Specification Sheet lumenline 2

Transcription

1 IRT/INIRT LITIN SPS lient Project name Order# Type Qty TURS N NITS Physical : luminum extruded housing, 2" wide vailable in ', 2', 3', 4', 5', 6', 7' or 8' sections ontinuous runs available in ' increments urable polyester powder coat finish Wide flood indirect lighting optics Wide flood, true asymmetric wallwash or narrow flood direct lighting optics Wallwash and narrow flood optics provided with white painted louvers lack painted or semi-specular louver finish optional Wide flood direct optic provided with frosted extruded acrylic lens igh reflective matte white powder coated reflector Wall mounted Tool-less system for reflector assembly and control gear access ompatible with motion sensors Unlit joiners and corners available for custom configurations ry location only IK05 rated Performance : vailable in 2700K, 3000K, 3500K, 4000K or R color mixing for direct and indirect lighting RI value: 80+ inning within a 2 step Macdam ellipse (white light only) Lumen maintenance: 00,000 hrs 25 ] Lumen measurements comply with LM standard Resolution per foot or per fixture (configured with LumenI V3 software & MX/RM) Operating temperatures: -25 to 50 [-3 to 22] lectrical : Line voltage luminaire for 00 to 347V 6W/ft Regular Output version, direct or indirect lighting 2W/ft igh Output version, direct or indirect lighting 6W/ft optional R source imming options for white light: Lumentalk, 0-0 volt, LI, Lutron cosystem or MX/RM enabled ontrol options for R: Lumentalk or MX/RM enabled Quick connectors for continuous runs irect wide flood irect narrow flood irect true asymmetric wallwash IK05 Performance summary ased on RO, all color temperatures, White painted louver for N and WW optics. elivered Lumens/ Optic output [lm/ft] Watt [lm/w] wide flood* Photometric performance is measured in compliance with ISN LM *stimated. onsult website for latest IS files. TOP VIW, WI LOO OPTI SOWN 2 2 ", 24 4 ", 36 ", 47 7 " 6 8, ", ", ", 95 4 " [37mm, 66mm, 96mm, 26mm, 58mm, 88mm, 29mm, 249mm] 2 6 " [68mm] " [84mm] Wide flood (00 ) irect Narrow flood (30 x 60 ) True asymmetric wallwash Wide flood (00 ) RONT VIW 4 9 " 6 [5mm] SI VIW OTTOM VIW, WI LOO OPTI SOWN /9

2 POTOMTRI INORMTION - IRT LITIN OPTIS WL - Wide flood (00 ), all color temperatures IRT/INIRT LITIN SPS ottom view, frosted lens andlepower distribution 4ft, O elivered output, 4ft fixture [lm] RO O White light R RI Value: N/ lare evaluation, white light X=4, Y= 8 Reflectances: 70/50/20 RO O UR transversal <22 <25 UR axial <22 <25 N - Narrow flood (30 x 60 ), all color temperatures Not available for R or lit joiners ottom View, narrow flood louver andlepower distribution 4ft, O White louver lack louver Semi-specular louver elivered output, 4ft fixture [lm] RO O White louver lack louver 042* 894 Semi-specular 829* RI Value: lare evaluation, white louver X=4, Y= 8 Reflectances: 70/50/ RO O UR transversal <9 <9 UR axial <9 <9 WW - True asymmetric wallwash, all color temperatures Not available for R or lit joiners ottom view, wallwash louver andlepower distribution, 4ft, O White louver lack louver Semi-specular louver elivered output, 4ft fixture [lm] RO O White louver lack louver * Semi-specular 2003* 3642 RI Value: * stimated. onsult website for latest IS and LT fi les. 2/9

3 POTOMTRI INORMTION - INIRT LITIN OPTIS WL - Wide flood (00 ), all color temperatures* IRT/INIRT LITIN SPS Top view, clear lens andlepower distribution 4ft, O elivered output, 4ft fixture [lm] RO O 68 White light R RI Value: N/ * stimated. onsult website for latest IS and LT fi les. 3/9

