Generative Design: Your AI Partner in Product Development. Date: Thursday, November 29, 2018
|
|
- Calvin Long
- 5 years ago
- Views:
Transcription
1 Generative Design: Your AI Partner in Product Development Date: Thursday, November 29, 2018
2 Webcast Logistics No Sound This is a streaming audio event. Make sure your speakers are on. Questions Type your Questions in the Ask A Question text box at anytime. Feedback Please complete the survey at the conclusion of the event Resources Download a PDF of the presentation and valuable content from the Resources box Technical Problems First Press your F5 key to refresh your browser. Click the Help icon below.
3 Participants Keith Meintjes Executive Consultant Simulation & Analysis CIMdata Tony Abbey Columnist FEA trainer Consultant Carina Maurer Product designer Moderator: Kenneth Wong Senior Editor Digital Engineering
4 CARINA S OPENING REMARKS Please submit your QUESTIONS now. Please complete our FEEDBACK SURVEY Carina Maurer Product designer Don t forget to check out our RESOURCES
5 RETAIL EXHIBITION Reuse of waste
6 Tool 40 % decrease in weight
7 Parametric swing Organic shape made of surfaces
8 Ski goggles Reduction of waste Easy to recycle
9 TONY S OPENING REMARKS Please submit your QUESTIONS now. Please complete our FEEDBACK SURVEY Tony Abbey Columnist FEA trainer Consultant Don t forget to check out our RESOURCES
10 TONY S OPENING REMARKS Traditional FEA structural simulation Target sign-off of existing design Requirements high accuracy Occurs downstream Generative Design using FEA Target explore radically new designs Requirements product improvement/innovation Occurs upstream
11 KEITH S OPENING REMARKS Please submit your QUESTIONS now. Please complete our FEEDBACK SURVEY Keith Meintjes Executive Consultant, Simulation and Analysis CIMdata Don t forget to check out our RESOURCES
12 CIMdata s Mission CIMdata is the leading independent global strategic management consulting and research authority focused exclusively on PLM and the digital transformation it enables. We are dedicated to maximizing our clients' ability to design, deliver, and support innovative products and services through the application of PLM.
13 Keith s Opening Remarks Ideas for generative design were developed in the late 1980s Adoption was low, except in a few cases like gauge BIW optimization and essentially 2D structures like sheet metal and brackets Maturing of additive manufacturing has led to a resurgence of interest It is NOT simply that we can now manufacture parts we could not make before
14 Generative Design Integrated performance-driven generative design systems are aimed at creating new design processes that produce spatially novel yet efficient and buildable designs through exploitation of current computing and manufacturing capabilities. Prof. Dr. Kristina Shea (ETH Zurich) K. Shea et al, Towards integrated performance-driven generative design tools, Automation in Construction 14 (2005)
15 Traditional Design Process Previous Designs (History) Design Space (Context) Design Constraints Create Design (CAD) Design Iterations Issues Performance Requirements Evaluate Design (CAE) Valid Design Build
16 Generative Design Process Previous Designs (History) Design Space (Context) Design Constraints Topology Optimization via CAE Performance Requirements Document Design (CAD) Valid Design Build
17 Generative Lives in a Sea of Others Generative Design Advanced Materials Additive Manufacturing alone or together will enable incredible innovation in years to come aided by other process and IT technologies 1 AI and Machine Learning Generative Design Industry 4.0
18 Integrated in the Lifecycle Digital Thread Portfolio Management Requirements Planning Conceptual Design Product Engineering Manufacturing Engineering Information: Re-use Re-purpose Re-mfg. Re-cover Re-cycle Re-tire Disposal & Recycling Maintenance & Repair In-service Operation Sales & Distribution Test & Quality Simulation & Validation Build and Produce
19 Alpha Go: AI and Machine Learning Go is an oriental game where tokens are placed on a grid It is more complicated than chess The best Go computer program could beat most players most of the time It learned from a data base of 100,000 games played by humans Alphabet (Google) then built Alpha Go It learned by playing against itself It was given only the rules of the game In a few days it could beat almost all players (and other computer programs almost all of the time By not using human data - by not using human expertise in any fashion - we've actually removed the constraints of human knowledge.
20 Defining Generative Design The Elbow Chair, designed in Autodesk Fusion 360. Image courtesy of Autodesk.
21 Generative Design Terms - 1 Parameter optimization Dimensions as design variables Shape changes Formal optimization methods Topology optimization Design space defined Topology changes Heuristic optimization methods
22 Generative Design Terms - 2 Lightweighting A wonderful all-embracing term! Avoids implication of the optimum Suggests a more robust engineering solution But an understrength initial design will add weight!!
