Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Size: px
Start display at page:

Download "Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK"

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0) Fax: +44 (0) Website: Laboratory locations: Calibration performed by the Organisations at the locations specified below s covered by the organisation and their relevant activities details Activity code Address Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Local contact Mr N Morgan Mass calibration Electrical calibration Pressure calibration Temperature calibration Dimensional calibration Address Metrology division Unit K2 M7 Business Park Newhall Naas County Kildare Ireland Local contact Mr P Kinsella Tel (0) Fax (0) Pressure calibration Electrical calibration Temperature calibration Mass calibration Humidity calibration Site activities performed away from the locations listed above: details Activity code The customer s site or premises must be suitable for the nature of the particular calibrations undertaken and will be the subject of contract review arrangements between the laboratory and the customer Local contact Mr N Morgan Pressure calibration Site Assessment Manager: PC Page 1 of 15

2 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, DETAIL OF ACCREDITATION PRESSURE & Site Gas pressure (absolute) gauges 2 Pa to 160 Pa 160 Pa to 1.4 kpa 1.4 kpa to 710 kpa 710 kpa to 27.6 MPa 27.6 MPa to 40 MPa 10 % % + 32 Pa % Pa % + 10 Pa % + 10 Pa measuring devices with an electrical output may be undertaken. Gas pressure (gauge) gauges and Pressure equivalent calibration of Dead Weight Testers (pressure balances supplied with an associated mass set) and Effective area calibration of Dead Weight Testers Gas pressure (differential) kpa to kpa kpa to 0 Pa 0 Pa to 1.4 kpa 1.4 kpa to 200 kpa 200 kpa to 710 kpa 710 kpa to 27.6 MPa 27.6 MPa to 40 MPa % % Pa % Pa % Pa % % % Calibrations may also be performed over an environmental temperature range of -10 C to +150 C, with an uncertainty of ± 1 C on the reported temperature. There will be an additional pressure uncertainty of ± (30 ppm Pa). Calibrations of differential pressure devices with low and high pressure ports at a common mode pressure of 3.5kPa 6 Pa to 10 kpa (Line pressure 3.5 kpa) % Pa indicating instruments and gauges 0 Pa to (7 - line pressure) MPa (Line pressure 200 kpa to 7 MPa) % of line pressure, plus % of differential pressure, plus 5.0 Pa Differential pressure cells may be calibrated using digital communications protocols 7 MPa to ( line pressure) MPa (Line pressure 7 MPa to 27.6 MPa) 0 Pa to ( line pressure) MPa (Line pressure 27.6 MPa to 41.4 MPa) % of line pressure, plus % of differential pressure, plus 10 Pa % of line pressure, plus % of differential pressure, plus 16 Pa Calibrations may also be performed over an environmental temperature range of +2 C to +8 C with an uncertainty of ± 1 C on the reported temperature. Assessment Manager: PC Page 2 of 15

3 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, PRESSURE (cont d) Hydraulic pressure (gauge) & Site gauges. Pressure equivalent calibration of Dead Weight Testers (Pressure balance with associated mass set). Effective area calibration of Dead Weight Testers. 137 kpa to 200 kpa 200 kpa to 7 MPa 7 MPa to 172 MPa 172 MPa to 345 MPa % + 14 Pa % + 16 Pa % ppm/mpa % Hydraulic pressure (absolute) gauges. 200 kpa to 7 MPa 7 MPa to 172 MPa 172 MPa to 345 MPa % + 28 Pa % ppm/mpa + 15 Pa % Hydraulic pressure (differential) indicating instruments and gauges 0 Pa to (172 - line pressure) MPa (Line pressure 1.7 MPa to 172 MPa) % of line pressure plus % of differential pressure plus 20 Pa MASS Nominal value (g) (mg) Intermediate values can be calibrated with an uncertainty not less than that interpolated from the next higher and lower nominal value in the table. Calibrations can be given in other units as required. Assessment Manager: PC Page 3 of 15

