PSUBMITTAL REVIEW Lighting Prior Approval JOB: San Juan Regional Medical Center ER Renovation JOB NO: DATE RECEIVED: 5/20/2018 DATE RETURNED:

Transcription

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27 PSUBMITTAL REVIEW Lighting Prior Approval JOB: San Juan Regional Medical Center ER Renovation JOB NO: DATE RECEIVED: 5/20/2018 DATE RETURNED: 6/12/2017 REV - Reviewed R&R - Revise and Resubmit REJ - Rejected FAC - Furnish as Corrected (no Resubmittal required UNO) NR - Not Reviewed Corrections or comments made on the shop drawings during this review do not relieve the contractor from compliance with the requirements of the drawings and specifications. This check is only for review of general conformance with the design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for: confirming and correlating all quantities and dimensions; selecting fabrication processes and techniques of construction, coordinating their work with that of all other trades and performing his work in a satisfactory manner. Date: 6/12/2018 By:_Duane Despain_ BG Buildingworks, Inc. ITEM ACTION REMARKS R1 R2 R3 R4 R5 R6 R7 REV REV REV REV REV REV REV Approved for bid. Photometrics will be requested if successful at bid. R8 FAC PROVIDE WITH FLANGE TRIM W1 REJ NOT SIMILAR S1 S2 X1 X2 REV REV REV REV A L B U Q U E R Q U E A V O N D E N V E R F O R T C O L L I N S

28 Date: Jun 5, 2018 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE NM Phone: (505) Fax: (505) Job Name AZTEC NM Bid Date Jun 20, 2018 Submittal Date May 31, 2018 Architect: ROHDE MAY KELLER McNAMARA ARCH 400 GOLD SW, STUDIO 1100 SIMMS TOWERS ALBUQUERQUE NM 87102

29 FF00009 IW, Incorporated Page 1/1 Date: Jun 5, 2018 Page 1/1 Transmittal IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE NM Phone: (505) From: Leanne Early Project EMERGENCY DEPT RENOVATIONS (PRIORS) Quote# Location AZTEC NM Contact: ATTACHED WE ARE SENDING YOU 1 COPY OF THE FOLLOWING ITEM: Drawings Specifications Other: Prints X Information Plans X Submittals THESE ARE TRANSMITTED FOR: X Prior Approval Resubmittal for Approval Record Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment Type MFG Part R1 PRIOR APPROVAL FORM R1 HE WILLIAMS AT3-24-L40/935-D-DIM-BD-UNV R2 PRIOR APPROVAL FORM R2 HE WILLIAMS AT3-22-L40/935-D-(L33)-DIM-UNV R3 PRIOR APPROVAL FORM R3 THE L.C. DOANE COMPANY CRF 4 2L35 D S W VAR DM TP D SO5500 LUMENS R4 PRIOR APPROVAL FORM R4 HE WILLIAMS AT3-22-L20/935-D-DIM-BD-UNV R5 PRIOR APPROVAL FORM R5 CONTECH LIGHTING R4NC135KC27D R5 CONTECH LIGHTING C4322M-CLR-WPF R6 PRIOR APPROVAL FORM R6 CONTECH LIGHTING R6NC235KC27D R6 CONTECH LIGHTING C6322M-CLR-WPF R7 PRIOR APPROVAL FORM R7 HE WILLIAMS AT3-24-L30/935-D-DIM-BD-UNV R8 PRIOR APPROVAL FORM R8 HE WILLIAMS AT3-24-L40/935-D-DIM-BD-UNV W1 PRIOR APPROVAL FORM W1 CORONET INC LSI 4 35 LTG2 UNV DB W WM S1 PRIOR APPROVAL FORM S1 HE WILLIAMS 75S-4-L30/835-DIM-BD-UNV S2 PRIOR APPROVAL FORM S2 CONTECH LIGHTING LPU P LPACE P X1 PRIOR APPROVAL FORM X1 HE WILLIAMS EXIT-G-EM-WHT-D X2 PRIOR APPROVAL FORM X2 HE WILLIAMS EXIT-G-EM-WHT-D

30 1/2 PRIOR APPROVAL FORM R1 TYPE R1 AT3-24-L40/935-D-DIM-BD-UNV N/A HE WILLIAMS MARK LIGHTING WHSPR 2X4 4000LM 35K 90CRI MIN10 MVOLT SWC SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

31 2/2 PRIOR APPROVAL FORM R1 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

32 1/3 AT3-24-L40/935-D-DIM-BD-UNV R1 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER CATALOG #: TYPE: PROJECT: NOTES: AT3 LED EXAMPLE AT L70/835 - D - OPTIONS - DIM - UNV SERIES NOM. NOM. LUMEN CRI & SHIELDING OPTIONS/ DRIVER VOLTAGE W. L. PACKAGE CCT ACCESSORIES CROSS SECTION 4-7/ /16 1x4 ORDERING INFORMATION SERIES AT3 NOMINAL WIDTH Architectural LED Troffer Straight Floating Center NOMINAL LENGTH 2 2 (2 width only) 4 4 LED PACKAGE EXAMPLE: L70/835 LUMEN PACKAGE NOMINAL LUMENS MINIMUM CRI & CCT WATTAGE 1x4 L20 2, L30 3, L40 4, L50 5, L63 6, x2 827 = 82 CRI, 2700K L20 2, = 82 CRI, 3000K L30 3, = 82 CRI, 3500K L40 4, L50 5, = 82 CRI, 4000K 49 2x4 850 = 82 CRI, 5000K L30 3, L40 4, L55 5, L70 7, L85 8, L100 10, Nominal lumen output based on 3500 CCT. Actual lumens may vary +/-5%, see fixture performance data. Additional LED lumen packages available, see options. 4-3/8 SHIELDING D 23-5/8 2x2 2x4 Diffuse matte acrylic center OPTIONS For flexible whip options, see Technical Info. See page 4 for fixture details. EM/10W 10-watt emergency LED battery (120V-277V only; 2x2, 2x4 only) EM/10WLP Low-profile 10-watt emergency LED battery (120V-277V only; 1x4 only) EQCLIPS Earthquake clips (4 per fixture) (L ) Additional lower lumen packages available. Specify in increments of 100 nominal lumens. Option must be specified with next higher lumen package. Example: 5,000 nominal lumens = AT3-24-L55/835-D-(L50). SS Gasketed clear flat acrylic lens (not available with OCC option) AMW Anti-microbial white finish NEMA F NEMA Type F flange kit, factory-installed CP Chicago Plenum (CCEA) DRIVER Additional dimming drivers available, see Technical Info. DRV Driver prewired for non-dimming applications DIM 10% dimming driver prewired for 0-10V low voltage applications VOLTAGE V V UNV V V (not available with EM drivers) FEATURES XXStraight floating lens effect creates an appealing visual appearance. XXMatte white paint and diffuse lens combination provide pleasing architectural aesthetics with non-glare reflective surfaces XXSleek, extruded center compliments LX4 continuous light series. XXQuiet and smooth illumination for visual comfort XXHinged door frame with optical assembly swings down to allow easy access from room side of fixture XXOptional gasketed acrylic lens adds extra layer of protection XXRated for 25 C ambient operating temperature XXThis fixture is proudly made in the USA H.E. Williams, Inc. Carthage, Missouri Recessed Page 1 of 3

33 2/3 AT3-24-L40/935-D-DIM-BD-UNV R1 AT3 LED SPECIFICATIONS Housing Precision die-formed 22-gauge C.R.S. Door Frame Hinged, flat, extruded aluminum door frame with optical assembly. Shielding Diffuse polycarbonate lens and acrylic center standard. Finish 95% reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical High quality mid-power LED boards. L70 >60,000 hours per IES TM-21. Mounting NEMA Type G standard, NEMA Type F available. Listings cetlus conforms to UL STD 1598 and UL STD Certified to CAN/CSA STD C22.2 No Suitable for damp locations. DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at City of Chicago Environmental Air approved when specified with CP option. Warranty 5-year limited warranty, see hew.com/warranty. IMPORTANT: Electrostatic sensitive unit. Observe precautions when handling. ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE PERFORMANCE DATA LED PACKAGE DELIVERED LUMENS WATTAGE EFFICACY (LM/W) MULTIPLIER TABLE 1x4 COLOR TEMPERATURE L CCT/CRI CONVERSION FACTOR L L K/80CRI 0.97 L K/80CRI 0.99 L K/80CRI x2 4000K/80CRI 1.03 L K/80CRI 1.06 L L L x4 L L L L L L Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. Wattage shown is average for 120V through 277V input. Results based on 3500K, 80 CRI, actual lumens may vary +/-5% Use multiplier table to calculate additional options. PHOTOMETRY AT3-14-L63/830-D-DRV-120 Report #: ; 08/16/16 Total Luminaire Output: 6502 lumens; 68.3 Watts Efficacy: 95.2 lm/w 83 CRI; 3587K CCT IES Spacing Criteria: End: 1.1, Across: 1.1, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY AT3-22-L50/835-D-DRV-120 Report #: ; 07/18/16 Total Luminaire Output: 4878 lumens; 48.9 Watts Efficacy: 99.8 lm/w 82 CRI; 3557K CCT IES Spacing Criteria: End: 1.1, Across: 1.3, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION AT3-24-L70/830-D-DIM-UNV Report #: ; 02/29/16 Total Luminaire Output: 7144 lumens; 69 Watts Efficacy: lm/w 83 CRI; 3091K CCT IES Spacing Criteria: End: 1.1, Across: 1.2, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMEN SUMMARY Recessed Page 2 of 3 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW70538JJ REV.04/12/18

34 3/3 AT3-24-L40/935-D-DIM-BD-UNV R1 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE DETAILS 2x2 2x4 BACK VIEW Access Plate with (2) 7/8 KOs 1x4 BACK VIEW AT3 LED (2) 7/8 KOs Access Plate with (2) 7/8 KOs (2 x 2 ) or 48 (2 x 4 ) NEMA TYPE F INSTALLATION 1 Min. 3-3/8 Max. 4-3/8 25-5/16 Note: Maximum recommended ceiling opening is 24-3/8 x for 2 x2 and 24-3/8 x 48-3/8 for 2 x4. For continuous row mounting, add 49-5/16 for each additional fixture to obtain ceiling opening. 1-5/16 between end plates. H.E. Williams, Inc. Carthage, Missouri Recessed Page 3 of 3

35 1/2 PRIOR APPROVAL FORM R2 TYPE R2 AT3-22-L40/935-D-(L33)-DIM-UNV N/A HE WILLIAMS MARK LIGHTING-WHSPR 2X2 3300LM 35K 90CRI MIN10 MVOLT SWC SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

