Specification Sheet lumenline 2

Transcription

1 lient Project name Order# Type Qty TURS N NITS Physical : luminum extrusion housing, 2" wide vailable in ' to 8' sections ontinuous runs available in ' increments urable polyester powder coat finish for trim Wide flood, true asymmetric wallwash or narrow flood direct lighting optics Wallwash and narrow flood optics provided with white painted louvers lack painted or semi-specular louver finish optional Wide flood optic provided with frosted extruded acrylic lens lange, flangeless and spackle flange trim options available Illuminated corners available for custom configurations, consult factory for availability and orders Tool-less system for reflector assembly and control gear access Suitable for use with drywall ceiling and metal pan ceilings (millwork ceilings) ompatible with motion sensors option available ry location only IK05 rated Performance : vailable in 2700K, 3000K, 3500K, 4000K or R color mixing RI value: 80+ inning within a 2 step Macdam ellipse (white light only) Lumen maintenance: 00,000 hrs 25 ] Lumen measurements comply with LM standard Resolution per foot or per fixture (configured with LumenI V3 software & MX/RM) Operating temperatures: -25 to 50 [-3 to 22] lectrical : Line voltage luminaire for 00 to 347V 6W/ft Regular Output version 2W/ft igh Output version 6W/ft optional R source imming options for white light: Lumentalk, 0-0 volt, LI, Lutron cosystem or MX/RM enabled ontrol options for R: Lumentalk or MX/RM enabled Quick connectors for continuous runs 2 [68mm] IK05 Performance summary ased on RO, all color temperatures, White painted louver for N and WW optics. Optic Wide flood Narrow flood True asymmetric wallwash Wide flood (00 ) irect elivered output [lm/ft] Lumens/ Watt [lm/w] Photometric performance is measured in compliance with ISN LM Narrow flood (30 x 60 ) RONT VIW 2 5, 24, 36 2 ", 48 5, 60 3, 72 ", ", 95 [329mm, 627mm, 927mm, 227mm, 529mm, 829mm, 230mm, 2430mm] 5 SI VIW 3 [84mm] 3 7 [88mm] True asymmetric wallwash OTTOM VIW, WI LOO OPTI SOWN LN TRIM OPTION SOWN /2 onsult

2 POTOMTRI INORMTION - IRT LITIN OPTIS WL - Wide flood (00 ), all color temperatures ottom view, flange trim option frosted lens andlepower distribution 4ft, O elivered output, 4ft fixture [lm] RO O White light R RI Value: N/ lare evaluation, white light X=4, Y= 8 Reflectances: 70/50/20 RO O UR transversal <22 <25 UR axial <22 <25 N - Narrow flood (30 x 60 ), all color temperatures Not available for R or lit joiners ottom View, flange trim option narrow flood louver andlepower distribution 4ft, O White louver lack louver Semi-specular louver elivered output, 4ft fixture [lm] RO O White louver lack louver 042* 894 Semi-specular 829* RI Value: lare evaluation, white louver X=4, Y= 8 Reflectances: 70/50/ RO O UR transversal <9 <9 UR axial <9 <9 WW - True asymmetric wallwash, all color temperatures Not available for R or lit joiners ottom view, flange trim option wallwash louver andlepower distribution, 4ft, O White louver lack louver Semi-specular louver elivered output, 4ft fixture [lm] RO O White louver lack louver 74* Semi-specular RI Value: * Notes: * stimated. onsult website for latest IS and LT fi les. 2/2 onsult

3 LOUVR INSTLLTION TIL Narrow lood Symmetrical louver design, no specific orientation required OTTOM VIW, LN TRIM OPTION True symmetric Wallwash lways position louver blades toward the wall Standard feeding side (left hand side when facing the wall) Setback from wall should be /7 of the wall height. xample: ' 5" [432mm] setback for a0ft [3048mm] wall. OTTOM VIW, LN TRIM OPTION 3/2 onsult

