2 kwh/1000h. 874/2012/EU Regulation download energy labels
|
|
- Benjamin Benson
- 5 years ago
- Views:
Transcription
1 kwh/1000h 874/2012/EU Regulation download energy labels
2 1 emphasized At the Rábalux website please choose the or normal link.
3 Label maker program Label with article number Set up of the parameters The current language of the website Choose, that you would like to make blank labels or labels with article number. Choose the language of the required label. Choose, that you would like to have the labels in PDF or in JPG format. Choose, that you would like to have a landscape or a portrait, where the hole is signed, and we also marked a sign for the hole on the graphic. Choose, that you would like to put the labels to a A4 page, or single. Write the reguired article numbers. Click on Download button.
4 1 2 3 A ZIP file will be generated, which you can find the required labels with article numbers no_data.txt: L_1600_rabalux...pdf: files started with a letter L : subject to labels for lamp fittings LS_1600_rabalux...pdf: files started with a letter LS : subject to labels for lightsources If you find any article number in the no_data.txt file, please check, that you wrote correctly the required article number to the box. If yes, you can choose to the required article number a blank label here.
5 Label maker program Blank label Set up of the parameters Give the number of quantity of the required printed labels. If you pull the mouse over the subtype of the blank labels, you can see the preview of it. Choose the language of the required label. Choose, that you would like to have the labels in PDF or in JPG format. Choose, that you would like to have a landscape or a portrait, where the hole is signed, and we marked a sign for the hole on the graphic. Choose, that you would like to put the labels to a A4 page, or single. Click on the Download button. A ZIP file will be generated, which you can find the required blank labels with the required quantities in.
6 Which subtype of blank labels tag to the lamp fitting 4in question? 1.1./ The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. The luminaire has no added lightsource. 1.2./ The luminaire can only be used with energy-efficient bulbs. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. The luminaire has no added lightsource.
7 2.1./ The luminaire contains built-in LED lamps. The LED lamps can not be changed in the luminaire. The luminaire contains built-in LED lamps. The LED lamps cannot be changed. There is no other added lightsource. 3.1./ sold with a The luminaire contains built-in LED lamps. The LED lamps cannot be changed. The luminaire contains a socket for other replaceable bulbs. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. This socket can be used with a bulb of any energy class. The luminaire is sold with a replaceable C.
8 The luminaire contains built-in LED lamps and has sockets for bulbs of the energy 3.2./ The LED lamps can not be changed in the luminaire. The luminaire contains built-in LED lamps. The LED lamps cannot be changed. The luminaire contains a socket for other replaceable bulbs. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. This socket can be used with a bulb of any energy class. 4.1./ sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. sold with a replaceable A.
9 4.2./ sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): 14, E27, G9, G4, any fluorescent. sold with a replaceable C. 4.3./ sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. sold with a replaceable E.
10 4.4./ sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. sold with a replaceable A / sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. sold with a replaceable B.
11 4.6./ sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. sold with a replaceable D. 4.7./ sold with a The luminaire can be used with any energy-efficient bulb. Specific types of socket (the list is not complete): E14, E27, G9, G4, any fluorescent. sold with a replaceable A++.
12 4.8./ sold with a The luminaire can only be used with energy-efficient bulbs of energy classes C, D, E Specific types of socket (the list is not complete): R7s. sold with a replaceable C. 4.9./ sold with a The packaging of the luminaire contains the reflector bulb. sold with a B.
13 4.10./ sold with a The packaging of the luminaire contains the reflector bulb. sold with a C / sold with a The packaging of the luminaire contains the reflector bulb. sold with a D.
14 4.12./ sold with a The packaging of the luminaire contains the reflector bulb. sold with a E / sold with a The packaging of the luminaire contains the reflector bulb. sold with a A.
15 4.14./ sold with a The luminaire can be used only with light source of the energy class B, the energy class of the supplied light source is B / ble with sold with a compatible with A++, A+, A. sold with a bulb of the energy class: A+.
16 4.16./ ble with sold with a compatible with A++, A+, A, B. sold with a bulb of the energy class: A++.