36 2/2 PRIOR APPROVAL FORM R2 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

37 1/3 AT3-22-L40/935-D-(L33)-DIM-UNV R2 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER CATALOG #: TYPE: PROJECT: NOTES: AT3 LED EXAMPLE AT L70/835 - D - OPTIONS - DIM - UNV SERIES NOM. NOM. LUMEN CRI & SHIELDING OPTIONS/ DRIVER VOLTAGE W. L. PACKAGE CCT ACCESSORIES CROSS SECTION 4-7/ /16 1x4 ORDERING INFORMATION SERIES AT3 NOMINAL WIDTH Architectural LED Troffer Straight Floating Center NOMINAL LENGTH 2 2 (2 width only) 4 4 LED PACKAGE EXAMPLE: L70/835 LUMEN PACKAGE NOMINAL LUMENS MINIMUM CRI & CCT WATTAGE 1x4 L20 2, L30 3, L40 4, L50 5, L63 6, x2 827 = 82 CRI, 2700K L20 2, = 82 CRI, 3000K L30 3, = 82 CRI, 3500K L40 4, L50 5, = 82 CRI, 4000K 49 2x4 850 = 82 CRI, 5000K L30 3, L40 4, L55 5, L70 7, L85 8, L100 10, Nominal lumen output based on 3500 CCT. Actual lumens may vary +/-5%, see fixture performance data. Additional LED lumen packages available, see options. 4-3/8 SHIELDING D 23-5/8 2x2 2x4 Diffuse matte acrylic center OPTIONS For flexible whip options, see Technical Info. See page 4 for fixture details. EM/10W 10-watt emergency LED battery (120V-277V only; 2x2, 2x4 only) EM/10WLP Low-profile 10-watt emergency LED battery (120V-277V only; 1x4 only) EQCLIPS Earthquake clips (4 per fixture) (L ) Additional lower lumen packages available. Specify in increments of 100 nominal lumens. 33 Option must be specified with next higher lumen package. Example: 5,000 nominal lumens = AT3-24-L55/835-D-(L50). SS Gasketed clear flat acrylic lens (not available with OCC option) AMW Anti-microbial white finish NEMA F NEMA Type F flange kit, factory-installed CP Chicago Plenum (CCEA) DRIVER Additional dimming drivers available, see Technical Info. DRV Driver prewired for non-dimming applications DIM 10% dimming driver prewired for 0-10V low voltage applications VOLTAGE V V UNV V V (not available with EM drivers) FEATURES XXStraight floating lens effect creates an appealing visual appearance. XXMatte white paint and diffuse lens combination provide pleasing architectural aesthetics with non-glare reflective surfaces XXSleek, extruded center compliments LX4 continuous light series. XXQuiet and smooth illumination for visual comfort XXHinged door frame with optical assembly swings down to allow easy access from room side of fixture XXOptional gasketed acrylic lens adds extra layer of protection XXRated for 25 C ambient operating temperature XXThis fixture is proudly made in the USA H.E. Williams, Inc. Carthage, Missouri Recessed Page 1 of 3

38 2/3 AT3-22-L40/935-D-(L33)-DIM-UNV R2 AT3 LED SPECIFICATIONS Housing Precision die-formed 22-gauge C.R.S. Door Frame Hinged, flat, extruded aluminum door frame with optical assembly. Shielding Diffuse polycarbonate lens and acrylic center standard. Finish 95% reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical High quality mid-power LED boards. L70 >60,000 hours per IES TM-21. Mounting NEMA Type G standard, NEMA Type F available. Listings cetlus conforms to UL STD 1598 and UL STD Certified to CAN/CSA STD C22.2 No Suitable for damp locations. DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at City of Chicago Environmental Air approved when specified with CP option. Warranty 5-year limited warranty, see hew.com/warranty. IMPORTANT: Electrostatic sensitive unit. Observe precautions when handling. ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE PERFORMANCE DATA LED PACKAGE DELIVERED LUMENS WATTAGE EFFICACY (LM/W) MULTIPLIER TABLE 1x4 COLOR TEMPERATURE L CCT/CRI CONVERSION FACTOR L L K/80CRI 0.97 L K/80CRI 0.99 L K/80CRI x2 4000K/80CRI 1.03 L K/80CRI 1.06 L L L x4 L L L L L L Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. Wattage shown is average for 120V through 277V input. Results based on 3500K, 80 CRI, actual lumens may vary +/-5% Use multiplier table to calculate additional options. PHOTOMETRY AT3-14-L63/830-D-DRV-120 Report #: ; 08/16/16 Total Luminaire Output: 6502 lumens; 68.3 Watts Efficacy: 95.2 lm/w 83 CRI; 3587K CCT IES Spacing Criteria: End: 1.1, Across: 1.1, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY AT3-22-L50/835-D-DRV-120 Report #: ; 07/18/16 Total Luminaire Output: 4878 lumens; 48.9 Watts Efficacy: 99.8 lm/w 82 CRI; 3557K CCT IES Spacing Criteria: End: 1.1, Across: 1.3, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION AT3-24-L70/830-D-DIM-UNV Report #: ; 02/29/16 Total Luminaire Output: 7144 lumens; 69 Watts Efficacy: lm/w 83 CRI; 3091K CCT IES Spacing Criteria: End: 1.1, Across: 1.2, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMEN SUMMARY Recessed Page 2 of 3 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW70538JJ REV.04/12/18

39 3/3 AT3-22-L40/935-D-(L33)-DIM-UNV R2 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE DETAILS 2x2 2x4 BACK VIEW Access Plate with (2) 7/8 KOs 1x4 BACK VIEW AT3 LED (2) 7/8 KOs Access Plate with (2) 7/8 KOs (2 x 2 ) or 48 (2 x 4 ) NEMA TYPE F INSTALLATION 1 Min. 3-3/8 Max. 4-3/8 25-5/16 Note: Maximum recommended ceiling opening is 24-3/8 x for 2 x2 and 24-3/8 x 48-3/8 for 2 x4. For continuous row mounting, add 49-5/16 for each additional fixture to obtain ceiling opening. 1-5/16 between end plates. H.E. Williams, Inc. Carthage, Missouri Recessed Page 3 of 3

40 1/2 PRIOR APPROVAL FORM R3 TYPE R3 CRF 4 2L35 D S W VAR DM TP D SO5500 LUMENS N/A THE L.C DOANE CO NEWSTAR - 37M24 GJ L2351 BB 27 DB SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

41 2/2 PRIOR APPROVAL FORM R3 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

42 1/2 CRF 4 2L35 D S W VAR DM TP D SO5500 LUMENS R3 CRF-LED Security LED Recessed Flange The CRF series is designed for use in all levels of security facilities and high abuse applications. Mounting Mounts recessed in metal pan or gypsum ceiling with swing brackets that extend and clamp with a single screw action. Housing 18 gauge die-formed cold rolled steel with seams welded and ground smooth. Door One-piece die-formed cold rolled steel overlapping door with 14 gauge lens retainers. Freedom Hinge TM design permits removal and hinging from either side. Stainless steel available. Internal Lens Optic Plus lens (standard) completely hides diode image while providing minimum 95% light transmission. Job Name Fixture Type Catalog No. Approval PRODUCT SPECIFICATION Date Finish Polyester powder-coated after phosphate pretreatment for superior adhesion and corrosion resistance. Brushed stainless steel door available in. (2 ft.) in. (4 ft.) Hardware Recessed, stainless steel, tamper-proof fasteners. ø in. knockout Driver 0-10Vdc dimming, Range 1%-100% -40 C Min. starting temperature, >0.9 PF, <20% THD Wiring Driver provided with pre-wired 3-wire self-aligning input power quick disconnect and 2-wire quick disconnect to LED module in. 4.5 in in. 36 in in. with 2 ft. lamps in. with 4 ft. lamps 23 in. Certifications UL Listed damp or wet location. Wet location option is IP65 rated. CRF / one two three four five six seven eight nine one 2 4 two 2L 3L 4L three four N D X U five C S six R W Luminaire Size 2 ft fixture 4 ft fixture LED Rows Two Three Four Color Temperature 3000K 3500K 4000K 5000K Door Gauge 18 gauge, minimum security 16 gauge, medium security 14 gauge, maximum security 12 gauge, super max, CRS only Door Material Cold rolled steel Stainless steel Finish Brushed stainless steel White seven VAR eight DM nine ten Voltage 120 V, 60 Hz 277 V, 60 Hz Variable, V, 50/60Hz Driver 0-10Vdc Dimming, standard External Lens.187 in. clear polycarbonate.250 in. clear polycarbonate.375 in. clear polycarbonate.500 in. clear polycarbonate.187 in. clear tempered glass.250 in. clear tempered glass.375 in. clear tempered glass ten Internal Lens Optic Plus LED diffusing acrylic lens, standard.125 in. K12 prismatic acrylic.125 in K12 prismatic polycarbonate.156 in. K12 prismatic polycarbonate.187 in. K12 prismatic polycarbonate.156 in. C73 prismatic tempered glass - - eleven eleven AP TP PH twelve D W twelve thirteen Door Fasteners Stainless steel allen head with pin Stainless steel torx head with pin Phillips, non-security UL Listing Damp Location Wet Location thirteen Options SO 2C CU EM FH NL-LED IMS PF Specified output* Two-circuit wired Canadian UL Listing Emergency battery backup Fuse and holder Night light, LED Integral Occ Sensor Plaster frame SO5500L * Indicated as SO(xx/xxxx). Specified output, Input watts / delivered lumens to be determined based on specified requirements. Consult factory for 14 and 16 gauge CRS and SS housings. Modifications are available to meet custom requirements. The L.C. Doane Company PO Box 700, Ivoryton, CT tel: fax: Rev

43 2/2 CRF 4 2L35 D S W VAR DM TP D SO5500 LUMENS R3 CRF-LED PRODUCT SPECIFICATION Photometric Data for a 2x2 fixture with four rows (Full Output) Lumens Input Watts 109 watts Lumens / Watt 119 CCT 4000K CRI >80 LED Life >100,000 Photometric Data for a 2x4 fixture with three rows (Full Output) Lumens Input Watts watts Lumens / Watt 127 CCT 4000K CRI >80 LED Life >100,000 Coefficients of Utilization - Zonal Cavity Method (CRF-LED 2x4) CRF-LED - Polar Candela Distribution (CRF-LED 2x4) The L.C. Doane Company PO Box 700, Ivoryton, CT tel: fax: Rev

