STRADA_ 6x 2_IP_ Modular Asymmetric Lens

Transcription

1 STRD_ 6x _IP_ Modular symmetric Lens REE: XP-G, XT-E OSRM: OSLN SQURE P LUMILEDS: Rebel R, Rebel ES Efficiency 9% IP 67 S86_STRD_IP_x6_DW

2 PRESS RELESE Precision moulded silicone gasket for IP67 rating individually optimized optical elements Location pins for precise positioning Space reserved for PB connectors and screws Easily cleanable optical surfaces Performance Meets Functionality LEDiL s New symmetric STRD-IP-x6-DW Lens Module One Optics Does it ll LEDiL s newest STRD street lighting optic is designed for peak optical performance, ease of installation and protection from dirt and water. STRD-IP-X6-DW is a precision-engineered -position lens array with a tilted beam to direct light efficiently to the roadway surface. The integral silicone gasket protects up to IP67. The wide, asymmetric beam allows for rapid development of luminaires classified as IESN Type II and III and related European and Russian street lighting classes. The information contained herein is the property of LEDiL Oy, Salorankatu 0, FI-0 SLO, Finland and is subject to change without notice. Please visit for additional information, such as the latest photometric files, D mechancial models, and application notes relating to handling, gluing and taping.

3 FETURES and BENEFITS Very wide asymmetrical beam with 70 candela peak Great light uniformity, even with long pole distances Outstanding cutoff to minimize glare optical elements with individually optimized light distribution, reduced installation cost Easy positioning on PB with locating pins. Mounting direction marked in the module Silicone moulded gasket for sealing of the module arefully tested for IP 67* protection RoHS compliant Space reserved for connectors and PB fastening screws Module s shape and surfaces are designed for easy cleaning No need for external light cover, get up to 0% more lumen output in your application IP-rated semi-custom modules possible with various optics from STRD family High light transmission efficiency and virtually impervious to UV-damage High scratch and abrasion resistance Ideal solution for street lighting arrangements requiring pole height / distance ratio of up to and beyond :6 MRKETS and TYPIL PPLITIONS ollector roadway lighting Wide urban boulevard lighting Residential street lighting TEHNIL SPEIFITIONS Dimensions; 7,0 x 7, x 7,9 mm Mounts with screws Module is precision-molded from optical grade PMM UL9 HB rated material with operating rating -0 to +00 Recommended PB thickness,6 mm. PB dimensions,5 x 5 mm. Silicone gasket seals directly into heatsink surface. ross section of gasket and PB,6mm thick PB LED ORDERING INFORMTION Order code: S86_STRD-IP-X6-DW onsult for ordering codes and latest product specifications, which may vary by LED * When mounted according to LEDiL specifications. onsult product datasheet for more information. Silicon seal with ribs The information contained herein is the property of LEDiL Oy, Salorankatu 0, FI-0 SLO, Finland and is subject to change without notice. Please visit for additional information, such as the latest photometric files, D mechancial models, and application notes relating to handling, gluing and taping.

4 pplication notes Strada- IPX6 Installation guide Street lighting Strada- IPX6 Installation guide General information of Strada IPx6-product assembly. The following instructions should be observed before using product. To ensure reliable assembly, Strada IPx6 fastening materials (heat sink, screw) need to be suitable for lens attachment.. Heat sink machining. Screw requirements. ssembly. Screw fastening. Heat sink machining able holes and screw thread holes must be done before lens assembly. fter cable holes and threaded screw holes are machined, ensure that anodized heat sink surface is even. Screw thread hole accuracy is +-0,mm (yellow arrow in picture) Screw vertical straightness tolerance is +- 0, mm. Top view

5 H G F E D B INDEX PRT NO DESRIPTION MTERIL S86 STRD-IP-X6-DW PMM 8N + Silicone seal Top view 7 ross section detail 86.5.,6mm thick PB LED Silicon seal with ribs Section view Bottom view Pockets for wiring and screws x This drawing is our property. It can't be reproduced or communicated without our written agreement. DRWN BY HEKED BY th DESIGNED BY ol DTE ol DTE DTE.8.0 DTSHEET DRWING TITLE SIZE Ledil Oy Salorankatu 0 FIN 0 SLO Finland S86_STRD-IP-X6-DW PRT NUMBER S86 Part Drawing REV 00 SLE : WEIGHT 65,6 g SHEET / H G B

6 H G F E D B INDEX PRT NO DESRIPTION MTERIL S86 STRD-IP-X6-DW PMM 8N + Silicone seal 8x Screws (M) to mount the lens to heat sink. Street side 0x Seal position pin grippers (check that the seal is attached during assembly) Recommended torque with pan head screw: 0.57Nm (for.6mm thick PB, no thermal pad) Fasten middle screws first, then work toward outside corners, fastening screws on opposing sides until reaching corner screws. x LEDs x Position pins (for round PB holes) x Pockets for PB screws (M) Heatsink screw holes must be accurate to prevent twisting and cracks. Multifunciton pocket (wiring, components or screws) Recommended PB:.6mm thick with no or minimum height thermal pad Pockets for PB soldering Dimensions.5 x 5 mm sk LEDIL for layout suggestion and drawings. ut corner as key element for correct alignment Wiring: PB is fully sealed between the lens with silicone seal and the heatsink. Wiring needs to be done trough the PB and heat sink to maintain high IP rating. Other notes: Top view Seal is tested to work in LEDiLś test assemblies. ustomer is recommended to test the sealing in the end product due many variables, such as heat sink surface and possible chemical traces. House side This drawing is our property. It can't be reproduced or communicated without our written agreement. DRWN BY ol HEKED BY as DESIGNED BY ol Bottom view DTE DTE DTE.8.0 DTSHEET DRWING TITLE SIZE Ledil Oy Salorankatu 0 FIN 0 SLO Finland S86_STRD-IP-X6-DW PRT NUMBER S86 Part Drawing REV 00 SLE : WEIGHT 65,6 g SHEET / H G B

7 pplication notes Strada- IPX6 Installation guide Street lighting. Screw requirements STRD IPx6 lens attachment screws are of type M. (DIN 7985, ISO 705/ISO 58 TX) ountersunk screw is not allowed. dk k d DIN 7985 Thread Size dk d k max L M 6mm mm,5mm -mm. ssembly order: a. heat sink b. MPB with thermal pad or thermal paste i. Make sure that MPB wires come through heat sink hole

8 pplication notes Strada- IPX6 Installation guide Street lighting c. Lens/silicon seal i Use lens position pins to align MPB. d. screw fastening i. Install all screws before tighten. ii. Max torque 0,57Nm iii. Tightening order