GUN CASE for AZ3 HTE 2 14 MULTIPLE GUN CASE 14 Impact controller, Swivel quick coupling, Universal wrench 15 Supports for gravity guns

Transcription

1 ontents Products Models Pages manual spray guns: AZ3 HTE2/AZ3 HTE2 AV/AZ3 HTE2 P AV/AZ3 HTE2 HVLP gravity feed 2 AZ30 HTE gravity feed 4 AZ40 HTE AV gravity feed 6 AZ10 HTE AV & AZ10 HTE SE suction feed 8 AZ10 HTE SP AV & AZ10 HTE P pressure feed 10 AZ5 round pattern - gravity feed 12 accessories: MIX & SPRAY disposable gravity feed cup 14 GUN ASE for AZ3 HTE 2 14 MULTIPLE GUN ASE 14 Impact controller, Swivel quick coupling, Universal wrench 15 Supports for gravity guns garage equipment: AZ PVA & AZ PVA TN for body coating 16 P6 & PL6 for oil, fuel, petroleum and detergents 17 AE7 for mixed air and water GI10TDP & GI10TLS tyre inflating equipment 18 INFLATION HEADS S8 & SP8 blowing gun 19 ST/ ST1 & ST1 S sandblasting gun 20 superseded gun: AZ40 HTE SP & AZ40 HTE SP AV spares 21 TRADING TERMS 22 NOTE: This price list is valid from All prices/codes/designs are subject to be changed without previous notice. 1

2 AZ3 HTE 2 Manual Spray Gun AZ3 HTE 2 Air Nipple: Fluid Nipple: Model G1/4 G1/4 AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE Gravity spray gun AZ3 HTE 2 P 2 ertifications Model AZ3 HTE2 Test Transfer Efficiency according to EN Authority IPA Fraunhofer Institut Date 28/03/2008 THREE OAT SYSTEM PRIMER 87 % BASEOAT 83 % LEAROAT 74 % DELARATION OF ONFORMITY ertification available on Transfer efficiencies achieved with the materials detailed in the test report were: We AIR GUNSA s.r.l. - orso Vigevano, Torino - Italy declare, under our sole responsibility, that the product: AZ3 HTE2 SPRAY GUN series to which this declaration relates, is in conformity with European ATEX Directive 94/9/E for use in zone 1 and zone 2 and Machinery Directive 98/37/E. According with the following international requirements: EN , EN and EN Name and position of issuer: Mr. Marco G. VIENTINI, Managing Director Firma: data: 04/04/2008 This is an original E declaration of conformity issued by AIR GUNSA s.r.l. Other copies are considered not valid

3 AZ3 HTE 2 Manual Spray Gun cc Akulon cup cc Pressurized cup USE: ode Description ref. AZ3 HTE2 GRAVITY SPRAY GUN + 600cc AKULON UP W0SPG80AG10 GRAVITY SPRAY GUN + AKULON UP ø 1,0 600cc 89,21 W0SPG80AG13 GRAVITY SPRAY GUN + AKULON UP ø 1,3 600cc 89,21 W0SPG80AG15 GRAVITY SPRAY GUN + AKULON UP ø 1,5 600cc 89,21 W0SPG80AG18 GRAVITY SPRAY GUN + AKULON UP ø 1,8 600cc 89,21 W0SPG80AG20 GRAVITY SPRAY GUN + AKULON UP ø 2,0 600cc 89,21 W0SPG80AG25 GRAVITY SPRAY GUN + AKULON UP ø 2,5 600cc 89,21 W0SPG80AG28 GRAVITY SPRAY GUN + AKULON UP ø 2,8 600cc 89,21 W0SPG80AG30 GRAVITY SPRAY GUN + AKULON UP ø 3,0 600cc 89,21 W0SPG80AG35 GRAVITY SPRAY GUN + AKULON UP ø 3,5 600cc 89,21 AZ3 HTE2 GRAVITY SPRAY GUN + 600cc AKULON UP &AIR FLOW ONTROL VALVE W0SPG81AG10 GRAVITY SPRAY GUN + AKULON UP ø 1,0 600cc 96,83 W0SPG81AG13 GRAVITY SPRAY GUN + AKULON UP ø 1,3 600cc 96,83 W0SPG81AG15 GRAVITY SPRAY GUN + AKULON UP ø 1,5 600cc 96,83 W0SPG81AG18 GRAVITY SPRAY GUN + AKULON UP ø 1,8 600cc 96,83 W0SPG81AG20 GRAVITY SPRAY GUN + AKULON UP ø 2,0 600cc 96,83 W0SPG81AG25 GRAVITY SPRAY GUN + AKULON UP ø 2,5 600cc 96,83 W0SPG81AG28 GRAVITY SPRAY GUN + AKULON UP ø 2,8 600cc 96,83 W0SPG81AG30 GRAVITY SPRAY GUN + AKULON UP ø 3,0 600cc 96,83 W0SPG81AG35 GRAVITY SPRAY GUN + AKULON UP ø 3,5 600cc 96,83 AZ3 HTE2 P AV GRAVITY SPRAY GUN + 600cc PRESSURIZED AKULON UP &AIR FLOW ONTROL VALVE W0SPG82AG13 GRAVITY SPRAY GUN + PRESSURE AKULON UP ø 1,3 600cc 154,49 W0SPG82AG15 GRAVITY SPRAY GUN + PRESSURE AKULON UP ø 1,5 600cc 154,49 W0SPG82AG18 GRAVITY SPRAY GUN + PRESSURE AKULON UP ø 1,8 600cc 154,49 W0SPG82AG20 GRAVITY SPRAY GUN + PRESSURE AKULON UP ø 2,0 600cc 154,49 W0SPG82AG25 GRAVITY SPRAY GUN + PRESSURE AKULON UP ø 2,5 600cc 154,49 AIR AP SET W2AP80AG15 AIR AP SET ø 1,0; 1,3; 1,5 ref. part 1 27,11 W2AP80AG18 AIR AP SET ø 1,8; 2,0 ref. part 1 27,11 W2AP80AG25 AIR AP SET ø 2,5 ref. part 1 27,11 W2AP80AG30 AIR AP SET ø 2,8; 3,0 ref. part 1 27,11 W2AP80AG35 AIR AP SET ø 3,5 ref. part 1 27,11 FLUID NOZZLE + FLUID NEEDLE SET W FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,8 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 3,0 ref. part ,67 W FLUID NOZZLE + FLUID NEEDLE SET ø 3,5 ref. part ,67 SPARES W NOZZLE HOLDER ref. part 3 6, PATTERN ADJUSTMENT SET ref. part 5 30,62 W PATTERN ADJUSTMENT SET (only for AZ3 HTE) ref. part 5 8,47 W FLUID NEEDLE ADJUSTMENT KNOB ref. part 6 1,55 W FLUID NEEDLE GUIDE ref. part 7 2,10 W FLUID NEEDLE SPRING ref. part 8 0,28 W NEEDLE PAKING NUT ref. part 10 0,78 W AIR VALVE SET ref. part 11 7,41 W AIR VALVE SPRING ref. part ,09 W AIR VALVE ref. part ,41 W AIR VALVE SEAT ref. part ,04 W2OM4001 TRIGGER STUD ref. part 12 0,71 W2OM6051 TRIGGER ref. part 13 3,17 W TRIGGER (only for AZ3 HTE) ref. part 13 3, AIR ADJUSTMENT SET (HTE 2 AV - HTE 2 P AV) ref. part , PLUG (HTE 2 - HTE 2 HVLP) ref. part ,16 W THREADED BUSHING ref. part 15 1,73 W2OM5004 SREW (HTE 2 - HTE 2 AV - HTE 2 HVLP) ref. part ,14 W3OM5032 PRESSURE REGULATOR (HTE 2 P AV) ref. part ,07 W2OM6050 PLUG ref. part ,25 W2OM5000 AIR NIPPLE ref. part 17 2,62 W2KIT31 PAKING SET (3 pcs./1 pk.) ref. part 2,75 W AKULON UP SET ref. part 18 12,50 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 5,32 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13,71 W2KIT33 SLIDE RING KIT (10 pcs./1 pk.) ref. part D 9,26 W0UPAZ82 PRESSURIZED UP SET ref. part 19 45,69 W3OM1019 ANTIDROP DISK ref. part ,98 W3OM1020 UP + LID ref. part ,38 W3OM5031 STRAIGHT MALE ADAPTOR ref. part , AIR HOSE ref. part ,36 W2KIT32 LID PAKING SET (5 pcs./1 pk.) ref. part F 10,09 VPAAZ3H2 BLAK PLASTI ASE FOR AZ 3 HTE 2 (1 SPRAY GUN + 1 UP) 29,67 3

