Fastener and Sealant Selector Guide Kingspan BENCHMARK Envirodek
|
|
- Lesley Cannon
- 5 years ago
- Views:
Transcription
1 Fastener and Sealant Selector Guide
2 Fastener and Sealant Selector Guide Contents Products for specific applications Pages 3-7 Accessories Page 8 Technical data Page 9-12 Technical Notes Page 13 Maximum reliability. Minimum fuss. 2
3 Envirodek system: Primary fixing to cold rolled steel. Use DrillFast fasteners with SP-40-DD dished washer. 8mm hex head, use Fixfast GreenDrive for stainless fasteners and Fixfast YellowDrive for carbon fasteners. Panel core thickness Total panel thickness Fastener code stainless Fastener code carbon DF3-SS-HT-5.5 x 225 DF3-HT-5.5 x DF3-SS-HT-5.5 x 275 DF3-HT-5.5 x DF3-SS-HT-5.5 x 275 DF3-HT-5.5 x 250 Code for the dished washer: SP-40-DD Please specify the above and add to the fastener code when ordering. For fixing panels back to timber, please contact Fixfast Customer Service team on Envirodek system: Primary fixing to hot rolled steel. Use DrillFast fasteners with SP-40-DD dished washer. 8mm hex head, use Fixfast GreenDrive for stainless fasteners and Fixfast YellowDrive for carbon fasteners. Panel core thickness Total panel thickness Fastener code stainless Fastener code carbon DF12-SS-HT-5.5 x 250 DF12-HT-5.5 x DF12-SS-HT-5.5 x 300 DF12-HT-5.5 x DF12-SS-HT-5.5 x 300 DF12-HT-5.5 x 305 Code for the dished washer: SP-40-DD Please specify the above and add to the fastener code when ordering. For fixing panels back to timber, please contact Fixfast Customer Service team on sales@fixfast.com Orderline:
4 Envirodek system: Primary fixing to very heavy steel. Use DrillFast Stainless fasteners with SP-40-DD dished washer. 8mm hex head, use Fixfast GreenDrive Panel core thickness Panel overall thickness Fastener code DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x 325 Code for the dished washer: SP-40-DD Please specify the above and add to the fastener code when ordering. For fixing panels back to timber, please contact Fixfast Customer Service team on stitching option 1 Envirodek system: Stitching fastener for side laps. Option 1: Use Global CLS fastener. Countersunk head, 2SQ recess, use Fixfast 2SQ drivebar. Panel overall thickness Fastener code 174 CLS-5.2 x CLS-5.2 x CLS-5.2 x 250 4
5 - stitching option 2 Envirodek system: Stitching fastener for side laps. Option 2: Use DrillFast and Global stitching fasteners. Low profile head, use Fixfast RedDrive for stainless steel low profile fasteners. Low profile head, use Fixfast RedDrive for carbon steel low profile fasteners. Oval TX25 head, use Fixfast TX25 drivebar for Global stainless and carbon fasteners. Fastener code stainless BS-A4-4.8 x 60 (top sheet) DF2-SS-PL-A x 25 (bottom sheet) Fastener code carbon BS-5.8 x 55 (top sheet) DF3-DPL-A x 25 (bottom sheet) sales@fixfast.com Orderline:
6 Envirodek system: Air seal to panel side joint. Use Seelex BR gun grade solvent release bedding sealant Sealant Code Cartridge size (ml) Cartridges per carton Colour SEELEX-BR Dark grey or white Envirodek system: Butyl strip sealant for end and side laps. Use A Class butyl strip sealant Sealant Code Thickness x Width (mm) Roll length (m) Box Quantity A-5 x 6 x x Envirodek system: Fire rated seal for side laps. Use Seelex FR fire rated sealant Sealant Code Cartridge size (ml) Cartridges per carton Colour SEELEX-FR White 6
7 Envirodek system: Fire rated foam insulation. Use Firefoam B1 Code Cartridge size (ml) Fitting Box Quantity FIREFOAM-B1-GUN 750 Screwtop 12 FIREFOAM-B1-HAND 750 Manual 12 Envirodek system: PVC foam tape for all internal air sealing. Use PVC foam air sealing tape Sealant Code Thickness x Width (mm) Roll length (m) Box Quantity AST-20 x 6 x x Envirodek system: EPDM foam filler blocks. Use EPDM foam fillers Also available in fire resistant material as well as standard - please enquire for details Code E-25 KINGSPAN ENVIRODEK sales@fixfast.com Orderline:
8 - Accessories GreenDrive One-piece drive socket for DrillFast stainless fasteners, supports the head for easy accurate driving Product Code: GREENDRIVE YellowDrive One-piece drive socket for DrillFast carbon fasteners, supports the head for easy accurate driving Product Code: YELLOWDRIVE RedDrive One-piece drive socket for DrillFast low profile fasteners, supports the head for easy accurate driving Product Code: REDDRIVE 2SQ Drivebar One-piece drivebar for Global fasteners, supports the head for easy accurate driving Product Code: 50-2SQ TX25 Drivebar One-piece drivebar for Global fasteners, supports the head for easy accurate driving Product Code: 50-TX25 Many other tools and accessories are available. Please see the current Fixfast Product Directory, go to or ask the Fixfast customer service team. 8
9 Fastener Data DF3-SS-HT-5.5 Range stainless steel (304M), with steel case hardened welded point 1.2mm 3.0mm steel 1.2mm steel 2.0mm steel 3.0mm steel Softwood 35mm embedment 1.30 kn 2.62 kn 4.76 kn 3.57 kn DF3-HT-5.5 Range Steel SAE1022 case hardened 1.2mm 3.0mm steel 1.2mm steel 2.0mm steel 3.0mm steel Softwood 35mm embedment 1.52 kn 3.01 kn 5.42 kn 3.57 kn DF12-SS-HT-5.5 Range stainless steel (304M), with steel case hardened welded point 4.0mm 12.0mm steel 4.0mm steel 6.0mm steel 8.0mm steel 12.0mm steel 2.08 kn 3.09 kn 6.89 kn 6.89 kn Orderline:
10 Fastener Data DF12-HT-5.5 Range SAE1022 steel case hardened 4.0mm 12.0mm steel 4.0mm steel 6.0mm steel 8.0mm steel 12.0mm steel 5.44 kn kn kn kn DF25-SS-HT-6.3 Range stainless steel (304M), with steel case hardened welded point 8.0mm 25.0mm steel 8.0mm steel 12.0mm steel 25.0mm steel kn kn kn CLS-5.2 x 200 Steel SAE1022 case hardened 0.5mm 2.0mm S275 steel TBC TBC 10
11 Fastener Data BS-5.8 x 55 SAE1022 steel case hardened 0.5mm 2.0mm S275 steel TBC TBC BS-A4-4.8 x 60 A4 stainless steel, with SAE1022 steel case hardened welded point 0.5mm 2.0mm S275 steel TBC TBC sales@fixfast.com Orderline:
12 Fastener Data DF3-DPL-5.5 x 25 SAE1022 steel case hardened 1.8mm steel 0.5mm steel 1.2mm steel 2.0mm steel 3.0mm steel 0.68 kn 1.52 kn 3.01 kn 5.42 kn DF2-SS-PL-6.3 x stainless steel (304M), with steel case hardened welded point 1.8mm steel : 0.5mm steel Fastener DF2-SS-P(L)-6.3 X kn 12
13 Technical Notes Fastener Data All dimensions are subject to manufacturing tolerances. Performance values are averaged ultimate failure values and appropriate safety factors should be applied in any calculations using these values. Fastener Selection Recommended fastener lengths are calculated using standard tolerances for the fasteners and the combination of materials in the build-up. If there is distortion in the supporting construction, or other non-standard application detail, longer fasteners may be necessary than those shown. Always check the actual circumstances before deciding on a particular length. Further Assistance For any enquiry, or to discuss your requirements with someone knowledgeable, call the Fixfast customer service team on Full literature is available for the Fixfast range, or visit Other performance data may be available on request. For more unusual applications, tests can be carried out in our in-house technical centre to provide the necessary data. Site visits are also possible, particularly for pull-out performance into concrete, masonry or other variable substrates. Please ask for a Site Visit Request form if you think this service would be useful. CAD files of fasteners are available on request for inclusion in drawings. The information contained in this document is based on the specification of the Kingspan BENCHMARK Envirodek system and Fixfast s product data. It is provided in good faith but Fixfast cannot be held liable for any errors. Performance is dependent on adherence to the conditions and instructions contained in Fixfast s Technical Data Sheets for the products shown. Performance values should be approved by a qualified engineer, and Fixfast recommend preliminary tests for any application where variation is possible in the materials or substrates involved. sales@fixfast.com Orderline:
14 Notes 14
15 Notes Orderline:
16 Fixfast Product Ranges Fastener Systems Adhesive Systems Roof Drainage Systems Rooftop Products Height Safety and Access Systems Sealing Products Waterproofing Products Specialist Tools Ask for literature, or contact your Account Manager Printed using paper from well managed forests. FIXFAST LTD Merlin House Seven Mile Lane Borough Green Sevenoaks Kent TN15 8QY Enquiries Orderline International +44 (0) Fax Certificate Number ISO 9001: 2008 ISO 14001: 2004 BS OHSAS 18001: 2007 Fixfast is a trading name of Fixfast Ltd which is a company registered in England & Wales with number The registered office is Fixfast, Merlin House, Seven Mile Lane, Borough Green, Sevenoaks, Kent, United Kingdom TN15 8QY FIXFAST June Issue no. 1:4
Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner
Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner Kingspan BENCHMARK Roofliner Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-7 Accessories Page 8
More informationFastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One
Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One Trimo Qbiss One Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-6 Technical data Page 7-8 Technical
More informationMaximum reliability. Minimum fuss. Selector Guide. BENCHMARK Roofliner. Kingspan. Fastener Systems and Sealing Products
Maximum reliability. Minimum fuss. Selector Guide BENCHMARK Roofliner Kingspan Fastener Systems and Sealing Products Contents Products for Specific Applications 3-7 Accessories 8 Technical Data 9-10 Technical
More informationFastener Selector Guide Standing seam systems
Fastener Selector Guide Standing seam systems Fastener Selector Guide Contents Products for specific applications Pages 3-8 Halter applications Fixing to steel or aluminium 0.5mm - 1.0mm thick Tri-Grip
More informationFastener Selector Guide Bemo standing seam system
Fastener Selector Guide Bemo standing seam system Fastener Selector Guide Contents Products for specific applications Pages 4-9 Technical data Pages 10-13 Accessories Page 13 Technical notes Page 14 Bemo
More informationTechnical Data. DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners. Stainless steel self-drilling fasteners for roofing and cladding
DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners Stainless steel self-drilling fasteners for roofing and cladding Application For mechanically fixing metal sheeting systems to light metal purlins
More informationTechnical Data. DrillFast Stainless DF12-SSA4 Standard Fasteners. Stainless steel self-drilling fasteners for roofing and cladding
DrillFast Stainless DF12-SSA4 Standard Fasteners Stainless steel self-drilling fasteners for roofing and cladding Application For mechanically fixing steel sheeting systems to heavy steel purlins and sections.
More informationTrapezoidal Roof KS1000 RW Installation Guide
Insulated Roof & Wall Panels UK & Republic of Ireland Trapezoidal Roof KS1000 RW Installation Guide Multiple Panels Eaves to Ridge 150mm End Lap September 2018 Trapezoidal Roof KS1000 RW Components Trapezoidal
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More informationKS42 MF SERIES - HORIZONTAL INSTALLATION
CI-DS-01-KSMF H CI-PJ-01-KSMF H CI-PJ-02-KSMF H CI-PJ-03-KSMF H CI-PJ-04-KSMF H CI-PJ-05-KSMF H CI-PJ-06-KSMF H CI-PJ-07-KSMF H CI-PJ-08-KSMF H CI-PJ-09-KSMF H CI-PJ-10-KSMF H CI-PJ-11-KSMF H CI-PJ-12-KSMF