44 1/2 PRIOR APPROVAL FORM R4 TYPE R4 AT3-22-L20/935-D-DIM-BD-UNV N/A HE WILLIAMS MARK LIGHTING - WHSPR 2X2 2000LM 35K 90CRI MIN10 MVOLT SWC SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

45 2/2 PRIOR APPROVAL FORM R4 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

46 1/3 AT3-22-L20/935-D-DIM-BD-UNV R4 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER CATALOG #: TYPE: PROJECT: NOTES: AT3 LED EXAMPLE AT L70/835 - D - OPTIONS - DIM - UNV SERIES NOM. NOM. LUMEN CRI & SHIELDING OPTIONS/ DRIVER VOLTAGE W. L. PACKAGE CCT ACCESSORIES CROSS SECTION 4-7/ /16 1x4 ORDERING INFORMATION SERIES AT3 NOMINAL WIDTH Architectural LED Troffer Straight Floating Center NOMINAL LENGTH 2 2 (2 width only) 4 4 LED PACKAGE EXAMPLE: L70/835 LUMEN PACKAGE NOMINAL LUMENS MINIMUM CRI & CCT WATTAGE 1x4 L20 2, L30 3, L40 4, L50 5, L63 6, x2 827 = 82 CRI, 2700K L20 2, = 82 CRI, 3000K L30 3, = 82 CRI, 3500K L40 4, L50 5, = 82 CRI, 4000K 49 2x4 850 = 82 CRI, 5000K L30 3, L40 4, L55 5, L70 7, L85 8, L100 10, Nominal lumen output based on 3500 CCT. Actual lumens may vary +/-5%, see fixture performance data. Additional LED lumen packages available, see options. 4-3/8 SHIELDING D 23-5/8 2x2 2x4 Diffuse matte acrylic center OPTIONS For flexible whip options, see Technical Info. See page 4 for fixture details. EM/10W 10-watt emergency LED battery (120V-277V only; 2x2, 2x4 only) EM/10WLP Low-profile 10-watt emergency LED battery (120V-277V only; 1x4 only) EQCLIPS Earthquake clips (4 per fixture) (L ) Additional lower lumen packages available. Specify in increments of 100 nominal lumens. Option must be specified with next higher lumen package. Example: 5,000 nominal lumens = AT3-24-L55/835-D-(L50). SS Gasketed clear flat acrylic lens (not available with OCC option) AMW Anti-microbial white finish NEMA F NEMA Type F flange kit, factory-installed CP Chicago Plenum (CCEA) DRIVER Additional dimming drivers available, see Technical Info. DRV Driver prewired for non-dimming applications DIM 10% dimming driver prewired for 0-10V low voltage applications VOLTAGE V V UNV V V (not available with EM drivers) FEATURES XXStraight floating lens effect creates an appealing visual appearance. XXMatte white paint and diffuse lens combination provide pleasing architectural aesthetics with non-glare reflective surfaces XXSleek, extruded center compliments LX4 continuous light series. XXQuiet and smooth illumination for visual comfort XXHinged door frame with optical assembly swings down to allow easy access from room side of fixture XXOptional gasketed acrylic lens adds extra layer of protection XXRated for 25 C ambient operating temperature XXThis fixture is proudly made in the USA H.E. Williams, Inc. Carthage, Missouri Recessed Page 1 of 3

47 2/3 AT3-22-L20/935-D-DIM-BD-UNV R4 AT3 LED SPECIFICATIONS Housing Precision die-formed 22-gauge C.R.S. Door Frame Hinged, flat, extruded aluminum door frame with optical assembly. Shielding Diffuse polycarbonate lens and acrylic center standard. Finish 95% reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical High quality mid-power LED boards. L70 >60,000 hours per IES TM-21. Mounting NEMA Type G standard, NEMA Type F available. Listings cetlus conforms to UL STD 1598 and UL STD Certified to CAN/CSA STD C22.2 No Suitable for damp locations. DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at City of Chicago Environmental Air approved when specified with CP option. Warranty 5-year limited warranty, see hew.com/warranty. IMPORTANT: Electrostatic sensitive unit. Observe precautions when handling. ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE PERFORMANCE DATA LED PACKAGE DELIVERED LUMENS WATTAGE EFFICACY (LM/W) MULTIPLIER TABLE 1x4 COLOR TEMPERATURE L CCT/CRI CONVERSION FACTOR L L K/80CRI 0.97 L K/80CRI 0.99 L K/80CRI x2 4000K/80CRI 1.03 L K/80CRI 1.06 L L L x4 L L L L L L Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. Wattage shown is average for 120V through 277V input. Results based on 3500K, 80 CRI, actual lumens may vary +/-5% Use multiplier table to calculate additional options. PHOTOMETRY AT3-14-L63/830-D-DRV-120 Report #: ; 08/16/16 Total Luminaire Output: 6502 lumens; 68.3 Watts Efficacy: 95.2 lm/w 83 CRI; 3587K CCT IES Spacing Criteria: End: 1.1, Across: 1.1, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY AT3-22-L50/835-D-DRV-120 Report #: ; 07/18/16 Total Luminaire Output: 4878 lumens; 48.9 Watts Efficacy: 99.8 lm/w 82 CRI; 3557K CCT IES Spacing Criteria: End: 1.1, Across: 1.3, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION AT3-24-L70/830-D-DIM-UNV Report #: ; 02/29/16 Total Luminaire Output: 7144 lumens; 69 Watts Efficacy: lm/w 83 CRI; 3091K CCT IES Spacing Criteria: End: 1.1, Across: 1.2, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMEN SUMMARY Recessed Page 2 of 3 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW70538JJ REV.04/12/18

48 3/3 AT3-22-L20/935-D-DIM-BD-UNV R4 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE DETAILS 2x2 2x4 BACK VIEW Access Plate with (2) 7/8 KOs 1x4 BACK VIEW AT3 LED (2) 7/8 KOs Access Plate with (2) 7/8 KOs (2 x 2 ) or 48 (2 x 4 ) NEMA TYPE F INSTALLATION 1 Min. 3-3/8 Max. 4-3/8 25-5/16 Note: Maximum recommended ceiling opening is 24-3/8 x for 2 x2 and 24-3/8 x 48-3/8 for 2 x4. For continuous row mounting, add 49-5/16 for each additional fixture to obtain ceiling opening. 1-5/16 between end plates. H.E. Williams, Inc. Carthage, Missouri Recessed Page 3 of 3

49 1/2 PRIOR APPROVAL FORM R5 TYPE R5 R4NC135KC27D / C4322M-CLR-WPF N/A CONTECH JUNO - IC4AL 10LM 35K 90CRI FL MVOLT ZT 42L HZWH SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

50 2/2 PRIOR APPROVAL FORM R5 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

51 1/5 R4NC135KC27D R5

52 2/5 R4NC135KC27D R5 R4NC

53 3/5 R4NC135KC27D R5

54 4/5 R4NC135KC27D R5

55 5/5 R4NC135KC27D R5

56 1/1 C4322M-CLR-WPF R5

57 1/2 PRIOR APPROVAL FORM R6 TYPE R6 R6NC235KC27D / C6322M-CLR-WPF N/A CONTECH JUNO - JCLR6S 15LM 35K 90CRI MVOLT ZT WWH SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

58 2/2 PRIOR APPROVAL FORM R6 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

59 1/5 R6NC235KC27D R6 R6NC 6" LED Recessed Downlight: Universal New Construction Housing Specifications/Features Housing/Mounting Specification grade 6" housing, 6-1/2" aperture. 6-5/8" Ceiling opening. 16 Gauge galvanized steel housing with die-cast aluminum heat sink. Requires minimum 3" clearance around fixture from insulation material. Thermal protection provided in case of improper insulation use. Dual nailer hanger bars are adjustable for 16" and 24" center joists (14-1/4" to 24-1/2"). Nailer bars enable easy installation; may be extended to rest on T-bar ceilings. Optional clip-on T-bar hangers also 12-7/8" avaliable. Quick-connect LED light engine enables easy installation and removal. LED Drivers are fully accessible from below the ceiling, and can be easily removed. Electrical UL8750 and Class 2 Compliant, RoHS Compliant. Output over-voltage, over-current and short circuit protection. Approved for through-circuit wiring. Max: (8) 12AWG (4in/4out). Wiring rated to 90 C. 9-3/8" Pre-wired junction box with convenient screwdriver pry-outs. (3) 1/2" and (1) 1/2" x 3/4" concentric knockout. Optional emergency battery pack with remote test switch is available. Lamp Light engine consists of a single, high output multi-chip LED array enabling precise optical control. Excellent fixture-to-fixture color consistency with a 3-step MacAdam Ellipse tolerance. System designed and rated for 50,000 hours at 70% lumen maintenance. Dimming All R6 downlights are available for non-dimming and dimming applications. For a list of compatible dimmers, refer to LED Dimming Catalog. 6-3/4" Trims Specification Grade trims are available in several different styles and finishes for your space. Featuring a high quality Alzak finish; optically designed for reduced glare while maintaining maximum lumen output. 1/2" See 6" LED Recessed Trims spec sheet for information and details. Warranty 6-1/2" This complete fixture is covered by ConTech s full five (5) year replacement guarantee after date of purchase. Labels/Usage ccsaus Certified to UL Standards. Suitable for damp locations. ccsaus Certified to UL924 Standard for Emergency Lighting. Assembled in the USA. Energy Star certified: Series 1 Series 2 Series 3 Series 4 Series 5 Series 6 - Series 1 through 6. Input Wattage (W) Certified trims only: C6322-PL, C6322-WHT and Input Current (A) 120/277/347.08/.04/.03.12/.06/.04.17/.08/.06.23/.11/.08.31/.14/.11.36/.16/.12 C6322-CLR (all beam distributions). The C and SL Input Voltage options are not Energy Star certified. Standard Driver (120V & 277V) 120V AC, 50/60Hz - Lutron and eldoled dimming options are not Energy Star certified V option is not Energy Star Certified. Standard Driver (347V) 277V AC, 50/60Hz 347V AC, 50/60Hz Lutron HiLume Driver 120V AC, 50/60Hz Lutron Eco-System Driver eldoled ECOdrive / SOLOdrive Color Temp 120V AC, 50/60Hz 277V AC, 50/60Hz 120V AC, 50/60Hz 277V AC, 50/60Hz 2700K/3000K/3500K/4000K CRI Standard/High 83 (80min) / 90+ Driver Power Factor > 0.90 THD < 20% Please Recycle All specifications subject to change without notice.

