Rubix RGB 3D Panel. User Manual. Order code: LEDJ476

Size: px

Start display at page:

Download "Rubix RGB 3D Panel. User Manual. Order code: LEDJ476"

Tracy Stanley
5 years ago
Views:

1 Rubix RGB 3D Panel User Manual Order code: LEDJ476

2 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make sure that there is no damage caused during transportation. Should there be any damage, consult your dealer and do not use the equipment. To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual. Please note that damages caused by user modifications to this equipment are not subject to warranty. CAUTION! KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS CAUTION! TAKE CARE USING THIS EQUIPMENT! HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!! IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution! Never remove warning or informative labels from the unit. Do not open the equipment and do not modify the unit. Do not connect this equipment to a dimmer pack. Do not switch the equipment on and off in short intervals, as this will reduce the system s life. Only use the equipment indoors. Do not expose to flammable sources, liquids or gases. Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable. Make sure that the available mains supply voltage is between 100~240V AC, 50/60Hz. Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically. If the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again. WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not connect power or switch it on immediately. The arising condensation might damage the equipment. Leave the equipment switched off until it has reached room temperature. If your product fails to function correctly, stop use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Pro Light dealer for service. Only use fuses of same type and rating. Repairs, servicing and power connection must only be carried out by a qualified technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS. This lighting fixture is for professional use only - it is not designed for or suitable for household use. The product must be installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls. Warning! Risk Group 2 LED product according to EN Do not view the light output with optical instruments or any device that may concentrate the beam. Rubix RGB 3D Panel User Manual 2

Product overview & technical specifications Rubix RGB 3D Panel Utilising RGB SMD 5050 LEDs combined with retro styling the Rubix offers a fresh approach to on-stage eye candy effects.

3 Product overview & technical specifications Rubix RGB 3D Panel Utilising RGB SMD 5050 LEDs combined with retro styling the Rubix offers a fresh approach to on-stage eye candy effects. Twenty seven pixels, arranged in a hexagonal chassis generate a full colour, 3D effect as the colours bring the flat panel to life. The choice of control options include sound active, master/slave, and auto, accessing a large number of built in macros making these ideal for night clubs, entertainers or on stage. The Rubix also features full pixel mapping capability for integration into larger systems. 108 tri-colour SMD 5050 LEDs (RGB) Viewing angle: 180 Pixels: 27 DMX channels: 9/14/17/81/83 or 98 selectable Auto, sound active and master/slave modes 0-100% dimming and variable strobe Supplied with quick release omega clamps 4 push button menu with LED display PowerCON input/output 3-Pin XLR input/output Convection cooled Specifications Power consumption Power supply Fuse Dimensions Weight Order code Rubix RGB 3D Panel 35W 100~240V, 50/60Hz T1A 250V 500 x 434 x 116mm 5.2kg LEDJ mm 116mm 500mm Rubix RGB 3D Panel User Manual 3

4 Technical specifications MENU ENTER UP DOWN MENU ENTER UP DOWN Rubix RGB 3D Panel Rubix RGB 3D Panel 09 POWER CONSUMPTION: 35W (max.) POWER CONSUMPTION: 35W (max.) POWER INPUT: V~50/60Hz POWER OUTPUT: V~50/60Hz FUSE: T1A 250V DMX INPUT DMX OUTPUT POWER INPUT: V~50/60Hz POWER OUTPUT: V~50/60Hz FUSE: T1A 250V DMX INPUT DMX OUTPUT LED display 02 - Function buttons 03-3-Pin DMX input 04-3-Pin DMX output 05 - PowerCON input 06 - PowerCON output 07 - Fuse T1A 250V 08 - Safety eye 09 - Omega clamp mounts In the box: 1 x fixture, 1 x omega clamp, 2 x triangular connection omega clamp, 1 x connection omega clamp, 1 x PowerCON cable & 1 x user manual Rubix RGB 3D Panel User Manual 4

5 A U T O Auto mode P r o P r. 0 1 P r. 0 2 C o. 0 1 C o. 5 0 S p. 0 1 F L. 0 0 F L. 9 9 Built-in programs P r. 2 8 S p. F L 9. c h 1 4. c h d d d c h 8 1. c h DMX address/channel settings MENU S L A v Slave mode r r 1. F L 8 3. c h 9 8. c h g g 1. F L b b 1. F L r r 2. F L C o L r g g 2. F L Colour mix mode b b 2. F L r r 3. F L g g 3. F L b b 3. F L Rubix RGB 3D Panel User Manual 5

6 S o u d S U. 0 0 S U. 3 1 Sound sensitivity MENU S e t C u r F A I L S y n c C u - 1 C u O f f H o L d n - O f f Dimming curve selection DMX signal failure DMX sync setting - r S t - - N O - y E s Reset factory settings I n F o u e r u Software version Rubix RGB 3D Panel User Manual 6

