ACC Automotive Coating Center GmbH & Co. KG Steinbeisstraße Urbach Baden-Württemberg Deutschland Telefon Fax

Size: px
Start display at page:

Download "ACC Automotive Coating Center GmbH & Co. KG Steinbeisstraße Urbach Baden-Württemberg Deutschland Telefon Fax"

Transcription

1 ACC Automotive Coating Center GmbH & Co. KG Steinbeisstraße Urbach Baden-Württemberg Deutschland Telefon Fax info@acc-automotive.com Web

2

3 Paint-Shop 4-Zone Power-Wash with air pressured drying area Hands off paint supply 2-comp. paint supply Fully automated robot paintings Annual paint capacity: sqm. Parts between > 0 to 2000 x 1200 mm Paint frames are able to rotate 180 for 3-D paintings as well as for double-sidepainting. Fully automated paint plant with robots. Air conditioned, production takes place under clean room conditions 4-Zone Power-Wash Titan-Zirkonium-Passivation paint layer systems Contrast colours, car colour paintings, softfeeling-paints. Water based paint systems as well as solvent based paints. Metal-parts, plastic components, corrosion protection systems

4 Paint-Shop surrounding Assembly area of the paint plant 100% inspection area Removal area of paint stands Single inspection areas Online-conveyor-inspection area Immission controlled, authority approved paint plant For water- and solvent based paint systems. Flexible Power- & Free- conveyor enabling a great variety of paint systems. Single skid decoding with barcode system. Fully automated paint plant run of the single skid with highest reproduction accuracy. State of the art 2K-paint supply technique and fully automated rinse and cleaning equipment affects our constant high quality level even when using different colours in high frequency.

5 The spezialists Online-conveyor inspection Assembly area, inspection area: 1000 sqm Fully automated Robot paintings Inspection area Drying after 4-Zone Power-Wash Tamponprint Regenerative post combustion furnace Assembly Paint supply Single inspection areas Friction welding

6 News in 2016 Flaming cabin Flaming cabine for pretreating PP-Plastic parts: Robot: FANUC M710iC/20L Turning station in front of the robot to treat 3-D parts Side channel blowers Visualisation Ongoing process monitoring

7 Product range 01 Vents VW Polo Center and Side painted in Satin Schwarz, 1-layer-paintsystem with additional tamponprint carsets / a Vents Golf Plus painted in Titanschwarz, assembly and painting carsets / a Vents Audi D5 1-layer-paintsystem in 3 colours, carsets / a

8 Product range 02 Ashtray BR222, BLACK-PEARL, BEIGE-PEARL and GRAY-PEARL, 2-layer-paintsystem carsets / a Rosetten W205 painted in Nürburgsilber, 3-layer-paintsystem carsets / a

9 Product range 03 VS20 Vito ECO VS20 Vito MID VS20 Vito Frontframe painted with 2K Hydro-Soft-Dekor-Lack MB 9116 Black, 2-layer-paintsystem, Injection mould frame and glas, Chrom-Ring, painting of frame, assembly Chrom-Rings, friction welding frame / glas, carsets / a

10 Product range 04 Fond table BR 222 painted with basecoat chrome 3 matt, aluminium- / magnesium- and plastic parts, 2-/ 3-layer-paintsystem, carsets / a

11 Product range 05 Porsche 991 Targa, 47 different pats in 7 different colours, 2-layer-hydro-paintsystem, carsets / a

12 Product range 06 Porsche 991 Targa

13 Product range 07 W246: Tubenplatte, painted with 1-layer-paintsystem 9116 Schwarz and Einlegeteil Brücke, painted with 2-layer-paintsystem Silver Shine, carsets / a

14 Product range 08 Painting of 27 parts for AUDI Q7, approx carsets / a Painting in Eloxal anthrazit (primer / base coat) and chrom paint schiefergrau (primer / base coat / clear coat) and black highgloss, approx carsets / a

15 Product range 09 W205 Systembody 2-layer-paintsystem primer and MID-SOFT-Lasercoating with lasering, parts / a

16 Product range 10 Passat B8 HUD Head-up-Display Frame and cover 2-layer-paintsystem in Titanblack, Deep Blue und Raven, approx carsets / a

