Lutera individual lighting accents from the ground. Accentuating: Flexible: Carefree: Efficient: Large selection:

Transcription

1 Lutera individual lighting accents from the ground. The Lutera ground-recessed spotlight sets architecture in-scene with striking light accents, and can be flexible thanks to two construction sizes and various equipment options. Accentuating: functional and aesthetic lighting design for buildings and objects. Flexible: pivotable optics with various light distribution characteristics allow a wide design flexibility with maximum diversity of effects. Carefree: proven, robust technology for secure recessing where demands are high and confident operation over many years. Efficient: economic with low current consumption, and low maintenance with a long service life. Large selection: a diversity of light sources and modular series design for greater planning flexibility.

2 Electrical connection Electrical connection is via a cable routed externally. To ensure effective and permanent protection against humidity, the cable connection is cast within the luminaire. Flexible photometrics Making architecture visible in the dark means being able to flexibly design with regard to photometrics. Five different light beam characteristics allow a high degree of flexibility and offer the basis for successful design with light. Pivotable optical systems with rotationally symmetrical light intensity distribution underline the flexibility of Lutera. ip68 Lutera features a tough die-cast aluminium housing and a cover of hardened glass. Use of such high quality materials paired with an outstanding sealing system fulfills the high demands for a ground-recessed spotlight, and ensures full operation over many years.

3 Lutera 200 Ground-recessed spotlight 6 a IP RES/LED-W PR 8521RMS/ PR 8521RB/ PR Lutera 200 ground-recessed spotlight for accent lighting. Spotlight housing and cover ring of die-cast aluminium, colour deep black, similar to RAL Cover ring with fastening screws and threaded inserts of stainless steel, permanently fixed. For pressure loads up to 2,000 kg, driveover capacity at walking pace. In areas with stress loads from accelerating, braking and turning movements of vehicles, ground recessed spotlights must not be used. On-site, a foundation corresponding to the load with suitable drainage must be ensured. Cover of 15 mm thick, hardened glass. Mounting housing of weather-resistant PVC tubing with luminaire mounting ring of glass-fibre-reinforced PA6, please order separately as an accessory. Electrical connection Spotlight wired ready for connection with cable routed outwards, 3 x 1.5 mm². Inner connection housing sealed with epoxy resin. Electrical version E With electronic control gear. ET With electronic transformer. K With inductive ballast, parallel-compensated. Decorative cover plate made of stainless steel, circular and square, to be ordered separately. LED unit with 12 x 1 W LED in white, blue, green or red, with rotationally symmetrical narrow luminous intensity distribution ( RES ), can be steplessly swivelled through ± 15. Optical systems for high pressure discharge lamps and compact fluorescent lamps of anodised aluminium. RES Rotationally symmetrical narrowangle light distribution, pivotable through ±10 in 5 steps. RMS Rotationally symmetrical mediumwide-angle light distribution, pivotable through ±15 in 5 steps. RBS Rotationally symmetrical wide-angle light distribution, pivotable through ±15 in 5 steps. RB Rotationally symmetrical wide-angle light distribution. AM Asymmetrical medium-wide-angle light distribution.

4 Lamp data AM/ PQ 8521RES/LED-W PQ 8521RMS/ PQ DesignationTOC Electrical version Lamps Power Socket Surface kg consumption temperature Lutera 200 E ET K W C with rotationally symmetrical narrow luminous intensity distribution, pivotable (RES) 8521RES/20hiT x HIT-CRI 20 G8, RES/35hiT x HIT-CRI 35 G RES/70hiT x HIT-CRI 70 G RES/LED-B x LED, blue 18 W RES/LED-G x LED, green 18 W RES/LED-R x LED, red 18 W RES/LED-W x LED, white, nw 18 W with rotationally symmetrical medium-wide luminous intensity distribution, pivotable (RMS) 8521RMS/35hiT x HIT-CRI 35 G RMS/70hiT x HIT-CRI 70 G with rotationally symmetrical wide luminous intensity distribution, pivotable (RBS) 8521RBS/70hST-DE x HST-DE 70 RX7s with rotationally symmetrical wide luminous intensity distribution (RB) 8521RB/TCT26/ x TC-TEL 26/32 GX 24q with asymmetrical medium-wide luminous intensity distribution (AM) 8521AM/35hiT x HIT-CRI 35 G AM/70hiT x HIT-CRI 70 G AccessoriesTOC Description kg 08520ET Mounting housing PR Stainless steel cover plate, circular PQ Stainless steel cover plate, square TG Temperature protection grid GR Cover glass, anti-slip F-red Colour filter, red F-yellow Colour filter, yellow F-green Colour filter, green F-blue Colour filter, blue D Replacement gasket G Replacement glass PR 08520PQ TG

5 TRILUX säljs i Sverige genom: PROLJUS AB Kyrkogatan VRIGSTAD info@proljus.se Björn Celén bjorn.celen@proljus.se Johan Celén johan.celen@proljus.se