Order from Logan Actuator Co. - (815) PLAIN BACK Part Number See page 193
|
|
- Tobias Willis
- 6 years ago
- Views:
Transcription
1 Collet s BISON 5C High Spee Collet s Type Mini High Spee " 8000 RPM Forge Steel Boy 4" meter Type 3911 Universal " Forge Steel Boy meter PLAIN BACK PLAIN BACK See page an Threae IRECT MOUNT See page 194 Type C Threae " Forge Steel Boy Threae nose 2-3/16-10 Aapters: A, 1, L, IN, an Threae meter PLAIN BACK See page 194 Type 3960 SET-TRU " Forge Steel Boy Aapters: A, 1, L, IN, an Threae meter FLAT BACK See page 195 Type 3975 TRU Length " Forge Steel Boy Aapters: A, 1, L, IN, an Threae meter PLAIN BACK See page COLLET CHUCKS Toolmex Customer Service
2 Collet s BISON Mini High Spee Plain Back 5C Collet s with 4" O.., 8000 RPM, " T.I.R. High quality forge steel boy esigne for use with all 5C collets 3 pinion esign Can be use for turning, facing, boring, grining, an milling operations on center lathes an grining machines The simple key operate scroll provies a uniform, istortion free clamping of work pieces an low collet exchange times Their simple esign, rugge construction, an fine workmanship assures high quality an long service life Scroll is fully harene an groun for longer life Pinions are harene an groun Each chuck is balance within fine limits Stanar Accessories: 1 wrench 2 Sets of mounting bolts (front an back) 1 Hex key Aapter plates for an Threae spinles as well as 5C ajustable collet stop for the 5C collet chuck are available Type Spare s 5C Collet Capacity 4" Plain Back 3/64 x 1-1/8 7.0 Scroll Pinion Front Bolt Back Bolt Hex Key Collet Sets Finishe Aapter Plates for Threae an 1 Lathe Spinles Emergency Collets Collet Sets 18 piece 1/16-1-1/8 by 16ths piece 1/16-1-1/8 by 32ns piece 1/16-1-1/8 by 64ths piece 3mm - 26mm by 1mm Ajustable 5C Collet Stop : " Spinle 1" /8" 12W /2" escription 1/16 Steel Universal 5 Pc 5C Collet Stop : Quality Proucts nership Inustry Experts COLLET CHUCKS 193
3 Collet s BISON 5C Collet s for with Aapter Plates 6000 RPM, " T.I.R. High quality forge steel boy esigne for use with all 5C collets For turning, facing, boring, grining an milling operations on center lathes an grining machines The simple key operate scroll provies a uniform, istortion free clamping of work pieces an low collet exchange times Their simple esign, rugge construction, an fine workmanship assures high quality an long service life Scroll is fully harene an groun for longer life Pinions are harene an groun Stanar Accessories: 1 wrench 1 Set of mounting bolts 1 Hex key Aapter plates for A,, IN, Threae an NST50 spinles as well as 5C ajustable collet stop for the 5C collet chuck are available Universal Type 3911 TRU Length Type 3975 Threae Type C Spare s Sol by the piece Type 5C Collet Holing Capacity inches Plain Back C 3/64 to 1-1/ /2" x /4" x 8 irect Mount C C with Threae Nose 2-3/16 x 10 3/64 to 1-1/ Plain Back C 3/64 to 1-1/ Shouler Length Stop TRU-LENGTH Plain Back C 3/64 to 1-1/8 13 Machine* Aapters for A,, IN, an Threae Lathe Spinles Taper A A A L C-2 / IN M39 x /16-10 * See page 47 for mounting instructions Scroll Pinion Bolts Semi-machine Aapters for Threae Lathe Spinles Spinle x /2 x Rough 194 COLLET CHUCKS Toolmex Customer Service
