4 EXTRUDED RECTANGULAR SURFACE LX4S

Transcription

1 EXTRUDED RECTANGULAR SURFACE LXS SUBMITTAL: JOB: TYPE: VOLTAGE: EXAMPLE LXS - - 1SS - A - OPTIONS - EB - UNV t t t t t t t SERIES NOMINAL LAMP TYPE/ SHIELDING OPTIONS BALLAST VOLTAGE LENGTH CROSS-SECTION TYPE FEATURES XXSleek, linear design incorporates clean lines, slim styling, and a continuous line of light. XXAvailable in row-mount up to 50 or as seamless stand-alone fixtures up to 12 in length. XXAttractive source of direct lighting for use in offices, hallways, conference rooms or common areas. XXLinear extrusion contains snap-in light modules for ease of installation and maintenance. XXFixtures are designed to even increments to simplify lighting layouts. XXFrosted acrylic lens or parabolic louvers shield lamps from view. XXLamps configured to minimize dark spots. XXThis fixture is proudly made in the USA. ORDERING INFORMATION SERIES LXS Rectangular Extruded Surface NOMINAL LENGTH Stand-alone 2-12 lengths specified in 1 increments; fixture ships assembled. Example: 2 = 2. Row-mount Row mounted fixtures ship unassembled. Specify length in 1 increments from Example: 6 = 6. Contact apps@hew.com for layout assistance. LAMP TYPE/CROSS-SECTION For lamp configuration diagrams see page 2B-2F. 1NS 1-lamp, non-staggered 1SS 1 1-lamp, staggered 1 2NS 2-lamp, non-staggered 2SS 1 2-lamp, staggered 1 SHIELDING A MAPL SAPL WAPL 1NS 1SS -1/8-1/8 2NS or 2SS Frosted acrylic Specular aluminum parabolic louver Semi-specular aluminum parabolic louver White aluminum parabolic louver OPTIONS For generic EM ballast options (must specify voltage), see Information section. Ballast size restrictions apply. Consult factory. Factory-installed occupancy sensor (120V or 277V only) adds 6 to overall nominal length of fixture run: OCCWS FS-55-L6 2 End-mount sensor 2 BALLAST TYPE For dimming options see Information section. Ballast size restrictions apply. Consult factory. EB Electronic ballast VOLTAGE V V UNV V 7 7V SPECIFICATIONS Housing Extruded aluminum with diecast end caps. Shielding Extruded frosted acrylic lens or parabolic louvers with various finishes. Finish Textured matte white polyester TGIC powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical Electronic ballast standard, instant start, rated Class P. Light modules for row mounting equipped with quick-connect wiring harness standard. Mounting Surface. Labels UL/CUL listed as fluorescent luminaire suitable for dry or damp locations. 1 2 Staggered lamps not available in 2-12 units. Program start ballast recommended to avoid shortened lamp life. OCCWS FS-55-L6 option requires 120V or 277V. H.E. Williams, Inc. Carthage, Missouri Surface Page 2A

2 LXS BACK VIEW (Example shown below is of extrusion) EXTRUDED RECTANGULAR SURFACE 2 KO for power feed () 1/ Mounting holes 7/16 1-1/2 2 8 Occupancy Sensor Detail FIXTURE DETAILS OPTIONAL LOUVER SHIELDING DETAIL LOUVER CROSS-SECTIONS 1NS Choice of specular, semi-specular, and white aluminum parabolic louvers. Optional occupancy sensor is installed on the power end of the fixture. When specified, please note that the occupancy sensor adds 6 to the overall length of the fixture run. 1SS -1/8-1/8 2NS or 2SS LAMP CONFIGURATIONS - 1 and 2 NON-STAGGERED lamp lamp lamp For additional configurations, see next page. Surface Page 2B H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice.

3 EXTRUDED RECTANGULAR SURFACE LXS LAMP CONFIGURATIONS - 1 and 2 NON-STAGGERED (Continued) lamp lamp lamp For additional configurations, see next page. H.E. Williams, Inc. Carthage, Missouri Surface Page 2C

4 LXS LAMP CONFIGURATIONS - 1 STAGGERED EXTRUDED RECTANGULAR SURFACE 2 2 lamp lamp lamp For additional configurations, see next page. Surface Page 2D H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice.