23 WORKING WITH GENERATIVE DESIGN Generative design with lattice structure in Frustum Generate. Image courtesy of Frustum.
24 Designers and optimization - 1 Is design space too tight? Base could be wider Is design space too wide? Parametric too much search area Min Nom Max Topology redundant mesh to eliminate
25 Designers and optimization - 2 Are these realistic loads and boundary conditions? design space axial load bending load torsional load combined loads Missing load cases really bad news
26 Designers and optimization - 3 Are we asking the right questions? The answer to life the universe and all that? 42 Are we asking too many questions? Avoid becoming a one-person committee With too many variables to handle
27 Designers and optimization - 4 Second guess the solution why this design? Aim for a robust engineering solution Not an unrealistic optimum
28 WHO IS IT FOR? HOW DOES IT WITH MANUFACTURING Generative design with manufacturing constraint in Siemens NX. Image courtesy of Siemens PLM.
29 Who should use generative design? Generative Design for all! Play to your strengths in: Design Analysis Manufacturing
30 Q&A Keith Meintjes Executive Consultant, Simulation and Analysis CIMdata Please submit your QUESTIONS now. Tony Abbey Columnist FEA trainer Please complete our FEEDBACK SURVEY Don t forget to check out our RESOURCES Carina Maurer Product designer
31 TONY S CLOSING REMARKS Please submit your QUESTIONS now. Please complete our FEEDBACK SURVEY Tony Abbey Columnist FEA trainer Don t forget to check out our RESOURCES
32 Closing remarks Structural analysis optimization in a renaissance at present Topology Optimization - Generative Design rapid prototyping is the catalyst exciting. After languishing as a specialist analyst tool structural optimization is now back in the mainstream Traditional methods sizing and shape tedious, difficult.
33 Closing remarks On my Christmas list Realistic manufacturing simulation Realistic stress constraints Optimizing structural supports Nonlinear response Linking Topology and Parametric Optimization
34 Closing remarks Tony Abbey contact details: FEA Resource website LinkedIn
35 CARINA S CLOSING REMARKS Please submit your QUESTIONS now. Please complete our FEEDBACK SURVEY Carina Maurer Product designer Don t forget to check out our RESOURCES
36 KEITH S CLOSING REMARKS Please submit your QUESTIONS now. Please complete our FEEDBACK SURVEY Keith Meintjes Executive Consultant, Simulation and Analysis CIMdata Don t forget to check out our RESOURCES
37 Thank you! Keith Meintjes Executive Consultant, Simulation and Analysis CIMdata Tony Abbey Columnist FEA trainer Carina Maurer Product designer Moderator: Kenneth Wong Senior Editor Digital Engineering
Heading back to Mars with a thermal control system developed using NX
Aerospace JPL Heading back to Mars with a thermal control system developed using NX Product NX Business challenges Tighter schedules Large daily temperature swings during the life of the mission Bigger
More informationJPL. Heading back to Mars with thermal control system developed using NX. Aerospace. Product NX
Aerospace JPL Heading back to Mars with thermal control system developed using NX Product NX Business challenges Tighter schedules Large daily temperature swings during the life of the mission Bigger rover
More informationADDITIVE MANUFACTURING FOR INNOVATIVE DESIGN AND PRODUCTION
FOR INNOVATIVE DESIGN AND PRODUCTION INTRODUCTION The implications of additive manufacturing (AM), also known as 3D printing, span the entire product lifecycle and compel us to reimagine how products are
More informationAPPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY
APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY JULY 2016 Contents Page number Introduction 1 Subject aims and objectives 2 Subject content 3 Core technical principles 3 Core designing and
More informationLeverage 3D Master. Improve Cost and Quality throughout the Product Development Process
Leverage 3D Master Improve Cost and Quality throughout the Product Development Process Introduction With today s ongoing global pressures, organizations need to drive innovation and be first to market
More informationCompany Overview. Brainchild Engineering, Inc. Helping inventors and innovators make their ideas reality
Brainchild Engineering, Inc. Helping inventors and innovators make their ideas reality Company Overview What is Brainchild Engineering? Brainchild Engineering is a company dedicated to helping innovators
More informationA Simulation Revolution is Needed to Solve the CAE Industry s Problems
A Simulation Revolution is Needed to Solve the CAE Industry s Problems Business Drivers Business Drivers The worldwide business environment is seeing a strong focus on strategic goals for improving competitiveness
More informationINTEGRIS 3-D Printing: How Rapid Prototyping Saved Our Client Money
INTEGRIS 3-D Printing: How Rapid Prototyping Saved Our Client Money Have you ever found yourself wondering about what exactly it is that goes on here at INTEGRIS Group? CONTENTS Who is INTEGRIS? 3 Why
More informationRequirements Gathering using Object- Oriented Models
Requirements Gathering using Object- Oriented Models Cycle de vie d un logiciel Software Life Cycle The "software lifecycle" refers to all stages of software development from design to disappearance. The
More informationSystems Engineering Overview. Axel Claudio Alex Gonzalez
Systems Engineering Overview Axel Claudio Alex Gonzalez Objectives Provide additional insights into Systems and into Systems Engineering Walkthrough the different phases of the product lifecycle Discuss
More informationAutodesk Inventor LT. Easy as 1, 2, 3D.
