* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty.

Size: px

Start display at page:

Download "* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty."

Kristopher Pearson
6 years ago
Views:

1 RN YNM WT lient Project name Order# Type Qty TURS N NTS Physical : Low copper content high pressure die-cast aluminum housing eavy aluminum formed yoke (standard yoke included) Stainless steel hardware Silicone sealing devices lear tempered glass lens ual chamber design for heat management and ease of maintenance lectro-statically applied polyester powder coat finish kg / 24 lbs P: ront = 1.60 sq. ft. / 0.15 sq. m. Side = 0.97 sq. ft./ sq. m. P66 K09 rated Meets 3 NS Vibration standard for bridge applications orrosion-resistant coating for hostile environments* Performance : ynamic Warm variable color temperature: 72 Ls (12x 2200K, 12x 2700K, 12x 3000K per board) ynamic White variable color temperature: 72 Ls (12x 2700K, 12x 4000K, 12x 6500K per board) 6, 10, 20, 40, 60 optics available Minimum 1fc (10,7 468 feet (143m) distance (W full output, 6 optic) Lumen maintenance 120,000 hrs 25 ] Resolution per board or per fixture (configured with Lumen V3 software & MX/RM) Operating temperatures: -25 to 50 [-13 to 122] lectrical : Line voltage luminaire for 100 to 277V Power and data in 1 cable, 3ft/1m cord standard (#16-5), other lengths available 100 watts ontrol options: Lumentalk, dim to warm via 0-10V (WW only), MX/RM enabled dim to warm via single channel (WW only) or MX/RM enabled 3-channel color temperature control " [146mm] MX/RM 3-channel control 6 Optic (VN) WW** W** elivered Output [lm] ntensity [peak cd] 4, ,203 5, ,383 im to Warm via MX/RM Single channel control (MX/RM1) WW im to Warm via 0-10V (M/TW) WW 0 Power [W] T* [K] 2,600 4,000 3, , ,700 3, , ,700 K09 Photometric Summary *Tested at full output. **Photometric performance is measured in compliance with SN LM onsult Lumenpulse website for the latest S and LT files. TOP VW " [339mm] 75 board #2 board # " [335mm] " [476mm] 90 RONT VW S VW Standard Yoke (as shown, included) * Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 165 Standard Yoke Mounting djustable pivot limits 1/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

2 MOUNTN OPTONS RN YNM WT " [146mm] " [339mm] " [354mm] 110 SY Short Yoke mounting Short Yoke mounting adjustable pivot limits 3" [76mm] 1 " 2 [13mm] 5 " 8 [16mm] Standard and Short Yoke mounting holes pattern OPTL OPTONS *actory installed LSL Linear Spread Lens orizontal distribution (not adjustable on site) LSLV Linear Spread Lens Vertical distribution (not adjustable on site) actory installed, available for VN to L optics. See Optical ccessories for field adjustable spread lens. 2/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

3 SSORS Order separately Mounting ccessories RN YNM WT 25" [635mm] PM4-1, PM4.5-1, PM5-1 Round Pole Mounting accessory single fixture " [197mm] " [159mm] PM4 Round Pole Mounting ccessory Shown *onsult factory for square pole section " [68mm] PM4-2, PM4.5-2, PM5-2 Round Pole Mounting accessory twin fixtures When PM4-2, PM4.5-2 or PM5-2 are specified, one bracket assembly is supplied per 2 fixtures unless otherwise specified. PM4 PM4.5 PM5 4"± 1/16" 4.5"± 1/16" 5" ± 1/16" or pole Ø mm± 1.6mm 114.3mm ± 1.6mm 127mm ± 1.6mm *onsult factory for other pole diameters " TN2 Tenon adapter to fit on 2 3/8 O.. tenon 4" [100mm] " [63mm] [149mm] " TN4 Tenon adapter to fit on 4 O.. tenon 4" [100mm] " [105mm] [149mm] 3/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

