Evolve LED Roadway Lighting

Transcription

1 GE Lighting Evolve LED Roadway Lighting Scalable Project Grade Cobrahead (ERS & ERS) imagination at work

2 Product Features From local to major roadways, the GE Evolve LED Roadway Scalable Cobrahead fixtures are changing the way you light your lanes. Preserving the aesthetic look of traditional roadway Cobrahead fixtures, GE balances the technical needs of a sophisticated LED system with the functional demands of an outdoor fixture facing extreme weather hazards. GE s advanced LED optical design offers hundreds of photometric options to meet your precise lighting requirements, while delivering reduced glare and improved light control. The refined thermal management system incorporates a sleek and robust heat sink directly into the fixture to ensure maximum heat transfer and long LED life. The GE Evolve LED Roadway Scalable Cobrahead offers more than years of reliable service life to significantly reduce maintenance frequency and expense, based on a 50,000 hour life and hours of operation per day. Applications Designed to meet recommended luminance and illuminance requirements for local to major roadway / street classifications. Housing Die cast aluminum housing. A modern design preserving the aesthetic look of traditional roadway Cobrahead fixtures incorporates the heat sink directly into the unit ensuring maximum heat transfer and long LED life. Meets 3G vibration per C Power door assembly with removable retention latch. LED & Optical Assembly Structured LED array for optimized roadway photometric distribution. Evolve light engine consisting of scalable reflective technology designed to optimize application efficiency and minimize glare. Reverse facing light engine options available. Utilizes high brightness LEDs, 70 CRI at typical. LM-79 tests and reports are performed in accordance with IESNA standards. Lumen Maintenance Lumen Maintenance and TM listed below each Lumen Data Table Ratings / listed, suitable for wet locations per UL 598. IP66 rated optical enclosure per ANSI C Temperature rated at 40 to 40 C. Delayed start maybe experienced below -35 C. Upward Light Output Ratio (ULOR) = 0. Mounting Slipfitter with +/- 5 degree of adjustment for leveling. Integral die cast mounting pipe stop feature. Wildlife intrusion protection at mounting pipe entry. Adjustable for.5 in. or in. mounting pipe. Finish Corrosion resistant polyester powder painted, minimum.0 mil. thickness. Standard colors: Black and Gray. RAL & custom colors available. Electrical 0-77 volt. System power factor is >90% and THD <0%. Class A audible sound rating. Integral surge protection: For 0-66VAC per IEEE/ANSI C , 6kV/3kA Location Category B3 (0 events) Optional higher rating surge protection device available EMI: Title 47 CFR Part 5 Class A. Photo electric sensors (PE) available for all voltages. Optional Low Voltage Indicator (LVI) light in driver door assembly. * System power factor and THD is tested and specified at 0V input and maximum load conditions. Ambient Temperature Conversion Table AMBIENT TEMPERATURE ( C) INITIAL LUMENS FACTOR INITIAL WATTS FACTOR