17 5Tips The sizes of the labels using to the lamp fittings: 50x100mm (the 50x100mm round sticker line is not shown in the graphic located along the blue frame). The sizes of the labels using to the lightsources: 36x75mm (the 36x75mm round sticker line is not shown in the graphic located along the blue frame). At printing house you have to say in any ways the correct sizes of the label. Inside the graphic of the label any hole or other content different from the Regulation can t be shown. For printing we advise the PDF format. We advise you for own printing and the placement the labels to the lamps Format: PDF Implementation: - Portrait, hole signed - A4 In this case we drawn the label with a pale frame, marked the place of the cutting and the possibility of hole. That s why the size of this label is by the lamp fittings 50x120 mm and by the lightsources 36x75 mm.
Chapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationlightstudio light box to illuminate a scene with different standardized light types
light box to illuminate a scene with different standardized light types Image Engineering GmbH & Co. KG. Augustinusstraße 9d. 50226 Frechen. Germany T +49 2234 995595 0. F +49 2234 995595 10. www.image-engineering.de
More informationDOWNLOAD OR READ : WRITING PAPER WITH LINES FOR KINDERGARTEN PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : WRITING PAPER WITH LINES FOR KINDERGARTEN PDF EBOOK EPUB MOBI Page 1 Page 2 writing paper with lines for kindergarten writing paper with lines pdf writing paper with lines for kindergarten
More informationPUZZLE EFFECTS 3D User guide JIGSAW PUZZLES 3D. Photoshop CC actions. User Guide
JIGSAW PUZZLES 3D Photoshop CC actions User Guide CONTENTS 1. THE BASICS...1 1.1. About the actions... 1 1.2. How the actions are organized... 1 1.3. The Classic effects (examples)... 3 1.4. The Special
More informationDESIGNING AND PRINTING POSTERS AT GIOS INFORMATICS LAB. Cindy D. Zisner Technology Support Analyst
DESIGNING AND PRINTING POSTERS AT GIOS INFORMATICS LAB Cindy D. Zisner Technology Support Analyst Today, posters are much easier to create and print with the use of computers and large-format printers.
More informationCM 352 Electrical Construction Estimating
CM 352 Electrical Construction Estimating Accubid Activity #2 Building Fixture Designations and Fixture Takeoff SYS 06 FIXTURES Building Fixture Designations 1. Start the program Accubid Pro 12 [Start,
More informationPage 21 GRAPHING OBJECTIVES:
Page 21 GRAPHING OBJECTIVES: 1. To learn how to present data in graphical form manually (paper-and-pencil) and using computer software. 2. To learn how to interpret graphical data by, a. determining the
More informationOutput a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout.
Printing Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout. Originally, people printed text from printers and plotted drawings from plotters.
More informationHow to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
More informationG e t t i n g S t a r t e d G u i d e. ID Card Managers. Getting Started Guide. 1 P a g e
G e t t i n g S t a r t e d G u i d e ID Card Managers Getting Started Guide 1 P a g e G e t t i n g S t a r t e d G u i d e P a g e 2 Contents ID Cards: Getting Started... 3 Why manage photo ID Cards
More informationCustomer Info on EuP Directive for Domestic Lighting. Havells Sylvania February 2009
Customer Info on EuP Directive for Domestic Lighting Havells Sylvania February 2009 Contents What is the new directive? Phase Out Schedule Incandescent Phase Out Schedule Halogen Direct Replacements by
More informationLearning to Use a Light Probe
Learning to Use a Light Probe Computer 31 Is it sunny outside or cloudy? Are the lights on in your room? How bright is it where you are sitting? Is it brighter if you are close to a light bulb or next
More informationBASIC T5 Short Emergency Lighting
osram.com BASIC T5 Short Emergency Lighting Versatile solutions for emergency lighting applications Basic T5 EL Basic T5 EL QT-ECO TECHNICAL INFORMATION 01 Benefits Suitable for emergency power operation
More informationScanner Parts. Scanner Specifications. General. Mechanical. Epson Perfection V200 Photo. P Power/ ] Start button Status light. { Copy button.
Scanner Parts { Copy button Scan to E-mail button a b P Power/ ] Start button Status light c e d a Scan to PDF button Film holder Scanner Specifications General Scanner type Flatbed color Photoelectric
More informationPUZZLE EFFECTS 3D User guide PUZZLE EFFECTS 3D. Photoshop actions. For PS CC and CS6 Extended. User Guide
PUZZLE EFFECTS 3D Photoshop actions For PS CC and CS6 Extended User Guide CONTENTS 1. THE BASICS... 1 1.1. About the actions... 1 1.2. How the actions are organized... 1 1.3. The Classic effects (examples)...