17 Product range 11 Bentley roof module button und panel 2-layer-paintsystem in 2K-Laserpaint SP 2200 black with lasering, approx carsets / a

18 Product range 12 BMW I3 2-layer-paintsystem with primer and comfortpaint black 90BC, approx carsets / a

19 Product range 13 Daimler ATEGO, AXOR, ACTROS, SFTP, G-Klasse, primer MB 9135, approx parts / a

20 Product range 14 Mini Cooper R60 black highgloss and silver carsets / a

21 Product range 15 BMW motorcycle add-on components Aluminium die casting painted in Ostragrau, Magnesium, Platin und Weißalu III, 3-layer-paintsystem, sets / a

22 Product range 16 BMW motorcycle add-on components painted in Weißalu III, 3-layer-paintsystem, parts / a

23 Product range 17 BMW K48 main frame out of alu die casting with 104 masking spots, painted in Ostragrau, Magnesium and Platin, 2-layer-paintsystem, parts / a

24 Quality management Cross-cut check Continuous condensation testing acc. DIN EN ISO Closs testing Paint thickness measurement Colour sample cabine

25 Quality management microscope inspections We look on the parts as well as in the parts Stereomicroscope reflected light microscope

26 Quality management - colorimetry Colour meassurement equipment: X-Rite MA 68 II Konica Minolta CM-700d

27 Extract of our customers

28 Contacts Managing Director: Michael Muth Business Admin. Manager: Bernd Jocher Projectmanagement: Maximilian Muth

your long-term reliable partner

your long-term reliable partner Corporate Profile your long-term reliable partner 2018 Ozay Dokum www.ozaydokum.com 1 Key Figures - Integrated production facilities - 25 years of experience - 10.000 m 2 area - 120 employees - 45% export

More information

International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications

International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications 1 2 International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications Joachim Gundlach, Jörg Detering Contents 3 Company Information

More information

Content. Hot-dip galvanized narrow strip. Areas of application. Product information

Content. Hot-dip galvanized narrow strip. Areas of application. Product information Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing

More information

PRODUCT BROCHURE HP-L Laser Scanner for ROMER Absolute Arm

PRODUCT BROCHURE HP-L Laser Scanner for ROMER Absolute Arm PRODUCT BROCHURE HP-L-20.8 Laser Scanner for ROMER Absolute Arm 2 HP-L-20.8 LASER SCANNER FOR ROMER ABSOLUTE ARM FAST ACCURATE VERSATILE The new laser scanner by Hexagon Metrology Designed for ROMER Absolute

More information

1K Top coats KFZ / NFZ

1K Top coats KFZ / NFZ Peter Kwasny GmbH, Heilbronner Strasse 96, 74831 Gundelsheim / Germany Phone +49 (0) 6269-95-0, Fax: +49 (0) 6269-95-80 internet: www.kwasny.de e-mail info@kwasny.de EU-GB 1K Top coats KFZ / NFZ TECHNOLOGY

More information

CHROME SUBSTITUTE WITH BERLAC REFLEXION: THE ECO-FRIENDLY ALTERNATIVE FROM SIMPLE LACQUER COATING.

CHROME SUBSTITUTE WITH BERLAC REFLEXION: THE ECO-FRIENDLY ALTERNATIVE FROM SIMPLE LACQUER COATING. CHROME SUBSTITUTE WITH BERLAC REFLEXION: THE ECO-FRIENDLY ALTERNATIVE FROM SIMPLE LACQUER COATING. www.berlac.ch REACH: CHROMIUM(VI)-COMPOUNDS. Registration Evaluation Autorisation Chemicals Introduction

More information

Tuk-Rivet Punched rivet system

Tuk-Rivet Punched rivet system Tuk-Rivet Punched rivet system The process Punch riveting with a solid rivet permits one or more joined elements such as semi-finished product types, sheet, profile and cast components to be fastened together.