4 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, ELECTRICAL DC Voltage 0 mv to 200 mv 10 ppm V 200 mv to 2 V 10 ppm V 2 V to 20 V 10 ppm + 10 V 20 V to 200 V 10 ppm V 200 V to 1050 V 10 ppm mv DC Current 0 μa to 200 A 20 ppm na 200 A to 2 ma 20 ppm + 10 na 2 ma to 20 ma 20 ppm + 75 na 20 ma to 100 ma 40 ppm na Using nominal 10 shunt 100 ma to 200 ma 35 ppm µa 200 ma to 2 A 250 ppm + 30 µa 2 A to 20 A 500 ppm ma DC Current 100 ma to 202 ma 62 ppm µa Generation only 202 ma to 2.02 A 90 ppm + 72 µa 2.02 A to 20 A 330 ppm ma 20 A to 1000 A 0.22 % ma Simulation using multi turn coil DC Resistance 0 to 2 15 ppm to ppm to ppm to 2 k 15 ppm m 2 k to 20 k 15 ppm + 15 m 20 k to 200 k 15 ppm m 200 k to 2 M 15 ppm M to 20 M 20 ppm M to 200 M 400 ppm M to 1 G 0.35 %+ 12 k AC VOLTAGE 1 mv to 200 mv 20 Hz to 55 Hz 150 ppm + 15 µv 55 Hz to 10 khz 120 ppm + 15 µv 10 khz to 30 khz 350 ppm + 16 µv 30 khz to 100 khz 600 ppm + 20 µv 200 mv to 2 V 20 Hz to 55 Hz 140 ppm + 40 µv 55 Hz to 10 khz 120 ppm + 40 µv 10 khz to 30 khz 260 ppm + 40 µv 30 khz to 100 khz 350 ppm µv 100 khz to 500 khz 0.65 % + 15 mv 2 V to 20 V 20 Hz to 55 Hz 150 ppm µv 55 Hz to 10 khz 140 ppm µv 10 khz to 30 khz 260 ppm µv 30 khz to 100 khz 550 ppm mv 100 khz to 500 khz 0.65 % mv Assessment Manager: PC Page 4 of 15

5 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, AC VOLTAGE (cont d) 20 V to 200 V 20 Hz to 10 khz 140 ppm mv 10 khz to 30 khz 260 ppm mv 30 khz to 100 khz 600 ppm + 15 mv 200 V to 1 kv 45 Hz to 10 khz 200 ppm + 25 mv 10 khz to 30 khz 380 ppm + 30 mv AC CURRENT 20 μa to 200 μa 55 Hz to 5 khz % + 50 na 5 khz to 10 khz % + 50 na 200 μa to 2 ma 55 Hz to 10 khz % na 2 ma to 20 ma 55 Hz to 10 khz % μa 20 ma to 200 ma 55 Hz to 10 khz % + 50 μa 200 ma to 2 A 55 Hz to 1 khz % μa 2 A to 20 A 55 Hz to 1 khz % ma AC CURRENT 25 μa to 200 μa Generation only 40 Hz to 45 Hz 0.17 % na 45 Hz to 1 khz % na 200 μa to 2 ma 40 Hz to 45 Hz 0.18 % μa 45 Hz to 1 khz % μa 2 ma to 20 ma 40 Hz to 45 Hz 0.18 % μa 45 Hz to 1 khz % μa 20 ma to 200 ma 40 Hz to 45 Hz 0.18 % μa 45 Hz to 1 khz % + 86 μa 200 ma to 2 A 40 Hz to 45 Hz 0.18 % ma 45 Hz to 1 khz % μa 2 A to 20 A 40 Hz to 45 Hz 0.16 % + 11 ma 45 Hz to 100 Hz % ma 20 A to 100 A at 50 Hz 0.22 % ma Simulation using a multi turn coil 100 A to 1000 A at 50 Hz 0.22 % ma Assessment Manager: PC Page 5 of 15

6 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, AC RESISTANCE 55 Hz to 1 khz 30 µω to 10 mω 26 µω 10 mω to 100 mω 0.26 % 100 mω to 1 Ω 0.26 % 1 Ω to % 10 Ω to 100 Ω 0.16 % 100 Ω to 1 k Ω 0.16 % CAPACITANCE Sourcing only 1 nf 29 pf 10 nf 61 pf 20 nf 99 pf 50 nf 220 pf 100 nf 370 pf 1 μf 5.1 nf 10 μf 78 nf FREQUENCY 10 MHz Clock frequency 1.0 parts in 10 8 Generation 10 mhz to 80 MHz 5.0 parts in mhz to 80 MHz 5.0 parts in µhz Frequency may also be expressed in terms of time; 1/f, for repetitive signals or in other units such as revolutions per minute. TIME INTERVAL 0 s to 1 day 100 ms Manually triggered single events. RPM 60 RPM to RPM 50 ppm RPM Generate Assessment Manager: PC Page 6 of 15