4 TRIM OPTION lange trim option L langeless trim option S Spackle lange trim option TRIM OPTION IMNSIONS langeless and Spackle flange trim options [84mm] [68mm] RONT VIW 2, 23 3, ", 47 7 ", 59 5 " 6 6, 7 8 ", 83 ", 94 3 [306mm, 605mm, 905mm, 205mm, 507mm, 807mm, 208mm, 2408mm] OTTOM VIW LNLSS TRIM OPTION SOWN (US SM IMNSIONS OR SPKL LN OUSIN) ILIN OR WLL UTOUT IMNSIONS 2 7, 24 3, 36 ", 47 3, 59, 7 2 ", 83 3 " 3 8, 95 [35mm, 64mm, 94mm, 25mm, 56mm, 86mm, 27mm, 247mm] " [73mm] LN ILIN OR WLL UTOUT IMNSIONS 2 3, 23 5, ", 47 9,59 7, 7 4 ", 83 ", 94 5 " 8 6 [30mm, 608mm, 908mm, 209mm, 50mm, 80mm, 2mm, 242mm] 2 3 [7mm] LNLSS ILIN OR WLL UTOUT IMNSIONS 2 3, 23 5, ", 47 9, 59 7, 7 4 ", 83 ", 94 5 " 8 6 [30mm, 608mm, 908mm, 209mm, 50mm, 80mm, 2mm, 242mm] 2 5 [75mm] SPKL LN ILIN OR WLL UTOUT IMNSIONS 4/2 onsult

5 VRTIL MOUNTIN OPTION eiling to wall configurations, single units and continuous runs See lange trim option dimensions on page See langeless trim option dimensions on page [88mm] RONT VIW LN TRIM OPTION SOWN SI VIW RONT VIW LNLSS TRIM OPTION SOWN (US SM IMNSIONS OR SPKL LN OUSIN) SI VIW [84mm] [68mm] OTTOM VIW [84mm] [68mm] OTTOM VIW 5/2 onsult

6 TR RO MOUNTIN OL PTTRN langeless trim option shown " " " mm [252mm] 27mm TR RO MOUNTIN TIL lange, spackle flange and flangeless trim options ft TOP VIW 4 " TYP. 7mm " 2 " " mm [55mm] 27mm TYP. 4 " [7mm] Ø 4 " 2ft TOP VIW 3 " [75mm] TOP VIW 5 " 6 [29mm] " " [256mm] [97mm] [97mm] 0 [256mm] TYPIL IN LOTION 3ft TOP VIW TOP VIW [256mm] [347mm] [347mm] [256mm] Treaded rods and nuts by others. 4ft TOP VIW 5ft " " 0 [256mm] [498mm] [498mm] [256mm] TOP VIW RONT VIW 0 9 " 0 [256mm] [406mm] [483mm] [406mm] [256mm] 6ft TOP VIW 0 20 " " 20 " 0 [256mm] [508mm] [58mm] [508mm] [256mm] 7ft TOP VIW 0 24 " " [256mm] [60mm] [678mm] [60mm] [256mm] 8ft TOP VIW 6/2 onsult

7 LIT JOINR TYPS N IMNSIONS Refer to the SP ordering page Not available for true asymmetric wallwash and narrow flood optics NR orizontal 90 o Used to build square, rectangle and L shapes (quivalent of a 4 fixture) TNR Tee 90 o (quivalent of a 6 fixture) NR ross 90 o (quivalent of an 8 fixture) 3 5 " 6 [354mm] 3 5 [354mm] 5 3 " 6 [354mm] TOP VIW 7 7 " 6 [443mm] 3 5 [84mm] TOP VIW " [797mm] 3 5 [84mm] TOP VIW " [797mm] 3 5 [84mm] RONT VIW LN TRIM OPTION SOWN RONT VIW LN TRIM OPTION SOWN RONT VIW LN TRIM OPTION SOWN INR Inside 90 o or eiling to Wall onfigurations (quivalent of a 4 fixture) 3 5 [84mm] TOP VIW " [365mm] " [448mm] RONT VIW LN TRIM OPTION SOWN 7/2 onsult