60 2/5 R6NC235KC27D R6 Catalog No. R6NC 6" LED Recessed Downlight: Universal New Construction Housing Type Project Ordering Information Example Order: R6NC130K12D ER C6322N-CLR Housing LED Series Color Temp Electrical Dimming Options R6NC R6NC 1-10W, 1000lm 2-14W, 1400lm 3-20W, 2000lm 4-28W, 2600lm 5-37W, 3200lm 6-43W, 3600lm 27K K 30K K 35K K 40K K 27KC K, 90+ CRI 30KC K, 90+ CRI 35KC K, 90+ CRI 40KC K, 90+ CRI V V V D 2 - Triac, ELV, 0-10V Dimming D V, 0-10V Dimming Only D3 3 - Lutron Hi-lume 1% 2-Wire LED Driver (120V Forward Phase Only) D4 - Lutron Hi-lume 1% EcoSystem LED Driver with Soft-on, Fade-to-Black D6 4 - eldoled ECOdrive, 0-10V, 1% Dimming D7 4 - eldoled ECOdrive, DALI, 1% Dimming D8 4 - eldoled SOLOdrive, 0-10V, 0.1% Dimming D9 4 - eldoled SOLOdrive, DALI, 0.1% Dimming DMX 4,5 - eldoled POWERdrive, DMX 0.0% Dimming ER 6 - Factory Installed 7W/200mA Emergency Battery Backup [Remote Test Switch] Accessories (Standard Hanger Bars Supplied with Housing) RL-KIT - Commercial Mounting Brackets HB-24-27" Flat Hanger Bars for RL-KIT HBC-24-25" C-Channel Hanger Bars for RL-KIT in Grid Ceiling Construction HB-30 - T-Bar Hanger Set RSA6L-5-WHT - 6" Slope Ceiling Adapter, 5 Pitch RSA6L-10-WHT - 6" Slope Ceiling Adapter, 10 Pitch RSA6L-15-WHT - 6" Slope Ceiling Adapter, 15 Pitch RSA6L-20-WHT - 6" Slope Ceiling Adapter, 20 Pitch RSA6L-25-WHT - 6" Slope Ceiling Adapter, 25 Pitch RSA6L-30-WHT - 6" Slope Ceiling Adapter, 30 Pitch Trims See 6" LED Recessed Trims sheet for trim information and details. 1. Only available for 347V Dimming option (D2). Cannot be used with Emergency Battery Backup option. 2. Triac and ELV dimming for 120V only 3. Lutron Hi-Lume dimming only available in 120V 4. eldoled Drivers are programmed for linear curve dimming as standard. For logarithmic curve dimming, please consult factory. 5. Verify DMX Driver and Control System compatibility with factory prior to ordering. 6. Emergency battery backup option: 725 lumen nominal average for any Series 1 through Please Recycle All specifications subject to change without notice.

61 3/5 R6NC235KC27D R6 Catalog No. R6 Series 6" LED Recessed Downlight Trims Type Project 5-3/4" I.D. Height: 4-1/4" 7" O.D. Specification Grade Specular Reflector Specification grade specular reflector: narrow beam clear, medium beam clear, wide beam clear, platinum, platinum wheat, or white. OD: 7"; ID: 5-3/4" Add -C (clear lens) or -SL (sandblast lens) after finish code for wet location approved trim. C6322N-CLR* - 34 Clear Reflector C6322M-CLR* - 65 Clear Reflector C6322W-CLR* - 75 Clear Reflector C6322-PL* - Platinum Reflector C6322-PLWHE* - Platinum Wheat Reflector C6322-WHT - White Reflector *Available with White Painted Flange, add WPF to part number. 5-5/8" I.D. Height: 4-1/4" 7" O.D. Lensed Wall Wash Trim Lensed Wall Wash Trim; Clear, Platinum or White Reflector. OD: 7"; ID: 5-5/8" C6323-CLR* - Clear Reflector C6323-PL* - Platinum Reflector C6323-WHT - White Reflector *Available with White Painted Flange, add WPF to part number. 5-3/4" I.D. Height: 4-1/4" 5-3/4" I.D. Height: 4-1/4" 5-3/4" I.D. Height: 4-1/4" 5-3/4" I.D. Height: 4-1/4" 7" O.D. 7" O.D. 7" O.D. 7" O.D. Two Piece Reflector Trim Two piece reflector: clear or white upper reflector, clear or platinum lower cone; Includes (1) LF38-CL glass lens. OD: 7"; ID: 5-3/4" Approved for dry/damp locations. Approved for wet locations when glass lens is installed. C6321-CLR-(CLR,PL) C6321-WHT-(CLR,PL) - Clear Reflector/ Clear or Platinum Lower Cone - White Reflector/ Clear or Platinum Lower Cone Two Piece Reflector/Baffle Trim Two piece reflector/baffle: clear or white upper reflector, black or white lower baffle; Includes (1) LF38-CL glass lens. OD: 7"; ID: 5-3/4" Approved for dry/damp locations. Approved for wet locations when glass lens is installed. C6321-CLR-(B,P) - Clear Reflector/ Black or White Lower Baffle C6321-WHT-(B,P) - White Reflector/ Black or White Lower Baffle Two Piece Reflector Trim with Lens Two piece reflector: Clear or white upper reflector, clear or platinum lower cone; regressed prismatic convex lens, Wet Location Listed. OD: 7"; ID: 5-3/4" C6327-CLR-(CLR,PL) - Clear Reflector/ Clear or Platinum Lower Cone C6327-WHT-(CLR,PL) - White Reflector/ Clear or Platinum Lower Cone Two Piece Reflector/Baffle Trim with Lens Two piece aluminum reflector and baffle with lens: Clear or white upper reflector, black or white lower baffle with regressed prismatic convex glass lens; 1-1/2" Regress. Wet Location Listed. OD: 7"; ID: 5-3/4" C6327-CLR-(B,P) - Clear Reflector/ Black or White Lower Baffle C6327-WHT-(B,P) - White Reflector/ Black or White Lower Baffle 5-3/4" I.D. 5-3/4" I.D. 5-3/4" I.D. 5-3/4" I.D. 7-7/8" O.D. 7-7/8" O.D. 7-7/8" O.D. 7-7/8" O.D. Floating Glass Trim Floating glass disc; clear or white reflector. 1-1/4" Drop from ceiling. Glass OD: 8-3/4". CTR6325L2-(CLR,WHT)-P Floating Glass Ring Floating glass ring; clear or white reflector. 1-1/4" Drop from ceiling; 3-1/2" center hole. Glass OD: 8-3/4". CTR6326L2-(CLR,WHT)-P Floating Single Acrylic Ring Single sandblasted floating colored acrylic ring supported by three (3) posts. Clear or white reflector. 1-1/2" Drop from ceiling. Acrylic Ring OD: 8-5/8"; ID: 6-1/8". CTR6324L2-(CLR,WHT)-P 1AR6(B,F,G,R,Y) Floating Double Acrylic Ring Stacked floating colored, sandblasted acrylic rings supported by three (3) posts. Clear or white reflector. 2-3/4" Drop from ceiling. Acrylic Ring OD: 8-5/8"; ID: 6-1/8". CTR6324L2-(CLR,WHT)-P 2AR6(B,F,G,R,Y) Acrylic Ring Finishes: -B (blue), -F (frosted), -G (green), -R (red), -Y (yellow) Please Recycle All specifications subject to change without notice.

62 4/5 R6NC235KC27D R6 R6NC 6" LED Recessed Downlight: Universal New Construction Housing Photometrics Multiplication Factors CCT STD CRI HIGH CRI SERIES 1 SERIES 2 SERIES 3 SERIES 4 SERIES 5 WHT/PL REFLECTORS 2700K K N/A K K R6NC630K12D/C6322N-CLR Designed for 50,000 Hour Lamp Life*; LM-63 Test No Light Output (Fixture Delivered Lumens): 3544 Total Watts@120V: 43.0 Lumens Per Watt: 82.4 Color Rendering Index (CRI)¹: 83 Color Temperature (CCT)²: 3034K Spectral Power Distribution Chart³ Typical Wavelength (nm) Candela Curve Candlepower Summary FROM 0 CANDELA LUMENS Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.) 6' ' ' ' ' ' Beam Distribution: 34 Spacing Criteria: 0.56 R6NC630K12D/C6322M-CLR Designed for 50,000 Hour Lamp Life*; LM-63 Test No Light Output (Fixture Delivered Lumens): 3539 Total Watts@120V: 43.3 Lumens Per Watt: 81.7 Color Rendering Index (CRI)¹: 82 Color Temperature (CCT)²: 3088K Spectral Power Distribution Chart³ Typical Wavelength (nm) Candela Curve Candlepower Summary FROM 0 CANDELA LUMENS Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.) 6' ' ' ' ' ' Beam Distribution: 66 Spacing Criteria: 0.95 R6NC630K12D/C6322W-CLR Designed for 50,000 Hour Lamp Life*; LM-63 Test No Light Output (Fixture Delivered Lumens): 3521 Total Watts@120V: 44.0 Lumens Per Watt: 80.0 Color Rendering Index (CRI)¹: 82 Color Temperature (CCT)²: 3075K Spectral Power Distribution Chart³ Typical Wavelength (nm) Candela Curve Candlepower Summary FROM 0 CANDELA LUMENS Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.) 6' ' ' ' ' ' Beam Distribution: 75 Spacing Criteria: 1.11

63 5/5 R6NC235KC27D R6 R6NC 6" LED Recessed Downlight: Universal New Construction Housing Photometrics Multiplication Factors CCT STD CRI HIGH CRI SERIES 1 SERIES 2 SERIES 3 SERIES 4 SERIES 5 WHT/PL REFLECTORS 2700K K N/A K K R6NC630K12D/C6322-PL Designed for 50,000 Hour Lamp Life*; LM-63 Test No Light Output (Fixture Delivered Lumens): 3304 Total Watts@120V: 43.2 Lumens Per Watt: 76.5 Color Rendering Index (CRI)¹: 82 Color Temperature (CCT)²: 3030K Spectral Power Distribution Chart³ Typical Wavelength (nm) Candela Curve Candlepower Summary FROM 0 CANDELA LUMENS Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.) 6' ' ' ' ' ' Beam Distribution: 69 Spacing Criteria: 0.97

