ʹÓÃ˵à Êé USER MANUAL LED MOVING HEAD LIGHT

Transcription

1 LED MOVING HEAD LIGHT WASH *** Due to our product updating, we will not do a future notice if the user manual has any changes. Sorry for any inconvenient caused! *** ʹÓÃ˵à Êé ʹÓÃ˵à Êé USER MANUAL

2 Maintain and clean Note: After using the fixture for a long time, it will have dirty phenomenon. It will affect to use the fixture and the brightness of the light, so we suggest you to maintain and clean the lights regularly.. Advantage of maintain the light: ) Good maintain will make sure the brightness of the light; ) Good maintain will make the lights using for a longer time; ) Good measure to make sure the function of the light stable; 4) Good maintain will make you free from worry, save money and save effort.. The way on how to maintain the fixture: ) Note: Electronic component in the light such as: circuit main board, powersupply, led cannot wash clean or use the tool with fluid substance to clean; ) Please clean the fixture on a fixed time which can be depends on your environment and the frequency you use the light, usually at least 4-6 months you need to clean one time; ) Please disconnect the power before you clean the fixture; 4) Please clean the fixture just when the fixture in a stable mode; 5) Please take off the cover to clean the lens and fan; 6) It is better to use soft cloth, small brush, and blower gun to clean the fixture; 7) LED moving head is a modern energy conservation and environmental protection product; please make sure the voltage you use is stable on the rated voltage; 8) LED moving head is frontier hi-tech energy conservation and environmental; protection lighting product, please make sure the voltage you used is around the rated voltage. Statement.This fixture is tested by our factory and the quality will be good and also good packed before shipping. Any damages caused by the disregard of this user manual are not subject to warranty. The dealer with not accept liability for any resulting defects or problems.. Due to our product updating, we will not do a future notice if the user manual has any changes. 9

3 CH 55 Green color CH4 55 Blue color Be careful with your operations, with a dangerous voltage you can suffer a dangerous electric shock when touching wires. Spectrum CRT 4-55 no action 9-4 sound active mode 76-9 no action 6-75 auto mode -5 no action 96- reset(prepare time seconds) 8-95 no action 6-8 horizontal/vertical closed light running -5 no action 9-55 Y axis reverse direction 8-9 X/Y axis reverse directi on at the same time 64-7 X axis forward direction -6 X/Y axis forward directi on at the same time Damages caused by the disregard of this user manual are not subject to warranty. The dealer with not accept liability for any resulting defects or problems. Checking fixture and components Thank you for choosing our led moving head light. If follow the introductions given in this manual, we are sure you will enjoy the device for a long period of time.unpack your led moving head light, check carefully the content of the box and contact immediately your forwarder in case of damage. The following items are included in the box: m/ -pin DMX cable: pc User manual: pc Led moving head light: pc Rotation angle -54 /-6-8 Red LUX Distance(m) Green LUX Distance(m) Blue LUX Distance(m) White LUX Distance(m) 5 5 Pan:-54 or -6 Technical specifications Tilt:-8 Voltage V-4V AC 5/6HZ. Power consumption 5W 6W 6W Light source R4+G8+B8+W8*W R4+G8+B8+W8*W R/G/B LED in *7*W 4 Light Included angle: DMX channel 4CH 6 X axis 54deg and 6deg for option, it has auto closed-loop system

