Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7.
|
|
|
- Ezra Craig
- 6 years ago
- Views:
Transcription
1 IAS Accreditation Number CL-132 Accredited Entity Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain Contact Name Mr. Masood Khatib Mr. Raja Kalimuthu Telephone Effective Date of Scope October 19, 2017 Accreditation Standard ISO/IEC 17025:2005 CALIBRATION TECHNIQUE, REFERENCE STANDARD, Dial Calipers, Vernier Calipers, Digital Calipers Dial Depth Vernier Depth Digital Depth Inside Dial, Inside Dial Caliper, Outside Dial, Outside Dial Caliper Outside Micrometers Inside Micrometers Dimensional 0 mm to 300 mm / 0.01 mm 6.7 µm Using Slip Set 300 mm to 600 mm / 0.01 mm 7.8 µm Caliper Checker & Slip 600 mm to 1000 mm / µm Accessories by mm comparison Method as per SOP : CP-D-01 0 mm to 600 mm / 0.01 mm 7.7 µm Using Slip Set by comparison Method as per SOP : CP-D-02 0 mm to 300 mm / 0.01 mm 5.6 µm Using Slip Set & Slip Accessories by comparison Method as per SOP : CP-D-03 0 mm to 600 mm / mm 5.8 µm Using Slip Set 600 mm to 1000 mm / µm by comparison Method mm as per SOP : CP-D-04 Using Slip Set 0 mm to 600 mm / 0.01 mm 7.8 µm & Slip Accessories by comparison Method as per SOP : CP-D-05 Depth Micrometers Up to 600 mm / 0.01 mm 10 µm Using Slip Set International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 13
2 Coating Thickness (Ferrous & Non Ferrous) 25 µm to 1028 µm 2.4 µm Caliper Checker & Slip Accessories by comparison Method as per SOP : CP-D-06 Using Master Foils by comparison Method as per SOP : CP-D-07 Feeler Up to 2 mm 3 µm Using Digimatic Micrometer by comparison Method as per SOP : CP-D-08 Using Slip Set Dial / Digital Up to 50 mm / mm Thickness s 1.5 µm by comparison Method as per SOP : CP-D-10 Using Slip Set Dial Height, Vernier Height, Digital Height Up to 1000 mm / mm 11.7 µm Caliper Checker & Slip Accessories by comparison Method as per SOP : CP-D-12 Up to 10 mm / mm 3.1 µm Using Dial Indicator Dial Indicators Calibrator >10 to 100 mm / 0.01 mm 5.8 µm by comparison Method as per SOP : CP-D-13 Mechanical Pressure s, 0 bar to 7 bar 0.030% RDG Using Pressure Pressure Calibrators, Pressure Switches, 7 bar to 70 bar 0.036% RDG Calibrator, Dead Weight Tester by Direct / Comparison Pressure Method 70 bar to 700 bar 0.031% RDG Transmitters, as per SOP : CP-P-01, Pressure Relief 02, 03, 04, 07 Valve Low Pressure (Pneumatic) Low pressure, Low pressure mm-h2o to 2000 mm- H2O / 1 mm-h2o 0.15% RDG Using Low Pressure Calibrator as per SOP : CP-P-06 CL-132, Page 2 of 13
3 Calibrator, Maghnelic, Low Pressure Transmitter Absolute Pressure (Pneumatic) Absolute Pressure, Manometer, Barometer, Pressure Calibrators, Pressure Transmitters Dial Vacuum s, Digital Vacuum s, Digital Vacuum Calibrators, Vacuum Switches Vacuum, Transmitters Weights 200 mbar to 2000 mbar / 0.1 mbar 0.037% RDG 0 bar to -0.9 bar 0.18% RDG Using Abs. Pressure calibrator as per SOP : CP-P-05 for Barometer, CP-P-06 for Manometer, CP-P-02 for Pressure/Vacuum Calibrator, CP-P-03 for Pressure/Vacuum Transmitter. Using Pressure Calibrator, as per SOP : CP-P-01 for Pressure/Vacuum s, CP-P-02 for Pressure/Vacuum Calibrator, CP-P-03 for Pressure/Vacuum Transmitter, CP-P-06 for Pressure/Vacuum Switch. 1 mg to 100 mg mg Using E2 Class Weights & Balances as per SOP : CP-M-01 >100 mg to 10 g 0.03 mg >10 g to 50 g 0.08 mg >50 g to 200 g 0.22 mg >200 g to 1000 g 1.75 mg 2 kg, 5 kg and 10 kg 15.2 mg 20 kg 0.13 g Using F1 Class Weights & Balances as per SOP: CP-M-01 CL-132, Page 3 of 13