More informationWahl HSI3000 Series Imager Report Writer Software
Wahl HSI3000 Series Imager Report Writer Software User Manual WD1024 Rev A 04/18/08 Palmer Wahl Instrumentation Group 234 Old Weaverville Road Asheville, NC 28804 Phone: (828) 658-3131 Fax: (828) 658-0728
More informationCHAPTER 18 DOCUMENT IMAGING MODULE 18.0 OVERVIEW 18.1 REQUIREMENTS AND INSTALLATION Special Requirements Mapping Network Drive
EXTENDED SERVICE OPTIONS CHAPTER 18 18.0 OVERVIEW Collection agencies frequently require the ability to save documents related to collection efforts. For example, agencies doing commercial collections
More informationPRODUCT FAMILY DATASHEET Vintage 1906 LED
Vintage 1906 LED LED lamps, vintage edition AREAS OF APPLICATION Domestic applications General illumination Outdoor applications only in suitable luminaires Perfect for decorative installations PRODUCT
More informationPRODUCT FAMILY DATASHEET Vintage 1906 LED
Vintage 1906 LED LED lamps, vintage edition AREAS OF APPLICATION Domestic applications General illumination Outdoor applications only in suitable luminaires Perfect for decorative installations PRODUCT
More informationDeck Tutorial. Chapter 6: Decks and Porches
Chapter 6: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to
More informationDeck Tutorial. Chapter 8: Decks and Porches
Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationGetting Started in Eagle Professional Schematic Software. Tyler Borysiak Team 9 Manager
Getting Started in Eagle 7.3.0 Professional Schematic Software Tyler Borysiak Team 9 Manager 1 Executive Summary PCBs, or Printed Circuit Boards, are all around us. Almost every single piece of electrical
More informationBossDim RS. User manual - UK
BossDim RS User manual - UK Congratulations on acquiring your new BossDim RS We are happy you have chosen our product to control your home lighting, and we hope it gives you hours of pleasure. On the following
More informationThe Joy of SVGs CUT ABOVE. pre training series 2. svg design Course. Jennifer Maker. CUT ABOVE SVG Design Course by Jennifer Maker
CUT ABOVE svg design Course pre training series 2 The Joy of SVGs by award-winning graphic designer and bestselling author Jennifer Maker Copyright Jennifer Maker page 1 please Do not copy or share Session
More informationThere are two types of cove light in terms of light distribution inside a room
DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation
More informationSETTING UP YOUR PAGE LAYOUT:
In this workshop we will look at: Setting up your drawing sheet Viewports Printing your work Once you ve drawn your work in the Model space and you re ready to print, you need to set up your Drawing Sheet
More informationAreaSketch Pro Overview for ClickForms Users
AreaSketch Pro Overview for ClickForms Users Designed for Real Property Specialist Designed specifically for field professionals required to draw an accurate sketch and calculate the area and perimeter
More informationAsk Jo: Quilt Designing on the Computer
Ask Jo: Quilt Designing on the Computer If you are new to the blog, welcome. You have reached an archived free pattern. We typically put up new blog post twice daily so there is always something new and
More informationPRODUCT FAMILY DATASHEET PARATHOM Retrofit CLASSIC A
PARATHOM Retrofit CLASSIC A LED lamps, classic bulb shape AREAS OF APPLICATION Perfect for decorative installations Domestic applications General illumination Outdoor applications only in suitable luminaires
More informationQuilt-Pro 6. Creating a Panel Quilt
QP6 Lessons posted Page 1 Creating a Panel Quilt Quilt-Pro 6 I have seen some really beautiful fabric panels that would look absolutely gorgeous in a quilt. Panel quilts can be made quickly or can be as
More informationBanner. Double Banner
Banner Dimension: Mobile: 640 (W) x 100 (H) Tablet Portrait - 1536 (W) x 180 (H) [For mytv only] Tablet Landscape - 2048 (W) x 180 (H) [For mytv only] File format/ size: Must provide (.gif or.jpg) still
More informationPRODUCT FAMILY DATASHEET LED Retrofit CLASSIC P
LED Retrofit CLASSIC P LED lamps, classic mini-ball shape AREAS OF APPLICATION Perfect for decorative installations General illumination Outdoor applications only in suitable luminaires Domestic applications
More informationLED Gas Station Light Installation Guide
Product Applications: WISDOM LED Gas Station Lighting series can be widely used in indoor or outdoor lighting NOTE: New refers to mounting to a new/ replaced canopy skin. Definition: Replacement refers
More informationUser Manual. This User Manual will guide you through the steps to set up your Spike and take measurements.
