INSULATED TOOLS 1000 V

Transcription

1 FETURES OF INSUTE TOOS insulated extension bar /" 90.4 VE insulated reversible ratchet /" 90. VE insulated single offset ring wrench VE insulated single open end wrench 0 VE insulated socket /" 90 VE 6 combination pliers VE I 406 VE I 6 linemen`s pliers VE I 40 VE I 6 long flat nose pliers VE I 47 VE I 6 wire stripping pliers VE I 478 VE I 7 diagonal cutting nippers VE I 46 VE I 7 heavy duty diagonal cutting nippers VE I 466 VE I 7 long nose pliers with side cutter VE I 06 VE I 7 long round nose pliers VE I 476 VE I 8 cable shears VE I VE I 8 long nose pliers with side cutter and pipe grip straight VE I 08 VE I 8 long nose pliers with side cutter and pipe grip, bent VE I VE I 8 set of VE I pliers on carton display 400/7 VE 9 combination pliers VE 406 VE 9 insulated waterpump box joint pliers 447/ VE I 9 long flat nose pliers VE 47 VE 0 diagonal cutting nippers VE 46 VE 0 heavy duty diagonal cutting nippers VE 466 VE 0 long round nose pliers VE 476 VE long nose pliers with side cutter and pipe grip straight VE 08 VE long nose pliers with side cutter and pipe grip, bent VE VE long nose pliers with side cutter VE 06 VE cable shears VE VE linemen`s pliers VE 40 VE wire stripping pliers VE 478 VE crosstp (PH) srewdriver with insulated blade,ve I 6 VE I crosstp (PZ) srewdriver with insulated blade,ve I 6 VE I electrician 's screwdriver, VE I 60 VE I set of screwdrivers VE I 60 S6 VE I set of screwdrivers VE I 60 S6T VE I 4 crosstp (PH) srewdriver with insulated blade,ve 6 VE 4 crosstp (PZ) srewdriver with insulated blade,ve 6 VE 4 electrician's screwdrivers, VE 60 VE 4 set of screwdrivers VE 60 S6T VE 4 set of screwdrivers VE 60 S6 VE set of screwdrivers VE I on display stand 60 S0 VE I set of screwdrivers VE on display stand 60 S0 VE

2 P I E R S -VE I INE * MTERI: SPEI OMPOSITION STEE SUITE FOR HRENING N TEMPERING * ENTIREY HRENE N TEMPERE * UTTING EGES INUTION HRENE * HE POISHE * SURFE FINISH: ROME PTE * HEVY UTY OUE - OMPONENT HNES *JET STMP UNIOR Hand tools for live working up to 000 V.. and 00 V.. The VE hand tools is in accordance to European standard EN genda:. alternating current.. direct current -VE INE * MTERI: SPEI OMPOSITION STEE SUITE FOR HRENING N TEMPERING * ENTIREY HRENE N TEMPERE * UTTING EGES INUTION HRENE * HE POISHE * SURFE FINISH: ROME PTE * HEVY UTY PSTI HNES Every insulated hand tools is tested individual on the end of production process. -WRENHES * material: chrome vanadium * jaws: chrome plated Safety recommendation: If the insulating material on insulated tools shows damage (exfoliations, cracks) you have never use them for working on live components. -SREWRIVERS * blade: chrome molybdenum vanadium, phosphatized * handle: double-component material * blade: chrome molybdenum vanadium, phosphatized * handle: polypropylene IMENSIONS RE IN mm, WEIGHTS RE IN g.