4 0 to 200 g / g 0.15 mg Using E2 Class Weights, SOP : CP-M-02 0 to 500 g / g 1.2 mg Using E2 Class Weights, SOP : CP-M-02 Weighing Balance 0 to 2 kg / 0.01 g 9.8 mg Using E2 Class Weights, SOP : CP-M-02 0 to 40 kg / 0.1 g 0.81 g Using E2 & F1 Class Weights, SOP : CP-M-02 0 to 200 kg / 50 g 40 g Using E2 & F1 Class Weights, SOP : CP-M-02 0 to 3000 kg / 1 kg 0.58 kg Using F1 & M1 Class Weights, SOP : CP-M µl to 100 ml 0.3 µl Using Balances Volume by Gravimetric Method 10 ml to 1000 ml 0.3 ml as per SOP : CP-M-03 Up to 100 Nm / 0.1 Nm 1.62% RDG Using Torque Wrench Torque Wrench, Calibrator Torque Screw Driver, Torque >100 to 1000 Nm / 0.1 Nm 1.20% RDG as per Dial SOP : CP-MH-01 Using Load Cell with Indicator Compression Force Up to 3000 kn 0.29% RDG as per SOP : CP-MH-02 Using Sound Level Sound Calibrator 94 db & 114 db 0.42 db Sound Level Meter SOP : CP-MH to RPM 0.02% RDG Speed (RPM) Tachometer (Non to RPM 0.04% RDG by Direct Method Contact) as per SOP : CP-MH-09 Using Digital Tachometer Rotational Speed Up to rpm / 0.1 & 1 rpm 0.022% RDG by Direct Method as per SOP : CP-MH-10 4 ph ph Using Certified 7 ph ph Reference Buffer ph Meter 10 ph ph Solutions by Direct Method as per SOP : CP- MH-08 Electrical/DC/Low Frequency CL-132, Page 4 of 13
5 DC Voltage - DC Current - DC Resistance - AC Voltage 50/60 50/60 Hz Frequency - Capacitance - 10 mv to 100 mv / 100 nv % RDG Using Digital Precision 0.1 V to 1 V / 1 µv % RDG 1 V to 10 V / 10 µv % RDG 10 V to 100 V / 100 µv % RDG 100 V to 1000 V / 1 mv % RDG 10 µa to 100 µa / 100 pa 0.11% RDG 0.1 ma to 1 ma / 1 na 0.09% RDG 1 ma to 10 ma / 10 na 0.08% RDG Using Digital Precision 10 ma to 100 ma / 100 na 0.07% RDG 100 ma to 400 ma / 1 µa 0.09% RDG 0.4 A to 1 A / 1 µa 0.12% RDG 1 A to 3 A / 10 µa 0.21% RDG 3 A to 10 A / 10 µa 0.28% RDG Up to 10 Ω / 10 µω 0.055% RDG 10 Ω to 100 Ω / 100 µω 0.018% RDG 0.1 kω to 1 kω / 1 mω 0.014% RDG Using Digital Precision 1 kω to 10 kω / 10 mω 0.014% RDG 10 kω to 100 kω / 100 mω 0.015% RDG 0.1 MΩ to 1 MΩ / 1 Ω 0.016% RDG 1 MΩ to 10 MΩ / 10 Ω 0.085% RDG 10 MΩ to 100 MΩ / 100 Ω 0.94% RDG 0.1 GΩ to 1 GΩ / 1 kω 2.32% RDG 10 mv to 100 mv / 100 nv 0.13% RDG Using Digital Precision 0.1 V to 1 V / 1 µv 0.11% RDG 1 V to 10 V / 10 µv 0.11% RDG 10 V to 100 V / 100 µv 0.11% RDG 100 V to 1000 V / 1 mv 0.10% RDG 30 µa to 100 µa / 100 pa 0.32% RDG 0.1 ma to 1 ma / 1 na 0.21% RDG 1 ma to 10 ma / 10 na 0.26% RDG Using Digital Precision 10 ma to 100 ma / 100 na 0.18% RDG 100 ma to 400 ma / 1 µa 0.24% RDG 0.4 A to 1 A / 1 µa 0.19% RDG 1 A to 3 A / 10 µa 0.29% RDG 3 A to 10 A / 10 µa 0.26% RDG 10 Hz to 40 Hz / 100 µhz 0.038% RDG Using Digital Precision 40 Hz to 300 khz / 100 mhz 0.023% RDG 300 khz to 1 MHz / 10 mhz 0.060% RDG 1 nf to 10 nf / 10 pf 0.089% RDG Using Digital Precision 10 nf to 100 nf / 100 pf 0.089% RDG CL-132, Page 5 of 13
6 DC High Voltage nf to 1 µf / 1 nf 0.083% RDG 1 µf to 10 µf / 10 nf 0.083% RDG 10 µf to 100 µf / 100 nf 0.083% RDG 100 µf to 1 mf / 1 µf 0.083% RDG 1 mf to 10 mf / 10 µf 0.083% RDG 10 mf to 100 mf / 100 µf 0.083% RDG 1 kv to 40 kv 0.09% RDG Using High Voltage Divider as per SOP : CP-E-11 Using High Voltage Probe AC High Voltage - 1 kv to 25 50/60 Hz 5.80% RDG with Digital Multimeter SOP : CP-E-11 Stop Watch 24 hr. / 0.01 sec. 1 sec. per 2 hr. as per SOP CP-E-15 0 mv to 330 mv / 100 nv % RDG Electrical Source 0.33 V to 3.3 V / 1 µv % RDG DC Voltage V to 33 V / 10 µv % RDG 33 V to 330 V / 100 µv % RDG 330 V to 1000 V / 1 mv % RDG 0 µa to 330 µa / 1 na 0.025% RDG 0.33 ma to 3.3 ma / 10 na 0.014% RDG 3.3 ma to 33 ma / 100 na 0.014% RDG 33 ma to 330 ma / 1 µa 0.013% RDG 0.33 A to 1.1 A / 10 µa 0.028% RDG DC Current A to 3 A / 10 µa 0.046% RDG 3 A to 11 A / 100 µa 0.063% RDG 11 A to 20 A / 100 µa 0.12% RDG 20 A to 150 A / 100 µa 150 A to 1000 A / 100 µa 0.70% RDG 0.65% RDG Using Current Coil as per SOP : CP-E-02 DC Resistance - Fixed Points 50 µω 0.94% RDG 100 µω 0.93% RDG 150 µω 0.93% RDG 200 µω 0.93% RDG 0.5 mω 0.61% RDG 1 mω 0.59% RDG 1.5 mω 0.59% RDG 2 mω 0.65% RDG 5 mω 0.27% RDG Using Micro ohm Calibrator (Time Electronics 5070) SOP : CP-E-05 CL-132, Page 6 of 13
