Table of Contents. Arctic Equipment Manufacturing Corporation Arctic SD-S
|
|
- Ada McGee
- 5 years ago
- Views:
Transcription
1 Arctic SD-S Table of Contents Arctic Standard Duty Steel Blade 84",90" (Blade, Quadrant, A-frame)...2 Arctic Standard Steel Blade, Quadrant & A-frame Installation...6 QL-MKB...12 QUIK*LINK II-MKB...14 QUIK*LINK II-HI...16 QUIK*LINK III-MKB...18 QUIK*LINK III-MKB-M QUIK*LINK III-HI...24 QUIK*LINK is a trademark of Arctic Equipment Manufacturing Corporation
2 Arctic SD-S M R06 Arctic SD-S Arctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)
3
4 Arctic SD-S M R06 Standard Duty Steel Blade (Blade, Quadrant, A-frame) Galvanized Item Part # Description Quant M-GA 84" Blade Assembly Galvanized (includes blade, shoe, cutting edge) M-GA 90" Blade Assembly Galvanized (includes blade, shoe, cutting edge) M Eye Bolt Assembly B Blade Guide C Trip Spring M Rivet Assembly D-GA Quadrant Galvanized M Lift Chain 30" M Lift Chain 36" D-GA 32" A-Frame Galvanized B-GA Shoe Assembly Galvanized 2 10a B-GA Shoe Galvanized 1 10b A Quick Release Pin 2 10c M Shoe Washer M Carriage Bolt Assembly 8 11a HH G8 Carriage Bolt, ½" -13 X 1 3/4" 1 11b HH Lock Nut 1/2" 1 12 CS NRS 1 ½ x 10 Angle Cylinder 2 13 HH /4"x 3 1/4" Cap screw 3 14 HH /4" -16 Nylon insert locknut A Spreader Pin 2 15a HH Cotter pin N 84" Cutting Edge N 90" Cutting Edge 18 GB001 Guide Bolt Ass y 4
5 Arctic SD-S M R06 Standard Duty Steel Blade (Blade, Quadrant, A-frame) Galvanized Item Part # Description Quant 19 HH /4"x 3 1/2" Cap screw 2 20 HH /4" Hex Nut Nylon Insert 4 22 HH /2"x1.1/2" Cap screw 1 23 HH ½" Lock washer 1 24 HH /2" Hex Nut M Deflector Bolt Kit 84"/90" M Deflector Strap - 84" M Deflector Strap - 90" M Deflector - 84" M Deflector - 90" 1 1
6 Standard steel blade, quadrant & A-frame installation M R06 INST0042 Arctic Standard Steel Blade, Quadrant & A-frame Installation
7 Standard steel blade, quadrant & A-frame installation M R06 INST0042 Installation Instructions 1. Lay blade face down on the floor. Attach quadrant (11) to blade by inserting rivets (3) through the holes in the quadrant lugs and blade ribs. Install the centre one first. Secure the rivets with the cotter pins. 2. Take an eye bolt (1) and screw one nut all the way down the thread. Attach spring (2) to the quadrant and the eye bolt, making sure the open end of the spring faces up on the quadrant. Lift the quadrant and insert the eye bolt through the corresponding hole in the spring plate. Secure the eye bolt with another nut. This will hold the quadrant in an upward position, and ease installation of the remaining two springs and eye bolts. 3. Tighten the eye bolt upper nut until the spring coils just break loose from each other. Secure eye bolts in position by tightening the lower nut against the blade spring plate. 4. Lift chain (4) is attached by inserting a ½" bolt (6) through the last link and in the hole in the A-frame lifting bar. Tighten a ½" nut (7) and lock washer (8) firmly from the face side of the lifting bar. To attach snowplow to vehicle mount, proceed as follows 1. Position the vehicle such that the A-frame lugs and vehicle mount are in vertical alignment. 2. Hook the chain into the lift channel slot. 3. Actuate lift cylinder slowly. Blade will remain on the ground, but the A-frame will begin to rise. Continue until the A-frame lug holes align with the holes on the vehicle mount. 4. Insert the spreader pins (5) through the holes to attach the A-frame to the vehicle mount. Secure attachment by inserting cotter pins (5a) into the spreader pins. 5. With the control switch in the DOWN position, push the lift channel downward as far as possible and adjust the chain so there are two links of slack. 6. Check the cutting edge clearance. Use a combination of spacer washers until ½" clearance between the ground and cutting edge is achieved. Secure shoes by inserting the lynch pins into the shoe.