3 SFETY OK SYSTEM The socket will be released from ratchet with by simply pressing the button. Fit with our sockets 90 VE /. Hanging hole With 6 teeth 0% higher torque upon IN standard minimal angle of turn 0 Important inside parts of mechanism are metal. Mechanical characteristics according with IN 7449 likes by our existence ratchet 90. I uttons for changing the screwing directions HIGHER SEURITY N USER OMFORT omfort to the end user and perfect adaptability to the handle is assured by a heavy duty double component handle. STMP TEST The indenter is loaded with a weight of 0N and is applied to the centre of the handle. The test is successful if the test piece subsequently passes the electrical test. INSUTION TEST efore testing the test piece is heated to 70 -/+ for 68 hours. The hanger is loaded with weights (00 N) The duration of test is minutes. The test piece is acceptable if the handle remains firmly attached to the conducting part. IMPT TEST The test is carried out at an ambient temperature of The hammer is allowed to fall freely on the test piece times. The test piece is acceptable if the handle is not cracked, broken or does not show signs of flaking. FME RETRNY TEST The flame is applied to the test piece for 0 seconds. The test piece is acceptable if the height of the flame on the burning handle does not exceed 0 mm in an observation period of 0 seconds after the burner has been removed. EETRI TEST (0kV) efore testing the tools are immersed in a bath of water at for 4 hours +- hours. The test pieces are acceptable if there is no electrical discharge, spark over or flashover, and if the current leakage is less than m for 0 mm insulation. 4 4

4 90.4 VE VE 90. VE 90 VE 0 VE VE INSUTE SINGE OFFSET RING WRENH 0 VE * MTERI : HROME VNIUM * 00 % ONTRO - EVERY PEE IS TESTE INSUTE SINGE OPEN EN WRENH , 4, 7, , , 8, , VE * MTERI : HROME VNIUM * 00 % ONTRO - EVERY PEE IS TESTE INSUTE SOKET / T , , 6,, , 6,, , 6,, , 6,, , , , , T * MTERI: HROME VNIUM * 00 % ONTRO - EVERY PEE IS TESTE , , ,, , , , ,, , , 7, , VE * MTERI: HROME VNIUM * 00 % ONTRO - EVERY PEE IS TESTE INSUTE REVERSIE RTHET / VE * MTERI: HROME VNIUM * 00 % ONTRO - EVERY PEE IS TESTE INSUTE EXTENSION R /

5 406 VE I 40 VE I 47 VE I 478 VE I 406 VE I OMINTION PIERS soft wire usn6 (ISO47) medium hard wire N/mm 0 N/mm 40 VE I INEMEN`S PIERS soft wire usn6 (ISO47) medium hard wire N/mm 0 N/mm 478 VE I WIRE STRIPPING PIERS 47 VE I ONG FT NOSE PIERS mm

6 46 VE I 476 VE I 466 VE I 06 VE I 46 VE I IGON UTTING NIPPERS medium hard wire soft wire u - ETP (ISO7) 0-0 N/mm 0 N/mm O/ 0, mm O/ 0, mm 476 VE I ONG ROUN NOSE PIERS , , 0 49, VE I HEVY UTY IGON UTTING NIPPERS 06 VE I ONG NOSE PIERS WITH SIE UTTER E soft wire usn6 (ISO47) N/mm hard wire 0 N/mm O/,8 mm O/ mm E soft wire usn6 (ISO47) medium hard wire N/mm 0 N/mm 7 7

7 08 VE I VE I VE I 08 VE I ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, STRIGHT E 400/7 E soft wire usn6 (ISO47) medium hard wire N/mm 0 N/mm /7 SET OF VE I PIERS ON RTON SET/pcs ONTENTS: VE I ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, ENT E rt. 406 VE I 46 VE I 478 VE I 08 VE I imension VE I E SHERS Pcs E medium hard wire soft wire usn6 (ISO47) N/mm 0 N/mm * FOR UTTING THE E WITHOUT STEE WIRE Ø

8 447/VE I 406 VE 47 VE 447/ VE I INSUTE WTERPUMP OX JOINT PIERS 406 VE OMINTION PIERS VE ONG FT NOSE PIERS * long flat jaws * gripping surface serrated soft wire usn6 (ISO47) medium hard wire N/mm 0 N/mm 9 9