4 AZ30 HTE Manual Spray Gun Air Nipple: Fluid Nipple: Model G1/4 G1/4 AZ30 HTE HP AZ30 HTE HP AZ30 HTE HP AZ30 HTE HP AZ30 HTE HP Gravity spray gun Air flow control valve 25 ertifications 4

5 AZ30 HTE Manual Spray Gun M&S up 600 cc 600 cc Akulon cup The guns are supplied with the following cups: 3 complete M&S cups 1 complete AKULON cup USE: ode Description ref. AZ30 HTE GRAVITY SPRAY GUN + 600cc M&S UP & AIR FLOW ONTROL VALVE W0SPG33AG10 GRAVITY SPRAY GUN + M&S UP ø 1,0 600cc 117,50 W0SPG33AG13 GRAVITY SPRAY GUN + M&S UP ø 1,3 600cc 117,50 W0SPG33AG15 GRAVITY SPRAY GUN + M&S UP ø 1,5 600cc 117,50 W0SPG33AG18 GRAVITY SPRAY GUN + M&S UP ø 1,8 600cc 117,50 W0SPG33AG20 GRAVITY SPRAY GUN + M&S UP ø 2,0 600cc 117,50 AZ30 HTE GRAVITY SPRAY GUN + 600cc AKULON UP & AIR FLOW ONTROL VALVE W0SPG34AG10 GRAVITY SPRAY GUN + AKULON UP ø 1,0 600cc 117,50 W0SPG34AG13 GRAVITY SPRAY GUN + AKULON UP ø 1,3 600cc 117,50 W0SPG34AG15 GRAVITY SPRAY GUN + AKULON UP ø 1,5 600cc 117,50 W0SPG34AG18 GRAVITY SPRAY GUN + AKULON UP ø 1,8 600cc 117,50 W0SPG34AG20 GRAVITY SPRAY GUN + AKULON UP ø 2,0 600cc 117,50 AIR AP SET W2AP31AG15 AIR AP SET ø 1,0; 1,3; 1,5 ref. part 1 25,02 W2AP31AG18 AIR AP SET ø 1,8; 2,0 ref. part 1 25,02 FLUID NOZZLE + FLUID NEEDLE SET W2ADU10AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,36 W2ADU10AG13 FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,36 W2ADU10AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,36 W2ADU10AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,36 W2ADU10AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,36 SPARES W2OM3023 NOZZLE HOLDER ref. part 2 6,71 W2OM4001 TRIGGER STUD ref. part 4 0,71 W2PAT40AG PATTERN ADJ. ref. part 5 8,65 W2SUB2060 OMPLETE AIR VALVE ref. part 7 14,05 W2SUB2058 AIR VALVE SET ref. part 7-2 6,37 W2OM6001 AIR VALVE SPRING ref. part 7-3 0,25 W2OM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,38 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 6,31 W2OM3011 NEEDLE PAKING NUT ref. part 13 1,06 W2OM5004 SREW ref. part 14 0,14 W2OM6004 TRIGGER ref. part 15 3,24 W2OM3007 FLUID NEEDLE ADJ.KNOB ref. part 17 1,92 W2OM6002 NEEDLE SPRING ref. part 18 0,31 W2OM5014 THREADED BUSHING ref. part 19 1,65 W2SUB6024 AIR FLOW ONTROL VALVE ref. part 25 12,50 W2KIT12 PAKING SET ref. part 5,00 W2KIT28 AIR AP PAKING SET (5+5 pcs./1 pk.) ref. part D 6,43 W2KIT19 SPEIAL WRENH 69,85 W2KIT26 SREEN FILTER KIT for M&S up120 Mesh (5 pcs./1 pk.) 7,71 600cc AKULON GRAVITY UP W AKULON UP 600cc ref. part 20 12,50 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 5,32 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13,71 Disposable gravity Mix & Spray cup spares are available on page 14 5

