 SFL-1 SFRB-1 SFRB-2 SFL-K High Performance Flood (HPF) 70 (70) 100 (100) 150 (150) 250 (250) 320 (320) 250 (250) 320 (320) 70 (70) 100 (100) 150 (150) 250 (250) 320 (320) 1000 (1000) MH MH MH, H MH, H MH MH, H MH, H MH MH MH, H MH, H 120 (1) 208 (2) 240 (3) 277 (4) 480 (5) M.Tap (6) Multi-Tap ballast factory wired at 277v 5- Tap (7) Standard for 400 & 1000w MH only, factory wired at 480v VISIONAIRE LIGHTING Knuckle Mount (KM) Trunnion Mount (TM) Bronze (BZ) Black (BK) White (WH) Green (GN) Grey (GY) Silver Metallic (SL) Custom (CC) Photocell & Receptacle (PC120) (PC208) (PC240) (PC277) (PCR480) Photo Receptacle *With Shorting Cap (PER) Quartz Restrike (QR) Fusing *Single In-Line Fuse (SF120) (SF277) *Double In-Line Fuse (DF208) (DF240) (DF480) Light Shield (LS) For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice Rancho Way Rancho Dominguez, CA Tel: (310) Fax: (310)

27 SmartFlood Specifications Housings SFM-1, SFR-1, and SFL-1 utilize a rugged, one piece die-cast, soft corner aluminum housing with 0.12 inch nominal wall thickness. SFRB-1 & 2 and SFL-K, are precision formed from corrosion resistant aluminum, utilizing state of the art computer numerical control (CNC) machinery, designed to ensure accuracy and consistency in all fi xture housings, as well as a weathertight seal. All hardware is rust resistant stainless steel. Lens and Door Assembly Die-cast external hinged door frame is fully gasketed. A one piece extruded silicone gasket seals the door frame against the housing. The Lens is a clear tempered fl at glass, completely enclosed and gasketed for a weathertight seal. Optical System Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Quali-Guard Finish The finish is a Quali-Guard textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and fi nish hardness. All fi nishes are available in standard and custom colors. Mounting & Aiming The SmartFlood luminaires are available with either a die-cast aluminum, adjustable knuckle, designed to slip over 2-3/8 inch. pipe, or an adjustable trunnion U bracket, with stainless steel hardware. Knuckles and trunnion brackets are premounted to fi xtures by Visionaire. Electrical Assembly All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit. Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V. Fixtures available with a variety of options, including photocell, quartz restrike, light shield, and fusing. Please consult factory for custom options. Listing SmartFlood is UL listed, suitable for damp and wet locations. Adjustable Trunnion Adjustable Knuckle For horizontal surface or wall mounting Slips Fits over 2 ⅜ - 3 O.D. Pipe 27

28 28