64 1/1 C6322M-CLR-WPF R6 Catalog No. R6 Series 6" LED Recessed Downlight Trims Type Project 5-3/4" I.D. Height: 4-1/4" 7" O.D. Specification Grade Specular Reflector Specification grade specular reflector: narrow beam clear, medium beam clear, wide beam clear, platinum, platinum wheat, or white. OD: 7"; ID: 5-3/4" Add -C (clear lens) or -SL (sandblast lens) after finish code for wet location approved trim. C6322N-CLR* - 34 Clear Reflector C6322M-CLR* - 65 Clear Reflector C6322W-CLR* - 75 Clear Reflector C6322-PL* - Platinum Reflector C6322-PLWHE* - Platinum Wheat Reflector C6322-WHT - White Reflector *Available with White Painted Flange, add WPF to part number. 5-5/8" I.D. Height: 4-1/4" 7" O.D. Lensed Wall Wash Trim Lensed Wall Wash Trim; Clear, Platinum or White Reflector. OD: 7"; ID: 5-5/8" C6323-CLR* - Clear Reflector C6323-PL* - Platinum Reflector C6323-WHT - White Reflector *Available with White Painted Flange, add WPF to part number. 5-3/4" I.D. Height: 4-1/4" 5-3/4" I.D. Height: 4-1/4" 5-3/4" I.D. Height: 4-1/4" 5-3/4" I.D. Height: 4-1/4" 7" O.D. 7" O.D. 7" O.D. 7" O.D. Two Piece Reflector Trim Two piece reflector: clear or white upper reflector, clear or platinum lower cone; Includes (1) LF38-CL glass lens. OD: 7"; ID: 5-3/4" Approved for dry/damp locations. Approved for wet locations when glass lens is installed. C6321-CLR-(CLR,PL) C6321-WHT-(CLR,PL) - Clear Reflector/ Clear or Platinum Lower Cone - White Reflector/ Clear or Platinum Lower Cone Two Piece Reflector/Baffle Trim Two piece reflector/baffle: clear or white upper reflector, black or white lower baffle; Includes (1) LF38-CL glass lens. OD: 7"; ID: 5-3/4" Approved for dry/damp locations. Approved for wet locations when glass lens is installed. C6321-CLR-(B,P) - Clear Reflector/ Black or White Lower Baffle C6321-WHT-(B,P) - White Reflector/ Black or White Lower Baffle Two Piece Reflector Trim with Lens Two piece reflector: Clear or white upper reflector, clear or platinum lower cone; regressed prismatic convex lens, Wet Location Listed. OD: 7"; ID: 5-3/4" C6327-CLR-(CLR,PL) - Clear Reflector/ Clear or Platinum Lower Cone C6327-WHT-(CLR,PL) - White Reflector/ Clear or Platinum Lower Cone Two Piece Reflector/Baffle Trim with Lens Two piece aluminum reflector and baffle with lens: Clear or white upper reflector, black or white lower baffle with regressed prismatic convex glass lens; 1-1/2" Regress. Wet Location Listed. OD: 7"; ID: 5-3/4" C6327-CLR-(B,P) - Clear Reflector/ Black or White Lower Baffle C6327-WHT-(B,P) - White Reflector/ Black or White Lower Baffle 5-3/4" I.D. 5-3/4" I.D. 5-3/4" I.D. 5-3/4" I.D. 7-7/8" O.D. 7-7/8" O.D. 7-7/8" O.D. 7-7/8" O.D. Floating Glass Trim Floating glass disc; clear or white reflector. 1-1/4" Drop from ceiling. Glass OD: 8-3/4". CTR6325L2-(CLR,WHT)-P Floating Glass Ring Floating glass ring; clear or white reflector. 1-1/4" Drop from ceiling; 3-1/2" center hole. Glass OD: 8-3/4". CTR6326L2-(CLR,WHT)-P Floating Single Acrylic Ring Single sandblasted floating colored acrylic ring supported by three (3) posts. Clear or white reflector. 1-1/2" Drop from ceiling. Acrylic Ring OD: 8-5/8"; ID: 6-1/8". CTR6324L2-(CLR,WHT)-P 1AR6(B,F,G,R,Y) Floating Double Acrylic Ring Stacked floating colored, sandblasted acrylic rings supported by three (3) posts. Clear or white reflector. 2-3/4" Drop from ceiling. Acrylic Ring OD: 8-5/8"; ID: 6-1/8". CTR6324L2-(CLR,WHT)-P 2AR6(B,F,G,R,Y) Acrylic Ring Finishes: -B (blue), -F (frosted), -G (green), -R (red), -Y (yellow) Please Recycle All specifications subject to change without notice.

65 1/2 PRIOR APPROVAL FORM R7 TYPE R7 AT3-24-L30/935-D-DIM-BD-UNV N/A HE WILLIAMS MARK LIGHTING_ WHSPR 2X4 3000LM 35K 90CRI MIN10 MVOLT SWC SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

66 2/2 PRIOR APPROVAL FORM R7 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

67 1/3 AT3-24-L30/935-D-DIM-BD-UNV R7 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER CATALOG #: TYPE: PROJECT: NOTES: AT3 LED EXAMPLE AT L70/835 - D - OPTIONS - DIM - UNV SERIES NOM. NOM. LUMEN CRI & SHIELDING OPTIONS/ DRIVER VOLTAGE W. L. PACKAGE CCT ACCESSORIES CROSS SECTION 4-7/ /16 1x4 ORDERING INFORMATION SERIES AT3 NOMINAL WIDTH Architectural LED Troffer Straight Floating Center NOMINAL LENGTH 2 2 (2 width only) 4 4 LED PACKAGE EXAMPLE: L70/835 LUMEN PACKAGE NOMINAL LUMENS MINIMUM CRI & CCT WATTAGE 1x4 L20 2, L30 3, L40 4, L50 5, L63 6, x2 827 = 82 CRI, 2700K L20 2, = 82 CRI, 3000K L30 3, = 82 CRI, 3500K L40 4, L50 5, = 82 CRI, 4000K 49 2x4 850 = 82 CRI, 5000K L30 3, L40 4, L55 5, L70 7, L85 8, L100 10, Nominal lumen output based on 3500 CCT. Actual lumens may vary +/-5%, see fixture performance data. Additional LED lumen packages available, see options. 4-3/8 SHIELDING D 23-5/8 2x2 2x4 Diffuse matte acrylic center OPTIONS For flexible whip options, see Technical Info. See page 4 for fixture details. EM/10W 10-watt emergency LED battery (120V-277V only; 2x2, 2x4 only) EM/10WLP Low-profile 10-watt emergency LED battery (120V-277V only; 1x4 only) EQCLIPS Earthquake clips (4 per fixture) (L ) Additional lower lumen packages available. Specify in increments of 100 nominal lumens. Option must be specified with next higher lumen package. Example: 5,000 nominal lumens = AT3-24-L55/835-D-(L50). SS Gasketed clear flat acrylic lens (not available with OCC option) AMW Anti-microbial white finish NEMA F NEMA Type F flange kit, factory-installed CP Chicago Plenum (CCEA) DRIVER Additional dimming drivers available, see Technical Info. DRV Driver prewired for non-dimming applications DIM 10% dimming driver prewired for 0-10V low voltage applications VOLTAGE V V UNV V V (not available with EM drivers) FEATURES XXStraight floating lens effect creates an appealing visual appearance. XXMatte white paint and diffuse lens combination provide pleasing architectural aesthetics with non-glare reflective surfaces XXSleek, extruded center compliments LX4 continuous light series. XXQuiet and smooth illumination for visual comfort XXHinged door frame with optical assembly swings down to allow easy access from room side of fixture XXOptional gasketed acrylic lens adds extra layer of protection XXRated for 25 C ambient operating temperature XXThis fixture is proudly made in the USA H.E. Williams, Inc. Carthage, Missouri Recessed Page 1 of 3

68 2/3 AT3-24-L30/935-D-DIM-BD-UNV R7 AT3 LED SPECIFICATIONS Housing Precision die-formed 22-gauge C.R.S. Door Frame Hinged, flat, extruded aluminum door frame with optical assembly. Shielding Diffuse polycarbonate lens and acrylic center standard. Finish 95% reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical High quality mid-power LED boards. L70 >60,000 hours per IES TM-21. Mounting NEMA Type G standard, NEMA Type F available. Listings cetlus conforms to UL STD 1598 and UL STD Certified to CAN/CSA STD C22.2 No Suitable for damp locations. DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at City of Chicago Environmental Air approved when specified with CP option. Warranty 5-year limited warranty, see hew.com/warranty. IMPORTANT: Electrostatic sensitive unit. Observe precautions when handling. ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE PERFORMANCE DATA LED PACKAGE DELIVERED LUMENS WATTAGE EFFICACY (LM/W) MULTIPLIER TABLE 1x4 COLOR TEMPERATURE L CCT/CRI CONVERSION FACTOR L L K/80CRI 0.97 L K/80CRI 0.99 L K/80CRI x2 4000K/80CRI 1.03 L K/80CRI 1.06 L L L x4 L L L L L L Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. Wattage shown is average for 120V through 277V input. Results based on 3500K, 80 CRI, actual lumens may vary +/-5% Use multiplier table to calculate additional options. PHOTOMETRY AT3-14-L63/830-D-DRV-120 Report #: ; 08/16/16 Total Luminaire Output: 6502 lumens; 68.3 Watts Efficacy: 95.2 lm/w 83 CRI; 3587K CCT IES Spacing Criteria: End: 1.1, Across: 1.1, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY AT3-22-L50/835-D-DRV-120 Report #: ; 07/18/16 Total Luminaire Output: 4878 lumens; 48.9 Watts Efficacy: 99.8 lm/w 82 CRI; 3557K CCT IES Spacing Criteria: End: 1.1, Across: 1.3, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION AT3-24-L70/830-D-DIM-UNV Report #: ; 02/29/16 Total Luminaire Output: 7144 lumens; 69 Watts Efficacy: lm/w 83 CRI; 3091K CCT IES Spacing Criteria: End: 1.1, Across: 1.2, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMEN SUMMARY Recessed Page 2 of 3 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW70538JJ REV.04/12/18

69 3/3 AT3-24-L30/935-D-DIM-BD-UNV R7 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE DETAILS 2x2 2x4 BACK VIEW Access Plate with (2) 7/8 KOs 1x4 BACK VIEW AT3 LED (2) 7/8 KOs Access Plate with (2) 7/8 KOs (2 x 2 ) or 48 (2 x 4 ) NEMA TYPE F INSTALLATION 1 Min. 3-3/8 Max. 4-3/8 25-5/16 Note: Maximum recommended ceiling opening is 24-3/8 x for 2 x2 and 24-3/8 x 48-3/8 for 2 x4. For continuous row mounting, add 49-5/16 for each additional fixture to obtain ceiling opening. 1-5/16 between end plates. H.E. Williams, Inc. Carthage, Missouri Recessed Page 3 of 3

