PAVER DETAILS. Paver Series 6 Nationwide Distribution. Detail stepstoneinc.com PAGE #
|
|
|
- Claud Warner
- 5 years ago
- Views:
Transcription
1 PAVER DETAILS GENERAL PAVER DETAILS Paver Sizes CalArc Pavers - General s Large Scale CalArc Pavers - General s Hexagonal Pavers - General s Ashlar Pattern Guide Random Pattern Guides NARROW MODULAR PAVERS BY STEPSTONE, INC. Narrow Modular Pavers-General s Narrow Modular Tile WAVE PAVER Wave Paver 3 x 12 x 4 Wave Paver 4 x 12 x 4 DIAMOND PAVER Diamond Paver 2-1/2 thickness Diamond Paver 4 thickness SONORASTONE PAVERS Sonorastone Pavers - General s Borderstone TRUNCATED DOME PAVER Aligned Truncated Dome Paver PAGE # Page 1
2 CALARC PAVER SIZES: 8 x 16 x 2 12 x 12 x 2 12 x 24 x 2 16 x 16 x 2 18 x 18 x 2 18 x 24 x 2 18 x 36 x 2 24 x 24 x 2 NARROW MODULAR PAVER SIZES: 3 x 9 x 4 3 x 12 x 4 3 x 18 x 4 3 x 24 x 4 LARGE SCALE CALARC PAVER SIZES: 6 x 12 x 2-1/2 6 x 18 x 2-1/2 6 x 24 x 2-1/2 6 x 36 x 2-1/2 6 x 48 x 2-1/2 3 x 18 x 2-1/2 (Tile) 12 x 12 x 4 8 x 16 x 2-1/2 8 x 24 x 2-1/2 8 x 36 x 2-1/2 8 x 48 x 2-1/2 12 x 18 x 2-1/2 12 x 24 x 2-1/2 12 x 36 x 2-1/2 12 x 48 x 2-1/2 12 x 60 x 2-1/2 18 x 36 x 2-1/2 18 x 48 x 2-1/2 24 x 24 x 2-1/2 24 x 36 x 2-1/2 24 x 48 x 2-1/2 30 x 30 x 2-1/2 36 x 36 x 2-1/2 48 x 48 x 2-1/2 DIAMOND PAVER SIZES: Connector A 11-15/16 x 2-7/8 x 5-7/8 x 2-1/ /16 x 3-7/8 x 7-7/8 x 2-1/ /16 x 5-7/8 x 11-7/8 x 2-1/2 Whole 23-7/8 x 2-7/8 x 5-7/8 x 2-1/2 23-7/8 x 3-7/8 x 7-7/8 x 2-1/2 23-7/8 x 5-7/8 x 11-7/8 x 2-1/2 Connector B 23-7/8 x 2-7/8 x 4-3/8 x 2-1/2 23-7/8 x 3-7/8 x 5-7/8 x 2-1/2 23-7/8 x 5-7/8 x 8-7/8 x 2-1/2 HEXAGONAL PAVER SIZES: Whole 16 x 2 20 x 2-1/2 24 x 2-1/2 Flat Half 16 x 2 20 x 2-1/2 24 x 2-1/2 Point Half 16 x 2 20 x 2-1/2 24 x 2-1/2 WAVE PAVER SIZES: 2-3/4 x 12 x 4 3-7/8 x 12 x 4 SONORASTONE PAVER SIZES: 12 x 12 x 2 12 x 24 x 2 18 x 18 x 2 18 x 24 x 2 18 x 36 x 2 24 x 24 x 2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 NARROW MODULAR PAVERS ISOMETRIC VIEW NOTES: 1. NARROW MODULAR PAVERS SHOWN ABOVE SHALL BE 4" THICK AS MANUFACTURED BY STEPSTONE, INC. PAVERS SHALL HAVE A MINIMUM COMPRESSIVE STRENGTH OF 5,000 P.S.I. 2. NARROW MODULAR PAVERS BY STEPSTONE INC ARE MANUFACTURED WITH i" SPACER FOR INSTALLATION 3. THESE PAVERS CAN BE MORTAR SET OR SAND SET 4. SANDBLAST FINISH - LIGHT, MEDIUM OR HEAVY 5. NARROW MODULAR PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS AND SIZES MAY BE AVAILABLE UPON REQUEST. 6. ALL DIMENSIONS ARE NOMINAL. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES NARROW MODULAR PAVERS- GENERAL DETAILS SCALE:N.T.S. Page 12
13 Page 13
14 I, TOP VIEW 11 7 TOP VIEW 11 r e2 (") r-- N N L -r-r 1 M N N L-. 1 SIDE VIEW t23/4"t EJ1,f- 27/8" + SIDE VIEW t 23/4" t IEJ,f- 27/8" + PIECE-A =! ISOMETRIC VIEW PIECE-B =! NOTES: 1. WAVE PAVERS SHOWN ABOVE SHALL BE 4" THICK AS MANUFACTURED BY STEPSTONE, INC. PAVERS SHALL HAVE A MINIMUM COMPRESSIVE STRENGTH OF 5,000 P.S.I. 2. THESE PAVERS CAN BE MORTAR SET OR SAND SET. 3. SANDBLAST FINISH - LIGHT, MEDIUM OR HEAVY. 4. WAVE PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 5. ALL DIMENSIONS ARE NOMINAL. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES.! ISOMETRIC VIEW WAVE PAVER PIECES A & B 3" x 12" x 4" SCALE: N.T.S. Page 14
