Ground Support Equipment Library of Past Stand Drawings
|
|
- Tyrone Darren Carroll
- 6 years ago
- Views:
Transcription
1 Ground Support Equipment Library of Past Stand Drawings Liftsafe Fall Protection Inc. Collection of Past Stand Drawings For Current Stand Drawings Please Refer to Their Appropriate Webpage
2 Past Engine Access Stand Drawings Liftsafe Fall Protection Inc. Collection of Past Stand Drawings For Current Stand Drawings Please Refer to Their Appropriate Webpage
3
4 ENGINE ACCESS STAND MODEL DF DESIGNED TO ACCESS TOP OF ENGINE UNDER AND OVER THE COWL FEATURES AND SPECIFICATIONS Working capacity = 300lbs. (single user) Self weight = 530lbs. (single user push) Adjustable pitch and height Sized to suit most wide body aircrafts For under the cowl and over the cowl access Extensive use of aluminum construction Stainless steel hardware Low maintenance self lubricating bushings Corrosion resistant powder coat finish ATACS bumper pads RUBBER D bumper on aircraft side Anti-fatigue and Anti-slip ladder rungs Easy turn screw jack pitch adjustment CALL US TODAY Liftsafe Fall Protection Inc. 306 Darrell Drive Ayr, Ontario N0B 1E0 E: info@liftsafeinspections.com W:
5 ENGINE ACCESS STAND MODEL DF DESIGNED TO ACCESS TOP OF ENGINE UNDER AND OVER THE COWL FEATURES AND SPECIFICATIONS Secondary locks for height and pitch Fall resistant anchorage on upper ladder Removable tool tray at top of upper ladder 10 castors for easy single user mobility Brakes and swivel locks on all castors Meets ANSI-ASC A Optional Accessories Corner leveling jacks Lift truck fork pockets Bolt on tow bar Foam filled rear pneumatic tires and rigid tow bar for long distance towing All steel construction (2 workers to push) CALL US TODAY Liftsafe Fall Protection Inc. 306 Darrell Drive Ayr, Ontario N0B 1E0 E: info@liftsafeinspections.com W:
6 Past Greasing Stand Drawings Liftsafe Fall Protection Inc. Collection of Past Stand Drawings For Current Stand Drawings Please Refer to Their Appropriate Webpage
7 Model No. : Work Oder No. Ref. Drawing: LIFTSAFE ENGINEERING & SERVICE GROUP INC. T. (519) / , info@liftsafeinspections.com F. (519) Part No. - Customer & Location: LIFTSAFE FALL PROTECTION AYR, ONTARIO Project: UNIVERSAL LANDING GEAR ACCESS STAND THIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THE PROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BE REPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT THIRD ANGLE PROJECTION ANGLE 1/2 Tolerance Unless Noted Otherwise FRACTION 1/16 DECIMAL PLACES.XXX INCHES ±.005.XX ±.010.X ±.020 MILLIMETRES ± 0.1 ± 0.3 ± 0.5 Checked By: Designed By: Drawn By: R.B. R.B. G.R. JAN MAR JAN Description: SIZE B SCALE: N.T.S. SHEET 1 OF 2 DWG NO: GA-REV.A REV AA
8 Model No. : Work Oder No. Ref. Drawing: LIFTSAFE ENGINEERING & SERVICE GROUP INC. T. (519) / , info@liftsafeinspections.com F. (519) Part No. - Customer & Location: LIFTSAFE FALL PROTECTION AYR, ONTARIO Project: UNIVERSAL LANDING GEAR ACCESS STAND THIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THE PROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BE REPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT THIRD ANGLE PROJECTION ANGLE 1/2 Tolerance Unless Noted Otherwise FRACTION 1/16 DECIMAL PLACES.XXX INCHES ±.005.XX ±.010.X ±.020 MILLIMETRES ± 0.1 ± 0.3 ± 0.5 Checked By: Designed By: Drawn By: R.B. JAN R.B. MAR G.R. JAN Description: SIZE SCALE: N.T.S. B SHEET 2 OF 2 DWG NO: GA-REV.A REV AA