70 1/2 PRIOR APPROVAL FORM R8 TYPE R8 AT3-24-L40/935-D-DIM-BD-UNV N/A HE WILLIAMS MARK LIGHTING_ WHSPR 2X4 4000LM 35K 90CRI MIN10 MVOLT SWC SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

71 2/2 PRIOR APPROVAL FORM R8 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

72 1/3 AT3-24-L40/935-D-DIM-BD-UNV R8 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER CATALOG #: TYPE: PROJECT: NOTES: AT3 LED EXAMPLE AT L70/835 - D - OPTIONS - DIM - UNV SERIES NOM. NOM. LUMEN CRI & SHIELDING OPTIONS/ DRIVER VOLTAGE W. L. PACKAGE CCT ACCESSORIES CROSS SECTION 4-7/ /16 1x4 ORDERING INFORMATION SERIES AT3 NOMINAL WIDTH Architectural LED Troffer Straight Floating Center NOMINAL LENGTH 2 2 (2 width only) 4 4 LED PACKAGE EXAMPLE: L70/835 LUMEN PACKAGE NOMINAL LUMENS MINIMUM CRI & CCT WATTAGE 1x4 L20 2, L30 3, L40 4, L50 5, L63 6, x2 827 = 82 CRI, 2700K L20 2, = 82 CRI, 3000K L30 3, = 82 CRI, 3500K L40 4, L50 5, = 82 CRI, 4000K 49 2x4 850 = 82 CRI, 5000K L30 3, L40 4, L55 5, L70 7, L85 8, L100 10, Nominal lumen output based on 3500 CCT. Actual lumens may vary +/-5%, see fixture performance data. Additional LED lumen packages available, see options. 4-3/8 SHIELDING D 23-5/8 2x2 2x4 Diffuse matte acrylic center OPTIONS For flexible whip options, see Technical Info. See page 4 for fixture details. EM/10W 10-watt emergency LED battery (120V-277V only; 2x2, 2x4 only) EM/10WLP Low-profile 10-watt emergency LED battery (120V-277V only; 1x4 only) EQCLIPS Earthquake clips (4 per fixture) (L ) Additional lower lumen packages available. Specify in increments of 100 nominal lumens. Option must be specified with next higher lumen package. Example: 5,000 nominal lumens = AT3-24-L55/835-D-(L50). SS Gasketed clear flat acrylic lens (not available with OCC option) AMW Anti-microbial white finish NEMA F NEMA Type F flange kit, factory-installed CP Chicago Plenum (CCEA) DRIVER Additional dimming drivers available, see Technical Info. DRV Driver prewired for non-dimming applications DIM 10% dimming driver prewired for 0-10V low voltage applications VOLTAGE V V UNV V V (not available with EM drivers) FEATURES XXStraight floating lens effect creates an appealing visual appearance. XXMatte white paint and diffuse lens combination provide pleasing architectural aesthetics with non-glare reflective surfaces XXSleek, extruded center compliments LX4 continuous light series. XXQuiet and smooth illumination for visual comfort XXHinged door frame with optical assembly swings down to allow easy access from room side of fixture XXOptional gasketed acrylic lens adds extra layer of protection XXRated for 25 C ambient operating temperature XXThis fixture is proudly made in the USA H.E. Williams, Inc. Carthage, Missouri Recessed Page 1 of 3

73 2/3 AT3-24-L40/935-D-DIM-BD-UNV R8 AT3 LED SPECIFICATIONS Housing Precision die-formed 22-gauge C.R.S. Door Frame Hinged, flat, extruded aluminum door frame with optical assembly. Shielding Diffuse polycarbonate lens and acrylic center standard. Finish 95% reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical High quality mid-power LED boards. L70 >60,000 hours per IES TM-21. Mounting NEMA Type G standard, NEMA Type F available. Listings cetlus conforms to UL STD 1598 and UL STD Certified to CAN/CSA STD C22.2 No Suitable for damp locations. DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at City of Chicago Environmental Air approved when specified with CP option. Warranty 5-year limited warranty, see hew.com/warranty. IMPORTANT: Electrostatic sensitive unit. Observe precautions when handling. ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE PERFORMANCE DATA LED PACKAGE DELIVERED LUMENS WATTAGE EFFICACY (LM/W) MULTIPLIER TABLE 1x4 COLOR TEMPERATURE L CCT/CRI CONVERSION FACTOR L L K/80CRI 0.97 L K/80CRI 0.99 L K/80CRI x2 4000K/80CRI 1.03 L K/80CRI 1.06 L L L x4 L L L L L L Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. Wattage shown is average for 120V through 277V input. Results based on 3500K, 80 CRI, actual lumens may vary +/-5% Use multiplier table to calculate additional options. PHOTOMETRY AT3-14-L63/830-D-DRV-120 Report #: ; 08/16/16 Total Luminaire Output: 6502 lumens; 68.3 Watts Efficacy: 95.2 lm/w 83 CRI; 3587K CCT IES Spacing Criteria: End: 1.1, Across: 1.1, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY AT3-22-L50/835-D-DRV-120 Report #: ; 07/18/16 Total Luminaire Output: 4878 lumens; 48.9 Watts Efficacy: 99.8 lm/w 82 CRI; 3557K CCT IES Spacing Criteria: End: 1.1, Across: 1.3, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION AT3-24-L70/830-D-DIM-UNV Report #: ; 02/29/16 Total Luminaire Output: 7144 lumens; 69 Watts Efficacy: lm/w 83 CRI; 3091K CCT IES Spacing Criteria: End: 1.1, Across: 1.2, Diagonal: Vertical Horizontal Angle Zonal 80 Angle 0º 45º 90º Lumens Zone Lumens % Fixture CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMEN SUMMARY Recessed Page 2 of 3 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW70538JJ REV.04/12/18

74 3/3 AT3-24-L40/935-D-DIM-BD-UNV R8 ARCHITECTURAL LED TROFFER STRAIGHT FLOATING CENTER FIXTURE DETAILS 2x2 2x4 BACK VIEW Access Plate with (2) 7/8 KOs 1x4 BACK VIEW AT3 LED (2) 7/8 KOs Access Plate with (2) 7/8 KOs (2 x 2 ) or 48 (2 x 4 ) NEMA TYPE F INSTALLATION 1 Min. 3-3/8 Max. 4-3/8 25-5/16 Note: Maximum recommended ceiling opening is 24-3/8 x for 2 x2 and 24-3/8 x 48-3/8 for 2 x4. For continuous row mounting, add 49-5/16 for each additional fixture to obtain ceiling opening. 1-5/16 between end plates. H.E. Williams, Inc. Carthage, Missouri Recessed Page 3 of 3

75 1/2 PRIOR APPROVAL FORM W1 TYPE W1 LSI 4 35 LTG2 UNV DB W WM N/A CORONET VODE Z2 4/0 48 CM AE Z LO 35 S6 0 WH 0 SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

76 2/2 PRIOR APPROVAL FORM W1 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

77 1/3 LSI 4 35 LTG2 UNV DB W WM W1 LS1 LED DATE PROJECT FIRM TYPE Linear luminaire with small profile providing continuous light. For indoor applications. Suspended, surface or wall mount installation. For custom mounting consult factory. FEATURES Available In Custom Lengths & Long Runs To 1/16 Accuracy Corners & Patterns Available (See Page 2) Damp Location Rated CRI 90+ Standard 5 Year, 50,000 Hour Fixture Warranty 2700K, 3000K, 3500K, 4000K & 5000K Color Temperatures Available Enlighted/Wattstopper Sensors Available APPLICATIONS CONSTRUCTION WARRANTY Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors Extruded Aluminum Housing with Die Cast Ends. OPTICS Formed Steel Gear Tray Extruded High Transmission Satin Acrylic Lens With No LED Imaging. Additional Optics Available. 5 Year Limited Warranty (Covers Standard Components) FINISH Standard Powder-Coated White. Custom RAL Colors Available FIXTURE RATINGS & CERTIFICATIONS Union Made ETL Listed Made In The USA Damp Location Rated ELECTRICAL Integral Driver With 0-10V 10% Dimming Standard. Several Driver Options Available. See Below For Lutron Dimming Information 2-Wire Forward Phase; Hi-Lume 1% Dimming, Only Available For 120V 3-Wire EcoSystem; Hi-lume 1% Dimming Digital EcoSystem; Hi-lume 1% Dimming, Soft-on Fade-to-black (Required for Daylighting) 5 Series EcoSystem; 5% Dimming LTEA L3DA LDE1 LDE5 EXTRUSION DIMENSIONS LED SYSTEM INFORMATION System Watts Delivered Lumens Efficacy Standard (LTG1) Low (LTG2) 7.25 W/ft 5 W/ft 683 Lm/ft 470 Lm/ft 94 Lm/W 94 Lm/W High (LTG3) 8.75 W/ft 783 Lm/ft 90 Lm/W Based on a 3500K luminaire using one driver. Please consult factory for custom lumen outputs & wattage. ORDERING FIXTURE ID LS1 LED 2 - LENGTH 2-2 ft 4-4 ft 8-8 ft x -x - Custom (specify length) **Patterns available, consult factory 3 - COLOR TEMP 4 - LED SYSTEM K/90 CRI LTG1 - Standard K/90 CRI LTG2 - Low K/90 CRI LTG3 - High K/90 CRI C - Custom Output K/90 CRI (ie-c550lm/ft) TW* - Tunable White RGBW* - RGB K *Must use DMX Driver (Remote) 5 - VOLTAGE UNV - Universal (120/277V) 6 - DRIVER DB - Standard 10% Dimming (0-10V) DB1% - 1% Dimming (0-10V) DB.01% -.01% Dimming (0-10V) LTEA* - Lutron 2-wire 1% Dimming L3DA* - Lutron 3-wire 1% Dimming LDE1* - Lutron Digital EcoSystem LDE5* - 5 Series EcoSystem; 5% Dimming *Refer to Electrical Information Above DMX - For Color Tuning and RGBW 7 - FINISH W - White (Standard) BLK - Black CC - Custom Color (provide RAL#) 8 - MOUNTING AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount 9 - CONTROL EIS - Integral Sensor by Enlighted WIS - Integral Sensor by Wattstopper 10 - OPTICS SD - Standard Diffuser BW - Batwing Optic ASYM - Asymmetric Optic 11 - OPTIONS EM 120V - Emergency Pack EM 277V - Emergency Pack CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/3

