jimfusion Satellite image manipulation SOFTWARE FEATURES QUICK GUIDE
|
|
- Susanna Foster
- 6 years ago
- Views:
Transcription
1 jimfusion Satellite image manipulation SOFTWARE FEATURES QUICK GUIDE * jimfusion was made almost specifically for research purposes and it does not intend to replace well established SIG or image manipulation software. Also notice that its support is limited to the crew available in CERENA research center.
2 Developer tools Base tools: Python Numpy Scipy User interface: wxpython 3D visualization: Mayavi Image manipulation: PIL
3 Main menu TOOLBAR OBJECTS VIEWER There are three main areas in this software: toolbar, object management, and object viewer. Everything can be done through these sections*. * The layout of the software may change depending on the version (on the left is the first version).
4 Main menu - toolbar With this button you can import image files (TIFF). It will appear a file dialog from which you can select the file you want to import. With this button you can import columned ASCII files. It will appear a file dialog from which you can select the file you want to import. The user will have to input the number of blocks in each direction and if more than one column exists one file only the last one will be considered. From here you can export data that is inside jimfusion into either image (TIFF) or ASCII columned files. The TIFF uses a type of variable that goes from 0 to 255 so make sure that you normalize your data before you export it. Here you can make all sorts of definitions in the way you want to view or interpret your data. Other specifications (like background color and so on) can only be done in the viewer. This is the about this software information. Who s the developer, license, and so on...
5 Import Data If you select import ASCII you should give the number of blocks in each direction and than select the file you wish. For TIFF the process is even simpler. Just load the TIFF file directly from the file dialog. After data the object will appear in the object management section.
6 Main menu object management In the object management section this is what you ll see. Notice that no object exists yet on the manager. But if so I would appear with its name (when you load a file a name will be given to that object but can be changed easily) like a list in the white square. A single click will get the object selected (up). A double click will also bring the object to the viewer (down). NOTE: Right click will delete (if user says yes) object.
7 Main menu object specifics For organization purposes you can change some details of your object when selecting it. If you change the name, size or first coordinate in the object specifics section (you must press enter to actually change something) you ll notice that it will actually change those specifics on the object. The only essential information is the number of blocks in each direction.
8 Object viewer The object viewer only views one object at a time but its pretty easy to move around. Its mouse and keyboard interactive (make sure you click on the viewer to manipulate it) and you can edit some of its traits by going to the viewer configure the scene button. By default the background is silver white but I ve changed it to white (foreground -> labels to black) and now I have something more of my preference.
9 Object viewer Types and layout The buttons on the viewer are pretty self explaining. You can choose the perspective (X,Y,Z, isometric), insert orientation glyph or toggle full screen. You also have a save icon that plots the current figure to file. There are several types of objects the viewer can plot. Such as image plot (left figure), histogram and variogram (below). Plots such as variogram are dynamic which means there can be changes in real time to adequate a variogram model, for instance. But there s a catch. Since all happens in an equal scale in all axis the value of the variogram or the probability in histogram are not true values but manipulated values to plot something easily visualized on screen. Interiorly jimfusion works with the real values so the user can work with what it s visualizing.
10 User definitions Use variable range: Auto for natural variable range of each object, Full to the 0 to 255 range. Use colormap: colormap to plot variables, default is jet (blue to red, passing on green and yellow). Show as: Image, Surface or Contour. If Surface the variable range will be changed (surface gives spatial weight to the value of the variable representing a 3D object). Division for Zscale: This is the number for each the variable of an object is divided when shown as surface (because 255, for example, will give a pretty high altitude for the surface making it difficult to visualize). Image Surface
11 Types of plot There are three main types of plot objects: Spatial: double click on the object. Histogram: press the histogram button. Variogram: press variogram button. Image Surface Contour Spatial Histogram Variogram
12 Univariate section Histogram equalization The Univariate section gives you access to both histogram (that we ve seen before) and variable transformations (changing the variable to range = 0->255). Available variable transformations are: Equalization: meaning histogram equalization. Good to improve image contrast. Normalization: transforms from variable range to 0->255 range with linear interpolation. Sigmoid: used sigmoid exponential function to transform variable. Sigmoid Normalization
13 Filtering and attributes section The filtering and attributes section gives us algorithms to create new object through filters and attributes (that s unexpected!!!)*. The attributes go from autocorrelation (using one or two images) to correlograms. In the filtering part we have three of choice, each with its own purpose. Uniform filter, Median filter and Gaussian filter. For the Uniform and Median, the number on the right means moving window size. For Gaussian means standard deviation. Uniform Gaussian Median * In the first version of the software there is a lot of research being conducted in the attributes sections and some algorithms may give unexpected results.