5 EXTRUDED RECTANGULAR SURFACE LXS LAMP CONFIGURATIONS - 2 STAGGERED ACTUAL ROW LENGTH IS 6 MORE THAN NOMINAL (2) 2 lamps (2) lamps (2) lamps For additional configurations, see next page. H.E. Williams, Inc. Carthage, Missouri Surface Page 2E

6 LXS LAMP CONFIGURATIONS - 2 STAGGERED (Continued) ACTUAL ROW LENGTH IS 6 MORE THAN NOMINAL. 9 0 EXTRUDED RECTANGULAR SURFACE 2 (2) 2 lamps (2) lamps 1 (2) lamps For photometry, see next page. Surface Page 2F H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice.

7 EXTRUDED RECTANGULAR SURFACE LXS PHOTOMETRY FROSTED ACRYLIC LENS TEST REPORT INFORMATION XXTest Report #: XXDate: 07/12/12 XXLamp Type: F2/85 XXLamp Quantity: CANDLEPOWER DISTRIBUTION Vertical Horizontal Angle Angle Catalog #: LXS--12-A Zonal Lumens 0º 5º 90º 0º º º º º º º º º º º ZONAL CAVITY COEFFICIENTS Ceiling Wall Effective Floor Cavity Reflectance =.20 Room Cavity Ratio LUMEN SUMMARY Zone Lumens % Lamp % Fixture Total Luminaire: Total Luminaire Optical Efficiency: 69.1% IES Spacing Criteria: End = 1.2 Diagonal = 1.2 Across = 1.1 PHOTOMETRY SEMI-SPECULAR PARABOLIC LOUVER TEST REPORT INFORMATION XXTest Report #: XXDate: 07/12/12 XXLamp Type: F2/85 XXLamp Quantity: CANDLEPOWER DISTRIBUTION Vertical Horizontal Angle Angle Catalog #: LXS--12-SAPL Zonal Lumens 0º 5º 90º 0º º º º º º º º º º º ZONAL CAVITY COEFFICIENTS Ceiling Wall Effective Floor Cavity Reflectance =.20 Room Cavity Ratio LUMEN SUMMARY Zone Lumens % Lamp % Fixture Total Luminaire: Total Luminaire Optical Efficiency: 65.5% IES Spacing Criteria: End = 1. Diagonal = 1.5 Across = 1.5 For additional photometry, see next page. H.E. Williams, Inc. Carthage, Missouri Surface Page 2G

8 LXS PHOTOMETRY FROSTED ACRYLIC LENS TEST REPORT INFORMATION XXTest Report #: XXDate: 07/11/12 XXLamp Type: F2/85 XXLamp Quantity: EXTRUDED RECTANGULAR SURFACE CANDLEPOWER DISTRIBUTION Vertical Horizontal Angle Angle Catalog #: LXS--22-A Zonal Lumens 0º 5º 90º 0º º º º º º º º º º º ZONAL CAVITY COEFFICIENTS Ceiling Wall Effective Floor Cavity Reflectance =.20 Room Cavity Ratio LUMEN SUMMARY Zone Lumens % Lamp % Fixture Total Luminaire: Total Luminaire Optical Efficiency: 67.% IES Spacing Criteria: End = 1.2 Diagonal = 1.2 Across = 1.1 PHOTOMETRY SEMI-SPECULAR PARABOLIC LOUVER TEST REPORT INFORMATION XXTest Report #: XXDate: 07/12/12 XXLamp Type: F2/85 XXLamp Quantity: CANDLEPOWER DISTRIBUTION Vertical Horizontal Angle Angle Catalog #: LXS--22-SAPL Zonal Lumens 0º 5º 90º 0º º º º º º º º º º º ZONAL CAVITY COEFFICIENTS Ceiling Wall Effective Floor Cavity Reflectance =.20 Room Cavity Ratio LUMEN SUMMARY Zone Lumens % Lamp % Fixture Total Luminaire: Total Luminaire Optical Efficiency: 58.% IES Spacing Criteria: End = 1.2 Diagonal = 1.2 Across = 1. Surface Page 2H H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW7071JL Rev. 02/25/16