ARU. Mounting and punching parts

Transcription

1 ARU Mounting and punching parts

2 0 ARU Mounting and punching parts

3 ARU Mounting and punching parts Contens page ARU metatarsal pads - 7 ARU joint stiffenings 8-9 ARU supports of the longitudinal and transversal arches, shaft cushions, forefoot pads, calcaneal spur 0 ARU cover soles, inner soles ARU heel counters and front caps, jjoint stiffenings, amputation and steel shanks ARU stiffening soles, steel caps, profile strips, steel soles, torqheel ARU punching contours - 0

4 ARU Mounting and punching parts ARU article discription article no. size 650 metatarsal pads cellular rubber, flesh colour foam rubber, grey foam rubber with leather cover cellular rubber with leather cover

5 ARU Mounting and punching parts article discription article no. size 50 foam rubber, grey foam rubber, grey foam rubber, grey foam rubber, grey

6 ARU Mounting and punching parts article discription article no. size 5 foam rubber, grey foam rubber, grey foam rubber with leather cover foam rubber, grey

7 ARU Mounting and punching parts article discription article no. size 90 foam rubber with leather cover foam rubber, grey foam rubber with leather cover

8 ARU Mounting and punching parts ARU joint inserts article discription article no. size ARU joint inserts 90 cellular rubber with cloth, natural white ARU joint inserts 900 foam rubber, grey

9 ARU Mounting and punching parts ARU joint inserts article discription article no. size ARU joint inserts 90 foam rubber with leather cover ARU joint inserts 6560 cellular rubber, grey ARU joint inserts 6565 firm rubber, pink

10 ARU Mounting and punching parts ARU article ARU supports of transversal arches 9 supports of the longitudinal and transversal arches discription firm rubber article no size 6 8 7D 9D D H H ARU supports of the longitudinal and transversal arches 97 cellular rubber with cloth, white (5/6) (7/8) (9/0) (/) 5 (/) 6 (5/6) ARU article ARU shaft cushions 60 shaft cushions, forefoot pads and calcaneal spur discription foam rubber, pink application article no l x h/mm approx.50x approx.900x6 approx.900x8 approx.900x9 size ARU Neofoam Gel forefoot pads/ calcaneal spur cellular gel, blue, very light, high reset force, high absorbtion of pressure during set off phase of the step density: approx. 0,5-0,5 g/cm in arch support and bedding construction, forefoot cushioning, load relief for calcaneal spur ,0 mm thickness 6,0 mm thickness

11 ARU Mounting and punching parts ARU cover soles, inner soles article discription application article no. thickness size cover soles with joint, with cushion, different colours cover soles with joint, black cover soles with joint, different colours ARU inner soles Ortho from Texton, injected PP wedge, thermoformable at 80 C, possible to cut and punch, nail and staple, does not break for fitting into orthopaedic custom-made shoes H H H Combi H5 ARU inner soles Flex from Altgerber Grubenflex leather ladies and men ,8-,0 mm,0-, mm,-, mm,-, mm,-, mm D D H H H

12 ARU ARU heel counters ARU Mounting and punching parts heel counters and front caps, joint stiffenings, amputation and steel shanks article discription application article no. thickness size altgerber, edged highest quality ,0-, mm,0-, mm,0-, mm,0-, mm,0-, mm K K K K DK Agoflex front caps from Agoflex IK 9, edged punching tool 769 straight punching tool 60 straight punching tool 07 curved punching tool 08 curved VK VK VK VK Tepp front caps from Tepp II, edged punching tool 769 straight 095 punching tool 60 straight 095 punching tool 07 curved 096 punching tool 08 curved 096 punching tool 60 straight 097 punching tool 08 curved 0975, mm, mm, mm, mm,7 mm,7 mm VK VK VK VK VK VK Vache-Croupon joints joint stiffenings, from leather small medium large ARU amputations shanks steel, specially processed, equal load of the sole during walking, no folding of the leather for fitting into orthopaedic custom-made shoes (left) (right) 5896(left) 5896(right) L 0 mm L 0 mm L 0 mm L 0 mm ARU steel shanks band steel, zinc coated, high resistance for fitting into orthopaedic custom-made shoes

13 ARU Mounting and punching parts ARU stiffening soles, steel caps, profile strips, steel soles, torqheel article discription application article no. thickness size flat pre-formed Carbon stiffening soles flat or pre-formed, unidirectional, rigid soles in construction of very good themoformable orthopaedic at approx. 75 C, shoes highly break-proof , mm, mm, mm, mm, mm, mm, mm, mm, mm, mm, mm, mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm,9 mm flat pre-formed Steel cap with or without steel cap band according to model for fitting into brogues and safety shoes according to DIN / XH XB Steel cap profile band rubber, black meter Steel soles flexible, pre-formed, according to DIN for fitting into brogues and safety shoes according to DIN DIN 777 DIN 778 DIN 779 DIN Torqheel rubber, black for the correction of the tibial torsion round small round large straight small straight medium straight large

