Large body 192x192x200 mm

Size: px

Start display at page:

Download "Large body 192x192x200 mm"

Russell Heath
6 years ago
Views:

Large boy 192x192x200 mm A new line of spotlights evelope as a iscreet, yet flexible answer to multiple lighting nees in urban architecture an resiential areas.

1 Large boy 192x192x200 mm A new line of spotlights evelope as a iscreet, yet flexible answer to multiple lighting nees in urban architecture an resiential areas. is available in three sizes (small, meium an large boy) an is characterise by a compact, essential esign that has been especially stuie to simplify installation an maintenance operations with minimum visual impact. Invisible gaskets, flush protection glass, pullout componentplate, simplifie opening with captive screws of li an front frame, an hien ajustable bracket are just a few of the many pluses of this line. The wie selection of accessories, which inclues spill rings for all the optics, an the practical ajustability of the boy convert in a highly flexible prouct able to guarantee high performance with maximum visual comfort. The use of the innovative Power LED technology, available for the small an meium boy, in warm white an neutral white colour temperatures, creates suggestive atmospheres, elivering excellent light output an high energy saving. pillring for visual comfort Highperforming optics 76

2 esign Mario Cucinella Meium boy 155x155x165 mm mall boy 132x132x140 mm Low maintenance (long life of LED) for LED version Neutral white (4200K) Warm white (3100K) Ajustability (+95 / 5 ) with hien bracket Moularity of accessories lush glass (no water stagnation) pike (small boy) 77

esign Mario Cucinella The system boasts a

flexible lighting an meet the lighting an

$iffusers an refractors, an the cylinrical$ screen for better efinition an focusing of

louvers ensure extreme aaptability to lighting

protection guarantees total safety against

3 esign Mario Cucinella The system boasts a large selection of accessories to ensure flexible lighting an meet the lighting an safety requirements of application settings at best. The chromatic filters, the glass iffusers an refractors, an the cylinrical screen for better efinition an focusing of light cone, the flaps, visors an lamellar louvers ensure extreme aaptability to lighting schemes, while the practical gri for glass protection guarantees total safety against vanalism. Visor Prismatic glass iffuser Coloure filters laps Lamellar louvre for AT optic 78

esign Mario Cucinella In aition to the rich collection of optics, has evelope a wie range of antiglare spill

The spill rings have been carefully stuie for the ifferent boies of the proucts an for each type of optic

The luminous effects create by the multiple light cones allow for illuminating spaces at best, increasing

Cutoff angles with an without spill ring pill ring The large boy with 150W HIT coe BD59 an BD61 cannot use

Optic uper pot pot loo Asymmetrical longituinal Asymmetrical transversal α Cutoff CUTO CUTO CUTO ʹ CUTO mall

4 esign Mario Cucinella In aition to the rich collection of optics, has evelope a wie range of antiglare spill rings for maximum visual comfort in all settings. The spill rings have been carefully stuie for the ifferent boies of the proucts an for each type of optic available: super spot, spot, floo, asymmetrical longituinal an asymmetrical transversal. The luminous effects create by the multiple light cones allow for illuminating spaces at best, increasing the cutoff angle an avoiing unpleasant glare. Cutoff angles with an without spill ring pill ring The large boy with 150W HIT coe BD59 an BD61 cannot use the spill ring in ownlight position. Use the lamellar louvers to optimise visual comfort. Optic uper pot pot loo Asymmetrical longituinal Asymmetrical transversal α Cutoff CUTO CUTO CUTO ʹ CUTO mall boy (α 30 ) (α 38 ) Meium boy (α 40 ) (α 40 ) Long. lamp. (α 36 ) Transv. lamp. (α 32 ) Large boy (α 30 ) (α 30 ) Long. lamp. (α 30 ) α 45 Long. lamp (α 27 ) Transv. lamp. (α 28 ) α 45 Transv. lamp (α 18 ) Data (α) in parenthesis refers to fitting without spill ring 79

esign Mario Cucinella uperspot Optic () A very narrow, exact light beam highlights architectural etails with small imensions from very large istances,

ø Emax Eme 20 m 2 m 251 lux 177 lux 35 m 3,5 m 82 lux 58 lux 50 m 5,2 m 40 lux 28 lux pot optic () Effective lighting to valorise architectural

ø Emax Eme 15 m 3 m 80 lux 55 lux 20 m 4 m 45 lux 32 lux 25 m 5,2 m 28 lux 20 lux loo optic () It is the best solution to provie wie uniform light on