Autodesk Inventor LT Easy as 1, 2, 3D. Model Your Part Designs in 3D With parametric 3D solid part modeling in Autodesk Inventor LT software, you can model your part designs in 3D instead of simply drawing
More informationProgress in Direct Metal Laser Sintering for the Jewellery & Watch Industry
Progress in Direct Metal Laser Sintering for the Jewellery & Watch Industry By David Fletcher Topics Abstract DMLS An Introduction emanufacturing User Interface File Cleaning File Encryption Part Orientation
More informationCONCURRENT ENGINEERING
CONCURRENT ENGINEERING S.P.Tayal Professor, M.M.University,Mullana- 133203, Distt.Ambala (Haryana) M: 08059930976, E-Mail: sptayal@gmail.com Abstract It is a work methodology based on the parallelization
More informationPhysics-Based Modeling In Design & Development for U.S. Defense Virtual Prototyping & Product Development. Jennifer Batson Ab Hashemi
Physics-Based Modeling In Design & Development for U.S. Defense Virtual Prototyping & Product Development Jennifer Batson Ab Hashemi 1 Outline Innovation & Technology Development Business Imperatives Traditional
More informationRadiate Engineering & Design
Radiate Engineering & Design Advanced development of lightweight products and disruptive innovation Radiate Engineering & Design is a vertically-integrated composite expert, product developer, and leading
More informationAlex Friedman s Portfolio
Alex Friedman s Portfolio Northwestern University McCormick School of Engineering Product Design Engineering Class of 2018 alexfriedman2018@u.northwestern.edu 857-294-4600 www.alexfriedman.me Engineering
More informationDriving the Future or Product Development
Driving the Future or Product Development Image courtesy of Tesla Motors, Inc. Image courtesy of Gensler. The Martian 2015 Twentieth Century Fox. All rights reserved. Means of Production Hyper- Connectivity
More informationNAPA User Meeting 2017
1 (7) DAY 1 TUESDAY 6 JUNE 2017 9:00-10:30 Words of welcome Product News 2017 This presentation gives insight on the latest new features in NAPA and future plans of our solutions. 10:30-11:00 COFFEE 11:00-12:30
More informationCAMBRIDGE NATIONAL IN ENGINEERING
CAMBRIDGE NATIONAL IN ENGINEERING Engineering Design R105, R106, R107, R108 A comprehensive 99 page overview of how the following qualifications match to the Learning Outcomes for National in Engineering,
More informationHOW TO SYSTEMISE YOUR BUSINESS
HOW TO SYSTEMISE YOUR BUSINESS Stop letting your business run you life by creating powerful systems, so it runs itself. SYSTEMS EXPERT Natasha Vorompiova The systems bundle has been created by the wonderful
More informationACCELERATING TECHNOLOGY VISION FOR AEROSPACE AND DEFENSE 2017
ACCELERATING TECHNOLOGY VISION FOR AEROSPACE AND DEFENSE 2017 TECHNOLOGY VISION FOR AEROSPACE AND DEFENSE 2017: THROUGH DIGITAL TURBULENCE A powerful combination of market trends, technology developments
More informationMetal additive manufacturing for industrial applications. Global network of solutions centres. Applications expertise for a wide range of industries
Brochure: Renishaw Solutions Centres for additive manufacturing Your partner for innovative manufacturing Metal additive manufacturing for industrial applications Global network of solutions centres Applications
More informationBy Mark Hindsbo Vice President and General Manager, ANSYS
By Mark Hindsbo Vice President and General Manager, ANSYS For the products of tomorrow to become a reality, engineering simulation must change. It will evolve to be the tool for every engineer, for every
More informationMoving Manufacturing to the Left With Immersion Technology ESI IC.IDO
Product Lifecycle Manufacturing With Immersion Technology ESI IC.IDO A presentation of IC.IDO, leading decision-making platform based on virtual reality Tony Davenport Manager, Aerospace & Defense ESI
More informationMoving to Model-Based Design
