Direct Lighting Output (nominal lumens) Direct Lighting Colour Temperature. Direct Lighting Optics (nominal distribution)

Transcription

1 Dummy Specification sheet Front view Bottom view Photometric Summary Description The Lumenalpha Cylinder is a high-performance LED luminaire that is ideal for commercial, residential or hospitality applications and delivers up to 3000 lumens from a 102 mm diameter. The comes in a number of finishes, or can be colour-specified to fit your taste. Its accessories, beam angles, trims, and optics are easily and quickly changeable in the field. Features Optics Control Mounting Option Suspension Length Light Direction Length Direct Lighting Output (nominal lumens) Direct Lighting Colour Temperature Direct Lighting Optics (nominal distribution) Optical Accessories Warranty Electrical cable mounting (flat canopy or deep canopy), Stem mounting (flat canopy or deep canopy), Track mounting Metal pipe (305 mm, 610 mm, 914 mm or 1219 mm), Pendant cable (1270 mm, 2540 mm or 6350 mm, field adjustable) Direct lighting 330 mm, 457 mm, 584 mm 700lm, 1000lm, 1300lm, 2000lm, 3000lm 2200K, 2700K, 3000K, 3500K, 4000K Narrow spot 10, Narrow 20, Medium 40, Wide 60, True asymmetric wallwash, Double Asymmetric Snoot, Half snoot, Clear glass lens, Softening glass lens, Linear spread lens narrow (1 x 40 ), Linear spread lens wide (1 x 60 ), Honeycomb louvre 5-year limited warranty Rating 1 / 23

2 Performance Maximum Delivered Output Up to 4,067 lm (narrow spot optic, 4000K, CRI 80) Maximum Delivered Intensity Up to 44,396 cd (narrow spot optic, 4000K, CRI 80) Efficacy Up to 118 lm/w (narrow spot optic, 4000K, CRI 80) Colour Consistency 2 SDCM Colour Rendering CRI 80+/CRI 95+ Lumen Maintenance UGR L95 55,000 hrs, L70 225,000 hrs < 19 (not applicable to WW and DAS distributions) Physical Housing Material TIR Optics Material Reflector Material Weight Aluminium Clear polycarbonate (narrow spot and narrow optics) Aluminium (medium and wide optics) Up to 3.46 kg Electrical and control Voltage 120 volts, 277 volts, 347 volts Control On/Off control, Phase dimming, Pro Phase dimming, 0-10V (1% linear or logarithmic), Pro 0-10V (0.1% linear or logarithmic), DALI (0.1% linear or logarithmic), Lumentalk, Lutron EcoSystem Enabled dimming, DMX/RDM enabled Environmental Environment Damp location (interior applications only) Operating Temperature -20 C to 30 C IP Rating IP20 Accessories (order separately) Control Boxes Control Systems Power and control box - star configuration, Power and control box - daisy chain configuration Lumentouch 2.0, Lumencue, Lumentone, Pharos TPC, Pharos LPC X, Pharos LPC, consult control systems section for details 2 / 23

3 Fixture dimensions (shown with flat canopy & cable options) The fixture uses an electrical cable for its pendant cable. 3 / 23

4 Mounting options (330 mm fixture shown) Flat canopy & cable option Deep canopy & cable option The fixture uses an electrical cable for its pendant cable. Flat canopy & stem option The fixture uses an electrical cable for its pendant cable. Deep canopy & stem option 4 / 23

5 Track mounting option 5 / 23

6 Photometric information - direct lighting optics Narrow Spot (nominal 10 ), 4000K Narrow (nominal 20 ), 4000K M - Medium (nominal 40 ), 4000K 6 / 23

7 W - Wide (nominal 60 ), 4000K Delivered wattage: +/- 10% tolerance. Add 3 watts per fixture when specifying Lumentalk. Preliminary, consult website for latest IES files. Delivered output: +/- 10% tolerance. 7 / 23

8 Photometric information Colour rendering options comparison, 3000K Control Refer to How to order pages for exceptions *Consult factory for Pro Phase dimming option 8 / 23

9 Typical wiring diagrams On/Off control (NO) A - Power input ( V) B mm octagonal/round junction box (by others) C - Power wiring (by others) D - Lumenalpha Cylinder Small On/Off control (NO) - wiring detail A - Power input or from previous fixture B - To fixture C - To next fixture D - Live E - Ground F - Neutral G - Wire-nuts (by others) H mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Consult Photometric Information pages for wattage information. 9 / 23