7 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, OSCILLOSCOPES Vertical deflection coefficients DC 30 mv to 300 mv 300 mv to 120 V 1.1 % 0.30 % Square-wave & DC signals appropriate for the calibration of oscilloscope vertical deflection coefficients Peak to Peak Voltage 1 khz 30 mv to 300 mv 300 mv to 6 V 1.3 % 0.70 % Horizontal deflection coefficients Time 10 ns to 1 s 0.10 % Pulse markers The uncertainties quoted above are based on the readout resolution of typical oscilloscopes. ELECTRICAL SIMULATION OF TEMPERATURE Base Metal Thermocouples -200 C to C C Noble Metal Thermocouples 0 C to 500 C C 500 C to 1800 C C Type B (Noble) 0 C to 500 C 0.50 C 500 C to 1800 C 0.10 C Type C 0 C to 2315 C C Base Metal Thermocouples -200 C to C 0.17 C Noble Metal Thermocouples 0 C to 500 C 0.26 C 500 C to 1800 C 0.25 C Type B (Noble) 0 C to 500 C 0.50 C 500 C to 1800 C 0.28 C Excluding automatic CJC Including automatic CJC Cold Junction Compensation 0 C to 30 C 0.15 C Pt 100 resistance thermometer simulation Pt 1000 resistance thermometer simulation -200 C to +266 C 266 C to 830 C -200 C to +266 C 266 C to 830 C C C C 0.13 C Assessment Manager: PC Page 7 of 15

8 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, TEMPERATURE Temperature indicators and recorders, with temperature sensor(s) 0.01 C (Water Triple Point) -95 C to 140 C 140 C to 150 C 150 C to 650 C C C C Resistance thermometers 0.01 C (Water Triple Point) -95 C to 140 C 140 C to 150 C 150 C to 650 C C C C 0.10 C Thermocouples Base Metal -95 C to 0 C 0 C to 30 C 30 C to 650 C 0.40 C 0.10 C 0.40 C Noble Metal Type R and S Type B 0 C to 650 C 0 C to 650 C 0.40 C 0.70 C Metal Block Calibrators and portable liquid baths -100 C to 250 C 250 C to 650 C C 0.13 C LENGTH NOTES Orifice plates Micrometers, External Caliper gauges (inc. Vernier, dial and digital) Dial gauges and dial test indicators Length gauges, flat and spherical ended BS EN ISO :2003 Bore d diameter 10 to 700 BS 870: to 125 BS 887: to 150 BS 907:2008 and BS 2795: to to Heads:2.0 between any two points Overall performance (8.0 x length in m) RANGE IN MILLIMETRES AND UNCERTAINTY IN MICROMETRES UNLESS OTHERWISE STATED The uncertainty quoted is for the departure from either flatness, straightness, parallelism, or squareness, i.e. the distance separating the two parallel planes which just enclose the surface under consideration. ANGLE Squares, blade type BS 939: to (see note 1) Spirit levels As BS 3509:1962 and BS 958: seconds of arc to 60 minutes of arc nominal sensitivity Mean sensitivity 10 % of nominal Minimum 0.50 seconds of arc Assessment Manager: PC Page 8 of 15

9 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, FORM Straightedges Cast iron, Steel and Granite BS 5204:Part 1:1975 BS 5204:Part 2: to (2.0 x length in m) (see Notes) PRESSURE Gas pressure (absolute) gauges 1.4 kpa to 710 kpa 710 kpa to 10.1 MPa % Pa % + 20 Pa measuring devices with an electrical output may be undertaken. Gas pressure (gauge) gauges -100 kpa to -1.4 kpa 1.4 kpa to 10 MPa % % Gas pressure (differential) Calibrations of differential pressure devices with low and high pressure ports at a common mode pressure of 3.5 kpa 6 Pa to 10 kpa (Line pressure 3.5 kpa) % Pa Hydraulic pressure (gauge) gauges 358 kpa to 3.5 MPa 3.5 MPa to MPa % + 30 Pa % Hydraulic pressure (absolute) gauges 458 kpa to 3.6 MPa 3.6 MPa to MPa % + 50 Pa % + 20 Pa Assessment Manager: PC Page 9 of 15

10 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, MASS Nominal value (g) (mg) Intermediate values can be calibrated with an uncertainty not less than that interpolated from the next higher and lower nominal value in the table. Calibrations can be given in other units as required. ELECTRICAL DC VOLTAGE 0 mv to 200 mv 10 ppm V 200 mv to 2 V 10 ppm V 2 V to 20 V 10 ppm + 10 V 20 V to 200 V 10 ppm V 200 V to 1 kv 10 ppm mv DC CURRENT 0 A to 200 A 200 A to 2 ma 2 ma to 20 ma 20 ma to 40 ma 40 ma to 200 ma 200 ma to 2 A 2 A to 20 A 20 ppm + 1 na 20 ppm + 10 na 20 ppm + 75 na 50 ppm na 35 ppm na 250 ppm + 30 A 500 ppm ma Using nominal 10 shunt Generation only 100 ma to 202 ma 130 ppm A 202 ma to 2.02 A 150 ppm A 2.02 A to 20 A 420 ppm ma 20 A to 1500 A 0.22 % ma Simulation using a multi turn coil Assessment Manager: PC Page 10 of 15