8 ROTTIN ROSSR MOUNTIN OPTION vailable with lange trim option only TOP VIW ROTTIN ROSSR LOS TOP VIW ROTTIN ROSSR OPN " [8mm] " [8mm] MXIMUM 5 [24mm] " [73mm] MXIMUM 5 [24mm] 5 9 [42mm] " [25mm] SI VIW ROTTIN ROSSR LOS SI VIW ROTTIN ROSSR OPN 8/2 onsult

9 SSORIS Order separately ontrol Systems: ontrol oxes: LTO2 LU LI LI-LT LTN X L Lumentouch is a wall mount MX 52 controller keypad. Lumencue is a US / mini S MX 52 controller. LumenI is a diagnostic and addressing MX 52 controller. It must be specifi ed for all MX applications. Refer to LI specifi cation sheet for details. LumentalkI is a diagnostic and addressing controller. It must be specifi ed for all Lumentalk (LT) applications. Refer to LI-LT specifi cation sheet for details. Lumentone is a simple pre-programmed MX 52 controller with a push button rotary dial and live feedback. MX/RM control box. Up to six power and data outputs to fi xtures or fi xture runs. thernet enabled option. Refer to X specifi cation sheet for details. Lumentalk ata ridge, 0-0V or MX output. Refer to L specifi cation sheet for details. 9/2 onsult

10 RSOLUTION TILS pplicable for MX/RM control option only. ixture resolution can be configured on-site within the LumenI V3 software. MX/RM enabled X is required. Resolution per foot: each foot is addressed independently Total number of MX addresses required per fixture W Single units ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft R Lit joiners NR TNR NR INR 4 2 Resolution per fixture: each reflector is addressed independently Total number of MX addresses required per fixture Single units ft to 4ft 5ft to 8ft W 2 R 3 6 Lit joiners NR TNR NR INR 3 OR N RLTOR LYOUT PR IXTUR LNT ft 2ft 3ft 4ft Reflector Reflector 2 Reflector 2 3 Reflector ft Reflector 2 3 Reflector ft Reflector 2 3 Reflector ft Reflector Reflector ft Reflector Reflector /2 onsult

11 RSOLUTION TILS - continued LIT JOINRS IN Reflector NR orizontal 90 Reflector 2 Reflector TNR Tee 90 Reflector 2 Reflector Reflector NR ross 90 Reflector 2 Reflector Reflector 4 8 INR Inside 90 2 Reflector Reflector /2 onsult

12 RSOLUTION TILS - continued xample: MX addresses, resolution per foot, 8ft fixture and NR lit joiner, 2, 3 2 4, 5, 6 Reflector 2 4 0,, 2 3 7, 8, 9 8ft Reflector Reflector 2 NR ross 90 Reflector Reflector 3, 2, 3 2 4, 5, 6 3 7, 8, 9 4 0,, , 23, , 20, 2 6 6, 7, 8 5 3, 4, 5 7 9, 20, , 23, 24 Reflector 4 6 3, 4, 5 5 6, 7, 8 White light version R version xample: MX addresses, resolution per fixture, 8ft fixture and NR lit joiner, 2, 3 Reflector 2 8ft Reflector Reflector 2 NR Reflector Reflector 3 ross 90, 2, 3 2 4, 5, 6 Reflector 4 2, 2, 3 2/2 onsult