4 SSORS - continued Order separately. Note: installed optical accessories will affect the maximum pivot limits for each mounting option, consult factory for details. RN YNM WT Optical ccessories: L-SN- -K Snoot accessory. Please specify desired exterior finish from the list below. nterior surface painted black. L-SNW- -K Snoot Wide accessory. Please specify desired exterior finish from the list below. nterior surface painted black. L-VS- -K Visor accessory. Please specify desired exterior finish from the list below. nterior surface painted black. L-W- Wire uard accessory. Please specify desired exterior finish from the list below. L-LSL- Linear Spread Lens djustable accessory. Please specify desired exterior finish from the list below. vailable finishes: K - lack Sandtex RZ - ronze Sandtex S - Silver Sandtex W - Smooth white KTX - Textured black RZTX - Textured bronze, non-metallic RTX - Textured medium gray RNTX - Textured green WTX - Textured white - ustom color and finish (please specify RL color) 1 ccessory combinations: + Linear Spread Lens djustable Snoot Snoot Wide Visor YS YS YS Wire uard YS NO YS ccessory combinations must be ordered together on a single line. x: Snoot + Wire uard combination order code is L-SNW-K-K. 1 North merican RL colors specified with RL number only are provided with a smooth/high-gloss finish. Please consult factory for other RL textures and glosses, or to match alternate color charts. inal color matching results may vary. 4/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

5 SSORS - continued Order separately RN YNM WT ontrol Systems: ontrol oxes: LTO2 LU L L-LT LTN X Lumentouch is a wall mount MX 512 controller keypad. Lumencue is a US / mini S MX 512 controller. Lumen is a diagnostic and addressing MX 512 controller. t must be specifi ed on all MX applications. Refer to L specifi cation sheet for details. Lumentalk is a diagnostic and addressing controller. t must be specifi ed for all Lumentalk (LT) applications. Refer to L-LT specifi cation sheet for details. Lumentone is a simple pre-programmed MX 512 controller with a push button rotary dial and live feedback. MX/RM control box. Up to six power and data outputs to fi xtures or fi xture runs. thernet enabled option. Refer to X specifi cation sheet for details. 5/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

6 RN YNM WT RSOLUTON TLS ixture resolution can be configured on-site within the Lumen V3 software. MX/RM enabled X is required. Resolution per board: each board is addressed independently MX RSSS: board #2 4,5,6 board #1 1,2,3 L W MX/RM ONTROL OPTON Resolution per fixture: each fixture is addressed independently MX RSSS: 1 1,2,3 L WW MX/RM1 ONTROL OPTON L W MX/RM ONTROL OPTON 6/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

7 TYPL WRN RMS Wiring olor ode RN YNM WT merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-10V / ata + Orange rey 0-10V / ata - Lumentalk (LT) Lumentalk (LT) - Wiring detail - Third party MX/RM controller - Lumentranslator (LTL-MX) - ata wiring (by others) - Power line ( V ) - Junction box (by others) - Power wiring (by others) - Lumenbeam rande (L-LT) - Power input (control over powerline via Lumentalk system) or from previous fixture - To fixture - To next fixture - Line - round - Neutral - Wire-nuts (by others) - Junction box (by others) onsult factory for specific applications and maximum fixture count/cable length recommendations. Lumentalk enabled fixtures must be commissioned using Lumentalk software and a L-LT. onsult factory for details. Maximum of 1 transmitter (Lumentranslator or Lumenlink) per system. No third party fixtures allowed on the same circuit. 1 MX controller per Lumentalk network, maximum of 48 MX channels per Lumentalk network (minimum step transition update rate is 1 second, minimum fade time between two colors is 1 minute). onsult factory for applications that require additional capabilities. 100 watts per fixture. im to Warm Via 0-10V (M/TW)* *vailable for WW version only, 2700K to 2200K 0-10V imming (M/TW) - Wiring detail Lutron cosystem nabled dimming (S) - wiring detail K - Power input or from previous fixture - To fixture V V - - To next fixture - Line - round - Neutral - Wire-nuts (by others) J - rom third party dimmer K - Junction box (by others) J - Power input ( V) - ata wiring (by others) - Third party dimmer - Power and data wiring (by others) - Junction box (by others) - Lumenbeam rande (L-M/TW) onsult factory for specific applications and maximum fixture count/cable length recommendations. 0-10V m ratings: passive dimmer (urrent Sink): 3m per fixture, active dimmer (urrent Source): 0.5m per fixture. 100 watts per fixture. 7/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

