Website:- - S.No. Items Price
|
|
|
- Berniece Joseph
- 6 years ago
- Views:
Transcription
1 BT 100 ANAEROBIC CULTURE JAR, Stainless Steel BTL Type (Modified Mcintosh and Fildes pattern) Top Flange Recessed For A Torodial Rubber Sealing Ring & A Cover Held By A Strong Bridge Clamp. Cover Fitted With Two Needle Valves For Evacuation. Supplied With A Sachet Of Catalyst & Pressure Cum Vacuum Gauge Fitted On Top. Supplied Without Anaerobic Indicator. BT 150 ANAEROBIC CULTURE JAR Polycarbonate Jar of 3.5 Litre Cap Polycarbonate Jar with Aluminium Die Casted Lid Fitted with Pressure valve, vaccum Valve, saftey value & Compound Pressure Cum vaccum gauge, three Finger Clamp & sealing O Ring. This above is recommended only where inside air is removed through vaccum pump & Co2 is Fulled in jar thru cylinder to generate anaerobic condition. Also supplied with plain aluminium die casted lid which can be fitted when ready made Gas packs are used. Supplied with petri plate carrier for 10 petri dish. Anaerobic Indicator & Anaerobic Gas Pack Extra BT 150/1 Anaerobic Indicator (Box of 10 tablets) BT 150/2 Anaerobic Gas Pack (Packet of 5 Sachets) BT 001/1 COLONY COUNTER (Digital), 4 Digit LED Display (Max Make) BT 002/1 COLORIMETER DIGITAL (8 Filter) (Max Make) BT 125 COD DIGESTION APPARATUS (Digital Temp. Controlled) Provided with 15 sets of glass reaction vessels 200ml & air condensers. BT 003 WATER & SOIL ANALYSIS KIT DIGITAL (Portable) BT 003/1 Max Make, Seven Parameter BT 003/3 Max Make, Four Parameter BT 200 ELECTROPHORESIS SUBMARINE GEL (HORIZONTAL) Regular (Also called Horizontal electophoresis/ Agrose Gel/ PolyAcrylamide Gel Electrophoresis). Fixed with platinum electrode assembly. Contains perforated lid for vapors, gel trays 5x7cm. (2 nos.) 10x7cm. (1 nos.), 8 well comb 1.5mm (2 nos.), 3 well comb 3.0mm, (1 no.) comb stand connecting cord & instrument manual. BT 200/B MINI HORIZONTAL ELECTROPHORESIS (Jointless Moulded) BT 250 ELECTROPHORESIS APPARATUS (VERTICAL) Consists of detachable platinum electrode assembly (2 Nos.) Glass Plates Notched & Rectangular 1 set, Teflon Comb 7 wells 1mm (1 No.), Spacers 1mm (3Nos.) clamp with screw (1 set), gasket fixed, levelling screws. BT 250/B MINI VERTICAL ELECTROPHORESIS (Jointless Moulded) BT 260 PAPER STRIP ELECTROPHORESIS APPARATUS BT 260/1 Horizontal Model BT 260/2 Vertical Model BT 300 POWER SUPPLY for Electrophoresis (Digital) 0-300V,100mA This Power Supply Is Used With Every Model Of Electrophoresis Apparatus BT 300/B Electrophoresis Power Suppy (Digital) with Timer Serving Science & Education
2 BT 005/1 FLAME PHOTOMETER (Digital) Max Make BT 006 FLASK SHAKER (Wrist Action) Carries 100ml To 1000ml Flask (Variable Speed) BT 006/1 4 Flasks BT 006/2 8 Flasks BT 007 HEATING MANTLE Adarsh Make Capacity Wattage Spare Mantle Complete BT 007/1 100ml 60 (a) (h) BT 007/2 250ml 150 (b) (i) BT 007/3 500ml 200 (c) (j) BT 007/4 1000ml 300 (d) (k) BT 007/5 2000ml 450 (e) (l) BT 007/6 3000ml 450 (f) (m) BT 007/7 5000ml 600 (g) (n) BT 008 HOT PLATE 8 ROUND (Electric) BT 008/1 Regular Model, With 3 Stage Heat Control Switch BT 008/2 With Energy Regulator BT 009 HOT PLATE (Rectangular) BT 009/1 12 x BT 009/2 16 x BT 009/3 18 x BT 009/4 24 x BT 310 HUMIDIFIER (Cap. 3Ltr.) BT 350 HUMIDITY CABINET (Inner S.S) Temp 5 deg C above ambient to 6 deg C. Humidity 30-90% BT 350/1 Inside Chamber 455 x 455 x 455mm, Cap. 95 Ltr BT 350/2 