13 TYPIL WIRIN IRMS Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Non-imming (NO) Non-imming (NO) - Wiring detail - Power input (00-347V) - Junction box (by others) - Power wiring (by others) - Lumenline Recessed, single unit - Lumenline Recessed, continuous run Notes: onsult factory for specific applications and maximum fixture count/cable length recommendations. Regular Output version: 6 watts per foot [0.3m], igh Output version: 2 watts per foot [0.3m]. - Power input or from previous fixture - To fixture - To next fixture - Line - round - Neutral - Wire-nuts (by others) - Junction box (by others) Lumentalk (LT) % minimum dimming value 2' to 8' [0.6 to 2.4m] fixture lengths and continuous runs Lumentalk (LT) - Wiring detail (for 2' to 8' fixture lengths [0.6 to 2.4m] and continuous runs) - Third party dimmer/controller - Lumentranslator (LTL-00, -MX, -TRI, -LI) - ata wiring (by others) - Power line (20-277V ) - Junction box (by others) - Power wiring (by others) - Lumenline Recessed, single unit (2' to 8' fixture lengths) [0.6 to 2.4m] - Lumenline Recessed, continuous run - Power input (control over power line via Lumentalk system) or from previous fixture - To fixture - To next fixture - Line - round - Neutral - Wire-nuts (by others) - Junction box (by others) 3/2 onsult

14 TYPIL WIRIN IRMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Lumentalk (LT) - continued % minimum dimming value ' [0.3m] fixtures Lumentalk (LT) - Wiring detail (for ' fixtures [0.3 m]) J I - Third party dimmer/controller - Lumentranslator (LTL-00, -MX, -TRI, -LI) - ata wiring (by others) - Power line (20-277V ) - Lumentalk ata ridge (L-IM or L-MX) - Junction box (by others) - Power wiring (by others) - Lumenline Recessed, single unit (' [0.3m] fixture length) - rom Lumentalk ata ridge (control over power line via Lumentalk system) or from previous fixture - To fixture - 0-0V + / ata V - / ata - - To next fixture - Line - round - Neutral I - Wire-nuts (by others) J - Junction box (by others) Wiring detail using L-IM or L-MX (for ' fixtures [0.3 m]) - Power input (control over power line via Lumentalk system) - round - Line - Neutral - 0-0V + / ata V - / ata - - To fixture Notes: onsult factory for specific applications and maximum fixture count/cable length recommendations. Lumentalk ata ridge required for ' [0.3m] fixture lengths. or white light applications with all fixtures controlled as zone: fixtures and Lumentalk ata ridge must be specified as IM. Maximum of 0 fixtures per L-IM, consult factory for applications that require additional capabilities. or white light and R applications with fixtures controlled individually: fixtures and Lumentalk ata ridge must be specified as MX, 2-step commissioning process: - MX/RM system using LumenI software and a LI, 2 - Lumentalk system using LumentalkI software and a LI-LT. Maximum of 32 fixtures per L-MX. onsult factory for details. or MX applications: MX controller per Lumentalk network, maximum of 48 MX channels per Lumentalk network (minimum step transition update rate is second, minimum fade time between two colors is minute). R MX applications require a MX Lumentranslator (LTL-MX) and a MX controller. onsult factory for details and applications that require additional capabilities. Maximum of transmitter (Lumentranslator or Lumenlink) per system. No third party fixtures allowed on the same circuit. onsult factory for LI Lumentalk applications. Regular Output version: 6 watts per foot [0.3m], igh Output version: 2 watts per foot [0.3m]. 4/2 onsult

15 TYPIL WIRIN IRMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - 0-0V imming (IM) 0% minimum dimming value 0-0V imming (IM) - Wiring detail K I J - Power input (00-347V) - Third party dimmer - ata wiring (by others) - Power and data wiring (by others) - Junction box (by others) - Lumenline Recessed, single unit - Lumenline Recessed, continuous run - Power input or from previous fixture - To fixture - 0-0V V - - To next fixture - Line - round - Neutral I - Wire-nuts (by others) J - rom third party dimmer K - Junction box (by others) Notes: onsult factory for specific applications and maximum fixture count/cable length recommendations. 0-0V m ratings: passive dimmer (urrent Sink): 3m per fixture, active dimmer (urrent Source): 0.5m per fixture. Regular Output version: 6 watts per foot [0.3m], igh Output version: 2 watts per foot [0.3m]. 5/2 onsult