7 DC Resistance - AC Voltage (1 mv to 33 mv/ 1 µv) AC Voltage 10 mω 0.25% RDG 15 mω 0.24% RDG 20 mω 0.38% RDG 50 mω 0.18% RDG 100 mω 0.14% RDG 150 mω 0.13% RDG 200 mω 0.13% RDG 0.5 Ω 0.18% RDG 1 Ω 0.14% RDG 1.5 Ω 0.13% RDG 2 Ω 0.13% RDG 0 µω to 11 Ω / 100 µω 0.016% RDG 11 Ω to 33 Ω / 100 µω 0.009% RDG 33 Ω to 110 Ω / 100 µω 0.007% RDG 110 Ω to 330 Ω / 100 µω 0.005% RDG 0.33 kω to 1.1 kω / 1 mω 0.007% RDG 1.1 kω to 3.3 kω / 1 mω 0.005% RDG 3.3 kω to 11 kω / 10 mω 0.007% RDG 11 kω to 33 kω / 10 mω 0.005% RDG 33 kω to 110 kω / 100 mω 0.007% RDG 110 kω to 330 kω / 100 mω 0.005% RDG 0.33 MΩ to 1.1 MΩ / 1 Ω 0.007% RDG 1.1 MΩ to 3.3 MΩ / 1 Ω 0.010% RDG 3.3 MΩ to 11 MΩ / 10 Ω 0.017% RDG 11 MΩ to 33 MΩ / 10 Ω 0.038% RDG 33 MΩ to 110 MΩ / 100 Ω 0.062% RDG 110 MΩ to 330 MΩ / 1 kω 0.38% RDG 330 MΩ to 900 MΩ 1.170% RDG Using Insulation Tester 900 MΩ to 9 GΩ 1.160% RDG Calibrator 9 GΩ to 100 GΩ 5.780% RDG (Time Electronics 5069) By Direct Method & CP-E to 45 Hz 0.12% RDG 45 Hz to 10 khz 0.04% RDG 10 to 20 khz 0.05% RDG 20 to 50 khz 0.14% RDG 50 to 100 khz 0.45% RDG 100 to 500 khz 1.10% RDG 10 to 45 Hz 0.04% RDG 45 Hz to 10 khz 0.02% RDG CL-132, Page 7 of 13
8 (33 mv to 330 mv / 1 µv) AC Voltage (0.33 V to 3.3 V / 10 µv) AC Voltage (3.3 V to 33 V / 100 µv) AC Voltage (33 V to 330 V / 1 mv) AC Voltage (330 V to 1020 V / 10 mv) (33 µa to 330 µa / 10 na) (0.33 ma to 3.3 ma / 10 na) (3.3 ma to 33 ma / 100 na) 10 to 20 khz 0.03% RDG 20 to 50 khz 0.05% RDG 50 to 100 khz 0.11% RDG 100 to 500 khz 0.26% RDG 10 to 45 Hz 0.04% RDG 45 Hz to 10 khz 0.02% RDG 10 to 20 khz 0.03% RDG 20 to 50 khz 0.04% RDG 50 to 100 khz 0.09% RDG 100 to 500 khz 0.30% RDG 10 to 45 Hz 0.04% RDG 45 Hz to 10 khz 0.02% RDG 10 to 20 khz 0.03% RDG 20 to 50 khz 0.04% RDG 50 to 100 khz 0.11% RDG 45 Hz to 1 khz 0.023% RDG 1 to 10 khz 0.026% RDG 10 to 20 khz 0.032% RDG 20 to 50 khz 0.039% RDG 50 to 100 khz 0.25% RDG 45 Hz to 1 khz 0.036% RDG 1 to 5 khz 0.030% RDG 5 to 10 khz 0.036% RDG 10 to 20 Hz 0.27% RDG 20 to 45 Hz 0.21% RDG 45 Hz to 1 khz 0.18% RDG 1 to 5 khz 0.40% RDG 5 to 10 khz 1% RDG 10 to 30 khz 1% RDG 10 to 20 Hz 0.24% RDG 20 to 45 Hz 0.15% RDG 45 Hz to 1 khz 0.12% RDG 1 to 5 khz 0.24% RDG 5 to 10 khz 0.59% RDG 10 to 30 khz 1.18% RDG 10 to 20 Hz 0.24% RDG 20 to 45 Hz 0.15% RDG 45 Hz to 1 khz 0.12% RDG 1 to 5 khz 0.14% RDG CL-132, Page 8 of 13
9 (33 ma to 330 ma / 1 µa) (0.33 A to 1.1 A / 10 µa) (1.1 A to 3 A / 10 µa) (3 A to 11 A / 100 µa) (11 A to 20.5 A / 100 µa) (20 A to 150 A / 100 µa) (150 A to 1000 A / 100 µa) Frequency - Capacitance - 5 to 10 khz 0.26% RDG 10 to 30 khz 0.49% RDG 10 to 20 Hz 0.24% RDG 20 to 45 Hz 0.15% RDG 45 Hz to 1 khz 0.11% RDG 1 to 5 khz 0.16% RDG 5 to 10 khz 0.28% RDG 10 to 30 khz 0.54% RDG 10 to 45 Hz 0.24% RDG 45 Hz to 1 khz 0.12% RDG 1 to 5 khz 0.81% RDG 5 to 10 khz 3.40% RDG 10 to 45 Hz 0.24% RDG 45 Hz to 1 khz 0.13% RDG 1 to 5 khz 0.74% RDG 5 to 10 khz 3.10% RDG 45 Hz to 100 Hz 0.10% RDG 100 Hz to 1 khz 0.14% RDG 1 to 5 khz 3.50% RDG 45 Hz to 100 Hz 0.19% RDG 100 Hz to 1 khz 0.22% RDG 1 to 5 khz 3.50% RDG 45 Hz to 65 Hz 0.88% RDG 45 Hz to 65 Hz 0.78% RDG 10 Hz to 2 MHz / 10^ % to 0.001% RDG 0.19 nf to 1.1 nf / 0.1 pf 1.16% RDG 1.1 nf to 3.3 nf / 0.1 pf 0.93% RDG 3.3 nf to 11 µf / 1 pf 0.40% RDG 11 µf to 11 mf / 10 nf 0.63% RDG 11 mf to 33 mf / 100 nf 0.97% RDG 33 mf to 110 mf / 10 µf 1.38% RDG Using Current Coil as per SOP : CP-E-02 CL-132, Page 9 of 13