Inside Chamber 455 x 455 x 710mm, Cap. 147 Ltr BT 350/3 Inside Chamber 605 x 605 x 605mm, Cap. 225 Ltr Optional:- BT 350/4 Hygrometer (Humidity Indicator) BT 350/5 Digital Temp. Controller-cum-Indicator BT 350/6 Automatic electronic controller with digital display for Temp. & Humidity combined BT 400 ENVIRONMENTAL CHAMBER HUMIDITY CABINET (5-50 Deg C) Humidity 20-95% BT 400/1 Inside Chamber 455 x 455 x 455mm, Cap. 95 Ltr BT 400/2 Inside Chamber 455 x 455 x 710mm, Cap. 147 Ltr BT 400/3 Inside Chamber 605 x 605 x 605mm, Cap. 225 Ltr Optional:- Accessories for above Same as BT Serving Science & Education
3 BT 010 INCUBATOR B.O.D. Inner Chamber Size Cap. Material BT 010/1 455 x 410 x 610 mm 4cu. Ft. or 112 Ltr. Al BT 010/2 455 x 410 x 610 mm 4cu. Ft. or 112 Ltr. S.S BT 010/3 505 x 451 x 830 mm 6cu. Ft. or 171 Ltr. Al BT 010/4 505 x 451 x 830 mm 6cu. Ft. or 171 Ltr. S.S BT 010/5 565 x 565 x 865 mm 10cu. Ft. or 280 Ltr. Al BT 010/6 565 x 565 x 865 mm 10cu. Ft. or 280 Ltr. S.S Optional :- BT 010/7 Timer 0-24 hours day night cycle BT 010/8 Internal illumination with 3 fluorescent tubes BT 010/9 Digital temp. Indicator-cum-Controller BT 010/10 Microprocessor PID digital temp. Indicator-cum-controller BT 430 JAR TEST APPARATUS (Floculator) With Analog Timer BT 430/1 2 Jar Test BT 430/2 4 Jar Test BT 430/3 6 Jar Test BT 430/4 Digital RPM Display Extra BT 430/5 Digital Timer Extra BT 011 KARL FISCHER TITRIMETER (Auto) Max Make BT 510 KJELDAHL DISTILLATION UNIT (without glass parts) BT 510/1 Set of 3 Mantles with One Regulator BT 510/2 Set of 6 Mantles with One Regulator BT 520 KJELDAHL DIGESTION UNIT (without glass parts) BT 520/1 Set of 3 Mantles with One Regulator BT 520/2 Set of 6 Mantles with One Regulator BT 012 LABORATORY STIRRER with Speed Regulator BT 014 MAGNETIC STIRRER WITH HOT PLATE BT 014/1 2Ltr BT 014/2 5 Ltr BT 550 MAGNETIC BEAD / ROTOR (CENTRE RING) BT 550/1 10mm Length BT 550/4 25mm Length BT 550/2 50mm Length BT 550/5 30mm Length BT 550/3 20mm Length BT 550/6 35mm Length Serving Science & Education
4 BT 015 MELTING POINT APPARATUS BT 015/1 Mechanical Type BT 015/2 Digital Type (Regular Quality) Precision Type BT 015/3 Microprocessor Controlled (Melting point reading HOLD on Facility) BT 015/4 Fully Automatic (Self Recording of Melting Point) Not Suitable for dark coloured samples BT 016 MOISTURE BALANCE (Infrared) BT 016/1 5gm or 10gm (Any One) BT 016/3 25gm BT 017 MUFFLE FURNACE (upto 900º C) Heating elements are made of high temperature kanthal wire. Operated by energy regulator. Inner Muffle Size in Inches & mm BT 017/1 9"x4"x4" (225x100x100mm) BT 017/2 10"x5"x5" (250x125x125mm) BT 017/30 12"x5"x5" (300x125x125mm) BT 017/3 12 x6 x6" (300x150x150mm) BT 017/4 14"x7"x5" (350x175x125mm) BT 017/9 Optional:- Digital Temperature indicator cum controller BT 600 MUFFLE FURNANCE (INDUSTRIAL) upto 1200ºC with Digital Temp. Controller Inner Muffle Size in Inches & mm BT 600/1 9"x4"x4" (225x100x100mm) BT 600/2 10"x5"x5" (250x125x125mm) BT 600/3 12 x6 x6" (300x150x150mm) BT 600/4 12"x8"x8" (300x200x200mm) BT 600/5 18"x9"x9" (450x225x225mm) BT 018 ORBITAL SHAKING INCUBATOR CUM- B.O.D. Incubator BT 018/1 Capacity 16x500ml. Temp. 5º above ambient to 60º C BT 018/2 Capacity 16x500ml. Temp. range 5ºC to 60º C with lighting arrangement BT 018/3 OPTIONAL: Digital Temp. Indicator cum Controller BT 019 ROTARY SHAKER (Platform Type) BT 019/1 25 Flasks of 100ml BT 019/2 25 Flasks of 250ml BT 019/3 15 Flasks of 250ml BT 020 SPECTROPHOTOMETER UV-VIS (Single Beam) BT 021/1 SPECTROPHOTOMETER DIGITAL (1nm Wavelength Resolution) Serving Science & Education 111