8 Standard steel blade, quadrant & A-frame installation M R06 INST0042 Arctic Standard Steel blade, quadrant & A-frame installation Galvanized Item Part Number Description Quantity Hardware Kit M Hardware Kit M *Power Angling Assembly M *Power Angling Assembly M- GA M Eye Bolt Assembly (includes eye bolt & 2 5/8" hex nuts) C Trip Spring M 3/4"X3" Rivet Assembly (includes cotter pin) M Chain Quik Link M Chain Standard A Spreader Bar Pin 2 5a HH Cotter pin 2 6 HH ½-20 x 1.1/2 Hex Head Cap Screw 1 7 HH ½-20 Hex Nut 1 8 HH ½ Lockwasher D-GA 32" A-Frame Galvanized D-GA 28" A-Frame Galvanized D-GA Quadrant Galvanized 1 12 CS NRS Angle Cylinder 1 ½" x 10" 2
9 Standard steel blade, quadrant & A-frame installation M R06 INST0042 Arctic Standard Steel blade, quadrant & A-frame installation Galvanized Item Part Number Description Quantity Hardware Kit M Hardware Kit M *Power Angling Assembly M *Power Angling Assembly M- GA 13 HH /4-16 x 3.1/4" Hex Head Cap Screw 2 14 HH /4-16x 3.1/2" Hex Head Cap Screw 2 16 HH /4-16 Hex Nut Nylon Insert 4 17 HH /4-16 Castle Nut 1 18 HH /8Dx2L Cotter Pin A 3/4"x2.1/2" Hinge Bolt 1 *Power Angling Assembly M & M-GA comes assembled from Arctic Equipment.
10
11
12
13 Mounting Kit QL-MKB QL-MKB R05 QL-MKB Mounting Kit Quik-Link I Item Part # Description QL-MKB MKPB 1** C Q-Link I Lift Frame 1 2** C Q-Link I Spreader Bar 3* D Ford Q-Link I Spreader Bar C Lift Channel B Light Brace B Light Antler 1 7 HH ½" x 1½" Cap screw 6 8 HH ½" Lock washer 6 9 HH ½" Hex nut 6 10 HH /4" x 3½" UNF Cap screw 2 11 HH /4" UNF Thin Collar Locknut 3 12 WA Mounting Pin A Quick release pin 2 14* B Guides 2 15 HH /4-16 x 2 1/2" UNF Cap screw 1 Note: * These items are not shown on the drawing. **QLI assemblies are no longer manufactured.
14
15 Mounting Kit QLII-MKB QLII-MKB R07 QLII-MKB-GA Mounting Kit Quik*Link II Galvanized Item Part # Description QLII- MKB- GA MKPB- QLII D-GA QUIK*LINK II Lift Frame Galvanized C-G QUIK*LINK II Spreader Bar Galvanized C-G Ford QUIK*LINK II Spreader Bar Galvanized B-GA Light Brace Galvanized C-GA Lift Channel Galvanized B-GA Light Antler Galvanized 1 7 HH ½" x 1½" Cap screw 6 8 HH ½" Lock washer 6 9 HH ½" Hex nut 6 10 HH /4" x 3½" UNF Cap screw 1 11 HH /4" UNF Thin Collar Locknut A Mounting Pin A Lynch Pin M Jack Assembly 1 * B Guides 2 QUIK*LINK is a trademark of Arctic Equipment Manufacturing Corporation * Note: Item #16 is not shown on drawing. 1
16
17 Mounting Kit QLII-HI QLII-HI R04 QLII-HI-GA Mounting Kit QLII Hi Boy Galvanized Item Part # Description Quantity D-GA Hi-Boy Lift Frame Galvanized M-GA Single lift chain kit Galvanized M-GA Single lift chain kit Galvanized Item Part # Description M-GA C-G QUIK*LINK II Spreader Bar Galvanized * C-G Ford QUIK*LINK II Spreader Bar Galvanized C-GA Lift Channel Galvanized 1 MKPB 6 HH /4" x 3½" UNF Cap screw 2 7 HH /4" UNF Thin Collar Locknut A Spreader Pin A Lynch Pin 2 10 HH /16" x 1 1/4" UNF Hex Cap screw M- GA Pump Kit 11 HH /16" Hex Nut 4 12 HH /16" Lock Washer C-GA Mounting Plate M Jack Assembly 1 * B Blade Guides 2 16 HH /4 x 16 x 2 1/2" cap screw 1 QUIK*LINK is a trademark of Arctic Equipment Manufacturing Corporation Note:* These items are not shown on the drawing. 4