10 Phase dimming (PH, PPH) A - Third party Phase dimmer B - Phase dimmed power circuit (120V) C - Power wiring (by others) D mm octagonal/round junction box (by others) E - Lumenalpha Cylinder Small Phase dimming (PH, PPH) - wiring detail A - Power input or from previous fixture B - To fixture C - To next fixture D - Live E - Ground F - Neutral G - Wire-nuts (by others) H mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Consult Photometric Information pages for wattage information. 10 / 23

11 0-10V dimming (DA1, DA2, DA3, PDA1, PDA2) A - Third party dimmer B - Data wiring (by others) C - Power input ( V) D - Power and data wiring (by others) E mm octagonal/round junction box (by others) F - Lumenalpha Cylinder Small 0-10V dimming (DA1, DA2, DA3, PDA1, PDA2) - wiring detail A - Power input or from previous fixture B - To fixture C V + D V - E - To next fixture F - Live G - Ground H - Neutral I - Wire-nuts (by others) J - From third party dimmer K mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Consult Photometric Information pages for wattage information. 11 / 23

12 DALI dimming (DALI1, DALI2, SDALI1, SDALI2) A - Third party DALI controller B - Data wiring (by others) C - Power input ( V) D - Power and data wiring (by others) E mm octagonal/round junction box (by others) F - Lumenalpha Cylinder Small DALI dimming (DALI1, DALI2, SDALI1, SDALI2) - wiring detail A - Power input or from previous fixture B - To fixture C - Data + D - Data - E - To next fixture F - Live G - Ground H - Neutral I - Wire-nuts (by others) J - From third party DALI controller K mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 64 fixtures per DALI loop. Consult Photometric Information pages for wattage information. 12 / 23

13 Lutron EcoSystem Enabled dimming (ES) A - Lutron EcoSystem controller B - Data wiring (by others) C - Power input ( V) D - Power and data wiring (by others) E mm octagonal/round junction box (by others) F - Lumenalpha Cylinder Small Lutron EcoSystem Enabled dimming (ES) - wiring detail A - Power input or from previous fixture B - To fixture C - Data + D - Data - E - To next fixture F - Live G - Ground H - Neutral I - Wire-nuts (by others) J - From Lutron EcoSystem controller K mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Each Lutron EcoSystem enabled fixture has its own address; for the example shown, there are a total of 3 EcoSystem addresses. Consult Photometric Information pages for wattage information. 13 / 23

14 Lumentalk (LT) A - Third party dimmer/controller B - Lumentranslator (LTL-010, -DMX, -TRIAC, -DALI) C - Data wiring (by others) D - Power line ( V AC) E mm octagonal/round junction box (by others) F - Power wiring (by others) G - Lumenalpha Cylinder Small Lumentalk (LT) - wiring detail A - Power input (control over power line via Lumentalk system) or from previous fixture B - To fixture C - To next fixture D - Live E - Ground F - Neutral G - Wire-nuts (by others) H mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Lumentalk enabled fixtures must be commissioned using LumentalkID software and a LID-LT. Consult factory for details. Maximum of 1 transmitter (Lumentranslator or Lumenlink) per system. No third party fixtures allowed on the same circuit. For DMX applications: 1 DMX controller per Lumentalk network, maximum of 48 DMX channels per Lumentalk network (minimum step transition update rate is 1 second, minimum fade time between two colours is 1 minute). Consult factory for applications that require additional capabilities. Consult factory for DALI Lumentalk applications. Consult Photometric Information pages for wattage information. 14 / 23

15 Star Layout (DMX/RDM) A - Third party DMX/RDM controller B - Data input (Belden 9841 or equivalent, by others) C - Data output to next CBX (optional, not isolated/not boosted) D - CBX-ST E - Power input ( V) F - Power and data output to fixture (wiring by others) G mm octagonal/round junction box (by others) H - Lumenalpha Cylinder Small Star Layout (DMX/RDM) - wiring detail A - From CBX or previous fixture B - Lumenterminator* C - To fixture D - Data - E - Data + F - Neutral G - Ground H - Live I - Wire-nuts (by others) J mm octagonal/round junction box (by others) Wiring colour code Consult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 32 DMX/RDM enabled fixtures per CBX output. Maximum of 4 DMX/RDM repeaters/cbx cascading in line. Maximum of 6 outputs per CBX-ST. Each fixture requires 1 DMX address. Consult Photometric Information pages for wattage information. *DMX terminator is required at the end of each run to maintain data integrity. (6x) DMX lumenterminator included per CBX-ST. See installation instructions for details. 15 / 23