More informationRPI ROYAL EDGE EPDM MATERIAL GLOSSARY & GUIDE
RPI ROYAL EDGE EPDM MATERIAL GLOSSARY & GUIDE WHITE EPDM MEMBRANE TPO MEMBRANE WHITE EPDM MEMBRANE TPO MEMBRANE Multi-System Products: W TPO Cured field membrane used for waterproofing sidewalls, flat
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationDW VERTICAL INSTALLATION
AR-PJ-01-DW5V AR-PJ-02-DW5V AR-PJ-03-DW5V AR-PJ-04-DW5V AR-BS-01-DW5V AR-BS-02-DW5V AR-OC-01-DW5V AR-OC-02-DW5V AR-OC-03-DW5V AR-IC-01-DW5V AR-IC-02-DW5V AR-IC-03-DW5V AR-FO-01-DW5V AR-FO-02-DW5V AR-FO-03-DW5V
More information900 SERIES PANEL SHEET INDEX STAGGERED ENDLAP STAGGERED MALE LEG AT ENDLAP CONTINUOUS FEMALE ENDLAP INSTALLATION SEQUENCE CI-WR
900 SERIES PANEL CI-DS-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-EL-01-900 CI-EL-02-900 CI-EL-03-900 CI-EL-04-900 CI-EL-05-900 CI-EL-06-900 CI-EL-07-900 CI-EL-08-900 CI-RD-01-900 CI-RD-02-900 CI-RD-03-900 CI-EV-01-900
More informationFlushglaze For Framed Openings and Horizontal Panels. Window System Installation Guide
Flushglaze 4500 For Framed Openings and Horizontal Panels Window System Installation Guide January 2017 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal panels
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More information400 SERIES VERTICAL INSTALLATION
CI-DS-01-400V CI-PJ-01-400V CI-PJ-02-400V CI-PJ-03-400V CI-BS-01-400V CI-BS-02-400V CI-BS-03-400V CI-BS-04-400V CI-BS-05-400V CI-OC-01-400V CI-OC-02-400V CI-IC-01-400V CI-IC-02-400V CI-FO-01-400V CI-FO-02-400V
More informationICOPAL SP1 CLAMPING RING OUTLET
V1.2 ICOPAL SP1 CLAMPING RING OUTLET For use with Icopal Single-Ply Membranes Monarplan PVC, Sureplan FPO and Universal POCB CONTENTS CONTENTS... 1 OVERVIEW... 2 PREPARATION... 4 WARM DECK ROOFS ICOPAL
More informationFor. Metal Roofing. Cement Roofing. Metal Framing & Fixing. Concrete Fixing
Metal To Metal Fixing Calcium Silicate Boards Metal To wood Fasteners For Concrete Metal Roofing & Cladding For Metal Roofing Fixing AHU & Ventilators Doors & Window Framing Cement Roofing Metal Framing
More information3.4 Wall Flashing Wall Flashing General
3.4 Wall Flashing 3.4.1 Wall Flashing General The wall flashing details are in line with the two methods of base tie-in, previously described. Either the field membrane has to be spliced onto the QuickSeam
More informationPRICE LIST - 6th February 2017
W: www.cladco.co.uk E: info@cladco.co.uk T: 01837 659901 F: 01837 659902 Cladco Profiles North Road Industrial Estate, North Road, Okehampton, Devon, EX20 1BQ. PRICE LIST - 6th February 2017 Colour coated
More informationThermoSpan EPS. Metalcraft COMMERCIAL ROOFING CREPS. Insulated Panel Systems DETAIL LIST
ThermoSpan EPS DETAIL LIST 00 / 15 COVER SHEET 01 / 15 RIDGE DETAIL 02 / 15 HEAD FLASHING DETAIL 03 / 15 EAVES GUTTER DETAIL 04 / 15 INSULATED GUTTER 05 / 15 INSULATED BOX GUTTER 06 / 15 BARGE CAPPING
More information10 YEAR GUARANTEE. Vistalux corrugated sheeting is the ideal general purpose PVC sheet for roofing and cladding PVC SHEET WITH HIGH LIGHT TRANSMISSION
INSTALLATION GUIDE ECONOMICAL PVC SHEET WITH HIGH LIGHT TRANSMISSION 10 YEAR GUARANTEE Vistalux corrugated sheeting is the ideal general purpose PVC sheet for roofing and cladding Economic, lightweight
More informationTECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING
TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING TABLE OF CONTENTS This installation guide provides detailed step-by-step instructions for do-it-yourself projects. We invite you to read it carefully and
More informationFASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS. Value through the Roof.
FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS Value through the Roof. METAL-TO-METAL FASTENERS for CANADA QUIKDRILL METAL2METAL Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value.