7 DMX mode: Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independently. To access the DMX address mode, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show d001 on the LED display. Now press the ENTER button and use the UP and DOWN buttons to set the required DMX address. Press the ENTER button to confirm the setting. The DMX channel mode will now be displayed, use the UP and DOWN buttons on the rear of the unit to show select one of the 9/14/17/81/83 or 98 DMX channel modes. Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. 9 channel mode: Channel Value Function 1 segment 1 dimmer 2 segment 1 dimmer 3 segment 1 dimmer 4 segment 2 dimmer 5 segment 2 dimmer 6 segment 2 dimmer 7 segment 3 dimmer 8 segment 3 dimmer 9 segment 3 dimmer 14 channel mode: Channel Value Function 1 Master dimmer 2 dimmer 3 dimmer 4 dimmer 5 segment 1 dimmer 6 segment 1 dimmer 7 segment 1 dimmer 8 segment 2 dimmer 9 segment 2 dimmer 10 segment 2 dimmer 11 segment 3 dimmer 12 segment 3 dimmer 13 segment 3 dimmer No function Strobe (slow-fast) 17 channel mode: Channel Value Function 1 Master dimmer 2 dimmer 3 dimmer 4 dimmer 5 segment 1 dimmer 6 segment 1 dimmer 7 segment 1 dimmer 8 segment 2 dimmer 9 segment 2 dimmer 10 segment 2 dimmer 11 segment 3 dimmer 12 segment 3 dimmer 13 segment 3 dimmer 14 Static patterns (see chart page 11) 15 Programs (see chart page 11) 16 Speed/sound sens (slow-fast/low-high) No function Strobe (slow-fast) Rubix RGB 3D Panel User Manual 7

8 81 channel mode: Value CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 Pixel 1 Pixel 1 Pixel 1 Pixel 2 Pixel 2 Pixel 2 Pixel 3 Pixel 3 Pixel 3 Pixel 4 Value CH11 CH12 CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH20 Pixel 4 Pixel 4 Pixel 5 Pixel 5 Pixel 5 Pixel 6 Pixel 6 Pixel 6 Pixel 7 Pixel 7 Value CH21 CH22 CH23 CH24 CH25 CH26 CH27 CH28 CH29 CH30 Pixel 7 Pixel 8 Pixel 8 Pixel 8 Pixel 9 Pixel 9 Pixel 9 Pixel 10 Pixel 10 Pixel 10 Value CH31 CH32 CH33 CH34 CH35 CH36 CH37 CH38 CH39 CH40 Pixel 11 Pixel 11 Pixel 11 Pixel 12 Pixel 12 Pixel 12 Pixel 13 Pixel 13 Pixel 13 Pixel 14 Value CH41 CH42 CH43 CH44 CH45 CH46 CH47 CH48 CH49 CH50 Pixel 14 Pixel 14 Pixel 15 Pixel 15 Pixel 15 Pixel 16 Pixel 16 Pixel 16 Pixel 17 Pixel 17 Value CH51 CH52 CH53 CH54 CH55 CH56 CH57 CH58 CH59 CH60 Pixel 17 Pixel 18 Pixel 18 Pixel 18 Pixel 19 Pixel 19 Pixel 19 Pixel 20 Pixel 20 Pixel 20 Value CH61 CH62 CH63 CH64 CH65 CH66 CH67 CH68 CH69 CH70 Pixel 21 Pixel 21 Pixel 21 Pixel 22 Pixel 22 Pixel 22 Pixel 23 Pixel 23 Pixel 23 Pixel 24 Value CH71 CH72 CH73 CH74 CH75 CH76 CH77 CH78 CH79 CH80 Pixel 24 Pixel 24 Pixel 25 Pixel 25 Pixel 25 Pixel 26 Pixel 26 Pixel 26 Pixel 27 Pixel 27 Value CH81 Pixel 27 Rubix RGB 3D Panel User Manual 8