78 2/3 LSI 4 35 LTG2 UNV DB W WM W1 LS1 LED DATE PROJECT FIRM TYPE MOUNTING OPTIONS AC - Air Craft Cable (50 ) SM - Surface Mount WM - Wall Mount Round Canopy (Standard White Finish) 2 - Canopy Retainer 3 - SJT Cord (Standard White) 4 - Air Craft Cable 5 - Gripper 6 - Hanging Bracket 1 - Threaded Rod (not supplied) Wall Mount Bracket CORNERS & PATTERNS Available with illuminated corners, angles, and custom patterns. Must consult factory for custom corners and patterns. Square Patterns X Patterns T Patterns Custom Angles Custom Patterns LENS CUT OPTIONS Straight-cut Mitered Angle NOTE: Straight-Cut is standard configuration, Mitered Angle is optional and must be specified. CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/3

79 3/3 LSI 4 35 LTG2 UNV DB W WM W1 LS1 LED DATE PROJECT FIRM TYPE PHOTOMETRICS LS1 LED 4FT LTG1 3500K DELIVERED LUMENS: 2,733Lm TOTAL WATTS: 29W EFFICACY: 94 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED 4FT LTG2 3500K DELIVERED LUMENS: 1,880Lm TOTAL WATTS: 20W EFFICACY: 94 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE LS1 LED 4FT LTG3 3500K DELIVERED LUMENS: 3,133Lm TOTAL WATTS: 35W EFFICACY: 90 Lumens/Watt ZONAL LUMEN SUMMARY ZONE LUMENS % LAMP % FIXTURE CORONET, Inc. 55 Shepherds Lane Totowa, NJ T F CORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/3

80 1/2 PRIOR APPROVAL FORM S1 TYPE S1 75S-4-L30/835-DIM-BD-UNV N/A HE WILLIAMS LITHONIA - ZL1N L48 SMR 3000LM FST MVOLT 35K 80CRI WH SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

81 2/2 PRIOR APPROVAL FORM S1 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

82 1/4 75S-4-L30/835-DIM-BD-UNV S1 CATALOG #: TYPE: NARROW LED STRIP 75 LED PROJECT: NOTES: EXAMPLE L85/840 - OPTIONS - DIM - UNV t t t t t t t SERIES NOMINAL LUMEN CRI & OPTIONS/ DRIVER VOLTAGE LENGTH PACKAGE CCT ACCESSORIES CROSS SECTION 75 & 75R Shown 2-3/4 75 Shown 2 2-9/16 75R Shown ORDERING INFORMATION SERIES 75 Narrow LED Strip 75R Round Lens LED Strip 75S Square Lens LED Strip NOMINAL LENGTH 2 2 (Actual length 22-1/2 ) 4 4 (Actual length 44-5/8 ) 8 8 (Actual length 89-1/4 ) 3-5/16 2-9/16 75S Shown OPTIONS C2_ EM/10WLP 3 EM/10W REMOTE Two circuit quick-connect wiring harness (See Technical Info for complete quick-connect offering.) Low-profile 10-watt emergency LED battery (4 and 8 only; must specify 120V or 277V) Remote mount 10-watt emergency LED battery (2 only; must specify 120V or 277V) FEATURES XXSmall fixture profile allows inconspicuous placement in coves or confined spaces. XXRound and square lensed fixtures provide a clean look for architectural environments. XXRow applications produce continuous light with minimal interruption between fixtures. XXDiffuse acrylic lens on 75R and 75S enhances uniformity and minimizes glare. XXVariety of mounting accessories for surface and suspended applications. XX3000K, 3500K, 4000K, or 5000K CCT. XXSpecial reflectors are available to provide precise light distribution (75 only). XXThis fixture is proudly made in the USA. LED PACKAGE Example: L85/840 LUMEN PACKAGE NOMINAL LUMENS 2 MINIMUM CRI & CCT WATTAGE L15 1, = 80CRI, 3000K 12 L20 1, = 80CRI, 3500K 20 L30 2, = 80CRI, 4000K 24 L40 1 3, = 80CRI, 5000K 33 4 L30 3, = 80CRI, 3000K 23 L50 5, = 80CRI, 3500K 44 L65 6, = 80CRI, 4000K 49 L85 1 8, = 80CRI, 5000K 73 8 L60 6, = 80CRI, 3000K 43 L100 10, = 80CRI, 3500K 77 L130 13, = 80CRI, 4000K 97 L , = 80CRI, 5000K 146 Nominal lumen output based on 4000 CCT. Actual lumens may vary +/-5%. See specific photometric tests. ACCESSORIES (ordered separately) See page 4 for special reflectors, ordered separately. Aircraft cable accessories available, see page 4. WG-7511-LED 11-gauge white powder coat wireguard (available with 75 only) WG-7514-LED 14-gauge white powder coat wireguard (available with 75 only) /2 ceiling spacer VBY (2) Y-hangers VBY-2 RA-75 (2) Y-hangers and (2) 2 chains Row aligner (required when mounting with aircraft cables) DRIVER Additional dimming drivers available, see Technical Info. DRV Driver prewired for non-dimming applications DIM 10% dimming driver prewired for 0-10V low voltage applications VOLTAGE V V UNV V V (not available with EM drivers) 1 Available with 75 only. H.E. Williams, Inc. Carthage, Missouri Strips Page 1 of 4

83 2/4 75S-4-L30/835-DIM-BD-UNV S1 75 NARROW LED STRIP LED SPECIFICATIONS Housing 22-gauge die-formed C.R.S. Finish 92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. Electrical High quality mid-power LED board. Rated for 50,000 hours at 70% lumen maintenance (L70). 25 C maximum ambient operating temperature. Mounting Surface (ceiling or wall) or suspended. Labels cetlus conforms to UL STD Certified to CAN/CSA STD C22.2 No Suitable for damp locations. Warranty 5-year limited warranty, see hew.com/warranty. IMPORTANT: Electrostatic sensitive unit. Observe precautions when handling. PHOTOMETRY 75-4-L85/840-DIM Report #: ; 01/03/14 Total Luminaire Output: 8470 lumens; 71.6 Watts Efficacy: lm/w 83.6 CRI; 4053K CCT IES Spacing Criteria: End: 1.3, Across: CANDLEPOWER DISTRIBUTION CANDLEPOWER DISTRIBUTION Vertical Horizontal Angle Zonal Angle 0º 45º 90º Lumens R-4-L65/835 Report #: ; 03/02/17 Total Luminaire Output: 6223 lumens; 52 Watts Efficacy: 120 lm/w 84.5 CRI; 3515K CCT IES Spacing Criteria: End: 1.2, Across: 1.3, Diagonal: Vertical Horizontal Angle Zonal Angle 0º 45º 90º Lumens LUMEN SUMMARY LUMEN SUMMARY Zone Lumens % Fixture Zone Lumens % Fixture S-4-L65/835 Report #: ; 03/02/17 Total Luminaire Output: 6223 lumens; 52 Watts Efficacy: 120 lm/w 84.6 CRI; 3518K CCT IES Spacing Criteria: End: 1.2, Across: 1.2, Diagonal: Vertical Horizontal Angle Zonal Angle 0º 45º 90º Lumens CANDLEPOWER DISTRIBUTION LUMEN SUMMARY Zone Lumens % Fixture Strips Page 2 of 4 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice.

84 3/4 75S-4-L30/835-DIM-BD-UNV S1 NARROW LED STRIP 75 FIXTURE PERFORMANCE DATA LED 75 (no lens) 75R & 75S LED PACKAGE WATTAGE DELIVERED LUMENS EFFICACY (lm/w) DELIVERED LUMENS EFFICACY (lm/w) 2 L L L L L L L L L L L L Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. Wattage shown is average for 120V through 277V input. Results scaled based on relative CCT output. Use multiplier table to calculate additional options. FIXTURE DETAILS MOUNTING INFORMATION MULTIPLIER TABLE CCT/CRI COLOR TEMPERATURE CONVERSION FACTOR 3000K/80CRI K/80CRI K/80CRI K/80CRI 1.04 A C E F B D Stand Alone Subsequent MOUNTING LENGTH AIRCRAFT CABLE VBY HANGER 315 SPACER A B C D E F /2 22-1/ / / /8 44-5/8 41-1/4 44-5/ / / / / /4 BACK VIEW 3-1/4 (2) ø7/8 KOs G (4) ø1/4 Holes 1-3/4 ACTUAL FIXTURE LENGTH (G) / / /4 ACCESSORIES DETAILS Wireguard 3-3/8 VBY hanger 315 ceiling spacer 3-5/16 WG-7511-LED Wireguard shown installed (75 only) VBY Y-hanger shown installed 315 Ceiling spacer shown installed RA-75 Row aligner shown installed H.E. Williams, Inc. Carthage, Missouri Strips Page 3 of 4

85 4/4 75S-4-L30/835-DIM-BD-UNV S1 75 NARROW LED STRIP LED AIRCRAFT CABLES (requires RA75 row aligner) FEEDER FIXTURE ø1/16 AIRCRAFT CABLE EXAMPLE: ACF/D48 MOUNTING TYPE LENGTH ACF/ = Aircraft D = 1 grid & hardpan N = 9/16 grid S = Slot grid 24 = = = 96 Fixtures are provided with adjustable length aircraft cables and mounting hardware, must specify. JOINER FIXTURE ø1/16 AIRCRAFT CABLE EXAMPLE: ACF/D48 MOUNTING TYPE LENGTH ACJ/ = Aircraft D = 1 grid & hardpan N = 9/16 grid S = Slot grid 24 = = = 96 Fixtures are provided with adjustable length aircraft cables and mounting hardware, must specify. NOTE: Electrical supply is brought into the feeder (or stand-alone) fixture, either as part of a row or as an individual mount unit. Joiner fixtures complete the row. SPECIAL REFLECTORS (ordered separately, only available with 75) Example: R LED REFL R1015 R1172 R1324 R /16 2-3/4 4-1/ / /16 5-7/16 3-3/4 3-1/4 Strips Page 4 of 4 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW70430JL REV.08/16/17

86 1/2 PRIOR APPROVAL FORM S2 TYPE S2 LPU P LPACE P N/A CONTECH SPECTRA - HUC523 MVOLT LED35 S1 LX12 AM SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

87 2/2 PRIOR APPROVAL FORM S2 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