14 Punching contours 695/0 695/ 695/7 Front caps straight we supply front caps straight for example from: ARUflex, Agoflex, Tepp II 69/ 69/ Heel counters stiffenings we supply heel counters stiffenings for example from: Agoflex IK 9 B 69/0

15 Punching contours 69/0 69/ Front caps curved we supply front caps curved for example from: ARUflex, Agoflex, Tepp II Heel counters we supply heel counters for example from: ARU own-brand collars 5

16 Punching contours 690/ 690/ 690/ Foot orthoses stiffenings we supply foot orthoses stiffenings for example from: ARUstab, ARUtherm, ARU-Carbon Metcore CTS, RX-Thermit, etc. 69/0 69/0 69/0 Joint stiffenings we supply joint stiffenings for example from: ARUstab and RX-Thermit,5 mm and,8 mm And according to material specification! 6

17 Punching contours 6975/0 6975/ 6975/ Foot orthoses stiffenings we supply foot orthoses stiffenings for example from: ARUstab, ARUtherm, ARU-Carbon Metcore CTS, RX-Thermit, etc. And according to material specification! 690 Forefront stiffenings we supply forefront stiffenings for example from: ARUstab, ARUtherm, RX-Thermit, etc. And according to material specification! 7

18 Punching contours 696/ 696/0 696/ Build-up material for foot orthoses we supply build-up material for foot orthoses for example from: ARU-Superflexkork, ARU-Orthoflexkork, ARUfant, Flexkork, Colastokork, etc. 6909/ And according to material specification! 6909/ Foot orthoses paddings we supply foot orthoses peddings for example from: ARUped 8, ARUped, ARUped 5, ARU Neofoamgel, Lunalasatic, etc. And according to material specification! 8

19 Punching contours 6907/0 6905/0 690/0 Heel cushions we supply heel cushions for example from: Nora Supersorb and Orthosorb as shock absorber and as heel cushion from P, Scheinolon and ARU Neofoamgel And according to material specification! Forefoot cushions we supply forefoot cushions for example from: ARUped 8, ARUped, ARU Neofoamgel, P, Scheinolon, Lunairmed, Lunairflex, etc. in different thicknesses Horseshoe-like rocking soles we supply horseshoe-like rocking soles for example from: ARUsoft, ARUleicht, Vibram-Jogging, Lunalight, Lunasoft, etc. in different thicknesses 698/0 699/0 690/0 9

20 Punching contours DK DK HK HK 5 Build-up and outsole / we supply build-up and outsole / for example from: ARUsoft, ARUzell-Soft, ARUstar, ARUleicht, ARUgum-series, Nora, etc. in different thickness. Build-up and outsole / we supply build-up and outsole / for example from: ARUsoft, ARUzell-Soft, ARUstar, ARUleicht, ARUgum-series, Nora, etc. in different thickness. 0

21 Punching contours 76 7 Build-up and buffer heels build-up and buffer heels with and without hole we supply for example from: ARUleicht, ARUsoft 0, ARUsoft 0, Lunalight, Lunasoft SL and SLW, etc. in different thickness and many colours. 6956/7 6956/ F 76 F 7 Thomas heels thomas heels we supply for example from: ARUleicht, ARUsoft 0, ARUsoft 0, Lunalight AR, Lunasoft SL and SLW, etc. in different thickness.

22 Punching contours Insole-covers we supply insole-covers for example from: Insole material BM 0, BM, BM 5, BM 0, ARU Grain Slit Butts, ARU Split Butts Grubenflex 690/0 690/ 690/ 690/ 690/ 690/5 690/6 Foot orthoses covers we supply foot orthoses covers for example from: cowhide and calf leather lining smooth and embossed, ARUsoft Bi-Color, ARUsoft Multicolor, ARUsoft 0 color, Lunasoft SL, ARUform and Multiform 690/6 690/ 690/ 605/ 605/ Build-up wedge soles and grip soles we supply build-up wedge soles and grip soles for example from: ARUleicht heel height mm, sole height 8 mm

23 Punching contours

24 Ruckgaber Orthopädie Service GmbH Roseckstraße 5 Gewerbegebiet Seebronn 708 Rottenburg Tel.: +9(0)7 57 / Fax: +9(0)7 57 / info@ruckgaber.de