SIMPSON STRONG-TIE CURTAIN WALL CLIPS AND BRIDGING CLIPS **as of **
|
|
- Georgina Bell
- 5 years ago
- Views:
Transcription
1 SIMPSON STRONG-TIE CURTAIN WALL CLIPS AND BRIDGING CLIPS **as of ** Nominal Size/Length/ Notes Model No. ClarkDietrich 3½" (16ga.) SCB43.5-KT FCSC 3.5 SLB362 WSC362 5½" (16ga.) SCB45.5-KT FCSC5.5, FCEC6 SLB600 WSC600 5½" (14ga.) MSCB45.5-KT FCSC5.5, FCEC6 SLB600 WSC600 7½" (16ga.) SCB47.5-KT FCEC8 SLB800 WSC800 7½" (14ga.) MSCB47.5-KT FCEC8 SLB800 WSC800 9½" (16ga.) SCB49.5-KT FCEC10 SLB1000 WSC ½" (16ga.) SCB411.5-KT FCEC12 SLB1200 WSC1200 Strut 9"-18" (Can be trimmed in the field) SSB3.518-KT FS12, FS15 SLS362-9 SLS SLS SLS SLS SLS OUTRIGGER Head-of_Wall Shouldered Screw 3¼" SCW3.25-KT FTC3 5½"- 11½"" SCW5.5-KT FTC5 VTD362 VTX362 SLD362 SL362 VTD600 VTX600 SLD600 SL362 3T1000 6T1000 3/4" XSH34B1414-RP83 3½" FCB43.5-R25 UCEC LB362 WRC362 Fixed-Clip Load Bearing Bridging Non-Load Bearing Bridging 5½" FCB45.5-R25 UXRC6 LB600 WRC600 7½" FCB47.5-R25 UXRC8 LB800 WRC800 9½" FCB49.5-R25 UXRC10 LB1000 WRC ½" FCB411.5-R25 UXRC12 LB1200 WRC1200 3⅝" - 8" Studs 3⅝" - 6" Studs LSUBH3.25-R150 SUBH3.25-R150 MSUBH3.25-R100 DBC2.5-R200 FB43 FB43 FB68 SPAZZER 9200 BRIDGE CLIP 1) Note that dimensions of x-reference parts will rarely be an exact match and that this could cause an issue with substituting one product for another. Gauges of x-reference parts may vary as well. 2) Because of the above notes, as well as other considerations, it is the responsibility of the Installer and Designer to determine if the Simpson Connector is
2 SIMPSON STRONG-TIE UTILITY CLIPS **as of ** Nominal Size/Length/Notes Model No. 2" x 4-1/2" x 10-1/4" (14ga.) SJC10.25-R15 ClarkDietrich LS541 LS681 E541 E681 S541 S681 X541 X681 JC JC JC JC JH UA1112 UA1312 UA1412 UA2212 (16 AND 14GA) 2" x 4-1/2" x 10-1/4" (12ga.) MSJC10.25-R15 LS971 E971 S971 JH JC UA1112 UA2212 UA1312 (12GA) Joist 2" x 4-1/2" x 8-1/4" (14ga.) SJC8.25-R15 LS549 LS689 E549 E689 S549 S689 X549 X689 JC JH UA119 UA1110 UA229 UA2210 UA139 UA1310 UA149 UA1410 (16&14ga.) 2" x 4-1/2" x 8-1/4" (12ga.) MSJC8.25-R15 LS979 E979 S979 X979 JH UA119 UA1110 UA229 UA2210 UA139 UA1310 UA149 UA1410 (12ga.) 1-3/8 " x 4" x 6-1/4" (16ga.) LSSC6.25-R30 LE547 LA547 E547 JH JC LA338 (16GA.) 1-3/8 " x 4" x 6-1/4" (14ga.) SSC6.25-R30 LE687 LA687 LS687 E687 U687 B687 X687 JH JC AL800 UA338 (14GA.) Stud 1-3/8 " x 4" x 6-1/4" (12ga.) MSSC6.25-R30 1-3/8 " x 4" x 4-1/4" (16ga.) LSSC4.25-R50 1-3/8 " x 4" x 