User Manual (of Spike ios version 1.14.6 and Android version 1.7.2) This User Manual will guide you through the steps to set up your Spike and take measurements. 1 Mounting Your Spike 5 2 Installing the
More informationThe Intuitive Web-Based Wi-Fi Planning Tool
0 ezwifi Planner The Intuitive Web-Based Wi-Fi Planning Tool User Manual V 1.0 Overview Tools to simulate wireless deployment with EnGenius wireless products. Upload floor plan & set up environment parameters
More informationArchicad Layout of Drawings
Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings
More informationAnsoft Designer Tutorial ECE 584 October, 2004
Ansoft Designer Tutorial ECE 584 October, 2004 This tutorial will serve as an introduction to the Ansoft Designer Microwave CAD package by stepping through a simple design problem. Please note that there
More informationPARATHOM Retrofit CLASSIC A DIM
PARATHOM Retrofit CLASSIC A DIM Dimmable LED lamps, classic bulb shape Areas of application _ Perfect for decorative installations _ Domestic applications _ General illumination _ Outdoor applications
More informationDeck Tutorial. Chapter 8: Decks and Porches
Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase.
More informationUniversity Libraries ScanPro 3000 Microfilm Scanner
University Libraries ScanPro 3000 Microfilm Scanner Help Guide Table of Contents Getting Started 3 Loading the Film 4-5 Viewing Your Film 6-7 Motorized Roll Film Control 6 Crop Box 7 Using the Toolbar
More informationExcel 2003: Discos. 1. Open Excel. 2. Create Choose a new worksheet and save the file to your area calling it: Disco.xls
Excel 2003: Discos 1. Open Excel 2. Create Choose a new worksheet and save the file to your area calling it: Disco.xls 3. Enter the following data into your spreadsheet: 4. Make the headings bold. Centre
More informationCamera Modes Worksheet
Tools and Program Needed: Digital C. Computer USB Drive Bridge PhotoShop Camera Modes Worksheet Targets 1. Students will create images demonstrating an understanding of Auto Scene Modes and Creative Zone
More informationLUMILUX T8. Product family datasheet. Tubular fluorescent lamps 26 mm, with G13 bases
LUMILUX T8 Tubular fluorescent lamps 26 mm, with G13 bases Areas of application _ Public buildings _ Office lighting _ Industry _ Shops _ Supermarkets and department stores _ Street lighting _ Outdoor
More informationThis pack contains: Invitations 5x7 2 Party Circles (Cupcake Toppers) Mini Candy/Choc Wrappers Thank You Hang Tags
PALE BLUE MINI PACK Thank you for downloading my Pale Blue Mini Pack! This pack contains: Invitations 5x7 2 Party Circles (Cupcake Toppers) Cupcake Wrappers Water Bottle Wrappers Mini Candy/Choc Wrappers
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationIRISYS ISI Series Imager Report Writing Software
IRISYS ISI 4604 4000 Series Imager Report Writing Software User Manual InfraRed Integrated Systems Ltd Park Circle, Tithe Barn Way Swan Valley Northampton NN4 9BG Tel: (0) 1604 594200 Fax: (0) 1604 594210
More informationLesson 16 Helical Sweeps and Annotations
Lesson 16 Helical Sweeps and Annotations Figure 16.1 Helical Compression Spring Drawing OBJECTIVES Create a helical compression spring with a Helical Sweep Use sweeps to create hooks on extension springs
More informationAnchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
More informationLED GROW LIGHT-BYZ SERIES