11 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, DC RESISTANCE 0 to 2 15 ppm to ppm to ppm to 2 k 15 ppm m 2 k to 20 k 15 ppm + 15 m 20 k to 200 k 15 ppm m 200 k to 2 M 15 ppm M to 20 M 20 ppm M to 200 M 400 ppm M to 1 G 0.35 % + 12 k AC VOLTAGE 1 mv to 200 mv 20 Hz to 55 Hz 150 ppm +15 V 55 Hz to 10 khz 120 ppm + 15 V 10 khz to 30 khz 350 ppm + 16 V 30 khz to 100 khz 600 ppm + 20 V 200 mv to 2 V 20 Hz to 55 Hz 140 ppm + 40 V 55 Hz to 10 khz 120 ppm + 40 V 10 khz to 30 khz 260 ppm + 40 V 30 khz to 100 khz 350 ppm V 100 khz to 500 khz 0.65 % + 15 V AC VOLTAGE 2 V to 20 V 20 Hz to 55 Hz 150 ppm V 55 Hz to 10 khz 140 ppm V 10 khz to 30 khz 260 ppm V 30 khz to 100 khz 550 ppm mv 100 khz to 500 khz 0.75 % mv 20 V to 200 V 20 Hz to 10 khz 140 ppm + 7 mv 10 khz to 30 khz 260 ppm + 7 mv 30 khz to 100 khz 600 ppm + 15 mv 200 V to 1 kv 50 Hz to 10 khz 200 ppm + 25 mv 10 khz to 30 khz 380 ppm + 30 mv AC CURRENT 10 μa to 200 μa 55 Hz to 5 khz % + 50 na 5 khz to 10 khz % + 50 na 200 μa to 2 ma 55 Hz to 10 khz % na 2 ma to 20 ma 55 Hz to 10 khz % μa 20 ma to 200 ma 55 Hz to 10 khz % + 50 μa Assessment Manager: PC Page 11 of 15

12 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, AC CURRENT (continued) 200 ma to 2 A 55 Hz to 10 khz % μa 2 A to 20 A 55 Hz to 5 khz 0.20 % ma Generation 25 A to 202 A 40 Hz to 45 Hz 0.28 % na 45 Hz to 999 Hz % na 202 A to 2.02 ma 40 Hz to 45 Hz 0.22 % A 45 Hz to 999 Hz % A 2.02 ma to 20.2 ma 40 Hz to 45 Hz 0.23 % + 12 A 45 Hz to 999 Hz % A 20.2 ma to 202 ma 40 Hz to 45 Hz 0.22 % A 45 Hz to 999 Hz 0.94 % + 90 A 202 ma to 2.02 A 40 Hz to 45 Hz 0.25 % ma 45 Hz to 999 Hz 0.11 % ma 2.02 A to 20 A 40 Hz to 45 Hz 0.34 % + 13 ma 45 Hz to 999 Hz % ma 20 A to 100 A, 40 Hz to 60 Hz 0.25 % ma Simulation using a multi turn coil 100 A to 1500 A, 40 Hz to 60 Hz 0.25 % ma CAPACITANCE Generation 1 nf 29 pf 10 nf 58 pf 20 nf 92 pf 50 nf 190 pf 100 nf 360 pf 1 F 5.1 nf 10 F 74 nf 100 F 840 nf 1 mf 13 F 10 mf 130 F FREQUENCY Generation 0.01 Hz to 50 MHz 5.0 ppm 0.01 Hz to 50 MHz 8.0 ppm Frequency may also be expressed in terms of time; 1/f, for repetitive signals or in other units such as revolutions per minute. Assessment Manager: PC Page 12 of 15

13 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, RPM (Revolutions per minute) 2 rpm to 10 rpm 20 ppm rpm 10 rpm to 100 rpm 20 ppm rpm 100 rpm to 1000 rpm 20 ppm rpm rpm to rpm 20 ppm rpm rpm to rpm 20 ppm ppm TIME INTERVAL Longer than 100 ms 20 ppm ms Manually triggered single events. Longer than 80 ns 8 ppm + 80 ns Electronically triggered single events RCD Trip current 2 ma to 3 A 20 ms to 190 ms 5.8 % μa 2 ma to 3 A 190 ms to 5 s 1.4 % + 80 μa Trip time 20 ms to 400 ms 1.0 ms 400 ms to 5 s 10 ms AC resistance for Loop Laboratory loop Hz Nominal s 0.2 to to to 1 k 0.6% m 0.6% + 19 m 0.6% + 36 m Earth Bond Resistance 0 Ω to 10 Ω 10 Ω to 100 Ω 100 Ω to 1 kω 0.60 % mω 0.60 % + 19 mω 0.60 % + 36mΩ Earth bond current 10 ma to 500 ma 1.8 % ma 50 Hz 100 ma to 10 A 1.8 % + 70 ma 10 A to 30 A 1.8 % + 70 ma Load 0.13 kva 6.0 % Leakage Current At nominal 240 V 50 Hz 2 ma to 8 ma 1.8 % + 11 μa Insulation Test Voltage 50 V to 1000 V 1.2 % mv Insulation Resistance AC Voltage 10 kω to 100 kω 101 kω to 1 MΩ 1.01 MΩ to 10 MΩ 10.1 MΩ to 100 MΩ 101 MΩ to 1 GΩ 1.01 GΩ to 10 GΩ 0.12 % mω 0.12 % 1.2 % 1.2 % 1.4 % 7.0 % Nominal 50 Hz 100 V to 400 V 0.25 % mv Assessment Manager: PC Page 13 of 15