4-1/4" (14ga.) SSC4.25-R50 1-3/8 " x 4" x 4-1/4" (12ga.) MSSC4.25-R50 2-1/4" x3" x 2-1/4" (14ga.) SSC2.25-R /4" x3" x 2-1/4" (12ga.) MSSC2.25-R90 LE977 LA977 LS977 E977 U977 B977 X977 LE545 E545 A546 UCEC UXRC6 LE685 LA685 E685 A686 UCEC LE975 LA975 E975 U975 X975 B975 A976 LE543 LE683 LA543 LA683 E543 E683 A543 A683 LS973 LE973 LA973 S973 E973 U973 B973 X973 A973 JH LB600 LB-HD AL600 AL362 JH JC LB362 JH JC UA118 UA228 LA338 (12GA.) LA335 (16GA.) LA335 (14GA.) UA115 UA225 LA335 (12GA.) UA133 UA143 LA333 BRC4 (16&14GA.) UA113 UA223 UA133 UA143 LA333 (12GA.) 1-1/2 x 1-3/4 x 6-1/4 (18ga.) LSFC6.25-R125 Framing 1-1/2 x 1-3/4 x 6-1/4 (16ga.) SFC6.25-R100 LS547 S547 B547 U547 X548 UA118 UA228 UA138 (16GA.) 1-1/2 x 1-3/4 x 4-1/4 (18ga.) LSFC4.25-R /2 x 1-3/4 x 4-1/4 (16ga.) SFC4.25-R175 LS545 S545 B545 U545 X545 UA115 UA225 UA135 BRC6 (16GA.) 7/8" x 1-3/4" x 2-1/4" (18ga.) LSFC2.25-R300 7/8" x 1-3/4" x 2-1/4" (16ga.) SFC2.25-R300 LS543 S543 B543 U543 X543 UA113 UA223 UA133 BRC3 1) Note that dimensions of x-reference parts will rarely be an exact match and that this could cause an issue with substituting one product for another. Gauges of x-reference parts may vary as well. 2) Because of the above notes, as well as other considerations, it is the responsibility of the Installer and Designer to de termine if the Simpson Connector is
3 SIMPSON STRONG-TIE RIGID CONNECTOR ANGLES **as of ** Nominal Size/Length/Notes Model No. ClarkDietrich 2"x2"x3" (14ga.) RCA223/68-R125 LS683, S683, U683, B683, X683 L2x2x , "x2"x3" (12ga.) RCA223/97-R90 LS973, S973, U973, B973, X973 L2x2x , "x2"x5" (14ga.) RCA225/68-R75 LS685, S685, U685, B685, X685 L2x2x , "x2"x5" (12ga.) RCA225/97-R55 LS975, S975, U975, B975, X975 L2x2x5-97 UA225-12, "x2"x7" (14ga.) RCA227/68-R55 LS687, S687, U687, B687, X687 L2x2x , Rigid Connector Angles 2"x2"x7" (12ga.) RCA227/97-R40 LS977, S977, U977, B977, X977 L2x2x , "x3"x3" (16ga.) RCA333/54-R100 LA543, A543 L3x3x3-54 LA "x3"x3" (14ga.) RCA333/68-R85 LA683, A683 L3x3x3-68 LA "x3"x3" (12ga.) RCA333/97-R60 LA973, A973 L3x3x3-97 LA "x3"x5" (16ga.) RCA335/54-R60 LA545 L3x3x5-54 LA "x3"x5" (14ga.) RCA335/68-R50 LA685 L3x3x5-68 LA "x3"x5" (12ga.) RCA335/97-R35 LA975 L3x3x5-97 LA Degree Utility 2-3/8"x1-3/8"x3" (16ga.) 2-3/8"x1-3/8"x5" (16ga.) 2-3/8"x1-3/8"x7" (16ga.) 2-3/8"x1-3/8"x9" (16ga.) L30 L50 L70 L90 LS543, S543, U543, B543, X543 LS545, S545, U545, B545, X545 LS547, S547, U547, B547, X547 LS549, S549, U549, B549, X549 L2x2x3-54 