6MBI45V25 IGBT MODULE (V series) 2V / 45A / 6 in one package Features Compact Package P.C.Board Mount Low VCE (sat) RoHS Compliant product Applications Inverter for Motor Drive AC and DC Servo Drive Amplifier Uninterruptible Power Supply Indusial machines, such as welding machines Maximum Ratings and Characteristics Absolute Maximum Ratings (at Tc=25 C unless otherwise specified) Items Symbols Conditions Maximum ratings Units CollectorEmitter voltage VCES 2 V GateEmitter voltage VGES ±2 V Ic Continuous Tc=25 C 6 Tc= C 45 Collector current Ic pulse ms 9 A Ic 45 Ic pulse ms 9 Collector power dissipation PC device 225 W Junction temperature Tj 75 Operation temperature Tjop 5 (under switching conditions) C Case temperature TC 25 Storage temperature Tstg 4 to +25 Inverter Isolation voltage between terminal and copper base (*) Viso AC : min. 25 VAC between thermistor and others (*2) Mounting (*3) 3.5 Screw torque N m Terminals (*4) 4.5 Note *: All terminals should be connected together during the test. Note *2: Two thermistor terminals should be connected together, other terminals should be connected together and shorted to base plate during the test. Note *3: Recommendable value : 2.53.5 Nm (M5) Note *4: Recommendable value : 3.54.5 Nm (M6) 7376b MARCH 25
6MBI45V25 Elecical characteristics (at Tj= 25 C unless otherwise specified) Items Symbols Conditions Inverter Thermistor Characteristics min. typ. max. Zero gate voltage collector current ICES VGE = V, VCE = 2V 3. ma GateEmitter leakage current IGES VGE = V, VGE = ±2V 6 na GateEmitter threshold voltage VGE (th) VCE = 2V, IC = 45mA 6. 6.5 7. V CollectorEmitter saturation voltage VCE (sat) (terminal) VCE (sat) (chip) VGE = 5V IC = 45A VGE = 5V IC = 45A Tj=25 C 2.3 2.75 Tj=25 C 2.6 Tj=5 C 2.65 Tj=25 C.75 2.2 Tj=25 C 2.5 Tj=5 C 2. Internal gate resistance RG(int).67 Ω Input capacitance Cies VCE = V, VGE = V, f = MHz 4 nf Turnon time Turnoff time Forward on voltage VCC = 6V 55 (i) IC = 45A VGE = ±5V RG =.52Ω LS = 8nH 8 2 5 tf VF (terminal) VF (chip) VGE = V IF = 45A VGE = V IF = 45A Tj=25 C 2.25 2.7 Tj=25 C 2.4 Tj=5 C 2.35 Tj=25 C.7 2.5 Tj=25 C.85 Tj=5 C.8 Reverse recovery time r IF = 45A 2 nsec Resistance R T = 25 C 5 T = C 465 495 52 B value B T = 25 / 5 C 335 3375 345 K Units V nsec V Ω Thermal resistance characteristics Items Symbols Conditions Characteristics min. typ. max. Thermal resistance (device) Rth(jc) Inverter IGBT.66 Inverter FWD. Contact thermal resistance (device) (*5) Rth(cf) with Thermal Compound.67 Note *5: This is the value which is defined mounting on the additional cooling fin with thermal compound. Units C/W 2
6MBI45V25 Characteristics (Representative) Collector current vs. CollectorEmitter voltage (typ.) Tj= 25 C / chip Collector current vs. CollectorEmitter voltage (typ.) Tj= 5 C / chip 8 5V 2V 8 Vge= 2V 5V 2V Vge=2V 6 V 4 2 8V 2 3 4 5 6 V 4 2 8V 2 3 4 5 CollectorEmitter voltage: Vce [V] CollectorEmitter voltage: Vce [V] Collector Current: Ic [A] Collector current vs. CollectorEmitter voltage (typ.) Vge= 5V / chip 8 6 4 2 Tj=25 C 25 C 5 C 2 3 4 5 CollectorEmitter Voltage: Vce [V] CollectorEmitter Voltage: Vce [V] CollectorEmitter voltage vs. GateEmitter voltage (typ.) Tj= 25 C / chip 8 6 4 2 5 5 2 25 GateEmitter Voltage: Vge [V] Ic=9A Ic=45A Ic=225A Gate Capacitance vs. CollectorEmitter Voltage (typ.) Vge= V, ƒ= MHz, Tj= 25 C Gate Capacitance: Cies, Coes, Cres [nf] *** Cies Cres Coes 2 3 CollectorEmitter voltage: Vce [V] GateEmitter voltage: VGE [V] 2 5 5 5 5 Dynamic Gate Charge (typ.) Vcc=6V, Ic=45A, Tj= 25 C VGE VCE 2 5 25 25 5 Gate charge: Qg [nc] 8 6 4 2 2 4 6 8 CollectorEmitter voltage: VCE [V] 3