14 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, Continuity Resistance 20 mω to 1000 Ω 0.30 % + 30 mω Continuity Current At a nominal 1 Ω 10 ma to 300 ma 1.6 % ma ELECTRICAL SIMULATION OF TEMPERATURE Base Metal Thermocouples -200 C to C 0.10 C Noble Metal Thermocouples 500 C to 1800 C 0.11 C Type B (Noble) 500 C to 1800 C 0.28 C Type C 0 C to 2315 C 0.10 C Base Metal Thermocouples -200 C to C 0.25 C Noble Metal Thermocouples 500 C to 1800 C 0.26 C Type B (Noble) 500 C to 1800 C 0.43 C Cold Junction Compensation At ambient temperature of 20 C 0.15 C Excluding automatic CJC Including automatic CJC Pt 100 resistance thermometer simulation -200 C to +266 C C 266 C to 830 C C Pt 1000 resistance thermometer simulation -200 C to +266 C 266 C to 830 C C 0.13 C TEMPERATURE Temperature indicators and recorders, with temperature sensor(s) 0.01 C (Water Triple Point) -196 C (LN2) -80 C to +300 C 300 C to 450 C 450 C to 650 C C C C C C Platinum Resistance Thermometers (4 wire) 0.01 ºC (Water Triple Point) -196 C (LN2) -80 C to +300 C 300 C to 450 C 450 C to 650 C ºC C C C C Metal Block Calibrators and portable liquid baths -100 C to +100 C 100 C to 300 C 300 C to 420 C 420 C to 650 C 0 C C C 0.15 C 0.16 C C Suitable zero reference baths Assessment Manager: PC Page 14 of 15

15 2 Pine Trees, Cher t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, HUMIDITY Dew-point -25 C to +60 C 0.17 C Calibrations undertaken in an air chamber Temperature sensors in air 0 C to 60 C 0.10 C Relative humidity Example conditions Corresponding to above dew-point and temperature uncertainties At 0 C: 10 %rh to 90 %rh 0.20 %rh to 1.1 %rh At 23 C: 5 %rh to 95 %rh 0.20 %rh to 1.1 %rh At 60 C: 5 %rh to 90 %rh 0.20 %rh to 0.80 %rh END Assessment Manager: PC Page 15 of 15

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 050 Issue date: 11 September 2017 0310 DPN 175 Lammas Road Corby Northamptonshire NN17 5JF Contact: Mr S MacLeod Tel: +44 (0)1536

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metrology Division Contact: Mr K Pallett Calibration House Tel: +44 (0)1332 867 700 Castings Road E-Mail: sales@comech.co.uk Derby Website:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Avionic and Metrology Centre Unit G1/2 Treforest Industrial Estate Pontypridd CF37 5YL Contact: Mr P Ashurst Tel: +44 (0)1443 849970 Fax:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK The Calibration House Halesfield 7 Telford Shropshire TF7 4QL Contact: Mr R A Jones Tel: +44 (0) 1952 681 500 Fax: +44 (0) 118 927 6855 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bankhead Industrial Estate Contact: Miss Alexis Ross Bankhead Avenue Tel: +44 (0)1224 710033 Bucksburn Fax: +44 (0)1224 710099 Aberdeen E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PRESSURE Hydraulic Pressure (Gauge) Hewett Road Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 0NN Contact: Mr J Gunn Tel: +44

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Southern Calibration oratories Limited Issue No: 038 Issue date: 26 January 2018 Unit 7 Solent Industrial Estate Hedge End Southampton SO30

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratory locations: 19 Iris Road Rogerstone Newport NP10 9LE Contact: Mr R Bale Tel: +44 (0)1633 897225 Fax: +44 (0)1633 897225 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 6 Contact: Mr J Puttock Spectrum Business Estate Tel: +44 (0)1622 690187 Bircholt Road Fax: +44 (0)1622 678827 Parkwood E-Mail: jonputtock@aol.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 1 Wilson Street Contact: Mr Ibrahim Ibrahim Thornaby Tel: +44 (0) 1642 626148 Stockton-On-Tees Fax: +44 (0) 870 143 1869 TS17 7AR E-Mail: ibrahim@calibrate.co.uk United Kingdom Website: www.calibrate.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1 Cabot Business Village Holyrood Close oole Dorset BH17 7BA Contact: Mr Matthew Suter Tel: +44 (0)1202 658333 Fax: +44 (0)1202 659966