4 LOUVR INSTLLTION TIL IRT/INIRT LITIN SPS Narrow lood Symmetrical louver design, no specific orientation required OTTOM VIW True symmetric Wallwash WW True asymmetric wallwash Standard distribution towards front of the fixture. True asymmetric wallwash onsult factory for distribution towards back of the fixture lways position louver blades away from the wall OTTOM VIW Standard feeding side (left hand side when facing the wall) 4/9

5 WLL MOUNTIN TILS IRT/INIRT LITIN SPS " 4 [6mm] 6" [52mm] Power/data feed into fixture 5 8 " [7mm] " [57mm] 5" [27mm] 2 " [38mm] " 4 [6mm] K VIW Wall mounting detail for units N.. orizontal 2" x 4" junction box required 5 5 " 6 [5mm] 7 " 8 [300mm] RIT VIW Power/data feed into fixture 3 6 " [5mm] 2 " [38mm] K VIW Mounting holes pattern for Wall mounting plate K VIW Wall mounting detail for 2 units N.. orizontal 2" x 4" junction box required " 2 [38mm] " 2 [38mm] " 4 [6mm] 7 5 " 6 [202mm] Power/data feed into fixture RONT VIW ixture s wall mounting plates positioning horizontal tolerance K VIW Wall mounting detail for 3 to 8 units N.. orizontal 2" x 4" junction box required Nominal fixture length 3' 4' 5' 6' 7' 8' Mounting bracket spacing imension 9 5/8'' [498mm] 3 7/6'' [799mm] 43 5/6'' [00mm] 55 /8'' [400mm] 67'' [702mm] 78 3/6'' [2002mm] WLL MOUNTIN TIL (ONTINUOUS RUN) K VIW 5 7 " 8 [403m] 8 3 " 6 [209mm] Power/data feed 5/9

6 LIT JOINR TYP N IMNSIONS Refer to the SP ordering page Not available for true asymmetric wallwash and narrow flood optics IRT/INIRT LITIN SPS NR* orizontal 90 o Used to build L shapes (quivalent of a 4 fixture) 7" [432mm] 7" [432mm] " [365mm] TOP VIW *Mounting brackets installed on joiner longer sides. onsult factory for mounting brackets installed on joiner shorter sides. 6/9

7 UNLIT JOINR TYP N IMNSIONS Refer to the SP ordering page IRT/INIRT LITIN SPS NR orner 90 o LNR Linear 80 o *onsult factory for shapes requiring the LNR joiner. TYPIL IMNSIONS N MOUNTIN POINT LOTIONS 5 8 " [7mm] Nominal fixture length ' 2' 3' 4' Overall fixture length imension 4 7/8'' [379mm] 26 5/8'' [677mm] 38 /2'' [977mm] 50 5/6'' [279mm] Overall fixture length with brackets imension 5 /2'' [394mm] 27 /4'' [692mm] 39 /8'' [994mm] 50 5/6'' [294mm] TOP VIW IRST OR N O RUN 5' 62 /6'' [578mm] 6' 73 5/6'' [879mm] 7' 85 3/6'' [28mm] 6 /6'' [592mm] 74 9/6'' [894mm] 86 7/6'' [296mm] 8' 97 5/8'' [248mm] 98 /4'' [2496mm] 5 8 " [7mm] Nominal fixture length ' 2' Overall fixture length with corners imension 7 5/6'' [440mm] 29 /6'' [738mm] Overall length with brackets imension 8 9/6'' [47mm] 30 5/6'' [770mm] 3' 4' 40 7/8'' [038mm] 52 3/4'' [340mm] 42 /8'' [070mm] 54'' [372mm] 5' 64 /2'' [639mm] 65 3/4'' [670mm] 6' 76 3/8'' [940mm] 77 5/8'' [972mm] TOP VIW MIL O RUN 7' 8' 88 /4'' [2242mm] 00 /6'' [2542mm] 89 /2'' [2273mm] 0 5/6'' [2573mm] Nominal fixture length Middle of run fixture length imension ' 2' 5/6'' [303mm] 23 /6'' [602mm] 3' 4' 35 /2'' [902mm] 47 3/8'' [202mm] 5' 59 /8'' [504mm] 6' 7'' [804mm] 7' 82 7/8'' [204mm] 8' 94 /6'' [2405mm] 7/9