10 DC Power - AC Power 45 to 65 Hz, UPF Phase 10 to 65 Hz Type B Type C Type E Type J Type K Type L Type N 1 mw to 1 W / 0.1 mw 0.60% RDG 1 W to 330 W / 0.1 W 0.60% RDG 330 W to 3 kw / 1 W 0.21% RDG 3 kw to 20 kw / 1 W 0.09% RDG SOP : CP-E-09 1 mw to 1 W / 0.1 mw 1.30% RDG 1 W to 330 W / 0.1 W 1.30% RDG 330 W to 3 kw / 1 W 1.40% RDG 3 kw to 20 kw / 1 W 0.26% RDG SOP : CP-E-09 0 to by Direct Method as per SOP : CP-E C to 800 C / 0.01 C 0.44 C >800 C to 1000 C / 0.01 C 0.34 C >1000 C to 1550 C / 0.01 C 0.30 C >1550 C to 1820 C / 0.01 C 0.33 C 0 C to 150 C / 0.01 C 0.30 C >150 C to 650 C / 0.01 C 0.26 C >650 C to 1000 C / 0.01 C 0.31 C >1000 C to 1800 C / 0.01 C 0.50 C >1800 C to 2316 C / 0.01 C 0.84 C -250 C to -100 C / 0.01 C 0.50 C >-100 C to -25 C / 0.01 C >-25 C to 350 C / 0.01 C 0.14 C >350 C to 650 C / 0.01 C >650 C to 1000 C / 0.01 C 0.21 C -210 C to -100 C / 0.01 C 0.27 C >-100 C to -30 C / 0.01 C >-30 C to 150 C / 0.01 C 0.14 C >150 C to 760 C / 0.01 C 0.17 C >760 C to 1200 C / 0.01 C 0.23 C -200 C to -100 C / 0.01 C 0.33 C >-100 C to -25 C / 0.01 C 0.28 C >-25 C to 120 C / 0.01 C 0.22 C >120 C to 1000 C / 0.01 C >1000 C to 1372 C / 0.01 C 0.08 C -200 C to -100 C / 0.01 C 0.37 C >-100 C to 800 C / 0.01 C 0.26 C >800 C to 900 C / 0.01 C 0.17 C -200 C to -100 C / 0.01 C 0.40 C >-100 C to -25 C / 0.01 C 0.22 C >-25 C to 120 C / 0.01 C 0.19 C CL-132, Page 10 of 13
11 Type R Type S Type T Type U RTD Pt 100 (385) RTD Pt 200 (385) RTD Pt 500 (385) RTD Pt 1000 (385) Type B Type C Type E >120 C to 410 C / 0.01 C 0.18 C >410 C to 1300 C / 0.01 C 0.27 C 0 C to 250 C / 0.01 C 0.57 C >250 C to 400 C / 0.01 C 0.35 C >400 C to 1000 C / 0.01 C 0.33 C >1000 C to 1767 C / 0.01 C 0.40 C 0 C to 250 C / 0.01 C 0.47 C >250 C to 1000 C / 0.01 C 0.36 C >1000 C to 1400 C / 0.01 C 0.37 C >1400 C to 1767 C / 0.01 C 0.46 C -250 C to -150 C / 0.01 C 0.63 C >-150 C to 0 C / 0.01 C 0.24 C >0 C to 120 C / 0.01 C >120 C to 400 C / 0.01 C 0.14 C -200 C to 0 C / 0.01 C 0.56 C >0 C to 600 C / 0.01 C 0.27 C -200 C to 100 C / C 0.12 C 100 C to 600 C / C 0.29 C -200 C to 100 C / C 0.12 C 100 C to 600 C / C 0.31 C -200 C to 100 C / C 0.12 C 100 C to 600 C / C 0.28 C -200 C to 100 C / C 0.11 C 100 C to 600 C / C 0.26 C 600 C to 800 C / 0.01 C 0.44 C >800 C to 1000 C / 0.01 C 0.34 C >1000 C to 1550 C / 0.01 C 0.30 C >1550 C to 1820 C / 0.01 C 0.33 C 0 C to 150 C / 0.01 C 0.30 C >150 C to 650 C / 0.01 C 0.26 C >650 C to 1000 C / 0.01 C 0.31 C >1000 C to 1800 C / 0.01 C 0.50 C >1800 C to 2316 C / 0.01 C 0.84 C -250 C to -100 C / 0.01 C 0.50 C >-100 C to -25 C / 0.01 C >-25 C to 350 C / 0.01 C 0.14 C >350 C to 650 C / 0.01 C >650 C to 1000 C / 0.01 C 0.21 C -210 C to -100 C / 0.01 C 0.27 C >-100 C to -30 C / 0.01 C CL-132, Page 11 of 13
12 Type J >-30 C to 150 C / 0.01 C 0.14 C >150 C to 760 C / 0.01 C 0.17 C >760 C to 1200 C / 0.01 C 0.23 C -200 C to -100 C / 0.01 C 0.33 C >-100 C to -25 C / 0.01 C 0.28 C >-25 C to 120 C / 0.01 C 0.22 C Type K >120 C to 1000 C / 0.01 C >1000 C to 1372 C / 0.01 C 0.08 C -200 C to -100 C / 0.01 C 0.37 C >-100 C to 800 C / 0.01 C 0.26 C Type L >800 C to 900 C / 0.01 C 0.17 C Type N Type R Type S Type T Type U RTD (PT-395, 100Ω) RTD / Thermocouple / Temp. Indicator with sensor / Temperature s -200 C to -100 C / 0.01 C 0.40 C >-100 C to -25 C / 0.01 C 0.22 C >-25 C to 120 C / 0.01 C 0.19 C >120 C to 410 C / 0.01 C 0.18 C >410 C to 1300 C / 0.01 C 0.27 C 0 C to 250 C / 0.01 C 0.57 C >250 C to 400 C / 0.01 C 0.35 C >400 C to 1000 C / 0.01 C 0.33 C >1000 C to 1767 C / 0.01 C 0.40 C 0 C to 250 C / 0.01 C 0.47 C >250 C to 1000 C / 0.01 C 0.36 C >1000 C to 1400 C / 0.01 C 0.37 C >1400 C to 1767 C / 0.01 C 0.46 C -250 C to -150 C / 0.01 C 0.63 C >-150 C to 0 C / 0.01 C 0.24 C >0 C to 120 C / 0.01 C >120 C to 400 C / 0.01 C 0.14 C -200 C to 0 C / 0.01 C 0.56 C >0 C to 600 C / 0.01 C 0.27 C -200 to 800 C / 0.01 C 0.09 C -20 C to 150 C / C 0.14 C Using Digital Reference Thermometer & Liquid Bath as per SOP : CP-T-01 for RTD/Thermocouple, CP-T-02 for Temperature. CP-T-03 for Temperature CL-132, Page 12 of 13