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK DC RESISTANCE 2 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ Contact: Mr A Robson Tel: +44 (0)1642-718900 Fax: +44 (0)1642-718909 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Measurement House Contact: Mr David Gray Kingsway Tel: +44 (0)1792 588722 Fforestfach Fax: +44 (0)1792 582624 Swansea E-Mail: mail@haven.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 3, Watt House Innovation Centre Pensnett Estate Kingswinford West Midlands DY6 7YD Contact: Mr A P Walker Tel: +44 (0)1384 401132 Fax: +44 (0)1384 400754 E-Mail: mail@quasartronics.com Website: www.quasartronics.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Schedule of ccreditation United Kingdom ccreditation Service ccredited to Parkburn Court Burnbank Hamilton Scotland ML3 0QQ Contact: Mr P Greenshields Tel: +44 (0)1698-829711 Fax: +44 (0)1698-828363 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK code Location code Customers Sites 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Yussof Taha Tel: +673-2-386475

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 029 Issue date: 05 pril 2017 ccredited to JLR Calibration Centre Building

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratory locations: Old Lane West Berkshire RG12 7AH Contact: Mr M Trotter Tel: +44 (0)1344 459314 Fax: +44 (0)1344 465556 E-Mail: martin.trotter@bsria.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Leigh Commerce Park Greenfold Way Leigh Greater Manchester WN7 3XJ Contact: Mr K Angus, Mr D Moore, Ms S Ward Tel: + 44 (0)125 253 3334 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 72 Manchester Road Kearsley Bolton BL4 8NZ Contact: Mr A Leonard Tel: +44 (0) 1204 571499 Fax: +44 (0) 1204 571734 E-Mail: enquiries@airflowmeasurements.com Website: www.airflowmeasurements.com AIR VELOCITY

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IE 17025:2005 Unit 3 24-26 Boulton Road Stevenage Hertfordshire SG1 4QX ontact: Mr G J Wilson Tel: +44 (0) 1438 900080 Fax: +44 (0) 1438

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ullman Instruments (UK) Ltd Chatsworth House Chatsworth Terrace Harrogate HG1 5HT Contact: Mr M Conboy Tel: +44 (0)1423 720360 Fax: +44 (0)1423

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK CET Structures Ltd. trading as CET Calibration M1 Commerce Park Markham Lane Duckmanton Chesterfield S44 5HS Contact: Mr Chris Locke Tel: +44 (0)1246 828318 Fax: +44 (0)1246 828319 E-Mail: chris.locke@cetcalibration.com

More information

TRACEABLE MEASUREMENT CAPABILITY

TRACEABLE MEASUREMENT CAPABILITY PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Standards & Calibration Laboratory Contact: Mr Martin Matthews Archcliffe Road Tel: +44 (0)1304 502121 Dover Fax: +44 (0)1304 502268 Kent

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 8 New Vision Business Park Glascoed Road St Asaph LL17 0LP Contact: Mr Alan Horner Tel: +44 (0)1492 550 398 E-Mail: alan.horner@mcs-testequipment.com

More information

This annex is valid from: to Replaces annex dated:

This annex is valid from: to Replaces annex dated: Premises: (Son) & Nijmegen LF 0 0 DC/LF Quantities LF 1 0 DC Voltage measuring and generating 10 V 5 10-7 U zenerreferences 1 V and 1.018 V 2.3 10-6 U zenerreferences 0 V to 10 V 0.3 V 10 V to 200 mv 3

More information

Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7.

Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7. IAS Accreditation Number CL-132 Accredited Entity Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain Contact Name Mr. Masood Khatib Mr. Raja Kalimuthu Telephone +973 17727450

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street

More information

Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm

Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm IAS Accreditation Number Company Name CL-154 Almeer Technical Services Calibration Laboratory Address Plot No. 100/104, Area 7 P.O. Box 9240 Ahmadi, 61003 Kuwait Contact Name Satyananda Rao, Technical

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR (Trading as Opus Metrology) ccredited to 15 Maylan Road Earlstrees Industrial Estate

More information

AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN

AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN This is to signify that AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN Calibration Laboratory CL-139 has met the requirements of the IAS Accreditation Criteria for Calibration

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate

More information

Deutsche Akkreditierungsstelle GmbH. Scope of Accreditation D-K to DIN EN ISO/IEC 17025:2005

Deutsche Akkreditierungsstelle GmbH. Scope of Accreditation D-K to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH to DIN EN ISO/IEC 17025:2005 Period of validity: 30.01.2018 to 27.10.2021 Date of issue: 30.01.2018 Certificate bearer: Testo Industrial Services GmbH Gewerbestraße