18
19 Mounting Kit QLIII-MKB QLIII-MKB R05 QLIII-MKB-GA Mounting Kit Galvanized Item Part # Description QLIII- MKB-GA MKPB- QLII D-GA Lift Frame Galvanized M Spring Bracket M Handle M Top Plate N Spring B-GA Light Brace Galvanized B-GA Antler Galvanized 1 8* B Blade Marker M Jack Ass y M Spacer C-GA Lift Channel Galvanized M Lock Bracket 1 **13 HH /8-16x1.1/4 Hex Head Cap Screw 2 **14 HH /8-16x1.1/2 Hex Head Cap Screw 3 **15 HH /8-16x2 Hex Head Cap Screw 2 **16 HH /8-16 Nut (Nylon Insert) 7 ** N Hitch Pin 1 **18 HH /4-20 Hex Nut 2 **19 HH /4 Lock washer 2 **20 HH /4-20x1 Hex Head Cap Screw 2 ** M Pin 2 22 HH ½" x 1½" Cap screw 6 23 HH ½" Lock washer 6 24 HH ½" Hex nut 6 25 HH /4" x 3½" UNF Capscrew 1 26 HH /4" UNF Thin Collar Locknut 1 *Note: * These items are not shown on the drawing.
20 Mounting Kit QLIII-MKB QLIII-MKB R05 ** These items are part of M-BB Installation: 1. Install the pin (21) on the end of the handle (3) (install the spacer (10) between the pin (21) and the handle (3)) using 3/8 x 2" bolts and 3/8"nylon lockouts (15) (16). 2. Insert partially assembled handle through the rectangular opening inside of the lift frame (1) and attach spring (5), top plate (4), spring bracket (2) and pin (21) as shown on the drawing. 3. Install the lock bracket (12) using 1/4" bolt (20), lock washer (19) and nut (18). 4. Do not tighten lock nuts (16) attached to the pins completely. Pins must float.
21
22 Mounting Kit QLIII-MKB-M3493 QLIII-MKB-M3493 QLIII-MKB-M3493 Mounting Kit Galvanized Item Part # Description QLIII-MKB- M3493 MKPB-QLII D Lift Frame Galvanized M Spring Bracket M Handle M Top Plate N Spring 1` B-GA Light Brace Galvanized B-GA Antler Galvanized 1 8* B Blade Marker M Jack Ass y M Spacer C-GA Lift Channel Galvanized M Lock Bracket 1 **13 HH /8-16x1.1/4 Hex Head Cap Screw 2 **14 HH /8-16x1.1/2 Hex Head Cap Screw 3 **15 HH /8-16x2 Hex Head Cap Screw 2 **16 HH /8-16 Nut (Nylon Insert) 7 ** N Hitch Pin 1 **18 HH /4-20 Hex Nut 2 **19 HH /4 Lock washer 2 **20 HH /4-20x1 Hex Head Cap Screw 2 ** M Pin 2 22 HH ½" x 1½" Cap screw 6 23 HH ½" Lock washer 6 24 HH ½" Hex nut 6 25 HH /4" x 3½" UNF Capscrew 1 26 HH /4" UNF Thin Collar Locknut M Pin 1
23 Mounting Kit QLIII-MKB-M3493 QLIII-MKB-M3493 QLIII-MKB-M3493 Mounting Kit Galvanized Item Part # Description QLIII-MKB- M3493 MKPB-QLII 28 HH /4" x 4½" UNF Capscrew 1 *Note: * These items are not shown on the drawing. ** These items are part of M-BB Installation: 1. Install the pin (21) on the end of the handle (3) (install the spacer (10) between the pin (21) and the handle (3)) using 3/8 x 2" bolts and 3/8"nylon lockouts (15) (16). 2. Insert partially assembled handle through the rectangular opening inside of the lift frame (1) and attach spring (5), top plate (4), spring bracket (2) and pin (21) as shown on the drawing. 3. Install the lock bracket (12) using 1/4" bolt (20), lock washer (19) and nut (18). 4. Do not tighten lock nuts (16) attached to the pins completely. Pins must float.