6 AZ40 HTE AV Manual Spray Gun Air Nipple: Fluid Nipple: Model G1/4 G1/4 AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV Gravity spray gun Air flow control valve 25 ertifications 6 ERTIFIATE OF OMPLIANE We certify that we have tested the Air Gunsa AZ 40 HTE Spray Gun in accordance with pren Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: WATERBASED B/T 72,4% HS LAQUER (learcoat) 76,0% VHS PRIMER 93,2% Signed for MIRR THATHAM: Ken Roberts Research and Operations Director MOTOR INSURANE REPAIR RESEARH ENTRE olthrop Way, Thatcham, Berkshire, RG19 4NR UK

7 AZ40 HTE AV Manual Spray Gun cc Akulon cup USE: B E ode Description ref. AZ40 HTE AV GRAVITY SPRAY GUN + 600cc AKULON UP & AIR FLOW ONTROL VALVE W0SPG42AG08 GRAVITY SPRAY GUN + AKULON UP ø 0,8 600cc 94,65 W0SPG42AG10 GRAVITY SPRAY GUN + AKULON UP ø 1,0 600cc 94,65 W0SPG42AG12 GRAVITY SPRAY GUN + AKULON UP ø 1,2 600cc 94,65 W0SPG42AG15 GRAVITY SPRAY GUN + AKULON UP ø 1,5 600cc 94,65 W0SPG42AG18 GRAVITY SPRAY GUN + AKULON UP ø 1,8 600cc 94,65 W0SPG42AG20 GRAVITY SPRAY GUN + AKULON UP ø 2,0 600cc 94,65 AZ40 HTE AV GRAVITY SPRAY GUN + 200cc AKULON UP & AIR FLOW ONTROL VALVE W0SPG40AG08 GRAVITY SPRAY GUN + AKULON UP ø 0,8 200cc 94,65 W0SPG40AG10 GRAVITY SPRAY GUN + AKULON UP ø 1,0 200cc 94,65 W0SPG40AG12 GRAVITY SPRAY GUN + AKULON UP ø 1,2 200cc 94,65 W0SPG40AG15 GRAVITY SPRAY GUN + AKULON UP ø 1,5 200cc 94,65 W0SPG40AG18 GRAVITY SPRAY GUN + AKULON UP ø 1,8 200cc 94,65 W0SPG40AG20 GRAVITY SPRAY GUN + AKULON UP ø 2,0 200cc 94,65 AIR AP SET W2AP41AG12 AIR AP SET ø 0,8 ; 1,0 ; 1,2 ref. part 1 23,74 W2AP41AG15 AIR AP SET ø 1,5 ref. part 1 23,74 W2AP41AG18 AIR AP SET ø 1,8; 2,0 ref. part 1 23,74 FLUID NOZZLE + FLUID NEEDLE SET W2ADU40AG08 FLUID NOZZLE + FLUID NEEDLE SET ø 0,8 ref. part ,41 W2ADU40AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,41 W2ADU40AG12 FLUID NOZZLE + FLUID NEEDLE SET ø 1,2 ref. part ,41 W2ADU40AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,41 W2ADU40AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,41 W2ADU40AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,41 SPARES W4OM5003 THREADED BUSHING ref. part 3 1,66 W2OM4008 TRIGGER STUD ref. part 4 0,62 W2PAT40AG PATTERN ADJ. ref. part 5 8,65 W2SUB2060 OMPLETE AIR VALVE ref. part 7 14,05 W2SUB2058 AIR VALVE SET ref. part 7-2 6,37 W2OM6001 AIR VALVE SPRING ref. part 7-3 0,25 W2OM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,38 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 6,31 W2OM2006 NEEDLE PAKING ref. part 12 0,77 W2OM3011 NEEDLE PAKING NUT ref. part 13 1,06 W2OM5004 SREW ref. part 14 0,14 W2OM6005 TRIGGER ref. part 15 3,24 W2OM3007 FLUID NEEDLE ADJ. KNOB ref. part 17 1,92 W2OM6002 NEEDLE SPRING ref. part 18 0,31 W2OM5000 AIR NIPPLE (AZ40HTE) G1/4 M ref. part 20 2,62 W2SUB6024 AIR FLOW ONTROL VALVE (AZ40HTE AV) ref. part 25 12,50 W2KIT12 PAKING SET (AZ40HTE AV) ref. part 5,00 W2KIT08 SPEIAL WRENH 31,27 W2KIT26 SREEN FILTER KIT for M&S up 120 Mesh(5 pcs./1 pk.) 7, cc AKULON GRAVITY UP W0UPAZ cc AKULON UP ref. part 23 12,38 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 5,32 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13, cc AKULON GRAVITY UP W AKULON UP 600cc ref. part 23 12,50 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 5,32 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13,71 7

8 AZ10 HTE AV & AZ10 HTE SE Manual Spray Gun AZ10 HTE AV Air Nipple: Fluid Nipple: Model G1/4 G1/4 AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE Suction spray gun Air flow control valve AZ10 HTE SE 23 PL 10 B3 AZ10 HTE SE cup ertifications 8 ERTIFIATE OF OMPLIANE We certify that we have tested the Air Gunsa AZ 10 HTE Spray Gun in accordance with pren Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: WATERBASED B/T 79,8% HS LAQUER (learcoat) 76,4% VHS PRIMER 93,8% Signed for MIRR THATHAM: Ken Roberts Research and Operations Director MOTOR INSURANE REPAIR RESEARH ENTRE olthrop Way, Thatcham, Berkshire, RG19 4NR U.K.