5 esign Mario Cucinella uperspot Optic () A very narrow, exact light beam highlights architectural etails with small imensions from very large istances, incluing from one builing to another. ø HIT 70 W G12 ill. ab. ø Emax Eme 20 m 2 m 251 lux 177 lux 35 m 3,5 m 82 lux 58 lux 50 m 5,2 m 40 lux 28 lux pot optic () Effective lighting to valorise architectural elements with meium imensions. Ieal to highlight vertical elements with grazing uplight or ownlight emission. ø HIT (HCITC) 35 W G8,5 ill. ab. ø Emax Eme 15 m 3 m 80 lux 55 lux 20 m 4 m 45 lux 32 lux 25 m 5,2 m 28 lux 20 lux loo optic () It is the best solution to provie wie uniform light on architectural elements an façaes with meiumlarge size. The picket application is ieal for wie, uniform light in green an resiential areas. ø HIT (CDMTm) 20 W PGJ5 ill. ab. ø Emax Eme 5 m 2,5 m 136 lux 44 lux 10 m 5,2 m 35 lux 23 lux 15 m 8 m 15 lux 10 lux 80

esign Mario Cucinella Asymmetrical longituinal optic (AL) The elliptical istribution enlarges the light beam laterally.

L1 L2 Isolux h=5m α=0 HIT HCITC G8,5 35W 21 16 13 9 5 2 1,2 0,8 m 1 0 1 2 3 4 5 6 7 8 9 10 Asymmetrical transversal optic (AT) Ieal to illuminate large surfaces an façaes from the groun with uniform

L1xL2 4 m 8x10 m HTDE 150 W Rx7s Emax 200 lux Eme 70 lux 6 m 12x14 m 88 lux 32 lux 8 m 16x18 m 50 lux 18 lux Combine optics The application of multiple proucts in ifferent sizes an in combination

6 esign Mario Cucinella Asymmetrical longituinal optic (AL) The elliptical istribution enlarges the light beam laterally. Especially suitable for uniform lighting of pathways an transit areas with consierable istance between proucts. L1 L2 Isolux h=5m α=0 HIT HCITC G8,5 35W ,2 0,8 m Asymmetrical transversal optic (AT) Ieal to illuminate large surfaces an façaes from the groun with uniform emission. The istribution is characterise by asymmetrical beam with maximum intensity at 60 an wie longituinal an transversal opening. L2 L1 ill. ab. L1xL2 4 m 8x10 m HTDE 150 W Rx7s Emax 200 lux Eme 70 lux 6 m 12x14 m 88 lux 32 lux 8 m 16x18 m 50 lux 18 lux Combine optics The application of multiple proucts in ifferent sizes an in combination with ifferent optics elivers mixe lighting to enhance the structural elements of builing façaes. In the example, the spot optic with refractor for elliptical istribution of the light flux exalts horizontal elements, such as cornices, an minimizes shaows, while the floo optic guarantees large, uniform luminous emission. The use of the floolight with spot optic an cyliner highlights vertical etails an ensures clean luminous istribution. Refractor Cylinrical screen 81

$Reuces irect glare from lamp in certain angles. AL AT Prismatic glass iffuser for LED an refractor Mounte insie the boy of the fitting. Glass iffusers: enlarge the natural light cone of the floolight.$ $Glass refractors: create blaes of light (with spot cones) or vertical or horizontal ellipses (with floo cones) in certain angles. Accessoryframe Mounte externally on prouct frame.$

7 esign Mario Cucinella LOODLIGHT Possible installation of accessories ymmetrical optics Asymmetrical optics pill ring Mounte insie the boy of the fitting. Reuces irect glare from lamp in certain angles. AL AT Prismatic glass iffuser for LED an refractor Mounte insie the boy of the fitting. Glass iffusers: enlarge the natural light cone of the floolight. Glass refractors: create blaes of light (with spot cones) or vertical or horizontal ellipses (with floo cones) in certain angles. Accessoryframe Mounte externally on prouct frame. Installation of coloure filters only with frame Can house max. two flat accessories at the same time (i.e. chromatic filter+refractor). Cylinrical screen Mounte externally with accessoryframe. Ensures better focusing an efinition of light cone an reuces stray light. 360 screening of light beam. Iniviual flap Mounte externally with accessoryframe. Reuces ispersion of light flux in four irections inepenently. Installation of max. four flaps at the same time. Protection gri Glass protection against vanalism (IK09). Lamellar louvre Mounte externally on prouct frame. or AL optic: Reuces glare in front of floolight an stray light on wall. or AT optic: Reuces glares on the sies of floolight. Visor Mounte externally on prouct frame. Reuces ispersion of light flux in three fixe irections. Rotation by 90 steps Lshape bracket for cornices Allows for installing the floolight in ownlight position when applie on horizontal surfaces (i.e. cornices). Picket an strap Picket for groun application an strap for application on branches (small boy only). Prismatic glass Protection gri Coloure filters Glass refractor Cylinrical screen Visor pillring Glass iffuser Accessoryframe Lamellar louver Directional flaps 82