Infrastructure Solutions White Paper Moving to Model-Based Design Choosing Between 2D and 3D Do you really have to choose between 2D and 3D? The answer is no, but it is important to know why. Over the
More informationAdditive Manufacturing: A New Frontier for Simulation
BEST PRACTICES Additive Manufacturing: A New Frontier for Simulation ADDITIVE MANUFACTURING popularly known as 3D printing is poised to revolutionize both engineering and production. With its capability
More informationCoupled Design and Analysis (CDA): Win the Race to Market
October 10, 2003 Coupled Design and Analysis (CDA): Win the Race to Market The race to drive down Time to Market has never been as fierce as it is in today s highly competitive, global, price sensitive
More informationAnnual. Real Estate. Outlook
Annual Real Estate Outlook 2014 Annual Outlook 2014 Thank you for attending ULI British Columbia s premier real estate trends and forecast event of the year, featuring insights from leading experts both
More informationTaco Comfort Solutions
Industrial machinery and heavy equipment Product Simcenter Heating and cooling equipment manufacturer uses STAR-CCM+ to save time and costs by rapidly simulating multiple pump designs Business challenges
More informationREINVENT YOUR PRODUCT
INDUSTRY X.0: REINVENT YOUR PRODUCT REINVENT YOUR BUSINESS ACCENTURE@HANNOVER MESSE 2019 HANNOVER MESSE 2019 FACTS LEAD THEME: INTEGRATED INDUSTRY - INDUSTRIAL INTELLIGENCE KEY FACTS WHAT? FOCUS TOPICS
More informationTOP TECHNOLOGY CHALLENGES AND THE RELATIONSHIP TO THE AUDIT PLAN. ISACA/Protiviti 6 th Annual IT Audit Benchmarking Survey March 15, 2017 Webinar
TOP TECHNOLOGY CHALLENGES AND THE RELATIONSHIP TO THE AUDIT PLAN ISACA/Protiviti 6 th Annual IT Audit Benchmarking Survey March 15, 2017 Webinar A REMINDER 1 We are recording today s webinar and it will
More informationMaking EFFECTIVE use of LinkedIn for Professional Networking. What is Social Media & Why is it Important? Through your network you can:
Making EFFECTIVE use of LinkedIn for Professional Networking Presented by Bryan C Webb, P. Eng. bwebb50@cogeco.ca www.linkedin.com/in/bryanwebb http://twitter.com/bryancwebb Copyright Nov 2009 What is
More informationNAPA User Meeting 2017
1 (7) DAY 1 TUESDAY 6 JUNE 2017 9:00-10:30 Words of welcome Product News 2017 This presentation gives insight on the latest new features in NAPA and future plans of our solutions. 10:30-11:00 COFFEE 11:00-12:30
More informationIn the heart of Industrial electronics
In the heart of Industrial electronics DRIVES SAFETY, SECURITY BUILDING CONTROL MEDICAL ELEVATORS INSTRUMENTATION, MEASUREMENT INDUSTIAL AUTOMATION POWER & UTILITIES ESCALATORS RAILWAY, MARINE & OTHER
More informationTechnology trends in the digitalization era. ANSYS Innovation Conference Bologna, Italy June 13, 2018 Michele Frascaroli Technical Director, CRIT Srl
Technology trends in the digitalization era ANSYS Innovation Conference Bologna, Italy June 13, 2018 Michele Frascaroli Technical Director, CRIT Srl Summary About CRIT Top Trends for Emerging Technologies
More informationscinnovation-global.com Innovative Engineering Robust Solutions
scinnovation-global.com Innovative Engineering Robust Solutions SC INNOVATION IS A SPECIALIST ENGINEERING COMPANY, EXPERIENCED IN PROVIDING PRODUCTS AND SERVICES FOR DEMANDING ENVIRONMENTS WHERE QUALITY
More informationDeveloping Digital Manufacturing Capability for U.S. Industry: Re-shaping the Enterprise
Developing Digital Manufacturing Capability for U.S. Industry: Re-shaping the Enterprise Nathan Hartman, Professor & Associate Head of Computer Graphics, Purdue Polytechnic Institute SmartManufacturingSeries.com
More informationSession 3 _ Part A Effective Coordination with Revit Models
Session 3 _ Part A Effective Coordination with Revit Models Class Description Effective coordination relies upon a measured strategic approach to using clash detection software. This class will share best
More informationJob Description. Commitment: Must be available to work full-time hours, M-F for weeks beginning Summer of 2018.