More information

Automobile Painting in the BRIC Countries - Quality at low Cost - Dr. Hans Schumacher, Dürr Systems GmbH

Automobile Painting in the BRIC Countries - Quality at low Cost - Dr. Hans Schumacher, Dürr Systems GmbH Automobile Painting in the BRIC Countries - Quality at low Cost - Dr. Hans Schumacher, Dürr Systems GmbH Paris, June 11/12, 2009 Automobile Painting in BRIC Countries Quality at low Cost? Appropriate Quality

More information

Vostermans Alu Foundries

Vostermans Alu Foundries Vostermans Alu Foundries Vostermans Alu Foundries B.V. is models, dies and tools. Their extensive part of Vostermans Companies. This network at home and abroad provides cooperation provides various direct

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Express Surfacer 5250. Permasolid HS Express Surfacer 5250 is a high-grade, productive, VOCcompliant 2K HS sanding surfacer based on acrylic resins. Very good application

More information

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal

More information

Hauschild GmbH. Magazine systems, Process automation, Robotic machining cells, Sorters

Hauschild GmbH. Magazine systems, Process automation, Robotic machining cells, Sorters GmbH Hauschild Hauschild GmbH Kohlfurther Brücke 69 42349 Wuppertal Germany Tel.: +49 202 24742-0 Fax: +49 202 24742-42 info@hauschildgmbh.com www.hauschildgmbh.com Magazine systems, Process automation,

More information

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,

More information

ZHM CT Series. Technical Datasheet. Gear Flow Meters in Cartridge Design for paint applications, optimized with regard to flushing and to weight

ZHM CT Series. Technical Datasheet. Gear Flow Meters in Cartridge Design for paint applications, optimized with regard to flushing and to weight www.kem-kueppers.com Technical Datasheet ZM CT Series Gear Flow Meters in Cartridge Design for paint applications, optimized with regard to flushing and to weight Certified zertifiziert according gemäß

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,

More information

Etanorm, RPH, Multitec, CPK, Movitec, Ama-Porter, UPA. Circulator, service water (Rio series) and in-line pumps (Etaline, Trialine)

Etanorm, RPH, Multitec, CPK, Movitec, Ama-Porter, UPA. Circulator, service water (Rio series) and in-line pumps (Etaline, Trialine) 1 1. General In order to showcase the high standard of quality of KSB products at trade fairs, exhibits must always be in a perfect condition. On principle, there must be no difference in appearance between

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permahyd Hi-TEC Base Coat 480 Blending system for two-stage colours To achieve a perfect colour transition in the blending area or from repair to adjacent areas, e.g. wing / door.

More information

Autobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015

Autobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015 Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be

More information

Berkenhoff GmbH. Company profile. Berkenhoff /

Berkenhoff GmbH. Company profile. Berkenhoff / Berkenhoff GmbH Company profile Berkenhoff in detail Under its corporate trademark bedra (Berkenhoff Draht) Berkenhoff produces and distributes innovative non-ferrous wires for spark erosion welding electronics

More information

Eckold GmbH & Co. KG. Clinchen. Stanznieten. Umformen. Bördeln. Falzen. Stanzen 1 / ENG-2.6

Eckold GmbH & Co. KG. Clinchen. Stanznieten. Umformen. Bördeln. Falzen. Stanzen 1 / ENG-2.6 Eckold GmbH & Co. KG Clinchen Stanznieten Umformen Bördeln Falzen Stanzen 1 / 31.03.15 ENG-2.6 Eckold Company figures medium sized company founded in 1936 120 employees in Germany / approx. 200 wold wide

More information

Three metals for one goal: Your success Die castings made of Aluminium, Magnesium & Zinc Lightweight construction & system components

Three metals for one goal: Your success Die castings made of Aluminium, Magnesium & Zinc Lightweight construction & system components Three metals for one goal: Your success Die castings made of Aluminium, Magnesium & Zinc Lightweight construction & system components www.power-cast.com 3 metals 1 goal: # your success Aluminium, Magnesium,

More information

Converting a Bachmann Class 45 model to 45133

Converting a Bachmann Class 45 model to 45133 Converting a Bachmann Class 45 model to 45133 Bachmann have yet to produce an accurate OO gauge model of a Class 45/1. The 45/1s that have been produced were let down by the presence of steam heat details

More information

Agenda. Group Overview. 3 Further information. Focus on Sirone plant & our Core Business

Agenda. Group Overview. 3 Further information. Focus on Sirone plant & our Core Business Agenda 1 Group Overview 2 Focus on Sirone plant & our Core Business 3 Further information Who we were Our history The 1 st tool-shop Co.stamp was founded back in 1968. A small workshop with few employees,

More information

OBO - Your partner for the realisation of your ideas!