9 Past Landing Gear Access Stand Drawings Liftsafe Fall Protection Inc. Collection of Past Stand Drawings For Current Stand Drawings Please Refer to Their Appropriate Webpage
10 SIGNATURE DATE REVISION HISTORY REV DESCRIPTION DATE APPROVED 3.0 ISSUED FOR PRODUCTION 3/2/2016 C.R. 48 STROKE 92 3/8 11 5/8 43 1/2 STROKE /8 95 9/ / / / /8 59 7/ STROKE GENERAL NOTES: 1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G W 2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G W 3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY A WELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47 DIVISION 4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS 5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLARE BEVEL U.N.O. THIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THE PROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BE REPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT THIRD ANGLE PROJECTION ANGLE 1/2 FRACTION 1/16 Tolerance Unless Noted Otherwise DECIMAL PLACES.XXX.XX.X INCHES ±.005 ±.010 ±.020 MILLIMETRES ± 0.1 ± 0.3 ± 0.5 Part No. V02253 Materials. Work Order No. Next Assembly. Checked By: Designed By: Drawn By: C.R. GR GR Customer & Location: LIFTSAFE FALL PROTECTION AYR, ON 3/2/2016 3/2/2016 3/2/2016 LIFTSAFE ENGINEERING & SERVICE GROUP INC. T. (519) / , info@liftsafeinspections.com F. (519) Description: SIZE B SCALE: N.T.S SHEET 1 OF 1 Project: WIDE BODY LANDING GEAR SERVICING STAND DWG NO: V02253 REV 3.0
11 T: (519) F:(519) SECTION 4 OBC A NO. ISSUANCE DESCRIPTION DATE BY NO. DRAWING LIST DESCRIPTION SECTION A-A SCALE 1 / 14 CONTRACTOR A PROJECT LOCATION THE BOEING COMPANY PROJECT TITLE NACELLE ACCESS STAND DRAWING TITLE ASSEMBLY DRAWING WORK ORDER NO. DRAWN BY: MC CHECKED BY: MC REVISION: 0 - SCALE: 3/8"=12" DF05-ASSY01 SHEET: 1 OF 2 36X24 (ARCH-D)
12 A T: (519) F:(519) SECTION 4 OBC ISSUANCE NO. DESCRIPTION DATE BY NO. DRAWING LIST DESCRIPTION SECTION A-A SCALE 1 / 24 CONTRACTOR PROJECT LOCATION THE BOEING COMPANY PROJECT TITLE NACELLE ACCESS STAND A DRAWING TITLE ASSEMBLY DRAWING WORK ORDER NO. DRAWN BY: MC CHECKED BY: MC REVISION: 0 - SCALE: 3/8"=12" DF05-ASSY01 SHEET: 1 OF 2 36X24 (ARCH-D)
13 Past Wheel Well Stand Drawings Liftsafe Fall Protection Inc. Collection of Past Stand Drawings For Current Stand Drawings Please Refer to Their Appropriate Webpage
14 SIGNATURE DATE REVISION HISTORY REV DESCRIPTION DATE APPRO A RELEASE FOR APPROVAL 12/07/2015 CR 53 1/ / / / /8 GENERAL NOTES: 1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G W 2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G W 3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY A WELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47 DIVISION 4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS 5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLARE BEVEL U.N.O. THIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THE PROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BE REPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT THIRD ANGLE PROJECTION ANGLE 1/2 FRACTION 1/16 Tolerance Unless Noted Otherwise DECIMAL PLACES.XXX.XX.X INCHES ±.005 ±.010 ±.020 MILLIMETRES ± 0.1 ± 0.3 ± 0.5 Part No. Materials. V01476 Work Order No. Next Assembly. Checked By: Designed By: Drawn By: CR CR Customer & Location: 12/7/ /7/2015 GR 12/7/2015 LIFTSAFE ENGINEERING & SERVICE GROUP INC. T. (519) / , info@liftsafeinspections.com F. (519) Description: SIZE B DESCRIPTION SCALE: N.T.S SHEET 1 OF 1 Project: DWG NO: WORK PLATFORM V01476 TARE WEIGHT: Weight REV A