6MBI45V25 Switching time vs. Collector current (typ.) Switching time vs. Collector current (typ.) Vcc=6V, Vge=±5V, Rg=.52Ω, Tj=25 C Vcc=6V, Vge=±5V, Rg=.52Ω, Tj=25 C, 5 C Switching time:,,, tf [nsec] tf 2 4 6 8 Switching time:,,, tf [nsec] Tj=5 o C tf 2 4 6 8 Switching time vs. Gate resistance (typ.) Vcc=6V, Ic=45A, Vge=±5V, Tj=25 C, 5 C Switching time:,,, tf [nsec] Tj=5 o C Gate resistance: Rg [Ω]. tf Switching loss vs. Collector current (typ.) Vcc=6V Vge=±5V, Rg=.52Ω, Tj=25 C, 5 C Switching loss: Eon, Eoff, Err [mj/pulse] 5 Tj=5 o C Eoff Err 5 Eon 2 4 6 8 Switching loss: Eon, Eoff, Err [mj/pulse] Switching loss vs. Gate resistance (typ.) Vcc=6V, Ic=45A, Vge=±5V, Tj=25 C, 5 C 25 2 Tj=5 o C Eon 5 Eoff 5 Err Gate resistance: Rg [Ω] Reverse bias safe operating area (max.) +Vge=5V, Vge 5V, Rg.52Ω, Tj=5 C 2 8 6 4 2 Notice) Please refer to Page 7. There is definision of VCE. 5 5 CollectorEmitter voltage: Vce [V] (Main Terminals) 4
6MBI45V25 Forward Current vs. Forward Voltage (typ.) chip Reverse Recovery Characteristics (typ.) Vcc=6V, Vge=±5V, Rg=.52Ω, Tj=25 C Forward current: If [A] 8 6 4 2 5 C Tj=25 C 25 C Reverse recovery current: Irr [A] Reverse recovery time: r [nsec] Irr r 2 3 Forward on voltage: Vf [V] 2 4 6 8 Forward current: If [A] Reverse Recovery Characteristics (typ.) Vcc=6V, Vge=±5V, Rg=.52Ω, Tj=25 C, 5 C Reverse recovery current: Irr [A] Reverse recovery time: r [nsec] 2 4 6 8 Irr r Tj=5 o C Forward current: If [A] Thermal resistanse: Rth(jc) [ C/W] ***.. Transient Thermal Resistance (max.) τ [sec].232.37.5976.782 Rth IGBT.78.795.2536.562 [ C/W] FWD.73.279.3842.2366.... Pulse Width : Pw [sec] FWD IGBT [THERMISTOR] Temperature characteristic (typ.) FWD safe operating area (max.) Tj=5 C 9 Resistance : R [kω]. 6 4 2 2 4 6 8 2 4 6 Temperature [ C] Reverse recovery current: Irr [A] 8 7 6 5 4 3 2 Notice) Please refer to Page 7. There is definision of VCE. Pmax=45kW 5 5 CollectorEmitter voltage: VCE [V] (Main terminals) 5
6MBI45V25 Outline Drawings(Unit:mm) Weight: 95g (typ.) Equivalent Circuit [ Inverter ] [ Thermistor ] 6
6MBI45V25 Definition of switching characteristics Sence C,3,5 7,8,9,,2 G,3,5 Sence E,3,5 G2,4,6 VCE(terminal) of Upper arm (U,V,W) VCE(terminal) of Lower arm (X,Y,Z) Switching characteristics of VCE is defined between Sense C,3,5 and Sense E,3,5 for Upper arm(u,v,w) and Sense E,3,5 and Sense E2,4,6 for Lower arm(x,y,z). Please use these terminals whenever measure spike voltage. Sence E2,4,6,3,5 WARNING. This Catalog contains the product specifications, characteristics, data, materials, and suctures as of March 25. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sur to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, ade secret or other intellectual property right owned by Fuji Elecic Co., Ltd. is (or shall be deemed) granted. Fuji Elecic Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. a 3. Although Fuji Elecic Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Elecic semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design failsafe, flame retardant, and free of malfunction. 4. The products inoduced in this Catalog are intended for use in the following eleconic and elecical equipment which has normal reliability requirements. Computers OA equipment Communications equipment (terminal devices) Measurement equipment Machine tools Audiovisual equipment Elecical home appliances Personal equipment Indusial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Elecic Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. Transportation equipment (mounted on cars and ships) Trunk communications equipment Trafficsignal conol equipment Gas leakage detectors with an autoshu feature Emergency equipment for responding to disasters and antiburglary devices Safety devices Medical equipment 6. Do not use products in this Catalog for the equipment requiring sict reliability such as the following and equivalents to sategic equipment (without limitation). Space equipment Aeronautic equipment Nuclear conol equipment Submarine repeater equipment 7. Copyright 99625 by Fuji Elecic Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Elecic Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Elecic Co., Ltd. or its sales agents before using the product. Neither Fuji Elecic Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with insuctions set forth herein. 7