L2x2x5-54 L2x2x7-54 L2x2x , , UA , UA UA229-16, UA= Skewable Utility 2-1/4"x2-1/4"x4-7/8" (18ga.) S/LS50 N/A N/A N/A 2-1/4"x2-1/4"x6-3/8" (18ga.) S/LS70 N/A N/A N/A 1) Note that dimensions of x-reference parts may not be an exact match and that this could cause an issue with substituting one product for another. Gauges of x-reference parts may vary as well. 2) Because of the above notes, as well as other considerations, it is the responsibility of the Installer and Designer to determine if the Simpson Connector is
4 SIMPSON STRONG-TIE KNEE WALL CONNECTORS **as of ** Nominal Size/Length/Notes Model No. ClarkDietrich 2-1/4"x3-1/2"x3" (7ga.) RCKW3-R10 D683, D973, T683, T973 CL RCC /4"x3-1/2"x5-1/2"" (7ga.) RCKW5.5-R10 D685 D975 T685 T975 CL RCC /4"x3-1/2"x7-1/2" (7ga.) RCKW7.5-R10 N/A CL RCC800 Knee Wall Connectors 2-1/4"x1-1/2"x3" Stiffener for RCKW3 RCKW3S-R10 N/A CL (H) Plate HDW /4"x1-1/2"x5-1/2" Stiffener for RCKW5.5 and RCKW7.5 RCKW5.5S-R10 N/A CL (H) plate HDW5.25 HDW /8 " x 4" x 4-1/4" (12ga.) with 1/2" x 3" Bearing Plate MSSC4.25KW-KT20 D685 D975 T685 T975 CL RCC /8 " x 4" x 6-1/4" (12ga.) with 1/2" x 3" Bearing Plate MSSC6.25KW-KT20 CL RCC800 1) Note that dimensions of x-reference parts may not be an exact match and that this could cause an issue with substituting one product for another. Gauges of x-reference parts may vary as well. 2) Because of the above notes, as well as other considerations, it is the responsibility of the Installer and Designer to determine if the Simpson Connector is
5 SIMPSON STRONG-TIE HOLDOWNS/JOIST HANGERS **as of 1 Nominal Size/Length Model No. S/JCT Steel Joist Connector 8"-14" Joists S/HJCT-KT (with #14 screws) S/BA-Series Joist Hangers (14 ga. Non- Skewable) 8"-14" Joists (2" and 4" Seat Widths) S/BA2.12/8 S/BA2.12/10 S/BA2.12/12 S/BA2.12/14 S/BA4.18/8 S/BA4.18/10 S/BA4.18/12 S/BA4.18/14 7-7/8" S/HDU4 S/HDU Holdowns 10-3/8" S/HDU6 12-7/8" S/HDU9 16-5/8" S/HDU11 11" S/HD8S S/HDS - Holdowns (Screw Attached) 13-1/2" S/HD10S 17" S/HD15S 11" S/HD8B S/HDB - Holdowns (Bolt Attached) 13-1/2" S/HD10B 17" S/HD15B 7" S/DTT2Z Misc. Tension Ties 20" S/LTT /8" HTT4 16" HTT5 #14-14 Screws (Sold Separately for Holdowns) Pack of 100 Screws Box of 2500 Screws E1B1414R100 E1B1414B
Expanding Your Solutions
Expanding Your Solutions Clips and Connectors for Cold-Formed Steel Construction Effective 3/7/2017 Table of Contents Introduction... 1 Bypass Framing Slide-Clip Connectors SCB/MSCB... 2 SC... 3 IDBC...