15 AIRCRAFT OPENING 125 in 49 in 28 in REVISION HISTORY REV DESCRIPTION DATE APPROVED 1 GENERAL REV 03/27/15 20" TELESCOPIC WING Part No. Materials. Work Order No. LIFTSAFE ENGINEERING & SERVICE GROUP INC. T. (519) / , info@liftsafeinspections.com F. (519) Next Assembly. Customer & Location: LFP AVIONICS DIVISION Project: ACCESS STAND THIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THE PROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BE REPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT THIRD ANGLE PROJECTION ANGLE 1/2 FRACTION 1/16 Tolerance Unless Noted Otherwise DECIMAL PLACES.XXX.XX.X INCHES ±.005 ±.010 ±.020 MILLIMETRES ± 0.1 ± 0.3 ± 0.5 Checked By: Designed By: Drawn By: Description: DESCRIPTION SIZE SCALE: B N.T.S SHEET 1 OF 2 DWG NO: GA TARE WEIGHT: Weight REV 1
16 FOAM BUMPERS CHAINS C/W HEATSHRINK TUBING 4'-5 1 2" ALIMINUM HAND RAILS ALIMINUM GRIP SPAN TREADS SLIDING PLATFORM 3'-4 1 2" LOCKING MECHANISM 10'- 1 4" EXTENDED 7'- 1 4" COLLAPSED PROTECTION SHIELD ALIMINUM GRIP SPAN TREADS TOW BAR WINCH 10" 5'-11" 8' " 7,000 LB SIDEWIND JACK
400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS
12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions
More informationinstallation guide 1 GUIDE#: PWB-wwpontoon-pol-004
f250 pontoon WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks tower fits Pontoon boats with 96 to 102 inch wide beam widths. This measurement is taken from
More informationEMB MANUFACTURING INC.
TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Gen II Mount System For 2008 Ford Super Duty Kit 80140 (Large Frame Black) and Kit 80150 (Mid Frame Black) and Kit 80155 (Mid Frame Stainless) Your safety, and the safety
More informationACRO Building Systems
ACRO Building Systems America s Fastest Growing Supplier of Roofing Construction Tools and Equipment Made in the U A 6 Page Page 4 8 Page Phone: 800-267-3807 Phone: 414-445-8787 Fax: 414-445-8792 E-mail:
More informationThank you for purchasing out product! *Please read these instructions and follow them step by step. *
Page 1 of 7 AD17 AA DS 4 X 16 T12 Thank you for purchasing out product! *Please read these instructions and follow them step by step. * STEP 1. Slide two support posts (REF. # 24) into the two outside
More informationACRO Building Systems
DISTRIBUTED BY ACRO Building Systems Page 6 Made in the USA Page 4 8 Page Distributed by: BEST MATERIALS Ph: 800-474-7570, For more 602-272-8128 information www.bestmaterials.com Email: Sales@BestMaterials.com
More informationWalk-Behind Broadcast Spreader
January 1, 2019 Lit. No. 83679, Rev. 01 Walk-Behind Broadcast Spreader SP-8 & SP-8SS Parts List This document is for SnowEx SP-8 walk-behind broadcast spreaders beginning with serial numbers PD-288 and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Gen II Mount System For 2011-2012 Dodge Ram HD 4500/5500 Bracket Kit 90160 Your safety, and the safety of others, is very important. To help you make informed decisions
More informationHiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA
VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:
More informationS48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM
PAGE 1 OF 6 PORTA-DOCK, INC. S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM Thank you for purchasing our product! *Please read these instructions and follow
More informationUS RACK, Inc Falcon Drive, Madera, CA
US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for MOTORCYCLE RACK with Cradling Wheel Chocks WARNING: Do NOT attempt to install or use this rack without following all instructions.
More informationINSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only)
INSTALLATION MANUAL FRONT Level of Difficulty Moderate Product Photo (center section only) All hardware listed below will be provided with the bumpers center section. Additional hardware will be supplied
More informationThank you for purchasing our product! *Please read these instructions and follow them step by step.*
07/07/08.rev1 PAGE 1 OF 11 601AL VERTICAL 60120VL LIFT W/CHAIN DRIVE WINCH Thank you for purchasing our product! *Please read these instructions and follow them step by step.* Step 1. Separate and group
More informationQuickie Classic Parts Manual
Parts Manual Sunrise Medical Limited High Street, Wollaston, West Midlands, DY8 4PS Tel: +44 (0)1384 44 66 22 Fax: +44 (0)1384 44 66 44 sunmail@sunmed.co.uk www.sunrisemedical.co.uk QCLS/PM/JUL03/ISS1
More informationMODULAR BUMPER INSTALLATION MANUAL
MODULAR BUMPER INSTALLATION MANUAL Parts List* 1 Center section 1 Side extension, passenger / right 1 Side extension, driver / left 1 Side cap, passenger / right 1 Side cap, driver / left 1 Brush guard,
More informationFLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Trailer system.
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Winch Mount For 2011-2012 Chevrolet Silverado HD and GMC Sierra HD Bracket Kit 90165 Your safety, and the safety of others, is very important. To help you make informed
More informationTow-Behind Spreader 125 lb Capacity
Tow-Behind Spreader 125 lb Capacity IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Owners Manual #13696 13828 Rev. 07-149 SAFETY PRECAUTIONS 1. Always
More informationWARNING. Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 80156, 80160 Application: 2008 Ford F150 Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More informationFRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
More informationPORTA-DOCK, INC. AP17 APD DS 4 X 16 T12 AW17 CPD DS 4 X 16 T12
Page 1 of 7 PORTA-DOCK, INC. AP17 APD DS 4 X 16 T12 AW17 CPD DS 4 X 16 T12 *For Beige Decking Add the Letter B to Model* Thank you for purchasing out product! *Please read these instructions and follow
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Mounting System Dodge Ram Kit No. 65220, 73132, 75525, 76253 (black) or 65221, 73133, 75530, 76254 (stainless) As you read these instructions, you will see NOTES, CAUTIONS
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
More information767, 777, DC-10, L-1011, MD-11 Tow Bar Equipment Manual
514 MECKLEM LANE, ELLWOOD CITY, PENNSYLVANIA 16117 www.hallindustries.com E-mail: service@hallindustries.com 767, 777, DC-10, L-1011, MD-11 Tow Bar Equipment Manual Use This Manual for 1. Operating Procedures
More informationCRYSTEEL S. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S Grain Tipper mounting and operating instructions this manual must be included with the vehicle after completing the installation. Web Site E-Mail
More informationinstallation guide 1 GUIDE#: pwb-wwtowv1-pol-003
g300 WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationOperating, Servicing, and Safety Manual Model " Foot Shear CAUTION: Read and Understand
Operating, Servicing, and Safety Manual Model 3000 52" Foot Shear CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. SAFETY The purpose of the
More information" PLUG AERATOR. Model No. Safety Assembly Operation Maintenance Parts. CAUTION: Read Rules for Safe Operation and Instructions Carefully
owner s manual Model No. 45-0383 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts www.speedepart.com
More informationWALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623
WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623 Assembly, Operating, and Maintenance Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationHigh Wheel Cultivator Model HWC-243A
High Wheel Cultivator Model HWC-243A Owner s Manual and Parts List SAVE THIS MANUAL You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a safe, dry place
More informationOWNERS MANUAL. Model No UTILITY CART
OWNERS MANUAL Model No. 45-00 UTILITY CART CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts PRINTED IN USA FORM NO. 46274 LOOSE PARTS IN CARTON