16 TYPIL WIRIN IRMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - LI imming (LI) % dimming value LI imming (LI) - Wiring detail K I J - Power input (00-347V) - Third party LI controller - ata wiring (by others) - Power and data wiring (by others) - Junction box (by others) - Lumenline Recessed, single unit - Lumenline Recessed, continuous run - Power input or from previous fixture - To fixture - ata + - ata - - To next fixture - Line - round - Neutral I - Wire-nuts (by others) J - rom LI controller K - Junction box (by others) Total number of LI addresses required per fixture x LI address per reflector Single units Lit joiners ft to 4ft 5ft to 8ft NR TNR NR INR W Notes: onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 64 LI addresses per LI loop. ach lumenline reflector requires x LI address: a lumenline fixture can contain multiple reflectors, refer to oard and Reflector Layout for details. onsult factory for specific applications. Regular Output version: 6 watts per foot [0.3m], igh Output version: 2 watts per foot [0.3m]. 6/2 onsult

17 TYPIL WIRIN IRMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Lutron cosystem nabled imming (S) % minimum dimming value Lutron cosystem nabled imming (S) - Wiring detail IM LI S K I J - Power input (00-347V) - Lutron cosystem controller - ata wiring (by others) - Power and data wiring (by others) - Junction box (by others) - Lumenline Recessed, single unit (2' to 8' fixture lengths) [0.6 to 2.4m] - Lumenline Recessed, continuous run - Power input or from previous fixture - To fixture - ata + - ata - - To next fixture - Line - round - Neutral I - Wire-nuts (by others) J - rom Lutron cosystem controller K - Junction box (by others) Total number of cosystem addresses required per fixture x cosystem address per reflector Single units Lit joiners 2ft to 4ft 5ft to 8ft NR TNR NR INR W Notes: onsult factory for specific applications and maximum fixture count/cable length recommendations. ach lumenline reflector requires x cosystem address: a lumenline fixture can contain multiple reflectors, refer to oard and Reflector Layout for details. onsult factory for specific applications. Regular Output version: 6 watts per foot [0.3m], igh Output version: 2 watts per foot [0.3m]. 7/2 onsult

18 TYPIL WIRIN IRMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - Maximum run lengths - 7 maximum with 0ft [3m] fixture cord onfiguration/voltage 00V 20V 208V 220V 240V 277V, 347V RO: Regular Output 93ft [28.3m] 6ft [35.4m] 26ft [38.4m] O: igh Output 46ft [4m] 56ft [7.m] 98ft [29.9m] 04ft [3.7m] 6ft [35.4m] 26ft [38.4m] Star Layout (MX/RM) % minimum dimming value for white light MX/RM Star Layout - Wiring detail I I or stable MX/RM data signal, do not split data wires after the X. - Third party MX/RM controller - ata input (elden 984 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-ST - Power input (00-347V) - Power and data output to fixture (wiring by others) - Junction box (by others) - Lumenline Recessed, single unit I - Lumenline Recessed, continuous run - rom X - To fixture - ata - - ata + - Neutral - round - Line - Wire nuts (by others) I - Junction box (by others) aisy hain Layout (MX/RM) % minimum dimming value for white light MX/RM aisy hain Layout - Wiring detail I or stable MX/RM data signal, do not split data wires after the X. - Third party MX/RM controller - ata input (elden 984 or equivalent, by others) - X-S - ata output to next X (optional, not isolated/not boosted) - Power input (00-347V) - Power and data output to fixture (wiring by others) - Junction box (by others) - Lumenline Recessed, single unit or continuous run - rom X - To fixture - ata - - ata + - Neutral - round - Line - Wire nuts (by others) I - Junction box (by others) 8/2 onsult