5 BT 022 THIN LAYER CHROMATOGRAPHY APPARATUS Consists of Spreader (Applicator) Perspex Base 114x23cm, Al. Drying Plate rack for ten 20x20cm plates, Spotting Template Perspex, 5 Glass Plate 20x20cm & 2 plates 20x5cm, pipette, Scriber, Glass Sprayer with rubber below & Developing Tank BT 022/1 TLC Kit with Brass Spreader BT 022/2 TLC Kit with Aluminium Spreader BT 022/3 Brass Spreader Spare BT 022/4 Aluminium Spreader Spare BT 022/5 TLC Glass Plate (All Sides Grounded) Size 20x10cm BT 022/6 TLC Glass Plate (All Sides Grounded) Size 20x5cm BT 023 TISSUE HOMOGENISER with Speed Regulator BT 024 TRANSILLUMINATORS BT 024/1 Six 360nm.U.V. Source BT 024/2 Six 312nm.U.V. Source BT 024/3 White/Ultra Voilet Transilluminator (Dual Model) BT 025 TURBIDITY METER (Max Make) BT 025/1 Max Make BT 025/2 E.I. Make BT 026 U.V. CHROMATOGRAPHY INSPECTION CABINET Fitted with two U.V. tubes of different wave lengths & a florescence tube for visible light. BT 027 WATER BATH (Thermostatic Double Walled) BT 027/1 6 Hole of 75mm Dia BT 027/2 12 Hole of 75mm Dia BT 027/10 6 Hole Single Walled BT 027/20 12 Hole Single Walled BT 027/3 Digital Temp. Indicator Cum Controller for Above BT 650 SEROLOGICAL WATER BATH Thermostatic Control, Inside Chamber S.S Double Walled BT 650/1 300 x 175 x 175mm (Suitable for 1 racks), 12 Ltr BT 650/2 300 x 250 x 175mm (Suitable for 2 racks), 14 Ltr BT 650/3 375 x 300 x 175mm (Suitable for 4 racks), 18Ltr BT 750 WATER BATH INCUBATOR SHAKER (Metabolic Shaking Inc ubator) BT 750/1 Tray Size 275x275x150mm (For 9 Flasks upto 250ml) BT 750/2 Tray Size 405x300x150mm (12 flasks upto 250ml) BT 750/3 Optional: Digital Temperature indicator cum controller Serving Science & Education 112
6 BT 760 VACUUM OVEN (Temp from ambient to 130º C) Inner S.S & Outer M.S BT 760/1 250mm Dia x 300mm Depth, Cap. 12 Ltr. Approx BT 760/2 300mm Dia x 300mm Depth, Cap. 24 Ltr. Approx BT 760/3 300mm Dia x 500mm Depth, Cap. 40 Ltr. Approx BT 760/4 Optional: Digital Temperature indicator cum controller BT 028 VACUUM PUMP (Oil Free), Portable diaphragm type. Motor Flow (Ltr./Min.) Max. Pressure (PSIG) Motor (H.P) BT 028/ / BT 028/ / BT 028/ / BT 028/ / BT 028/ / BT 028/04 Vacuum Gauge with Regulator for Above Pumps BT 028/A VACUUM PUMP (Oil Filled) Imported Motor Flow (Ltr./Min.) Motor (H.P) Stage BT 028/5 50 1/4 Single BT 028/ /3 Double BT 028/ /4 Double BT 028/B VACUUM PUMP (OIL SEALED) AIR COOLED (V-BELT DRIVEN) Capacity Motor Single Stage Double Stage BT 028/10 32 Ltr./min 0.25hp (L) (W) BT 028/11 50 Ltr./min 0.25hp (M) (X) BT 028/ Ltr./min 0.50hp (N) (Y) BT 028/ Ltr./min 0.75hp (K) (Z) BT 029 V.D.R.L. Shaker BT 030 VORTEX SHAKER (Test Tube Shaker) BT 800 WAX BATH PARAFFIN BT 800/1 6 cups & 8 sleeves BT 800/2 4 cups & 6 sleeves BT 820 OIL BATH (HIGH TEMP.) With Stirrer upto 350º C (Thermostatic) BT 820/1 Size 10 x 10 x BT 820/2 Size 14 x 14 x Serving Science & Education 113