16 Daisy Chain Layout (DMX/RDM) Wiring colour code A - Third party DMX/RDM controller B - Data input (Belden 9841 or equivalent, by others) C - Data output to next CBX (optional, not isolated/not boosted) D - CBX-DS E - Power input ( V) F - Power and data output to fixture (wiring by others) G mm octagonal/round junction box (by others) H - Power and data wiring (by others) I - Lumenalpha Cylinder Small Daisy Chain Layout (DMX/RDM) - wiring detail (first or middle of run) Daisy Chain Layout (DMX/RDM) - wiring detail (end of run) A - From CBX or previous fixture B - To fixture C - Data + D - Data - E - To next/from previous fixture F - Live G - Ground H - Neutral I - Wire-nuts (by others) J mm octagonal/round junction box (by others) A - From CBX or previous fixture B - Lumenterminator* C - To fixture D - Data - E - Data + F - Neutral G - Ground H - Live I - Wire-nuts (by others) J mm octagonal/round junction box (by others) Consult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 32 DMX/RDM enabled fixtures per CBX output. Maximum of 4 DMX/RDM repeaters/cbx cascading in line. Maximum of 1 output per CBX-DS. Each fixture requires 1 DMX address. Consult Photometric Information pages for wattage information. *DMX terminator is required at the end of each run to maintain data integrity. (2x) DMX lumenterminator included per CBX-DS. See installation instructions for details. 16 / 23

17 Finishes 17 / 23

18 Optical Accessories SN-Snoot SN-Snoot - SN - - MBK (please specify exterior finish) HSN-Half snoot HSN-Half snoot - HSN - - MBK (please specify exterior finish) 18 / 23

19 CL-Clear glass lens SL-Softening glass lens - CL LSN-Linear spread lens narrow (1 x 40 ) - SL LSW-Linear spread lens wide (1 x 60 ) - LSN - LSW HL-Honeycomb louvre - HL Accessories (order separately) Control Boxes CBX-ST-Power and control box - star configuration CBX-DS-Power and control box - daisy chain configuration DMX/RDM control box. Up to six power and data outputs to fixtures or fixture runs. Ethernet enabled option. Refer to CBX specification sheet for details. DMX/RDM control box. One power and data output to fixture or fixture run. Ethernet enabled option. Refer to CBX specification sheet for details. 19 / 23

20 Control Systems LTO2-Lumentouch 2.0 LCU-Lumencue Lumentouch is a wall mount DMX 512 controller keypad. LTN-Lumentone Lumencue is a USB / mini SD DMX 512 controller. TPC-Pharos TPC The Pharos Touch Panel Controller (TPC) is a wall-mounted DMX512 controller with a capacitive touch screen. Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback. LPC X-Pharos LPC X LPC-Pharos LPC The Pharos Lighting Playback Controller X (LPC X) is designed for large-scale lighting installations and extremely complex lighting projects. The Pharos Lighting Playback Controller (LPC) is designed for small and mid-size lighting installations. 20 / 23

21 How to order 1. Housing 2. Certification Lumenalpha Cylinder Small - Ø102 mm A UL/cUL 3. Mounting 4. Mounting Option Finish (4) PMF Pendant mount flat canopy MWH Matte white PMD Pendant mount deep canopy MBK Matte black PSF Pendant stem mount flat canopy (1) MSI Matte silver PSD Pendant stem mount deep canopy (1) CC Custom colour (5) (6) PMTW Pendant track mount (aircraft cable), white adapter (2) (3) 5. Mounting Length PMTB Pendant track mount (aircraft cable), black M1 Metal pipe (305 mm) (7) adapter (2) (3) M2 Metal pipe (610 mm) (7) M3 Metal pipe (914 mm) (7) M4 Metal pipe (1219 mm) (7) CA50 CA100 CA250 ACC50 ACC100 ACC250 Electrical cable pendant (1270 mm, field adjustable) Electrical cable pendant (2540 mm, field adjustable) Electrical cable pendant (6350 mm, field adjustable) (8) (8) (8) Aircraft Cable (1270 mm, field adjustable) Aircraft Cable (2540 mm, field adjustable) Aircraft Cable (6350 mm, field adjustable) (9) (9) (9) 6. Light Direction D Direct lighting 7. Voltage volts volts volts (10) 8. Length 9. Direct Lighting Output (nominal lumens) mm mm mm dl07 dl10 dl13 dl20 dl30 700lm 1000lm 1300lm 2000lm 3000lm 21 / 23