4 Collet s BISON Super Precision 5C SET TRU Collet s with Fine Ajustment for with Aapter Plates, 6000 RPM, " T.I.R. High quality forge steel boy esigne for use with all 5C collets Can be use for turning, facing, boring, grining an milling operations on center lathes an grining machines The simple key operate scroll provies a uniform, istortion free clamping of work pieces an low collet exchange times Four fine ajustment screws are use to set up the chuck on its mounting plate to get precision within " T.I.R. on uplicate parts Scroll is fully harene an groun for longer life Pinions are harene an groun Stanar Accessories: 1 wrench 1 Set of mounting bolts 1 Hex key mounting plates (aapters) A5, 3, 4, 5, Threae an IN are available 5C Collets : Type C 5C Collet Holing Capacity inches RPM /64 x 1-1/ BISON Fully Machine Steel Aapters for A,, IN an Threae Lathe Spinles BISON Spare s Sol by the piece Taper A A A L /2 x /16 x /4 x Quality Proucts nership Inustry Experts Scroll Pinion Fine Ajustment Screws Bolts Ajustable 5C Collet Stop : Universal 5 Pc 5C Collet Stop : COLLET CHUCKS 195
5 Collet s 16C COLLET CHUCKS BISON 16C Plain Back an SET-TRU Collet s Steel Boy T.I.R " TRU-Length No Workpiece Movement SET-TRU Type " Plain Back 16C Collet Holing Capacity RPM /16-1-5/ SET-TRU 24.0 BISON Aapters for A,, C, L, an Threae Lathe Spinles BISON Spare s * Note: All SET-TRU backplates are fully finishe 6-1/4" Taper SET-TRU * Plain Back Finishe Semi-finishe A A L L C-4 / IN C-5 / IN C-6 / IN /2" /16" - 10 (Haringe) /4" Sol by the piece 6" Pinion Scroll Fine Ajustment Screws Collet Bolts Plain Back SET-TRU COLLET CHUCKS Toolmex Customer Service
6 Collet s BISON Fully Machine Aapters for 3 an SET-TRU s Type 8288 L H E M N max 4" * /4" * 4" soli jaws only Aapters an SET-TRU chucks are sol separately COLLET CHUCK AAPTERS BISON MT Aapters for 4 meter s MT Aapter MT Shank 4" Type BISON 5C Aapters for Quick Clamping s, Fully Machine 5C an MT Aapters are esigne for use with BISON 3 an 6 Jaw Quick Clamping Lathe s Mae of high quality forge steel, harene an precision groun for maximum accuracy Wie clamping range an high accuracy makes them very useful in many precision rilling, turning, grining an milling operations BISON Quick Clamping s give accuracy not available with stanar an precision 5C collets Type " L H Thru Hole F E " /4" BISON MT Aapters for Quick Clamping s, Fully Machine 3" an 4" meters: 0.001" T.I.R. an 6" meters: " T.I.R. Aapters an SET-TRU chucks are sol separately MT No. 3 4 Type 8283 L H F E 4" " " Quality Proucts nership Inustry Experts COLLET CHUCKS 197
7 Collet s COLLET CHUCK AAPTERS BISON Semi-Finishe 5C Aapters for Lathe s 5C Aapters are esigne for use with self-centering or inepenent lathe chucks Mae of high quality forge steel 5C shank is harene an precision groun for maximum accuracy Soft flange Wie clamping range an high accuracy makes them very useful in many precision rilling, turning, grining an milling operations Bison s an 5C Aapters give accuracy not available with stanar an precision 5C collets Shank Flange Type C 4" Hole L Threa 3" an 4" Lathe s 3 an 4-Jaw Scroll Jaw Inepenent C x 20 an 6" " " BISON Principal imensions for s with 5C Aapters 5C Soft Blank Aapters 4-Jaw Inepenent Scroll s Back an Front Total Length: 4.41" Flange meter: 4" an Flange Thickness: 1" Hole meter:.866" 4-Jaw Inepenent s E F C H h1 M 3" / / " /8-16 Scroll s F E C H h1 M G 3" M6 M6 4" M8 M M8 M8 6" M10 M COLLET CHUCKS Toolmex Customer Service
New Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationMACHINE TOOL ACCESSORIES