8 SSORIS Order separately IRT/INIRT LITIN SPS ontrol Systems: ontrol oxes: LTO2 LU LI LI-LT LTN X L Lumentouch is a wall mount MX 52 controller keypad. Lumencue is a US / mini S MX 52 controller. LumenI is a diagnostic and addressing MX 52 controller. It must be specifi ed for all MX applications. Refer to LI specifi cation sheet for details. LumentalkI is a diagnostic and addressing controller. It must be specifi ed for all Lumentalk (LT) applications. Refer to LI-LT specifi cation sheet for details. Lumentone is a simple pre-programmed MX 52 controller with a push button rotary dial and live feedback. MX/RM control box. Up to six power and data outputs to fi xtures or fi xture runs. thernet enabled option. Refer to X specifi cation sheet for details. Lumentalk ata ridge, 0-0V or MX output. Refer to L specifi cation sheet for details. 8/9

9 RSOLUTION TILS pplicable for MX/RM control option only. ixture resolution can be configured on-site within the LumenI V3 software. MX/RM enabled X is required. IRT/INIRT LITIN SPS Resolution per foot: each foot is addressed independently Total number of MX addresses required per fixture (irect/) Single units ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft W/W W/R Lit joiner NR 6 0 Resolution per fixture: each reflector is addressed independently Total number of MX addresses required per fixture (irect/) Single units ft to 4ft 5ft to 8ft W/W 2 4 W/R 4 8 Lit joiner NR 2 4 OR N RLTOR LYOUT PR IXTUR LNT LIT JOINR IN SPS ft 2ft 3ft 2 Reflector 4 irect 3 2 Reflector irect Reflector irect NR orizontal 90 Reflector 2 irect 4 3 4ft 5ft Reflector Reflector irect Reflector Reflector irect Reflector 3 5 Reflector 4 6 6ft Reflector Reflector Reflector irect 7ft Reflector Reflector Reflector irect 8ft Reflector Reflector Reflector irect 9/9

10 RSOLUTION TILS - continued IRT/INIRT LITIN SPS xample: MX addresses, resolution per foot, 8ft fixture and NR lit joiner 2 34, 35, 36 3, 32, , 29, , 26, , 38, , 4, , 44, , 47, 48 8ft Reflector 3 Reflector 4 Reflector irect White light version R version, 2, 3 2 4, 5, 6 3 7, 8, 9 4 0,, , 23, , 20, 2 6 6, 7, 8 5 3, 4, 5, 2, 3 2 4, 5, 6 4 0,, 2 3 7, 8, 9 5 3, 4, 5 Reflector 4 6 6, 7, 8 NR orizontal 90 Reflector Reflector 3 irect xample: MX addresses, resolution per fixture, 8ft fixture and NR lit joiner 3 7, 8, 9 4 0,, 2 8ft Reflector 3 Reflector 4 Reflector irect, 2, 3 2 4, 5, 6, 2, 3 2 4, 5, 6 Reflector 4 NR orizontal 90 Reflector Reflector 3 irect 0/9

11 TYPIL WIRIN IRMS Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Non-imming (NO) Non-imming (NO) - Wiring detail - Power input (00-347V) - Junction box (by others) - Power wiring (by others) - Lumenline Surface Wall Mount, single unit - Lumenline Surface Wall Mount, continuous run onsult factory for specific applications and maximum fixture count/cable length recommendations. Regular Output version, direct or indirect lighting: 6 watts per foot [0.3m], igh Output version, direct or indirect lighting: 2 watts per foot [0.3m]. - Power input or from previous fixture - Wire-nuts (by others) - Neutral - round - Line - To next fixture - To fixture - Junction box (by others) Lumentalk (LT) % minimum dimming value 2' to 8' [0.6 to 2.4m] fixture lengths and continuous runs Lumentalk (LT) - Wiring detail (for 2' to 8' fixture lengths [0.6 to 2.4m] and continuous runs) - Third party dimmer/controller - Lumentranslator (LTL-00, -MX, -TRI, -LI) - ata wiring (by others) - Power line (20-277V ) - Junction box (by others) - Power wiring (by others) - Lumenline Surface Wall Mount, single unit (2' to 8' fixture lengths) [0.6 to 2.4m] - Lumenline Surface Wall Mount, continuous run - Power input (control over power line via Lumentalk system) or from previous fixture - Wire-nuts (by others) - Neutral - round - Line - To next fixture - To fixture - Junction box (by others) /9