19 TYPIL WIRIN IRMS - continued Wiring olor ode merican olor ode olor ode US reen Yellow/reen round lack rown Live V White lue Neutral Red/Purple lack 0-0V / ata + Orange rey 0-0V / ata - MX/RM, Multiple feeds (MX/RM) - continued % minimum dimming value for white light MX/RM Multiple feeds - Wiring detail I I - Third party MX/RM controller - ata input (elden 984 or equivalent, by others) - X-S - ata output to next X (optional, not isolated/not boosted) - Power input, circuit # (00-347V) - Power input, circuit #2 (00-347V) - Power and data output to fixture (wiring by others) - Junction box (by others) I - Lumenline Recessed, continuous run, multiple feeds - rom X - To fixture - ata - - ata + - Neutral - round - Line - Wire nuts (by others) I - Junction box (by others) Notes: onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum run length calculations are typically based on 4' [.2m] fixtures. ach white light lumenline reflector requires x MX/RM address, each R lumenline reflector requires 3x MX/RM addresses: a lumenline fixture can contain multiple reflectors, refer to oard and Reflector Layout for details. onsult factory for specific applications. Maximum of 32 MX/RM enabled reflectors per X output. Maximum of 4 MX/RM repeaters/x cascading in line. Maximum of 6 outputs per X-ST, maximum of output per X-S. or stable MX/RM data signal, do not split data wires after the X. Regular Output version: 6 watts per foot [0.3m], igh Output version: 2 watts per foot [0.3m]. 9/2 onsult

20 OW TO ORR - N LLI2R ousing: 2 Voltage: 3 Length: LLI2R - Lumenline Recessed, 2" wide volts volts volts volts volts volts volts imension shown are for flangeless SU - Single Unit 2 /6 (306mm) SU2 - Single Unit 23 3/6 (605mm) SU3 - Single Unit 35 5/8 (905mm) SU4 - Single Unit 47 7/6 (205mm) SU5 - Single Unit 59 5/6 (507mm) SU6 - Single Unit 7 /8 (807mm) SU7 - Single Unit 83 (208mm) SU8 - Single Unit 94 3/6 (2408mm) - ontinuous run, specify in ' increments 4 irect Lighting: Output & olor temperature: dro 27K K regular output 6W/ft dro 30K K regular output 6W/ft dro 35K K regular output 6W/ft dro 40K K regular output 6W/ft do 27K K high output 2W/ft do 30K K high output 2W/ft do 35K K high output 2W/ft do 40K K high output 2W/ft dro R - Tri-color red, green and blue direct lighting 6W/ft 2 5 ontrol: NO - On/Off control LT - Lumentalk 4 IM - 0-0V imming option 5 LI - LI imming option 6 S - Lutron cosystem nabled imming 7 MX/RM - MX/RM enabled 8 6 Trim Option: - lange L - langeless S - Spackle lange 7 Trim inish: 8 Option: K - lack Sandtex SI - Silver Sandtex W - Smooth white - ustom color and finish (please specify RL color) 9 - hicago plenum rated option R - Rotating rossbar mounting 0 VS - Vertical mounting (ceiling to wall configurations, single units and continuous runs) LL - lack painted louver SSL - Semi-specular louver - (certification covers uropean conomic rea) Photometric performance will vary with black and semi-specular louver options, see Photometric Information pages for more information. onsult factory for 6500K and 90+ RI. Optics: WL - Wide flood, 00 distribution, frosted lens N - Narrow flood, 30 x 60 distribution, highly reflective white painted louver 3 WW - True asymmetric wallwash, highly reflective white painted louver 3 Notes: 347V is not available for ' [0.3m] lengths. 347V is not available for R color option or LT control option. 2 R option requires MX/RM or LT control to be specified in ontrol section. 3 Not available for R color option. 4 Lumentalk system is enabled with L accessory for [0.3m] fixture lengths, see Typical Wiring iagrams pages for details. MX Lumentranslator and controller are required for R Lumentalk applications. 5 0% minimum dimming value. urrent Sink: 3m/fixture, urrent Source: 0.5m/fixture. 6 % minimum dimming value. vailable with white light only. onsult Typical Wiring iagram pages for the number of LI addresses per fixture length and type. 7 % minimum dimming value. vailable with white light only, not available for ' [0.3m] lengths. onsult Typical Wiring iagram pages for the number of cosystem addresses per fixture length and type. 8 % minimum dimming value for white light. ixtures set to by fixture resolution (consult the Resolution etails pages for the number of MX addresses per fixture length and type). 9 North merican RL colors specified with RL number only are provided with a smooth/high-gloss finish. Please consult factory for other RL textures and glosses, or to match alternate color charts. inal color matching results may vary. 0 vailable for flange trim option only. rotating crossbar included for ' [305mm] lengths, 2 rotating crossbars included for 2' [60mm] to 5' [524mm] lengths, 3 rotating crossbars included for 6' [829mm] to 8' [2438mm] lengths. vailable for N and WW optics only. 20/2 onsult