24
25 Mounting Kit QLIII-HI QLIII-HI R04 QLIII-HI-GA Mounting Kit Galvanized Item Part # Description Quantity D-GA Lift Frame Galvanized M-GA Single Lift Chain Kit Galvanized M-GA Single Lift Chain Kit Galvanized Item Part # Description Quantity M Spring Bracket M Handle M Top Plate N Spring 1 7* B Blade Marker M Jack Ass y M Spacer C-GA Lift Channel Single Chain Galvanized M Lock Bracket M Pin 2 13 HH /8-16x1.1/4 Hex Head Cap Screw 2 14 HH /8-16x1.1/2 Hex Head Cap Screw 3 15 HH /8-16x2 Hex Head Cap Screw 2 16 HH /8-16 Nut (Nylon Insert) N Hitch Pin 1 18 HH /4-20 Hex Nut 2 19 HH /4 Lockwasher 2 20 HH /4-20x1 Hex Head Cap Screw 2 * Note: Items are not shown on the drawing. Installation
26 Mounting Kit QLIII-HI QLIII-HI R04 1. Install the pin (12) on the end of the handle (4) (install the spacer (9) between the pin (12) and the handle (4)) using 3/8 x 2" bolts and 3/8"nylon lockouts (15)(16). 2. Insert partially assembled handle through the rectangular opening inside of the lift frame (1) and attach spring (6), top plate (5), spring bracket (3) and pin (12) as shown on the drawing. 3. Install the lock bracket (11) using 1/4" bolt (20), lock washer (19) and nut (18). 4. Do not tighten lock nuts (16) attached to the pins completely. Pins must float.
Arctic Equipment Manufacturing Corporation
Arctic SD-P Table of Contents Arctic Standard Duty Poly Blade 84" & 90" (Blade, Quadrant & T-frame)....2 Power Angling Installation..........6 QL MKB.....14 QUIK*LINK II MKB......16 QUIK*LINK II HI...18
More informationArctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)...2. Arctic Standard Steel Blade, Quadrant & A-frame Installation...
Table of Contents for Standard Steel Arctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)...2 Arctic Standard Steel Blade, Quadrant & A-frame Installation...6 Important note: Lift frames
More informationTable of Contents for Heavy duty Steel blade
Table of Contents for Heavy duty Steel blade Arctic Heavy Duty Steel Blade 96", 102, 108" (Blade, Quadrant, A-frame)...2 Shock Absorber Mounting Kit for Arctic Heavy Duty Steel Blade...6 Arctic Heavy Duty
More informationTable of Contents for Standard Duty Poly Blade Arctic Standard Duty Poly Blade 84" & 90" (Blade, Quadrant & T-frame)....2 Important note: Lift frames for this specific blade are listed below: Lift Frame
More informationTable of Contents Heavy Duty Extra Long Poly Blade
Table of Contents Heavy Duty Extra Long Poly Blade Arctic Heavy Duty Poly Blade 90" & 96" (Blade, Quadrant & A-frame)... 2 Power angling installation.....7 Shock absorber installation....12 Pro-Wings installation..
More informationArctic Equipment Manufacturing Corporation Arctic LD-P. Table of Contents
Arctic LD-P Table of Contents Arctic Light Duty Poly Blade 78 & 84" (Blade, Quadrant & T-frame)....2 Installation of the Optional Spring...6 Installation of the Shoe Bracket...10 Power Angling Installation..........13
More informationTable of Contents Heavy Duty V Blade
Table of Contents Heavy Duty V Blade V Blade Assembly...2 Power Angling Assembly...7 V plow flares. 13 Third Spring Installation..16 Lift Frame QLII-HI-DLC-GA...22 Lift Frame QLIII-HI-DLC-GA...25 Lift
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationPRO PLOW, PRO PLOW Series 2, POLY PRO PLOW and POLY PRO PLOW Series 2 Snowplows
Western Products, PO Box 24508, Milwaukee, WI 5224 958 www.westernplows.com May 1, 2014 Lit. No. 69694, Rev. 0 PRO PLOW, PRO PLOW Series 2, POLY PRO PLOW and POLY PRO PLOW Series 2 Snowplows Steel Blades
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART #
INSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART # PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Brackets (for trucks without 22 12mm x 30.1mm OD
More informationINSTALLATION GUIDE N5-DS48-4
INSTALLATION GUIDE N5-DS48-4 Shelving ( steel ) Transit High Roof & Medium Roof Promaster Standard Roof & High Roof Nissan NV High Roof Sprinter Low Roof & High Roof Box Truck / Trailer QUICK START GUIDE
More informationFor additional assistance call
The following pages will help guide you through the process of assembling your new 48 custom prize wheel. Choose an assembly area with plenty of room to lay your pieces on the floor and also a bench or
More informationPRO PLOW and POLY PRO PLOW Snowplows
Western Products, PO Box 245038, Milwaukee, WI 53224 9538 www.westernplows.com May 1, 2014 Lit. No. 6689, Rev. 09 PRO PLOW and POLY PRO PLOW Snowplows Steel Blades 60381, 60390, 60308, 60655 Poly Blades
More informationINSTALLATION GUIDE FTX FLOOR Ford Transit ( 148" Extended Wheelbase )
INSTALLATION GUIDE 6540-FTX FLOOR Ford Transit ( 148" Extended Wheelbase ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... 3-4 Phase 2 - Installation q 2.1 Install Preparation... q 2.2 Floor Installation...