7 BT 840 ROTARY VACUUM EVAPORATOR Supplied WithGeared Drive, Noiseless Motor.Speed ControlBy Analog Knob Upto 200rpm. JackArrangement Is Fitted On Tapered Front Base For Positioning Glass Assembly. Double Walled Thermostatic Water Bath, Complete Glass Assembly Provided WithRubber Tubes, Clips Etc.Complete Working Unit.Without Vaccum Pump & Chiller BT 840/70 Vertical Condenser Model BT 840/68 Diagonal Condenser Model BT 840/72 Cold Trap Condenser BT 840/4 Optional Digital Temperature Controlled Water Bath Fitting BT 840/5 Suitable Oil Free Vacuum Pump with Vacuum Gauge & Regulator BT 849 CHILLER Refrigerated Circulater Ltr Water Tank Made Of S.S. & Built In Circulating Pump With Rate of 2.5 Mtr. Digital Temp. Indicator Cum Controller Fitted In Unit. Cooling From +0º C To Below Ambient. BT 842 ROTARY VACUUM EVAPORATOR (Complete Digital & Motorised Lifting) Provided With LED Display For Rpm Control, Motorised Lift Arrangement For Glass Assembly Control Upto 100mm, Lifting Up/down Through Soft Touch Switches. Digital Temp. Controlled Water/ Oil Bath From Ambient +5 Deg C To 180 Deg C, Cap 4.5 Ltr. Geared Drive Unit Offers Smooth Rotational Speed From 20 To 180 Rpm. Water Circulation & Vacuum Inlet Assembly Is Fitted At The Rear Of The Lift To Reduce The Pressure At Glass Joints Of Condenser. Provided With Complete Glass Unit, Rubber Tubes, Clips Etc. BT 842/66 Vertical Condenser Model BT 842/65 Diagonal Condenser Model BT 842/67 Cold Trap Condenser Model BT 842/3 Suitable Oil Free Vacuum Pump With Vacuum Gauge & Regulator CAT. No. 840 CAT. No. 842 ROTARY VACUUM EVAPORATOR (Complete Digital & Motorised Lifting)
Government of Maharashtra s Ismail Yusuf College of Arts, Science and Commerce, Jogehswari (E), Mumbai.
Department of Chemistry Appendix 26 List of Instruments 1. Centrifuging Machine Remi Make 3950 1991-92 2. Elico Model 7868 1992-93 3. Colorimeter ERMA Model AE 11M (Sr. No 23075) 15525 1996-97 4. PH Meter
https://www.indiamart.com/asiansci/
+91-8079456316 Asian Scientific Instruments https://www.indiamart.com/asiansci/ Our company specializes in supplying and trading a technologically advanced range of laboratory instruments, deep freezers
Benchtop Lab Equipment REFERENCE CATALOG
Benchtop Lab Equipment REFERENCE CATALOG Globe Scientific's line of bench-top laboratory equipment offers a compact design to conserve valuable space in crowded work areas. All equipment models are engineered
SECTION 1 AGGREGATES - ROCKS
SECTION 1 AGGREGATES - ROCKS Aggregates represent the mainly used product in the building industry. They are used in concrete, bituminous conglomerates, plasters, road and railway sub grades etc. The different
Leaf area cutter; Leather strip; Magnifying Glass 3 dia China Measuring cylinder; M.c 100ml, 250,500,1000 Mounted Charts Showing different Human
Biology Apron coat; Terrycot Articulated Human Skeleton Beakers (different size) Burette; Borosil Glass Teflon stop cock, 50 ml Butterfly Net Chromatography paper Compound Microscope with built in system.
STUDENT 200 BALANCE, 200*0.01G BEAKERS, GRAD. S.F BOROSILICATE WITH SPOUT 250CM3
PHYSICS KIT STUDENT 200 BALANCE, 200*0.01G BEAKERS, GRAD. S.F BOROSILICATE WITH SPOUT 250CM3 BEAKERS, GRAD. S.F BOROSILICATE WITH SPOUT 1000CM3 BURETTE BRUSH, 15 X 150MM NYLON HEAD ON GALVANIZED WIRE STEM
Faculty of Technology. B. Tech. Polymer Technology. SEMESTER III(R 2013) PL6311 Polymer Chemistry Lab Requirements for a batch of 30 students
B. Tech. Polymer Technology SEMESTER III(R 2013) PL6311 Polymer Chemistry Lab S. No. Required 1. Electronic Balance 1 2. Thermostatic Water bath 2 3. MeltingPointApparatus 1 4. Retort Stand 15 5. Bunsen
Soda Glassware. Type Capacity ml ml ml ml ml ml ml ml.