5c expanding collets series 2: MACHINE SHOP DISCOUNT SUPPLY THREEJaw SELFCENTERING universal LATHE s SERIES 995: Reversible 2 piece jaws except where noted 5c expanding collet SETS 4 Piece Set allows internal
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
5C EXPANDING COLLETS SERIES 2: Tel: 205884 / Fax: 20597 50 Huyler St / So. Hackensack, NJ 070 USA THREEJAW SELFCENTERING UNIVERSAL LATHE CHUCKS SERIES 995: Reversible 2 piece jaws except where noted 5C
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationSPINDLE ADAPTER SELECTION GUIDE
CHUCK JAWS RETENTION KNOS SPINDLE ADAPTER SELECTION GUIDE DETERMINING SPINDLE TYPE & SIZE Type A1 and A2 s with A2 mounts can be installed on either A1 or A2 spindle nose. Camlock Type D1 Nose Type A1
More information1.3. Face Drivers. for Grinding. FFBR with Flange Retainer. FBSR with Taper Shank Retainer FFB/ FFBH. Changeable Parts
1.3 Face Drivers for Grining FFBR with Flange Retainer FBSR with Taper Shank Retainer FFB/ FFBH Changeable Parts Special Face Drivers FBSR PN / FFPR / FBS NEIDLEIN-SPNNZEUGE GmbH. Erlenbrunnenstraße 3.
More informationMACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationP R O D U C T C A T A L O G.buckchuck.com www
P R O D U C T C A T A L O G www.buckchuck.com If a chuck s a chuck, then Why a Buck! Depth. In Experience. In Heritage. In Product. How about 75 years? That s how long Buck Chuck Company has engineered
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationBUCK PRODUCT CATALOG
PRODUCT CATALOG Table of Contents Technical Information. Why a BUCK?...3 Manual Chuck Selection...5 Spindle Identification for Mounting Plates...6 Obsolete Chuck Crossover...7 Parts Breakdown...8 ATSC
More informationClamping Tools
Clamping Tools 800-544-8436 www.guho.com Universal CNC Boring Chuck 21030 - Series 80 AB* No. A D For Weeke, Maka, Reichenbacher, etc. SK 30 1 90 50 1-13 21030-0-13002-0 For Biesse up from 9/92, Masterwoo
More informationChuck. Weight (lbs) Model Style. 3 Jaw Chuck 6 Jaw Chuck. Price Each. Weight (lbs) Max. RPM
MANUAL SROLL HUKS Ajust Tru Style MODEL ATS BUK HUK is continuously striving to make its products better so that your production can be more efficient! Buck has engineered and built some of the finest
More informationENGLISH VERSION TAPPING ATTACHMENTS TAP CHUCKS MARKING HEADS
ENGLISH VERSION TAPPING ATTACHMENTS TAP CHUCKS MARKING HEAS 1 Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments
More informationPOWER CHUCKS. 3-Jaw Large Thru Hole 3-Jaw Extra Large Thru Hole 3-Jaw Closed Center
3-Jaw Large Thru Hole 3-Jaw Extra Large Thru Hole 3-Jaw Closed Center TMX Power s DESIGNED AND ENGINEERED FOR PRECISION Featuring the quality and precision associated with European manufacturing, TMX Power
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationRCT. RDT Tapping Attachments
RCT. RDT Tapping Attachments Threa prouction on machining centers with constant spee tapping CST Constant Spee Tapping relies on a compact tapping attachment to provie tap reversal. The machine spinle
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationCT40 SD-16 80mm. BT40 SD-16 90mm. HM 32mm 4 CAT40. HM 32mm 105 BT40
S Collet & HM Milling Chuck Contents BT...S S Collet High Accuracy Chucks 52 CT...S HSK...S HM HM Milling Chucks 53 Section Contents 50 S Collet Chuck Measurement System Interface Collet Type Gage ength
More informationHigh RPM,Waterproof type. High RPM,Waterproof type. Standard type. Oil seal type. Standard type,carbide tip. Slide back type.