More information50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
More informationVerge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip
Tolerance Detail (recommended) Verge Closure Verge Channel Verge Clip Verge Flashing VERGE CHANNEL RIVETTED TO EUROSEAM AT APPROX 400MM CENTRES USING 4.8 X 12MM RIVETS. NB: DO NOT RIVET AT HALTER POSITION
More informationCEILINGS INSTALLATION GUIDE
Your partner in building solutions CEILINGS INSTALLATION GUIDE Your partner in building solutions General remarks on Eterpan Ceilings This installation guide is to be used in conjunction with: Pacific
More informationSpecifications. Model
KS500/1000 ZIP/Zero ODP/LPCB Standing Seam Roof System Standard External and Internal Environments Aluminium External / Steel Liner - LPS Grade EXT-B NBS Format Specification H43 - Metal Composite Panel
More information#14 ¾" A 5 #14 1" A 5 #14 1-½" A 5 #17 1" AB 3 #14 ¾" A 3 #14 1" A 3 #14 1½" A 3
ACCESSORIES SELF-TAPPING CARBON STEEL #14 ¾" A 5 16" 13.2# 81.00 95.25 #14 1" A 5 16" 17.0# 94.90 109.15 #14 1-½" A 5 16" 21.0# 110.80 125.05 #17 1" AB 5 16" 16.0# 158.25 172.50 when using this type of
More informationSpeedDeck. Fixing and Handling Guide
SpeedDeck Section 1 Delivery/Storing On Site/Handling l SpeedDeck is factory or on-site manufactured. l Straight SpeedDeck bundles are a maximum 1 tonne, sheets nestled and banded with polypropylene or
More informationDIVISION 6 WOOD AND PLASTICS
DIVISION 6 WOOD AND PLASTICS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.
More informationRoll-Fix Kit The complete dry hip kit RFIG
H I P Roll-Fix Kit The complete dry hip kit RFIG.045-0906-1 Roll-Fix is a quick and simple dry-fix roofing kit for hips. l Quick and easy to install no special tools required l Universal application fits
More informationDRYSTAND INSTALLATION MANUAL
DRYSTAND INSTALLATION MANUAL WWW.ROOFSCREEN.COM Toll Free 866 766 3727 Introduction... 2 This manual... 2 Application... 2 System Overview... 2 Components... 2 Round Post Supports (BS50)... 2 Telescoping
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 06 1053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Division 01 Specification
More informationSwivel Sector Radial Penstock
Swivel Sector Radial Penstock 24/03/2015 - TAINTOR type radial penstock. - Mechanically welded stopboard with sectoral shape, fitted with side wheels to guarantee correct guiding of the penstock throughout
More informationSeries Sloped glazed Curtain wall. Installation Instructions
Series 5600 Sloped glazed Curtain wall Installation Instructions Part NO. Y308 February 2013 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines. 3-4 II. Gutter and Mullion Assembly.. 5 III. End
More informationmanthorpe Roll-Out Dry Fix Ridge System building products Fixing Instructions MBP 8265e
manthorpe building products Roll-Out Dry Fix Ridge System Fixing Instructions MBP 8265e Ridge Details Fig A. Assembly View of Dry Ridge Detail s/s screw clamping plate rubber washer foam spacer ridge tile
More informationAIA Specification. Section Slate Shingles PART 1 GENERAL
AIA Specification Section 07315 Slate Shingles PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationPanel Installation Instructions
EXTREMELY IMPORTANT INFORMATION PLEASE READ ENTIRE PACKET! Warranty Is Void If Panels Not Installed According to Instructions 1. WARNINGS & SPECIAL NOTES 1.1 Keep panels 24 from Heaters and shield Radiant
More informationMETRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
More informationInstallation Recommendations for Finless Frame Doors
Installation Recommendations for Finless Frame Doors These installation recommendations are made available by MI Windows and Doors, LLC (MI) to assist with the integration of finless or flange sliding
More informationHardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
More informationMETAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD. Value through the Roof.
METAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value. Value drives everything we do. That s why our exclusive Weather-Tite
More informationOUR QUALITY POLICY VISION MISSION
AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant
More informationGeneral guidance. L20Doors/ Shutters/ Hatches. 1 Fire doors
Doors/ Shutters/ Hatches General guidance 1 Fire doors 1 Fire Doors For guidance on specifying fire resisting doors, see: BS 8214. TRADA Wood Information, Section 1, sheet 13. Both the Building Regulations
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show
More informationCFDTT-01. Control Joint Study (General)
Trim Method Classic Method Notes: Control joints are required and should be located by the designer at the following locations on the construction documents: 144 sf (13.4 sm) is the maximum overall area
More informationWilks and Dek-King are registered trade marks of Wilks (Rubber Plastics) Mfgs Co Ltd.
Fitting Guide: Rigid PVC Fendering & Stainless Steel Insert Woodrolfe Road Tollesbury Essex CM9 8RY England Tel: +44 (0)1621 869609 Fax: +44 (0)1621 868863 Email: sales@wilks.co.uk Web: Version: 12.1 Wilks
More informationSpeedZip. Fixing and Handling Guide
Section 1 Delivery/Storing On Site/Handling l SpeedZip is factory or on-site manufactured. l Straight SpeedZip bundles are a maximum 1 tonne, 2 No. sheets nestled and then and placed face to face, banded
More informationThe Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA
TRS 9 35MM 78MM 150MM 78MM THICKNESS END SPAN INTERNAL SPAN MINIMUM PITCH 0.55MM 2.30M 3.20M 3 DESCRIPTION TRS 9 profile is designed for commercial and industrial roofing. The profile is suitable for low
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationACCESSORIES #14 1" A 5 #14 1-½" A 5 #17 1" AB 5. Note: Fasteners sold in quantities of 250 only. #14 1" A 3 #14 1½" A 3 #17 1" AB 3
SELF-TAPPING CARBON STEEL #14 ¾" A 5 16" 13.2# 81.00 95.25 #14 1" A 5 16" 17.0# 94.90 109.15 #14 1-½" A 5 16" 21.0# 110.80 125.05 #17 1" AB 5 16" 16.0# 158.25 172.50 when using this type of fastener 304
More informationSELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
More informationInstructions for Installation on a Pitched Roof LIGHTWAY optical tube LW 260, LW 320, LW 520, LW 760
Lightway, s.r.o. Registered office: Ledvinova 1714, 149 00 Praha 4 Offices: Za Humny 1054/4a, 161 00 Praha 6 tel.: 235 300 694, fax: 235 300 218 Company ID No.: 63669366, Tax ID No.: CZ63669366 Bank: KB
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationEuropean Technical Assessment. ETA-08/0285 of General Part. Technical Assessment Body issuing the ETA:
Member of SINTEF Building and Infrastructure P.O.Box 124 Blindern NO-0314 Oslo, Norway Phone +47 73 59 30 00 e-mail: certification@sintef.no www.eota.eu European Technical Assessment ETA-08/0285 of 2018-09-01
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationComponents Catalog. Mounting Systems. Version 18.01, updated: 05/25/2018
Components Catalog Mounting Systems Version 18.01, updated: 05/25/2018 1 Index IBC TopFix 200 Components... 5 Roof Tiles... 6 Roof Hook Alu-Vario S+... 6 Roof Hook Alu-Mammut S+... 6 Roof Hook Alu-Mammut
More information. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R Index Legal Disclaimer 4 Profile Identification 5-7 Hardware Identification 8
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R VISTAFOLD SYSTEM PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: June 2013 . crealco V I S TA F O L D B O T
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationMetal Roof Installation Manual. Chapter 14: Fasteners
Metal Roof Installation Manual Chapter 14: Fasteners Chapter 14: Fasteners Chapter Contents 14. Introduction... 14-1 14.1 Fastener Parts and Installation... 14-1 14.1.1 Points... 14-1 14.1.2 Heads... 14-1
More informationHow To Install Windows: Nail-Fin Application
How To Install Windows: Nail-Fin Application Required Tools & Materials: Materials: 1 3/4" galvanized roofing nails. Nails must penetrate at least 1" into framing For mulled and/or DP50 or above units:
More informationFASTENERS. Specialist in Hi-Tensile & Mild Steel