14 Slicing and manipulation section This sections allows us to crop our objects spatially (for instance in a grid of 100 by 100 blocks, creating a new object from the first 50 blocks in each direction), better said slicing. Also allows us to resize (using nearest criteria in the first version of the software) our object by giving the new number of blocks in each direction. Resize Slice
15 Variography section The variogram button calculates the experimental variogram of the object (if big may take a while, see the progress bar). After finishing the variogram object will appear in the viewer. You can choose which model to use, the sill (screen values), the range in each direction. For you to see the blue line of the model you need to check the checkbox at the right of the model choice. Once you ve done it the blue lines should appear and be automatically refreshed every time the sliders and sill values are changed. Notice that even the variogram is 3D so you ll be having points over the X axis for variogram in the X direction and over the Y axis for the Y direction.
16 Downscaling data With resize algorithm you can actually downscale your grid but this method is far from flawless since the user doesn t have any control on the downscaling process (it uses nearest criteria*). * Further versions may have other choices for resize using the PIL library, such as BILINEAR, BICUBIC or ANTIALIAS.
17 template
Image Editor. Opening Image Editor. Click here to expand Table of Contents...
Image Editor Click here to expand Table of Contents... Opening Image Editor Image Editor Sorting and Filtering Using the Image Editor Source Tab Image Type Color Space Alpha Channel Interlace Mipmapping
More informationGetting Started. with Easy Blue Print
Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the
More informationLAB 2: Sampling & aliasing; quantization & false contouring
CEE 615: Digital Image Processing Spring 2016 1 LAB 2: Sampling & aliasing; quantization & false contouring A. SAMPLING: Observe the effects of the sampling interval near the resolution limit. The goal
More informationChief Architect X3 Training Series. Layers and Layer Sets
Chief Architect X3 Training Series Layers and Layer Sets Save time while creating more detailed plans Why do you need Layers? Setting up Layer Lets Adding items to layers Layers and Layout Pages Layer
More informationIntroduction. Let s get started...
Introduction Welcome to PanoramaPlus 2, Serif s fully-automatic 2D image stitcher. If you re looking for panorama-creating software that s quick and easy to use, but doesn t compromise on image quality,
More informationADDING RAIN TO A PHOTO
ADDING RAIN TO A PHOTO Most of us would prefer to avoid being caught in the rain if possible, especially if we have our cameras with us. But what if you re one of a large number of people who enjoy taking
More informationChapter 6: TVA MR and Cardiac Function
Chapter 6 Cardiac MR Introduction Chapter 6: TVA MR and Cardiac Function The Time-Volume Analysis (TVA) optional module calculates time-dependent behavior of volumes in multi-phase studies from MR. An
More informationPhotoshop CS part 2. Workshop Objective. Getting Started Quit all open applications Single click Adobe Photoshop from the Dock
pg. 1 Photoshop CS part 2 Photoshop is the premier digital photo editor application used for photo retouching, creating web images, film/video compositing, and other pixel/vector-based imagery. Workshop
More informationVTube-LASER Quick Start Guide
VTube-LASER Quick Start Guide This guide shows how to import a STEP file and then MEASURE and qualify demo tube 4 using the standard UNISCAN method of measuring. The steps in this workflow are from version
More informationHow to prepare your files for competition using
How to prepare your files for competition using Many thanks to Margaret Carter Baumgartner for the use of her portrait painting in this demonstration. 2015 Christine Ivers Before you do anything! MAKE
More informationAMEEL Digitization Manual: Part 5, Phase Two Processing in Photoshop 1
AMEEL Digitization Manual: Part 5, Phase Two Processing in Photoshop 1 Phase Two Processing: Photoshop The Phase One processing in BCS-2 produces a series of page images tightly cropped to include only
More informationWe recommend downloading the latest core installer for our software from our website. This can be found at:
Dusk Getting Started Installing the Software We recommend downloading the latest core installer for our software from our website. This can be found at: https://www.atik-cameras.com/downloads/ Locate and
More informationHouse Design Tutorial
Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created
More informationHouse Design Tutorial
House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a
More informationTeleTrader FlashChart
TeleTrader FlashChart Symbols and Chart Settings With TeleTrader FlashChart you can display several symbols (for example indices, securities or currency pairs) in an interactive chart. You can also add
More informationLearning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:
Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013
More informationHouse Design Tutorial
House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a
More informationLab 6 Profiles of DEMs and change detection by using the DEMs
Lab 6 Profiles of DEMs and change detection by using the DEMs Introduction This lab will introduce you to change detection by subtraction between two images. You will subtract two Digital Elevation Model
More informationMETAL TEXT EFFECT. Step 1: Create A New Document. Step 2: Fill The Background With Black
METAL TEXT EFFECT In this text effects tutorial, we ll learn how to easily create metal text, a popular effect widely used in video games and movie posters! It may seem like there s a lot of steps involved,
More informationImaging Features Available in HTML5. it just makes sense
Imaging Features Available in HTML5 it just makes sense August, 2018 Imaging Features Available in HTML5 As part of the 5.2 SP1 release, the Images functionality is now available in HTML5 and provides
More informationImage Pro Ultra. Tel:
Image Pro Ultra www.ysctech.com info@ysctech.com Tel: 510.226.0889 Instructions for installing YSC VIC-USB and IPU For software and manual download, please go to below links. http://ysctech.com/support/ysc_imageproultra_20111010.zip
More information1/31/2010 Google's Picture Perfect Picasa
The Picasa software lets you organize, edit, and upload your photos in quick, easy steps. Download Picasa at http://picasa.google.com You'll be prompted to accept the terms of agreement. Click I Agree.
More informationHouse Design Tutorial
Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have
More informationDigital Photography 1
Digital Photography 1 Photoshop Lesson 3 Resizing and transforming images Name Date Create a new image 1. Choose File > New. 2. In the New dialog box, type a name for the image. 3. Choose document size
More informationGetting Started with Qucs
Getting Started with Qucs Graham Edge University of Toronto After downloading Qucs, installing it, and running for the first time you should see a window that looks something like this: The large yellow
More informationFlashChart. Symbols and Chart Settings. Main menu navigation. Data compression and time period of the chart. Chart types.
FlashChart Symbols and Chart Settings With FlashChart you can display several symbols (for example indices, securities or currency pairs) in an interactive chart. You can also add indicators and draw on
More informationGEO/EVS 425/525 Unit 9 Aerial Photograph and Satellite Image Rectification
GEO/EVS 425/525 Unit 9 Aerial Photograph and Satellite Image Rectification You have seen satellite imagery earlier in this course, and you have been looking at aerial photography for several years. You
More informationTinker Tuesday Project - Fabric Engraving
Tinker Tuesday Project - Fabric Engraving 1. Open CorelDRAW and create a new document. On the toolbar on the left side of the screen, select the Basic Shapes tool icon. This will allow you to create simple
More informationIMPAX 6 DISPLAY TOOL LIST
IMPAX 6 DISPLAY TOOL LIST IMPAX 6.0 TOOLS INDEX A Advance by Image Allows you to scroll from one image or frame to the next Advance by Page Pages through images in a large series, one screen at a time
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More information1. What is SENSE Batch
1. What is SENSE Batch 1.1. Introduction SENSE Batch is processing software for thermal images and sequences. It is a modern software which automates repetitive tasks with thermal images. The most important
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More informationHouse Design Tutorial
Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have
More informationStep 1: Open A Photo To Place Inside Your Text
Place A Photo Or Image In Text In Photoshop In this Photoshop tutorial, we re going to learn how to place a photo or image inside text, a very popular thing to do in Photoshop, and also a very easy thing
More informationLightroom Classic CC and Lightroom CC Updates
Lightroom Classic CC and Lightroom CC Updates Information about the latest December 2017 Lightroom system updates This December Adobe have released updates for the entire Lightroom CC ecosystem, including
More informationBasics Pictures Media Bar
Basics 1 The right pictures can make your publication stand out from the crowd. In this tutorial, we ll show you how to: Add and replace pictures. Use the Media Bar. Pan, zoom, and crop pictures. Apply
More informationCADPIPE Industrial Pipe. Tutorial
CADPIPE Industrial Pipe Tutorial Introduction This Tutorial is a brief introduction to the power of CADPIPE 3D DESIGN. We will show you a few key features and the general procedures for creating 3D piping
More informationFLIR Tools for PC 7/21/2016
FLIR Tools for PC 7/21/2016 1 2 Tools+ is an upgrade that adds the ability to create Microsoft Word templates and reports, create radiometric panorama images, and record sequences from compatible USB and
More informationMy Star Cards - StarCash
My Star Cards - StarCash Table of Contents StarCash... 1 Star Cash... 1 StarCash Menu... 1 Related topics... 2 Order StarCash cards... 2 Order StarCash Cards... 2 StarCash Order List Screen... 2 StarCash
More informationTribometrics. Version 2.11
Tribometrics Version 2.11 Table of Contents Tribometrics... 1 Version 2.11... 1 1. About This Document... 4 1.1. Conventions... 4 2. Introduction... 5 2.1. Software Features... 5 2.2. Tribometrics Overview...
More informationThe Magazine for Photographers November 2016
The Magazine for Photographers The Magazine for Photographers CONTENTS NOVEMBER 4 Panning and Zooming in Lightroom 16 Photoshop Tool Presets 23 Step by Step: Pencil Shading Effect 32 Batch Renaming 46
More informationPhoto Editing in Mac and ipad and iphone
Page 1 Photo Editing in Mac and ipad and iphone Switching to Edit mode in Photos for Mac To edit a photo you ll first need to double-click its thumbnail to open it for viewing, and then click the Edit
More informationSBIG ASTRONOMICAL INSTRUMENTS
SBIG ASTRONOMICAL INSTRUMENTS SANTA BARBARA INSTRUMENT GROUP 147-A Castilian Drive Santa Barbara, CA 93117 Phone (805) 571-SBIG (571-7244) FAX (805) 571-1147 e-mail:sbig@sbig.com home page:www.sbig.com
More informationUsing Focus/Hide on a Pivot
Using Focus/Hide on a Pivot Sometimes you want to focus on specific data in a pivot to see and analyze a specific part of the data that was brought back when you processed the report. You can accomplish
More informationTutorial 1: Install Forecaster HD (Win XP, Vista, 7, 8)
Tutorial 1: Install Forecaster HD (Win XP, Vista, 7, 8) Download Forecaster HD (FHD) from Community s website http://www.communitypro.com/productlist/135-forecaster-ceiling-system-software Open Setup.exe
More informationADOBE PHOTOSHOP CS 3 QUICK REFERENCE
ADOBE PHOTOSHOP CS 3 QUICK REFERENCE INTRODUCTION Adobe PhotoShop CS 3 is a powerful software environment for editing, manipulating and creating images and other graphics. This reference guide provides
More informationTerm Definition Introduced in: Tab(s) along the ribbon that show additional programs or features (e.g. Acrobat )
60 Minutes of Excel Secrets Key Terms Term Definition Introduced in: Tab(s) along the ribbon that show additional programs or features (e.g. Acrobat ) Add-Ins AutoCorrect Module 1 Corrects typographical,
More informationGEO/EVS 425/525 Unit 2 Composing a Map in Final Form
GEO/EVS 425/525 Unit 2 Composing a Map in Final Form The Map Composer is the main mechanism by which the final drafts of images are sent to the printer. Its use requires that images be readable within
More informationCutting out in GIMP. Navigation click to go to a section
Cutting out in GIMP Navigation click to go to a section Before you start Cutting out an element Using several elements Using backgrounds with cut out elements Adjusting the colour of elements Creating
More informationGeometric Functions. The color channel toolbar buttons are disabled.