Research Intern Director of Research We are seeking a summer intern to support the team to develop prototype 3D sensing systems based on state-of-the-art sensing technologies along with computer vision
More informationNASA s Strategy for Enabling the Discovery, Access, and Use of Earth Science Data
NASA s Strategy for Enabling the Discovery, Access, and Use of Earth Science Data Francis Lindsay, PhD Martha Maiden Science Mission Directorate NASA Headquarters IEEE International Geoscience and Remote
More informationTR21042 Geotechnical BIM: Applying BIM principles to the subsurface
TR21042 Geotechnical BIM: Applying BIM principles to the subsurface Gary Morin Keynetix Learning Objectives How the general principles of BIM can be applied to the subsurface. The use of tools such as
More informationCreation of New Manufacturing Diagnostic Process by Co-creation with Customer
Creation of New Manufacturing Diagnostic Process by Co-creation with Customer Tomohiro Aoyagi Yojiro Numata A key issue at manufacturing sites is how to ensure that manufactured products are consistent
More informationUsing your 3D CAD models to create interactive technical documents
Digital ebook A Design World Reference Using your 3D CAD models to create interactive technical documents 02 Move towards digital manufacturing use your 3D CAD models to create excellent technical documents
More informationAQA A-Level Design & Technology: Product Design (7552) Designing & Making Principles: Exam: June Paper 1 Paper 2
Designing & Making Principles: : June 2019 Paper 1 Paper 2 What s Assessed: Technical Principles Designing & Making Principles Specialist Knowledge How it s assessed: Written exam: 2.5 hours 120marks 30%
More information132 - Edit Imported Assemblies to Create New Designs with Synchronous Technology
4 th Generation VLC courtesy of Edison2 132 - Edit Imported Assemblies to Create New Designs with Synchronous Technology Ricardo Espinosa, R&D Engineering Services Manager, Kimball Furniture Group #SEU13
More informationANNUAL DFMPro USER MEET
ANNUAL DFMPro USER MEET AN EVENT HOSTED BY HCL THAT CONNECTS INDUSTRY LEADING PRODUCT DESIGN EXPERTS, TECHNOLOGISTS AND THOUGHT LEADERS DETROIT, MI 22 nd JANUARY, 2018 Richard A & B Conference Hall, Level
More informationPERSPECTIVE. Knowledge based Engineering (KBE) Key Product Development Technology to Enhance Competitiveness. Abstract. Devaraja Holla V.
PERSPECTIVE Knowledge based Engineering (KBE) Key Product Development Technology to Enhance Competitiveness Devaraja Holla V. Abstract In today s competitive environment, it becomes imperative to look
More informationModel-Based Definition using Creo Parametric and GD&T Advisor
Model-Based Definition using Creo Parametric and GD&T Advisor Ted Anderson Product Line Manager Sigmetrix, LLC Model-Based Definition What is it? Why Model-Based Definition? What tools are required to
More informationAC : PARAMETRIC MODELING, RAPID PROTOTYPING, AND A WALKER ROBOT
AC 2011-12: PARAMETRIC MODELING, RAPID PROTOTYPING, AND A WALKER ROBOT Randy Shih, Oregon Institute of Technology Randy Shih is a Professor in the Manufacturing and Mechanical Engineering and Technology
More informationKODAK Digital Sheetfed Presses. Expect more.
KODAK Digital Sheetfed Presses Expect more. Say yes to more jobs... Kodak s digital sheetfed presses can help you thrive, with unique technology that drives efficiency and opportunity across the industry
More informationSoftware-Intensive Systems Producibility
Pittsburgh, PA 15213-3890 Software-Intensive Systems Producibility Grady Campbell Sponsored by the U.S. Department of Defense 2006 by Carnegie Mellon University SSTC 2006. - page 1 Producibility
More informationWelcome to another episode of Getting the Most. Out of IBM U2. This is Michael Logue, and I'll be your host
Welcome to another episode of Getting the Most Out of IBM U2. This is Michael Logue, and I'll be your host for today's episode which takes a look at getting the most out of U2 Technical Support. First
More informationVEX Adjustable C-Channel
Miraleste Intermediate School Robotics MEME Team 7035M Miraleste Intermediate School STEM Program (Rancho Palos Verdes, CA) VEX Adjustable C-Channel 2019 Make It Real CAD Engineering Challenge Shirzad
More informationNagoya International School Parent Guide to Design
Nagoya International School Parent Guide to Design Design is the fundamental soul of a man-made creation that ends up expressing itself in successive outer layers of a product or service. Steve Jobs Design
More informationRheology Solutions Pty Ltd. Focused on providing our customers with materials characterisation solutions through knowledge, experience and support.