12 TYPIL WIRIN IRMS - continued Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Lumentalk (LT) - continued % minimum dimming value ' [0.3m] fixtures Lumentalk (LT) - Wiring detail (for ' fixtures [0.3 m]) J I - Third party dimmer/controller - Lumentranslator (LTL-00, -MX, -TRI, -LI) - ata wiring (by others) - Power line (20-277V ) - Lumentalk ata ridge (L-IM or L-MX) - Junction box (by others) - Power wiring (by others) - Lumenline Surface Wall Mount, single unit (' [0.3m] fixture length) - rom Lumentalk ata ridge (control over power line via Lumentalk system) or from previous fixture - Neutral - round - Line - Wire-nuts (by others) - 0-0V + / ata V - / ata - - To next fixture I - To fixture J - Junction box (by others) Wiring detail using L-IM or L-MX (for ' fixtures [0.3 m]) - Power input (control over power line via Lumentalk system) - round - Line - Neutral - 0-0V + / ata V - / ata - - To fixture onsult factory for specific applications and maximum fixture count/cable length recommendations. Lumentalk ata ridge required for ' [0.3m] fixture lengths. or white light applications with all fixtures controlled as zone: fixtures and Lumentalk ata ridge must be specified as IM. Maximum of 0 fixtures per L-IM, consult factory for applications that require additional capabilities. or white light and R applications with fixtures controlled individually: fixtures and Lumentalk ata ridge must be specified as MX, 2-step commissioning process: - MX/RM system using LumenI software and a LI, 2 - Lumentalk system using LumentalkI software and a LI-LT. Maximum of 32 fixtures per L-MX. onsult factory for details. or MX applications: MX controller per Lumentalk network, maximum of 48 MX channels per Lumentalk network (minimum step transition update rate is second, minimum fade time between two colors is minute). R MX applications require a MX Lumentranslator (LTL-MX) and a MX controller. onsult factory for details and applications that require additional capabilities. Maximum of transmitter (Lumentranslator or Lumenlink) per system. No third party fixtures allowed on the same circuit. onsult factory for LI Lumentalk applications. Regular Output version, direct or indirect lighting: 6 watts per foot [0.3m], igh Output version, direct or indirect lighting: 2 watts per foot [0.3m]. 2/9

13 TYPIL WIRIN IRMS - continued Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - 0-0V imming (IM) 0% minimum dimming value 0-0V imming (IM) - Wiring detail K J I - Third party dimmer - ata wiring (by others) - Power input (00-347V) - Power and data wiring (by others) - Junction box (by others) - Lumenline Surface Wall Mount, single unit - Lumenline Surface Wall Mount, continuous run - Power input or from previous fixture - Line - round - Wire-nuts (by others) - rom third party dimmer - To next fixture - 0-0V - - Neutral I - 0-0V + J - To fixture K - Junction box (by others) onsult factory for specific applications and maximum fixture count/cable length recommendations. 0-0V m ratings: passive dimmer (urrent Sink): 3m per fixture, active dimmer (urrent Source): 0.5m per fixture. Regular Output version, direct or indirect lighting: 6 watts per foot [0.3m], igh Output version, direct or indirect lighting: 2 watts per foot [0.3m]. 3/9