15 I, "" r-- "" "" SIDE VIEW t 33/4" t r -f"" 3 7/8" f SIDE VIEW t 33 / 4" t EJ1 -f"" 3 7/8" f ISOMETRIC VIEW PIECE-A=! NOTES: 1. WAVE PAVERS SHOWN ABOVE SHALL BE 4" THICK AS MANUFACTURED BY STEPSTONE, INC. PAVE SHALL HAVE A MINIMUM COMPRESSIVE STRENGTH OF 5,000 P.S.I. 2. THESE PAVERS CAN BE MORTAR SET OR SAND SET. 3. SANDBLAST FINISH - LIGHT, MEDIUM OR HEAVY. 4. WAVE PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 5. ALL DIMENSIONS ARE NOMINAL. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES WAVE PAVER PIECES A & B 4" x 12" x 4" SCALE: N.T.S. Page 15
16 WIDTH A TOP VIEW LENGTH HEIGHT ISOMETRIC VIEW WIDTH B HEIGHT SIDE VIEW TAB HEIGHT LENGTH HEIGHT: TAB HEIGHT: LENGTH: WIDTH A: WIDTH B: 2 1 2" 1 7 8" " 2 7 8" 5 7 8" 2 1 2" 1 7 8" " 3 7 8" 7 7 8" 2 1 2" 1 7 8" " 5 7 8" " NOTES: 1. PRECAST UNITS ARE INDIVIDUALLY HAND CAST. LENGTHS ARE APPROXIMATE. SOME VARIATIONS ARE EXPECTED. 2. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH GENERALLY ACCEPTED MASONRY PRACTICES. 3. DIAMOND PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 4. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES. 5. TABS ARE LOCATED ALONG ALL EDGES TO PROVIDE UNIFORM JOINT SPACING. DIAMOND PAVER SCALE: N.T.S. Page 16
17 WIDTH A TOP VIEW LENGTH HEIGHT WIDTH B ISOMETRIC VIEW HEIGHT SIDE VIEW TAB HEIGHT LENGTH HEIGHT: TAB HEIGHT: LENGTH: WIDTH A: WIDTH B: 2 1 2" 1 7 8" " 2 7 8" 5 7 8" 2 1 2" 1 7 8" " 3 7 8" 7 7 8" 2 1 2" 1 7 8" " 5 7 8" " NOTES: 1. PRECAST UNITS ARE INDIVIDUALLY HAND CAST. LENGTHS ARE APPROXIMATE. SOME VARIATIONS ARE EXPECTED. 2. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH GENERALLY ACCEPTED MASONRY PRACTICES. 3. DIAMOND PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 4. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES. 5. TABS ARE LOCATED ALONG ALL EDGES TO PROVIDE UNIFORM JOINT SPACING. DIAMOND POINT HALF PAVER SCALE: N.T.S. Page 17
18 WIDTH A TOP VIEW LENGTH HEIGHT ISOMETRIC VIEW WIDTH B HEIGHT SIDE VIEW TAB HEIGHT LENGTH HEIGHT: TAB HEIGHT: LENGTH: WIDTH A: WIDTH B: 2 1 2" 1 7 8" " 2 7 8" 4 3 8" 2 1 2" 1 7 8" " 3 7 8" 5 7 8" 2 1 2" 1 7 8" " 5 7 8" 8 7 8" NOTES: 1. PRECAST UNITS ARE INDIVIDUALLY HAND CAST. LENGTHS ARE APPROXIMATE. SOME VARIATIONS ARE EXPECTED. 2. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH GENERALLY ACCEPTED MASONRY PRACTICES. 3. DIAMOND PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 4. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES. 5. TABS ARE LOCATED ALONG ALL EDGES TO PROVIDE UNIFORM JOINT SPACING. DIAMOND FLAT HALF PAVER SCALE: N.T.S. Page 18
19 WIDTH A TOP VIEW LENGTH HEIGHT ISOMETRIC VIEW WIDTH B HEIGHT SIDE VIEW TAB HEIGHT LENGTH HEIGHT: TAB HEIGHT: LENGTH: WIDTH A: WIDTH B: 4" 3 3 8" " 2 7 8" 5 7 8" 4" 3 3 8" " 3 7 8" 7 7 8" 4" 3 3 8" " 5 7 8" " NOTES: 1. PRECAST UNITS ARE INDIVIDUALLY HAND CAST. LENGTHS ARE APPROXIMATE. SOME VARIATIONS ARE EXPECTED. 2. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH GENERALLY ACCEPTED MASONRY PRACTICES. 3. DIAMOND PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 4. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES. 5. TABS ARE LOCATED ALONG ALL EDGES TO PROVIDE UNIFORM JOINT SPACING. DIAMOND PAVER SCALE: N.T.S. Page 19