9 AZ10 HTE AV & AZ10 HTE SE Manual Spray Gun 24 USE: AZ10 HTE SE Fluid Nipple ode Description ref. AZ10 HTE AV SUTION SPRAY GUN + 1 Lt. ALUMINIUM PIN LOK UP & AIR FLOW ONTROL VALVE W0SPG10AG10 SUTION SPRAY GUN ø 1,0 114,24 W0SPG10AG13 SUTION SPRAY GUN ø 1,3 114,24 W0SPG10AG15 SUTION SPRAY GUN ø 1,5 114,24 W0SPG10AG18 SUTION SPRAY GUN ø 1,8 114,24 W0SPG10AG20 SUTION SPRAY GUN ø 2,0 114,24 W0SPG10AG25 SUTION SPRAY GUN ø 2,5 114,24 W0SPG10AG30 SUTION SPRAY GUN ø 3,0 114,24 AZ10 HTE SE SUTION SPRAY GUN + 1 Lt. ALUMINIUM LEVER LOK UP & AIR FLOW ONTROL VALVE W0SPG12AG10 SUTION SPRAY GUN ø 1,0 154,49 W0SPG12AG13 SUTION SPRAY GUN ø 1,3 154,49 W0SPG12AG15 SUTION SPRAY GUN ø 1,5 154,49 W0SPG12AG18 SUTION SPRAY GUN ø 1,8 154,49 W0SPG12AG20 SUTION SPRAY GUN ø 2,0 154,49 W0SPG12AG25 SUTION SPRAY GUN ø 2,5 154,49 W0SPG12AG30 SUTION SPRAY GUN ø 3,0 154,49 AIR AP SET W2AP10AG15 AIR AP SET ø 1,0; 1,3; 1,5 ref. part 1 25,02 W2AP10AG18 AIR AP SET ø 1,8; 2,0; 2,5 ref. part 1 25,02 W2AP10AG30 AIR AP SET ø 3,0 ref. part 1 25,02 FLUID NOZZLE + FLUID NEEDLE SET W2ADU10AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,90 W2ADU10AG13 FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,90 W2ADU10AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,90 W2ADU10AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,90 W2ADU10AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,90 W2ADU10AG25 FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,90 W2ADU10AG30 FLUID NOZZLE + FLUID NEEDLE SET ø 3,0 ref. part ,90 SPARE W2OM3003 NOZZLE HOLDER ref. part 2 6,44 W2OM3011 NEEDLE PAKING NUT ref. part 4 1,06 W2OM4001 TRIGGER STUD ref. part 5 0,71 W2SUB2060 OMPLETE AIR VALVE ref. part 7 14,05 W2SUB2058 AIR VALVE SET ref. part 7-2 6,37 W2OM6001 AIR VALVE SPRING ref. part 7-3 0,25 W2OM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,38 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 6,31 W2PAT10AG PATTERN ADJ. ref. part 10 8,65 W2OM6002 NEEDLE SPRING ref. part 12 0,31 W2OM3007 FLUID NEEDLE ADJ. KNOB ref. part 13 1,92 W2OM6004 TRIGGER ref. part 17 3,24 W2OM5000 AIR NIPPLE G1/4 M AZ10 HTE ref. part 20 2,62 W2OM5008 FLUID NIPPLE G 1/4 AZ10 HTE SE ref. part 24 1,80 W2SUB6024 AIR FLOW ONTROL VALVE (AZ10 HTE AV/ AZ10 HTE SE)ref. part 25 12,50 W2KIT11 PAKING SET AZ 10 HTE ref. part 4,51 W2KIT10 PAKING SET AZ 10 HTE AV ref. part 5,79 W2KIT12 PAKING SET AZ10 HTE SE ref. part 5,00 W2KIT28 AIR AP PAKING SET (5+5 pcs./1 pk.) ref. part D 6,43 W2KIT04 SPEIAL WRENH 39,96 W2KIT01 PAINT FILTER SET (50 Mesh) (5 pcs./1 pk.) ref. part E 8,65 1 LITRE ALUMINIUM PIN LOK UP AZ10 HTE AV W0UPAZ10 OMPLETE UP SET ref. part 21 28,83 W2ASS1002 LID SET ref. part ,08 W2OM1000 ONTAINER 1 lt. ref. part ,59 W2OM5002 SUTION TUBE ref. part ,94 W2KIT09 LID PAKING KIT IN POLYETHYLENE (10 pcs./1 pk.) 31,75 1 LITRE ALUMINIUM LEVER LOK UP AZ10 HTE SE PL 10B 3 UP SET ref. part 23 49, ONTAINER ref. part , NON DRIP SET (2 pcs./1 pk.) ref. part , LID PAKING SET (2 pcs./1 pk.) ref. part , PAINT FILTER 130 Mesh 1,14 9

10 AZ10 HTE SP AV & AZ10 HTE P Manual Spray Gun AZ10 HTE SP AV Air flow control valve 25 AZ10 HTE SP AV Air Nipple: G1/4 M Fluid Nipple: G3/8 M AZ10 HTE P Air Nipple: Fluid Nipple: Model G1/4 M M16x1 F Pressure model AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV Pressure model with pressure cup included AZ10 HTE P ~400 AZ10 HTE P ~400 AZ10 HTE P ~400 AZ10 HTE P ~400 P 19 B up - AZ10 HTE P Pressure spray gun AZ10 HTE P ertifications AZ10 HTE P (body) 10 ERTIFIATE OF OMPLIANE We certify that we have tested the Air Gunsa AZ 10 HTE Spray Gun in accordance with pren Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: WATERBASED B/T 79,8% HS LAQUER (learcoat) 76,4% VHS PRIMER 93,8% Signed for MIRR THATHAM: Ken Roberts Research and Operations Director MOTOR INSURANE REPAIR RESEARH ENTRE olthrop Way, Thatcham, Berkshire, RG19 4NR U.K.