14 TYPIL WIRIN IRMS - continued Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - LI imming (LI) % dimming value LI imming (LI) - Wiring detail K J I - Third party LI controller - ata wiring (by others) - Power input (00-347V) - Power and data wiring (by others) - Junction box (by others) - Lumenline Surface Wall Mount, single unit - Lumenline Surface Wall Mount, continuous run - Power input or from previous fixture - Line - round - Wire-nuts (by others) - rom LI controller - To next fixture - ata - - Neutral I - ata + J - To fixture K - Junction box (by others) Total number of LI addresses required per fixture x LI address per reflector W/W Single units ft to 4ft 5ft to 8ft 2 4 Lit joiner NR 2 onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 64 LI addresses per LI loop. ach lumenline reflector requires x LI address: a lumenline fixture can contain multiple reflectors, refer to oard and Reflector Layout for details. onsult factory for specific applications. Regular Output version, direct or indirect lighting: 6 watts per foot [0.3m], igh Output version, direct or indirect lighting: 2 watts per foot [0.3m]. 4/9

15 TYPIL WIRIN IRMS - continued Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Lutron cosystem nabled imming (S) % minimum dimming value Lutron cosystem nabled imming (S) - Wiring detail K J I - Lutron cosystem controller - ata wiring (by others) - Power input (00-347V) - Power and data wiring (by others) - Junction box (by others) - Lumenline Surface Wall Mount, single unit (2' to 8' fixture lengths) [0.6 to 2.4m] - Lumenline Surface Wall Mount, continuous run - Power input or from previous fixture - Line - round - Wire-nuts (by others) - rom Lutron cosystem controller - To next fixture - ata - - Neutral I - ata + J - To fixture K - Junction box (by others) Total number of cosystem addresses required per fixture x cosystem address per reflector W/W Single units 2ft to 4ft 5ft to 8ft 2 4 Lit joiner NR 2 onsult factory for specific applications and maximum fixture count/cable length recommendations. ach lumenline reflector requires x cosystem address: a lumenline fixture can contain multiple reflectors, refer to oard and Reflector Layout for details. onsult factory for specific applications. Regular Output version, direct or indirect lighting: 6 watts per foot [0.3m], igh Output version, direct or indirect lighting: 2 watts per foot [0.3m]. 5/9

16 TYPIL WIRIN IRMS - continued Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Maximum run lengths - 7 maximum with 0ft [3m] fixture cord onfiguration/voltage 00V 20V 208V, 220V, 240V, 277V, 347V RO/RO 47ft [4.3m] 56ft [7.m] 63ft [9.2m] O/RO 32ft [9.8m] 36ft [m] 63ft [9.2m] Star Layout (MX/RM) % minimum dimming value for white light MX/RM Star Layout - Wiring detail I I or stable MX/RM data signal, do not split data wires after the X. - Third party MX/RM controller - ata input (elden 984 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-ST - Power input (00-347V) - Power and data output to fixture (wiring by others) - Junction box (by others) - Lumenline Surface Wall Mount, single unit I - Lumenline Surface Wall Mount, continuous run - rom X - Neutral - round - Line - ata + - ata - - Wire nuts (by others) - To fixture I - Junction box (by others) aisy hain Layout (MX/RM) % minimum dimming value for white light MX/RM aisy hain Layout - Wiring detail or stable MX/RM data signal, do not split data wires after the X. - Third party MX/RM controller - ata input (elden 984 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-S - Power input (00-347V) - Power and data output to fixture (wiring by others) - Junction box (by others) - Lumenline Surface Wall Mount, single unit or continuous run I - rom X - Neutral - round - Line - ata + - ata - - Wire nuts (by others) - To fixture I - Junction box (by others) 6/9