Soda Glassware ABSORPTION TOWER, CALCIUM CHLORIDE (SGS.101.01) Cylindrical with tubule at base. Made from heavy moulded soda glass. Capacity : 250 ml. Dimensions : 335 mm. height x 65 mm. dia. BOTTLE REAGENT,
Uytengsu Teaching Lab Consumable Inventory
116.11 Absorbant Pads 130.57; 116.18; 112C.20; 114.50 Aluminum foil 112C.40 Anaerobic culture 116.74 Arktik Thermal Cycler Accessories Autoclavable bags 112.1; 114.48 Batteries 116.104 Beakers, Glass 118.46;
VAUGHANS (Hope Works)
CRUCIBLE FURNACE & SPARES FL-CM450 CM450 SAFTEY TILT CRUCIBLE FURNACE Runs on either Natural Gas or on LPG bottled gas Melts up to 2 litres of Aluminium in 35 minutes Temperature range - 950 C to 1000
Purchase Guide STANDARD AP * CHEMISTRY LABORATORY SUPPLIES SCIENTIFIC. from. P.O. Box 219 Batavia, IL (800) Fax (866)
STANDARD AP * CHEMISTRY LABORATORY SUPPLIES Purchase Guide from SCIENTIFIC Your Safer Source for Science (800) 452-1261 Fax (866) 452-1436 *AP is a registered trademark of the College Board, Batavia, which
Syncore Analyst Technical data sheet
STOP PROGRAMM SET DOWN UP DOWN UP Syncore Analyst Technical data sheet With the Syncore Analyst, BUCHI is offering a solution for a fast, gentle and environmentfriendly multiple sample concentration to
Extrusion. Process. The photo below shows a typical thermoplastic extruder.
Extrusion This process can be compared to squeezing toothpaste from a tube. It is a continuous process used to produce both solid and hollow products that have a constant cross-section. E.g. window frames,
Hydraulic Clamp Carrier. Installation & Operation Manual
Hydraulic Clamp Carrier Installation & Operation Manual Hydraulic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
Sheldon Manufacturing, Inc. is an ISO 9001:2008 certified manufacturer of high quality and innovative constant temperature equipment to the global
Water & Bead Baths Sheldon Manufacturing, Inc. is an ISO 9001:2008 certified manufacturer of high quality and innovative constant temperature equipment to the global market. Major product lines include
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia You can do lapping of 2 valves of different size in this range. Operative Range:
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
List of products with CE marking
23.05.2018 Directive 93/42/EC Medical products 40302010 302 Eye baths of plastic 40303006 303/50 Eye douches, clear glass, 50 ml 40303012 303/100 Eye douches, clear glass, 100 ml 40320010 320 Glass rods
2-pole design. New: Semi-hermetic compressors with 2-pole drive motor for mains voltages of 60 Hz. Now for 60 Hz mains voltage
2-pole design Semi-hermetic compressors with 2-pole drive motor for mains voltages of Hz New: Now for Hz mains voltage Baureihe HG series HG 2-pole 2-polig - t a glance t a glance Based on our compressors
Subject: Invitation of quotation for supply of Equipments for Dept. of Ilmul Amraz reg ***
NATIONAL INSTITUTE OF UNANI MEDICINE Kottigepalya, Magadi Main Road, Bangalore 560 091 (An autonomous body under Govt. of India, Ministry of AYUSH) Affiliated to Rajiv Gandhi University of Health Sciences
Di-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
PARTS LIST: Air Control Assembly (1632 Sander)
PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air
Kuzma RD Kit for ultrasonic record cleaning
Kuzma RD Kit for ultrasonic record cleaning ( ULTRASONIC CLEANER BATH IS NOT SUPPLIED WITH KIT) INSTRUCTION MANUAL FOR RD KIT. 2015-03 Page 1 Contents: Page: General information and description: 1-4 RD
AUTOMATIC SURFACE & INTERFACIAL TENSIOMETER CODE:
AUTOMATIC SURFACE & INTERFACIAL TENSIOMETER CODE: 11053-04 COMPLIANCES The instrument is based on the DuNuoy ring, Wilhelmy plate principles and confirms to various National and International standards
Sight glass window Sight flow indicator
SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. When it comes to selecting a sight glass, a wide variety of factors should be considered
MC60 - Mini Vacuum Pressure Casting Machine
MC60 - Mini Vacuum Pressure Casting Machine Advanced induction heated casting machine for jewellery alloys like gold, silver, brass, bronze or similar. The MC 60 offers excellent results for the smaller
Economic Separations. Product Catalog.