20 WIDTH A TOP VIEW LENGTH HEIGHT WIDTH B ISOMETRIC VIEW HEIGHT SIDE VIEW TAB HEIGHT LENGTH HEIGHT: TAB HEIGHT: LENGTH: WIDTH A: WIDTH B: 4" 3 3 8" " 2 7 8" 5 7 8" 4" 3 3 8" " 3 7 8" 7 7 8" 4" 3 3 8" " 5 7 8" " NOTES: 1. PRECAST UNITS ARE INDIVIDUALLY HAND CAST. LENGTHS ARE APPROXIMATE. SOME VARIATIONS ARE EXPECTED. 2. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH GENERALLY ACCEPTED MASONRY PRACTICES. 3. DIAMOND PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 4. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES. 5. TABS ARE LOCATED ALONG ALL EDGES TO PROVIDE UNIFORM JOINT SPACING. DIAMOND POINT HALF PAVER SCALE: N.T.S. Page 20
21 WIDTH A TOP VIEW LENGTH HEIGHT ISOMETRIC VIEW WIDTH B HEIGHT SIDE VIEW TAB HEIGHT LENGTH HEIGHT: TAB HEIGHT: LENGTH: WIDTH A: WIDTH B: 4" 3 3 8" " 2 7 8" 4 3 8" 4" 3 3 8" " 3 7 8" 5 7 8" 4" 3 3 8" " 5 7 8" 8 7 8" NOTES: 1. PRECAST UNITS ARE INDIVIDUALLY HAND CAST. LENGTHS ARE APPROXIMATE. SOME VARIATIONS ARE EXPECTED. 2. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH GENERALLY ACCEPTED MASONRY PRACTICES. 3. DIAMOND PAVERS ARE AVAILABLE IN TWELVE (12) STANDARD COLORS. CUSTOM COLORS MAY BE AVAILABLE UPON REQUEST. 4. ALL SIDES HAVE DRAFT. SEE SPECIFICATIONS FOR TOLERANCES. 5. TABS ARE LOCATED ALONG ALL EDGES TO PROVIDE UNIFORM JOINT SPACING. DIAMOND FLAT HALF PAVER SCALE: N.T.S. Page 21
22 Page 22
23 Page 23
24 Page 24
Large Scale CalArc Pavers for Sand-Set Pedestrian Use Installations
The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Sand-Set Pedestrian Use Installations Large Scale CalArc Pavers are part of the California Architectural
SECTION MANHOLES
SECTION 02601 MANHOLES PART 1 GENERAL 1.01 SCOPE OF WORK A. WORK required under this section consists of all materials, accessories, equipment, tools, and labor required to install precast concrete standard
MANHOLES PART I: GENERAL. A. Precast Concrete Manholes
MANHOLES PART I: GENERAL A. Precast Concrete Manholes 1) Manholes shall be made of precast concrete sections of which the top section shall be eccentric or flat slab top. The bottom section shall be a
CARRIER OVERHANG 1'-0" MAX PANEL LENGTH 3'-0" MIN - 16'-0" MAX (RECOMMENDED) SPECIFICATIONS (unless noted otherwise)
DETAIL 5 32 5 " 27 32 " 6" OPTIONAL FLAT RECESSED CLOSURE 1 1 4 " 17 32 " 1 25 32 " OPTIONAL BUTTERFLY CLOSURE CARRIER OVERHANG 1'-0" MAX CARRIER SPAN 4'-0" 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
Woven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
1. In the Y direction: to the vertical axis of the wall (middle of the wall)
Installation of TENLOC Panel Connectors Precast Factory Installation of the TENLOC The is placed into the reinforcement of the wall and attached to the mold with nails. The wall thickness must be minimum
Midwest Roadside Safety Facility
19'-11 1/2" 6083 239'-11 1/2" 73139 Impact 1100C 25 43 5/16" 1100 upstream from the upstream face of the first shear fender downstream of the joint between barrier nos. 7 and 8 Upstream End Downstream
SECTION MANHOLES
SECTION 33 05 13 MANHOLES PART 1 GENERAL 1.01 SECTION INCLUDES A. CONTRACTOR shall furnish and install precast concrete manhole base, sections, adjusting rings, steps, and manhole ring and cover, complete.