22 10. Direct Lighting Colour Temperature 11. Direct Lighting Colour Rendering 22K 2200K (11) CR80 CRI K 2700K CR95 CRI K 3000K RCR80 Radiant CRI 80+ (12) 35K 3500K RCR95 Radiant CRI95+ (12) 40K 4000K 12. Direct Lighting Optics (nominal distribution) NS Narrow spot 10 N Narrow 20 M Medium 40 W Wide 60 WW True asymmetric wallwash (13) (14) DAS Double Asymmetric (13) (15) 13. Direct Lighting Control 14. Direct Lighting Accessories (13) (23) (24) NO On/off control (16) NA No accessory PH Phase dimming (17) (18) SN Snoot (25) PPH Pro Phase dimming (18) (19) (20) HSN Half snoot (25) DA1 0-10V dimming 1% linear (16) CL Clear glass lens DA2 0-10V dimming 1% logarithmic (16) SL Softening glass lens DA3 0-10V dimming, 1% linear (347V) (17) LSN Linear spread lens narrow (1 x 40 ) (26) (27) PDA1 Pro 0-10V dimming, 0.1% linear (16) LSW Linear spread lens wide (1 x 60 ) (27) (28) PDA2 Pro 0-10V dimming, 0.1% logarithmic (16) HL Honeycomb louvre DALI1 DALI2 Pro DALI dimming 0.1% linear (17) Pro DALI dimming 0.1% logarithmic (17) 15. Finish ES Lutron EcoSystem Enabled dimming (20) MWH Matte white LT Lumentalk dimming (21) (22) MBK Matte black DMX/RDM DMX/RDM enabled (21) MBR Matte brown MOR Matte orange MGR Matte green MBL Matte blue MSI Matte silver GWH Glossy white GBK Glossy black GYL Glossy yellow GLR Glossy red GVI Glossy violet GGR Glossy green GIY Glossy ivory CGY Concrete grey MLG Metalised grey IBR Italian brick red PWH Parget white CC Custom colour and finish (please specify RAL colour) (5) 16. Bezel b Bezel 22 / 23

23 17. Bezel Finish Notes: MWH Matte white (1) Stem finish matches fixture housing colour. MBK Matte black (2) Order track separately. MBR Matte brown (3) Available with 120V voltage option only. Available with NO, PH, PPH and LT control options only. MOR Matte orange (4) Not applicable to track mounting. MGR Matte green (5) Longer lead times can be expected for custom RAL colour finishes. MBL MSI GWH GBK GYL GLR GVI Matte blue Matte silver Glossy white Glossy black Glossy yellow Glossy red Glossy violet (6) (7) (8) (9) (10) (11) Refer to Finish section for additional colour codes (ex. MGR). Available for PSF and PSD mounting options only. Electrical cable pendant available for PMF and PMD mounting options only. Aircraft cable pendant available for PMTW and PMTB mounting options only. Available with on/off (NO) and 0-10V dimming (DA3) control options only. Available for CR80 only. GGR Glossy green (12) Radiant CRI options available for 3000K only. GIY Glossy ivory (13) Optical accessories are not available for WW or DAS optics. CGY Concrete grey (14) The colour of the true asymmetric wallwash baffle matches the fixture bezel. MLG IBR PWH CC Metalised grey Italian brick red Parget white Custom colour and finish (please specify RAL colour) (5) (15) (16) The colour of the double asymmetric baffle is metallic grey. Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) and 2000 lumens (CR80 or RCR80) for NS and WW distributions. Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) for DAS distribution. Available up to 2000 lumens (CR80, RCR80, CR95 or RCR95) and 3000 lumens (CR80 or RCR80) for N, M and W distributions. (17) Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95), 2000 lumens (CR80 or RCR80) and 3000 lumens (CR80 or RCR80) for NS and WW distributions. Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) for DAS distribution. Available up to 2000 lumens (CR80, RCR80, CR95 or RCR95) and 3000 lumens (CR80 or RCR80) for N, M and W distributions. (18) (19) Available for 120V voltage option only. Consult factory for Pro Phase dimming option. (20) Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) and 2000 lumens (CR80 or RCR80) for NS, N, M, W and WW distributions. Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) for DAS distribution. (21) Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) and 2000 lumens (CR80 or RCR80) for NS and WW distributions. Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) for DAS distribution. Available up to 1300 lumens (CR80, RCR80, CR95 or RCR95) and 2000 lumens (CR80, RCR80, CR95 or RCR95) for N, M and W distributions. (22) A Lumentranslator and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator and Lumentalk pages and specification sheets for details. (23) Accessories specified in the fixture code are factory installed but can also be changed in the field. Refer to installation instructions for details. To order accessories separately, refer to the Accessories section of the specification sheet. (24) Maximum of two lenses can be installed per fixture. The snoot or half snoot can be combined with any accessory. The clear glass lens and softening glass lens cannot be combined together. The linear spread lenses (LSN and LSW) are compatible with the snoot and half snoot accessories only. (25) (26) (27) Matte black interior surface, exterior finish matches housing colour. Nominal 10 x 40 distribution when used with the NS optic. Available for NS and N optics only. (28) Nominal 10 x 60 distribution when used with the NS optic. 23 / 23