13 Liquid-in-Glass Thermometer Temperature Bath / Dry Block Infrared Thermometer / Thermal Imager / Pyrometer Chiller/ Autoclave/Freezer/ Refrigerator/ Incubator/Oven / Chamber/Furnace Humidity Indicator with sensor. Using Digital Reference -20 C to 150 C / 0.01 C 0.18 C Thermometer & Liquid Bath as per SOP : CP-T C to 0 C 0.61 C Using Dig. Reference 0 C to 600 C 0.59 C Thermometer / Thermocouple & Precision Multimeter 600 C to 1200 C 1.58 C as per as per SOP : CP-T C to 350 C / 0.01 C 1.52 C Using PRT with Radiation 350 C to 450 C / 0.01 C 2.02 C Source 450 C to 550 C / 0.01 C 3.01 C as per SOP : CP-T C to 0 C 0.61 C Using Dig. Reference 0 C to 600 C 0.82 C Thermometer / Thermocouple & Data 600 C to 1200 C 1.68 C Logger as per SOP : CP-T-08 Using Standard Thermo 20% to 90% RH / 0.01% RH Hygrometer 1.0% 10 C to 50 C as per SOP : CP-T-09 & 10 * Calibration and ment Capability is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation (at a confidence level of 95% with a coverage factor of 2) CL-132, Page 13 of 13
CALIBRATION & MEASUREMENT CAPABILITY 1 (CMC) (±) 0.5 C 0.05 C C 0.37 C 0.15 C 0.86 C C %Rh 0.95 %Rh 1.2 %Rh 0.085% IR 0.
IAS Accreditation Number CL-159 Accredited Entity Address P.O. Box 31862 Al Khobar 31952 Kingdom of Saudi Arabia Contact Name Arnold Arevalo Quality Manager Telephone +966-13-8571899 Effective Date of
Dimensional Micrometer 0 to 25 mm / mm mm Grade 1 Gauge Block Caliper- External 0 to 150 mm / 0.01 mm
IAS Accreditation Number CL-169 Accredited Entity Address Shop No. 8, Building No. 15, Barwa Village, P.O. Box 15481 Doha, Qatar Contact Name Herbert S. Tarun, Operations Manager Telephone +974 40299729
Up to 1600 kg/1 kg. Precision Balance - Make: Kern, Model: DS 36K0.5 Mechanical Analytical Balances (On site
IAS Accreditation Number CL-161 Accredited Entity Address Gate 1006, Villa: 2, Road 3221 Mahooz 332, P.O. Box 728 Kingdom of Bahrain Contact Name K. T. Noushad, General Manager Telephone +973 17720117
Mechanical 0.3% 1 to 9999 RPM 1% of reading Tachometer. Up to 24 hours/0.01 Sec 1 Sec Master Stopwatch and Manual Comparison Chemical
IAS Accreditation Number Accredited Entity Address CL-138 & Equipment Service Centre Main Office: Industrial Area, Street No.2, Opp. Bosch Car Service, Po. Box 40570, Doha Qatar Nuclear Gauge Calibration:
IAS Accreditation Number RICI Muhammad Abdullah Al-Azzaz Company Limited Address P.O. Box Al-Khobar 31952
IAS Accreditation Number CL-151 Accredited Entity RICI Muhammad Abdullah Al-Azzaz Company Limited Address P.O. Box 31172 Al-Khobar 31952 Contact Name Muhammad Jawad Ali Technical Manager Telephone +966-13-8346304/
Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm
IAS Accreditation Number Company Name CL-154 Almeer Technical Services Calibration Laboratory Address Plot No. 100/104, Area 7 P.O. Box 9240 Ahmadi, 61003 Kuwait Contact Name Satyananda Rao, Technical
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INCO-LABS Plot No. 151, Block No.1 Street No. 101 North Subhan, Safat, Kuwait 13071 Abdulaziz A. Al-Obaidan Phone: 00965-2475 2330 CALIBRATION Valid To: December
AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN
This is to signify that AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN Calibration Laboratory CL-139 has met the requirements of the IAS Accreditation Criteria for Calibration