88 1/2 LPU P LPACE P S2 Catalog No. LPU2 LED Undercabinet Lighting Type Project Specifications/Features Housing 120V/277V Triac dimmable Integral driver in each unit Superior versatility, color rendering and efficiency. Resistant to shock and vibration. No infrared or ultraviolet radiation. Thin profile; less than 1" in depth. Bronze or white finish with frosted lens. Each unit includes: 72" Power Connector (LPAPL72), 12" Jumper Cable (LPAC12), End-to-End Connector (LPACE), Conduit Connector and Mounting Screws. 277V Unit does not include 72" Power Connector; hardwire only. Assorted flexible connections allow for continuous row applications as well as applications with bends and corners. Linkable to 200W max. Integral ON/OFF switch, along with High/Low switch. Optional Occupancy Sensor available (LPAOCC). See LPAOCC Spec Sheet for details. Lamp Selectable switch allows selection of three (3) different color temperatures: 2700K, 3000K, and 4000K. CRI: 90 12": 5W/250Lm - 300Lm 18": 8W/380Lm - 450Lm 24": 12W/850Lm - 900Lm 32": 16W/950Lm Lm Mounting Built in LED driver and large knockout plate in the back makes for effortless installation. Warranty This complete fixture is covered by ConTech s full five (5) year replacement guarantee after date of purchase. Listing cetlus listed. Suitable for dry locations. Meets Title 24 requirements. MODEL L W H LPU /16" 3-5/8" 1" LPU /16" 3-5/8" 1" LPU /16" 3-5/8" 1" LPU /16" 3-5/8" 1" Ordering Information Example Order: LPU2241 P Fixture Length Voltage Finish Accessories LPU /16" /16" /16" /16" 1-120V 2-277V BZ - Bronze P - White LPAOCC-(B,P) - Occupancy Sensor LPACE-(B,P) - End-to-End Connector LPAC6-(B,P) - 6" Jumper Cable LPAC12-(B,P) - 12" Jumper Cable LPAC24-(B,P) - 24" Jumper Cable LPAC72-(B,P) - 72" Jumper Cable LPAHW72-(B,P) - 72" 3-Wire Hardwire Connector LPAPL72-(B,P) - 72" Plug-and-Play Connector (120V Only) Finish Codes: -B (Black), -P (White) Please Recycle All specifications subject to change without notice.

89 2/2 LPU P LPACE P S2 Catalog No. LPU2 LED Undercabinet Lighting Type Project Photometrics 12" H 6" 6" A1 A1 A B1 B B1 C1 C C1 D 6" D1 12" D1 12" LPU2 - HIGH Designed for 50,000 Hour Lamp Life*; LM-79 Test No Light Output (Fixture Lumens): 337 Total Watts@120V: 5.5 Lumens Per Watt: 61 Color Rendering Index (CRI)¹: 90 Color Temperature (CCT)²: 3000K Spectral Power Distribution Chart³ 10 Lamp Spacing Cabinet Footcandles on Horizontal Plane From Wall (in.) Elevation H (in.) A A1 B B1 C C1 D D Wavelength (nm) LPU2 - LOW Designed for 50,000 Hour Lamp Life*; LM-79 Test No Light Output (Fixture Lumens): 287 Total Watts@120V: 5.7 Lumens Per Watt: 50 Color Rendering Index (CRI)¹: 90 Color Temperature (CCT)²: 3000K Spectral Power Distribution Chart³ 10 Lamp Spacing Cabinet Footcandles on Horizontal Plane From Wall (in.) Elevation H (in.) A A1 B B1 C C1 D D Wavelength (nm) 1. Accuracy of rendering colors 2. Color appearance of light source 3. Colors present within the light source *Dependent on surrounding temperatures Please Recycle All specifications subject to change without notice.

90 1/2 PRIOR APPROVAL FORM X1 TYPE X1 EXIT-G-EM-WHT-D N/A HE WILLIAMS LITHONIA - LQM S W 3 G 120/277 SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

91 2/2 PRIOR APPROVAL FORM X1 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

92 1/2 EXIT-G-EM-WHT-D X1 CATALOG #: PROJECT: LED EXIT SIGN NOTES: TYPE: EXIT LED EXAMPLE EXIT - R - EM - WHT - OPTIONS t t t t t SERIES LETTER POWER HOUSING OPTIONS/ COLOR OPTIONS COLOR ACCESSORIES CROSS SECTIONS 7-1/2 12-3/4 1-3/4 ORDERING INFORMATION SERIES EXIT LED Exit Sign LETTER COLOR (Must specify) R Red G Green POWER OPTIONS (Must specify) AC AC operation EM AC operation with emergency battery backup HOUSING COLOR (Must specify) WHT Industry-standard white BLK Black OPTIONS COPY/SF Custom message (consult factory), single face COPY/DF Custom message (consult factory), double face SALIDA Salida faceplate (industry-standard white only) DC Dual circuit (AC only) SDT Self-diagnostic test (EM only) SV Special voltage, consult factory for options FEATURES XXCompact, low-profile design XXUltra-bright, energy efficient, long-life LEDs available in red or green. XXAvailable as full-time AC powered unit or emergency unit with battery backup. XXFully automatic solid-state system on EM units recharges battery in 24 hours. XX4.8V long-life, maintenance-free NiCd battery on emergency (EM) units provides 90 minutes of emergency operation. XXCharge rate/power on LED indicator and built-in test switch on emergency units. XXProvided as universal single face/double face unit. XXRemovable directional indicators. XXCustom messages available, consult factory for details. ACCESSORIES (Shipped separately) See back for details. PC1 Polycarbonate shield WG Wireguard H.E. Williams, Inc. Carthage, Missouri Emergency Page 1 of 2

93 2/2 EXIT-G-EM-WHT-D X1 EXIT LED SPECIFICATIONS Housing Injection-molded, engineeringgrade, 5VA flame retardant, high-impact resistant, thermoplastic. Electrical Universal voltage, 120 or 277 VAC operation. Mounting Universal mounting canopy for top or side installation. Labels Listed to UL 924 standard as an exit light suitable for dry or damp locations (0 C - 50 C). Meets NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Warranty 5-year limited warranty ELECTRICAL INFORMATION LED EXIT SIGN Input Watts (W) Input Amps (A) Catalog Number 120V 277V 120V 277V EXIT ACCESSORIES PC1 WG Emergency Page 2 of 2 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW46248JL REV.06/30/16

94 1/2 PRIOR APPROVAL FORM X2 TYPE X2 EXIT-G-EM-WHT-D N/A HE WILLIAMS LITHONIA - LQM S W 3 G 120/277 SHEET E0-02 FIXTURE SCHEDULE SECTION SUBSTITUTIONS PROCEDURES

95 2/2 PRIOR APPROVAL FORM X2 IW INCORPORATED 139 HEADINGLY NW ALBUQUERQUE, NM LEANNE EARLY PROJECT SUBMITTALS JUNE 5,

96 1/2 EXIT-G-EM-WHT-D X2 CATALOG #: PROJECT: LED EXIT SIGN NOTES: TYPE: EXIT LED EXAMPLE EXIT - R - EM - WHT - OPTIONS t t t t t SERIES LETTER POWER HOUSING OPTIONS/ COLOR OPTIONS COLOR ACCESSORIES CROSS SECTIONS 7-1/2 12-3/4 1-3/4 ORDERING INFORMATION SERIES EXIT LED Exit Sign LETTER COLOR (Must specify) R Red G Green POWER OPTIONS (Must specify) AC AC operation EM AC operation with emergency battery backup HOUSING COLOR (Must specify) WHT Industry-standard white BLK Black OPTIONS COPY/SF Custom message (consult factory), single face COPY/DF Custom message (consult factory), double face SALIDA Salida faceplate (industry-standard white only) DC Dual circuit (AC only) SDT Self-diagnostic test (EM only) SV Special voltage, consult factory for options FEATURES XXCompact, low-profile design XXUltra-bright, energy efficient, long-life LEDs available in red or green. XXAvailable as full-time AC powered unit or emergency unit with battery backup. XXFully automatic solid-state system on EM units recharges battery in 24 hours. XX4.8V long-life, maintenance-free NiCd battery on emergency (EM) units provides 90 minutes of emergency operation. XXCharge rate/power on LED indicator and built-in test switch on emergency units. XXProvided as universal single face/double face unit. XXRemovable directional indicators. XXCustom messages available, consult factory for details. ACCESSORIES (Shipped separately) See back for details. PC1 Polycarbonate shield WG Wireguard H.E. Williams, Inc. Carthage, Missouri Emergency Page 1 of 2

97 2/2 EXIT-G-EM-WHT-D X2 EXIT LED SPECIFICATIONS Housing Injection-molded, engineeringgrade, 5VA flame retardant, high-impact resistant, thermoplastic. Electrical Universal voltage, 120 or 277 VAC operation. Mounting Universal mounting canopy for top or side installation. Labels Listed to UL 924 standard as an exit light suitable for dry or damp locations (0 C - 50 C). Meets NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Warranty 5-year limited warranty ELECTRICAL INFORMATION LED EXIT SIGN Input Watts (W) Input Amps (A) Catalog Number 120V 277V 120V 277V EXIT ACCESSORIES PC1 WG Emergency Page 2 of 2 H.E. Williams, Inc. Carthage, Missouri Information contained herein is subject to change without notice. HEW46248JL REV.06/30/16

98 PSUBMITTAL REVIEW Lighting Prior Approval JOB: San Juan Regional Medical Center ER Renovation JOB NO: DATE RECEIVED: 6/12/2018 DATE RETURNED: 6/12/2017 REV - Reviewed R&R - Revise and Resubmit REJ - Rejected FAC - Furnish as Corrected (no Resubmittal required UNO) NR - Not Reviewed Corrections or comments made on the shop drawings during this review do not relieve the contractor from compliance with the requirements of the drawings and specifications. This check is only for review of general conformance with the design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for: confirming and correlating all quantities and dimensions; selecting fabrication processes and techniques of construction, coordinating their work with that of all other trades and performing his work in a satisfactory manner. Date: 6/12/2018 By:_Duane Despain_ BG Buildingworks, Inc. Review notes: 1. This prior approval submittal is for type S2 only. All other fixtures are represented by RKL Sales. 2. The submittal included sheets showing LED and fluorescent versions of the fixture. The LED version was indicated as the proposed substitute. The sheets referencing the fluorescent version of the fixture have been removed from the submittal by BG Buildingworks. ITEM ACTION REMARKS S2 REV LED version A L B U Q U E R Q U E A V O N D E N V E R F O R T C O L L I N S

99 RKL SALES CORP 4417 CORRALES RD SUITE A CORRALES, NM Phone: Fax: San Juan Regional Medical Center /12/2018 Submission Type Prior Approval Corrections Resubmittal for Approval Your Use Approval Other