More informationCLIPS & CONNECTORS. Phone:
CIPS & CONNECTORS 30 800.675.8023 CIPS & CONNECTORS 3 1 / 16 2 3 / 8 11 / 16 237 237 SOUND ISOTION CIP Description Furring Channel Sound Isolation Clip Resilmount 237 can be used in wall and ceiling applications
More informationSCB/MSCB Bypass Framing Slide-Clip Connector
Deflection Connectors Connectors for Cold-Formed Steel Construction SCB/MSCB Bypass Framing Slide-Clip Connector This product is preferable to similar connectors because of a) easier installation, b) higher
More informationTHE BEST PRODUCTS, QUALITY, AND CUSTOMER SERVICE.
PRODUCT CATALOG THE BEST PRODUCTS, QUALITY, AND CUSTOMER SERVICE. Our FrameRite Connectors Catalog details our line of high quality steel framing connectors. We know our customers depend on our quality
More informationConnectors for Cold-Formed Steel Curtain-Wall Construction
Introducing Connectors for Cold-Formed Steel Curtain-Wall Construction Code Listed: IAPMO ES ER-238 (800) 999-5099 www.strongtie.com Our Newest Product Line for Cold-Formed Steel Framing Simpson Strong
More informationConnectors for Cold-Formed Steel Curtain-Wall Construction
The expiration date of this document has been extended until 2/3/3. Introducing Connectors for Cold-Formed Steel Curtain-Wall Construction Code Listed: IAPMO ES ER-238 (800) 999-5099 www.strongtie.com
More informationCOLD-FORMED METAL FRAMING INSPECTION REPORT SUMMARY
COLD-FORMED METAL FRAMING INSPECTION REPORT SUMMARY Inspector: Section 05400 Name: Date: Company: Address: City: State: Zip code: Phone: Fax: E-mail: Project: Project Name: Location: Contractor: Phone:
More informationPRODUCT GUIDE. 2nd Edition February
PRODUCT GUIDE 2nd Edition February 2010 www.ki-lumber.com Item No. 125020 H-1 HURRICANE ANCHOR 125025 H-2.5A HURRICANE ANCHOR 125026 H-3 HURRICANE FRAMING ANCHOR 125029 H-8 HURRICANE FRAMING ANCHOR 125030
More informationSTANDARD MSGDET4AC: NOTES TO DESIGNER
GIRDER DETAILS (SHEET 1 OF 2) NOTES TO DESIGNER: Standard is to be used for trapezoidal or curved, 4-span continuous, steel plate girders. The standard includes girder details; tables for plate sizes,
More informationConnectors for Cold-Formed Steel Curtain-Wall Construction
Special Section Introducing Connectors for Cold-Formed Steel Curtain-Wall Construction Code Listed: IAPMO ES ER-238 (800) 999-5099 www.strongtie.com 240 Our Newest Product Line for Cold-Formed Steel Framing
More informationArchitectural Cable Railing Products
Architectural Cable Railing Products August 1, 2017 ISO Certified U.S.A. Manufacturer www.ultra-tec.com TABLE OF CONTENTS ULTRA-TEC RAILING PRODUCTS Cable Type and Size... 3 Options for How to Receive
More informationPLAN CEILING FRAMING PLAN CEILING JOIST SCHEDULE. Tenant Improvements. UNLV Police Station Maryland Parkway.