110 to 330 Ω/ Ω 20 mω 330 to 1.1 kω/0.001 Ω 20 mω. 110 to 330 kω/0.1 Ω 12.8 Ω. 33 to 110 kω/0.1 Ω 4.1 Ω
IAS Accreditation Number Accredited Entity Address CL-178 Qatar Calibration Services WLL, (QCAL) QP West Services Area Ghuwairiya, St IR #1 Ras Laffan Doha, PO Box 16069, State of Qatar Shreenivasa T R,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FUGRO SUHAIMI LIMITED, YANBU P.O. Box 31720 Yanbu Al-Sinaiyah-41912, Kingdom of Saudi Arabia Mohammed Baquer Hameed Phone: 009663 857
QATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES AREA GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX STATE OF QATAR
This is to attest that QATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX 16069 STATE OF QATAR Calibration Laboratory CL-178 has met the requirements
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INNOVATECIS CIA LTD. General Jose Maria Guerrero N69-170 y Alfonso del Hierro Quito, Ecuador 170103 Diego Almeida Phone: 593 260 40607 CALIBRATION Valid To:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 DIGITAL MEASUREMENT METROLOGY INC. (A TRESCAL COMPANY) 26 Automatic Road, Unit 4 Brampton, Ontario, CANADA L6S 5N7 Nana Mantey Phone:
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate
TRACEABLE MEASUREMENT CAPABILITY
PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-TEC, INC. 114 Thruway Park Road Broussard, LA 70518 Chris Grevemberg Phone: 337 839 0450 Email: lab@caltecinc.com CALIBRATION Valid
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALABAMA SCALE & INSTRUMENT, INC. d.b.a. ASI Calibration Labs Alabama 1644 Varner Drive Mobile, AL 36693 Lawson Hill Phone: 251 660 9999
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone: 972 3 9716596 CALIBRATION Valid To: July 31, 2019 Certificate Number: 4282.01
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 8023 Interstate 30 Little Rock, AR 72209 Dustin R. Detten Phone: 214 638 1808 CALIBRATION Valid To: September 30, 2018
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México. C.P. 88787 0 (Hereinafter
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Pte. Ltd. Blk
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Vietnam LTD.
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 0 (Hereinafter called the Organization) and hereby
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: May 31,
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ASSOCIATED CALIBRATION, INC. DBA A-CAL 4583 E Eisenhower Circle Anaheim, CA 92807 Marshall Doyle Phone: 714 696 5300 CALIBRATION Valid To: January 31, 2019
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Calsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date
Last Amended on 23.11.2016 Page 1 of 7 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 10 mv to100 mv 100 mv to1000 V 0.43% to 0.05% 0.05% to 0.01% 0.01% to 0.004% Calibrator, Calibrator by DC VOLTAGE 1mV to 20 mv
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APTIV CONTRACT SERVICES. S. DE R. L. DE C. V. CALIBRATION LAB Mexico Technical Center Ave. Hermanos Escobar #5756 Cd. Juarez, Chihuahua C.P. 32310, Mexico Ricardo
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA Roger Arnold Phone: CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA 92870 Roger Arnold Phone: 657 216 2600 CALIBRATION Valid To: December 31, 2017 Certificate Number: 4296.01
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México C.P. 88787 0 (Hereinafter
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest
STANDARD CALIBRATIONS, INC. 908 VENTURES WAY CHESAPEAKE, VIRGINIA 23320