OBO - Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making OBO - Your partner for the realisation of your ideas! The company OBO-Werke GmbH & Co. KG was established

More information

Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002

Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for

More information

Design DESIGN THE CHALK DESIGN IS AN EXCLUSIVE AND REGISTERED PROPERTY OF PREMEC.

Design DESIGN THE CHALK DESIGN IS AN EXCLUSIVE AND REGISTERED PROPERTY OF PREMEC. CO LOU RS MAT TER Design THE CHALK DESIGN IS AN EXCLUSIVE AND REGISTERED PROPERTY OF PREMEC. DESIGN Essential and iconic, the Chalk pen has harmonic proportions and refined details. Shape is simple and

More information

miramondo Technical Informations 1/6 Il Posto L

miramondo Technical Informations 1/6 Il Posto L 1/6 Il Posto L Technical Informations public design GmbH - Miramondostr. 6-2504 Sooss - Austria - office@.com - www..com Il Posto L 2/6 Dimensions 654 165 654 Convex Dimensions 654 165 440 625 public design

More information

Product Information DP5000

Product Information DP5000 GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range

More information

Product Information Deltron D894 High Solids Clear

Product Information Deltron D894 High Solids Clear GLOBAL REFINISH SYSTEM May 2012 Product Information Deltron High Solids Clear PRODUCTS Deltron HS Clear Deltron HS Hardeners D897, D8208 Deltron MS Hardener D803, D841, D861, D864 Deltron Thinners D808,

More information

rapid casting development with simulation and QMC

rapid casting development with simulation and QMC 1 Rapid casting development by means of Qualified Master Casting (QMC) and numerical simulation modeling Dr. Joachim Gundlach Grunewald 2008 2 1. Grunewald 2. Rapid Prototyping techniques 3. casting development

More information

Taco Bell Restaurant kit in HO scale

Taco Bell Restaurant kit in HO scale Taco Bell Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic, clear window glazing, Plastruct tile roofing, and logo

More information

Delphi Automotive Systems Luxembourg SA - Powertrain Systems

Delphi Automotive Systems Luxembourg SA - Powertrain Systems Delphi Automotive Systems Luxembourg SA - Powertrain Systems Activities Staff number >=250 Turnover 178,208,566 EUR in 2013 Description of activities Delphi is one of the world leading suppliers to the

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal R3G9-RB- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Improving the economic efficiency of steel polishing

Improving the economic efficiency of steel polishing SEITE 1 This newsletter appears several times a year, informing Menzerna customers about Menzerna projects and innovations. Ötigheim, March 2017 Contact menzerna polishing compounds GmbH & Co. KG Industriestrasse

More information

Innovative Branded Choices

Innovative Branded Choices 2013 2013 Innovative Branded Choices 2 0 1 3 Bags Meeting Travel Outdoor & Leisure Drinkware Housewares Writing Instruments Office Technology Clocks Personal, Health & Wellness Flashlights, Tools & Auto

More information

Technical Data Sheet.

Technical Data Sheet. Technical Data Sheet. Permasolid HS Automotive Top Coat 275. Permasolid HS Automotive Top Coat 275 is a High-Solid top coat system for solid colours. It is used for passenger car finishes. The comprehensive

More information

miramondo Technical Informations 1/6 Passepartout Concrete

miramondo Technical Informations 1/6 Passepartout Concrete 1/6 Passepartout Concrete Technical Informations Passepartout Concrete 2/6 Dimensions 590 600 1785 590 600 1785 250 150 400 700 Hole pattern for mounting 590/1785 504/1699 43 590 324 133 D 12 Passepartout

More information

Direct Printing Technology

Direct Printing Technology Direct Printing Technology A new dimension for aircraft decoration VILF Jahrestagung 2018 Matthias OTTO Multi-Programme Paint Center Hamburg 08. November 2018 External Paint General paint process Roll

More information

2014 HSC Industrial Technology Metal and Engineering Technologies Marking Guidelines

2014 HSC Industrial Technology Metal and Engineering Technologies Marking Guidelines 2014 HSC Industrial Technology Metal and Engineering Technologies Marking Guidelines Section I Multiple-choice Answer Key Question Answer 1 A 2 B 3 B 4 A 5 B 6 D 7 C 8 A 9 D 10 C 1 Section II Question