Conduct-o-Seal Oriented Wire in Silicone Gasket Material
East Coast Shielding Oriented wire in silicone gasketing material is a combination EMI shield and environmental pressure seal. Produced on location, this product is fabricated with individual wires positioned
PART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
Standard Specifications
Standard Specifications PART 1.00 GENERAL 1.01 DECRIPTION SECTION 02620 PRECAST REINFORCED CONCRETE SANITARY MANHOLES A. Work included: The Contractor shall furnish all labor, materials, equipment, and
Construction Tolerances - The following tolerances apply to cast-in-place structures:
00540.40(b) Construction 00540.40 Tolerances - The following tolerances apply to cast-in-place structures: (a) Foundation Footings: (1) Lateral Alignment: Actual (as cast) location of the center of gravity:
Why Do We Saw Equipment Types Matching Equipment to the Project Blade Selection Ensuring Construction Quality When Things Don t Go Right The Sawing
Why Do We Saw Equipment Types Matching Equipment to the Project Blade Selection Ensuring Construction Quality When Things Don t Go Right The Sawing Window Summary Controlled Cracking Uncontrolled Cracking
3400 Tectura Designs Precast Concrete
3400 Tectura Designs Precast Concrete PART 1 - GENERAL 1.1 SUMMARY A. Perform all work required to furnish and complete the proper installation of precast concrete. B. Types of Precast Concrete work include:
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
A. Extent of structural precast concrete work is shown on drawings and in schedules.
SECTION 03 41 00 - STRUCTURAL PRECAST CONCRETE PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification
2016 Specification Treads, Base, Stringers and other Amenities Wausau Tile Precast Epoxy Terrazzo
2016 Specification Treads, Base, Stringers and other Amenities 09400 Wausau Tile Precast Epoxy Terrazzo PART 1 - GENERAL 1.1 SUMMARY A. Perform all work required to complete, as indicated by the Contract
STANDARD 3-PIECE CULTURED MARBLE PANEL INSTALLATION GUIDE
STANDARD -PIECE CULTURED MARBLE PANEL This installation guide applies to all standard -piece panel systems extending to the ceiling where each wall is manufactured in one piece. PH 70.59.55 F 70.59.559
NATURAL STONE PRODUCTS.
NATURAL STONE PRODUCTS www.k2stone.com INSPIRATION GALLERY ARBUTUS FIELDSTONE AUTUMN FLAME LEDGESTONE NATURAL / ARBUTUS BLEND BLACK PEARL LEDGESTONE AUTUMN GOLD LEDGESTONE K2 STONE VENEER PROFILES VIEW
TYPE 4-C TYPE 6 TYPE 7 TYPE 8
````` Face of ase rad. 42 TYPE rad. " T T T 22.5 2'- unless otherwise shown on plans 5" 5" 5" Slope 2: TYPE 2 rad. Concrete TYPE 2-A rad. Wearing Course Concrete ase Course TYPE 2-0" rad. TYPE 3 As Shown
SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
Installing flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
Technical Bulletin. Tolerances in the Dimension Stone Industry
Volume VII, Issue II September 2014 Tolerances in the Dimension Stone Industry 1. Nothing in manufacturing, construction, or commerce is exact. Whether we re talking about the weight of a product we purchase
Look Our New Technology
1. PRECAST WALL CONNECTORS Tunel Pey Khazar PSK Wall Nail are precast wall connectors designed for tension splicing. The structural connection between precast wall and other concrete element is achieved
White Paper WP008. Cover. 1/14 1/14 Architectural Precast Applications. Architectural Precast Applications
White Paper Cover White Paper Architectural Design Options Architectural precast concrete applications offer numerous advantages and maximum freedom from a design standpoint. Architectural options can
Studio Face Xtreme 6020 Installation Instructions (Nickel , Black )
Packing List Face Trim (4 Pieces) (3) Hanging Brackets (9) 3/16 x 1-1/4 Masonry Screws 9/64 Drill Bit Compatibility (2) Lower Brackets w Magnets (2) Lower Facing Plates (4) 2 Drywall Screws Trim Hardware
SPECIFICATIONS FOR THE MANUFACTURE AND DESIGN OF PRECAST THREE SIDED ARCH STRUCTURES, WINGWALLS AND HEADWALLS
SPECIFICATIONS FOR THE MANUFACTURE AND DESIGN OF PRECAST THREE SIDED ARCH STRUCTURES, WINGWALLS AND HEADWALLS 1. DESCRIPTION THESE SPECIFICATIONS ARE FOR A PRECAST THREE SIDED ARCH STRUCTURE, HEADWALLS