Rheology Solutions Pty Ltd Focused on providing our customers with materials characterisation solutions through knowledge, experience and support. Rheology Solutions Our vision is to recognise the importance
More informationArtificial Intelligence Adversarial Search
Artificial Intelligence Adversarial Search Adversarial Search Adversarial search problems games They occur in multiagent competitive environments There is an opponent we can t control planning again us!
More informationATI Horizon (AM) Programme helping to build the future Additively
ATI Horizon (AM) Programme helping to build the future Additively In Mar 2014, five partners came together to work on a 13.4 million ATI-funded project called ATI Horizon (AM) in order to develop Additive
More informationAutodesk for the Transportation Industry. Experience It Before It s Real
Autodesk for the Transportation Industry Experience It Before It s Real Get Your Products Moving Easier and Faster Improve collaboration and productivity with the Autodesk solution for Digital Prototyping.
More informationAdditive Manufacturing is making headway at NAVAIR Lakehurst
An engineer removes a 3-D printed hydraulic manifold from the 3-D printer at NAVAIR's Lakehurst site at Joint Base McGuire-Dix-Lakehurst, N.J. JOINT BASE MCGUIRE-DIX-LAKEHURST Additive Manufacturing (AM),
More informationS imulation S uper P owers
S imulation S uper P owers Would you rather be a fire fighter or a superhero? T he answer is obvious: superhero. It s great to be able to put out a fire on a project when it starts, but it is even better
More informationHolographic Fabrication of Woven Steel Structures
Holographic Fabrication of Woven Steel Structures Mixed reality technology allows physical environments to be overlaid with digital data, at scale and precisely fixed in place. Despite limitations of first-generation
More informationLeland Decker James Truskin
Leland Decker James Truskin Chrysler Group LLC 2013 Chrysler Group LLC Overview 1. Introduction to the Aluminum X-Brace 2. 2013 SRT Viper Lightweight Body Technologies 3. Concept Design and Development
More informationCorporate Subscription. NAFEMS reference library at the click of a button
Corporate Subscription NAFEMS reference library at the click of a button The NAFEMS Corporate e-library gives access to downloadable copies of over 140 acclaimed NAFEMS publications; including the newest
More information2018 ASSESS Update. Analysis, Simulation and Systems Engineering Software Strategies
2018 ASSESS Update Analysis, Simulation and Systems Engineering Software Strategies The ASSESS Initiative The ASSESS Initiative was formed to bring together key players to guide and influence strategies
More informationInstrumentation, Controls, and Automation - Program 68
Instrumentation, Controls, and Automation - Program 68 Program Description Program Overview Utilities need to improve the capability to detect damage to plant equipment while preserving the focus of skilled
More informationFoundations of Artificial Intelligence
Foundations of Artificial Intelligence 42. Board Games: Alpha-Beta Search Malte Helmert University of Basel May 16, 2018 Board Games: Overview chapter overview: 40. Introduction and State of the Art 41.
More informationEMERGE GAMING LAUNCHES ARCADE X EMERGE GAMING LAUNCHES ARCADE X : ASX MEDIA RELEASE 23 APRIL PAGE 1
EMERGE GAMING LAUNCHES ARCADE X EMERGE GAMING LAUNCHES ARCADE X : ASX MEDIA RELEASE 23 APRIL 2018 - PAGE 1 01 / IN T RODUC T I ON EMERGE G A MING L AUNCHE S A RC A DE X : A S X MEDI A R EL E A SE 2 3 A
More informationEsri and Autodesk What s Next?