More information

Fitting and Operating Instructions

Fitting and Operating Instructions ISO 9001:2008 Zert.-Nr. 01 100 89747 ISO 14001:2004 Zert.-Nr. 01 104 069609 Metall- und Plastikverarbeitungs- GmbH & Co. KG Kierspe Internet: www.mpk-kierspe.de Fitting and Operating Instructions GB Rooflight

More information

NOCOLOK Technical Brazing Center and Technical Service

NOCOLOK Technical Brazing Center and Technical Service NOCOLOK Technical Brazing Center and Technical Service The NOCOLOK Brazing Technical Center NOCOLOK flux brazing technology is the industry standard for brazing aluminum heat exchangers and other components.

More information

Cleaning Procedure INTRODUCTION:

Cleaning Procedure INTRODUCTION: Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing

More information

2013 SKILLS CANADA NATIONAL COMPETITION

2013 SKILLS CANADA NATIONAL COMPETITION 2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION POST SECONDARY Car Painting Total Time allocated: 12 hours FENDER PROJECT You will prime and paint a fender laser red tri- coat,

More information

Sun On Enterprises Group Ltd

Sun On Enterprises Group Ltd Sun On Industrial Park No. 88, Hongying Gongyeyuan, Hongshi Bridge, Fenggang Town, Dong Guan City, 527300, Guangdong, P.R.China Our History: 1995, Mr. George Cheung established Sun On Plastic Moulding

More information

Anodising is the process where Aluminum Oxide film is created on the section to avoid corrosion. (The tanks used are nos. 16, 17, 19 and 20)

Anodising is the process where Aluminum Oxide film is created on the section to avoid corrosion. (The tanks used are nos. 16, 17, 19 and 20) ABOUT ANODISING Our New anodizing plant was commissioned in October 2012. Ours is a fully automated plant and the plant is completely designed and commissioned by the Monti Engineering from Italy. The

More information

EMG SOLID Oil layer measurement. Two technologies from one source: Infrared spectroscopy Laser-induced fluorescence spectroscopy

EMG SOLID Oil layer measurement. Two technologies from one source: Infrared spectroscopy Laser-induced fluorescence spectroscopy EMG SOLID Oil layer measurement Optimise your oiling and forming process! Two technologies from one source: Infrared spectroscopy Laser-induced fluorescence spectroscopy EMG SOLID ement r u s a e m r e

More information

True flatbed. True quality. True value.

True flatbed. True quality. True value. :Anapurna M2540 FB True flatbed. True quality. True value. :Anapurna M2540 FB is a high-speed flat-bed, UV-curable inkjet printer for graphic screen printers, photo shops and sign shops. With a true flat-bed

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA

More information

May 2012 Product Information GRS Deltron D800

May 2012 Product Information GRS Deltron D800 GLOBAL REFINISH SYSTEM May 2012 Product Information GRS Deltron Clear PRODUCTS Deltron Clear Deltron Medium Solids Hardeners D803, D841, D861 Deltron Accelerated Medium Solids Hardener D864 Deltron Standard

More information

Series E2000P. Electrical linear actuator. Features SPECIFICATION. Valve Division Wörth am Main. A. Hock MSR- und Electronic Service GmbH

Series E2000P. Electrical linear actuator. Features SPECIFICATION. Valve Division Wörth am Main. A. Hock MSR- und Electronic Service GmbH A. Hock MSR- und Electronic Service GmbH Valve Division Series E2000P Electrical linear actuator SPECIFICATION The cover and switching mechanism design of the linear actuators for a wider range of applications,

More information

EC centrifugal fan. forward curved, single inlet with housing (flange)

EC centrifugal fan. forward curved, single inlet with housing (flange) ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

Product Art.no. Ø Wall thickness Meter per mm mm bundle

Product Art.no. Ø Wall thickness Meter per mm mm bundle Chrome Plated Tubes Direct plated finishes on welded steel tubes manufactured to DIN 2394. Only the very best quality of surface finish steel is used in the production of our tube. Product Art.no. Ø Wall