9 83 channel mode: Value CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 Master dimmer Pixel 1 Pixel 1 Pixel 1 Pixel 2 Pixel 2 Pixel 2 Pixel 3 Pixel 3 Pixel 3 Value CH11 CH12 CH13 CH14 CH15 CH16 CH17 CH18 CH19 CH20 Pixel 4 Pixel 4 Pixel 4 Pixel 5 Pixel 5 Pixel 5 Pixel 6 Pixel 6 Pixel 6 Pixel 7 Value CH21 CH22 CH23 CH24 CH25 CH26 CH27 CH28 CH29 CH30 Pixel 7 Pixel 7 Pixel 8 Pixel 8 Pixel 8 Pixel 9 Pixel 9 Pixel 9 Pixel 10 Pixel 10 Value CH31 CH32 CH33 CH34 CH35 CH36 CH37 CH38 CH39 CH40 Pixel 10 Pixel 11 Pixel 11 Pixel 11 Pixel 12 Pixel 12 Pixel 12 Pixel 13 Pixel 13 Pixel 13 Value CH41 CH42 CH43 CH44 CH45 CH46 CH47 CH48 CH49 CH50 Pixel 14 Pixel 14 Pixel 14 Pixel 15 Pixel 15 Pixel 15 Pixel 16 Pixel 16 Pixel 16 Pixel 17 Value CH51 CH52 CH53 CH54 CH55 CH56 CH57 CH58 CH59 CH60 Pixel 17 Pixel 17 Pixel 18 Pixel 18 Pixel 18 Pixel 19 Pixel 19 Pixel 19 Pixel 20 Pixel 20 Value CH61 CH62 CH63 CH64 CH65 CH66 CH67 CH68 CH69 CH70 Pixel 20 Pixel 21 Pixel 21 Pixel 21 Pixel 22 Pixel 22 Pixel 22 Pixel 23 Pixel 23 Pixel 23 Value CH71 CH72 CH73 CH74 CH75 CH76 CH77 CH78 CH79 CH80 Pixel 24 Pixel 24 Pixel 24 Pixel 25 Pixel 25 Pixel 25 Pixel 26 Pixel 26 Pixel 26 Pixel 27 Value CH81 CH82 Value CH83 Pixel 27 Pixel No function Strobe (slow-fast) Rubix RGB 3D Panel User Manual 9

10 98 channel mode: Channel Value Function 1 Master dimmer 2 dimmer 3 dimmer 4 dimmer 5 segment 1 dimmer 6 segment 1 dimmer 7 segment 1 dimmer 8 segment 2 dimmer 9 segment 2 dimmer 10 segment 2 dimmer 11 segment 3 dimmer 12 segment 3 dimmer 13 segment 3 dimmer 14 Pixel 1 15 Pixel 1 16 Pixel 1 17 Pixel 2 18 Pixel 2 19 Pixel 2 20 Pixel 3 21 Pixel 3 22 Pixel 3 23 Pixel 4 24 Pixel 4 25 Pixel 4 26 Pixel 5 27 Pixel 5 28 Pixel 5 29 Pixel 6 30 Pixel 6 31 Pixel 6 32 Pixel 7 33 Pixel 7 34 Pixel 7 35 Pixel 8 36 Pixel 8 37 Pixel 8 38 Pixel 9 39 Pixel 9 40 Pixel 9 Channel Value Function 41 Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel 22 Rubix RGB 3D Panel User Manual 10

11 98 channel mode cont.: Channel Value Function 80 Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel 26 Static patterns 90 Pixel Pixel Pixel Pixel Pixel Static patterns (see chart below) 96 Programs (see chart below) 97 Speed/sound sens (slow-fast/low-high) No function Strobe (slow-fast) Value Function No function Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern 15 Programs Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern Static pattern 50 Value Function No function Program 2 (Fade 1) Program 3 (Fade 2) Program 4 (Fade 3) Program 5 (Fade 4) Program 6 (Change 1) Program 7 (Change 2) Program 8 (Change 3) Program 9 (Change 4) Program 10 (Change 5) Program 11 (Change 6) Program 12 (Change 7) Program 13 (Change 8) Program 14 (Change 9) Program 15 (Change 10) Program 16 (Change 11) Program 17 (Change 12) Program 18 (Change 13) Program 19 (Change 14) Program 20 (Change 15) Program 21 (Change 16) Program 22 (Change 17) Program 23 (Change 18) Program 24 (Change 19) Program 25 (Change 20) Program 26 (Change 21) Program 27 (Change 22) Program 28 (Change 23) Sound active Rubix RGB 3D Panel User Manual 11