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Winch Mount For 2007-2010 Chevrolet Silverado HD and GMC Sierra HD Bracket Kit 90140 Your safety, and the safety of others, is very important. To help you make informed
More informationBallooned by InspectionXpert. User: Brittany Belsito ; Expires: :33
1 2 3 4 REV SHEET 1 SPINDLE FITTING ASSEMBLY-LOCK LINK ATTACH, SIDE STRUT, MAIN THE PARTS LIST IN THIS REPORT SUPERSEDES THE DRAWING SHEET PARTS LIST FOR THIS PART OWNER LAND GEAR, C. REITZ, (425)294-6952
More informationBY ALIEN TECHNOLOGIES CORP
BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support
More informationinstallation guide 1 GUIDE#: pwb-assault-004
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationFOLDING TONNEAU RACK. 1. Rack Rail Assembly
FOLDING TONNEAU RACK Package Contents (2) Load Bars (4) Load Bar End Caps (4) ¼-20 x 9/16 Narrow Shoulder Hex Head Screw (28) ¼ Flat Washers (24) ¼ Split Lock Washers (20) ¼-20 x ¾ long Button Head Screws
More informationMechanical System Specifications & Detail Drawings
Mechanical System & Detail Drawings 1-888-989-1370 www.lundiausa.com RECOM GROUP INC. 449 Borrego Court San Dimas, CA 91773 Phone: (909) 599-1370 Fax: (909) 599-2291 MECHANICAL SYSTEM SPECIFICATIONS All
More informationMODEL 83 Pail Handler
MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE
More informationMarch 1, Fax:
March 1, 2017 U.S.A. Manufacturer The Cable Connection 52 Heppner Drive Carson City, Nevada 89706 800.851.2961 775.885.1443 Fax: 775.885.2734 E-mail: info@ultra-tec.com www.ultra-tec.com Framework You
More informationEMB Manufacturing Inc Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) Fax: (519) P200
BY EMB MFG INC. EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.embmfg.com P200 Pivoting Chainsaw Holder Accessory Installation Instructions
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For GMC Sierra 2500HD & 3500, + 03 Kit 76248/76249 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety
More informationM ACS Instructions
APPLICABLE MODELS: Nissan Frontier 2005 and up short bed with Utili-Trak mounting rails PACKAGE CONTENTS 00-0060-M-01-1205 ACS Instructions Leitner Designs 25675 Taladro Circle Unit E Mission Viejo, CA
More informationIllustrated Parts: Model 853
Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3
More informationHardware and Components:
Hardware and Components: (A) 4X 5/16 x 1 Carriage Bolt (B) 2X 5/16 x 2-1/4 Carriage Bolt (C) 2X 5/16 x 3-1/4 Hex Bolt (D) 2X 5/16 x 3/4 Hex Bolt (E) 2X 5/16 x 1-1/4 Hex Bolt (F) 5/16 x 2-1/4 Hex Bolt (G)
More informationParts list Instruction guide Warnings Please read carefully before assembling and using product.
Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket
More informationATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 10/13/2016 Issued: 12/17/2014 Visit www.ati-es.com for current status Revised: 06/05/2015 Page 1 of
More informationEMB Manufacturing Inc Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) Fax: (519) P200
BY EMB MFG INC. EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.embmfg.com Available: P210 Spare Pivoting Chainsaw Adaptor See page 6
More informationComponents of Gauge and Overview:
Cat 30 (Standard) and Cat 31 (Metric) Product Information and Usage Guide (Import) (Metric is used in demonstrations) Metric Standard Components of Gauge and Overview: The CAT 30 (standard) and CAT31 (metric)
More informationMICRO-AIR DOWNDRAFT TABLES INSTALLATION AND OPERATION MANUAL
MICRO-AIR DOWNDRAFT TABLES AND OPERATION MANUAL DDT480 & DDT70 Includes Installation, Operation, and Service Instructions IMPORTANT This manual contains specific cautionary statements relative to worker
More informationGENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
More informationParts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve
More informationParamount MYT Tripod User Guide
Paramount MYT Tripod User Guide Revision 1.1 December, 2014 Software Bisque, Inc. All rights reserved. Table of Contents MYT Tripod Setup and Use... 3 Height Adjustments... 3 Top Plate Adjustment... 7
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationUNPACKING. Thank you for purchasing the Manual Capsule Filling Machine from KARISHMA PHARMA MACHINES.