F SP High RP,Waterproof type F TP High RP,Waterproof type S Stanar type WP type S Stanar type,carbie tip H Slie back type 7 Heavy uty type S evel type 9 10 SH1/SH12 Slener chuck 11 ー 12 NKNE IVE ENTER
More informationR8 Tool Holders MADE IN EUROPE
R8 Tool Holders MADE IN EUROPE TMX R8 HOLDERS AND KNEE MILLS the perfect pairing of reliability and tradition Image courtesy of the Hardinge Group Though developed in 1936, the knee mill has made a recent
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More information15L Slant-PRO TM CNC LATHE
15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationLeitz-Lexicon. Edition 6
Leitz-Lexicon Eition 6 Explanation of abbreviations a e a p PL PT L M S b B B BEM BH CNC = imension = cutting thickness (raial) = cutting epth (axial) = imension = panel raising length = panel raising
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationHardinge. The Hardinge Advantage. Hardinge Inc. One Hardinge Drive Elmira, NY USA. Worldwide Leader in Super-Precision
The Hardinge Advantage Worldwide Leader in Super-Precision Hardinge Inc. One Hardinge Drive Elmira, NY 14902-1507 USA Phone: 800-843-8801 Fax: 607-734-3886 Internet: www.hardinge.com Hardinge Inc., 1997
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationMachining Processes Turning
Machining Review Questions - Page 2 Machining Processes Turning 1. Identify the cutting parameters (speed, feed and depth of cut) for the turning process. 2. Identify the basic parts of the lathe machine
More informationATLANTIC JIG BORER MODEL 4000
ATLANTIC JIG BORER MODEL 4000 THE MACHINE BUILT TO DO TOMORROW'S WORK TODAY! ATLANTIC JIG BORER MODEL 4000 No single feature makes one jig-borer better than another... it takes the proper balance of engineering,
More informationSAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500
SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationModel No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationWORKHOLDING TECHNOLOGIES
ITC WORKHOLDING TECHNOLOGIES Expanding Mandrels and Collet Chucks INDUSTRIAL TOOLS CORPORATION n 54/14, D-II, M.I.D.C., Chinchwad, Pune - 411 019. Tel.: 020-7474394, 7470844 n 302, Vicky Apartment, P.
More informationClamping systems. Leitz Lexicon Edition 7
Clamping systems Leitz Lexicon Eition 7 Explanation of abbreviations a e a p BM PL PT L M S b B B BEM BH CNC = imension = cutting thickness (raial) = cutting epth (axial) = imension = panel raising length
More informationComplete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationCNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
More informationGrooving & Sizing. Chamfering. Tooling for CNC machines, includes solutions for both basic and advanced applications.