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationWestern Products, PO Box , Milwaukee, WI Blades 64750, 66980, & A&Q 66490; Lift Frame
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com June 15, 2010 Lit. No. 66899, Rev. 08 PRO PLUS Snowplow Blades 64750, 66980, 66974 & 66901 A&Q 66490; Lift Frame 67951-2 Parts
More informationSpareParts Book Rev. 2.0
SpareParts Book Rev. 2.0 Macchina GB Sezione 1 GB_part1 1 GB/T 70.3 2000 Hexagon head screw M10 60 2 2,1 G.FMH150.S 023 Pulley cover weldment 150 1 2,2 G.FMH180.S 023 Pulley cover weldment 180 1 3,1 SPB
More informationWestern Products, PO Box , Milwaukee, WI MIDWEIGHT Snowplow
Western Products, PO Box 245038, Milwaukee, WI 53224 9538 www.westernplows.com May 1, 2014 Lit. No. 64368, Rev. 06 MIDWEIGHT Snowplow Poly Blade 64330, Steel Blade 64340 A&Q 64336, Lift Frame 67992 Parts
More informationService Parts for PRO PLUS Plows
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 www.westernplows.com Lit. No. 66899, Rev. 07 September 1, 2006 Service Parts for PRO PLUS Plows A DIVISION OF DOUGLAS DYNAMICS, L.L.C. ABBREVIATIONS
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More information4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
More informationHopper and Drive Components
February, 07 Lit. No. 770, Rev. 0 Hopper and Drive Components Model TS-00- & TS-00-EG- Low-Profile Tailgate Spreader Parts List This manual is for TurfEx TS-00- & TS-00-EG- tailgate spreaders with serial
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationOWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. -0301 CAUTION: Read Rules for Safe Operation and Instructions Carefully 17 LB. POLY PRO SPIKER/SPREADER Safety Assembly Operation Maintenance Parts PRINTED IN U.S.A. FORM NO. 78
More informationOPERATOR'S MANUAL 46" SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.