17 TYPIL WIRIN IRMS - continued Wiring olor ode IRT/INIRT LITIN SPS merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - MX/RM, Multiple feeds (MX/RM) - continued % minimum dimming value for white light MX/RM Multiple feeds - Wiring detail I I - Third party MX/RM controller - ata input (elden 984 or equivalent, by others) - X-S - ata output to next X (optional, not isolated/not boosted) - Power input, circuit # (00-347V) - Power input, circuit #2 (00-347V) - Power and data output to fixture (wiring by others) - Junction box (by others) I - Lumenline Surface Wall Mount, continuous run, multiple feeds - rom X - Neutral - round - Line - ata + - ata - - Wire nuts (by others) - To fixture I - Junction box (by others) onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum run length calculations are typically based on 4' [.2m] fixtures. ach white light lumenline reflector requires x MX/RM address, each R lumenline reflector requires 3x MX/RM addresses: a lumenline fixture can contain multiple reflectors, refer to oard and Reflector Layout for details. onsult factory for specific applications. Maximum of 32 MX/RM enabled reflectors per X output. Maximum of 4 MX/RM repeaters/x cascading in line. Maximum of 6 outputs per X-ST, maximum of output per X-S. or stable MX/RM data signal, do not split data wires after the X. Regular Output version, direct or indirect lighting: 6 watts per foot [0.3m], igh Output version, direct or indirect lighting: 2 watts per foot [0.3m]. 7/9

18 OW TO ORR - N IRT/INIRT LITIN LLI2S WM I WL ousing: LLI2S - Lumenline Surface 2" wide 2 Mounting: WM - Wall Mount 3 Light irection: 4 Voltage: I - irect/ lighting volts volts volts volts volts volts volts 7 Lighting: Output & olor temperature: iro 27K K regular output 6W/ft iro 30K K regular output 6W/ft iro 35K K regular output 6W/ft iro 40K K regular output 6W/ft io 27K K high output 2W/ft 2 io 30K K high output 2W/ft 2 io 35K K high output 2W/ft 2 io 40K K high output 2W/ft 2 iro R - Tri-color red, green and blue direct lighting 6W/ft 3 onsult factory for 6500K and 90+ RI. Optics: WL - Wide flood, 00 distribution, clear lens 8 ontrol: 5 Length: SU - Single Unit 2 /2 inches (37mm) SU2 - Single Unit 24 /4 inches (66mm) SU3 - Single Unit 36 /6 inches (96mm) SU4 - Single Unit 47 7/8 inches (26mm) SU5 - Single Unit 59 3/4 inches (58mm) SU6 - Single Unit 7 9/6 inches (88mm) SU7 - Single Unit 83 3/8 inches (29mm) SU8 - Single Unit 95 /4 inches (249mm) - ontinuous run, specify in ' increments. 6 irect Lighting: Output & olor temperature: dro 27K K regular output 6W/ft dro 30K K regular output 6W/ft dro 35K K regular output 6W/ft dro 40K K regular output 6W/ft do 27K K high output 2W/ft 2 do 30K K high output 2W/ft 2 do 35K K high output 2W/ft 2 do 40K K high output 2W/ft 2 dro R - Tri-color red, green and blue direct lighting 6W/ft 3 9 inish: NO - On/Off control LT - Lumentalk 5 IM - 0-0V imming option 6 LI - LI imming option 7 S - Lutron cosystem nabled imming 8 MX/RM - MX/RM enabled 9 K - lack Sandtex SI - Silver Sandtex W - Smooth white - ustom color and finish (please specify RL color) 0 0 Option: LL - lack painted louver SSL - Semi-specular louver - (certification covers uropean conomic rea) Photometric performance will vary with black and semi-specular louver options, see Photometric Information pages for more information. onsult factory for 6500K and 90+ RI. Optics: WL - Wide flood, 00 distribution, frosted lens N - Narrow flood, 30 distribution, highly reflective white painted louver 4 WW - True asymmetric wallwash, highly reflective white painted louver 4 347V is not available for ' [0.3m] lengths. 347V is not available for R color option or LT control option. 2 igh output direct lighting cannot be combined with high output indirect lighting. 3 R option requires MX/RM or LT control to be specified in ontrol section. 4 Not available for R color option. 5 Lumentalk system is enabled with L accessory for ' [0.3m] fixture lengths, see Typical Wiring iagrams pages for details. MX Lumentranslator and controller are required for R Lumentalk applications. Lumentalk is not available when R direct lighting is combined with R indirect lighting. 6 0% minimum dimming value. urrent Sink: 3m/fixture, urrent Source: 0.5m/fixture. 7 % minimum dimming value. vailable with white light only. onsult Typical Wiring iagram pages for the number of LI addresses per fixture length and type. 8 % minimum dimming value. vailable with white light only, not available for ' [0.3m] lengths. onsult Typical Wiring iagram pages for the number of cosystem addresses per fixture length and type. 9 % minimum dimming value for white light. ixtures set to by fixture resolution (consult the Resolution etails pages for the number of MX addresses per fixture length and type). 0 North merican RL colors specified with RL number only are provided with a smooth/high-gloss finish. Please consult factory for other RL textures and glosses, or to match alternate color charts. inal color matching results may vary. vailable for N and WW optics only. 8/9