FASTENERS Specialist in Hi-Tensile & Mild Steel Fasteners Business Established in 2003, Karamtara's Fasteners business vertical provides truly global services. We provide special industrial fasteners to
More informationFastening material. Lindab 1. General information and theory 2. Safe 3. Silencers 4. Dampers & Measure units 5. Fire dampers & Smoke evacuation
Fastening material Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods Other circular products Transfer 0 Rectangular Flexible
More informationCARES Technical Approval Report TA1-B 5042
CARES Technical Approval Report TA1-B 5042 Issue 4 Dextra ROLLTEC Standard, Positional and Caging Couplers Assessment of the Dextra ROLLTEC Standard, Positional and Caging Coupler Product and Quality System
More informationInstallation Instructions
Installation Instructions Alpha SolarSmart On Roof Kits for the Installation of Alpha Solar Collectors onto Tile and Slate Type Roofs For Technical help or for Service call... ALPHA HELPLINE Tel: 0 77
More information4256HM JAMES HARDIE MONOLITHIC CLADDING
4256HM JAMES HARDIE MONOLITHIC CLADDING 1. GENERAL This section relates to the supply and fixing of fibre cement flush finish cladding: - James Hardie Monotek Sheet for textured coating systems - James
More informationFastener Design. Fastener Materials. Coated Corrosion-Resistant Fasteners. Metal Alloy Capped Fasteners
Threaded fasteners for roofing and siding systems are available in a wide range of materials, designs, and coatings. When specifying your fastener, be sure to choose one that has a performance life equaling
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationUNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationMULTI-STORY FIRE STOPPING ASSEMBLY FRAMED OPENING JAMB (LOW CELL) INDEX SHEET
KPH-DS-01-MTLV KPH-PP-01-MTLV KPH-PP-02-MTLV KPH-PJ-01-MTLV KPH-PJ-02-MTLV KPH-PJ-03-MTLV KPH-PJ-04-MTLV KPH-PJ-05-MTLV KPH-FS-01-MTLV KPH-FS-02-MTLV KPH-FS-03-MTLV KPH-BS-01-MTLV KPH-BS-02-MTLV KPH-BS-03-MTLV
More informationSecuAnch Roof Anchor System
Height Safety Products Email: marketing@fallprotec.com SecuAnch Roof Anchor System 1 Presentation The SecuAnch lifeline is designed to be permanently installed on buildings and other structures where maintenance
More information2004 Bigfoot Truck Camper Floor Rot Repair
The following is how I repaired my Bigfoot Camper as an owner. I am not a professional, Any further floor rot would have required removal of the lower cabinets, a big job. Image 1 Damaged floor (Spongy
More informationL 10 WINDOWS / ROOFLIGHTS / SCREENS / LOUVRES
L 10 WINDOWS / ROOFLIGHTS / SCREENS / LOUVRES 320 STEEL WINDOWS AND DOORS - Manufacturer: Steel Window Service and Supplies Limited, 30 Oxford Road, London N4 3EY Tel: 020 7272 2294, Fax: 020 7281 2309,
More informationBalaji THE COMPANY MISSION
82, GANGOTRI INDUSTRIAL ESTATE, OPP. PANCHRATNA ESTATE, NR. RAMOL OVER BRIDGE, VATVA-382445.(GUJARAT), INDIA. Website : www.balajifasteners.co.in E-mail : info@balajifasteners.co.in OUR QUALITY POLICY
More informationTable of Contents. Notes to Designer/User Map of Typical Roof Conditions Fastener Placement Fastener Selection...
Table of Contents Section Page Notes to Designer/User... 2-3 Map of Typical Roof Conditions... 4 Fastener Placement... 5 Fastener Selection... 6 Ridge/Hip Flashing... 7 Valley Flashing... 8 Eave Flashings...
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationFaçade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL
Façade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL These application instructions are specifically intended for the fastening of
More informationREDLAND DRY VALLEY. Installation Instructions for Redland Dry Valley. Version: 6. Date: May Redland Technical Solutions
REDLAND DRY VALLEY Installation Instructions for Redland Dry Valley Version: 6 Date: May 2013 Author: Department: Redland Technical Solutions Redland Technical Solutions 1 Introduction 1.1 TECHNICAL DATA
More information1. CONNOLLY KEYJOINT 1. PRODUCT NAME 2. SUPPLIER 3. PRODUCT DESCRIPTION 4. KEY FEATURES 5. FIXING INSTRUCTIONS 6. SPECIFICATIONS 7.