1. Architectural precast concrete cladding units.
SECTION 034500 - PRECAST ARCHITECTURAL CONCRETE PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Architectural precast concrete cladding units. 1.2 DEFINITION A. Design Reference
SECTION 39 - MANHOLES TABLE OF CONTENTS
SECTION 39 - MANHOLES TABLE OF CONTENTS Section Page 39-1 GENERAL... 39.1 39-2 PRECAST CONCRETE MANHOLES... 39.1 39-2.01 Precast Concrete Sewer Manholes... 39.1 39-2.02 Precast Concrete Storm Drain Manholes...
MONOPRICE. Above Fireplace Pull-Down Full-Motion TV Wall Mount. User's Manual P/N 27773
MONOPRICE Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 27773 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
JVI Vector Connector
The JVI Vector Connector User Guidelines 1 of 11 INTRODUCTION JVI designed the Vector Connector for use as shear and alignment connections between precast concrete elements such as double-tee flanges,
AirBorn Inc. Product Technical Bulletin #31
AirBorn Inc. Product Technical Bulletin #31 INSTALLATION OF R-SERIES CONNECTORS WITH PRESS-FIT TERMINATIONS 1. PURPOSE This purpose of this application note is to assist customers in the proper application
HC Precast System ( 100 % Malaysia Technology With 6 IPs ) IBS Concept
HC Precast System ( 100 % Malaysia Technology With 6 IPs ) Economical. Eco Friendly. Quality IBS Concept In the construction of a building, there are always 4 types of joint namely L-shape T-shape Cross
.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
SECTION STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 05 12 00 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
B. Installation Instructions. Provide installation instructions, including any special equipment, to address the following.
SAMPLING AND TESTING. The Sampling and Testing requirements contained in -03 shall apply. MARKING. The Marking requirements contained in -03 shall apply. FINAL PRODUCTION INSPECTION. The Final Production
MASONRY TOOLS 370-AF SURE. SURE GRIP-FIBERGLASS HANDLE Sure ridged handle grip provides for comfortable feel and shock resistance
MASONRY TOOLS WASHINGTON PATTERN BRICK HAMMERS Our brick hammers are made of high-grade forged hammer steel Specially heat treated to maintain a keen cutting edge Perfectly balanced and superior in every
Double Storey HC Precast System Drawing - 3D
Double Storey HC Precast System Drawing - 3D Superstructure ( Frame & Wall ) : - By HC Precast System Sub- Structure By Other : - Appointed By Client 77 % 23 % INDUSTRIALISED BUILDING SYSTEM ( IBS ) is
SECTION PUBLIC UTILITY MANHOLES AND STRUCTURES. 2. Modular precast concrete pump wetwell. 5. Manhole bedding and cover materials.
SECTION 02082 PUBLIC UTILITY MANHOLES AND STRUCTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Modular precast concrete manholes with tongue-and-groove joints, transition to cover frame, covers,
ECONO QUALITY A value quality, entry level grade blade for the extremely cost conscious user Provides good cutting performance at low initial cost Ideal for first time and occasional users PREMIUM QUALITY
Building Instructions V 1.0 for a Styrene R0 Dome
Building Instructions V 1.0 for a Styrene R0 Dome Created by R2 Builders Sweden: Lars-Åke Siggelin, Lars Lindberg, Alexander Arvidsson & David Bergelv This building instruction is using 1mm and 3mm Polystyrene,
#3 Domed Head Plow Bolt Standard Thread and Body Length
#3 Domed Plow Bolt Standard Thread and Body Length Flat vs Dome Plow Bolts Flat (per ASME B18.9) Domed Designs Supplied by Earnest (per Cat 1E44) Industry practice is to call a # 3 head plow bolt that
TECHNICAL DRAWING HIGHER LEVEL PAPER II(A) ENGINEERING APPLICATIONS
M. 84 AN ROINN OIDEACHAIS AGUS EOLAÍOCHTA LEAVING CERTIFICATE EXAMINATION, 2001 TECHNICAL DRAWING HIGHER LEVEL PAPER II(A) ENGINEERING APPLICATIONS Friday, 15 June, Afternoon 2.00 5.00 p.m. 200 Marks INSTRUCTIONS
National Quali cations Date of birth Scottish candidate number
N5FOR OFFICIAL USE X735/75/0 National Quali cations 207 Mark Graphic Communication WEDNESDAY, 0 MAY :00 PM 2:30 PM *X735750* Fill in these boxes and read what is printed below. Full name of centre Town
GRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