11 AZ10 HTE SP AV & AZ10 HTE P Manual Spray Gun USE: ode Description ref. AZ10 HTE SP AV PRESSURE SPRAY GUN + AIR FLOW ONTROL VALVE (G1/4-3/8 ) W0SPG16AG08 PRESSURE SPRAY GUN ø 0,8 G 1/4-3/8 99,00 W0SPG16AG10 PRESSURE SPRAY GUN ø 1,0 G 1/4-3/8 99,00 W0SPG16AG13 PRESSURE SPRAY GUN ø 1,3 G 1/4-3/8 99,00 W0SPG16AG15 PRESSURE SPRAY GUN ø 1,5 G 1/4-3/8 99,00 W0SPG16AG18 PRESSURE SPRAY GUN ø 1,8 G 1/4-3/8 99,00 W0SPG16AG20 PRESSURE SPRAY GUN ø 2,0 G 1/4-3/8 99,00 W0SPG16AG25 PRESSURE SPRAY GUN ø 2,5 G 1/4-3/8 99,00 AZ10 HTE P SPRAY GUN FOR PRESSURE UP P19B W0SPG13AG15S SPRAY GUN FOR PRESSURE UP P19B ø 1,5 133,82 W0SPG13AG18S SPRAY GUN FOR PRESSURE UP P19B ø 1,8 133,82 W0SPG13AG20S SPRAY GUN FOR PRESSURE UP P19B ø 2,0 133,82 W0SPG13AG25S SPRAY GUN FOR PRESSURE UP P19B ø 2,5 133,82 AZ10 HTE P SPRAY GUN WITH PRESSURE UP P19B W0SPG13AG15 SPRAY GUN WITH PRESSURE UP P19B ø 1,5 293,16 W0SPG13AG18 SPRAY GUN WITH PRESSURE UP P19B ø 1,8 293,16 W0SPG13AG20 SPRAY GUN WITH PRESSURE UP P19B ø 2,0 293,16 W0SPG13AG25 SPRAY GUN WITH PRESSURE UP P19B ø 2,5 293,16 AIR AP SET W2AP10AG15 AIR AP SET(also for AZ10 HTE SP W) ø 0.8; 1.0; 1.3; 1.5 ref. part 1 27,30 W2AP10AG18 AIR AP SET(also for AZ10 HTE SP W) ø 1,8; 2,0; 2,5 ref. part 1 27,30 W2SUB AIR AP SET(only for AZ10 HTE SP W) ø 2,5 ref. part 1 35,99 FLUID NOZZLE + FLUID NEEDLE SET W2ADU14AG08 FLUID NOZZLE + FLUID NEEDLE SET ø 0,8 ref. part ,74 W2ADU14AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,74 W2ADU14AG13 FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,74 W2ADU14AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,74 W2ADU14AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,74 W2ADU14AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,74 W2ADU14AG25 FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,74 FLUID NOZZLE + FLUID NEEDLE SET (only for AZ10 HTE SP W tungsten carbide version) W2ADU18AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,95 W2ADU18AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,95 W2ADU18AG25 FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,95 SPARES W2OM3003 NOZZLE HOLDER ref. part 2 6,44 W2OM2006 NEEDLE PAKING (AZ10 HTE SP AV /P) ref. part 3 0,77 W2OM3011 NEEDLE PAKING NUT ref. part 4 1,06 W2OM4001 TRIGGER STUD ref. part 5 0,71 W2SUB2060 OMPLETE AIR VALVE ref. part 7 14,05 W2SUB2058 AIR VALVE SET ref. part 7-2 6,37 W2OM6001 AIR VALVE SPRING ref. part 7-3 0,25 W2OM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,38 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 6,31 W2PAT10AG PATTERN ADJ. ref. part 10 8,65 W2OM6002 NEEDLE SPRING ref. part 12 0,31 W2OM3007 FLUID NEEDLE ADJ. KNOB ref. part 13 1,92 W2OM6004 TRIGGER ref. part 17 3,24 W2OM5000 AIR NIPPLE G1/4 M (AZ10 HTE SP W) ref. part 20 2,62 W2OM5008 FLUID NIPPLE G 1/4-3/8 (AZ10 HTE SP AV) ref. part 24 1,80 W2OM5013 FLUID NIPPLE G 1/4-1/4 (AZ10 HTE SP AV) ref. part 24 1,80 W2SUB6024 AIR FLOW ONTROL VALVE(AZ10 HTE SP AV - AZ10 HTE P - AZ10 HTE SP W) ref. part 25 12,50 W2KIT12 PAKING SET (AZ10 HTE SP AV - AZ10 HTE P) ref. part 5,00 W2KIT28 AIR AP PAKING SET (5+5 pcs./1 pk.) ref. part D 6,43 W2KIT18 SPEIAL NEEDLE PAKING SET Tungsten arbide (10 pcs./1 pk.)ref. part F 2,47 W2KIT04 SPEIAL WRENH 39,96 P 19B 1 Lt. PRESSURE UP PRESSURE UP G 3/8 (PF 3/8 )_ P 19B 1 litre 128, LID PAKING P 19B 15,38 11

12 AZ5 Manual Spray Gun Air Nipple: Fluid Nipple: Model G1/4 G1/8 AZ AZ AZ AZ Round pattern spray gun E Adapting nipple F ertifications A 200 cc Gravity up with non drip 12

13 AZ5 Manual Spray Gun USE: ode Description ref. AZ5 ROUND PATTERN SPRAY GUN + 70cc AKULON UP W ROUND PATTERN SPRAY GUN + AKULON UP ø 0,3 70cc 83,77 W ROUND PATTERN SPRAY GUN + AKULON UP ø 0,5 70cc 83,77 W ROUND PATTERN SPRAY GUN + AKULON UP ø 0,8 70cc 83,77 W ROUND PATTERN SPRAY GUN + AKULON UP ø 1,0 70cc 83,77 AZ5 ROUND PATTERN SPRAY GUN + 200cc AKULON UP W ROUND PATTERN SPRAY GUN + AKULON UP ø 0,3 200cc 90,30 W ROUND PATTERN SPRAY GUN + AKULON UP ø 0,5 200cc 90,30 W ROUND PATTERN SPRAY GUN + AKULON UP ø 0,8 200cc 90,30 W ROUND PATTERN SPRAY GUN + AKULON UP ø 1,0 200cc 90,30 AIR AP SET W AIR AP SET ø 0,3 ref. part 2 6,53 W AIR AP SET ø 0,5 ref. part 2 6,53 W AIR AP SET ø 0,8 ref. part 2 6,53 W AIR AP SET ø 1,0 ref. part 2 6,53 FLUID NOZZLE + FLUID NEEDLE SET W FLUID NOZZLE + FLUID NEEDLE SET ø 0,3 ref. part ,48 W FLUID NOZZLE + FLUID NEEDLE SET ø 0,5 ref. part ,48 W FLUID NOZZLE + FLUID NEEDLE SET ø 0,8 ref. part ,48 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,48 SPARES W AIR AP OVER ref. part 1 2,90 W2OM5004 SREW ref. part 4 0,14 W NEEDLE PAKING NUT ref. part 5 0,97 W PLUG ref. part 7 0,74 W FLUID NEEDLE GUIDE ref. part 8 1,91 W FLUID NEEDLE SPRING ref. part 10 0,09 W FLUID ADJ. KNOB ref. part 11 3,75 W AIR VALVE SET ref. part 12 7,52 W AIR VALVE SPRING ref. part ,08 W AIR VALVE ref. part ,11 W AIR VALVE SEAT SET ref. part ,22 W2OM4008 TRIGGER STUD ref. part 13 0,62 W TRIGGER ref. part 14 2,48 W AIR NIPPLE G1/4 M ref. part 16 1,20 W PAKING SET ref. part 3,28 AKULON GRAVITY UP 70 cc W GRAVITY UP 70 cc ref. part 17 6,85 AKULON GRAVITY UP 200 cc W GRAVITY UP 200 cc ref. part A 12,26 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part D 5,32 W ADAPTING NIPPLE ref. part E 2,69 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part F 13,71 13