More information

Your Idea We Achieve

Your Idea We Achieve - 2015 - PRESENTATION Your Idea We Achieve www.camelengineering.com Overview Presentation 1. COMPANY PROFILE 2. MARKET SHARE & INDUSTRIES 3. PROJECTS MANAGEMENT PROCESS 4. EUROPE ENGINEERING LOCATION (AUSTRIA)

More information

Hahn-Schickard Stuttgart

Hahn-Schickard Stuttgart Hahn-Schickard Stuttgart Hahn-Schickard Applied research for industry Budget 2016: 23,1 Mio. (5,1 Mio. industry) Employees 2016: 181 FTE (228 persons) Part of the Innovation Alliance Baden-Württemberg

More information

STEINBICHLER 25 YEARS OF INSPIRING INNOVATION ABIS OPTICAL SURFACE INSPECTION

STEINBICHLER 25 YEARS OF INSPIRING INNOVATION ABIS OPTICAL SURFACE INSPECTION STEINBICHLER ABIS OPTICAL SURFACE INSPECTION 25 YEARS OF INSPIRING INNOVATION 25 YEARS OF INSPIRING INNOVATION EXPERTISE AND EXPERIENCE IN OPTICAL 3D MEASUREMENT TECHNOLOGY 25 years of experience and expertise

More information

TRUMPF Group Business Divisions

TRUMPF Group Business Divisions State of the art laser systems for materials processing Carsten Keim International Sales Lasers and Laser Systems TRUMPF Laser- und Systemtechnik GmbH TWI Cambridge, UK 07 July 2009 TRUMPF - State of the

More information

Textiles Nonwovens. belting. Siegling total belting solutions

Textiles Nonwovens. belting. Siegling total belting solutions Textiles Nonwovens belting Siegling total belting solutions in the nonwoven and clothing industry As the worldwide leading manu facturer of conveyor and processing belts made of modern synthetics, Forbo

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Titanium. The most biocompatible metal. Dentaurum. shop.dentaurum.com

Titanium. The most biocompatible metal. Dentaurum. shop.dentaurum.com . The most biocompatible metal. Dentaurum Online Shop shop.dentaurum.com 207 High-tech in dentistry. Titanium is not only used in the aerospace industry but also in many different areas in medicine. It

More information

PRODUCTS. INDUSTRY Sector. Repair and Maintenance

PRODUCTS. INDUSTRY Sector. Repair and Maintenance PRODUCTS INDUSTRY Sector Repair and Maintenance Philosophy Table of contents SprayMax Technology - Made in Germany The evolution of the spray can technology began in the 1920s. Initially only registered

More information

The Rubley Building Instructions for Assembly of the N scale kit. v1.1

The Rubley Building Instructions for Assembly of the N scale kit. v1.1 The Rubley Building Instructions for Assembly of the N scale kit. v1.1 Kit Contents: 197 ea. laser cut 1/16" acrylic parts. 1ea. adhesive backed.020 styrene part. 10 ea..060 x 1" styrene alignment pins.

More information

A-LF-Sea. Application Manual for M&R. (Full blasting)

A-LF-Sea. Application Manual for M&R. (Full blasting) Application Manual for M&R (Full blasting) April 2015 1 Contents 1.Standard scheme 1)Standard scheme for flat & vertical bottom 2)Colour scheme for system 2.High pressure fresh water washing (HPFWW) 1)Timing

More information

1. General Information Background Information Validity Basic Requirements Drawings and their Information...

1. General Information Background Information Validity Basic Requirements Drawings and their Information... TABLE OF CONTENT 1. General Information...3 1.1. Background Information...3 1.2. Validity...3 1.3. Basic Requirements...4 1.4. Drawings and their Information...5 2. Documentation: Certificates and NDT...6

More information

» Pinnacle Table Top Frames

» Pinnacle Table Top Frames » Pinnacle Table Top Frames Contents Page Gallery Solutions Collage Frames 3 Gallery Solutions Wall Decor 14 Gallery Perfect Your Own Gallery 19 Pinnacle Table Top Frames 22 Snap Photo Frames 36 2 » Gallery

More information

Seiatsu Air-Flow Squeeze Moulding Process.

