Technical assistance for the Animal Health Department of the KVFA and the Food and Veterinary Laboratory (Kosovo) - Deliverable 9.

Transcription

1 EUROPEAN UNION The European Union IPA 2013 programme for Kosovo KOSOVO TECHNICAL ASSISTANCE FOR THE ANIMAL HEALTH DEPARTMENT OF THE KVFA AND THE FOOD AND VETERINARY LABORATORY (KOSOVO) REF: EuropeAid/133795/DH/SER/XK Deliverable 9.3 Laboratory equipment required, PRAG format August 2015 Consortium Agrotec SpA / IZSVe / NIRAS 1 / 16

2 This document has been produced with the financial assistance of the European Union The contents of this publication are the sole responsibility of the author / contractor / implementing partner and are in no way be taken to reflect the views of the European Union. Consortium Agrotec SpA / IZSVe / NIRAS 2 / 16

3 TECHNICAL SPECIFICATIONS + TECHNICAL OFFER Contract title : Supply of < > Publication reference : <insert reference> Columns 1 should be completed by the Contracting Authority Columns 2-3 should be completed by the tenderer Column 4 is reserved for the evaluation committee The tenderers are requested to complete the template on the next pages: Column 2 is completed by the Contracting Authority shows the required specifications (not to be modified by the tenderer), Column 3 is to be filled in by the tenderer and must detail what is offered (for example the words compliant or yes are not sufficient) Column 4 allows the tenderer to make comments on its proposed supply and to make eventual references to the documentation The eventual documentation supplied should clearly indicate (highlight, mark) the models offered and the options included, if any, so that the evaluators can see the exact configuration. Offers that do not permit to identify precisely the models and the specifications may be rejected by the evaluation committee. The offer must be clear enough to allow the evaluators to make an easy comparison between the requested specifications and the offered specifications. Consortium Agrotec SpA / IZSVe / NIRAS 3 / 16

4 EQUIPMENT (LABORATORY) Consortium Agrotec SpA / IZSVe / NIRAS 4 / 16

5 Item no. 1 BACTERIOLOGY JARS Quantity = no. 2 jars 2,5 3,5 litre capacity For Petri dishes Ø up to 120 mm Material: shockproof (lid and jar) - easily cleanable and disinfectable (lid and jar) transparent (jar) Anaerobe atmosphere generation bags(*)+ anaerobic indicator included Microaerophilic atmosphere generation bags(*) included CO 2 enriched atmosphere generation bags(*) included Lid with carrying handle and vacuum release screw (or equivalent system for permitting the inlet of air to the jar) bags designed for the volume of the offered jars; at least (*) 50 bags (single packaging) for each kind of atmosphere OXOID - SIGMA-ALDRICH - MERCK MILLIPORE (Anaerocult ) (2 jars bags) Consortium Agrotec SpA / IZSVe / NIRAS 5 / 16

6 Item no. 2 WATER BATH Quantity = no. 1 water bath With gable cover Rounded and seamless tank Stainless steel (cabinet, cover, tank) Nominal capacity >20 l Temperature range: room t +5 C +90 C (with cover) Temperature stability at +37 C 0,5 C Temperature uniformity at +37 C 0,25 C Temperature display: resolution 0,1 C Water control installed OR the bath will not be damaged if it is allowed to run dry Over temperature protection Drain tap or drain pump Working depth: a least 150 mm or higher STUART EQUIPMENT - MEMMERT - THERMO SCIENTIFIC Consortium Agrotec SpA / IZSVe / NIRAS 6 / 16

7 Item no. 3 SYSTEM FOR GEL ELECTROPHORESIS Power supply for gel electrophoresis o Output specifications: 300 V, 2000 ma, 300 W o Type of output: Constant voltage, constant current or constant power o Output terminals: at least two pair banana jacks floating in parallel o Timer control o Programmable methods can be stored Vertical electrophoresis cell (polyacrylamide) o Gel length about 10 cm o Possibility of casting 2 gels in one cell Submerged horizontal electrophoresis cell (agarose) o Gel length about 10 cm Quantity = no. 1 power supply no. 2 vertical cells no. 2 horizontal cells POWER SUPPLY BIORAD - BIOSIGMA - THERMO SCIENTIFIC - CELLS BIORAD - BIOSIGMA - THERMO SCIENTIFIC (2+2 cells) Consortium Agrotec SpA / IZSVe / NIRAS 7 / 16

8 Item no. 4 LABEL PRINTER FOR IDENTIFICATION OF SAMPLES Quantity = no. 1 printer Size: 60 cm (max length) 40 cm (width) 40 cm (height) Thermal transfer printing Resolution min 300 dpi Max/Min label width: 5 cm / 3 cm Max/Min label height: 5 cm / 0,9 cm Self-adhesive freezer-proof labels available Roll fed All major 1D-2D barcode symbologies are supported USB connection Printing software included INTERMEC - BROTHER - ZEBRA Consortium Agrotec SpA / IZSVe / NIRAS 8 / 16