4 7 Y axis 8deg, it has auto closed-loop system 8 Horizontal, Vertical independent linear speed adjustable 9 Fine tunning: X/Y axis 6bit accurate positioning can set X/Y forward and reverse on the controller Dimmer: -% linear dimmer Strobe: -times/s (it has common strobe, thunder strobe, Radom strobe, sudden dark and lightstrobe, sudden light and dark strobe) linear adjustable RGB56*56*56color mixing Control mode:dmx5 signal,master/slave,work Auto And Sound active 4 light closing&position fixing function 4 can edit X/Y forward and reverse direction for single light or group light on the controller 6 Size of fixture 6mm*mm*4mm 7 Size of package 4mm*mm*45mm 8 N. W 9KG 9 G.W KG 4 Installation and operation CH9 55 Green color Green color from dark to light, linear adjustable CH 55 Blue color Blue color from dark to light, linear adjustable The person who install and operate this fixture should have relevant technical qualifications.pls read and follow this manual carefully before you install and operate the fixture. Damages and loss caused by the disregard of this user manual are not subject to warranty. The dealer with not accept liability for any resulting defects or problems.. This fixture is indoor energy-saving and environment-protecting product. Please keep from moisture and dust.. please do not take apart the cover or change equipment personally.. When open the box, please take out the foam which used for shipping.4. This fixture is with good quality and good packed before we ship out. Please do not take apart the cover or change equipment personally. 4. Please install the fixture in proper place to make sure use it safely and not shake the fixture to make sure get good effect. Please pay attention to shock it. Please avoid violent collision when installing. 5. Please do not connect the power cable to other cable, especially highvoltage fence. 6. The power, voltage that you used should be consistent with the label showed on light. Please make sure effective voltage is not higher or lower than the light required. 7. Please make sure the power cable is connecting well. 8. Please check the fixture and accessories in a regular time. 9. Please disconnect the light if you do not use it or when you clean it.. The protection level of this fixture is level. Please connect yellow/green color cable to the ground.. Please make sure the power you use suit for the fixture before using, and the light is not external power, please do not connect the fixture into external dimmer device. CH White color 55 White color from dark to light, linear adjustable 7 CH 55 R/G/B/W macro function 5-55 R/G/B/W % output at the same time 9-5 Blue color all light+red color from dark to light, green color from light to dark 7-8 Red color all light+green color+blue color from dark to light 5-6 Blue color all light, red color from light to dark -4 Blue color all light, red color from dark to light 9- Green color all light, blue color from light to dark 79-9 Green color all light, blue color from dark to light Red color all light, blue color from dark to light White color all light, blue color from dark to light 5-54 White color all light, green color from dark to light -49 White color all light, red color from dark to light nine colors cycle grudual chaning, 5-94 nine colors cycle jumping, -4 inaction

5 CH5: X/Y speed 55 CH7:R/G/B/W general dimmer 55 X/Y scanning speed adjustable, R/G/B/W dimmer from dark to light, linear adjustable CH6: RGB strobe 55 CH8: RED color gradual dark strobe, 9-95 no action -9 gradual light strobe, 9- no action 7-8 impluse thunder strobe, no action 7-65 common strobe from slow to fast -6 no action Red color from dark to light, linear adjustable. Please do not shot the eyes directly in a close range. Please do not let the unqualified people near to the fixture when the light is working (Such as child, epilepsy patients).please install the light more than meters from inflammable place 4. Please put the light in the room with good ventilation 5. The max temperature for this fixture is 5-4 centigrade 5 Fixture connection Parameterof DMX Signal In/Out A.DMX5 control connecing sketch map B.Work Auto or Master/Slave control connecting stetch manp 6 Hook installation Setup address: 5 9 Light QTY *4+ оºÍ5о ØÖÆÏß²åÍ ¹«Ä µä ª»» Connection of Signal cables(chips and 5Chips) Master Slave Slave Slave 4 lug hook and chassis hook safey rope 4 Fast lock installed in the hole 5 finish hook installing 6

6 7 DMX channel description Channel Function Channel Function CH X axis scanning(-54/6) CH8 Red color 9 DMX channel content CH:PAN scanning CH:TILT scanning CH Y axis scanning(-8) CH9 Green color CH X axis fine scanning 6 bit CH Blue color CG4 Y axis fine scanning 6 bit CH White color CG5 X/Y axis scanning speed CH RGBW color setting CH6 Ch7 RGBW strobe RGBW dimmer CH Ch4 Closed light running+reset+auto mode X/Y axis forward and reverse PAN scanning 54deg/6deg TILT scanning 8deg 8 Display operation LCD display operation DMX addr -up/down address setting Vdlue -5 Pan invert -up/down PAN Setup YES Or NO Pan angle -up/down pan setting 54 Or 6 CH:PAN fine tunning CH4: TILT fine tunning Tilt invert -up/down PAN Setup YES Or NO Mode -up/down mode setting DMX5 DMX mode Servitor Slave mode Manua -up/down channel setting Autometism CH XX Auto mode up/down to choose channel PAN fine tunning 6bit TILT fine tunning 6bit Data:xxx Confirmation Restore -up/down Device reset Motor Factory All motors reset revert to default settings 4 5