Tooling for machines, inclues solutions for both basic an avance applications. All tools are prouce from high quality steel. High quality carbie, aaptable graes to suit cutting requirements. namictm soli
More informationGrinding wheel adapters and Accessories
Grining wheel aapters an Accessories goo better BLUE Grining wheel aapter an accessories Precision grining requirean optimal spinle an flawless grining wheel, both of which epen on perfect grining wheeel
More informationSPINDLE TOOLING FOR MANUAL & CNC LATHES
SPINDLE TOOLING FOR MANUAL & CNC LATHES TURNING MILLING GRINDING WORKHOLDING Pioneers of Spindle Tooling Quality and Process Control Value in Workholding Team up with the Hardinge Workholding Group to
More informationDimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationInTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationselection of our most popular products complete range visit empowered by precision bison originals
THeBeST BeST OFOF 2018 THe THeOF BeST2018 2017 A selection of our most popular products selection of our most popular products A selection of our Amost popular products THe BeST OF 2017 A selection of
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationHandle Hardware Kit for Router Plane 05P38.10
Handle Hardware Kit for Router Plane 05P38.10 Introduction With this kit, you can make a set of replacement handles for the Veritas Router Plane. The following instructions describe how to make one handle
More informationManually Operated Collet Chucks HSPF with Safety Key. Top-Grip Through Hole and Back Stop Chucks GT
Workpiece Clamping, Tapping Attachments, uick Change Chucks Collets for Workpiece Clamping Page 4 Dead Length Collets DL Page 6 Emergency Dead Length Collets DL-V Page 7 Inner Stops for Dead Length Collets
More informationHARDINGE Spindle Tooling for Manual and CNC Lathes
www.hardinge.com HARDINGE Spindle Tooling for Manual and CNC Lathes Pioneers of Spindle Tooling Value in Workholding Team up with Hardinge to add value to your material-cutting processes and assembly operations.
More informationTaig Lathe Instruction Booklet 03J71.00
Page 1 of 12 Taig Lathe Instruction Booklet 03J71.00 1. Specifications Center Height: 2.250" Distance Between Centers: 9.75" Recommended Motor: 1/6 to 1/4 hp, 1725 rpm, 1/2" arbor Accuracy:?.001" Spindle:
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationHOW TO ORDER REPAIR PARTS
HOW TO ORDER REPAIR PARTS Should you need repair parts for your lathe the following information is necessary to fill your order promptly and correctly. 1. Complete name and number of the part as listed
More informationCATALOGUE ROUTER BITS P 01
CATALOGUE P 01 1 Summary ECO-LINE NEW-Mini =1+1 router bit P HW - HWM P ECO-LINE p. 3 WHOLE TIPS p. 6 STRAIGHT CUTTING EGE TOOLS p. 21 HELICAL TOOLS p. 22 CHUCKS p. 31 ACCESSORIES p. 39 HP-LINE p. 8 HELICAL
More informationClamping systems. Leitz Lexicon Edition 7
Clamping systems Leitz Lexicon Eition 7 Explanation of abbreviations a e a p BM PL PT L M S b B B BEM BH CNC = imension = cutting thickness (raial) = cutting epth (axial) = imension = panel raising length
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationWOOD DRILL BITS WOOD WORKING WITH PROFESSIONAL TOOLS HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
WOO RILL WOO WORKING WITH PROFESSIONAL TOOLS WOO RILL METAL RILL RILL 184 Wood twist drill bit TURBOWOO 119 120 180 280 Wood twist drill bit 121 122 186 HSS wood twist drill bit 123 187 Wood twist drill
More informationCOLLET FIXTURES, CHUCKS AND COLLETS FOR MACHINING CENTERS ROTARY TABLES MANUAL LATHES GRINDERS
OLLET FIXTURES, HUKS N OLLETS FOR MHINING ENTERS ROTRY TLES MNUL LTHES GRINERS ROYL QUIK-GRIP POWER-LOK HYRULI OLLET FIXTURES Extremely Fast ollet hanges hanging collets on a Royal Quick-Grip Power-lock
More informationSpecifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)
Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationSURE-GRIP EXPANDING COLLET SYSTEMS
SURE-GRIP EXPNDING COLLET SYSTEMS Turning Milling Grinding Workholding The Hardinge ID Gripping dvantage Years of experience in manufacturing standard expanding collets and special expanding systems brings
More informationDrilling. Leitz Lexicon Edition 7
rilling eitz exicon Eition 7 Explanation of abbreviations A a e a p ABM AP APT A AM A b B B BEM BH BO CNC = imension A = cutting thickness (raial) = cutting epth (axial) = imension = panel raising length
More informationChuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories
Chuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories Chuck adapters DIN 55026/ISO-A 702/1 Mounting adapters on short taper spindle noses direct and indirect mounting reduction
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationUniversal CNC Boring Chuck
Universal CNC Boring Chuck B* No. For Weeke, Maka, Reichenbacher, etc. SK 90 0 3 00 For Biesse up from 9/92, Masterwoo (HSmotors) SK 4 90 0 3 0024 For lberti, Masterwoo (Colombomotors) SK 90 0 For Morbielli,
More informationLathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
More informationN/C LATHE TOOLING F F
ATHE TOOING ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes
More informationA B C D E F G H REVISIONS NOTES: KP PRESS-FIT INSTALLATIONS ARE SHOWN UNLESS OTHERWISE SPECIFIED.
