Compose your system with the help of the example below. All components can be found on the following pages and need to be ordered separately.

Transcription

1 LAYOUT SYSTEM CONFIGURATION EXAMPLE Compose your system with the help of the example below. All components can be found on the following pages and need to be ordered separately. Electrical feed connection housing and cap kit L-Joiner for Recessed Trimless Modules (diffused optics only) Algoritmo Recessed with Trim Module (4 or 8 foot) 1 Algoritmo Linear Gear Plate (4 or 8 foot) 2 Algoritmo Linear Optics Pick your Algoritmo Recessed modules Pick your Linear Gear Plate Pick your corresponding Linear Optics Pick your essories Page : 1/5

2 BODY CODE MOUNTING USC-MAL TL Mounting TL = Recessed Trimless 4 = 4 Feet 8 = 8 Feet FEATURES: Construction: Modular structural body in extruded aluminum. Mounting: Mounts to ceiling with perforated flanges to be plastered and painted over (hardware not included). Suitable for ceiling thickness 5/8 maximum. Height clearance 4 1/4 min. Gear Plate, Linear diffuser optics and other essories sold separately; see following pages mm 4 1/4 108 mm Notes: For all other lengths and custom requests, please contact your local Artemide sales representative. 4FT 8FT 46 5/8 93 1/ mm 2368 mm mm 1 5/8 41 mm mm Page : 2/5

3 ALGORITMO LED SYSTEM - RECESSED WITH TRIM GEAR PLATE CODE TYPE EMISSION CRI CCT DRIVER USC-MAL G D 8 Type Emission CRI CCT Driver G = Gear Plate D = Direct 4 = 4 Feet 8 = 8 Feet 8 = 80 CRI min 30 = 3000K 35 = 3500K 40 = 4000K 08 = On/Off V dim (120/277V) 15 = On/Off V dim (347V) DU = DALI (120/277V) TECHNICAL DATA: (80 CRI 3000K model ratings) 2 5/16 59 mm Lamping: Internal gear plate with LED driver and linear LED array mounted on an independent heatsink for better heat dissipation. 3-step MacAdam ellipse. 4FT 8FT 46 9/ / mm 2367 mm Notes: Max rating for cumulative gear plates in a system: 6A per circuit. For custom requests, please contact your local Artemide sales representative. 1 7/16 37 mm Label: - suitable for dry locations ALGORITMO SYSTEM 80CRI 3000K 4FT DIRECT EMISSION 8FT DIRECT EMISSION Input Power: 34W 68W Input Current: 120VAC 277VAC 120VAC 277VAC 0.28A 0.12A 0.57A 0.25A Nominal Lumen: 4480lm 8960lm Delivered Lumen: Controlled Diffused Prismoptic Controlled Diffused Prismoptic lm lm lm lm lm lm Efficacy (lm/w): Efficiency (%): 46.1lm/W 35.0% 57.7lm/W 43.8% 74.3lm/W 56.4% 46.1lm/W 35.0% 57.7lm/W 43.8% 74.3lm/W 56.4% See following page for optics specifications and description. Page : 3/5

4 LINEAR OPTICS CONTROLLED EMISSION OPTICS USC-MALDC Injection-molded polycarbonate snap-in diffuser, with precise optical lens array for glare and emission control. Provides a narrower beam Max Candela = cd/klm 9 DIFFUSED OPTICS 90 9 USC-MALDD 12 = 12 Feet* Extruded polycarbonate snap-in diffuser, opal white color. Prevents LED pixelation with it s soft uniform glow. *12 foot diffuser allows for longer linear sections without interruption Max Candela = cd/klm PRISMOPTIC LENS OPTICS USC-MALDP Extruded polycarbonate snap-in diffuser, with light-guiding grid. Controls glare by altering the angle of incidence of the ray, therefore minimizing output loss Max Candela = cd/klm 9 Page : 4/5

5 ACCESSORIES ELECTRICAL FEED CONNECTION HOUSING AND END CAP KIT FOR RECESSED TRIMLESS MODULES USC-MALTLFK Allows electrical connection of an armored cable (BX) to the module. Includes end caps to cap the end of a system configuration. Maximum number of modules per feed must not exceed 6A. L-JOINER FOR RECESSED TRIMLESS MODULES (IN DIFFUSED OPTICS ONLY) USC-MALTL9HD Allows 90 degree connection of 2 modules. Includes light-transmittive diffused optics corner for an almost seamless connection mm 4 1/4 108 mm Page : 5/5