9 TECHNICAL SPECIFICATIONS + TECHNICAL OFFER Contract title : Supply of < > Publication reference : <insert reference> Columns 1 should be completed by the Contracting Authority Columns 2-3 should be completed by the tenderer Column 4 is reserved for the evaluation committee The tenderers are requested to complete the template on the next pages: Column 2 is completed by the Contracting Authority shows the required specifications (not to be modified by the tenderer), Column 3 is to be filled in by the tenderer and must detail what is offered (for example the words compliant or yes are not sufficient) Column 4 allows the tenderer to make comments on its proposed supply and to make eventual references to the documentation The eventual documentation supplied should clearly indicate (highlight, mark) the models offered and the options included, if any, so that the evaluators can see the exact configuration. Offers that do not permit to identify precisely the models and the specifications may be rejected by the evaluation committee. The offer must be clear enough to allow the evaluators to make an easy comparison between the requested specifications and the offered specifications. Consortium Agrotec SpA / IZSVe / NIRAS 9 / 16

10 EQUIPMENT (METROLOGY) Consortium Agrotec SpA / IZSVe / NIRAS 10 / 16

11 Item no. 1 CERTIFIED GREY GLASS MICROPLATE FOR ELISA READER CALIBRATION OF ABSORBANCE Certification issued by an official recognized metrological Institute (ISO17025 or equivalent) at the wavenlenghts of nm Maximal absorbance values for all wavenlenghts 2.3 AU At least five grey glass filters (with five different absorbance values) Each filter must allow the simultaneous calibration of all reading channels of the Elisa reader* (*Elisa reader in the Animal Health Lab: Tecan Nanoquant) Quantity = no. 1 plate (see footnote) Only one reference microplate is needed for the Elisa reader installed in the Serology laboratory (Tecan Nanoquant 12 reading channels); a second additional microplate should be needed for the Elisa readers with 8 reading channels (if there are any in the Food Analysis and Chemistry departments) 2500 HELLMA GMBH cod (purchase) + MTX LAB SYSTEMS cod nm 1500 (certification) Consortium Agrotec SpA / IZSVe / NIRAS 11 / 16

12 Item no. 2 SET OF CERTIFIED WEIGHTS FOR SCALE CALIBRATION Quantity = no. 1 set Amagnetic stainless steel Certification issued by an official recognized metrological Institute (ISO17025 or equivalent) Nominal values and accuracy class (1 weight / each): 1 mg E1 20 g F1 10 mg E1 50 g F1 20 mg E2 100 g F1 100 mg E2 200 g F1 500 mg E2 500 g F1 1 g F g F1 SARTORIUS METTLER-TOLEDO - No reference numbers available: please specify nominal value + class in order to identify the product 1300 (purchase) (certification) Consortium Agrotec SpA / IZSVe / NIRAS 12 / 16

13 Item no. 3 SCALE (6 DIGIT RESOLUTION) FOR MICROPIPETTE CALIBRATION Quantity = no. 1 scale Designed specifically for calibrating micropipettes (it cannot be used for conventional weighing procedures) Delivery must include the anti-vibration table, on which the scale shall be installed Installed on-site by the supplier Personal computer connected to the scale, laser printer and software for calibration (including the printout of the reports) must be included The micropipette calibration reports should indicate Systematic error Random error Measurement uncertainty (calculated according to ISO 8655) Compliance with the ISO 8655 requirements The technical assistance and the calibration service by an officially recognized metrological Institute should be ensured on-site in KFVL Pristina for at least 4 years METTLER-TOLEDO - -cod. XP26PC SARTORIUS - cod. GPC26-CW (purchase) (certification) Consortium Agrotec SpA / IZSVe / NIRAS 13 / 16

14 Item no. 5 DEVICES FOR MONITORING THE ENVIRONMENTAL CONDITIONS IN THE ROOM WHERE THE SCALE FOR MICROPIPETTE CALIBRATION HAS BEEN PLACED Hygrometer (digital display, resolution 1%) calibrated by an official recognized metrological Institute (ISO17025 or equivalent) Barometer (digital display, resolution 1 hpa) calibrated by an official recognized metrological Institute (ISO17025 or equivalent) Thermometer (digital display, 0,1 C resolution - thermometer will be calibrated inside KFVL) Quantity = no. 1 hygrometer no. 1 barometer no. 1 thermometer OREGON SCIENTIFIC (combined device) cod. WMR928NX (for monitoring the room where micropipettes are calibrated) 1000 (purchase) (certification) Consortium Agrotec SpA / IZSVe / NIRAS 14 / 16

15 Item no. 6 THERMOMETER FOR SECONDARY THERMOMETER / CLIMATIC CHAMBERS CALIBRATION Digital, 0,01 C resolution connectable to PC via RS232 serial port / USB temperature sensor: type PT100 three temperature sensors (in order to allow the temperature mapping inside the incubators) certified by an officially recognized metrological Institute (ISO17025 or equivalent) from -80 C till +100 C at least 20 temperature values / set points Quantity = no. 1 thermometer EBRO cod.???? DELTAOHM cod. DO (purchase) (certification) Consortium Agrotec SpA / IZSVe / NIRAS 15 / 16

16 Item no. 7 CALIBRATOR FOR SECONDARY THERMOMETER CALIBRATION Quantity = no. 1 calibrator Heating system with Peltier cell suitable for calibrating PT100 sensors the diameter of the holes in thermoblock must fit with the diameter of the PT100 thermocouples the device should allow the simultaneous calibration of at least 3 thermal probes temperature range at least C GIUSSANI cod. 633 QUARTZ EUROTRON cod.???? AMETEK cod.???? 5000 Consortium Agrotec SpA / IZSVe / NIRAS 16 / 16