Economic Separations www.ecosep.in.. Horizontal Electrophoresis Apparatus Vertical Electrophoresis Apparatus Electroblotting Apparatus UV-Transilluminators Gel-Documentation Power Packs Product Catalog
DELUXE AIR PRESSURE CASTING MACHINE MODEL # S
DELUXE AIR PRESSURE CASTING MACHINE MODEL # S INSTALLATION 99-002-D4AP 99-002-D4AP-A MAINTENANCE The points to look for in order to obtain a long and trouble free operation are: a. See that the oil fog
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
S.NO Description Quantity Rate Amount
INTERIOR WORKS NANDIMANDALAM BRANCH S.NO Description Quantity Rate Amount 1 Full height partition with laminate finish and glass. Providing & fixing partly glazed partly paneled Dry Wall Partition with
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Repair Parts List REFRIGERATOR MODEL NUMBER RC24CN-3AI MANUFACTURING NUMBER 3N80B
REFRIGERATOR Repair Parts List MODEL NUMBER RC24CN-3AI MANUFACTURING NUMBER 3N80B When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
https://www.indiamart.com/sarithascientificglasswork/
+91-8048410659 Saritha Scientific Glass Works https://www.indiamart.com/sarithascientificglasswork/ We are acknowledged among clients for manufacturing, supplying and importing an accurately designed range
Organisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer
Cat. No. 9-0 SDS Max Demolition Hammer Cat. No. -0 SDS Max Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 8-9-0 d 000 8-9-0 d Special Tools Require Forcing
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
XV 1000 PARTS MANUAL Carousel ATC Fanuc / Siemens May 2007
XV 1000 PARTS MANUAL Carousel ATC Fanuc / Siemens May 2007 Document Number 0705002A Issue A May 2007 XV1000 X Axis Assembly Drawing No. L-1060R0031 Feb-07 32 8-102003 M6 Spring Washer 8 33 8-101001 M6
OPERATION AND MAINTENANCE FOR MODEL MRV050A REVERSIBLE
OPERATION AND MAINTENANCE FOR MODEL MRV050A REVERSIBLE MANUAL AIR MOTOR 04666770 Edition 1 April, 1999 IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING TOOL. FAILURE TO OBSERVE
Round Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
Desert Gold! OK Enterprises P.O. Box 2908 Lake Havasu City, AZ
Desert Gold! Desert Drywash OK Enterprises P.O. Box 2908 Lake Havasu City, AZ 86405 www.lookout2000.com/desertgold email: desertgold@lookout2000.com 866-496-3197 ext 702 DESERT DRYWASHER MATERIAL REQUIREMENTS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS ROTARY VANE POSITIVE DISPLACEMENT DRY-AIR PUMPS VAPOR-OIL PUMPS MADE IN AMERICA SINCE 1939 CONGRATULATIONS! You have purchased one of the most dependable and thoroughly proven Rotary
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
General Four-Way Operation, Maintenance & Service Manual
General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and
Maintenance Information
16601023 Edition 2 January 2014 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
SO-LOW LAB FREEZERS TO -85 C
WWW.SO-LOW.COM E-MAIL: SALES@SO-LOW.COM SO-LOW LAB FREEZERS TO -85 C RESEARCH - TESTING CLINICAL APPLICATIONS PHARMACY FREEZERS LIFE SCIENCES INDUSTRIAL USE ENVIRONMENTAL EQUIPMENT CO., INC. 10310 Spartan
Technical assistance for the Animal Health Department of the KVFA and the Food and Veterinary Laboratory (Kosovo) - Deliverable 9.