21 OW TO ORR - LLI2R LJ ousing: 2 Voltage: 3 Length: LLI2R - Lumenline Recessed, 2" wide volts volts volts volts volts volts volts IMPORTNT: Side length up to 20 as a standard. onsult factory for any other shape requirements. S - Square shape: specify side length (equal sides) R x - Rectangular shape: specify longer side x shorter side L - L shape: specify side length (equal sides) T - T shape: specify side length (equal sides) X - ross shape: specify side length (equal sides) W_ - eiling to wall: specify side length (equal sides) 4 Joiner Type: LJ - Lit joiner, 7 inches nominal side length module 5 irect Lighting: Output & olor temperature: dro 27K K regular output 6W/ft dro 30K K regular output 6W/ft dro 35K K regular output 6W/ft dro 40K K regular output 6W/ft do 27K K high output 2W/ft do 30K K high output 2W/ft do 35K K high output 2W/ft do 40K K high output 2W/ft dro R - Tri-color red, green and blue direct lighting 6W/ft 2 6 ontrol: NO - On/Off control LT - Lumentalk 4 IM - 0-0V imming option 5 LI - LI imming option 6 S - Lutron cosystem nabled imming 7 MX/RM - MX/RM enabled 8 7 Trim Option: - lange L - langeless S - Spackle lange 8 Trim inish: 9 Option: K - lack Sandtex SI - Silver Sandtex W - Smooth white - ustom color and finish (please specify RL color) 9 - hicago plenum rated option R - Rotating rossbar mounting 0 LL - lack painted louver SSL - Semi-specular louver - (certification covers uropean conomic rea) Photometric performance will vary with black and semi-specular louver options, see Photometric Information pages for more information. onsult factory for 6500K and 90+ RI. Optics: N and WW optics not available for shapes with lit joiner. WL - Wide flood, 00 distribution, frosted lens N - Narrow flood, 30 x 60 distribution, highly reflective white painted louver 3 WW - True asymmetric wallwash, highly reflective white painted louver 3 Notes: 347V is not available for ' [0.3m] lengths. 347V is not available for R color option or LT control option. 2 R option requires MX/RM or LT control to be specified in ontrol section. 3 Not available for R color option and lit joiners. 4 MX Lumentranslator and controller are required for R Lumentalk applications. 5 0% minimum dimming value. urrent Sink: 3m/fixture, urrent Source: 0.5m/fixture. 6 % minimum dimming value. vailable with white light only. onsult Typical Wiringiagram pages for the number of LI addresses per fixture length and type. 7 % minimum dimming value. vailable with white light only. onsult Typical Wiring iagram pages for the number of cosystem addresses per fixture length and type. 8 % minimum dimming value for white light. ixtures set to by fixture resolution (consult the Resolution etails pages for the number of MX addresses per fixture length and type). 9 North merican RL colors specified with RL number only are provided with a smooth high-gloss finish. Please consult factory for other RL textures and glosses, or to match alternate color charts. inal color matching results may vary. 0 vailable for flange trim option only. rotating crossbar included for ' [305mm] lengths, 2 rotating crossbars included for 2' [60mm] to 5' [524mm] lengths, 3 rotating crossbars included for 6' [829mm] to 8' [2438mm] lengths. vailable for N and WW optics only. 2/2 onsult