This is to signify that STANDARD CALIBRATIONS, INC. 908 VENTURES WAY CHESAPEAKE, VIRGINIA 23320 Calibration Laboratory CL-120 has met the requirements of the IAS Accreditation Criteria for Calibration
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Rio Bravo, Tamaulipas, México. C.P. 88940 (Hereinafter
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SERVICE, INC., A TEST EQUIPMENT REPAIR CORPORATION company 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX CANADA 400 Britannia Road E, Unit 2 Mississauga, Ontario L4Z 1X9 Canada Andrew Sweeny Phone: 905 241 3021 CALIBRATION Valid
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FUGRO SUHAIMI LIMITED Calibration Laboratory Riyadh Building No.124, Najah Street Ishbiliyah, District Riyadh, Kingdom of Saudi Arabia 31451 Mohammed B. Hameed
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC South Lakes Drive Charlotte, NC Connie Foster Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August 31, 2019 Certificate Number:
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México C.P. 88787 0 (Hereinafter
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRANE LA CROSSE METROLOGY LAB 2313 20th Street South La Crosse, WI 54601 Rick McKenzie Phone: 608 787 4032 CALIBRATION Valid To: October
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TECHNICAL SERVICES, INC. 8400 Wolf Lake Dr. Suite 106 Memphis, TN 38133 Cathy Mansfield Phone: 770 423 1400 cmansfield@atslab.com
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TECHMASTER ASIA (Thailand) Co., Ltd 5/41
Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra
Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44
CERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation has assessed the Laboratory of: Rays Precision Calibration, Inc 881-3 Nandino Blvd., Lexington, KY 40511 (Hereinafter called the
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Horizonte #28 entre Astro Rey Sur y Nuevo Amanecer
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that ARREGA TECNOLOGIA, SAPI, DE CV/ARREGA INDUSTRIAL
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 QUALITY SYSTEMS LAB, INC. 7604 North West 6 th Ave Boca Raton, FL 33487 Bryan Wilkerson Phone: 561-999-1896 CALIBRATION
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Portland 14058 SW Milton Court Portland,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: December
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA 92870 Roger Arnold Phone: 657 216 2600 CALIBRATION Valid To:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AL HOTY CALIBRATION SERVICES A BRANCH OF AL HOTY CO. LTD. 25 th St. Corner Zulfi St. Thuqbah Al Khobar, Saudi Arabia 31952 Wendell Arevalo Phone: 00966 13 864
President For the Accreditation Council Certificate Number Valid to January 31, 2010
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY HAYES INSTRUMENT SERVICE, INC. Billerica, MA for technical competence in the field of Calibration This laboratory
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 6878 Santa
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 HN PROFICIENCY TESTING INC. 10219 Coral Reef Way Indianapolis, IN 46256 Henrik Nielsen Phone: 317 713 2988 Web: http://www.hn-proficiency.com/ PROFICIENCY TESTING
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Arrega Tecnologia, SAPI, de CV/Arrega Industrial
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METROCAL, INC 3631 44 th Street SE, Suite B Kentwood, MI 49512 Kent Anderson Phone: 616 698 3124 CALIBRATION Valid To: September 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JAPAN QUALITY ASSURANCE ORGANIZATION Kyushu testing office 2-33, Miyanojin 3-Chome, Kurume-shi, Fukuoka, 839-0801 Japan Masaya Ishimaru Phone: 81 942 48 7763