This series of LED grow light will cultivate record-breaking yields, both on quantity and quality, with greater energy savings, and efficiency than any other grow lights. FEATURES Tripe types of on/off
More informationInstruction Manual. Ultrasonic and Radar
Instruction Manual ABM Gateway Software for 3 & 4 wire Ultrasonic and Radar Instruction Manual Revision 5.8 NOTE: Windows 7 and 8 users are asked to use default screen size (100%). To change from Larger
More informationImpress Guide Chapter 4 Adding and Formatting Pictures
Impress Guide Chapter 4 Adding and Formatting Pictures This PDF is designed to be read onscreen, two pages at a time. If you want to print a copy, your PDF viewer should have an option for printing two
More informationRevision. FRDS Simulator Quick Start Tutorial
Document# Revision Revised 9001-00XX FRDS Simulator Quick Start Tutorial D 2/15/2015 by DC FRDS Simulator Quick Start Tutorial The purpose of this tutorial is to demonstrate they key features of the simulator
More informationJ. La Favre Fusion 360 Lesson 2 April 19, 2017
In this lesson, you will create a round plate with 12 counter-bored holes to fit 6-32 socket head screws. A counter-bored hole has two diameters, one to fit the threaded part of the screw and the other
More informationProduct family datasheet PARATHOM LED PIN G4 12 V
PARATHOM LED PIN G4 12 V Low-voltage 12 V LED lamps with retrofit pin base G4 Areas of application _ Atmospheric accent lighting throughout the home _ Shops, hotels and restaurants _ Foyers, offices _
More informationFLOS Web Configurator GUIDE FOR LIGHT STRUCTURES
FLOS Web Configurator GUIDE FOR LIGHT STRUCTURES To make your project, please follow the steps below. Please, first open your internet browser and access to the address: http://configurator.flosarchitectural.net
More informationArchicad Layout of Drawings
Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings
More informationGetting started 1 System Requirements... 1 Software Installation... 2 Hardware Installation... 2 System Limitations and Tips on Scanning...
Contents Getting started 1 System Requirements......................... 1 Software Installation......................... 2 Hardware Installation........................ 2 System Limitations and Tips on
More informationEVERYTHING YOU NEED TO KNOW ABOUT LIGHTING AND THE STUDIO BY LUCY BARTLETT
EVERYTHING YOU NEED TO KNOW ABOUT LIGHTING AND THE STUDIO BY LUCY BARTLETT www.lucybartlettphotography.wordpress.com www.flickr.com/photos/lucybartlett bartletl@uni.coventry.ac.uk www.cuphotography.org
More informationAttaching & detaching
The Attach tool has two functions. Attach holds your cuts in position so that images on the cutting mat will appear exactly as they show up on the design canvas. Attach can also fasten a write or score
More informationQuick Start Training Guide
Quick Start Training Guide To begin, double-click the VisualTour icon on your Desktop. If you are using the software for the first time you will need to register. If you didn t receive your registration
More informationFibaro System Modules
Chapter 3 Fibaro System Modules 3.1 Fibaro Dimmer FGD211 Figure 3.1: Dimmer module, FGD-211 Radio controlled light dimming module, designed to work with light sources of any type. May be connected to two-wire
More informationThis guide will show you how to make multiple MP3 tracks from one long recording from a cassette or record player.