Manhole or Catch Basin Type A & B Cone Sections Precast - Design F Manhole or Catch Basin Cover (Reducer Cone Section Precast) Design D
MINNESOTA DEPARTMENT OF TRANSPORTATION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management and Technical Support, Design Support Section TRANSMITTAL LETTER NO. (14-02) MANUAL: Standard
Engineered Hardwood Flooring Installation Instructions
Engineered Hardwood Flooring Installation Instructions 1 Important Information before You Begin 1.1 Installer/Owner Responsibility Carefully inspect all materials before installation. Materials installed
Dimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
Accessories for the Model 920 Lapping and Polishing Machine
Accessories for the Model 920 Lapping and Machine Applications Laboratory Report Introduction polishing is a common practice in many materials preparation laboratories. Instrumentation for materials processing
SECTION SAND CUSHION TERRAZZO FLOORING
SECTION 09 66 13.13 SAND CUSHION TERRAZZO FLOORING THIS GUIDE SPECIFICATION HAS BEEN PREPARED BY THE NATIONAL TERRAZZO AND MOSAIC ASSOCIATION, INC., AND IS DISTRIBUTED FOR USE BY ITS MEMBERS AND DESIGN
Kent Fold Down Bollard
Kent Fold Down Bollard Specify: Kent Fold Down Bollard ; 101mm Diameter; 3mm Wall; Grade 316L Stainless Steel; Bright Satin Finish; Fold Down. The Kent Fold Down Bollard () is manufactured from 101mm diameter
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
CE2045-PREFABRICATED STRUCTURES QUESTION BANK
CE2045-PREFABRICATED STRUCTURES QUESTION BANK UNIT I - INTRODUCTION PART A 1. Define prefabrication 2. What are the types of prefabricates based on i. Plan area ii Based on weight 3. What are the types
SCHMIDT HydroPneumaticPress
Maximum orce Range from 15 kn to 220 kn / 3,375 lbs. to 49,460 lbs. The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for optimally transforming, joining and assembling within
TV WALL MOUNT ASSEMBLY GUIDE RF-TVMLPT01V2
TV WALL MOUNT RF-TVMLPT01V2 For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...4 ASSEMBLY GUIDE Before
Comparable ISO Standard. Date of current standard/modified
Title Standard All-metal prevailing torque All-metal prevailing torque EN ISO EN ISO Comparable ISO Standard Date of current standard/modified 980 7042 27042 7042 1998-02 980 10513 30513 10513 1998-02
Standard Test Method for Measuring Warpage of Ceramic Tile 1
Designation: C 485 09 Standard Test Method for Measuring Warpage of Ceramic Tile This standard is issued under the fixed designation C 485; the number immediately following the designation indicates the
B. Terracotta Precast Facade Assembly consisting of single-leaf, through body color terracotta clay tiles.
SECTION 07 4229 TERRACOTTA CLAY TILE IN PRECAST SPECIFICTION FOR TERRART SOLID PART 1 GENERAL 1.1 SECTION INCLUDES A. Drawings and general provisions of the Contract, including General and Supplementary
SECTION PRECAST CONCRETE SECTIONAL MANHOLES
SECTION 02545 PRECAST CONCRETE SECTIONAL MANHOLES PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Precast reinforced concrete cylindrical sectional manholes, complete with openings, inserts, hardware,
INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS
PIEDMONT PACIFIC CORPORATION INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS 4703 Tidewater Ave., Suite G Oakland. CA, 94601, USA Ph: +1 510 434 0990 / Fax: +1 510 436 0990 www.piedmontpacific.com
Section 8. Curved units. Curved units
Section 8 Curved units Curved units Curved corner post... page 94 Curved base cabinet... page 95 Curved wall cabinet... page 96 Curved deep wall cabinet... page 97 Curved plinth - Joining... page 99 www.howdens.com
Overview The Thomas & Betts Method is Better. Just Four Easy Steps to a Perfect Connection! Step 1. Step 2
Overview The Thomas & Betts Method is Better. The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree of reliability in electrical wiring. This
712 - STRUCTURAL STEEL CONSTRUCTION SECTION 712 STRUCTURAL STEEL CONSTRUCTION
SECTION 712 STRUCTURAL STEEL CONSTRUCTION 712.1 DESCRIPTION Fabricate and erect the structural steel as designated in the Contract Documents. See SECTION 705 for fabrication of structural steel. Provide
Kent Airport Bollard KDCT-140/3