3 Ordering Number Logic Scalable Project Grade Cobrahead (ERS) E R S PROD. ID VOLTAGE OPTICAL CODE PHOTOMETRIC TYPE DRIVE CURRENT LED COLOR TEMP PE FUNCTION COLOR OPTIONS E = Evolve R = Roadway S = Scalable = Single Module Optical Assembly PRODUCT ID 0 = 0-77 = 0 = 08 3 = 40 4 = 77 OPTICAL CODE Product Tier * = Project Grade See Charts for all levels PHOTOMETRIC TYPE A = Extra Narrow 5 = 55mA 40 = Asymmetric B = Narrow Asymmetric (Medium) B = Narrow Asymmetric C = Asymmetric (Short) D = Asymmetric Forward D = Asymmetric Forward E = Asymmetric (Medium) E = (Asymmetric (Medium) TYPICAL SYSTEM TYPICAL INITIAL TYPICAL INITIAL DRIVE WATTAGE LUMENS LPW CURRENT 0-77V = None BLCK = Black = PE Rec. GRAY = Gray 4 = PE Rec. with Shorting Cap 5 = PE Rec. with Control 7 = GE Dimming 5-Pin PE Receptacle * 9 = GE Dimming 5-Pin PE Receptacle with Shorting Cap * When ordering PE function socket 7 or 9, a dimming driver add after dimming driver (D=Dimming) must also be ordered under the OPTIONS column * Order dimming control PE as a separate item NOTE: A= ANSIC Pin dimming receptacle, contact manufacturer IES FILE NUMBERS ERS A ERS C ERS D ERS F A ERS G ERS H ERS J ERS A ERS C ERS D ERS F B ERS G ERS H ERS J ERS B B ERS E ERS A ERS C ERS D ERS F C ERS G ERS H ERS J ERS A ERS C ERS D ERS F D ERS G ERS H ERS J ERS B D ERS E ERS A ERS C ERS D ERS F E ERS G ERS H ERS J ERS B E ERS E Lumen Maintenance Projected L88 (0K) 50,000 at Ta 5C Projected L70 (0K) > 00,000 at Ta 5C Based on 0,000h LM-80 data for Lumiled Luxeon-T (ZES chip family) D = Dimming* F = Fusing G = External Bubble Level L = Tool-Less Entry R = Additional Secondary Surge Protection Device T = GE Energy Extreme Surge Protection per IEEE/ANSI C Rating - 0kV/5kA Location Category (0 events). - Rating - 6kV/3kA Location Category C-Low (5000 events). XXX = Special Options * When ordering Dimming PE Receptacle 7, 9 or A, D=Dimming driver must be selected under OPTIONS column NOTE: If no dimming receptacle under PE Function is selected and D+Dimming is selected under OPTIONS, 0-0v dimming leads will be provided with access through slipfitter opening in unit NOTES: MAX OPERATING TEMP 40 C

4 Photometrics Scalable Project Grade Cobrahead (ERS) ERS Extra Narrow Asymmetric (JA) 3,300 Lumens GE ies ERS Narrow Asymmetric Medium (JB) 3,600 Lumens GE ies ERS Narrow Asymmetric (EB) 8,00 Lumens GE45675.ies ERS Asymmetric Short (JC) 3,600 Lumens GE45674.ies ISO Plot Polar Curve CU Graph Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Coefficients of Utilization Street Width / Mounting Height

5 Photometrics Scalable Project Grade Cobrahead (ERS) ERS Asymmetric Forward (JD) 3,300 Lumens GE ies ERS Asymmetric Forward (ED) 8,00 Lumens GE ies ERS Asymmetric Medium (JE) 3,600 Lumens GE ies ERS Asymmetric Medium (EE) 8,400 Lumens GE ies ISO Plot Polar Curve CU Graph Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Coefficients of Utilization Street Width / Mounting Height