TYPICAL HEADER, SEE DETAIL 3/ 4 1 6 2 CEILING FRAMING PLAN SCALE: 3/16" = 1'-0" 2 2 4 600S162-43 FLAT BRACE, 4 CEILING JOIST, SEE SCHEDULE, BOXED BEAM: (2) 600S162-54 + (2)14GA TRACKS 2 CEILING JOIST SCHEDULE
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationRIDGE-JOIST CONNECTION 12/12 maximum slope
R1 RIDGE-JOIST CONNECTION Beveled bearing stiffener each side (see detail R8) 2 3 8" min. end nailing distance, typical United Steel Products LSTA24 or Simpson Strong-Tie LSTA24 strap with 7-10d x 1 1
More informationCPVC-10. CPVC Pipe Hangers Straps To Support Your Piping
CPVC-10 CPVC Pipe Hangers Straps To Support Your Piping CPVC Pipe Straps Cooper B-Line, Inc. is a leading manufacturer and fabricator of metal products used in the support of pipe and equipment for industrial,
More informationNORMAL WEIGHT CONCRETE TOTAL-LEWIS-DECK GYPSUM BOARD 2 OR 3-PLY COMPOSITE TOTALJOIST TOP CHORD CONNECTION
GENERAL DETAILS 100 TYPICAL FLOOR CONSTRUCTION NORMAL WEIGHT CONCRETE WELDED WIRE MESH FIBERGLASS BATT INSULATION (OPTIONAL) 18 GAUGE TIE WIRE 7/8" RESILIENT CHANNEL NOTE: CEILING MAY ALSO BE SUSPENDED
More informationHARDWARE MOUNTING HOLE BORING GUIDE FOR METAL RAILINGS
HARDWARE MOUNTING HOLE BORING GUIDE FOR METAL RAILINGS March 1, 2017 TABLE OF CONTENTS Through-the-Post Mounted Fittings Page Invisiware Receiver... 2-3 Invisiware Radius Ferrule... 4-6 Receiver with Push-Lock
More informationJOIST DETAILS Plate nail, 16d (0.15" x 1 ") at 1 on-center Blocking panel: 1 1 8" TJ Rim Board, 1 1 TimberStrand SL or TJI joist Toe nail, 10d (0.11" x ") at on-center A1 CS BEAM DETAILS L1 eb stiffener
More informationFitting instructions for (Read instructions fully, before installing the door)
t;t;i~iij~1~ti1i1f~~jhij~!~ti~~f~~t~il~t~11f;'~rj~*:i1;~i;~~g~1!~t4rf~?' ~~a~ Fitting instructions for (Read instructions fully, before installing the door) Horizontal tracked doors supplied with ' Retractable
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationCity of Los Angeles RR Values for Connectors in Shear Walls and Wall Anchorage Assemblies
for Connectors in Shear Walls and Wall Anchorage Assemblies The City of Los Angeles Building Code (LABC) has different requirements for holdowns used in shear wall applications than those used in wall
More informationMain Floor Revisions: 38' 0" Rm1 H3 50' 0" Bk1 B1 Rm2 B5 (26)-2 H2 B2 H3 (3)-3 B3 (11)-4 Bk1 B1 (5)-5 Rm4 Bk1 Rm3 Bk1 24' 0" 6' 0" 20' 0" START FRAMIN
Main Floor Revisions: 38' 0" Rm1 H3 50' 0" B1 Rm2 B5 (26)-2 H2 B2 H3 (3)-3 B3 (11)-4 B1 (5)-5 Rm4 Rm3 24' 0" 6' 0" 20' 0" START FRAMING HERE 18" BCI 90'S @ 16"OC Products PlotID Net Qty Product Length
More informationA-SL-1 A-SL-1 HAND RAIL STAIRS STRUCTURE/ ARCH SLIDE FOUNDATION 12" ROUND PIER 20" SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS
2X2 SQUARE TUBING /" WALL ON STRUCTURAL FRAME /8" WALL RAFTERS & INFILL NO. ISSUE HOUSE # GALVANIZED STEEL STAIRS SLIDE 2 GA SS POLISHED FINSHED LASER CUT FOUNDATION 2" ROUND PIER 20" SQUARE PIER CAP DRILL
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationPilot Holes for Manufacturing Purposes (Fastener not required) HDU U.S. Patent 6,112,495; 5,979,130. Vertical Wood Member Thickness.