AN ESRI VISION PAPER JANUARY 2018 Esri and Autodesk What s Next? Copyright 2018 Esri All rights reserved. Printed in the United States of America. The information contained in this document is the exclusive
More informationBrowser Streaming and Mobile-App Instructions for ios and Android tm
Browser Streaming and Mobile-App Instructions for ios and Android tm February 07 Browser and Mobile-Device Instructions Browser Instructions... Access Comics Plus: Library Edition Through Your Browser
More informationINVESTIGATION OF ACTUAL SITUATION OF COMPANIES CONCERNING USE OF THREE-DIMENSIONAL COMPUTER-AIDED DESIGN SYSTEM
INVESTIGATION OF ACTUAL SITUATION OF COMPANIES CONCERNING USE OF THREE-DIMENSIONAL COMPUTER-AIDED DESIGN SYSTEM Shigeo HIRANO 1, 2 Susumu KISE 2 Sozo SEKIGUCHI 2 Kazuya OKUSAKA 2 and Takashi IMAGAWA 2
More informationWORLDSKILLS STANDARD SPECIFICATION
WORLDSKILLS STANDARD SPECIFICATION Skill 03 Manufacturing Team Challenge WSC2017_WSSS03 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge, understanding
More informationDr Antony Robotham - Executive Director EWG-DSS Liverpool April 2012
Dr Antony Robotham - Executive Director EWG-DSS Liverpool 2012 12-13 April 2012 THE VALUE OF SIMULATION AND IMMERSIVE VIRTUAL REALITY ENVIRONMENTS TO DESIGN DECISION MAKING IN NEW PRODUCT DEVELOPMENT DR
More informationDigital Engineering. Phoenix Integration Conference Ms. Philomena Zimmerman. Deputy Director, Engineering Tools and Environments.
Digital Engineering Phoenix Integration Conference Ms. Philomena Zimmerman Deputy Director, Engineering Tools and Environments April 2018 Apr 2018 Page-1 DISTRIBUTION STATEMENT A: UNLIMITED DISTRIBUTION
More informationOne Size Doesn't Fit All Aligning VR Environments to Workflows
One Size Doesn't Fit All Aligning VR Environments to Workflows PRESENTATION TITLE DATE GOES HERE By Show of Hands Who frequently uses a VR system? By Show of Hands Immersive System? Head Mounted Display?
More informationStrategic Plan Public engagement with research
Strategic Plan 2017 2020 Public engagement with research Introduction Public engagement with research (PER) is more important than ever, as the value of these activities to research and the public is being
More informationCS 387: GAME AI BOARD GAMES. 5/24/2016 Instructor: Santiago Ontañón
CS 387: GAME AI BOARD GAMES 5/24/2016 Instructor: Santiago Ontañón santi@cs.drexel.edu Class website: https://www.cs.drexel.edu/~santi/teaching/2016/cs387/intro.html Reminders Check BBVista site for the
More informationCAE/Design! Research Area Group!
CAE/Design! Research Area Group! Our Faculty! Bert Bras Cassandra Telenko Seung-Kyum Choi Chris Paredis Kate Fu Dave Rosen Roger Jiao Suresh Sitaraman Julie Linsey Yan Wang Sustainable Design & Manufacturing!
More informationLEVERAGING VIRTUAL REALITY Visualizing Risk & Opportunity Mike Prefling & Greg Martin Autodesk Join the conversation #AU2016
LEVERAGING VIRTUAL REALITY Visualizing Risk & Opportunity Mike Prefling & Greg Martin Join the conversation #AU2016 To over use the not used often enough baseball analogy, we don t even think we are in
More informationGlobal Competition 2010: The Keys to a Winning Entry. 20 January 2010
Global Competition 2010: The Keys to a Winning Entry 20 January 2010 Moderator Today s Moderator: Paula Berger NFC Forum Executive Director 2 Audio Tips All audio comes through your computer - Use your
More informationA Hands-on Approach in Teaching Machine Design
Paper ID #11528 A Hands-on Approach in Teaching Machine Design Dr. Luis E Monterrubio, Robert Morris University Luis E. Monterrubio, Ph.D. Mechanical Engineering Assistant Professor of Mechanical Engineering
More informationHands-On UX Design Workshop
[ image ] Hands-On UX Design Workshop Agenda and Engagement Details March 2019 1 January 2018 About Us 20+ yrs Design Leadership Our Team We are digital experience consultants that help companies design
More informationWHITE PAPER FACILITY FOCUS: GMP Facility Modernization. By: David M. Marks, P.E.
WHITE PAPER FACILITY FOCUS: GMP Facility Modernization By: David M. Marks, P.E. July 2017 Introduction In recent years, intensified industry competition and cost pressures have renewed interest in modernizing
More informationInsights from the Scottish Aquaculture Innovation Centre
The University of Maine DigitalCommons@UMaine Annual Maine Aquaculture R&D and Education Summits Conferences and Summits 3-6-2017 Insights from the Scottish Aquaculture Innovation Centre Carter Newell
More informationLearning technology trends and implications
Learning technology trends and implications ISA s 2016 Annual Business Retreat By Anders Gronstedt, Ph.D., President, Gronstedt Group 1.15 pm, March 22, 2016 Disruptive learning trends Gamification Meta
More informationWelcome. There s no more exciting time, and no more exciting place, to put your talents to work.