8 TYPL WRN RMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-10V / ata + Orange rey 0-10V / ata - Maximum number of fixtures per run (based on 15 maximum, 16W cable, fixtures spaced 10ft [3m] on center, first fixture 50ft [15m] from X) onfiguration/voltage 120V 208V 240V 277V 50ft [15m] from X RN YNM WT Star Layout (im to Warm Via MX/RM1* and 3-hannel MX/RM) *vailable for WW version only, 2700K to 2200K MX/RM1 and MX/RM - Wiring detail - rom X or previous fixture - Lumenterminator (use at the end of each run only)* - To fixture - ata - - ata + - Neutral - round - Line - Wire nuts (by others) J - Junction box (by others) J - Third party MX/RM controller - ata input (elden 9841 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-ST - Power input ( V) - Power and data output to fixture (wiring by others) - Junction box (by others) - Lumenbeam rande (L-MX/RM or L-MX/RM1) - Third party MX/RM controller - ata input (elden 9841 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-S - Power input ( V) - Power and data output to fixture (wiring by others) - Junction box (by others) - Lumenbeam rande (L-MX/RM or L-MX/RM1) - Power and data wiring (by others) aisy hain Layout (im to Warm Via MX/RM1* and 3-hannel MX/RM) *vailable for WW version only, 2700K to 2200K MX/RM1 and MX/RM - Wiring detail (first or middle of run) - rom X or previous fixture - To fixture - ata + - ata - - To next/from previous fixture - Line - round - Neutral - Wire nuts (by others) J - Junction box (by others) J MX/RM1 and MX/RM - Wiring detail (end of run) - rom X or previous fixture - Lumenterminator* - To fixture - ata - - ata + - Neutral - round - Line - Wire nuts (by others) J - Junction box (by others) onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 32 MX/RM enabled fixtures per X output. Maximum of 4 MX/RM repeaters/x cascading in line. Maximum of 6 outputs per X-ST, maximum of 1output per X-S. Maximum 3ft [1m] fixture cable length recommended for daisy chain layout. MX/RM1 control option requires 1 MX address. MX/RM control option requires 3 MX addresses. 100 watts per fixture. J * MX terminator is required at the end of each run to maintain data integrity. (2x) MX lumenterminator included per X-S, (6x) MX lumenterminator included per X-ST. See installation instructions for details. 8/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

9 OW TO ORR RN YNM WT L oard 1 / oard ousing: L - Lumenbeam rande 2 Voltage: volts volts volts volts volts volts 3 olors and olor temperatures: WW - ynamic warm white color temperature ranging from 2200K to 3000K. W - ynamic white color temperature ranging from 2700K to 6500K. 4 Optic (Please specify for each board): VN - Very Narrow 6 NS - Narrow Spot 10 N - Narrow lood 20 L - lood 40 6 inish: K - lack Sandtex RZ - ronze Sandtex S - Silver Sandtex W - Smooth white KTX - Textured black RZTX - Textured bronze, non-metallic RTX - Textured medium gray RNTX - Textured green WTX - Textured white - ustom color and finish (please specify RL color) 2 7 ontrol: LT - Lumentalk 3 M/TW - im to Warm via 0-10V, 2700K to 2200K 4, 5 MX/RM1 - im to Warm via single-channel MX/RM, 2700K to 2200K 4, 6 MX/RM - 3-channel color temperature control via MX/RM 7 8 Option: SY - Short Yoke 3V - 3 NS Vibration Rating R - orrosion-resistant coating for hostile environments - (certification covers uropean conomic rea) WL - Wide lood 60 (cannot be combined with other optics) 5 Optical Option: LSL - Linear Spread Lens orizontal distribution 1 LSLV - Linear Spread Lens Vertical distribution 1 9 able Length: 3T - 3ft (standard length unless otherwise specified) 8 10T - 10ft 20T - 20ft 30T - 30ft 50T - 50ft 70T - 70ft 100T - 100ft 1M - 1m (standard length unless otherwise specified) 8 5M - 5m 10M - 10m 15M - 15m 20M - 20m 30M - 30m 1 actory installed, available for 6 (VN) to 40 (L) optics. See Optical ccessories for field adjustable spread lens. 2 North merican RL colors specified with RL number only are provided with a smooth/high-gloss finish. Please consult factory for other RL textures and glosses, or to match alternate color charts. inal color matching results may vary. 3 Lumentalk enabled fixtures must be commissioned using Lumentalk software and a L-LT. onsult factory for details. 4 or more information about Lumenpulse s im to Warm technology consult the application note and the brochure on the Lumenpulse website. 5 vailable for WW version only. 10% minimum dimming value. 6 vailable for WW version only. 1% minimum dimming value. 1 MX address per fixture. 7 ixtures set to by fixture resolution. 3 MX addresses per fixture. 8 Maximum 3ft [1m] fixture cable length recommended for daisy chain MX applications with X-S. 9/9 opyright Lumenpulse 2017 Montreal (Quebec) anada and onditions of Sales.

* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty.

* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty. SMLL WT & STT OLORS lient Project name Order# Type Qty TURS N NTS Physical : Low copper content high pressure die-cast aluminum housing eavy aluminum formed yoke Stainless steel hardware Silicone sealing