19 OW TO ORR - SPS IRT/INIRT LITIN SPS LLI2S WM I L WL ousing: LLI2S - Lumenline Surface 2" wide 2 Mounting: WM - Wall Mount 3 Light irection: 4 Voltage: I - irect/ lighting 8 Lighting: Output & olor temperature: iro 27K K regular output 6W/ft iro 30K K regular output 6W/ft iro 35K K regular output 6W/ft iro 40K K regular output 6W/ft io 27K K high output 2W/ft 2 io 30K K high output 2W/ft 2 io 35K K high output 2W/ft 2 io 40K K high output 2W/ft 2 iro R - Tri-color red, green and blue direct lighting 6W/ft 3 onsult factory for 6500K and 90+ RI volts volts volts volts volts volts volts Optics: WL - Wide flood, 00 distribution, clear lens 9 ontrol: 5 Length: IMPORTNT: Side length up to 20 as a standard. onsult factory for any other shape requirements. L - L shape: specify side length (equal segments) 6 Joiner Type: LJ - Lit joiner, 7 inches nominal side length module UJ - Unlit joiner, 2 /6 inches (68mm) module (0.77kg/.7 lbs) 7 irect Lighting: Output & olor temperature: dro 27K K regular output 6W/ft dro 30K K regular output 6W/ft dro 35K K regular output 6W/ft dro 40K K regular output 6W/ft do 27K K high output 2W/ft 2 do 30K K high output 2W/ft 2 do 35K K high output 2W/ft 2 do 40K K high output 2W/ft 2 dro R - Tri-color red, green and blue direct lighting 6W/ft 3 0 inish: NO - On/Off control LT - Lumentalk 5 IM - 0-0V imming option 6 LI - LI imming option 7 S - Lutron cosystem nabled imming 8 MX/RM - MX/RM enabled 9 Option: K - lack Sandtex SI - Silver Sandtex W - Smooth white - ustom color and finish (please specify RL color) 0 LL - lack painted louver SSL - Semi-specular louver - (certification covers uropean conomic rea) Photometric performance will vary with black and semi-specular louver options, see Photometric Information pages for more information. onsult factory for 6500K and 90+ RI. Optics: N and WW optics not available for shapes with lit joiner. WL - Wide flood, 00 distribution, frosted lens N - Narrow flood, 30 distribution, highly reflective white painted louver 4 WW - True asymmetric wallwash, highly reflective white painted louver 4 347V is not available for ' [0.3m] lengths. 347V is not available for R color option or LT control option. 2 igh output direct lighting cannot be combined with high output indirect lighting. 3 R option requires MX/RM or LT control to be specified in ontrol section. 4 Not available for R color option and lit joiners. 5 MX Lumentranslator and controller are required for R Lumentalk applications. Lumentalk is not available when R direct lighting is combined with R indirect lighting. 6 0% minimum dimming value. urrent Sink: 3m/fixture, urrent Source: 0.5m/fixture. 7 % minimum dimming value. vailable with white light only. onsult Typical Wiring iagram pages for the number of LI addresses per fixture length and type. 8 % minimum dimming value. vailable with white light only. onsult Typical Wiring iagram pages for the number of cosystem addresses per fixture length and type. 9 % minimum dimming value for white light. ixtures set to by fixture resolution (consult the Resolution etails pages for the number of MX addresses per fixture length and type). 0 North merican RL colors specified with RL number only are provided with a smooth/high-gloss finish. Please consult factory for other RL textures and glosses, or to match alternate color charts. inal color matching results may vary. vailable for N and WW optics only. 9/9