Airport Bollard Kent Airport Bollard Specify: Kent Airport Bollard ; 1200mm Overall Height; 3mm thick wall; Grade 316L Stainless Steel; Bright Satin finish; Cast in 300mm below the ground. The Kent Smiley
Foundation Specifications for 5.6-Meter Modular Earth Station Antennas
Installation Instructions Bulletin 237029 Foundation Specifications for 5.6-Meter Modular Earth Station Antennas Revision A Introduction This document specifies typical foundation characteristics, designs,
TI: Efficient self tapping fasteners into concrete without plugs
TI: Efficient self tapping fasteners into concrete without plugs Application specific fastener solutions for use either with solid or pre-cast concrete substrates are highly sought after. Indeed, some
Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests 1
Designation: D 2094 00 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests 1 This standard is issued under the fixed designation D 2094; the number immediately following the designation
Foundation Specifications for 7.6-Meter Modular Earth Station Antennas
Installation Instructions Foundation Specifications for 7.6-Meter Modular Earth Station Antennas Bulletin 237186A Revision A Introduction This document specifies typical foundation characteristics, designs,
SECTION 095 SPECIFICATIONS DETAIL DRAWINGS. Index of Detail Drawings
SECTION 095 SPECIFICATIONS DETAIL DRAWINGS Index of Detail Drawings Flat Top Manhole... 095-1 Splash Drop Manhole and Regular Drop Manhole... 095-2 Special Detail Splash Drop Manhole and Special Detail
Table of Contents F Series Frames
Table of Contents F Series Frames How to Order Frames... F 1 F Series Spec Sheet... F 2 F Series Profiles 1 of 6... F 3 F Series Profiles 2 of 6... F 4 F Series Profiles 3 of 6... F 5 F Series Profiles
Metrolinia Collection
Landscape Furniture www.marshalls.co.uk/landscapefurniture Metrolinia Collection Landscape Furniture Metrolinia Collection Marshalls Metrolinia Modular Seating system allows the designer to meet many of
RONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:
1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with
CountryAccents Pergola Assembly Instructions
CountryAccents Pergola Assembly Instructions Options 11 2" Squares Lattice Railing Gingerbread Scroll (For 5" Posts Only) Site Preparation Site preparation for either the round column or the 5" post pergola
Storage and Installation of welded LL Hollow Metal Door Frames in Steel Studs
Storage and Installation of welded LL Hollow Metal Door Frames in Steel Studs Introduction This guide specification is intended to stress the necessary precautions and requirements for receipt, storage,
IGGA Guide Specification: Dowel Bar Retrofit (DBR) Introduction
IGGA Guide Specification: Dowel Bar Retrofit (DBR) Introduction This standard developed by the International Grooving and Grinding Association (IGGA) specifies the procedures for construction of dowel
DX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
SITELINE CLAD-WOOD WINDOW DOUBLE-HUNG TABLE OF CONTENTS
TABLE OF CONTENTS 1 GENERAL INFORMATION Dimensional Windows Siteline Clad Double-Hung windows may be specified as "dimensional", by adjusting the desired rough opening width or height. Siteline Clad Double-Hung
Installation Instructions for Mincey Marble Manufacturing s Standard 3-Piece Panels [Not Extending to the Ceiling]
![Installation Instructions for Mincey Marble Manufacturing s Standard 3-Piece Panels [Not Extending to the Ceiling]](/thumbs/90/104106060.jpg "Installation Instructions for Mincey Marble Manufacturing s Standard 3-Piece Panels [Not Extending to the Ceiling]")
, inc. Mincey Marble Mfg., Inc. 4321 Browns Bridge Road Gainesville, GA 30504 Ph: 800.533.1806 Fx: 770.531.0935 www.minceymarble.com Installation Instructions for Mincey Marble Manufacturing s Standard
NRS Installation Manual
NRS Installation Manual Chair Mount Type Standard / EU Spec. KAZE (AY-KFPLU AY-NRS1 is shown.) OTO (AY-OLL AY-NRS1 is shown.) Separate Type (AY-NRS2B-W is shown.) Installer: Read through this installation
ADDENDUM NO. 1 THOROUGHBRED ROOM RENOVATION PHASE II DINING AREA MURRAY STATE UNIVERSITY, MURRAY, KY PROJECT #
ADDENDUM NO. 1 THOROUGHBRED ROOM RENOVATION PHASE II DINING AREA MURRAY STATE UNIVERSITY, MURRAY, KY PROJECT #13-046 10-23-2013 Bidders shall acknowledge receipt of this Addendum on the Bid Form, in the