E N E R G Y esign Mario Cucinella LOODLIGHT A V N I G implifie aiming with grauate scale Retention cable for frame Relamping without removing the accessories Removable plate with captive screws an li

sizes) Class II, with provisions for Class I (on request) with terminal for through earthing wire Luminaire with irect emission for metal halie, soium vapour, halogen an power LED with neutral white

Installation in groun an on brackets, for small boy, with optional picket an strap. Available in three sizes with large, meium an small boy.

Optical assembly an front frame mae of iecast aluminium alloy, with acrylic liqui paint (grey) or texturize liqui paint (white) with high resistance to atmospheric agents an UV rays; harene

Circular an asymmetrical longituinal reflectors mae of 99.93% superpure aluminium subjecte to anoic oxiation process an polishing. Asymmetrical transversal reflector mae of 99.

Componentholing box compose of control gear fitte on removable plate an fastcoupling terminals; back li mae of painte aluminium alloy fixe with four M5 stainless steel captive screws an galvanize

3pole terminal block with fastcoupling system for electrical connection; versions with ouble insulation provie with safety box for terminal block. Double cable entrance with M24x1.

8 E N E R G Y esign Mario Cucinella LOODLIGHT A V N I G implifie aiming with grauate scale Retention cable for frame Relamping without removing the accessories Removable plate with captive screws an li retention cable implifie maintenance an accessory installation with a single tool uitable for Decostar 51 E (Osram) an Masterline E (Philips) Energy aver Passthrough cable (ouble cable clamp in all sizes) Class II, with provisions for Class I (on request) with terminal for through earthing wire Luminaire with irect emission for metal halie, soium vapour, halogen an power LED with neutral white (4200K) an warm white (3100K) colour temperature. Wall/floor installation an ceiling installation with bracket (with fisher). Installation in groun an on brackets, for small boy, with optional picket an strap. Available in three sizes with large, meium an small boy. The fitting is compose of optical assembly / componentholing box an ajustable bracket. Optical assembly an front frame mae of iecast aluminium alloy, with acrylic liqui paint (grey) or texturize liqui paint (white) with high resistance to atmospheric agents an UV rays; harene transparent soiumcalcium safety glass, 5mm thick, silicone to frame. The frame is fitte to the optical assembly with two M5 captive screws an galvanize steel retention cable. Circular an asymmetrical longituinal reflectors mae of 99.93% superpure aluminium subjecte to anoic oxiation process an polishing. Asymmetrical transversal reflector mae of 99.85% superpure aluminium subjecte to anoic oxiation process. Optical assembly for LED versions compose of circuit complete with 16 (meium boy) an 9 (small boy) LEDs an plastic lenses. Componentholing box compose of control gear fitte on removable plate an fastcoupling terminals; back li mae of painte aluminium alloy fixe with four M5 stainless steel captive screws an galvanize steel retention cable. Electromagnetic (insulation class I) an electronic (insulation class II) control gears; LED versions with Vin V builtin transformer. 3pole terminal block with fastcoupling system for electrical connection; versions with ouble insulation provie with safety box for terminal block. Double cable entrance with M24x1.5 cable clamps ø 7 16 mm power supply cable (large an meium boy) an nickelplate brass PG11 ø 6,5 11 mm power supply cable (small boy) for through wiring. Extrue aluminium bracket with silkscreene grauate scale on both sies (easy aiming). Internal silicone watertight gaskets. Various accessories available: spillring, lamellar louvre for AT an AL optic, visors, flaps, cylinrical screen, glass refractors, glass iffusers an coloure filters with possible application in pairs. All screws are A2 stainless steel. The technical characteristics of the fitting comply with EN stanar. IP66 IK07 (IK 09 with protection gri) seal IMQENEC approval Class of InsulationII (Class I on eman) for electronic versions Class of InsulationI for electromagnetic versions 83