HDU/DTT2Z Holdowns This product is preferab to similar connectors because of a) easier installation, b) higher loads, c) lower instald cost, or a combination of these features. HDU holdowns are pre-defcted
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationCONNECTOR SELECTION GUIDE
CONNECTOR SELECTION GUIDE FOR USE WITH PRODUCTS MANUFACTURED Y: This guide lists popular options for Simpson Strong-Tie hangers used with engineered wood products. Not all available hanger and installation
More informationOffering a full range of anchoring and tie down systems including:
Offering a full range of anchoring and tie down systems including: BE SURE TO CONSULT LOCAL REGULATORS FOR CODE QUESTIONS AND THE MANUFACTURERS INSTALLATION MANUAL FOR PROPER MATERIALS. Anchors Pan Systems
More informationF I X I N G B R O C H U R E
F I X I N G B R O C H U R E Joist Hangers Joist Hangers on Steel Beams Fixing Masonry Hangers Speedy Joist Hangers Lateral Restraint Straps Roof Tie Down Straps Herring Bone Joist Strut Bat 'U' Nail Plate
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-2608 Reissued January 2016 This report is subject to renewal January 2017. A Subsidiary of the International Code Council DIVISION:
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationShearwall System Installation Guide
Shearwall System Installation Guide Complete HFX product listing with dimensions, weights, connectors, typical installations and accessories. Also includes Hardy Frame Moment Frame information. Easy as
More informationICC-ES Evaluation Report Reissued March 1, 2011 This report is subject to renewal in two years.
ICC-ES Evaluation Report www.icc-es.org (800) -6587 (56) 699-05 ESR-0 Reissued March, 0 This report is subject to renewal in two years. A Subsidiary of the International Code Council DIVISION: 06 00 00
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationBig & Tall Executive Chair Assembly Instructions
Designed to be comfortable, and built to stay that way. Big & Tall Executive Chair Assembly Instructions 400 lbs Model 50106E PARTS A B C D Casters Quantity: 5 Star Base Quantity:1 Gas Lift Quantity: 1
More informationTOLL FREE:(888) FAX:(941) ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL
ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL The ProTEC panels are manufactured with grooves on all four sides to accept the steel components. This grooving applies to the regular panel whose
More informationSAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the North Dakota with pocket doors. Building Size 12'x12' or 12'x16' Revised August 30, 2011
Best Barns USA Assembly Book Revised August 30, 2011 SAMPLE INSTRUCTIONS the North Dakota with pocket doors Building Size 12'x12' or 12'x16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington
More informationTechline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
More informationDesigned for Building Designed for Living
decorative hardware Designed for Building Designed for iving (800) 999-5099 strongtie.com Add Beauty and Strength to Your Custom Outdoor iving Structures ith Outdoor Accents, a line of decorative wood
More informationLS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
More informationCONNECTOR SELECTION GUIDE
CONNECTOR SELECTION GUIDE Residential Construction FOR USE WITH PRODUCTS MANUFACTURED Y: This guide lists popular options for Simpson Strong-Tie hangers used with engineered wood products. Not all available
More informationDeck Designer Specification Kit For AZEK. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For AZEK All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2 Permit
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationCONNECTOR SELECTION GUIDE
CONNECTOR SELECTION GUIDE FOR USE WITH PRODUCTS MANUFACTURED Y: This guide lists popular options for Simpson Strong-Tie hangers used with engineered wood products. Not all available hanger and installation
More informationhyjoist Options Range Installation Guide
hyjoist Options Range Installation Guide For on-site, technical and product support, including assistance in sizing freecall 1800 808 131 hyjoist Guide for Installation hyjoist is a cost effective, lightweight
More information(800) (562) A Subsidiary of the International Code Council
ICC-ES Evaluation Report ESR-65 Issued October, 009 This report is subject to re-examination in two years. www.icc-es.org (800) -6587 (56) 699-05 A Subsidiary of the International Code Council DIVISION:
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More information10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS
10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 WOOD SKID FLOOR FLOOR SYSTEM FOR 10x12 TRICO AND FLORA SHEDS RAW MATERIALS LIST: 2 (9) FLOOR FRAMING AND SHEATHING: 1) BAND BOARD 2 x 6 x 12 PRESSURE
More informationDeck Designer Specification Kit For AZEK. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For AZEK All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2 Permit
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationBARBARMS. IMPORT 2x1 5/8x45 degrees 2 3/8x1 5/8x45 degrees
BARBARMS IMPORT 2x1 5/8x45 degrees 2 3/8x1 5/8x45 degrees DOMESTIC Senior H Beam 1 5/8x1 5/8x45degrees Arm S-Slot 2x1 5/8x45 degrees Arm S-Slot 2 3/8x 1 5/8 45 degree Arm S-Slot 1 5/8x1 5/8 Vertical Arm
More informationTable of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or Northwest Tillers today
Table of Contents Section H Section H : Gauge Wheels & Mesh Roller 6½ Gauge Wheel (SRB4098)... H1 9½ Gauge Wheel (SRB4099)... H2 6½ & 9½ Gauge Wheel Hubs... H3 Heavy Duty Gauge Wheel (SRB4070 & SRB4076)...