UNPACKING Thank you for purchasing the Manual Capsule Filling Machine from KARISHMA PHARMA MACHINES. Please take sufficient time and read this manual carefully before you start installation and operation
More informationParts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A
Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationRATCHET CABLE CUTTER
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 764 RATCHET CABLE CUTTER Read and understand this material before operating or servicing this equipment. Failure to understand how to safely operate this
More informationMECHANIC VISES VERSATILE, RUGGED AND BUILT WITH YOU IN MIND A B
wiltontool.com Wilton is committed to being a supplier you can depend on for the epitome of quality, innovation and service. This isn t just a statement to make us sound good it s a reality that has been
More informationHow We Installed Our 3-Link Banana Bracket:
How We Installed Our 3-Link Banana Bracket: General Description To avoid failure of your 3-link banana bracket, you will need to pay special attention to the installation. The clamp-on feature of the design
More informationDetroit Speed, Inc. Heavy Duty Leaf Spring Pocket Kit Camaro/Firebird P/N:
Detroit Speed, Inc. Heavy Duty Leaf Spring Pocket Kit 1967-69 Camaro/Firebird P/N: 040110 Thank you for purchasing the Detroit Speed Inc., Heavy Duty Leaf Spring Pocket Kit for your 1967-69 Camaro/Firebird.
More informationINSTRUCTION SHEET. PIECE INVENTORY - MOBILE BASES Refer to the diagram for part identification.
INSTRUCTION SHEET D2260 HEAVY-DUTY MINI-MOBILE BASE D2057 HEAVY-DUTY MOBILE BASE D2058 SUPER HEAVY-DUTY MOBILE BASE D2259 EXTENSION KIT FOR D2260/D2057 D2246 EXTENSION RAIL KIT FOR D2058 This Shop Fox
More informationCable Railing Kit Application Guide
Cable Railing Kit Application Guide January 2019 Nationwide Industries 10333 Windhorst Rd. Tampa, FL 33619 813.988.2628 Fax: 813.988.3465 Photo courtesy of FabWorx Framework You Will Need for Cable Railing
More informationParts Manual RZ4221 BF /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4221 BF / 9676101 Please
More informationPRO Series Brakes Operating Instructions
PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,
More informationHeavy and Medium Duty Fire Doors
Heavy and Medium Duty Fire Doors 10 06.06.2011 Add. Section 1.4. JES VK 09 14.12.2009 New doc. Frontpage JES VK 08 29.11.2006 Page 8 and 13 revised JES VK 07 08.11.2006 Page 15 revised JES VK 06 08.03.2005
More informationInstallation Instructions
FORD 20K Industry Standard Rail Custom Mounting Kit #2760 Gross Trailer Weight (Maximum)...20,000 lbs. Vertical Load Weight (Max. Pin Weight)...5,000 lbs. SYSTEM TOW CAPACITY Please note, in order to determine
More informationWARNING. B as e plate s. BX Saturn L Series Installation Instructions. Serial Number
B as e plate s BX3323 Please read BOTH these and the General Instructions before attempting to install or operate this equipment. Serial Number 1. Blue Ox towing products and accessories are intended to
More informationHardware Provided: - Eight (#8 Size) screws - Eight 1/2 (13) x 4 Hex Bolts - One 1 spindle Hex nut/washer
DESTROYER REAR BUMPER +TIRE CARRIER STEP 1 : GATHER YOUR TOOLS AND LAY OUT YOUR PARTS... Tools Required: - 16mm socket - 3/ 4 socket - 1 / 4 socket - ratchet - ratchet Extension - 3/4 wrench - tape measure
More informationAttachment Kit Ford 250 4x4 Super Duty Early 350 4x4 Super Duty Early 450 Super Duty Early 550 Super Duty Early
Fisher Engineering P.O. Box 529 Rockland, Maine 04841 September 2, 2005 Lit. No. 22303, Rev. 05 S Y S T E M Attachment Kit Ford 250 4x4 Super Duty 1999-04 Early 350 4x4 Super Duty 1999-04 Early 450 Super
More informationinstallation guide 1 GUIDE#: pwb-assault-001
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationExclusive Cantilever Gates
Exclusive Cantilever Gates Chainlink Gates Aluminum Cantilever Gates Single Track Box Frame Components & Hardware Upper Track Lower Track Z4 Truck Assembly Z8 Truck Assembly All Gates Feature Enclosed
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 7646 & 766 For GMC Sierra 500 As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has a specific purpose.
