Evidence of Performance Watertightness Air permeability Operating forces

Size: px

Start display at page:

Download "Evidence of Performance Watertightness Air permeability Operating forces"

Susan Bailey
5 years ago
Views:

Evidence of Performance Watertightness Air permeability Operating forces Test Report 102 44177/1e Translation of Test Report 102 44177/1 dated 4 August 2010 Client Product VBH Holding AG Siemensstr.

2011 Laminated wood profiles (pine) greenteq Flügelfalzdichtung 12 TPE, Supplier VBH Holding AG Operating forces EN 13115 Class 1 Air permeability EN 12207 Class 4 Watertightness EN 12208 Class 9A

report serves to demonstrate the above characteristics of windows according to EN 14351-1 : 2006-03.

Validity The data and results refer solely to the tested and described specimen.

1 Evidence of Performance Watertightness Air permeability Operating forces Test Report /1e Translation of Test Report /1 dated 4 August 2010 Client Product VBH Holding AG Siemensstr Korntal-Münchingen Single tilt and turn window System VBH 68 Overall dimensions (W x H) 1,230 mm x 1,480 mm Frame material Special features - / - Sealing profile/gasket ift Rosenheim 3 March 2011 Laminated wood profiles (pine) greenteq Flügelfalzdichtung 12 TPE, Supplier VBH Holding AG Operating forces EN Class 1 Air permeability EN Class 4 Watertightness EN Class 9A Basis EN : Test standard/s: EN : EN 1026 : EN 1027 : Test Report dated 4 November 2009 Representation Instructions for use The present test report serves to demonstrate the above characteristics of windows according to EN : For the purpose of clarification it can be used as the basis for the manufacturer ITT report summary for attestation of conformity procedure 3 to justify the manufacturer's declaration of compliance. Validity The data and results refer solely to the tested and described specimen. Subject to compliance with the relevant casement weights the test results can be extrapolated for identical or smaller dimensions with the same design, rebate, mode of operation and similar shape. The test does not allow any statement to be made on any further characteristics of the present structure regarding performance and quality, in particular the effects of weathering and ageing. Jörn Peter Lass, Dipl.-Ing. (FH) Head of Testing Department Building Components Frank Zirbel, Dipl.-Ing. (FH) Operating Testing Officer Tightness & Wind Load Notes on publication The ift-guidance Sheet Conditions and Guidance for the use of ift Test Documents" applies. The cover sheet can be used as an abstract. Contents The report contains a total of 8 pages

2 Page 2 of 8 1 Object 1.1 Description of test specimen - window Product single tilt and turn window Manufacturer Schreinerei Ulrich Reuter, an der Rohrach 36, Treuchtlingen Wettelsheim Date of manufacture 18 September 2007 System VBH 68 Type of opening / opening directions tilt and turn / DIN right, opening inwards Frame material laminated wood profiles (pine) Overall frame dimensions (W x H) 1,230 mm x 1,480 mm Overall casement dimensions (W x H) 1,156 mm x 1,390 mm Casement weight 39.9 kg Frame member 80 / 68 mm, rebate air 12 mm, Euro-rebate 24 mm, hardware centre line axis 13 mm, overlap 20 mm, see drawings 2 and 3 Frame joint mortise and tenon, 2 ½ tenon groove Casement member 79 / 68 mm, see drawing 2 and drawing 3 Frame joint mortise and tenon, 2 ½ tenon groove Rebate design Rebate drainage without drainage system drainage via water drip groove/cut and drainage slope, Rebate seal centre (material, corner design, manufacturer) Rebate seal internal (material, corner design, manufacturer) Pressure equalisation see drawing 2 and drawing 3 prefabricated sealing profile, greenteq Flügelfalzdichtung 12 TPE, TPE, supplier VBH Holding AG, continuously notched, at top centre butt-jointed without sealing profile through 0.5 mm gap between frame member and casement member Infill panel insulating glass unit, configuration 4 float / 16 cavity / 4 float mm Incorporation of infill panel gunned sealant, continuous, silicone, Type Perennator FA 101, Glazing gasket (material, manufacturer Tremco illbruck GmbH & Co. KG manufacturer, corner design) preformed strip 2 mm, Type L 1680 S, supplier VBH Deutschland external GmbH Glazing gasket (material, gunned sealant, continuous, silicone, Type Perennator FA 101, manufacturer, corner design) manufacturer Tremco illbruck GmbH & Co. KG internal glazing beads concealed, nailed, at corners mitred, glazing rebate platform continuously gunned with sealant Vapour pressure equalisation 4 openings 12 x 5 mm, per mortise and tenon joint Hardware Type / Manufacturer tilt and turn hardware Maco Multi Trend, Mayer & Co Beschläge GmbH Hinges / bearing 1 corner pivot, 1 tilt mechanism pivot Number of locks on lock side 3, on hinge side 2, at top 1, at bottom 2 Maximum locking distance 720 mm Position of locks Neutral

3 Page 3 of Representation of test specimen The constructional details were checked solely for the characteristics to be classified. The drawings are based on unchanged documentation provided by the original client. Drawing 1 Representation of test specimen, view

4 Page 4 of 8 Drawing 2 Representation of test specimen, vertical section

5 Page 5 of 8 Drawing 3 Representation of test specimen, vertical section

6 Page 6 of 8 2 Procedure 2.1 Sampling The test specimens were selected by the original client. Number 1 Delivered on by the original client Registration No / Method/s Basis EN : EN 1026 : EN 1027 : Classification standards EN : EN : EN : Boundary conditions Deviation Operating forces Test method Part 1: Windows Windows and Doors Air permeability Test method Windows and Doors Watertightness Test method Windows Classification of mechanical properties Racking, torsion and operating forces Windows and Doors Air permeability Classification Windows and Doors Watertightness Classification as specified by the standard requirements There were no deviations from the test methods and test conditions, respectively. 2.3 Test equipment Window test bench Device No.: Torque meter Device No.: Testing Date/Period February December 2008 Test engineer/s M. Eng. Dipl. Ing. (FH) Torsten Voigt M. Eng. Dipl. Ing. (FH) Michael Breckl-Stock

7 Page 7 of Test sequence No. Type of test Test standard Classification standard 1. Operating forces EN EN Air permeability EN 1026 EN Watertightness EN 1027 EN 12208

8 Page 8 of 8 3 Detailed results 3.1 Sealing profile Type greenteq Flügelfalzdichtung 12 TPE, supplier VBH Holding AG

MULTI ZERO locking hook for zero barrier threshold systems

TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI ZERO locking hook for zero barrier threshold systems Only for use by certified specialists! Not for end users! TILT AND TURN HARDWARE Key Sash