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TesCom 2600 Longhorn Blvd., Ste. 112 Austin,
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wintronics, Inc. 50 Division Ave Millington,
CALIBRATION AND MEASUREMENT CAPABILITY (CMC) 1,2
IAS Accreditation Number Accredited Entity Address CL-140 8501 East Pleasant Valley Road Independence, Ohio 44131 Matt Meyer (216) 524-4990 x88235 Contact Name Telephone Effective Date of Scope October
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metrology Division Contact: Mr K Pallett Calibration House Tel: +44 (0)1332 867 700 Castings Road E-Mail: sales@comech.co.uk Derby Website:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TRESCAL, INC. 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen Phone: 678 341 6090 CALIBRATION Valid To:
Hellenic Accreditation System. Annex F2/15 to the Certificate No SCOPE of ACCREDITATION
Hellenic Accreditation System Annex F2/15 to the Certificate No. 345-3 SCOPE of ACCREDITATION of the Calibration laboratory of ALGOSYSTEMS S.A. Temperature/ Temperature block calibrators Temperature measurements
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:1999 Certificate Number L1048 Digital Measurement Metrology Inc. 26 Automatic Road, Unit 4 Raj Sharma Brampton, Ontario L6S 5N7 Canada Is recognized by the Laboratory
Scope of Accreditation For Alliance Calibration. Calibration
Scope of Accreditation For Alliance 11402 Reading Road Cincinnati, OH 45241 Sidney Taylor 513-769-1200 In recognition of a successful assessment to ISO/IEC 17025:2005 to the following and Measurement Capabilities,
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:, (Hereinafter called the Organization) and hereby
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z540.3
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3 SIMCO ELECTRONICS (Ireland) Limited IDA Business & Technology Park Garrycastle, Dublin Rd Athlone Westmeath, Ireland
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONTROL AUTOMATION TECHNOLOGIES CORP 6540 Emmaus Church Road Suite 106 Providence Forge, VA 23140 Rob Igoe Phone: 336 725 6120 Ext 2
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precisión Calibration de Mexico S.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 WESTERN STATES CALIBRATION 105 West 2950 South Salt Lake City, UT 84115-3433 Lon Miles Phone: 801 466 1700 CALIBRATION Valid To: February
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 0 (Hereinafter called the Organization) and hereby
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 7323 Tom Drive Baton Rouge, LA 70806 Jerry Kraus Phone: 225 925 2029 x3028 CALIBRATION
Scope of Accreditation For Southwest Metrology, Inc. Calibration
Scope of Accreditation For Southwest Metrology, Inc. 7045 N Camino Martin Tucson, AZ 85741 Dan Beard 520-744-8510 In recognition of a successful assessment to ISO/IEC 17025:2005 and ANSI/NCSL Z540-1: 1994
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that OCS Technologies, Inc. (dba: Ohio Counting
CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222
This is to signify that CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222 Calibration Laboratory CL-108 has demonstrated compliance with the ANS/ISO/IEC Standard 17025:2005, General requirements
CL-101, INyMET Page 1 of 19. Dimensional Up to 100 mm/0.02 mm Up to 1000 mm/0.02 mm. Calipers (Vernier and dial) Calipers (Digitalelectronic)
IAS Accreditation Number CL-101 Accredited Entity INyMET Address Salvatierra No. 32-5 Col San Bartolo Atepehuacan D.F. 07730 Mexico Contact Name Eng. Benjamin Hernandez, QAD Manager Telephone +52 (55)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,