KENT FLAT TOP BOLLARD KFTB101/3
FLAT TOP BOLLARD Specify: Kent Flat Top Bollard KFTB101/3; 1200mm Overall Height; 3mm thick wall; Grade 316L Stainless Steel; Bright Satin Finish; Cast in 300mm Below Ground. The Kent Flat Top Bollard
aluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
METHOD STATEMENT FOR VERSIJACK PAVER AND BEARER SUPPORT PREPARED BY ELMICH PTE LTD. VJ MStmt Ver2012(Jan) Page 1
METHOD STATEMENT FOR VERSIJACK PAVER AND BEARER SUPPORT PREPARED BY ELMICH PTE LTD VJ MStmt Ver2012(Jan) Page 1 METHOD STATEMENT VERSIJACK Paver and Bearer Support 1. Preparation of Installation Area Mark
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 33123 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
SECTION ARCHITECTURAL PRECAST CONCRETE PART 1 - GENERAL
SECTION 03450 - ARCHITECTURAL PRECAST CONCRETE PART 1 - GENERAL 1.01 DESCRIPTION A. Work of this section is subject to requirements of the Contract Documents including the General Conditions and Supplementary
TIMARU DISTRICT COUNCIL 2 King George Place P.O. Box 522 Timaru 7940 Telephone: Website:
INITIAL SURVEY ILE: CHANGES TO CORBEL DETAIL REVISION BY CHK APP. PLANNING.dwg 711696 AS SHOWN PERMISSION O THE CODE O PRACTICE TYPICAL PRECAST CONCRETE MANHOLE DETAILS 1 13 A B INITIAL SURVEY ILE: CHANGES
Parkers. Tolerances on dimensions
Aluminium and aluminium alloys - Extruded rod/bar, tube and pro les Alloy groups The division into Group I and Group II of the most commonly used general engineering alloys is specified in table 1. (Corresponding
Surface Developments. Sacramento City College Engineering Design Technology. Surface Developments 1
Surface Developments Sacramento City College Engineering Design Technology Surface Developments 1 Surface Developments A surface development is a full-size layout of an object made on a single flat plane.
IBS IS A SYSTEM NOT A MACHINE significantly difference from traditional cast in-situ construction which relies heavily on customized site work
IBS IS A SYSTEM NOT A MACHINE significantly difference from traditional cast in-situ construction which relies heavily on customized site work HC PRECAST SYSTEM MOULD SETTING - The wall is designed to
MILITARY SPECIFICATION SHEET SCREW, CAP, SOCKET HEAD- HEXAGON, CORROSION RESISTANT STEEL, UNC-3A
INCH-POUND MS16995H 25 April 1997 SUPERSEDING MS16995G 27 June 1995 MILITARY SPECIFICATION SHEET SCREW, CAP, SOCKET HEAD- HEXAGON, CORROSION RESISTANT STEEL, UNC-3A This specification is approved for use
Zip Block MODEL ZB INSTALLATION INSTRUCTIONS
Zip Block MODEL ZB 100-400 INSTALLATION INSTRUCTIONS 12BT EXPOSED SURFACE SEAL WIDTH Zip Block SEAL 3/4" ± 1/8" [19.05mm ± 3.18mm] BLOCKOUT EDGE 3 1/2" [88.90mm] MAXIMUM BLOCKOUT NOMINAL JOINT WIDTH EPOXY
2002 ADDENDUM to the 1997 NDS and PRIOR EDITIONS
AMERICAN FOREST & PAPER ASSOCIATION American Wood Council Engineered and Traditional Wood Products March 2002 2002 ADDENDUM to the 1997 NDS and PRIOR EDITIONS The 2001 Edition of the National Design Specification
CONSTRUCTION SPECIFICATION FOR MAINTENANCE HOLE, CATCH BASIN, DITCH INLET, AND VALVE CHAMBER INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 407 NOVEMBER 2013 CONSTRUCTION SPECIFICATION FOR MAINTENANCE HOLE, CATCH BASIN, DITCH INLET, AND VALVE CHAMBER INSTALLATION TABLE OF CONTENTS 407.01
TAPTITE Fasteners. High Performance Thread Rolling Screws for Metals
TAPTITE 2000 Fasteners High Performance Thread Rolling Screws for Metals TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners
STRUCTURES FOR SANITARY AND STORM SEWERS
SUDAS Standard Specifications Division 6 - Structures for Sanitary and Storm Sewers Section 600 - Structures for Sanitary and Storm Sewers STRUCTURES FOR SANITARY AND STORM SEWERS PART - GENERAL.0 SECTION
MH Table of Contents Standard Title/Scope Page Table of Contents SCE Public
MH Table of Contents Standard Title/Scope MH 300 MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Manholes Requirements MH 300.1 Manholes Requirements...........................................
Modular Gazebo Kit Series GardenHouse 12
Octagonal CUPOLA screened with louvers and light fixture Modular Gazebo Kit Series GardenHouse 12 with DOUBLE-TIERED Roof Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or