14 MIX & SPRAY UP ode Models Disposable Gravity up A up+inner Lid+ Knob+ Filter (250 µ) (100 pcs.) 206, B up+inner Lid+ Knob+ Filter (125 µ) (100 pcs.) 206, up+inner Lid+ Knob+ Filter (250 µ+125 µ) (50+50 pcs.) 206, KM Disposable Kit 17,49 (3 M&S up + 1 Holder up M + 2 Filters 250 µ + 1 Filter 125µ) For: AZ30 HTE-AZ3 HTE 2-AZ40 HTE AV up Holder Kit (1 cup holder + 1 ring) G 1/4 M - For: AZ30 HTE-AZ3 HTE 2-AZ40 HTE AV 22, Paint Filter 250 µ (RED 60 Mesh) 0, Paint Filter Set 250 µ (RED 60 Mesh) (50 pcs.) 45, Paint Filter 125 µ (WHITE 120 Mesh) 0, Paint Filter Set 125 µ (WHITE 120 Mesh) (50 pcs.) 45,10 W2KIT21 Plug Set (50 pcs.) 4,52 W2KIT26 Screen Filter Set 125 µ (5 pcs./1 pk.) 7,71 W2KIT29 Screen Filter Set 125 µ (100 pcs.) 154, leaning Kit (Wash bottle set) (20 pcs.) 132,67 USE: Gun cases ode Description VPAAZ3H2 Single GUN PLASTI ASE for AZ3 HTE2 30, W4003 Multiple GUN PLASTI ASE 49,24 Built in Polypropilene / Dimensions 475 mm x 134 mm x 380 mm 14

15 AESSORIES ode Description Impact ontroller W IMPAT ONTROLLER 34,09 Swivel quick coupling Fig.1 VGRSWM SWIVEL QUIK OUPLING 1/4 M Fig. 1 10,20 VGRSWF SWIVEL QUIK OUPLING 1/4 F Fig. 1 10,20 Universal wrench W2KIT03 UNIVERSAL WRENH 3,61 Supports for gravity guns W ENTRAL GRAVITY GUN HOLDER (Three places) 42,30 W ENTRAL GRAVITY GUN HOLDER (Wall Mountable) 14,06 entral gravity 15

16 AZ PVA & AZ PVA TN Spray Gun for Body oating AZ PVA W AZ PVA with 1 Lt. aluminium pin lock cup 66,46 W AZ PVA TN 61,12 AZ PVA - AZ PVA TN SPARES AZ PVA AZ PVA TN ref. part 1 W EXTERNAL AIR AP SET X 2,99 ref. part 1 W OUTER NOZZLE X 7,19 ref. part 2 W JAM NUT X 1,25 ref. part 2 W MILLED NUT FOR OUTER NOZZLE X 1,71 ref. part 3 W HEAD ONNETION X 10,22 ref. part 3 W AIR AP SET X 3,37 ref. part 4 W FLUID NOZZLE X 6,73 ref. part 5 W SEAT VALVE X 6,54 ref. part 5-1 W VALVE X 2,41 ref. part 5-2 W AIR VALVE SEAT SET X 2,99 ref. part 5-3 W AIR VALVE X 0,46 ref. part 6 W SEAT VALVE X 6,54 ref. part 6-1 W VALVE X 2,41 ref. part 6-2 W AIR VALVE SEAT SET X 2,99 ref. part 6-3 W AIR VALVE X 0,46 ref. part 6 W2OM4008 TRIGGER STUD X 0,62 ref. part 7 W2OM4008 TRIGGER STUD X 0,62 ref. part 7 W TRIGGER X 2,99 ref. part 8 W TRIGGER X 2,99 ref. part 9 W KIT LID WITH HOSE X 24,01 ref. part 9-1 W LID X 18,79 ref. part 9-2 W SUTION HOSE X 5,03 ref. part 17 W AIR NIPPLE G1/4 M X X 1,20 ref. part W PAKING SET X 5,47 ref. part W PAKING SET X 2,74 1 LITRE ALUMINIUM PIN LOK UP ref. part 10 W0UPAZPVA OMPLETE UP SET X 30,13 ref. part 10-1 W2ASS1010 LID SET X 20,26 ref. part 10-2 W2OM5015 SUTION HOSE X 4,61 ref. part 10-3 W2OM1000 ONTAINER 1 lt. X 10,59 AZ PVA TN Ref. ode Description Garage equipment AZ PVA AZ PVA TN 16

17 P6/PL6 Spray Gun for Oil, Petroleum & Detergents AE7 Sprayer for Mixed Air & Water P6/PL6 3 AE Garage equipment P6/PL6 AE ode Description ref. W P6 with 1 Lt. aluminium cup and 260 mm extension tube 54,94 W PL6 with 1 Lt. aluminium cup and 500 mm extension tube 59,84 W AE7 100,64 P6/PL6 SPARES W OUTER TUBE SET 260 mm ref. part 1 13,51 W OUTER TUBE SET 500 mm ref. part 1 18,43 W NOZZLE ref. part 1-1 3,46 W TUBE 260 mm ref. part ,04 W TUBE 500 mm ref. part ,53 W AIR AP SET ref. part 2 1,64 W INNER TUBE 260 mm ref. part 3 8,36 W INNER TUBE 500 mm ref. part 3 10,44 W SEAT VALVE ref. part 5 6,54 W VALVE ref. part 5-1 2,41 W AIR VALVE SEAT SET ref. part 5-2 2,99 W AIR VALVE ref. part 5-3 0,46 W2OM4008 TRIGGER STUD ref. part 6 0,62 W TRIGGER ref. part 7 2,99 W PAKING SET ref. part 4,72 W AIR NIPPLE G1/4 M ref. part 17 1,20 W0UPAZ10 OMPLETE UP SET ref. part 9 28,83 W2ASS1002 LID SET ref. part 10 18,08 W2OM5002 SUTION TUBE ref. part ,94 W2OM1000 ONTAINER 1 lt. ref. part 11 10,59 W2KIT09 LID PAKING KIT IN POLYETHYLENE (10 pcs./1 pk.) 31,75 AE7 SPARES W NOZZLE OUTER 210 mm ref. part 1 17,64 W FLUID NOZZLE ref. part 2 1,92 W NOZZLE ONNETION ref. part 3 4,04 W SEAT VALVE ref. part 5 6,54 W VALVE ref. part 5-1 2,41 W AIR VALVE SEAT SET ref. part 5-2 2,99 W AIR VALVE ref. part 5-3 0,46 W2OM4008 TRIGGER STUD ref. part 6 0,62 W TRIGGER ref. part 7 2,99 W AIR NIPPLE ref. part 9 2,90 W DRAIN VALVE ref. part 10 38,53 W ONNETION PLATE ref. part 11 2,14 W HEXAGON NUT ref. part 12 1,36 W ONNETION HOSE ref. part 13 2,69 W AIR NIPPLE G1/4 M ref. part 17 1,20 W PAKING SET ref. part 2,