12 Auto mode: To access the auto mode, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show AUTO on the LED display. Press the ENTER button to confirm the setting. The unit will now run through all the built-in programs. To exit out of any of the above options, press the MENU button. Built-in program mode: To access the built-in program mode press MENU until the display shows Pro on the LED display. Press the ENTER button and use the UP and DOWN buttons to select a program from Pr.01 ~ Pr.28. To change the speed of programs Pr.02 ~ Pr.28 press the ENTER button and then use the UP and DOWN buttons to select any value from SP.01 ~ SP.FL. Press the ENTER button to confirm the setting, then use the UP and DOWN buttons to select the flash speed value from FL.00 ~ FL.99. Press the ENTER button to confirm the setting. In Pr.01 you are able to set a specific static pattern. When in Pr.01 press the ENTER button and then use the UP and DOWN buttons to go through the static patterns. Press the ENTER button to confirm the setting, then use the UP and DOWN buttons to select the flash speed value from FL.00 ~ FL.99. Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. Master/slave mode: To set the master unit, press the MENU button on the rear of the master unit then select your desired program (sound active, auto, static pattern or one of the built-in programs). To set the other units in slave mode, press the MENU button on the rear of the unit to show SLAu on the LED display and press the ENTER button to confirm the setting. The units will now run in sequence with the master unit. If you would require fully synchronised patterns/colours please ensure the DMX sync setting (page 13) is set to --On. To exit out of any of the above options, press the MENU button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. Colour mix mode: To access the colour mix mode press MENU button until CoLr shows on the LED display. Now press the ENTER button and use the UP and DOWN buttons to select the brightness of segment one red between r1.00 ~ r1.fl. Press the ENTER button and repeat for segment one green (g1), segment one blue (b1), segment two red (r2), segment two green (g2), segment two blue (b2), segment three red (r3), segment three green (g3) and segment three blue (b3). Value: 00 - FL (00 = low brightness, FL = high brightness) To exit out of any of the above options, press the MENU button. Sound mode: To access the sound mode, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show Soud on the LED display. To adjust the sensitivity, press the ENTER button and then use the UP and DOWN buttons to select any value from SU.00 ~ SU.31. Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. Rubix RGB 3D Panel User Manual 12

13 Dimming curve selection: To access the dimming curve setting, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show Set on the LED display. Press the ENTER button and then use the UP and DOWN buttons to select Cur. Press the ENTER button and then use the UP and DOWN buttons to select the required dimming curve from Cu-1 ~ Cu-4. Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. Cu-1 - Linear Cu-2 - Square Law Cu-3 - Inverse Square Law Cu-4 - S-curve DMX signal failure: To access the DMX signal failure setting, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show Set on the LED display. Press the ENTER button and then use the UP and DOWN buttons to select FAIL. Press the ENTER button and then use the UP and DOWN buttons to select either -OFF (blackout) ~ HoLd (hold DMX signal). Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. DMX sync setting: To access the DMX sync setting, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show Set on the LED display. Press the ENTER button and then use the UP and DOWN buttons to select Sync. Press the ENTER button and then use the UP and DOWN buttons to select either --On (fully synchronised patterns/ colours) ~ -Off (patterns/colours run unsynchronised). Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. Reset factory settings: To access the DMX sync setting, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show Set on the LED display. Press the ENTER button and then use the UP and DOWN buttons to select -rst. Press the ENTER button and then use the UP and DOWN buttons to select either --NO or -yes. Press the ENTER button to confirm the setting. To exit out of any of the above options, press the MENU button. Software version: To access the software version, press the MENU button and use the UP and DOWN buttons on the rear of the unit to show InFo on the LED display. Press the ENTER button and then use the UP and DOWN buttons to select uer. Press the ENTER button and the software version will be displayed. To exit out of any of the above options, press the MENU button. Rubix RGB 3D Panel User Manual 13

DMX setup Setting the DMX address: The DMX mode enables the use of a universal DMX controller. Each fixture requires a start address from 1-511.

14 DMX setup Setting the DMX address: The DMX mode enables the use of a universal DMX controller. Each fixture requires a start address from A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100,101,102,103,104,105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the chain starts at 107. DMX 512: DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA IN and DATA OUT XLR terminals located on all DMX fixtures (most controllers only have a data out terminal). DMX linking: DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned to a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain. DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 2m CABL11 5m CABL12 10m Note: DMX cable must be daisy chained and cannot be split. Rubix RGB 3D Panel User Manual 14

15 DMX setup Notice: Be sure to follow the diagrams below when making your own cables. Do not connect the cables shield conductor to the ground lug or allow the shield conductor to come in contact with the XLRs outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: Line termination: When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behaviour. Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89) Termination reduces signal transmission problems and interference. It is always advisable to connect a DMX terminal, (resistance 120 Ohm 1/4 W) between pin 2 (DMX-) and pin 3 (DMX+) of the last fixture. 5-pin XLR DMX connectors: Some manufactures use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion. 5-pin XLR (female) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C 3-pin XLR (male) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+) 3-pin XLR (female) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+) 5-pin XLR (male) Pin 1: GND (screen) Pin 2: Signal (-) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C Rubix RGB 3D Panel User Manual 15

16 WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Rubix RGB 3D Panel User Manual 16

DM 800H Twin Handheld UHF System (863.0Mhz-865.0Mhz)

DM 800H Twin Handheld UHF System (863.0Mhz-865.0Mhz) User Manual Order code: MIC78 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before