A B C E F G H ISIONS NOTES: ESCRIPTION BY. THIS OCUMENT CONTROLS INSTALLATION OF INFOCHIP URAPLUG 9. UHF RFI TAG PROUCTS IN THE FOLLOWING PRESS-FIT INSTALLATION TYPES: "NEAR-FLUSH" AN "RECESSE". AHESIVE
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationPrecision & Heavy Duty Machining
High Speed Precision Lathes Large capacity, Powerful, Universal & Precision ATRUMP 18, 21 and 25" Series Lathes have just the right amount of engineering to afford simplicity of operation, coupled with
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More informationINSTALLATION OF WELLS SUPER QUICK CHUCK LEFT HAND ON BALDOR LATHE
DENTAL, INC. TECHNICAL BULLETIN Q832-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationSHOWA TOOL. GENERAL CATALOG SHOWA TOOL
SHOWA TOOL SHOWA TOOL GENERAL CATALOG www.showatool.com SHOWA TOOL SH INDEX A AS B ADJUST SCREW for MICRON CHUCK H series, M series BC SPARE BLADE CLAMP 67 BK BLADE (For Standard Head) 60 BKF BLADE (For
More informationDrawbars for Milling Machines
Machine Tool & Drawbars for Milling Machines Made in USA Drawbars from low carbon steel, soft and black oxide plated. Drawbars are manufactured from two parts the shaft and the hex. Drawbars for Milling
More informationAward recommendations highlighted in yellow. Rapid City, SD Quote # Quantity Description of Item Tormach Inc. $48,870.00
Tormach 15L Slant-Pro Deluxe Education Package shall be as follows, and shall include: 1 3 Tormach 15L Slant-Pro CNC Lathe: - 15 Swing over bed diameter - 3HP Spindle - 1.53 Spindle Bore 8-Station Turret
More informationHorological Milling Machine Bushing and Depthing Accessory
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Horological Milling Machine Bushing and Depthing Accessory P/N 2118 Overview When a non-jeweled clock or watch
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationA STANDARD THERMOWELL. length from 50mm to 1505mm PN 6, 25, 40
STANAR THERMOWE length from 50mm to 1505mm PN 6, 25, 40 ESCRIPTION: materials: steel, brass, copper, stainless steel an other metals, other surface finish available attachment threa -inner, outer process
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More informationXINYU MACHINERY CO.,LTD.
ITEM BL1224 BL1237 Swing Over Bed mm φ305 φ305 Swing Over Carriage mm φ173 φ173 Swing Over Gap mm φ440 φ440 Width of bed-way mm 182 182 Distance Between Centers mm 530 940 Spindle taper M.T.5 M.T.5 Spindle
More informationTolerance exceeds Industry Standards Hardened for maximum longevity
NEW! NEW! BRT Pull Studs Material is 20CrNiMo Certified Finish is 32 Micro or better Tolerance exceeds Industry Standards Hardened for maximum longevity See pages 17 & 18 for a complete listing of all
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationHARDINGE Collet Chuck Systems
HARINGE Collet Chuck Systems WORKHOING www.shophardinge.com 1 WHY BUY A HARINGE FEXC QUICK CHANGE COET SYSTEM? 10X the grip range of standard collets +/-.020 2X as accurate (.0004 TIR) Up to 19X faster
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More information