Cuddles the Hexi-Turtle

Transcription

1 Cuddles the Hexi-Turtle Created by: Kelley McKenzie, Freelance Educational Coordinator Quilts are not the only thing that showcase hexagonal cuts! Bring some stylish fun into your child s play area with this comfy statement piece. Clear, easy to understand directions will help you with piecing the hexagonal top, appliquéing the turtle face and sewing it all together. You ll have so much fun making this and the children in your life will enjoy it for years to come. Skill level: Confident beginner Time: 4-6 hours Janome Supplies Required: Skyline S9 1/4 Seam foot O Dual Feed foot AD Open Toe Satin Stitch foot F2 Zipper foot E Quilting Bar Fabric/Notions Required: 1 1/4 yds. for center of turtle, head and feet 1/8 yd. for 1st inner color 1/8 yd. for 2nd color and eyes 1/4 yd. for 3rd color 1/3 yd. for 4th color 2/3 yd. for 5th color 1 1/4 yds. backing All-purpose sewing thread 1/8 yd. fusible webbing for eyes 22 Invisible zipper 2 1/2 yds. fusible fleece 3-32oz. bags polyfil Attached templates Paper scissors Chalk pen Rotary cutter/mat/ruler Safety or straight pins WHAT S NEXT Page 1

2 Cuddles the Hexi-Turtle Cutting Instructions: 1. Cut out the attached templates. 5. Sew the two halves of the turtle shell together. 2. Using the newly cut patterns, place on fabric and cut out shapes. Follow templates guidelines for fold placement and number of each piece to be cut. 3. For turtle shell cut the following 1st and 2nd color 2 inch strips (2 strips each) 3rd color 3 inch strips (3 strips) 4th color 4 inch strips (3 strips) 5th color 5 inch strips (4 strips) Sewing Instructions: 1. Attach 1/4 Seam foot O. Thread machine with coordinating sewing thread in top and bobbin. 2. Start by sewing the first color strip to the two shorts sides of the center hexi fabric and then the outside. 6. Place the pieced turtle shell on top of the backing fabric and using a straight edge ruler and chalk pen, trace the outside edges of shell onto the backing. Cut out backing. 7. Repeat the above steps to trace and cut the bottom (belly) of the turtle and backing fabric. 8. Iron the fusible fleece to the backside of the turtle shell and the turtle bottom. 9. Layer the pieced turtle shell with the backing fabric. Pin in place. 10. Attach Dual Feed foot AD. 11. Select Sewing Applications > Quilting> Straight Stitch. The machine will automatically length the stitch to Using the Stitch in the Ditch method, sew the turtle shell. 13. Layer the bottom fabric with the backing fabric. 14. Using a straight edge ruler and chalk pen, draw a diagonal line from the top left corner to the bottom right corner. 4. Repeat the above step with the remaining strips in the correct order, building both halves of the hexagon as you go. WHAT S NEXT Page 2

3 Cuddles the Hexi-Turtle 15. Sew a straight line on the chalk line. 16. Attach the Quilting Bar to the Dual feed foot and place it at the 2 mark on the sewing bed. 17. Line up the bar with the last line you just quilted and sew the next line. 23. Select Sewing Applications > Appliqué. Select Applique M. 18. Continue until you have quilted all the way across the fabric, on both sides of the original chalk marking. 19. Repeat steps 14, 17 and 18 in order to sew in the opposite direction to create cross hatch quilting. 24. With Auto Foot Lift activated, slowly sew around eye fabric, appliquéing them in place. 20. Fuse fabric for the eyes to a piece of fusible webbing. Place the eye template pattern on the fabric and cut out both eyes. 21. Remove the paper backing of the fusible web and fuse the eyes to the turtle head. 22. Attach Open Toe Satin Stitch foot F Select two of each foot fabric and place right sides together. 26. Attach 1/4 Seam foot O. Using a 1/4 seam, sew around all sides leaving the straight part open. Repeat for remaining three feet and head. 27. Stuff the head and feet and enclose the opening. WHAT S NEXT Page 3

4 Cuddles the Hexi-Turtle 28. Refer to the attached image to see how to pin the head and feet to the right side of the shell. 31. Attach Zipper foot E. Sew the zipper in place on the newly cut lines of the turtle bottom. 29. On the turtle belly fabric, use a straight edge ruler and measure 7 down from the top. Using a rotary cutter, cut a straight line. 32. Open the zipper all the way and pin right side of the bottom to the right side of the turtle shell with all turtle body parts in between, facing inward. 33. Attach Dual Feed foot AD. 34. Sew a 1/2 seam all the way around the entire shell. 35. Pull the turtle through the open zipper. 36. Stuff Cuddles the Hexi-Turtle and enjoy! 30. Select Sewing Applications> Zipper > Invisible Zipper. WHAT S NEXT Page 4

5 Shell Center: Cut 2

6 Head: Cut 2 on fold

7 Legs: Cut 8 Eye: Cut 2

8 Tail: Cut 2