EUROPEAN UNION The European Union IPA 2013 programme for Kosovo KOSOVO TECHNICAL ASSISTANCE FOR THE ANIMAL HEALTH DEPARTMENT OF THE KVFA AND THE FOOD AND VETERINARY LABORATORY (KOSOVO) REF: EuropeAid/133795/DH/SER/XK
30AUTO Speed Lathe Manual
30AUTO Speed Lathe Manual Standard Features 3/4 HP Motor Air-Collet Closure 1800 RPM, Single Speed Electric Brake Cast Housing 5C Collets 3 Phase / 240 Volts DESCRIPTION: The Crozier Model 30AUTO Automotive
Screw-in resistance thermometers with terminal head Form B
Data Sheet 90.2002 Page 1/7 Screw-in resistance thermometers with terminal head Form B for temperatures from -50 to +600 C with replaceable measuring insert as single or twin resistance thermometer terminal
- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously
Split frame OD-Mounted Pipe Cutting and Beveling Machine The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half
Vaneox - Pressing Technology Tools:
Vaneox - Pressing Technology Tools: Press Die XRF - Mixer Filling tool for BOREOX Milling and Accessories Alu cups Pelletfilms Binder Sample Storage Vaneox - 25t manual Max pressure 25t Pressure display
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
Multi talented! "THE NEW GENERATION" SATAjet the versatile spray gun series. SATAjet 1000: Allround paint spray guns for craft and industry
SATAjet 1000 - the versatile spray gun series Multi talented! SATAjet 1000: Allround paint spray guns for craft and industry High speed application Fine atomisation Optimum finish results in all fields
FBX-PA-2AC. Third edition : April No
FBX-PA-2AC Third edition : April 2006 No. 060058 INTRODUCTION Thank you very much for purchasing Kansai Special FBX series. Read and study this Instruction Manual carefully before you start any of the
Series 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
Precision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
Horizontal and Vertical. Metal Cutting Band Saw MODEL: BS-115
Horizontal and Vertical Metal Cutting Band Saw MODEL: BS-5 SAFETY. Know your band saw. Read the operator s Manual carefully. Learn the operations, applications and limitation.. Use recommended accessories.
ELEMENTEL PRODUCT GROUPS Product Information Document. Documentation Center l Catalogs l Product List
www.elementel.com PRODUCT GROUPS 2018-2019 Product Information Document Documentation Center l Catalogs l Product List ELEMENTEL Analitik ve Bio Teknolojik Sistemler Product Groups We offer research quality
Durapipe ABS Jointing Guide
Durapipe ABS Jointing Guide Solvent cement welding offers a simple and quick means of constructing high integrity, leak-free joints. The solvent cement operates by chemically softening the joint surfaces.
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
ILFORD SPORTSVIEW PROJECTOR INSTRUCTION BOOK
ILFORD SPORTSVIEW PROJECTOR INSTRUCTION BOOK Now that you're the owner of a new Sportsview Projector, you'll want to begin using it right away. The Sportsview Projector is extremely simple to operate,
VACUUM MACHINE FOR INVESTING & CASTING
by Grobet VACUUM MACHINE FOR INVESTING & CASTING No. 21.805G 110 volt No. 21.805GX 220 volt No. 21.806G Table only without pump OPERATING INSTRUCTIONS IS21805G INVESTING 8" Plastic Bell Jar Switch Valve
Inspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
SεW Supply, LLC 800B Parts List - OLD
0 S040300 Thumb Screw 4-Set (Replacement for S-4-3) 1 D010000 Shot & Powder Tube Lids 2 TENG02000 Shot & Powder Plastic Tubes 12" 3 D03000 Shot & Powder Baffles 4 S040000 Shot & Powder Reservoir Plate
INTERPLANT STANDARD - STEEL INDUSTRY. MEASUREMENT OF MOISTURE CONTENT (Second Revision) IPSS: (Second Revision)
INTERPLANT STANDARD - STEEL INDUSTRY IPSS MEASUREMENT OF MOISTURE CONTENT (Second Revision) IPSS: 2-07-077-13 (Second Revision) No Corresponding IS Formerly: IPSS:2-07-077-93 0. FOREWORD 0.1 This Interplant
ASSIGNMENT 2. Textbook Assignment: 2-1. Levels are designed for which of the following purposes?
ASSIGNMENT 2 Textbook Assignment: "Levels," "Plumb Bulbs," "Scribers," "Squares," "Surface, Depth, and Height Gages," "Ring and Snap Gages and Gage Blocks," "Miscellaneous Measuring Gages," "Pliers and
Benchtop Incubator Shakers
www.zhichenginstrument.com Benchtop Incubator Shakers Models: ZHWY-200B ZHWY-100B ZHWY-200D ZHWY-100D ZHWY-100C ZHICHENG benchtop incubator shakers offer small capacity growth of biological organisms under
Call toll-free
NMR TUBES Providing superior quality NMR tubes for the marketplace for over 40 years. Performance is guaranteed by the Kimble design, manufacturing, and quality processes that certify for wall thickness,
Parts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
Parts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
Wax Pattern Assembly Handbook: 11 Catalog and Price List. Wax
Wax Pattern Assembly Handbook: 11 Catalog and Price List Wax The BEST way to seal patterns Wax Connections has been leading the investment casting industry since 1993, producing pattern sealing equipment.