Introduction to Geometric Transformations Geometric Functions The geometric transformation commands are used to shift, rotate, scale, and align images. For quick rotation by 90 or mirroring of an image,
More informationAppendix to Chapter 1 Release 3
Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,
More informationPhotoshop CC 2018 Essential Skills
Photoshop CC 2018 Essential Skills Adobe Photoshop Creative Cloud 2018 University Information Technology Services Learning Technology, Training, Audiovisual and Outreach Copyright 2018 KSU Division of
More informationPHOTOSHOP. Introduction to Adobe Photoshop
PHOTOSHOP You will; 1. Learn about some of Photoshop s Tools. 2. Learn how Layers work. 3. Learn how the Auto Adjustments in Photoshop work. 4. Learn how to adjust Colours. 5. Learn how to measure Colours.
More informationPosterArtist Quick Guide
PosterArtist Quick Guide Create posters in four easy steps STEP STEP STEP STEP Use Auto Design to Create Posters Simply select a poster type and a design image to automatically create high-quality posters.
More informationCONTENT INTRODUCTION BASIC CONCEPTS Creating an element of a black-and white line drawing DRAWING STROKES...
USER MANUAL CONTENT INTRODUCTION... 3 1 BASIC CONCEPTS... 3 2 QUICK START... 7 2.1 Creating an element of a black-and white line drawing... 7 3 DRAWING STROKES... 15 3.1 Creating a group of strokes...
More informationThis week we will work with your Landsat images and classify them using supervised classification.
GEPL 4500/5500 Lab 4: Supervised Classification: Part I: Selecting Training Sets Due: 4/6/04 This week we will work with your Landsat images and classify them using supervised classification. There are
More informationGIMP (GNU Image Manipulation Program) MANUAL
Selection Tools Icon Tool Name Function Select Rectangle Select Ellipse Select Hand-drawn area (lasso tool) Select Contiguous Region (magic wand) Selects a rectangular area, drawn from upper left (or lower
More information4.5.1 Mirroring Gain/Offset Registers GPIO CMV Snapshot Control... 14
Thank you for choosing the MityCAM-C8000 from Critical Link. The MityCAM-C8000 MityViewer Quick Start Guide will guide you through the software installation process and the steps to acquire your first
More informationdigitization station DIGITAL SCRAPBOOKING 120 West 14th Street
digitization station DIGITAL SCRAPBOOKING 120 West 14th Street www.nvcl.ca techconnect@cnv.org DIGITAL SCRAPBOOKING With MyMemories Suite 6 The MyMemories Digital Scrapbooking software allows you to create
More informationOVERVIEW: learning the basics of digital image manipulation using GIMP
OVERVIEW: learning the basics of digital image manipulation using GIMP This learning resource contains information about a small part of GIMP. Extensive documentation can be found online: http://docs.gimp.org/2.6/en/.
More informationQuick Guide for ArcReader GIS Installation & Use
Town of Hanover Planning Department Quick Guide for ArcReader GIS Installation & Use For more information, contact the Town Planner, Andrew Port (781-826-7641) or port.planning@hanover-ma.gov System Requirements
More information12. Creating a Product Mockup in Perspective
12. Creating a Product Mockup in Perspective Lesson overview In this lesson, you ll learn how to do the following: Understand perspective drawing. Use grid presets. Adjust the perspective grid. Draw and
More informationIntroduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
More informationMRI Grid. The MRI Grid is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board.
Abstract The is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board. Illustration 2: A grid on a binary image. Illustration 1: The interface
More informationOrnamental Pro 2004 Instruction Manual (Drawing Basics)
Ornamental Pro 2004 Instruction Manual (Drawing Basics) http://www.ornametalpro.com/support/techsupport.htm Introduction Ornamental Pro has hundreds of functions that you can use to create your drawings.