More informationRCF 3.4. Portable Traffic Signal - Technical Specifications. North America Traffic Inc REV#
RCF 3.4 Portable Traffic Signal - Technical Specifications Signal Controller Hardware Each signal controller shall be capable of providing the following feedback information to the user: Audible low battery
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 63470 For Ford 4x4 F150, F250 Light Duty & Expedition As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 6334 For Chevrolet Silverado 500HD & 3500 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of looks,
More informationA Captured Fastener, version 1.2
A Captured Fastener, version 1.2 By R. G. Sparber Copyleft protects this document. 1 I needed to be able to fasten two pieces of 16 gage 1" steel tubing together. There shall be no loose parts and no tools
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationBarricade Trail Force HD Rear Bumper w/ Tire Carrier installation (07-16 Wrangler JK)
Barricade Trail Force HD Rear Bumper w/ Tire Carrier installation (07-16 Wrangler JK) Installation Time: 2-3 Hours Tools Required: Tire iron Ratcheting socket set (ratchet plus 13, 16, 19mm sockets) Open
More informationInstallation Instructions
CHEVY / GMC 24K Industry Standard Rail Heavy Duty Custom Mounting Kit #2226 Gross Trailer Weight (Maximum)...24,000 lbs. Vertical Load Weight (Max. Pin Weight)...6,000 lbs. SYSTEM TOW CAPACITY Please note,
More informationWALCOOM. Walcoom Corporation SAFETY GRATING.
WALCOOM Walcoom Corporation SAFETY GRATING Diamond-Strut Safety Grating Diamond-Strut safety grating is made of carbon steel, stainless steel or aluminum by cold forming. It can be divided into three types:
More informationBX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
More informationInventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure
More informationWEAR SAFETY GLASSES WHEN INSTALLING THIS KIT.
INSTALLATION INSTRUCTIONS Trans4mer Mounting Systems Part No. 29753 (black) Part No. 65654 (stainless) for full size GM pickups, and Blazer, Yukon, Suburban, Tahoe As you read these instructions, you will
More informationKLOPPENBERG Quality is the Best Buy Furniture
Furniture Standard Bed Product Specifications Body: Frame: 5/8 Thick Interchangeable Panels 16 ga 1 ½ Type 304 tubular stainless steel with adjustable foot inserts, fully welded and polished joints Unit
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For Chevrolet Silverado 1500HD & 2500 Kit 68162 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of
More informationDetroit Speed, Inc. Heavy Duty Leaf Spring Pocket Kit X-Body P/N:
Detroit Speed, Inc. Heavy Duty Leaf Spring Pocket Kit 1968-74 X-Body P/N: 040111 Thank you for purchasing the Detroit Speed Inc., Heavy Duty Leaf Spring Pocket Kit for your 1968-74 X-Body. The DSE Leaf
More informationModel Assembly & Operating Instructions
30 SHEAR BRAKE ROLL Model 05907 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationSS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E
SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E Midwest Industries, Inc. Page 1 Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003231 REV A 1/25/05 Bundles
More informationWARNING VW Jetta New Installation Instructions BX3823. Serial Number
Please read BOTH these and the General Instructions before attempting to install or operate this equipment. Serial Number 1. Blue Ox towing products and accessories are intended to be installed by Blue
More informationTHANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER
THANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER Your safety and the safety of others is very important. Please read and understand all safety precautions before installing this or
More informationHOME GYM Owner s Manual
HOME GYM Owner s Manual Content Content-------------------------------------------------------------1 Safety precautions----------------------------------------------------2 Assembly instruction-------------------------------------------------3-12
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For 2007 Chevrolet Silverado 1500 and GMC Sierra 1500 Kit 75230 (Black) and 76007 (Stainless) Your safety, and the safety of others, is very
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More information