Modig RigiMill Prospect. Modig RigiMill for a wide variation of aircraft parts
Modig RigiMill for a wide variation of aircraft parts The RigiMill is a small gantry machine that can be equipped with either one or two gantries on the same X-axis guide-ways. It is developed to handle
EMO. Service Instruction. created by Frank Weithöner. Table of contents: Special Tools Assembling Mixing Chamber
EMO Service Instruction created by Frank Weithöner Table of contents: - Special Tools Disassembling Mixing Chamber Assembling Mixing Chamber Adjustment Rotor / Level Indicator Unit Temperature Compensating
LN-25 PRO Wire Feeder
SEMIAUTOMATIC WIRE FEEDERS LN-25 PRO Wire Feeder Portable Industrial Wire Feeders Built upon the tradition and success of the LN -25, the new LN -25 PRO is designed to be simple, reliable and easy to service.
HBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
INDUTHERM Mini Vacuum Pressure Casting Machine MC 20V
INDUTHERM Mini Vacuum Pressure Casting Machine MC 20V Advanced induction heated casting machine for all standard alloys like gold, silver steel, palladium and platinum alloys are possible to cast. MC 20
Dependable and tough, the Saddle Machine was specifically SADDLE MACHINES. Saddle Machines Include:
SADDLE MACHINES Just a brief note to say I am very pleased with my Mathey Short Saddle Machine... it is as old or older than I am and it has had new parts and pieces... but it still performs very well
Bins, Condensers, and Accessories Service Parts Table of Contents
Table of Contents B90/BX8...page HTB0/0 & BH0/0 & BH0... page BH0S...page SB80, SBX0, SBX... page HTB00/BH00A...page B, B, B0, B0, B8, B98... page HTB...page 8 BH800/BH0...page 9 BH80...page 0 BH900...page
Parts Catalog MIXERS
Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
28.00 Rmt sqm sqm
SEALED BID FORMAT FOR THE INTERIOR FURNISHING WORKS AT SBI CHALAKUDY BRANCH. Sl No. Description of item Quantity Unit Rate Amount 1 Counter Table :- The width and height of the table is 100cm and 75cm
Pneumatic Clamp Carrier. Installation & Operation Manual
Pneumatic Clamp Carrier Installation & Operation Manual Pneumatic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
Cressington 108 Auto/SE Sputter Coater Standard Operating Procedures (S.O.P)
Cressington 108 Auto/SE Sputter Coater Standard Operating Procedures (S.O.P) The Cressington sputter system is designed for only one purpose which is the deposition of gold onto a sample to reduce charging
Installation of the JD 900 Series Flex Grain Platform Auger Trough Liner Kit
www.polyskid.com P. O. Drawer 349, Monticello, GA. 31064 Phone: 800-542-7659 Fax: 706-468-2881 E-Mail: polytech@polyskid.com Installation of the JD 900 Series Flex Grain Platform Auger Trough Liner Kit
Basic Principles and Operation of Transformer
Basic Principles and Operation of Transformer CONSTRUCTIONAL ASPECTS Cores In order to enhance core s magnetic properties, it is constructed from an iron and silicon mixture (alloy). The magnetic core
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
DynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
Building Rudy Kouhoupt s Walking-Beam Engine
Building Rudy Kouhoupt s Walking-Beam Engine Some time ago I came across a copy of Rudy Kouhoupt s article: "Build this Walking-Beam Engine" (Popular Mechanics August 1969), and decided to try and make
MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding
MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding Ex GST Inc GST $5,590.00 $5,290.00 $6,149.00 $5,819.00 Special
InTurn Ultra and Ultra-T Indexing and Turning 4 th axis
Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both
MC16 Mini Vacuum Pressure Casting Machine
MC16 Mini Vacuum Pressure Casting Machine Advanced induction heated casting machine for all standard alloys like gold, silver steel, palladium and platinum alloys are possible to cast. MC 16 offers excellent
Student, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
PRECISION CUTTING MICRACUT 202
PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,
SIGHT GLASS. Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels.
SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. SIGHT GLASS Sight flow indicator. A sight flow indicator is used in process pipelines
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL 6115 POTATO PEELER ML-137600 ML-137601 PRIOR MLS COVERED IN THIS CATALOG ML-19869 ML-19683 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43064 Rev.
DISPLAY UNITS (HEATED/CHILLED)
METALCARRELLI 4 DISPLAY UNITS (HEATED/CHILLED) presentation Having always been present in the HO.RE.CA. sector, we have over time managed to develop a range of products for displaying both heated and chilled
Printed from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1111 020 2116 1 Crankcase 2-7 2 9371 470 3120 2 Cylindrical pin 6x20 3 9022 341 1010 10
pluribead KIT Cell Separation Protocol M-Bead
pluribead KIT Cell Separation Protocol M-Bead pluriselect@hiss-dx.de 15 14 13 12 11 9 8 7 6 5 4 3 2 1 50 40 30 20 2 Contents Contents pluribead Kit Components & Additional Materials 2 Separation Protocol