More informationPhotoshop CS6 automatically places a crop box and handles around the image. Click and drag the handles to resize the crop box.
CROPPING IMAGES In Photoshop CS6 One of the great new features in Photoshop CS6 is the improved and enhanced Crop Tool. If you ve been using earlier versions of Photoshop to crop your photos, you ll find
More informationGenerations Automatic Stand-Alone Lace By Bernie Griffith Generations Software
We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A
More informationThe Main Screen. Viewing Area - show the photos that were selected in the Source List.
iphoto 11 The Main Screen Source List - This is where the Library, Events and Albums are identified. It is the place where photos can be organized and accessed. The Source List can also contain the slideshows,
More informationApple Photos Quick Start Guide
Apple Photos Quick Start Guide Photos is Apple s replacement for iphoto. It is a photograph organizational tool that allows users to view and make basic changes to photos, create slideshows, albums, photo
More informationThe Difference Between Image Resizing and Resampling in Photoshop
The Difference Between Image Resizing and Resampling in Photoshop When changing the size of an image in Photoshop, there s really two ways to go about it. You can either resize the image, or you can resample
More informationImage Enhancement (from Chapter 13) (V6)
Image Enhancement (from Chapter 13) (V6) Astronomical images often span a wide range of brightness, while important features contained in them span a very narrow range of brightness. Alternatively, interesting
More informationMid_Term_Review_PhotoShop_Design Test B Name
Mid_Term_Review_PhotoShop_Design Test B Name Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Photoshop uses a mathematical process called when it changes
More informationObjectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects.
v. 10.1 GMS 10.1 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS
More informationMIPAR. and so many more. We ve taken another step forward and can now detect the most challenging of bars! Show Feature as Line
MIPAR Release Notes v1.4.0 Even Better Scale Bar Detection and so many more We ve taken another step forward and can now detect the most challenging of bars! Color-Coded Histograms Histograms Match Images
More informationAdobe Photoshop CS2 Workshop
COMMUNITY TECHNICAL SUPPORT Adobe Photoshop CS2 Workshop Photoshop CS2 Help For more technical assistance, open Photoshop CS2 and press the F1 key, or go to Help > Photoshop Help. Selection Tools - The
More informationImagesPlus Basic Interface Operation
ImagesPlus Basic Interface Operation The basic interface operation menu options are located on the File, View, Open Images, Open Operators, and Help main menus. File Menu New The New command creates a
More informationApplications of satellite and airborne image data to coastal management. Part 2
Applications of satellite and airborne image data to coastal management Part 2 You have used the cursor to investigate the pixels making up the image EIRE4.BMP and seen how the brightnesses of sea, land
More informationPhotoshop CS2. Step by Step Instructions Using Layers. Adobe. About Layers:
About Layers: Layers allow you to work on one element of an image without disturbing the others. Think of layers as sheets of acetate stacked one on top of the other. You can see through transparent areas
More informationI Read Banned Books Poster File Tip Sheet. The Basics
I Read Banned Books Poster File Tip Sheet The Basics Open the poster file using photo editing software that can support PSD files, such as Adobe Photoshop, Photoshop Elements, or GIMP, a free photo editor
More informationOverDrive for Kindle, Kindle Paperwhite, Kindle Voyage, and Kindle Oasis (not Kindle Fire and Fire Tablet) Contents
OverDrive for Kindle, Kindle Paperwhite, Kindle Voyage, and Kindle Oasis (not Kindle Fire and Fire Tablet) Contents Optimizing OverDrive for your Kindle Searching and Browsing Borrowing and Downloading
More informationCS 200 Assignment 3 Pixel Graphics Due Monday May 21st 2018, 11:59 pm. Readings and Resources
CS 200 Assignment 3 Pixel Graphics Due Monday May 21st 2018, 11:59 pm Readings and Resources Texts: Suggested excerpts from Learning Web Design Files The required files are on Learn in the Week 3 > Assignment
More informationACAD-BAU TUTORIAL For BricsCAD platform
ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.