18 GI10TDP/TLS Tyre Inflating Equipment INFLATION HEADS TLS 1 TDP GI10TDP/TLS INFLATION HEADS TDP 7 TDPS 5 TDPR 6 TLS Only for hose ø 6 mm Only for Gl 10 TDP ode Description ref. W GI10TDP Tyre inflating equipment 99,55 W GI10TLS Tyre inflating equipment 82,47 W TDPS Inflation Head ref. 1 27,88 W TDP Inflation Head ref. 2 34,51 W TDPR Inflation Head ref. 7 32,53 W TDPG Inflation Head ref. 8 32,53 W TLS Inflation Head ref. 5 10,09 GL10TDP - GL10TLS SPARES W HOSE TLS ref. part 1 TLS 11,47 W HOSE TDP ref. part 1 TDP 41,40 W PAKING ref. part 1-1 0,64 W VALVE ref. part 1-2 1,36 W PROTETION RUBBER ref. part 2 3,83 W PRESSURE GAUGE ref. part 3 33,68 W SREW ref. part 4 2,03 W PLUG ref. part 5 1,83 W VALVE ref. part 6 2,03 W DRAIN VALVE SET ref. part 8 6,73 W DRAIN VALVE ref. part 8-1 2,69 W VALVE ref. part 8-2 2,52 W AIR VALVE ref. part 9 1,64 W NEEDLE GUIDE ref. part 10 2,99 W TRIGGER ref. part 11 2,90 W TRIGGER STUD ref. part 12 1,25 W PAKING SET ref. part 4,09 INFLATION HEADS SPARES W VALVE TDP ref. part 3 1,20 W PAKING VALVE TDP ref. part 4 0,64 W PAKING ref. part 6 1,01 W VALVE ref. part 9 1,36 Garage equipment 18

19 S8 & SP8 Blowing Gun Garage equipment 1A (S8) 1B - 1(SP8) 1B 1B ode Description ref. W S8 Blowing gun 27,00 W S8 Blowing gun with quick coupling 1/4 27,00 W SP8 Blowing gun with nozzle extension 240 mm 31,01 W SP8 Blowing gun with nozzle extension 240 mm & quick coupling 1/4 31,01 S8/SP8 SPARES W NOZZLE S8 ref. part 1 A 3,37 W KIT OUTER HOSE 240 mm SP8 ref. part 1 B 12,51 W OUTER HOSE SP8 ref. part 1 B-1 2,90 W HOSE 240 mm SP8 ref. part 1 B-2 9,67 W SEAT VALVE ref. part 4 6,54 W VALVE ref. part 4-1 2,41 W AIR VALVE SEAT SET ref. part 4-2 2,99 W AIR VALVE ref. part 4-3 0,46 W2OM4008 TRIGGER STUD ref. part 5 0,62 W TRIGGER ref. part 6 2,99 W PAKING SET ref. part 2,63 W AIR NIPPLE G1/4 M ref. part 17 1,20 19

20 ST/ST1 & ST1S Sandblasting Gun ST B Ref. ode Description W ST Sandblasting gun ø 5.0 mm - sand suction hose 1,5 m 69,63 W ST Sandblasting gun ø 6.0 mm - sand suction hose 1,5 m 69,63 W ST1 Sandblasting gun with 1 Lt. cup 59,84 W ST1S Sandblasting gun with sand suction hose 3 m 60, ST1/ST1 S ST - ST1 SPARES ST ST1 ST1S ref. part 1 W NOZZLE KIT ø 5 mm X 21,76 ref. part 1 W NOZZLE KIT ø 6 mm X 21,76 ref. part 1 W NOZZLE X X 19,16 ref. part 1-1 W ONNETION AIR AP X 9,67 ref. part 1-2 W HARDENED STEEL OUTER NOZZLE ø 5 mm X 19,80 ref. part 1-2 W HARDENED STEEL OUTER NOZZLE ø 6 mm X 19,80 ref. part 1-3 W STAINLESS STEEL INNER NOZZLE X 3,94 ref. part 2 W JAM NUT X X 1,64 ref. part 3 W AIR AP SET X X 3,37 ref. part 4 W SEAT VALVE X 6,54 ref. part 4-1 W VALVE X 2,41 ref. part 4-2 W AIR VALVE SEAT SET X 2,99 ref. part 4-3 W AIR VALVE X 0,46 ref. part 5 W2OM4008 TRIGGER STUD X 0,62 ref. part 6 W TRIGGER X 2,99 ref. part 6 W SEAT VALVE X X 6,54 ref. part 6-1 W VALVE X X 2,41 ref. part 6-2 W AIR VALVE SEAT SET X X 2,99 ref. part 6-3 W AIR VALVE X X 0,46 ref. part 7 W SUTION HOSE SET X 30,75 ref. part 7 W2OM4008 TRIGGER STUD X X 0,62 ref. part 8 W TRIGGER X X 2,99 ref. part 17 W AIR NIPPLE G1/4 M X X X 1,20 ref. part W PAKING SET X 2,90 ref. part W PAKING SET X 4,72 ref. part W PAKING SET X 2,74 ref. part M W SUTION HOSE X 22,46 1 LITRE ALUMINIUM PIN LOK UP ST1 ref. part 9 W0UPAZ10 OMPLETE UP SET X X 28,83 ref. part 10 W2ASS1002 LID SET X X 18,08 ref. part 10-1 W2OM5002 SUTION TUBE X X 2,94 ref. part 11 W2OM1000 ONTAINER 1 lt. X X 10,59 W2KIT09 LID PAKING KIT IN POLYETHYLENE (10 pcs./1 pk.) X X 31,75 M ST ST1 Garage Equipment 20