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised February 4, 2016 the Millcreek-R 12'x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationHandcrafted Excellence TIMBER FRAME HOMES
Handcrafted Excellence TIMBER FRAME HOMES Craftsmanship Just like the masters of old, true perfection comes not through machines and automation but through sweat and toil of human hands, spurred onward
More informationAPPLICATION FOR A BUILDING PERMIT
APPLICATION FOR A BUILDING PERMIT City of San Jacinto 595 S. San Jacinto Ave San Jacinto CA 92583 95.487.7330 fax 95.654.9896 Must print legibly, submit (3) sets of building and plot plans. Fill out all
More informationAssembly Book. Northwood Deluxe. 14'x10' Revised on August 28, 2015
Assembly Book Revised on August 28, 2015 Northwood Deluxe 14'x10' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted. Under
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised February 4, 2016 the Millcreek-R 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationBest Barns USA. the Danbury - R 8' x 12' Assembly Book. Revised September 30, 2016
Best Barns USA Assembly Book Revised September 30, 2016 the Danbury - R 8' x 12' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationDeck Designer Specification Kit For AZEK. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For AZEK All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2 Permit
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationAssembly Book. Northwood Deluxe. 10'x10' Revised on May 20, 2014
Assembly Book Revised on May 20, 2014 Northwood Deluxe 10'x10' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted. Under the
More informationCHROME 5MM HANGING PEG
Pull-Down Closet Rod s Allows Convenient Access To Clothing At Any Height Available In 3 Sizes Each Size Is Adjustable In Width 44 Lb. Weight Rating FINISH / SIZE 43-344 450-600 (17 3 /4-23 5 /8 ) 43-346
More informationStrong, lightweight composite structural I -Beam.
Strong, lightweight composite structural I -Beam. This Installation Guide has been prepared as a source of information to provide general guidance to consultants and in no way replaces the services of
More informationProduct design: Structural systems
Product design: Structural systems Tension and compression The arch bridge and the aerial ropeway in the panels below were designed to resist specific loads and forces. The arch has to resist the load
More informationVERSA-LAM BCI INSTALLATION GUIDE LIMIT STATES DESIGN CANADA
INSTALLATION GUIDE VERSA-LAM BCI LIMIT STATES DESIGN CANADA The information in this document pertains use in the CANADA ONLY, Limit States Design. Refer the appropriate Specifier Guide US for use in the
More informationfax
310-324-7622 fax 310-324-7644 Founded in 1998, Commercial Scaffolding Sales, Inc. (CSSI) has quickly established itself as the premier source of scaffold products for North American markets. CSSI carries
More informationSYNTHEON ACCEL-E INSTALLATION MANUAL
Installation Guide SYNTHEON ACCEL-E INSTALLATION MANUAL Table of Contents View this entire installation manual online at www.syntheoninc.com/accel-e GENERAL INFORMATION... 2-11 Introduction...2 ACCEL-E
More informationWood Connections. Concepts of Well Designed Connections
Wood Connections Sam Hensen, P.E. Branch Engineering Manager Concepts of Well Designed Connections Must provide sufficient capacity to transfer loads to supporting members Utilize fastener spacing which
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised October 11, 2018 the Woodville 10' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted. Under
More informationPANEL NOTATION (3) D4 D3 D2 D3X2 SHEATHING THICKNESS (IN.) D " NAILS/ SPACING " o.c. SILL BOLT SPACING 1 2 " 36" O.C. 1 2 " Ø
PANEL NOTATION (3) D2 X2 SHEATHING THICKNESS (IN.) 32 " NAILS/ SPACING 32 " 8d @3" o.c. SILL BOLT SPACING 2 " Ø @ 36" O.C. 2 " Ø @ 2" O.C. 2 " Ø @ O.C. 2 " Ø @ 6" O.C. 2 " Ø @ '-0" O.C. 980 PLF D2X2 32
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationLateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationAttach Trusses and Rafters Faster
Attach Trusses and Rafters Faster SDWC TRUSS Screw Truss-to-Plate Connections For Truss-to-Plate Connections The Strong-Drive SDWC TRUSS screw provides a truss- and rafter-to-top-plate connection. The
More informationNails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
More informationWood I-Joists by Curtis Eck, P.E.