9 esign Mario Cucinella LOODLIGHT small boy luminaires control gear coe optic lamp BD32* 20 W HIT (CDMTm) (PGJ5) BD33* 20 W HIT (CDMTm) (PGJ5) BD34 9x1 W LED neutral white electronic class II BD35 BD36 9x1 W LED warm white 9x1 W LED neutral white BD37 9x1 W LED warm white BD38** W 12 V QRCBC 51 On eman PAR 20 version (max 50W), Osram Halopar 20 an ylvania Hipot 63 *Mini Mastercolour CDMTm Philips lamp **Dicroica Decostar 51 E (Osram) or Masterline E (Philips) meium boy luminaires control gear coe optic lamp BD40 electronic class II BD41 BD42 M BD43 AL AL electromagnetic class I BD44 BD45 M BD46 16x1 W LED neutral white electronic class II BD47 BD48 16x1 W LED warm white 16x1 W LED neutral white BD49 16x1 W LED warm white On eman PAR 30 version (Max 100W) an TCTEL (18W) large boy luminaires control gear coe optic lamp BD52 electronic class II BD53 BD54 * 200 BD55** AT AT 70 W HITDE (Rx7) BD56 AL AL BD57 BD58 * electromagnetic class I BD W HIT (G12) BD61 * 150 W HIT (G12) BD62 * The loo optic becomes Meium with HCIT Powerball (Osram). ** To be use exclusively with light sources with ceramic burner. AT AT 150 W HIT/HTDE (RX7) Optics pot () uper pot () Meium (M) loo () Wie loo (W) Asymmetrical longituinal (AL) Asymmetrical transversal (AT) 84

10 esign Mario Cucinella LOODLIGHT accessories Accessoryframe Colours 0115 small boy meium boy large boy external accessories an installation system small boy meium boy large boy BZ49 BZ63 BZ77 Protection gri BZ56* BZ71* BZ85* Coloure filters Colours BZ50* BZ64* BZ78* Cylinrical screen Colours 4774 BZ57* for BD32BD38 BZ72* for BD40BD41 BD44 BZ86* for BD52BD53 BD57BD59 Glass iffuser Colour 65 BZ51* BZ65* no for LED versions no for LED versions BZ79* Iniviual flap BZ58* BZ73* BZ87* Prismatic glass iffuser for LED versions Colour 24 BZ52* for BD34BD35 BD36BD37 BZ66* for BD46BD47 BD48BD49 Visor BZ59 BZ74 BZ88 Refractor for elliptical istribution Colour 24 BZ53* BZ67* BZ80* Lamellar louvers for asymmetrical transversal optic BZ89 for BD55BD62 pill ring for optic super spot/spot BZ54 for BD32 BZ68 for BD40BD41 BD44 BZ81 for BD52BD53 BD57BD59 Lamellar louvers for asymmetrical longituinal optic BZ75 for BD43 BZ90 for BD56 pill ring for meium/floo optic BZ55 for BD33 BZ69 for BD42 BD45 BZ82 for BD54BD58 BD61 pike for groun application Colour 00 BZ60 pill ring for asymmetrical longituinal optic BZ70 for BD43 BZ83 for BD56 trap for attaching to branches ection= mm Colour 00 BZ61 pill ring for asymmetrical transversal optic BZ84 for BD55BD62 Lshape bracket for cornices Colour 15 (colour 01 on request) BZ62 BZ76 BZ91 * Installe with accessoryframe Possible combinations for installation of accessories large meium small accessories installation permitte power 20 W CDMTm 50 W QRCBC 51 9x1 W LED 35 W HIT 16x1 W LED 70 W HIT 150 W HIT 150 W HIT/HTDE optic /M//W //M/AL coloure filter on accessoryholing frame glass iffuser/refractor insie the boy on accessoryholing frame spill ring insie the boy spill ring + coloure filter coloure filter on accessoryholing frame coloure filter + glass iffuser/refractor on accessoryholing frame / / / // AT/AL * * AT installation not permitte * To be use exclusively with light sources with ceramic burner 85

MaxiWoody. Features. The combination of filters allows the lamp color features to be changed, to make the most of the objects lit or the space.

MaxiWoody. Features. The combination of filters allows the lamp color features to be changed, to make the most of the objects lit or the space. design Mario Cucinella Features 03 IP67 IK08 Direct light luminaire for use with metal halide, sodium vapour, and LEDs. The fixture is installed into the ground, wall-mounted (with a fisher). The fixture