Getting Started with Audacity Audacity is a popular audio editing software free to download For a full instruction manual or to get help, go to http://manual.audacityteam.org/ Before you begin This guide
More informationCOPYRIGHT NATIONAL DESIGN ACADEMY
National Design Academy How 2 Guide Use SketchUp with LayOut COPYRIGHT NATIONAL DESIGN ACADEMY Use SketchUp with LayOut In order to be able to produce accurate scale drawings in SketchUp, you must use
More informationby Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual SAMPLE
kramdnal by Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual Table of Contents Introduction... iii Project 1: Landscape Area Analysis...1 Project 2: Quick Domestic
More informationminicad5 QuickStart Tutorial Stage: 4 Plot the Job
minicad5 QuickStart Tutorial Stage: 4 Plot the Job Aim: Plot the job to both printer / plotter and DXF file. Figure 1 - The finished product Plotting and export to DXF We wish to produce a final paper
More informationDIGITAL PHOTOGRAPHY CAMERA MANUAL
DIGITAL PHOTOGRAPHY CAMERA MANUAL TABLE OF CONTENTS KNOW YOUR CAMERA...1 SETTINGS SHUTTER SPEED...2 WHITE BALANCE...3 ISO SPEED...4 APERTURE...5 DEPTH OF FIELD...6 WORKING WITH LIGHT CAMERA SETUP...7 LIGHTING
More informationPAPER SLEEVES & CARRIERS CATALOG
PAPER SLEEVES & CARRIERS CATALOG Custom Printed Card Sleeve (Ref #SC) Card fits nicely into these sleeves for presentation. Stock: 24# white woven Colors: Prints 1/0 to 4/0 - Unfolded: 4 (w) x 5 (h) -
More informationLabel Studio Quick Start Guide
Label Studio Quick Start Guide Overview The goal of the LabelStudio program is to help you layout and manage bulk jobs containing a mix of different logos, that all require a specified quanity. LabelStudio
More informationCHM 152 Lab 1: Plotting with Excel updated: May 2011
CHM 152 Lab 1: Plotting with Excel updated: May 2011 Introduction In this course, many of our labs will involve plotting data. While many students are nerds already quite proficient at using Excel to plot
More informationisel=vakuum UV exposure device
isel=vakuum UV exposure device Manual I isel-vakuum UV exposure device About these instructions In this instructions, you find different symbols marking important information for easy and fast reference.
More informationZeiss Axio Imager.A1 manual
Zeiss Axio Imager.A1 manual Power-up protocol 1. Mercury lamp 2. Power strip on shelf 3. Computer The Mercury lamp should always be first-on and last-off. This prevents any electrical surges caused by
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More informationCaenotec Prof. Ralf Schnabel
Caenotec Prof. Ralf Schnabel Kleine Dorfstr. 9 38312 Börßum, Ph: 0049 151 11653356 r.schnabel@tu-bs.de Mehr braucht man nicht A simple and convenient program to document microscope pictures by Christian
More informationAssembly Guide for Printrbot - Simple Maker s Edition 1405
Assembly Guide for Printrbot - Simple Maker s Edition 1405 Last update: March 2016 Please Note: be careful on the steps that are underlined 1 Contents Tools Needed:... 3 First step: Check components and
More informationWith Boxoft Photo Magic Maker, just by simple mouse clicking, you can add dream effects:
Note: This product is distributed on a try-before-you-buy basis. All features described in this documentation are enabled. The registered version does not time limit. About Boxoft Photo Magic Maker Boxoft
More information3D Scanning with Artec Studio 11 Professional
Digital Media Tutorial Witten by Dan Staffieri 3D Scanning with Artec Studio 11 Professional 1) Open Artec Studio 11 Professional 2) Press the Preview button or press the Artec scanner s toggle switch
More informationEstimated Time Required to Complete: 45 minutes
Estimated Time Required to Complete: 45 minutes This is the first in a series of incremental skill building exercises which explore sheet metal punch ifeatures. Subsequent exercises will address: placing
More informationShare My Design Space Project to Facebook or Pinterest?
How Do I Share My Design Space Project to Facebook or Pinterest? We love it when our members share the projects they create daily with their Cricut machines, materials, and accessories. Design Space was
More informationNEORSD. Cad Standards and Procedures Manual
NEORSD Cad Standards and Procedures Manual This Manual is being provided to you on loan from the NEOSRD and is the property of the NEOSRD. Periodic updates will be provided and you are responsible for
More informationNotification System Installation Guide
Notification System Installation Guide NOTE: It is strongly recommend that you hire a licensed electrician to perform the installation of this product. Materials Provided 1. Directory Sign (1) a. Directory
More informationIn the Heat of the Light
The Electromagnetic Spectrum Laboratory Investigation TEACHER NOTES In the Heat of the Light Key Concept Fluorescent and incandescent lights work in different ways. Skills Focus observing, measuring, interpreting
More informationDigital Projection Entry Instructions
The image must be a jpg file. Raw, Photoshop PSD, Tiff, bmp and all other file types cannot be used. There are file size limitations for competition. 1) The Height dimension can be no more than 1080 pixels.