Roof Framing with Wood I-Joists by Curtis Eck, P.E. I-joists make for a strong, flat roof, but you have to pay attention to the connections at the ridge and eaves W hile many builders have incorporated
More informationInstallation & Assembly: Suspended Ceiling Kit
Installation & ssembly: Suspended Ceiling Kit Model: CMJ450 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500
More informationIntroducing AJSTM INSTALLATION GUIDE USA. 8 th Edition USA
The SIMPLE FRAMING SYSTEMSM INSTALLATION GUIDE USA for Floors This Installation Guide is intended to provide general information for the designer and end-user. For further information, please refer to
More informationVERSA-LAM. An Introduction to VERSA-LAM Products
44 VERSA-LAM An Introduction to VERSA-LAM Products VERSA-LAM is one of the strongest and stiffest engineered wood products approved in the UK. 241 302 356 406 VERSA-LAM products are excellent as floor
More informationDeck Designer Specification Kit For AZEK. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For AZEK All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2 Permit
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationVolunteer Guide - FLASH Cards Mitigation for High Wind Events Wood Construction Connectors Card Reference
Volunteer Guide - FLASH Cards Mitigation for High Wind Events Wood Construction Connectors Card Reference Developed by the Federal Alliance for Safe Homes (FLASH) 1427 E. Piedmont Dr., Suite 2, Tallahassee,
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 12, 2017 the Denver 12' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted. Under the
More informationMEADOWVALE II PLAY SYSTEM F24035
MEADOWVALE II PLAY SYSTEM F24035 INSTALLATION AND OPERATING INSTRUCTIONS 14 5 (4.4 m) 24 10 / 7.9m 12 10 / 3.9m 18 8 (5.7 m) 10 6 / 3.2m 28 / 8.5m WARNING To reduce the risk of serious injury or death,
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3096 Reissued 01/2017 This report is subject to renewal 01/2018. DIVISION: 06 00 00 WOOD, PLASTICS
More informationEWP Product Guide. For Use With Products Manufactured by. TJI 110, 210, 230, 360, & 560 Joists.
EWP Product Guide www.connectors.com For Use With Products Manufactured by SKH2324R-2 LSSH179 THF17925 THO17118 TJI 110, 210, 230, 360, & 560 s supplies quality products to build Stronger Safer Structures
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More information(TOLL FREE); 7am 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ATTACHED GARDEN PERGOLA WITH LEDGER BOARD
866.332.2403 (TOLL FREE); 7am 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ATTACHED GARDEN PERGOLA WITH LEDGER BOARD Note will vary Description Posts Single Supports Supports with In-Between
More informationAssembly instructions for EZ Hang Deluxe
Assembly instructions for EZ Hang Deluxe EZ Hang Chairs is pleased that you have chosen our EZ Hang Deluxe. While utmost care is taken in the choice of materials and the highest standards are used in manufacturing,
More informationMidwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised December 6, 2013 the Denver-R 12' x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More information