9 476 VE 46 VE 466 VE 46 VE IGON UTTING NIPPERS 466 VE HEVY UTY IGON UTTING NIPPERS medium hard wire soft wire u - ETP (ISO7) 0-0 N/mm 0 N/mm O/ 0, mm O/ 0, mm soft wire usn6 (ISO47) hard wire N/mm 0 N/mm O/,8 mm 476 VE ONG ROUN NOSE PIERS * long round jaws

10 06 VE 08 VE VE 06 VE ONG NOSE PIERS WITH SIE UTTER E * gripping surface serrated * half round jaws VE * jaws bent to an angle of 4 * gripping surface serrated * half round jaws medium hard wire soft wire usn6 (ISO47) N/mm 0 N/mm ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, ENT E E 08 VE * gripping surface serrated * half round jaws ONG NOSE PIERS WITH SIE UTTER N PIPE GRIP, STRIGHT E medium hard wire soft wire usn6 (ISO47) N/mm 0 N/mm E E medium hard wire soft wire usn6 (ISO47) N/mm 0 N/mm

11 40 VE 478 VE VE 40 VE INESMNS PIERS E VE E SHERS soft wire usn6 (ISO47) medium hard wire N/mm 0 N/mm * FOR UTTING THE E WITHOUT STEE WIRE Ø 478 VE VE WIRE STRIPPING PIERS * screw adjustment of the stripping depth from 0,6 mm 0 mm * spring for reopening mm

12 60 VE I 6 VE I 6 VE I 6 VE I ROSSTIP (PH) SREWRIVER WITH INSUTE E, VE I 60 S6 VE I 60 S6T VE I WITH VOTGE TESTER PH VE I EETRIIN`S SREWRIVER, I 60 S6 VE I SET OF SREWRIVERS VE I SET/pcs ONTENTS: rt. 60 VE I 6 VE I imension 0.4x.x7+0.8x4.0x00.0x.x+.x6.x0 PH x+ph x00 Pcs 6 VE I OUE-ROSSTIP (PZ) SREWRIVER WITH INSUTE E, VE I 60 S6T VE I SET OF SREWRIVERS VE I PZ SET/pcs ONTENTS: rt. imension Pcs 60 VE I 6 VE I 60 VE 0.8x4.0x00+.0x.x+.x6.x0 PH x+ph x00

13 60 VE 6 VE 6 VE 60 S6 VE 60 VE 60 S6T VE WITH VOTGE TESTER 60 VE EETRIIN`S SREWRIVER, VE 6 VE ROSSTIP (PH) SREWRIVER WITH INSUTE E, VE VE OUE ROSSTIP (PZ) SREWRIVER WITH INSUTE E, VE PH VE VOTGE TESTER 0-0 V * dimension with clip PZ , S6 VE SET OF SREWRIVERS VE 60 S6T VE SET OF SREWRIVERS VE SET/pcs ONTENTS: SET/pcs ONTENTS: rt. 60 VE 6 VE imension 0.4x.x7+0.8x4.0x00.0x.x+.x6.x0 PH x+ph x00 Pcs rt. imension Pcs 60 VE 6 VE 60 VE 0.8x4.0x00+.0x.x+.x6.x0 PH x+ph x00 4 4

14 60 S0 VE I 60 S0 VE 60 S0 VE I SET OF SREWRIVERS VE I ON ISPY STN 60 S0 VE SET OF SREWRIVERS VE ON ISPY STN Set/pcs Set/pcs rt. 60 VE I 6 VE I 6 VE I mm,0x00 4,0x00,x 6,x0,x8,0x7 PH 0x60 PH x PH x00 PZ x PZ x00 pcs rt. 60 VE 6 VE 6 VE mm,0x00 4,0x00,x 6,x0,x8,0x7 PH 0x60 PH x PH x00 PZ x PZ x00 pcs