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 21-23 Campus Road Contact: Mr K G Dove Listerhills Science Park Tel: +44 (0)1274 393857 Bradford Fax: +44 (0)1274 393336 BD7 1HR E-Mail: sales@otc.co.uk

More information

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation Location(s) where activities are performed under accreditation Head Office Science Park Eindhoven 5108, Gebouw 2 5692 EC Son en Breugel The Netherlands Location Abbreviation/ location Science Park Eindhoven

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TesCom 2600 Longhorn Blvd., Ste. 112 Austin,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: December

More information

Hellenic Accreditation System. Annex F2/15 to the Certificate No SCOPE of ACCREDITATION

Hellenic Accreditation System. Annex F2/15 to the Certificate No SCOPE of ACCREDITATION Hellenic Accreditation System Annex F2/15 to the Certificate No. 345-3 SCOPE of ACCREDITATION of the Calibration laboratory of ALGOSYSTEMS S.A. Temperature/ Temperature block calibrators Temperature measurements

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-TEC, INC. 114 Thruway Park Road Broussard, LA 70518 Chris Grevemberg Phone: 337 839 0450 Email: lab@caltecinc.com CALIBRATION Valid

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z540.3

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z540.3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3 SIMCO ELECTRONICS (Ireland) Limited IDA Business & Technology Park Garrycastle, Dublin Rd Athlone Westmeath, Ireland

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Portland 14058 SW Milton Court Portland,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRANE LA CROSSE METROLOGY LAB 2313 20th Street South La Crosse, WI 54601 Rick McKenzie Phone: 608 787 4032 CALIBRATION Valid To: October

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA 92870 Roger Arnold Phone: 657 216 2600 CALIBRATION Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INCO-LABS Plot No. 151, Block No.1 Street No. 101 North Subhan, Safat, Kuwait 13071 Abdulaziz A. Al-Obaidan Phone: 00965-2475 2330 CALIBRATION Valid To: December

More information

CERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)

CERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 QUALITY SYSTEMS LAB, INC. 7604 North West 6 th Ave Boca Raton, FL 33487 Bryan Wilkerson Phone: 561-999-1896 CALIBRATION

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Instrument Company, Inc. 332 North Fries

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METROCAL, INC 3631 44 th Street SE, Suite B Kentwood, MI 49512 Kent Anderson Phone: 616 698 3124 CALIBRATION Valid To: September 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 HAYES INSTRUMENT SERVICE, INC. 530 Boston Road Billerica, MA 01821 Tony Ganchi Phone: 978 663 4800 CALIBRATION Valid until: January

More information

Dimensional Micrometer 0 to 25 mm / mm mm Grade 1 Gauge Block Caliper- External 0 to 150 mm / 0.01 mm

Dimensional Micrometer 0 to 25 mm / mm mm Grade 1 Gauge Block Caliper- External 0 to 150 mm / 0.01 mm IAS Accreditation Number CL-169 Accredited Entity Address Shop No. 8, Building No. 15, Barwa Village, P.O. Box 15481 Doha, Qatar Contact Name Herbert S. Tarun, Operations Manager Telephone +974 40299729

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 SIMCO SCIENTIFIC INSTRUMENT REPAIR AND CALIBRATION SERVICES CO., LTD. Flat 404 North Software Tower, NanSha IT Park Panyu NanSha, Guangzhou,

More information

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in

More information

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 19

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 19 Calibration Laboratory Assessment Service CLAS Certificate Number 2000-03 Page 1 of 19 Transmation Canada nc. 916 Gateway Canada L7L 5K7 Contact: Robert Whittaker Tel (905) 632-5869 Toll Free (800) 897-0067

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 DIGITAL MEASUREMENT METROLOGY INC. (A TRESCAL COMPANY) 26 Automatic Road, Unit 4 Brampton, Ontario, CANADA L6S 5N7 Nana Mantey Phone:

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TECHMASTER ASIA (Thailand) Co., Ltd 5/41

More information

For the National Voluntary Laboratory Accreditation Program

For the National Voluntary Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Transcat San Juan 281 Calle Matadero Urb Puerto Nuevo San Juan, PR 00920 Mr. Brian Samuelson Phone: 787-706-8855 Fax: 787-792-3614 E-mail: bsamuelson@transcat.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 CONSUMERS ENERGY/LABORATORY SERVICES Laboratory Services 135 West Trail Street Jackson, MI 49201 Nick Serafin Phone: 517 788 2238 naserafin@cmsenergy.com

More information

Up to 1600 kg/1 kg. Precision Balance - Make: Kern, Model: DS 36K0.5 Mechanical Analytical Balances (On site