More informationLevels. Chapter Nine PLAY VIDEO INTRODUCTION LEVEL MANAGER AND LEVEL DISPLAY DIALOGS LEVEL MANAGER DIALOG
Chapter Nine Levels PLAY VIDEO INTRODUCTION A design file consists of any number of levels. A level is a way of separating CAD data much the same way as a clear sheet of acetate is used by an architect
More informationImprove your photos and rescue old pictures
PSPRO REVISTED Nov 5 2007 Page 1 of 7 Improve your photos and rescue old pictures This guide gives tips on how you can use Paint Shop5 and similar free graphic programmes to improve your photos. It doesn
More informationMullingar Camera Club Basic introduction to Digital Printing using Photoshop CC.
Mullingar Camera Club Basic introduction to Digital Printing using Photoshop CC. Table of Contents Course aims: 1 Course presentation notes: 1 Introducing Photoshop: 1 Adjusting the Brightness or Contrast
More informationRoof Tutorial Wall Specification
Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.
More informationLesson 16 Text, Layer Effects, & Filters
Lesson 16 Text, Layer Effects, & Filters Digital Media I Susan M. Raymond West High School In this tutorial, you will: Create a Type Layer Add and Format Type within a Type Layer Apply Layer Effects Apply
More informationDigital Projection Entry Instructions
The image must be a jpg file. Raw, Photoshop PSD, Tiff, bmp and all other file types cannot be used. There are file size limitations for competition. 1) The Height dimension can be no more than 1080 pixels.
More information3D Viewer. user's manual _6
EN 3D Viewer user's manual 10017352_6 TABLE OF CONTENTS 1 INTRODUCTION...1 1.1 System recommendations... 1 1.2 User requirements... 1 2 START-UP OF PLANMECA ROMEXIS VIEWER...2 2.1 Starting Planmeca Romexis
More informationADMS 5 MapInfo Link. User Guide CERC
ADMS 5 MapInfo Link User Guide CERC ADMS 5 MapInfo Link User Guide November 2012 Cambridge Environmental Research Consultants Ltd 3 King s Parade Cambridge CB2 1SJ Telephone: +44 (0)1223 357773 Fax: +44
More informationCopyright Notice. Trademarks
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
More informationITNP80: Multimedia Adobe Photoshop Practical Weeks commencing 26 January and 2 February 2015.
ITNP80: Multimedia Adobe Photoshop Practical Weeks commencing 26 January and 2 February 2015. The aims and objectives of this practical are four-fold: To give you some practical experience of some of the
More informationQuick and Easy Photo Editing with Pixlr
Quick and Easy Photo Editing with Pixlr Why bother? If you upload pictures to the SharpSchool web site as they come from your camera the file size is over fifty times the size that is needed for your web
More informationColor and More. Color basics
Color and More In this lesson, you'll evaluate an image in terms of its overall tonal range (lightness, darkness, and contrast), its overall balance of color, and its overall appearance for areas that
More informationTo-Do List: Initial steps upon opening an.ai document that has been exported from ArcMap
To-Do List: Initial steps upon opening an.ai document that has been exported from ArcMap 1. Update labels. 2. Release all clipping masks and delete the mask. 3. Ungroup all items. 4. Update font sizes.
More informationStoryist is a creative writing application for Mac OS X 10.9 Mavericks or later. Designed specifically for novelists and screenwriters, it provides:
Welcome to Storyist Product Overview Storyist is a creative writing application for Mac OS X 10.9 Mavericks or later. Designed specifically for novelists and screenwriters, it provides: A word processor
More informationOkay, that s enough talking. Let s get things started. Here s the photo I m going to be using in this tutorial: The original photo.
add visual interest with the rule of thirds In this Photoshop tutorial, we re going to look at how to add more visual interest to our photos by cropping them using a simple, tried and true design trick
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationSAVING, LOADING AND REUSING LAYER STYLES
SAVING, LOADING AND REUSING LAYER STYLES In this Photoshop tutorial, we re going to learn how to save, load and reuse layer styles! Layer styles are a great way to create fun and interesting photo effects
More information33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof
33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof A RoofLogic Digitizer license upgrades RoofCAD so that you have the ability to digitize paper plans, electronic plans and
More information