1. CONNOLLY KEYJOINT 1. PRODUCT NAME 2. SUPPLIER 3. PRODUCT DESCRIPTION 4. KEY FEATURES 5. FIXING INSTRUCTIONS 6. SPECIFICATIONS 7. CAPPING STRIPS 8. WELDED FOOT AND PEG 2. SUPPLIER Canzac Ltd 3 Parkhouse
More informationDIVISION 6 WOODS AND PLASTICS SECTION ROUGH CARPENTRY
DIVISION 6 WOODS AND PLASTICS SECTION 06 10 00 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationThreadlocking Adhesives
Threadlocking Adhesives Locking of Threaded Fasteners Why use a Threadlocker? threadlocking products prevent self-loosening and secure any threaded fastener against vibration and shock loads. They are
More informationSHEET METAL FLASHING AND TRIM Christ on the Mountain
SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.
More informationCembrit Patina. Cembrit Cover. Cembrit Solid. Cembrit Transparent
Rainscreen Cladding Your choice. In addition to the range of colours and shades, Cembrit cladding boards are available in four compositions, each with distinctive performance and characteristics. Cembrit
More informationPlease direct powder-actuated and screw fastening technical inquiries to your local Hilti Field Engineer or Technical Support at
Section 3.1.2.8 Screws should only be used in non-corrosive applications, regardless of their coating, unless they are specifically listed as being suitable for outdoor or exposed conditions. More detailed
More informationSPAN-LINE 36A. Panel Information. Flashing Profiles. Accessory Profiles. Testing Information. Design/Installation Considerations.
Product Table of ontents Page No. Panel Information Span-Line 6A Panel Profile... PSP-2 Panel Overview... PSP-2 Flashing Profiles Span-Line 6A Inside orner... PSP- Span-Line 6A Outside orner... PSP- 1.5"
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS A CSW Industrials Company FR and FRE Roof Expansion Joint Covers IMPORTANT The following instructions are very important. Read them carefully, and be sure you understand them
More informationAccess Risers and Tank Adapters
Access Risers and Tank Adapters Installation Instructions Access risers provide access to septic tank openings, simplifying inspection and maintenance procedures. It is important that the riser be sized
More informationStabalux T. 5.0 Stabalux T 1
5.0 1 5.1 - System 2 5.1.1 System properties 2 5.1.2 System profiles 6 5.2 - Processing information 9 5.2.1 Mullion-transom joint 9 5.3 - Design 11 5.3.1 System cross sections 11 5.3.2 Notes 13 System
More informationDOCK WEDGE - STANDARD
DOCK WEDGE - STANDARD INSTALLATION INSTRUCTIONS WOOD HEADER READ ALL INSTRUCTIONS BEFORE INSTALLING SEAL. SUPER SEAL MFG. LTD. WILL NOT BE HELD RESPONSIBLE FOR IMPROPER INSTALLATION OF ANCHORING DEVICES,
More informationMETHOD STATEMENT. Sika FloorJoint S
METHOD STATEMENT Table of Contents 1 SCOPE 3 2 PRODUCT 3 2.1 3 3 SUBSTRATE REQUIREMENTS 3 4 Preparation of the Substrate 3 4.1 Mapping of the joint panels on the floor for the saw cuts 3 4.2 Execution
More informationInstallation Manual. Last Updated 4 February, Postal PO Box 932 Bayswater VIC
Installation Manual Last Updated 4 February, 2013 Part 1: Provided Material The Panel Expandable Foam Sealing Strip Barge Capping Z-Fascia Structural Screws Timber: 3/8 head size Metal: 5/16 head size
More informationSEAL PLATE SP4413 VERTICAL SP4414 1"[25] VERT. PANEL JTS. 1/2"[13] INTERM. SPLICES DESIGN LOADS AND SLAB EDGE DISTANCES. 1 2 NOM.
3 COL 5 16GA. ANGLE SP4413 VERTICAL SEE SUPPORT DRAINGS 1 7/16 SEAL PLATE @ VERT. JNT 1/2 [13] Ă DETAILER NOTE OPTIONAL INSULATION HEN REQUIRED. OF SEAL PLATE PANEL MODULE 2.500 FROM SHELF OF TR. TO TOP
More information