More informationSafety Instructions, Installation & Operator's Manual For. # CLAMSHELL GRASS CA TCHER KIT For 28" & 33" REAR ENGINE RIDING MOWERS
Safety Instructions, Installation & Operator's Manual For #6-3125 CLAMSHELL GRASS CA TCHER KIT For 28" & 33" REAR ENGINE RIDING MOWERS 28" REAR ENGINE RIDER WITH CLAMSHELL BAGGER KIT SHOWN SNAPPER, McDonough,
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationINSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationINSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 "HERITAGE" F-150/250LD 2WD, 97-04, 04 "HERITAGE" 4WD WD EXPEDITION/ WD EXPEDITION PART
INSTALLATION INSTRUCTIONS 3 BULL BAR PART #B-F1971;B-F2971 PARTS LIST: 1 Bull Bar 2 12-1.75mm x 130mm x 40mm Hex Bolts 1 Driver/Left Mounting Bracket 4 12-1.75mm x 35mm Hex Bolts 1 Passenger/Right Mounting
More informationINSTALLATION INSTRUCTIONS
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: 17A110200MSS\17A110200MA MODULAR GRILL GUARD FOR NISSAN FRONTIER 05-10//PATHFINDER 05-07 1 guard, center section 1 brush guard, left side 1 brush guard,
More informationELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service:
ELSTON Gopher Getters Parts List for GA-00 and GA-00 Another Quality Product of: Please Contact Us for Parts and Service: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SNO-WAY SPREADERS 4 CUBIC FOOT 6 CUBIC FOOT & 9 CUBIC FOOT 01 Sno-Way International 91019B TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... HOPPER FRAME - 4 CUBIC FOOT (For Serial
More information2-PIECE STAIRWAY ASSEMBLY
REVISED 2/12/15 2-PIECE STAIRWAY ASSEMBLY STEP 1: LAY OUT THE RIGHT AND LEFT SIDE TOP AND BOTTOM RISER PANELS AS SHOWN IN FIGURE 1. BOLT THE SPLICE PLATE (#15114C for OSHA F SERIES; #15412C for BOCA U
More informationOPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER Read and understand this material before operating or servicing this bender. Failure to understand how to safely
More information(2) Plastic Plugs (2) Frame Bracket. Spacers. License Plate Bracket. (2) 12mm Single Bolt Plates. (2) 12mm Double Bolt Plates
LDB-CSIL26-FB PARTS LIST: 1 LD1 Bumper Assembly 10 12mm Hex Nuts 1 Driver/left Frame Mounting 6 10-1.5mm x 35mm Hex Bolts 1 Passenger/right Frame Mounting 12 10mm x 27mm OD x 3mm Flat Washers 2 Spacers
More informationINSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02
INSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert,
More informationParts Manual 2200 Bale Hiker
Parts Manual 2200 Bale Hiker Part Number K56202-02B IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the
More informationHopper and Drive Components
January, 07 Lit. No. 7586, Rev. 00 Hopper and Drive Components Model SP-00- & SP-5- Low-Profile Tailgate Spreader Parts List This manual is for SnowEx SP-00- & SP-5- tailgate spreaders with serial numbers
More informationStrata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
More informationINSTALLATION INSTRUCTIONS
Do not attempt to install this product on any vehicle other than the one it is designed for and listed above! Parts List 10 3/8 X 1 1/4 Hex Bolt 10 3/8 Lock Washer 4 3/8 Hex Nut 4 3/8 Flat Washer 2 3169)
More informationFORD Ford Aerostar Van (extended only) Ford Bronco Ford Bronco II Ford Ranger P/U (except Flareside)
June 2007 INSTALLATION INSTRUCTIONS Rev. 1 MODEL NO. 82650 APPLICATION: CHEVROLET/GMC 1992-94 Chevrolet Blazer (full size) 1996-04 Chevrolet/GMC Van (full size) 1983-04 Chevrolet S-10 P/U (short bed, EXC
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For Chevrolet Silverado 1500HD & 2500 Kit 68162 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of
More informationFORD MOUNT INSTALLATION INSTRUCTIONS
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 67449 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco, F-150/250/350 4X4 1992-1996 and Ford F-250 2WD (over 8,500 GVWR) Ford F-350 2WD (over
More informationHardware and Components:
Hardware and Components: (A) 5/16 x 2 Hex Bolt (B) 5/16 x 2-1/4 Hex Bolt (C) 5/16 x 2-1/2 Hex Bolt (D) 4X 5/16 x 3/4 Hex Bolt (E) 4X 5/16 x 1-1/4 Hex Bolt (F) 11X 5/16 Flat Washer (G) 12X 5/16 Nylock Nut
More informationHopper and Drive Components
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com September 1, 2015 Lit. No. 43772, Rev. 00 Hopper and Drive Components PRO-FLO 525 Low-Profile Tailgate Spreader Parts List
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS PLATINUM 4 OVAL STEP BAR (90 BENT END) APPLICATION: 2010-2015 Dodge Ram 2500/3500 Mega Cab PART NUMBER: 21-3570, 21-3575, 23-3570, 23-3575, 25-3570, 25-3575,
More informationPPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
More informationHiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA
VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:
More information3,500/4,500lb. Vertical Cable Feighner Lift
3,500/4,500lb. Vertical Cable Feighner Lift CAUTION - PUT SAFETY FIRST 1. Before attempting to install or operate this lift, study and fully understand the proper operating procedures and safety precautions
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152 September 1, 2015 Lit. No. 43774, Rev. 00 Hopper and Drive Components SPEED-CASTER 525 Low-Profile Tailgate Spreader
More information55000/55010 Installation Instructions
A. Install 55015 B. Bolt roof rails, 55020/55025, to front hoop. C. Assemble 55026 D. To install without drilling into bumper. E. If mounting directly to bumper. A. 55015 Installation Instructions 55000/55010
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More informationIN20733 Rev. B 1/06/2016
14,000 LBS. (6350 Kg.) Bolt-on Alignment Kit Installation Instructions S100129, S100130, S100131 S100132, S100133, S100134 S100135, S100136, S100137, S100173, S100174 Model Max Wheel Base Max 2 Wheel Alignment
More informationMANUFACTURING INC. 706 N
ELSTON Gopher Getters Parts List for GA-00 & GA-00 Please Contact Us for Parts and Service: Another Quality Product of: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8
More informationMM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationOPERATIONAL MANUAL V1.0. Removing/Replacing Blades
OPERATIONAL MANUAL V1.0 BLUEROCK WS-212 Wire Stripper Removing/Replacing Blades CAUTION!! IMPORTANT!! DANGER!! WARNING!! DISCONNECT MACHINE FROM POWER BEFORE PROCEEDING!! Estimated Completion Time: 90
More informationTYGER ARMORTM. Parts List BEFORE INSTALLATION WARNING. Customer Support TG-AM2C /8. x1 Driver/Left Side Armor
TYGER ARMORTM TG-AM2C20028 Customer Support Parts List x1 Driver/Left Side Armor BEFORE INSTALLATION READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS
More informationLORON SERVICE MANUAL / PARTS LIST SINGLE DOUBLE PALLET HANDLER CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures
LORON SERVICE MANUAL / PARTS LIST SINGLE DOUBLE PALLET HANDLER CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures 2 Mounting Options Stop Block Adjustments 3 General Weekly Inspection
More informationInstruction Guide 4A90L
Instruction Guide 4A90L Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS
More informationMODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
More informationTEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER PART # 17FJ26MA
\ TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER 02-05 PART # 17FJ26MA NOTE: Please read this information before assembling. Complete step by step instruction sheets will be
More informationINSTALLATION INSTRUCTIONS 3 ROUND & 4 OVAL SIDEBAR (90-DEG BENT END) DODGE RAM MEGA CAB PART NUMBER SB1214S SB1214B
INSTALLATION INSTRUCTIONS PART NUMBER SB1214S SB1214B PARTS LIST: Qty Description Qty Description 1 Driver/Left Sidebar 4 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Sidebar 4 12mm Lock Washers
More informationINSTALLATION GUIDE Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum )
INSTALLATION GUIDE 7115 Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Locker w/ Top Shelf Assembly... 3-5 6-13 Phase
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationBolt Together Pump/Screw Together Frame Conversion Kit
Instruction Sheet P/N Bolt Together Pump/Screw Together Frame Conversion Kit 1. Description The bolt together pump/screw together frame conversion kit changes your Rhino unloader from a 3-post screw together
More informationAssembly Instructions
Assembly Instructions * Pro Version shown Platform - Safety Rail Assembly Platform - Safety Rail Assembly IMPORTANT: To avoid assembly problems follow these instructions exactly. Note: If assembling the
More information40670 Transit Connect/NV200/City Express/ProMaster City Partition
40670 Transit Connect/NV200/City Express/ProMaster City Partition Top Panel (1) Bottom Panel (1) Transit Connect (2014) Top Angle (1) TC Top MNT BRKT (2) TC Bottom MNT PLT (2) NV200/City Express Top Mount
More information3/8-16 x 3/4 cap screw. 3/8-16 hex nut for above screws. 1/4-20 x 3/4 socket cap screw. 3/16 short arm hex key (not to scale)
Super Slab Roller 24, 30 and 36 models Worktable Assembly Directions P.O. Box 89 Cheney, WA 99004 USA 509.235.9200/800.23.7896 Fax: 509.235.9203 www.northstarequipment.com Revised September, 2006. All
More information400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS
12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationAPPLICATION: Installation No. Installation No.