Welcome There s no more exciting time, and no more exciting place, to put your talents to work. My life before McKinsey Born in Lausanne Exchange at the University of Birmingham PhD in Group Theory at
More informationPower tools for mechanical design. AutoCAD. Mechanical
Power tools for mechanical design. AutoCAD Mechanical The AutoCAD Mechanical Advantage To compete and win in today s design marketplace, engineers need to create and revise mechanical drawings faster than
More informationDATA AT THE CENTER. Esri and Autodesk What s Next? February 2018
DATA AT THE CENTER Esri and Autodesk What s Next? February 2018 Esri and Autodesk What s Next? Executive Summary Architects, contractors, builders, engineers, designers and planners face an immediate opportunity
More informationGTMI Strategic Planning: Additive Manufacturing with Metals
GTMI Strategic Planning: Additive Manufacturing with Metals Opportunities and Challenges April 10, 2018 Ben Wang, GTMI Executive Director Don McConnell, Vice President, Industry Collaboration Suman Das,
More informationBattleship as a Dialog System Aaron Brackett, Gerry Meixiong, Tony Tan-Torres, Jeffrey Yu
Battleship as a Dialog System Aaron Brackett, Gerry Meixiong, Tony Tan-Torres, Jeffrey Yu Abstract For our project, we built a conversational agent for Battleship using Dialog systems. In this paper, we
More informationIndustry 4.0: the new challenge for the Italian textile machinery industry
Industry 4.0: the new challenge for the Italian textile machinery industry Executive Summary June 2017 by Contacts: Economics & Press Office Ph: +39 02 4693611 email: economics-press@acimit.it ACIMIT has
More informationONE DAY SKILL DEVELOPMENT PROGRAM REPORT ON. Application Awareness on CAD/CAE/CAM Tools. 24 th March 2018 Held at ACS COLLEGE OF ENGINEERING Bengaluru
ONE DAY SKILL DEVELOPMENT PROGRAM REPORT ON Application Awareness on CAD/CAE/CAM Tools 24 th March 2018 Held at ACS COLLEGE OF ENGINEERING Bengaluru Supported by MATRICAL TECHNOLOGIES Organized By Department
More informationWORKING TODAY FOR A BETTER TOMORROW. What we do
What we do WORKING TODAY FOR A BETTER TOMORROW Eisenmann is a world leader in surface finishing, material flow automation, thermal process technology, and environmental engineering. For around 65 years,
More informationUNIT-III LIFE-CYCLE PHASES
INTRODUCTION: UNIT-III LIFE-CYCLE PHASES - If there is a well defined separation between research and development activities and production activities then the software is said to be in successful development
More informationPrograms for Academic and. Research Institutions
Programs for Academic and Research Institutions Awards & Recognition #1 for Patent Litigation Corporate Counsel, 2004-2014 IP Litigation Department of the Year Finalist The American Lawyer, 2014 IP Litigation
More informationAutocad d Building Design Manual READ ONLINE
Autocad 2013 2d Building Design Manual READ ONLINE Autocad 2013 User manual in PDF - Manuals And - AutoCAD 2013 is a software application for 2D and 3D computer-aided design (CAD) Download user manual
More informationPrototyping: Accelerating the Adoption of Transformative Capabilities
Prototyping: Accelerating the Adoption of Transformative Capabilities Mr. Elmer Roman Director, Joint Capability Technology Demonstration (JCTD) DASD, Emerging Capability & Prototyping (EC&P) 10/27/2016
More informationHARBOR SMARTSPHERE RESEARCH SERVICES FOR M2M AND THE PERVASIVE INTERNET
HARBOR SMARTSPHERE RESEARCH SERVICES FOR M2M AND THE PERVASIVE INTERNET Living Business Intelligence on Internet-Enabled Device Networking, Smart Services, and Global Enterprise Automation. January, 2004
More informationDigital Medical Device Innovation: A Prescription for Business and IT Success
10 September 2018 Digital Medical Device Innovation: A Prescription for Business and IT Success A Digital Transformation is reshaping healthcare. New technology, mobility, and advancements in computing
More informationAdvanced engineering design capabilities applied for developing a technological device for automated assembly
Advanced engineering design capabilities applied for developing a technological device for automated assembly Ionut Madalin Pista 1*, Vasile Merticaru, Gheorghe Nagit 1, and Marius Ionut Ripanu 1 1 Gheorghe
More informationTesting in the Lifecycle
Testing in the Lifecycle Conrad Hughes School of Informatics Slides thanks to Stuart Anderson 19 January 2010 Software Testing: Lecture 3 1 Software was difficult to get right in 1982 2 It was still difficult
More information