Seiatsu Air-Flow Squeeze Moulding Process. Seiatsu Air-Flow Squeeze Moulding Process www.sinto.com SEIATSU... the process for producing consistently perfect moulds. The process sequence. The SEIATSU air flow squeeze moulding process is a method

More information

SURFACE FINISH MAINTENANCE

SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE Lumec strongly recommends that you maintain your luminaires twice a year in order to prolong the appearance of the finished surface. By following this

More information

People & Print. ICMA EuroForum

People & Print. ICMA EuroForum People & Print ICMA EuroForum October 2015 General trends and impact valid for all print applications Urbanisation Globalization Mobility New Work New Learning more and faster orders with smaller quantities

More information

WSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.

WSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. - SPRINT Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. Limited partnership, based in DE-42579 Heiligenhaus, Local court Wuppertal, HRA 20804 Personal liable partner:

More information

SYSTEM INFORMATION Glasurit 55 Line procedure

SYSTEM INFORMATION Glasurit 55 Line procedure 1. Edge to edge repair 1-0 Process description Paint system with improved surface hardness for Nissan GT-R with Line 55. 1-1.Application of surfacer Apply 801-72 according to 801-72 technical information.

More information

KFS. Flap-type flow meter. Design and range of application

KFS. Flap-type flow meter. Design and range of application Design and range of application The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is

More information

Precision Innovation Complexity

Precision Innovation Complexity Precision Innovation Complexity Complexity & cost control Nature is the model Highly complex forms in nature have often served as a basis for the design of new components and systems; their complete realisation

More information

Caravan Materials. Engineered to Perform Better

Caravan Materials. Engineered to Perform Better Caravan Materials Engineered to Perform Better ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Perform Better - www.orafol.com Index Caravan Materials

More information

Chassis. 340 range. Digital-brochure-340-Chassis-02-SR

Chassis. 340 range. Digital-brochure-340-Chassis-02-SR Digital-brochure-340-Chassis-02-SR-180725-1453 (1/2) Chassis. Innovative. Multipurpose. Appealing. Virtually no other chair has caused more of a stir in the design world than multipurpose chair Chassis.

More information

SPS TECHNIK. everything from a single source

SPS TECHNIK. everything from a single source SPS TECHNIK everything from a single source planning and execution simulation electrics and mechanics design production, mounting software development commissioning after-sales service PRODUCTS AND SERVICE

More information

EC centrifugal fan - RadiCal

EC centrifugal fan - RadiCal RG-RD- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Specification D data models

Specification D data models Previous Edition Specification 2017-04 Class: Dimensions, tolerances Class No.:01 Documentation of components by means of 3D data models 516 Part name (for databases) 2009-09 3D data models 852 005 160

More information

MEFA mounting accessories

MEFA mounting accessories MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance

More information

Application Guide for Jotun Primax Diamond Powder Coatings

Application Guide for Jotun Primax Diamond Powder Coatings for Jotun Primax Diamond Application Guide for Jotun Primax Diamond Powder Coatings Date of Last Revision: August 2017 Page 1 of 7 Contents 1.0 Introduction 3 2.0 General overview 3 3.0 Safety Considerations..3

More information

Value Through Solutions

Value Through Solutions 1 2 The information contained within this presentation is intended solely as a guide for the customers of Semblex Corporation. This information may not be copied or distributed beyond the initial audience

More information

Multichem Sp. z o.o.

Multichem Sp. z o.o. Product Info Table of Contents Aqua 2G Waterborne base coat....4 JetBlack Special coat 1K....34 Sachet WAX (NEW) Fine compound Wax 4....58 2-001 (NEW) Aqua eco binder....6 CP 582 Bumper Acrylic lacquer

More information

AC diagonal compact fan

AC diagonal compact fan WE8-BA- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Scalecoat Model Paint

Scalecoat Model Paint Scalecoat Model Paint All Scalecoat Paints are a solvent based enamel. Scalecoat I Paint is for Metal and Wood Scalecoat II Paint is for Plastic Scalecoat Model Paint A division of MinuteMan Scale Models

More information

THE SOLUTION FOR THE EXTRUSION & CONVERTING INDUSTRY WEB INSPECTION SYSTEM FSP600. Clear visions and clear results.