6 Ordering Number Logic Scalable Project Grade Cobrahead (ERS) E R S PROD. ID VOLTAGE OPTICAL CODE PHOTOMETRIC TYPE DRIVE CURRENT LED COLOR TEMP PE FUNCTION COLOR OPTIONS E = Evolve R = Roadway S = Scalable = Double Module Optical Assembly 0 = 0-77 = 0 = 08 3 = 40 4 = 77 Product Tier * = Project Grade See Charts for all levels A = Extra Narrow 5 = 55mA 40 = Asymmetric B = Narrow Asymmetric (Medium) B = Narrow Asymmetric C = Asymmetric (Short) D = Asymmetric Forward D = Asymmetric Forward E = Asymmetric (Medium) E = (Asymmetric (Medium) = None BLCK = Black = PE Rec. GRAY = Gray 4 = PE Rec. with Shorting Cap 5 = PE Rec. with Control 7 = GE Dimming 5-Pin PE Receptacle * 9 = GE Dimming 5-Pin PE Receptacle with Shorting Cap * When ordering PE function socket 7 or 9, a dimming driver add after dimming driver (D=Dimming) must also be ordered under the OPTIONS column * Order dimming control PE as a separate item NOTE: A= ANSIC Pin dimming receptacle, contact manufacturer PRODUCT ID OPTICAL CODE PHOTOMETRIC TYPE DRIVE CURRENT TYPICAL SYSTEM WATTAGE 0-77V TYPICAL INITIAL LUMENS TYPICAL INITIAL LPW IES FILE NUMBERS ERS L ERS N ERS P A ERS Q ERS R ERS S ERS L ERS N ERS P B ERS Q ERS R ERS S ERS K B ERS M ERS L ERS N ERS P C ERS Q ERS R ERS S ERS L ERS N ERS P D ERS Q ERS R ERS S ERS K D ERS M ERS L ERS N ERS P E ERS Q ERS R ERS S ERS K E ERS M Lumen Maintenance Projected L83 (0K) 50,000 at Ta 5C Projected L70 (0K) > 88,000 at Ta 5C Based on 0,000h LM-80 data for Lumiled Luxeon-T (ZES chip family) D = Dimming* F = Fusing G = External Bubble Level L = Tool-Less Entry R = Additional Secondary Surge Protection Device T = GE Energy Extreme Surge Protection per IEEE/ANSI C Rating - 0kV/5kA Location Category (0 events). - Rating - 6kV/3kA Location Category C-Low (5000 events). XXX = Special Options * When ordering Dimming PE Receptacle 7, 9 or A, D=Dimming driver must be selected under OPTIONS column NOTE: If no dimming receptacle under PE Function is selected and D+Dimming is selected under OPTIONS, 0-0v dimming leads will be provided with access through slipfitter opening in unit NOTES: MAX OPERATING TEMP 40 C

7 Photometrics Scalable Project Grade Cobrahead (ERS) ERS Extra Narrow Asymmetric (SA),00 Lumens GE ies ERS Narrow Asymmetric (SB),800 Lumens GE ies ERS Narrow Asymmetric (MB) 5,800 Lumens GE ies ERS Asymmetric Short (SC),800 Lumens GE ies ISO Plot Polar Curve CU Graph Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Coefficients of Utilization Street Width / Mounting Height

8 Photometrics Scalable Project Grade Cobrahead (ERS) ERS Asymmetric Forward (SD),00 Lumens GE45679.ies ERS Asymmetric Forward (MD) 5,800 Lumens GE ies ERS Asymmetric Medium (SE),800 Lumens GE ies ERS Asymmetric Medium (ME) 6,400 Lumens GE45680.ies ISO Plot Polar Curve CU Graph Grid Distance in Units of Mounting Height at 30 Initial Footcandle Values at Grade Polar Trace Vertical and Horizontal Plane through Horizontal Angle of Maximum Candlepower Coefficients of Utilization Street Width / Mounting Height

9 Product Dimensions Scalable Project Grade Cobrahead (ERS).3 in. [54 mm] 4.5 in. [368 mm] Adjustable for -/4 to in. mounting pipe (.660 to.375 inch OD) [4 to 60 mm OD] 4.5 in. [4 mm] 7.0 in. [77mm] 5.4 in. [36 mm].8 in. R [300 mm R].3 in. [54 mm] 4.5 in. [368 mm] DATA Approximate Net Weight: 0 to 5 lbs. (9.07 to.34 kgs.) Contact manufacturer for specific configuration weight. Effective Projected Area (EPA): sq. ft. max (0.046 sq. m)

10 Product Dimensions Scalable Project Grade Cobrahead (ERS) 5.9 in. [659 mm] 4.5 in. [368 mm] Adjustable for -/4 to in. mounting pipe (.660 to.375 inch OD) [4 to 60 mm OD] 4.5 in. [4 mm] 7.0 in. [77mm] 5.4 in. [36 mm].8 in. R [300 mm R] 5.9 in. [659 mm] 4.5 in. [368 mm] DATA Approximate Net Weight: 5 to 9 lbs. (.34 to 3.5 kgs.) Contact manufacturer for specific configuration weight. Effective Projected Area (EPA): sq. ft. max (0.065 sq. m) GE Lighting -888-MY-GE-LED ( ) GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Evolve and the GE brand and logo are trademarks of the General Electric Company. 04 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. OLP /30/4