21 AZ40 HTE SP & AZ40 HTE SP AV Spares SUPERSEDED - SUPERSEDED - SUPERSEDED Air Nipple: Fluid Nipple: Model G1/4 G1/4 AZ40 HTE SP AZ40 HTE SP AZ40 HTE SP AZ40 HTE SP AZ40 HTE SP AZ40 HTE SP ode Description ref. SPARES W2AP41AG12 AIR AP SET ø 0,8 ; 1,0 ; 1,2 ref. part 1 23,74 W2AP41AG15 AIR AP SET ø 1,5 ref. part 1 23,74 W2AP41AG18 AIR AP SET ø 1,8; 2,0 ref. part 1 23,74 W2ADU44AG08 FLUID NOZZLE + FLUID NEEDLE SET ø 0,8 ref. part ,49 W2ADU44AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,49 W2ADU44AG12 FLUID NOZZLE + FLUID NEEDLE SET ø 1,2 ref. part ,49 W2ADU44AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,49 W2ADU44AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,49 W2ADU44AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,49 W2OM4008 TRIGGER STUD ref. part 4 0,62 W2PAT40AG PATTERN ADJ. ref. part 5 8,65 W2SUB2060 OMPLETE AIR VALVE ref. part 7 14,05 W2SUB2058 AIR VALVE SET ref. part 7-2 6,37 W2OM6001 AIR VALVE SPRING ref. part 7-3 0,25 W2OM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,38 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 6,31 W2OM2006 NEEDLE PAKING ref. part 12 0,77 W2OM3011 NEEDLE PAKING NUT ref. part 13 1,06 W2OM5004 SREW ref. part 14 0,14 W2OM6005 TRIGGER ref. part 15 3,24 W2OM3007 FLUID NEEDLE ADJ. KNOB ref. part 17 1,92 W2OM6002 NEEDLE SPRING ref. part 18 0,31 W2OM5000 AIR NIPPLE AZ40 HTE SP G1/4 M ref. part 20 2,62 W2OM5013 FLUID NIPPLE G1/4 M ref. part 23 1,80 W2SUB6024 AIR FLOW ONTROL VALVE AZ40 HTE SP AV ref. part 25 12,50 W2KIT12 PAKING SET AZ40 HTE SP AV ref. part 5,00 W2KIT08 SPEIAL WRENH 31,

22 TRADING TERMS All orders are accepted in accordance with and subject to Anest Iwata (UK) Limited Standard onditions of Business (Home and Export), copies of which are available on request. Where these onditions of Business conflict with customers' onditions of Purchase the Anest Iwata onditions of Business shall prevail unless any express change has been previously agreed, in writing, by Anest Iwata (UK) Limited. MINIMUM ORDER HARGES net for credit card transactions. PAKING AND ARRIAGE HARGES 1. U.K. Mainland (excluding Scottish Highlands) a) Orders value and less than 30 kg weight will be despatched on our normal 3 working days carrier service. This excludes products such as infra-red, gun washmachines, distillers, can crushers and paper balers which are palletised goods for delivery. b) arriage will be charged on all other orders as follows: Orders sent in Jiffy Bag (Small items at customers own risk) 4.35 Goods order value up to net and less than 30 kg Weight will be despatched on a 3 working day courier service 9.99 Goods over and less than 30kg arriage Paid Next Day before 12:30 p.m Next Day before 10:30 a.m Saturday a.m An additional charge of 45p per kilo for weights exceeding the figures, shown will apply. Pallet (over 30kg) 3 working day delivery per pallet Republic of Ireland Order value up to net and less than 30kg N.B. Delivery times are estimates only and the ompany shall not be liable for any delay in delivery c) Postal deliveries except for small items are not available due to size and nature of product and new postal practises. 2. U.K. Offshore, N. Ireland, Scottish Highlands and Export - carriage will be invoiced at cost prevailing at the time of despatch. 3. All products and spares are sold with a back to base warranty. A limited warranty may apply to some items. For full details of all Terms and onditions, including warranty conditions, contact our sales office ( ) 4. Any claim for shortages or damage will not be considered unless reported by telephone on day of delivery and confirmed in writing within 7 days of delivery, or in the case of non delivery reported in writing within 21 days from date of despatch (as notified to the customer on invoices). Proof of delivery can only be supplied if requested, in writing, within 30 days from date of invoice: otherwise delivery will be deemed to have been made. In the case of delivery outside of the U.K mainland the time limits for reporting defective or non-delivery are 14 days and 30 days respectively and must be reported to the carrier too. RETURNS POLIY 1. Goods correctly supplied to customers' orders are not accepted for return. 2. In the event that we agree to the return of standard products, a returns note number will be issued and must be clearly shown on the outside of the packaging. A re-stocking charge of 35% will be deducted from any credit note due. 3. Special products produced to the customer's specification are not accepted for return. 4. A returns note number must be obtained before any goods are returned for service or repair and must be clearly shown on the outside of the packaging ( ) 5. Goods returned without a returns note number issued by ANEST IWATA will not be accepted into our distribution centre without prior notice given. Unidentified goods sent by post will be returned and charged accordingly to sender. SERVIE WORK 1. A returns note number must be obtained before any goods are returned for service or repair and must be clearly shown on the outside of the packaging. 2. A minimum 15 estimate charge will apply to all equipment sent back for service. NOTES 1. Prices, descriptions and specifications are correct at February 2009 and are subject to change without notice. 2. All prices in the Price List exclude V.A.T. 3. Errors and Omissions Excepted. SALES ORDER OFFIE 1. We do not accept responsibility for orders incorrectly supplied when placed with us by telephone. Written purchase orders placed by post, fax or will ensure correct goods to be supplied. 22

23 OMMENTS 23

24 24 OMMENTS