THE SOLUTION FOR THE EXTRUSION & CONVERTING INDUSTRY WEB INSPECTION SYSTEM FSP600. Clear visions and clear results. THE SOLUTION FOR THE EXTRUSION & CONVERTING INDUSTRY WEB INSPECTION SYSTEM FSP600 Clear visions and clear results The original by WEB INSPECTION SYSTEM FSP 600 COOPERATIONS The Web Inspection System FSP600

More information

Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E

Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK 150-275 WA 1 - Ü 150 E 1 F Ü R D I E ZU K U N FT G E DAC HT. The alwitra waterproofing system alwitra wall flashing profiles are part of the practically

More information

Design and applications

Design and applications Design and applications The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated

More information

Product Art.no. Ø Wall thickness Meter per mm mm bundle

Product Art.no. Ø Wall thickness Meter per mm mm bundle Chrome Plated Tubes Direct plated finishes on welded steel tubes manufactured to DIN 2394. Only the very best quality of surface finish steel is used in the production of our tube. Product Art.no. Ø Wall

More information

Extra Life : For Powder Coatings and Wet Paint

Extra Life : For Powder Coatings and Wet Paint ra Life : For Powder Coatings and Wet Paint Preparation Coating systems are only as effective as the surface to which they are applied. Therefore, correct preparation is essential to ensuring the system

More information

Universal Sheet Metal Testing Machines. for Research, Development and In-process Testing

Universal Sheet Metal Testing Machines. for Research, Development and In-process Testing Universal Sheet Metal Testing Machines for Research, Development and In-process Testing Application - Example: Automotive Industry Models - Technical Data - Additional Control Functions and Test Methods

More information

M70LL Laser Distance Sensor

M70LL Laser Distance Sensor M7LL Laser Distance Sensor for automated manufacturing with Ethernet interface to connect with PLC The analog sensors of series M7LL use a PSD for their receiver optics. This assures a position measurement

More information

Introduction ORANGE PEEL / DOI. Structure size. Color Physical Properties Technical Service Index

Introduction ORANGE PEEL / DOI. Structure size. Color Physical Properties Technical Service Index Introduction The total appearance and the visibility of structures depend on the structure size, the observing distance and the image forming quality. Structure size Surfaces with different structure sizes

More information

Improve your productivity fast

Improve your productivity fast Improve your productivity fast Executive summary: Up until the recent downturn in the oil and gas industry the previous decade saw unprecedented levels of new construction projects across many industry

More information

2013 SKILLS CANADA NATIONAL COMPETITION

2013 SKILLS CANADA NATIONAL COMPETITION 2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION SECONDARY Car Painting Total Time allocated: 12 hours FENDER PROJECT You will prime and paint a fender, as if it is a used OEM

More information

We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting

We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,

More information

CONCEPT MODELS UTLX 80006,80020 CRYOGENIC TANK CAR KIT INSTRUCTIONS Sheep Ranch Rd. Mountain Ranch, CA 95246

CONCEPT MODELS UTLX 80006,80020 CRYOGENIC TANK CAR KIT INSTRUCTIONS Sheep Ranch Rd. Mountain Ranch, CA 95246 CONCEPT MODELS Web Address: http://www.con-sys.com Email: concept_models@con-sys.com 8331 Sheep Ranch Rd. Mountain Ranch, CA 95246 UTLX 80006,80020 CRYOGENIC TANK CAR KIT INSTRUCTIONS 2 CONCEPT MODELS

More information

SURFACE FINISHING FOR TOMORROW S CHALLENGES. Traditional Innovative Sustainable

SURFACE FINISHING FOR TOMORROW S CHALLENGES. Traditional Innovative Sustainable SURFACE FINISHING FOR TOMORROW S CHALLENGES Traditional Innovative Sustainable Treat your surfaces to the best. Milestones in surface finishing 1960 First (metal) surface finishing plant, 1979 First painting

More information

Engineered to order. Microtherm delivers added value

Engineered to order. Microtherm delivers added value Engineered to order Microtherm delivers added value - Microtherm has the know how, technology and experience to give your innovation marketability (TS 16949) - In addition to the R&D-process, Microtherm

More information

Metal coatings analysis using the handheld Agilent 4100 ExoScan FTIR

Metal coatings analysis using the handheld Agilent 4100 ExoScan FTIR Metal coatings analysis using the handheld Agilent 4100 ExoScan FTIR In situ anozidation thickness measurement Application Note Author John Seelenbinder Agilent Technologies, Connecticut, USA Abstract

More information