More informationScribble Maps Tutorial
Scribble Maps Tutorial Go to the homepage of Scribble Maps here: h t t p : / / w w w. s c r i b b l e m a p s. c o m / Getting to know the Interface Scribble Maps is a free online mapping application with
More informationSuccessfully Navigating Family Search
Successfully Navigating Family Search 1. Family Tree 2. Memories 3. Search Menu 1. FAMILY TREE After logging into FamilySearch, select Family Tree. The five options, towards the top of the page, within
More informationGETTING STARTED WITH GOOGLE S SCIENCE JOURNAL
GETTING STARTED WITH GOOGLE S SCIENCE JOURNAL ABOUT SCIENCE JOURNAL Google s Science Journal (GSJ) is a digital science notebook that allows users to conduct experiments and record their results all in
More informationBendex3D.designer. RAS Reinhardt Maschinenbau GmbH.
Bendex3D.designer RAS Reinhardt Maschinenbau GmbH www.ras-online.de Bendex3D.designer Entire consistency Does this sound familiar? You have outlined a roofing profile on-site. In production, you notice
More informationAP Art History Flashcards Program
AP Art History Flashcards Program 1 AP Art History Flashcards Tutorial... 3 Getting to know the toolbar:... 4 Getting to know your editing toolbar:... 4 Adding a new card group... 5 What is the difference
More informationStudent + Instructor:
DRAFT OF DEMO FOR The following set of instructions are an optional replacement for the Section Views in SolidWorks. This demo should help prepare the students for the Out of Class HW Student + Instructor:
More informationFamilySearch. When you sign into FamilySearch, your own personalized home page will appear. This page will consistently change.
1 FamilySearch When you sign into FamilySearch, your own personalized home page will appear. This page will consistently change. 1. On the left, some may see the latest things that FamilySearch has created
More informationPRODUCT FAMILY DATASHEET OSRAM DULUX D LED EM
OSRAM DULUX D LED EM LED replacement for CFLni, 2 tubes, with 2-pin G24d base for CCG and AC mains operation AREAS OF APPLICATION General illumination within ambient temperatures from - 20 +35 C Supermarkets
More informationExample Application C H A P T E R 4. Contents
C H A P T E R 4 Example Application This chapter provides an example application of how to perform steady flow water surface profile calculations with HEC-RAS. The user is taken through a step-by-step
More informationEnglish User's Guide
User's Guide Imacon Flextight 646 2 2002 Imacon A/S. All rights reserved. Imacon Flextight 646 User's Guide, Part No 70030036, revision A. The information in this manual is furnished for informational
More informationRendering and Documenting Light. Rendering Light. Light and Air
Rendering Light Light and Air 1 Light and Air Light and Air 2 Documenting Light Documenting Light 3 Documenting Light Documenting Light 4 Documenting Light Concepts Documenting Light Concepts 5 6 Documenting
More informationGenerations Automatic Stand-Alone Lace By Bernie Griffith Generations Software
We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A
More information2020 DRAWBOT INSTALLATION AND USE. Robert Ashford Henry Arnold 4-H OABB
2020 DRAWBOT INSTALLATION AND USE Robert Ashford Henry Arnold 4-H OABB 2020 DrawBot Software If you are viewing this document, you probably just finished assembling your 2020 DrawBot. In order to use your
More informationIn the following sections, if you are using a Mac, then in the instructions below, replace the words Ctrl Key with the Command (Cmd) Key.
Mac Vs PC In the following sections, if you are using a Mac, then in the instructions below, replace the words Ctrl Key with the Command (Cmd) Key. Zoom in, Zoom Out and Pan You can use the magnifying
More informationToo Cool T-shirt Quilts would love to make your T-shirt quilt.
Too Cool T-shirt Quilts would love to make your T-shirt quilt. The question we are asked most often is: What do I do next? Below is what to do next! Table of Contents Preparing your T-shirts How to tell
More informationChapter 4 Adding and Formatting Pictures
Impress Guide Chapter 4 Adding and Formatting Pictures OpenOffice.org Copyright This document is Copyright 2007 by its contributors as listed in the section titled Authors. You can distribute it and/or
More informationfull-color copy of your hard work on paper! You can choose a number of different size and cover options to give you the best match for your needs!
*Printing your PHOTOBOOK w/mms* There are plenty of things you can do with page projects completed in your My Memories Suite software, but one of the most exciting is to have your book uploaded for printing!
More information