June 2007 INSTALLATION INSTRUCTIONS MODEL NO. 82650 WARNING: Although this hitch is designed to safely tow its rated load, we recommend that you consult your vehicle owner's manual for possible manufacturer's
More informationThis manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4
More information3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6
2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and
More informationAttachment Kit Ford 250 4x4 Super Duty Early 350 4x4 Super Duty Early 450 Super Duty Early 550 Super Duty Early
Fisher Engineering P.O. Box 529 Rockland, Maine 04841 September 2, 2005 Lit. No. 22303, Rev. 05 S Y S T E M Attachment Kit Ford 250 4x4 Super Duty 1999-04 Early 350 4x4 Super Duty 1999-04 Early 450 Super
More information6625 WEST WILSHIRE BLVD. OKLAHOMA CITY, OK (405) FAX (405)
INSTALLATION INSTRUCTIONS FOR THE TAILGATE WITH LATCH AND LINK ASSEMBLY 76-87 FORD SHORT & 53-87 FORD LONG FLARESIDES 1. Assemble the bed and make sure the box is square. Measure the distance between the
More informationSAVVY OFF ROAD GAS TANK SKID INSTALLATION INSTRUCTIONS
It is best to work with a fuel tank that has the least amount of fuel in it as possible. Thank you for purchasing the best skid on the market. Please follow these instructions and your installation should
More information3000 SERIES STEPGUARD
3000 SERIES STEPGUARD COMPLETE GRILLE & BRUSH GUARD ASSEMBLY INSTRUCTIONS PART NO. 3293MB, 3293MC & 7293MPS 2009 FORD F-150 2/4WD Do not attempt to install this product on any vehicle other than the one
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-29 www.fi sherplows.com 96001 November 1, 20 Lit. No. 95921, Rev. 06 Hopper and Drive Components POLY-CASTER Hopper Spreader Parts List This Parts
More informationKIT. Assembly Instructions. HayDay, LLC
KIT Assembly Instructions HayDay, LLC 1-800-732-1654 www.stablegrazer.com Read completely through the assembly instructions before starting assembly. The Stable Grazer Kit comes in two boxes. Remove all
More informationINSTALLATION INSTRUCTIONS Product No. MULTI-FIT PICK-UP
INSTALLATION INSTRUCTIONS Product No. You can take it with you. PLYMOUTH, MICH. MULTI-FIT PICK-UP 37034 SMALL PARTS PACKAGE 37424 WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY OCCUR DUE TO OVER TIGHTENING.
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 0441-2139 www.fi sherplows.com 96001 March 15, 2019 Lit. No. 9544, Rev. 10 Hopper and Drive Components POLY-CASTER Hopper Spreader Parts List This Parts
More informationStrata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box:
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached
More informationINSTALLATION INSTRUCTIONS ATV PLOW Mount Kit: PN Application: Sportsman 400, Magnum 425
INSTALLATION INSTRUCTIONS ATV PLOW Mount Kit: PN 37845 Application: 1996-97 Sportsman 400, 1997-98 Magnum 425 Your safety, and the safety of others, is very important. To help you make informed decisions
More informationPRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
More informationAttachment Illustrated Parts List
Attachment Illustrated Parts List Attachment Mfg. No. Description 1695168 Catcher, Clean Sweep Twin, 38" MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Part No.:
More informationThank you for purchasing out product! *Please read these instructions and follow them step by step. *
Page 1 of 7 AD17 AA DS 4 X 16 T12 Thank you for purchasing out product! *Please read these instructions and follow them step by step. * STEP 1. Slide two support posts (REF. # 24) into the two outside
More informationBABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms
BABY WOLF LOOM Assembly Instructions for Knocked-Down Looms BEFORE YOU BEGIN Please read through the directions before beginning to assemble your loom. Unpack the loom parts carefully. Do not throw away
More informationFOLDING TONNEAU RACK. 1. Rack Rail Assembly
FOLDING TONNEAU RACK Package Contents (2) Load Bars (4) Load Bar End Caps (4) ¼-20 x 9/16 Narrow Shoulder Hex Head Screw (28) ¼ Flat Washers (24) ¼ Split Lock Washers (20) ¼-20 x ¾ long Button Head Screws
More informationLB. POLY PRO DROP SPREADER
owners manual Model No. -02882 17 LB. POLY PRO DROP SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts
More informationBallpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual
Ballpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual P a g e 2 Table of Contents Cover Page 1 Table of Contents 2 Welcome to Bannerman 3 Warranty 4 General Information & Tool Functions 5 How to
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More information