2016 Lion Brand Yarn Company, all rights reserved.

Transcription

1 Free Weaving Pattern Martha Stewart Crafts TM/MC -Lion Brand Yarn DIY Weaver TM Starter Kit-Martha Stewart Crafts TM/MC -Lion Brand Yarn DIY Weaver Extender TM -Lion Brand Wool-Ease Thick & Quick Vanna s Choice Designed by Sarah Zee 2016 Lion Brand Yarn Company, all rights reserved.

2 SKILL LEVEL - Beginner SIZE BAG Finished Size About 9 1/2 x 11 in. (24 x 28 cm), after folding and seaming. DEVICE CASE Finished Size About 5 x 8 in. (12.5 x 20.5 cm), after folding and seaming. MATERIALS Lion Brand Wool-Ease Thick & Quick (Art. #640) 154 Grey Marble 1 ball (A) 099 Fisherman 1 ball (B) 149 Charcoal 1 ball (C) 135 Spice 1 ball (D) or colors of your choice Lion Brand Vanna s Choice (Art. #860) 130 Honey 1 ball (E) or color of your choice Martha Stewart Crafts TM/MC Lion Brand Yarn DIY Weaver TM Starter Kit Martha Stewart Crafts TM/MC Lion Brand Yarn DIY Weaver Extender TM Kit ADDITIONAL MATERIALS One decorative button about 2 1/2 in. (6.5 cm) long for Bag and 2 buttons about 3/4 in. (2 cm) diameter for Case. About 6 in. (15 cm) of leather lacing for Case Sewing needle and thread NOTES 1. Bag and Device Case are meant to inspire your creativity! Follow the row by row instructions, though you needn t follow the pattern exactly. 2. Bag is worked in one piece, then folded and seamed. 3. Device Case is worked lengthwise across the loom bases, then folded and seamed. 4. To change yarn color, cut the old color leaving a long yarn tail. Begin weaving with the new color leaving a long yarn tail. These tails will be woven in later.

3 BAG Loom Set-Up Following DIY Weaver Extender TM kit manual instructions, connect loom base from starter kit to loom base from extender kit. Insert 28 standard pegs along bottom and top rows of loom bases 56 pegs placed for warp. Warp Following manual instructions for Warping set up the warp across 56 pegs with A. Weft Following manual instructions for Basic Weaving, work as follows: 5 rows with B 10 rows with A 4 rows with D Following manual instructions for 2 x 2 Weaving, work 2 rows with D. Following manual instructions for Basic Weaving, work as follows: 4 rows with D 6 rows with C 4 rows with 2 strands of E 4 rows with B Following manual instructions for 2 x 2 Weaving, work as follows: 2 rows with B 2 rows with 2 strands of E 2 rows with A Following manual instructions Basic Weaving, work 4 rows with A. Following manual instructions for 2 x 2 Weaving, work as follows: 1 row with C 2 rows with A Following manual instructions for Basic Weaving, work as follows: 3 rows with A

4 3 rows with B Following manual instructions for 2 x 2 Weaving, work as follows: 1 row with B 1 row with D Repeat last 2 rows 5 more times Continue in 2 x 2 Weaving and work 1 row with B 1 row with A 1 row with D Repeat last 2 rows 5 more times, then work 7 rows with A Following manual instructions for Basic Weaving, work 6 rows with B. Following video instructions for Satin Weaving, work 11 rows with 2 strands of E. Following manual instructions for Basic Weaving, work 2 rows with C. Following manual instructions for Basic Weaving, work the remainder of the warp with B. FINISHING Remove Weaving From Loom Carefully lift all the loops up and off the pegs. Fold Bag in half and whipstitch sides together with 1 strand of A. Strap Cut 3 strands, each about 3 yds (3 m) long, each of 3 different yarns total of 9 strands. Knot strands together about 5 1/2 in. (14 cm) from one end. Divide strands into 3 groups of 3 strands each, then braid for desired length for strap. Knot strands together at end of braid. With sewing needle and thread, sew to each side of bag, over whipstitches. Trim yarn at each end of braid. With sewing needle and thread, sew button to center front of Bag. Cut a 10 in. (25.5 cm) length of C for button loop. Fold length in half and make a knot 2 in. (5 cm) from fold. Sew button loop on inside back of Bag, opposite button. TASSELS (make 4) Following video instructions for tassels, make tassels in desired length with colors as desired.

5 Tie 2 tassels to each bottom corner of Bag. Weave in yarn ends. DEVICE CASE Loom Set-Up Following DIY Weaver Extender TM kit manual instructions, connect loom base from starter kit to loom base from extender kit. Following diagram, insert 112 pegs into loom base for warp. Warp Following manual instructions for Warping set up the warp across 56 pegs with A. Weft Following manual instructions for Basic Weaving, work 2 rows with 2 strands of E. Following video instructions for Satin Weaving, work as follows: 12 rows with 2 strands of E 5 rows with 1 strand of A 5 rows with 1 strand of C 3 rows with 1 strand of B Following manual instructions for Basic Weaving, work the remainder of the warp with 1 strand of B. FINISHING Remove Weaving From Loom Carefully lift all the loops up and off the pegs. Fold Case leaving a 3 1/2 in. (9 cm) long flap and whipstitch sides together. Sew one button at center front of flap and one button on front of Case, just below flap. Wrap leather lacing around buttons to close Case. Weave in yarn ends. Every effort has been made to produce accurate and complete instructions. We cannot be responsible for variance of individual knitters or crocheters, human error, or typographical mistakes.

6