OZCO Project #223 - Wood Post & Beam Pavilion (20x32) - Free Standing

Transcription

1 OZCO Project #223 - Wood Post & Beam shown with 1x6 roof option 1

2 One Page Process #: 4002 Printing Documents from ISSUU Unfortunately, there is currently no way to print content directly through issuu. To print a publication, you will need to download it and print it from your computer. WEBSITE One of Two Access Points for ISSUU DIRECT You MUST create an account with Issuu or log in with Facebook or Google+ Below the publication is an icon click it Below the publication is a word Share click it Select the Download Option & Save the File to an easily accessed location. Open the downloaded file, View and/or Print as you want.

3 = = Overview-Front 2

4 = = Overview-Side V Installation Instructions, Specifications and Project Plans are effective May 1, 2015 and reflects information that available as of April 10, This information is updated periodically and should not be relied upon after October 15, Please visit to get current information. 3

5 ITEM NO. QTY. PART NUMBER DESCRIPTION x8 Post Base (8x8-PB-LS) "T" Tie Plate (TTP) Truss Accent (TA-LS) OWT Timber Screw 1-3/4" Butt Joint Flush (BJF) Truss Accent (TA-LS) Truss Accent " Standard Rafter Clip (RC-LS-4) Post to Beam Bolt Offset (P2B-BO-LS) OWT Timber Bolt 4-6" OWT Timber Bolt 6-8" OWT Timber Bolt 6-8" OWT Timber Bolt 6-8" OWT Timber Bolt 8-10" Truss Base Fan 8: Truss Accent (TA-LS) OWT Timber Screw 1-3/4" OWT Timber Screw 7-1/2" x6 Cedar Board 2x6x x6 Cedar Board 2x6x x8 Cedar Board 2x8x x4 Cedar Post 4x4x x6 Cedar Board 4x6x x6 Cedar Board 4x6x x6 Cedar Board 4x6x x10 Cedar Board 4x10x x10 Cedar Board 4x10x x10 Cedar Board 4x10x x8 Cedar Post 8x8x x8 Cedar Post 8x8x x8 Cedar Post 8x8x96.00 Bill of Material 4

6 Bill of Material

7 OZCO 6

8 Laredo Sunset vs. Ironwood 2 great styles same functionality Ironwood (517XX series) choose your connection lifestyle both styles available for most products Laredo Sunset (566XX series) V Installation Instructions, Specifications and Project Plans are effective May 1, 2015 and reflects information that available as of April 10, This information is updated periodically and should not be relied upon after October 15, Please visit to get current information. 7

9 x8 Cedar Board 207" with one 45 degree cut x10 Cedar Board 207" with 45 deg and lower dato cut x10 Cedar Board 207" with 45 deg and upper dato cut cutlist beam width beam width x10 Cedar Board " 8x8 Cedar Post 8 with dato cut for 10" beam Beam thickness 8x8 Cedar Post 8 with dato cut for 4x10 beam (full width) 8

10 305 R x4 Cedar Post 42" with corner support, beauty cut & mounting holes x6 Cedar Board x6 Cedar Board x6 Cedar Board x6 Cedar Board 2 scab support with chamfers 4x X cutlist

11 Suggested Tools (others may be required) 10

12 locate desired center of structure if site is not level, see Ozco Site Leveling instruction site 11

13 8x8 Cedar Post 8 with 2 4x10 beam cuts-left 8x8 Cedar Post 8 with dato cut for 10" beam double dato cut (Hex Cap Nut) Tool Required 3/8" Driver (OWT Screw) step 1 19

14 (Hex Cap Nut) Tool Required 3/8" Driver 4x10 Cedar Board " 4x10 Cedar Board 207" with 45 deg and lower dato cut (OWT Screw) = = 4x10 Cedar Board 207" with 45 deg and upper dato cut & step & note bolt spacing difference 19

15 6 (Hex Cap Nut) Tool Required 3/8" Driver (OWT Screw) 4x4 Cedar Post 42 with corner support & beauty cut & step 3 braces repeat 2x on each post 12 total 19

16 56611, & x6 Cedar Board 79" 4x6 Cedar Board 6 4x6 Cedar Board 14 all connectors are duplicated on both sides of each truss C L = = C L 2x optional screw installation 56611, & (Hex Cap Nut) Tool Required 3/8" Driver notch step 4 (OWT Screw) 19

17 2x6 Cedar Board 2 scab support with chamfers = = flush (Hex Cap Nut) Tool Required 3/8" Driver 2x8 Cedar Board 207" with one 45 degree cut step 5 (OWT Screw)

18 4x6 Cedar Board both sides (Hex Cap Nut) Tool Required 3/8" Driver (OWT Screw) C L both sides step 6 19

19 C L repeat previous step as shown = = step 7 19

20 116 boards = = roof option-1x6 19