Up to 1600 kg/1 kg. Precision Balance - Make: Kern, Model: DS 36K0.5 Mechanical Analytical Balances (On site IAS Accreditation Number CL-161 Accredited Entity Address Gate 1006, Villa: 2, Road 3221 Mahooz 332, P.O. Box 728 Kingdom of Bahrain Contact Name K. T. Noushad, General Manager Telephone +973 17720117

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that OCS Technologies, Inc. (dba: Ohio Counting

More information

110 to 330 Ω/ Ω 20 mω 330 to 1.1 kω/0.001 Ω 20 mω. 110 to 330 kω/0.1 Ω 12.8 Ω. 33 to 110 kω/0.1 Ω 4.1 Ω

110 to 330 Ω/ Ω 20 mω 330 to 1.1 kω/0.001 Ω 20 mω. 110 to 330 kω/0.1 Ω 12.8 Ω. 33 to 110 kω/0.1 Ω 4.1 Ω IAS Accreditation Number Accredited Entity Address CL-178 Qatar Calibration Services WLL, (QCAL) QP West Services Area Ghuwairiya, St IR #1 Ras Laffan Doha, PO Box 16069, State of Qatar Shreenivasa T R,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: May 31,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX CANADA 400 Britannia Road E, Unit 2 Mississauga, Ontario L4Z 1X9 Canada Andrew Sweeny Phone: 905 241 3021 CALIBRATION Valid

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Pte. Ltd. Blk

More information

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that DGI Metrology/Dimensional Gauge Company 2144

More information

CALIBRATION & MEASUREMENT CAPABILITY 1 (CMC) (±) 0.5 C 0.05 C C 0.37 C 0.15 C 0.86 C C %Rh 0.95 %Rh 1.2 %Rh 0.085% IR 0.

CALIBRATION & MEASUREMENT CAPABILITY 1 (CMC) (±) 0.5 C 0.05 C C 0.37 C 0.15 C 0.86 C C %Rh 0.95 %Rh 1.2 %Rh 0.085% IR 0. IAS Accreditation Number CL-159 Accredited Entity Address P.O. Box 31862 Al Khobar 31952 Kingdom of Saudi Arabia Contact Name Arnold Arevalo Quality Manager Telephone +966-13-8571899 Effective Date of

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 7323 Tom Drive Baton Rouge, LA 70806 Jerry Kraus Phone: 225 925 2029 x3028 CALIBRATION

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Babcock International Group PC1409, Devonport Royal Dockyard Plymouth Devon PL1 4SG Contact: Mr C Burrow Tel: +44 (0)1752 324739 Fax: +44

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FUGRO SUHAIMI LIMITED, YANBU P.O. Box 31720 Yanbu Al-Sinaiyah-41912, Kingdom of Saudi Arabia Mohammed Baquer Hameed Phone: 009663 857

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA Roger Arnold Phone: CALIBRATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA Roger Arnold Phone: CALIBRATION SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA 92870 Roger Arnold Phone: 657 216 2600 CALIBRATION Valid To: December 31, 2017 Certificate Number: 4296.01

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wilmington Instrument Company, Inc. 332 North

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,

More information

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INNOVATECIS CIA LTD. General Jose Maria Guerrero N69-170 y Alfonso del Hierro Quito, Ecuador 170103 Diego Almeida Phone: 593 260 40607 CALIBRATION Valid To:

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 EXPHIL CALIBRATION LABS, INC. 415 Central Avenue Bohemia, NY 11716 Steven Pidd Phone: 631 563 3520 CALIBRATION

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CASCADE ENGINEERING SERVICES, INC. 6640 185th Ave NE Redmond WA 98052 Contact: Charles Heidlage Phone: 425 895 8617 x 713 CALIBRATION

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that Productivity Quality, Inc./Advanced Inspection Services, LLC 15150

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 G.T. MICHELLI COMPANY, INC. 130 Brookhollow Esplanade Harahan, LA 70123 Patrick Jester Phone: 504 733 9822 CALIBRATION Valid To: May

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Vietnam LTD.

More information

President For the Accreditation Council Certificate Number Valid to January 31, 2010

President For the Accreditation Council Certificate Number Valid to January 31, 2010 A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY HAYES INSTRUMENT SERVICE, INC. Billerica, MA for technical competence in the field of Calibration This laboratory

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONNECTICUT CALIBRATION LABS 327 S. Main Street Newtown, CT 06470 Joseph Zeolla Phone: 203 270 1263 CALIBRATION Valid To: October 31,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EXPHIL CALIBRATION LABS, INC. 415 Central Avenue Bohemia, NY 11716 Steven Pidd Phone: 631 563 3520 CALIBRATION Valid To: October 31,

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wintronics, Inc. 50 Division Ave Millington,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX INC. 8020 Southpark Circle, Suite 300 Littleton, CO 80120 William Gottbreht Phone: 303 539 1400 CALIBRATION Valid To: September

More information